diff options
14 files changed, 0 insertions, 2514 deletions
diff --git a/IntelFrameworkPkg/Include/Framework/StatusCodeDataTypeId.h b/IntelFrameworkPkg/Include/Framework/StatusCodeDataTypeId.h index 7feb12741d..bbac633969 100644 --- a/IntelFrameworkPkg/Include/Framework/StatusCodeDataTypeId.h +++ b/IntelFrameworkPkg/Include/Framework/StatusCodeDataTypeId.h @@ -25,11 +25,6 @@ #include <Protocol/DebugSupport.h>
///
-/// The size of string
-///
-#define EFI_STATUS_CODE_DATA_MAX_STRING_SIZE 150
-
-///
/// This is the max data size including all the headers which can be passed
/// as Status Code data. This data should be multiple of 8 byte
/// to avoid any kind of boundary issue. Also, sum of this data size (inclusive
@@ -64,19 +59,6 @@ typedef struct { #pragma pack()
-#pragma pack(1)
-
-typedef struct {
- UINT32 ErrorLevel;
- //
- // 12 * sizeof (UINT64) Var Arg stack
- //
- // ascii DEBUG () Format string
- //
-} EFI_DEBUG_INFO;
-
-#pragma pack()
-
//
// declaration for EFI_EXP_DATA. This may change
//
diff --git a/IntelFrameworkPkg/IntelFrameworkPkg.dsc b/IntelFrameworkPkg/IntelFrameworkPkg.dsc index be3fdd820b..95d616073d 100644 --- a/IntelFrameworkPkg/IntelFrameworkPkg.dsc +++ b/IntelFrameworkPkg/IntelFrameworkPkg.dsc @@ -52,12 +52,9 @@ #
################################################################################
[Components.common]
- IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.inf
- IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf
IntelFrameworkPkg/Library/DxeIoLibCpuIo/DxeIoLibCpuIo.inf
IntelFrameworkPkg/Library/UefiLibFramework/UefiLibFramework.inf
IntelFrameworkPkg/Library/DxeSmmDriverEntryPoint/DxeSmmDriverEntryPoint.inf
IntelFrameworkPkg/Library/HiiLibFramework/HiiLib.inf
- IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
IntelFrameworkPkg/Library/IfrSupportLibFramework/IfrSupportLib.inf
IntelFrameworkPkg/Library/PeiSmbusLibSmbusPpi/PeiSmbusLibSmbusPpi.inf
diff --git a/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.c b/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.c deleted file mode 100644 index a395f0a071..0000000000 --- a/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.c +++ /dev/null @@ -1,532 +0,0 @@ -/** @file
- Report Status Code Library for DXE Phase.
-
- Copyright (c) 2006 - 2007, Intel Corporation<BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include <Base.h>
-#include <Framework/StatusCodeDataTypeId.h>
-#include <Framework/StatusCode.h>
-
-#include <Guid/StatusCodeDataTypeId.h>
-#include <Library/ReportStatusCodeLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/PcdLib.h>
-
-
-
-/**
- Internal worker function that reports a status code through the Status Code Protocol
-
- This function checks to see if a Status Code Protocol is present in the handle
- database. If a Status Code Protocol is not present, then EFI_UNSUPPORTED is
- returned. If a Status Code Protocol is present, then it is cached in gStatusCode,
- and the ReportStatusCode() service of the Status Code Protocol is called passing in
- Type, Value, Instance, CallerId, and Data. The result of this call is returned.
-
- @param Type Status code type.
- @param Value Status code value.
- @param Instance Status code instance number.
- @param CallerId Pointer to a GUID that identifies the caller of this
- function. This is an optional parameter that may be
- NULL.
- @param Data Pointer to the extended data buffer. This is an
- optional parameter that may be NULL.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to report the status code.
- @retval EFI_UNSUPPORTED Status Code Protocol is not available.
-
-**/
-STATIC
-EFI_STATUS
-InternalReportStatusCode (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN CONST EFI_GUID *CallerId OPTIONAL,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- )
-{
- return EFI_SUCCESS;
-}
-
-
-/**
- Computes and returns the size, in bytes, of a device path.
-
- @param DevicePath A pointer to a device path.
-
- @return The size, in bytes, of DevicePath.
