summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h594
1 files changed, 374 insertions, 220 deletions
diff --git a/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h b/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h
index f9ef7d8c1c..59f47e7b94 100644
--- a/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h
+++ b/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h
@@ -1,16 +1,16 @@
/** @file
- The Header file of the Pci Host Bridge Driver
+ The Header file of the Pci Host Bridge Driver
Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials are
- licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
-
+
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
+**/
#ifndef _PCI_HOST_BRIDGE_H_
#define _PCI_HOST_BRIDGE_H_
@@ -72,68 +72,114 @@ typedef struct {
//
/**
- These are the notifications from the PCI bus driver that it is about to enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data
- structures. The PCI enumerator should issue this notification
- before starting a fresh enumeration process. Enumeration cannot
- be restarted after sending any other notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is
- required here. This notification can be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No
- specific action is required here. This notification can be used to
- perform any chipset-specific programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is about to begin. No specific
- action is required here. This notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI
- root bridges. These resource settings are returned on the next call to
- GetProposedResources(). Before calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible
- for gathering I/O and memory requests for
- all the PCI root bridges and submitting these requests using
- SubmitResources(). This function pads the resource amount
- to suit the root bridge hardware, takes care of dependencies between
- the PCI root bridges, and calls the Global Coherency Domain (GCD)
- with the allocation request. In the case of padding, the allocated range
- could be bigger than what was requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated
- resources (proposed resources) for all the PCI root bridges. After the
- hardware is programmed, reassigning resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI
- root bridges and resets the I/O and memory apertures to their initial
- state. The bus settings are not affected. If the request to allocate
- resources fails, the PCI enumerator can use this notification to
- deallocate previous resources, adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is
- required here. This notification can be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error
- is valid for a Phase of EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any errors.
-
+ These are the notifications from the PCI bus driver that it is about to enter
+ a certain phase of the PCI enumeration process.
+
+ This member function can be used to notify the host bridge driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Eight notification points are
+ defined at this time. See belows:
+
+ EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures
+ and internal data structures. The PCI
+ enumerator should issue this
+ notification before starting a fresh
+ enumeration process. Enumeration
+ cannot be restarted after sending any
+ other notification such as
+ EfiPciHostBridgeBeginBusAllocation.
+
+ EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to
+ begin. No specific action is required
+ here. This notification can be used to
+ perform any chipset-specific
+ programming.
+
+ EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming
+ phase is complete. No specific action
+ is required here. This notification
+ can be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeBeginResourceAllocation
+ The resource allocation phase is about
+ to begin. No specific action is
+ required here. This notification can
+ be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeAllocateResources Allocates resources per previously
+ submitted requests for all the PCI
+ root bridges. These resource settings
+ are returned on the next call to
+ GetProposedResources(). Before calling
+ NotifyPhase() with a Phase of
+ EfiPciHostBridgeAllocateResource, the
+ PCI bus enumerator is responsible for
+ gathering I/O and memory requests for
+ all the PCI root bridges and
+ submitting these requests using
+ SubmitResources(). This function pads
+ the resource amount to suit the root
+ bridge hardware, takes care of
+ dependencies between the PCI root
+ bridges, and calls the Global
+ Coherency Domain (GCD) with the
+ allocation request. In the case of
+ padding, the allocated range could be
+ bigger than what was requested.
+
+ EfiPciHostBridgeSetResources Programs the host bridge hardware to
+ decode previously allocated resources
+ (proposed resources) for all the PCI
+ root bridges. After the hardware is
+ programmed, reassigning resources will
+ not be supported. The bus settings are
+ not affected.
+
+ EfiPciHostBridgeFreeResources Deallocates resources that were
+ previously allocated for all the PCI
+ root bridges and resets the I/O and
+ memory apertures to their initial
+ state. The bus settings are not
+ affected. If the request to allocate
+ resources fails, the PCI enumerator
+ can use this notification to
+ deallocate previous resources, adjust
+ the requests, and retry allocation.
+
+ EfiPciHostBridgeEndResourceAllocation The resource allocation phase is
+ completed. No specific action is
+ required here. This notification can
+ be used to perform any chipsetspecific
+ programming.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] Phase The phase during enumeration
+
+ @retval EFI_NOT_READY This phase cannot be entered at this time. For
+ example, this error is valid for a Phase of
+ EfiPciHostBridgeAllocateResources if
+ SubmitResources() has not been called for one
+ or more PCI root bridges before this call
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ This error is valid for a Phase of
+ EfiPciHostBridgeSetResources.
+
+ @retval EFI_INVALID_PARAMETER Invalid phase parameter
+
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources. This error is valid for a
+ Phase of EfiPciHostBridgeAllocateResources if
+ the previously submitted resource requests
+ cannot be fulfilled or were only partially
+ fulfilled.
+
+ @retval EFI_SUCCESS The notification was accepted without any
+ errors.