-
-**/
-STATIC
-UINTN
-InternalReportStatusCodeDevicePathSize (
- IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- CONST EFI_DEVICE_PATH_PROTOCOL *Start;
-
- //
- // Search for the end of the device path structure
- //
- Start = DevicePath;
- while (!EfiIsDevicePathEnd (DevicePath)) {
- DevicePath = EfiNextDevicePathNode (DevicePath);
- }
-
- //
- // Subtract the start node from the end node and add in the size of the end node
- //
- return ((UINTN) DevicePath - (UINTN) Start) + DevicePathNodeLength (DevicePath);
-}
-
-
-/**
- Converts a status code to an 8-bit POST code value.
-
- Converts the status code specified by CodeType and Value to an 8-bit POST code
- and returns the 8-bit POST code in PostCode. If CodeType is an
- EFI_PROGRESS_CODE or CodeType is an EFI_ERROR_CODE, then bits 0..4 of PostCode
- are set to bits 16..20 of Value, and bits 5..7 of PostCode are set to bits
- 24..26 of Value., and TRUE is returned. Otherwise, FALSE is returned.
-
- If PostCode is NULL, then ASSERT().
-
- @param CodeType The type of status code being converted.
- @param Value The status code value being converted.
- @param PostCode A pointer to the 8-bit POST code value to return.
-
- @retval TRUE The status code specified by CodeType and Value was converted
- to an 8-bit POST code and returned in PostCode.
- @retval FALSE The status code specified by CodeType and Value could not be
- converted to an 8-bit POST code value.
-
-**/
-BOOLEAN
-EFIAPI
-CodeTypeToPostCode (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- OUT UINT8 *PostCode
- )
-{
- //
- // If PostCode is NULL, then ASSERT()
- //
- ASSERT (PostCode != NULL);
-
- //
- // Convert Value to an 8 bit post code
- //
- if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) ||
- ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) ) {
- *PostCode = (UINT8) ((((Value & EFI_STATUS_CODE_CLASS_MASK) >> 24) << 5) |
- (((Value & EFI_STATUS_CODE_SUBCLASS_MASK) >> 16) & 0x1f));
- return TRUE;
- }
- return FALSE;
-}
-
-
-/**
- Extracts ASSERT() information from a status code structure.
-
- Converts the status code specified by CodeType, Value, and Data to the ASSERT()
- arguments specified by Filename, Description, and LineNumber. If CodeType is
- an EFI_ERROR_CODE, and CodeType has a severity of EFI_ERROR_UNRECOVERED, and
- Value has an operation mask of EFI_SW_EC_ILLEGAL_SOFTWARE_STATE, extract
- Filename, Description, and LineNumber from the optional data area of the
- status code buffer specified by Data. The optional data area of Data contains
- a Null-terminated ASCII string for the FileName, followed by a Null-terminated
- ASCII string for the Description, followed by a 32-bit LineNumber. If the
- ASSERT() information could be extracted from Data, then return TRUE.
- Otherwise, FALSE is returned.
-
- If Data is NULL, then ASSERT().
- If Filename is NULL, then ASSERT().
- If Description is NULL, then ASSERT().
- If LineNumber is NULL, then ASSERT().
-
- @param CodeType The type of status code being converted.
- @param Value The status code value being converted.
- @param Data Pointer to status code data buffer.
- @param Filename Pointer to the source file name that generated the ASSERT().
- @param Description Pointer to the description of the ASSERT().
- @param LineNumber Pointer to source line number that generated the ASSERT().
-
- @retval TRUE The status code specified by CodeType, Value, and Data was
- converted ASSERT() arguments specified by Filename, Description,
- and LineNumber.
- @retval FALSE The status code specified by CodeType, Value, and Data could
- not be converted to ASSERT() arguments.
-
-**/
-BOOLEAN
-EFIAPI
-ReportStatusCodeExtractAssertInfo (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST EFI_STATUS_CODE_DATA *Data,
- OUT CHAR8 **Filename,
- OUT CHAR8 **Description,
- OUT UINT32 *LineNumber
- )
-{
- EFI_DEBUG_ASSERT_DATA *AssertData;
-
- ASSERT (Data != NULL);
- ASSERT (Filename != NULL);
- ASSERT (Description != NULL);
- ASSERT (LineNumber != NULL);
-
- if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) &&
- ((CodeType & EFI_STATUS_CODE_SEVERITY_MASK) == EFI_ERROR_UNRECOVERED) &&
- ((Value & EFI_STATUS_CODE_OPERATION_MASK) == EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)) {
- AssertData = (EFI_DEBUG_ASSERT_DATA *)(Data + 1);
- *Filename = (CHAR8 *)(AssertData + 1);
- *Description = *Filename + AsciiStrLen (*Filename) + 1;
- *LineNumber = AssertData->LineNumber;
- return TRUE;
- }
- return FALSE;
-}
-
-
-/**
- Extracts DEBUG() information from a status code structure.
-
- Converts the status code specified by Data to the DEBUG() arguments specified
- by ErrorLevel, Marker, and Format. If type GUID in Data is
- EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID, then extract ErrorLevel, Marker, and
- Format from the optional data area of the status code buffer specified by Data.
- The optional data area of Data contains a 32-bit ErrorLevel followed by Marker
- which is 12 UINTN parameters, followed by a Null-terminated ASCII string for
- the Format. If the DEBUG() information could be extracted from Data, then
- return TRUE. Otherwise, FALSE is returned.
-
- If Data is NULL, then ASSERT().
- If ErrorLevel is NULL, then ASSERT().
- If Marker is NULL, then ASSERT().
- If Format is NULL, then ASSERT().
-
- @param Data Pointer to status code data buffer.
- @param ErrorLevel Pointer to error level mask for a debug message.
- @param Marker Pointer to the variable argument list associated with Format.
- @param Format Pointer to a Null-terminated ASCII format string of a
- debug message.
-
- @retval TRUE The status code specified by Data was converted DEBUG() arguments
- specified by ErrorLevel, Marker, and Format.
- @retval FALSE The status code specified by Data could not be converted to
- DEBUG() arguments.
-
-**/
-BOOLEAN
-EFIAPI
-ReportStatusCodeExtractDebugInfo (
- IN CONST EFI_STATUS_CODE_DATA *Data,
- OUT UINT32 *ErrorLevel,
- OUT VA_LIST *Marker,
- OUT CHAR8 **Format
- )
-{
- EFI_DEBUG_INFO *DebugInfo;
-
- ASSERT (Data != NULL);
- ASSERT (ErrorLevel != NULL);
- ASSERT (Marker != NULL);
- ASSERT (Format != NULL);
-
- //
- // If the GUID type is not EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID then return FALSE
- //
- if (!CompareGuid (&Data->Type, &gEfiStatusCodeDataTypeDebugGuid)) {
- return FALSE;
- }
-
- //
- // Retrieve the debug information from the status code record
- //
- DebugInfo = (EFI_DEBUG_INFO *)(Data + 1);
-
- *ErrorLevel = DebugInfo->ErrorLevel;
-
- //
- // The first 12 * UINTN bytes of the string are really an
- // argument stack to support varargs on the Format string.
- //
- *Marker = (VA_LIST) (DebugInfo + 1);
- *Format = (CHAR8 *)(((UINT64 *)*Marker) + 12);
-
- return TRUE;
-}
-
-
-/**
- Reports a status code.
-
- Reports the status code specified by the parameters Type and Value. Status
- code also require an instance, caller ID, and extended data. This function
- passed in a zero instance, NULL extended data, and a caller ID of
- gEfiCallerIdGuid, which is the GUID for the module.
-
- ReportStatusCode()must actively prevent recusrsion. If ReportStatusCode()
- is called while processing another any other Report Status Code Library function,
- then ReportStatusCode() must return immediately.
-
- @param Type Status code type.
- @param Value Status code value.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_DEVICE_ERROR There status code could not be reported due to a
- device error.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCode (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value
- )
-{
- return InternalReportStatusCode (Type, Value, 0, &gEfiCallerIdGuid, NULL);
-}
-
-
-/**
- Reports a status code with a Device Path Protocol as the extended data.
-
- Allocates and fills in the extended data section of a status code with the
- Device Path Protocol specified by DevicePath. This function is responsible
- for allocating a buffer large enough for the standard header and the device
- path. The standard header is filled in with a GUID of
- gEfiStatusCodeSpecificDataGuid. The status code is reported with a zero
- instance and a caller ID of gEfiCallerIdGuid.
-
- ReportStatusCodeWithDevicePath()must actively prevent recursion. If
- ReportStatusCodeWithDevicePath() is called while processing another any other
- Report Status Code Library function, then ReportStatusCodeWithDevicePath()
- must return EFI_DEVICE_ERROR immediately.
-
- If DevicePath is NULL, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param DevicePath Pointer to the Device Path Protocol to be reported.
-
- @retval EFI_SUCCESS The status code was reported with the extended
- data specified by DevicePath.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the
- extended data section.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeWithDevicePath (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- ASSERT (DevicePath != NULL);
- return ReportStatusCodeWithExtendedData (
- Type,
- Value,
- (VOID *)DevicePath,
- InternalReportStatusCodeDevicePathSize (DevicePath)
- );
-}
-
-
-/**
- Reports a status code with an extended data buffer.