**/
EFI_STATUS
EFIAPI
@@ -143,26 +189,38 @@ NotifyPhase(
);
/**
- Return the device handle of the next PCI root bridge that is associated with this Host Bridge.
-
- This function is called multiple times to retrieve the device handles of all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous call is passed into the
- interface, and on output the interface returns the device handle of the next PCI root bridge. The
- caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report, the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
- returned on a previous call to GetNextRootBridge().
+ Return the device handle of the next PCI root bridge that is associated with
+ this Host Bridge.
+
+ This function is called multiple times to retrieve the device handles of all
+ the PCI root bridges that are associated with this PCI host bridge. Each PCI
+ host bridge is associated with one or more PCI root bridges. On each call,
+ the handle that was returned by the previous call is passed into the
+ interface, and on output the interface returns the device handle of the next
+ PCI root bridge. The caller can use the handle to obtain the instance of the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for that root bridge. When there are no more
+ PCI root bridges to report, the interface returns EFI_NOT_FOUND. A PCI
+ enumerator must enumerate the PCI root bridges in the order that they are
+ returned by this function.
+
+ For D945 implementation, there is only one root bridge in PCI host bridge.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in, out] RootBridgeHandle Returns the device handle of the next PCI
+ root bridge.
+
+ @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then
+ return the first Rootbridge handle of the
+ specific Host bridge and return EFI_SUCCESS.
+
+ @retval EFI_NOT_FOUND Can not find the any more root bridge in
+ specific host bridge.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
+ returned on a previous call to
+ GetNextRootBridge().
**/
EFI_STATUS
EFIAPI
@@ -170,45 +228,65 @@ GetNextRootBridge(
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
IN OUT EFI_HANDLE *RootBridgeHandle
);
-
+
/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from the decode-related
- attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device
- handles of all the root bridges that are associated with this host bridge must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do not change during or
- after the enumeration process. The hardware may provide mechanisms to change the attributes on
- the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------ ----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate
- windows for nonprefetchable and prefetchable memory. A PCI bus
- driver needs to include requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory
- windows. If this bit is not set, the PCI bus driver needs to include
- requests for a 64-bit memory address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type
- EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root bridge.
-
-**/
+ Returns the allocation attributes of a PCI root bridge.
+
+ The function returns the allocation attributes of a specific PCI root bridge.
+ The attributes can vary from one PCI root bridge to another. These attributes
+ are different from the decode-related attributes that are returned by the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
+ RootBridgeHandle parameter is used to specify the instance of the PCI root
+ bridge. The device handles of all the root bridges that are associated with
+ this host bridge must be obtained by calling GetNextRootBridge(). The
+ attributes are static in the sense that they do not change during or after
+ the enumeration process. The hardware may provide mechanisms to change the
+ attributes on the fly, but such changes must be completed before
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is installed. The permitted
+ values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
+ "Related Definitions" below. The caller uses these attributes to combine
+ multiple resource requests.
+
+ For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI
+ bus enumerator needs to include requests for the prefetchable memory in the
+ nonprefetchable memory pool and not request any prefetchable memory.
+
+ Attribute Description
+ ------------------------------------ ---------------------------------------
+ EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root
+ bridge does not support separate
+ windows for nonprefetchable and
+ prefetchable memory. A PCI bus driver
+ needs to include requests for
+ prefetchable memory in the
+ nonprefetchable memory pool.
+
+ EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root
+ bridge supports 64-bit memory windows.
+ If this bit is not set, the PCI bus
+ driver needs to include requests for a
+ 64-bit memory address in the
+ corresponding 32-bit memory pool.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] RootBridgeHandle The device handle of the PCI root bridge in
+ which the caller is interested. Type
+ EFI_HANDLE is defined in
+ InstallProtocolInterface() in the UEFI 2.0
+ Specification.
+
+ @param[out] Attributes The pointer to attribte of root bridge, it is
+ output parameter
+
+ @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
+
+ @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
+
+ @retval EFI_SUCCESS Success to get attribute of interested root
+ bridge.
+**/
EFI_STATUS
EFIAPI
GetAttributes(
@@ -216,21 +294,28 @@ GetAttributes(
IN EFI_HANDLE RootBridgeHandle,
OUT UINT64 *Attributes
);
-
+
/**
- Sets up the specified PCI root bridge for the bus enumeration process.
+ Sets up the specified PCI root bridge for the bus enumeration process.
+
+ This member function sets up the root bridge for bus enumeration and returns
+ the PCI bus range over which the search should be performed in ACPI 2.0
+ resource descriptor format.
+
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
- This member function sets up the root bridge for bus enumeration and returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor format.
+ @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
+ @param[out] Configuration Pointer to the pointer to the PCI bus resource
+ descriptor.
+ @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
+
+ @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
+
+ @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
**/
EFI_STATUS
EFIAPI
@@ -239,30 +324,52 @@ StartBusEnumeration(
IN EFI_HANDLE RootBridgeHandle,
OUT VOID **Configuration
);
-
+
/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI bus range.