-
- Allocates and fills in the extended data section of a status code with the
- extended data specified by ExtendedData and ExtendedDataSize. ExtendedData
- is assumed to be one of the data structures specified in Related Definitions.
- These data structure do not have the standard header, so this function is
- responsible for allocating a buffer large enough for the standard header and
- the extended data passed into this function. The standard header is filled
- in with a GUID of gEfiStatusCodeSpecificDataGuid. The status code is reported
- with a zero instance and a caller ID of gEfiCallerIdGuid.
-
- ReportStatusCodeWithExtendedData()must actively prevent recursion. If
- ReportStatusCodeWithExtendedData() is called while processing another any other
- Report Status Code Library function, then ReportStatusCodeWithExtendedData()
- must return EFI_DEVICE_ERROR immediately.
-
- If ExtendedData is NULL, then ASSERT().
- If ExtendedDataSize is 0, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param ExtendedData Pointer to the extended data buffer to be reported.
- @param ExtendedDataSize The size, in bytes, of the extended data buffer to
- be reported.
-
- @retval EFI_SUCCESS The status code was reported with the extended
- data specified by ExtendedData and ExtendedDataSize.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the
- extended data section.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeWithExtendedData (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST VOID *ExtendedData,
- IN UINTN ExtendedDataSize
- )
-{
- ASSERT (ExtendedData != NULL);
- ASSERT (ExtendedDataSize != 0);
- return ReportStatusCodeEx (
- Type,
- Value,
- 0,
- NULL,
- NULL,
- ExtendedData,
- ExtendedDataSize
- );
-}
-
-
-/**
- Reports a status code with full parameters.
-
- The function reports a status code. If ExtendedData is NULL and ExtendedDataSize
- is 0, then an extended data buffer is not reported. If ExtendedData is not
- NULL and ExtendedDataSize is not 0, then an extended data buffer is allocated.
- ExtendedData is assumed not have the standard status code header, so this function
- is responsible for allocating a buffer large enough for the standard header and
- the extended data passed into this function. The standard header is filled in
- with a GUID specified by ExtendedDataGuid. If ExtendedDataGuid is NULL, then a
- GUID of gEfiStatusCodeSpecificDatauid is used. The status code is reported with
- an instance specified by Instance and a caller ID specified by CallerId. If
- CallerId is NULL, then a caller ID of gEfiCallerIdGuid is used.
-
- ReportStatusCodeEx()must actively prevent recursion. If ReportStatusCodeEx()
- is called while processing another any other Report Status Code Library function,
- then ReportStatusCodeEx() must return EFI_DEVICE_ERROR immediately.
-
- If ExtendedData is NULL and ExtendedDataSize is not zero, then ASSERT().
- If ExtendedData is not NULL and ExtendedDataSize is zero, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param Instance Status code instance number.
- @param CallerId Pointer to a GUID that identifies the caller of this
- function. If this parameter is NULL, then a caller
- ID of gEfiCallerIdGuid is used.
- @param ExtendedDataGuid Pointer to the GUID for the extended data buffer.
- If this parameter is NULL, then a the status code
- standard header is filled in with
- gEfiStatusCodeSpecificDataGuid.
- @param ExtendedData Pointer to the extended data buffer. This is an
- optional parameter that may be NULL.
- @param ExtendedDataSize The size, in bytes, of the extended data buffer.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate
- the extended data section if it was specified.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeEx (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN CONST EFI_GUID *CallerId OPTIONAL,
- IN CONST EFI_GUID *ExtendedDataGuid OPTIONAL,
- IN CONST VOID *ExtendedData OPTIONAL,
- IN UINTN ExtendedDataSize
- )
-{
- return EFI_SUCCESS;
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportProgressCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED) != 0);
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_ERROR_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportErrorCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED) != 0);
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportDebugCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED) != 0);
-}
diff --git a/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.inf b/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.inf deleted file mode 100644 index 7eb01c435d..0000000000 --- a/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.inf +++ /dev/null @@ -1,58 +0,0 @@ -#/** @file
-# DXE report status code library
-#
-# Retrieve status code and report status code in DXE phase
-# Copyright (c) 2006 - 2007, Intel Corporation.
-#
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = BaseReportStatusCodeLib
- FILE_GUID = 1DE0B8C2-FFB6-4bdf-97F5-0FFB33979038
- MODULE_TYPE = BASE
- VERSION_STRING = 1.0
- LIBRARY_CLASS = ReportStatusCodeLib|BASE SEC USER_DEFINED
- EDK_RELEASE_VERSION = 0x00020000
- EFI_SPECIFICATION_VERSION = 0x00020000
-
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[Sources.common]
- BaseReportStatusCodeLib.c
-
-
-
-[Packages]
- MdePkg/MdePkg.dec
- IntelFrameworkPkg/IntelFrameworkPkg.dec
-
-
-[LibraryClasses]
- PcdLib
- BaseMemoryLib
- BaseLib
- DebugLib
-
-
-[Guids]
- gEfiStatusCodeSpecificDataGuid # ALWAYS_CONSUMED
- gEfiStatusCodeDataTypeDebugGuid # ALWAYS_CONSUMED
-
-
-[PcdsFixedAtBuild.common]
- PcdReportStatusCodePropertyMask|gEfiMdePkgTokenSpaceGuid
-
diff --git a/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.msa b/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.msa deleted file mode 100644 index ee0d635a02..0000000000 --- a/IntelFrameworkPkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.msa +++ /dev/null @@ -1,67 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <MsaHeader>
- <ModuleName>DxeReportStatusCodeLib</ModuleName>
- <ModuleType>BASE</ModuleType>
- <GuidValue>1DE0B8C2-FFB6-4bdf-97F5-0FFB33979038</GuidValue>
- <Version>1.0</Version>
- <Abstract>DXE report status code library</Abstract>
- <Description>Retrieve status code and report status code in DXE phase</Description>
- <Copyright>Copyright (c) 2006 - 2007, Intel Corporation.</Copyright>
- <License>All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>BaseReportStatusCodeLib</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="BASE">
- <Keyword>ReportStatusCodeLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseMemoryLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>PcdLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>BaseReportStatusCodeLib.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- </PackageDependencies>
- <Guids>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>
- </GuidCNames>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gEfiStatusCodeSpecificDataGuid</GuidCName>
- </GuidCNames>
- </Guids>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- </Externs>
- <PcdCoded>
- <PcdEntry PcdItemType="FIXED_AT_BUILD">
- <C_Name>PcdReportStatusCodePropertyMask</C_Name>
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>The bitmask of flags that specify the enable/disable of - Progress Code, Error Code and Debug Code.</HelpText>
- </PcdEntry>
- </PcdCoded>
-</ModuleSurfaceArea>
\ No newline at end of file diff --git a/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf b/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf deleted file mode 100644 index cf0d60c14f..0000000000 --- a/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf +++ /dev/null @@ -1,64 +0,0 @@ -#/** @file
-# DXE report status code library
-#
-# Retrieve status code and report status code in DXE phase
-# Copyright (c) 2006 - 2007, Intel Corporation.
-#
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = DxeReportStatusCodeLib
- FILE_GUID = 3ddc3b12-99ea-4364-b315-6310a2050be5
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
- LIBRARY_CLASS = ReportStatusCodeLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER
- EDK_RELEASE_VERSION = 0x00020000
- EFI_SPECIFICATION_VERSION = 0x00020000
-
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[Sources.common]
- ReportStatusCodeLib.c
-
-
-
-[Packages]
- MdePkg/MdePkg.dec
- IntelFrameworkPkg/IntelFrameworkPkg.dec
-
-
-[LibraryClasses]
- PcdLib
- BaseMemoryLib
- BaseLib
- UefiBootServicesTableLib
- DebugLib
- UefiRuntimeServicesTableLib
-
-
-[Guids]
- gEfiStatusCodeSpecificDataGuid # ALWAYS_CONSUMED
- gEfiStatusCodeDataTypeDebugGuid # ALWAYS_CONSUMED
-
-
-[Protocols]
- gEfiStatusCodeRuntimeProtocolGuid # PROTOCOL ALWAYS_CONSUMED
-
-
-[PcdsFixedAtBuild.common]
- PcdReportStatusCodePropertyMask|gEfiMdePkgTokenSpaceGuid
-
diff --git a/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.msa b/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.msa deleted file mode 100644 index ac8d57f519..0000000000 --- a/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.msa +++ /dev/null @@ -1,78 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <MsaHeader>
- <ModuleName>DxeReportStatusCodeLib</ModuleName>
- <ModuleType>DXE_DRIVER</ModuleType>
- <GuidValue>3ddc3b12-99ea-4364-b315-6310a2050be5</GuidValue>
- <Version>1.0</Version>
- <Abstract>DXE report status code library</Abstract>
- <Description>Retrieve status code and report status code in DXE phase</Description>
- <Copyright>Copyright (c) 2006 - 2007, Intel Corporation.</Copyright>
- <License>All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>DxeReportStatusCodeLib</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER">