-
- This member function programs the specified PCI root bridge to decode the bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed.
+ Programs the PCI root bridge hardware so that it decodes the specified PCI
+ bus range.
+
+ This member function programs the specified PCI root bridge to decode the bus
+ range that is specified by the input parameter Configuration.
+ The bus range information is specified in terms of the ACPI 2.0 resource
+ descriptor format.
+
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance
+
+ @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be
+ programmed
+
+ @param[in] Configuration The pointer to the PCI bus resource descriptor
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI
+ 2.0 bus resource descriptor.
+ @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource
+ descriptors other than bus descriptors.
+
+ @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid
+ ACPI resource descriptors.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this
+ root bridge.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+
+ @retval EFI_SUCCESS The bus range for the PCI root bridge was
+ programmed.
**/
EFI_STATUS
EFIAPI
@@ -271,31 +378,52 @@ SetBusNumbers(
IN EFI_HANDLE RootBridgeHandle,
IN VOID *Configuration
);
-
+
/**
- Submits the I/O and memory resource requirements for the specified PCI root bridge.
+ Submits the I/O and memory resource requirements for the specified PCI root
+ bridge.
- This function is used to submit all the I/O and memory resources that are required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
+ This function is used to submit all the I/O and memory resources that are
+ required by the specified PCI root bridge. The input parameter Configuration
+ is used to specify the following:
+ - The various types of resources that are required
+ - The associated lengths in terms of ACPI 2.0 resource descriptor format
+
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory
+ resource requirements are being submitted.
+
+ @param[in] Configuration The pointer to the PCI I/O and PCI memory
+ resource descriptor.
+
+ @retval EFI_SUCCESS The I/O and memory resource requests for a PCI
+ root bridge were accepted.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are
- not supported by this PCI root bridge. This error will happen if the caller
- did not combine resources according to Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration includes requests for one or
+ more resource types that are not supported by
+ this PCI root bridge. This error will happen
+ if the caller did not combine resources
+ according to Attributes that were returned by
+ GetAllocAttributes().
+
+ @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for
+ this PCI root bridge.
**/
EFI_STATUS
EFIAPI
@@ -304,26 +432,38 @@ SubmitResources(
IN EFI_HANDLE RootBridgeHandle,
IN VOID *Configuration
);
-
+
/**
Returns the proposed resource settings for the specified PCI root bridge.
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
+ This member function returns the proposed resource settings for the
+ specified PCI root bridge. The proposed resource settings are prepared when
+ NotifyPhase() is called with a Phase of EfiPciHostBridgeAllocateResources.
+ The output parameter Configuration specifies the following:
+ - The various types of resources, excluding bus resources, that are
+ allocated
- The associated lengths in terms of ACPI 2.0 resource descriptor format
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is
+ defined in InstallProtocolInterface() in the
+ UEFI 2.0 Specification.
+
+ @param[out] Configuration The pointer to the pointer to the PCI I/O and
+ memory resource descriptor.
+
@retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
@retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources.
**/
EFI_STATUS
EFIAPI
@@ -334,31 +474,46 @@ GetProposedResources(
);
/**
- Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific action is expected from this
- member function. It allows the host bridge driver to preinitialize individual PCI controllers before
- enumeration.
-
- @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI
- configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for
- the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in
- EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should
- not enumerate this device, including its child devices if it is a PCI-to-PCI
- bridge.
-
+ Provides the hooks from the PCI bus driver to every PCI controller
+ (device/function) at various stages of the PCI enumeration process that allow
+ the host bridge driver to preinitialize individual PCI controllers before
+ enumeration.
+
+ This function is called during the PCI enumeration process. No specific
+ action is expected from this member function. It allows the host bridge
+ driver to preinitialize individual PCI controllers before enumeration.
+
+ @param This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param RootBridgeHandle The associated PCI root bridge handle. Type
+ EFI_HANDLE is defined in InstallProtocolInterface()
+ in the UEFI 2.0 Specification.
+
+ @param PciAddress The address of the PCI device on the PCI bus. This
+ address can be passed to the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to
+ access the PCI configuration space of the device.
+ See Table 12-1 in the UEFI 2.0 Specification for the
+ definition of
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
+
+ @param Phase The phase of the PCI device enumeration.
+
+ @retval EFI_SUCCESS The requested parameters were returned.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined
+ in
+ EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ The PCI enumerator should not enumerate this
+ device, including its child devices if it is
+ a PCI-to-PCI bridge.
**/
EFI_STATUS
EFIAPI
@@ -371,7 +526,7 @@ PreprocessController (
//
-// Define resource status constant
+// Define resource status constant
//
#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL
#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL
@@ -482,7 +637,6 @@ typedef struct {
@param ResAperture ResourceAperture for host bridge
@retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
**/
EFI_STATUS
RootBridgeConstructor (