- <Keyword>ReportStatusCodeLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiBootServicesTableLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseMemoryLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>PcdLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>UefiRuntimeServicesTableLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>ReportStatusCodeLib.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- </PackageDependencies>
- <Protocols>
- <Protocol Usage="ALWAYS_CONSUMED">
- <ProtocolCName>gEfiStatusCodeRuntimeProtocolGuid</ProtocolCName>
- </Protocol>
- </Protocols>
- <Guids>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>
- </GuidCNames>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gEfiStatusCodeSpecificDataGuid</GuidCName>
- </GuidCNames>
- </Guids>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- </Externs>
- <PcdCoded>
- <PcdEntry PcdItemType="FIXED_AT_BUILD">
- <C_Name>PcdReportStatusCodePropertyMask</C_Name>
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>The bitmask of flags that specify the enable/disable of - Progress Code, Error Code and Debug Code.</HelpText>
- </PcdEntry>
- </PcdCoded>
-</ModuleSurfaceArea>
\ No newline at end of file diff --git a/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/ReportStatusCodeLib.c b/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/ReportStatusCodeLib.c deleted file mode 100644 index be873694d6..0000000000 --- a/IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/ReportStatusCodeLib.c +++ /dev/null @@ -1,606 +0,0 @@ -/** @file
- Report Status Code Library for DXE Phase.
-
- Copyright (c) 2006 - 2007, Intel Corporation<BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include <FrameworkDxe.h>
-
-#include <Guid/StatusCodeDataTypeId.h>
-#include <Protocol/StatusCode.h>
-
-#include <Library/ReportStatusCodeLib.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/PcdLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-
-
-/**
- Internal worker function that reports a status code through the Status Code Protocol
-
- This function checks to see if a Status Code Protocol is present in the handle
- database. If a Status Code Protocol is not present, then EFI_UNSUPPORTED is
- returned. If a Status Code Protocol is present, then it is cached in gStatusCode,
- and the ReportStatusCode() service of the Status Code Protocol is called passing in
- Type, Value, Instance, CallerId, and Data. The result of this call is returned.
-
- @param Type Status code type.
- @param Value Status code value.
- @param Instance Status code instance number.
- @param CallerId Pointer to a GUID that identifies the caller of this
- function. This is an optional parameter that may be
- NULL.
- @param Data Pointer to the extended data buffer. This is an
- optional parameter that may be NULL.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to report the status code.
- @retval EFI_UNSUPPORTED Status Code Protocol is not available.
-
-**/
-STATIC
-EFI_STATUS
-InternalReportStatusCode (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN CONST EFI_GUID *CallerId OPTIONAL,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- )
-{
- EFI_STATUS Status;
- EFI_STATUS_CODE_PROTOCOL *StatusCode;
- STATIC EFI_REPORT_STATUS_CODE ReportStatusCode = NULL;
-
- //
- // If gStatusCode is NULL, then see if a Status Code Protocol instance is present
- // in the handle database.
- //
- if (ReportStatusCode == NULL) {
- if (gBS == NULL) {
- return EFI_UNSUPPORTED;
- }
- Status = gBS->LocateProtocol (&gEfiStatusCodeRuntimeProtocolGuid, NULL, (VOID**)&StatusCode);
- if (!EFI_ERROR (Status) && StatusCode != NULL) {
- ReportStatusCode = StatusCode->ReportStatusCode;
- } else if (gRT->Hdr.Revision < 0x20000) {
- ReportStatusCode = ((FRAMEWORK_EFI_RUNTIME_SERVICES*)gRT)->ReportStatusCode;
- } else {
- return EFI_UNSUPPORTED;
- }
- }
-
- //
- // A Status Code Protocol is present in the handle database, so pass in all the
- // parameters to the ReportStatusCode() service of the Status Code Protocol
- //
- return (*ReportStatusCode) (Type, Value, Instance, (EFI_GUID *)CallerId, Data);
-}
-
-
-/**
- Computes and returns the size, in bytes, of a device path.
-
- @param DevicePath A pointer to a device path.
-
- @return The size, in bytes, of DevicePath.
-
-**/
-STATIC
-UINTN
-InternalReportStatusCodeDevicePathSize (
- IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- CONST EFI_DEVICE_PATH_PROTOCOL *Start;
-
- //
- // Search for the end of the device path structure
- //
- Start = DevicePath;
- while (!EfiIsDevicePathEnd (DevicePath)) {
- DevicePath = EfiNextDevicePathNode (DevicePath);
- }
-
- //
- // Subtract the start node from the end node and add in the size of the end node
- //
- return ((UINTN) DevicePath - (UINTN) Start) + DevicePathNodeLength (DevicePath);
-}
-
-
-/**
- Converts a status code to an 8-bit POST code value.
-
- Converts the status code specified by CodeType and Value to an 8-bit POST code
- and returns the 8-bit POST code in PostCode. If CodeType is an
- EFI_PROGRESS_CODE or CodeType is an EFI_ERROR_CODE, then bits 0..4 of PostCode
- are set to bits 16..20 of Value, and bits 5..7 of PostCode are set to bits
- 24..26 of Value., and TRUE is returned. Otherwise, FALSE is returned.
-
- If PostCode is NULL, then ASSERT().
-
- @param CodeType The type of status code being converted.
- @param Value The status code value being converted.
- @param PostCode A pointer to the 8-bit POST code value to return.
-
- @retval TRUE The status code specified by CodeType and Value was converted
- to an 8-bit POST code and returned in PostCode.
- @retval FALSE The status code specified by CodeType and Value could not be
- converted to an 8-bit POST code value.
-
-**/
-BOOLEAN
-EFIAPI
-CodeTypeToPostCode (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- OUT UINT8 *PostCode
- )
-{
- //
- // If PostCode is NULL, then ASSERT()
- //
- ASSERT (PostCode != NULL);
-
- //
- // Convert Value to an 8 bit post code
- //
- if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) ||
- ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) ) {
- *PostCode = (UINT8) ((((Value & EFI_STATUS_CODE_CLASS_MASK) >> 24) << 5) |
- (((Value & EFI_STATUS_CODE_SUBCLASS_MASK) >> 16) & 0x1f));
- return TRUE;
- }
- return FALSE;
-}
-
-
-/**
- Extracts ASSERT() information from a status code structure.
-
- Converts the status code specified by CodeType, Value, and Data to the ASSERT()
- arguments specified by Filename, Description, and LineNumber. If CodeType is
- an EFI_ERROR_CODE, and CodeType has a severity of EFI_ERROR_UNRECOVERED, and
- Value has an operation mask of EFI_SW_EC_ILLEGAL_SOFTWARE_STATE, extract
- Filename, Description, and LineNumber from the optional data area of the
- status code buffer specified by Data. The optional data area of Data contains
- a Null-terminated ASCII string for the FileName, followed by a Null-terminated
- ASCII string for the Description, followed by a 32-bit LineNumber. If the
- ASSERT() information could be extracted from Data, then return TRUE.
- Otherwise, FALSE is returned.
-
- If Data is NULL, then ASSERT().
- If Filename is NULL, then ASSERT().
- If Description is NULL, then ASSERT().
- If LineNumber is NULL, then ASSERT().
-
- @param CodeType The type of status code being converted.
- @param Value The status code value being converted.
- @param Data Pointer to status code data buffer.
- @param Filename Pointer to the source file name that generated the ASSERT().
- @param Description Pointer to the description of the ASSERT().
- @param LineNumber Pointer to source line number that generated the ASSERT().
-
- @retval TRUE The status code specified by CodeType, Value, and Data was
- converted ASSERT() arguments specified by Filename, Description,
- and LineNumber.
- @retval FALSE The status code specified by CodeType, Value, and Data could
- not be converted to ASSERT() arguments.
-
-**/
-BOOLEAN
-EFIAPI
-ReportStatusCodeExtractAssertInfo (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST EFI_STATUS_CODE_DATA *Data,
- OUT CHAR8 **Filename,
- OUT CHAR8 **Description,
- OUT UINT32 *LineNumber
- )
-{
- EFI_DEBUG_ASSERT_DATA *AssertData;
-
- ASSERT (Data != NULL);
- ASSERT (Filename != NULL);
- ASSERT (Description != NULL);
- ASSERT (LineNumber != NULL);
-
- if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) &&
- ((CodeType & EFI_STATUS_CODE_SEVERITY_MASK) == EFI_ERROR_UNRECOVERED) &&
- ((Value & EFI_STATUS_CODE_OPERATION_MASK) == EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)) {
- AssertData = (EFI_DEBUG_ASSERT_DATA *)(Data + 1);
- *Filename = (CHAR8 *)(AssertData + 1);
- *Description = *Filename + AsciiStrLen (*Filename) + 1;
- *LineNumber = AssertData->LineNumber;
- return TRUE;
- }
- return FALSE;
-}
-
-
-/**
- Extracts DEBUG() information from a status code structure.
-
- Converts the status code specified by Data to the DEBUG() arguments specified
- by ErrorLevel, Marker, and Format. If type GUID in Data is
- EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID, then extract ErrorLevel, Marker, and
- Format from the optional data area of the status code buffer specified by Data.
- The optional data area of Data contains a 32-bit ErrorLevel followed by Marker
- which is 12 UINTN parameters, followed by a Null-terminated ASCII string for
- the Format. If the DEBUG() information could be extracted from Data, then
- return TRUE. Otherwise, FALSE is returned.
-
- If Data is NULL, then ASSERT().
- If ErrorLevel is NULL, then ASSERT().
- If Marker is NULL, then ASSERT().
- If Format is NULL, then ASSERT().
-
- @param Data Pointer to status code data buffer.
- @param ErrorLevel Pointer to error level mask for a debug message.
- @param Marker Pointer to the variable argument list associated with Format.
- @param Format Pointer to a Null-terminated ASCII format string of a
- debug message.
-
- @retval TRUE The status code specified by Data was converted DEBUG() arguments
- specified by ErrorLevel, Marker, and Format.
- @retval FALSE The status code specified by Data could not be converted to
- DEBUG() arguments.
-
-**/
-BOOLEAN
-EFIAPI
-ReportStatusCodeExtractDebugInfo (
- IN CONST EFI_STATUS_CODE_DATA *Data,
- OUT UINT32 *ErrorLevel,
- OUT VA_LIST *Marker,
- OUT CHAR8 **Format
- )
-{
- EFI_DEBUG_INFO *DebugInfo;
-
- ASSERT (Data != NULL);
- ASSERT (ErrorLevel != NULL);
- ASSERT (Marker != NULL);
- ASSERT (Format != NULL);
-
- //
- // If the GUID type is not EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID then return FALSE
- //
- if (!CompareGuid (&Data->Type, &gEfiStatusCodeDataTypeDebugGuid)) {
- return FALSE;
- }
-
- //
- // Retrieve the debug information from the status code record
- //
- DebugInfo = (EFI_DEBUG_INFO *)(Data + 1);
-
- *ErrorLevel = DebugInfo->ErrorLevel;
-
- //
- // The first 12 * UINTN bytes of the string are really an
- // argument stack to support varargs on the Format string.
- //
- *Marker = (VA_LIST) (DebugInfo + 1);
- *Format = (CHAR8 *)(((UINT64 *)*Marker) + 12);
-
- return TRUE;
-}
-
-
-/**
- Reports a status code.
-
- Reports the status code specified by the parameters Type and Value. Status
- code also require an instance, caller ID, and extended data. This function
- passed in a zero instance, NULL extended data, and a caller ID of
- gEfiCallerIdGuid, which is the GUID for the module.
-
- ReportStatusCode()must actively prevent recusrsion. If ReportStatusCode()
- is called while processing another any other Report Status Code Library function,
- then ReportStatusCode() must return immediately.
-
- @param Type Status code type.
- @param Value Status code value.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_DEVICE_ERROR There status code could not be reported due to a
- device error.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCode (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value
- )
-{
- return InternalReportStatusCode (Type, Value, 0, &gEfiCallerIdGuid, NULL);
-}
-
-
-/**
- Reports a status code with a Device Path Protocol as the extended data.
-
- Allocates and fills in the extended data section of a status code with the
- Device Path Protocol specified by DevicePath. This function is responsible
- for allocating a buffer large enough for the standard header and the device
- path. The standard header is filled in with a GUID of
- gEfiStatusCodeSpecificDataGuid. The status code is reported with a zero
- instance and a caller ID of gEfiCallerIdGuid.
-
- ReportStatusCodeWithDevicePath()must actively prevent recursion. If
- ReportStatusCodeWithDevicePath() is called while processing another any other
- Report Status Code Library function, then ReportStatusCodeWithDevicePath()
- must return EFI_DEVICE_ERROR immediately.
-
- If DevicePath is NULL, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param DevicePath Pointer to the Device Path Protocol to be reported.
-
- @retval EFI_SUCCESS The status code was reported with the extended
- data specified by DevicePath.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the
- extended data section.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeWithDevicePath (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- ASSERT (DevicePath != NULL);
- return ReportStatusCodeWithExtendedData (
- Type,
- Value,
- (VOID *)DevicePath,
- InternalReportStatusCodeDevicePathSize (DevicePath)
- );
-}
-
-
-/**
- Reports a status code with an extended data buffer.
-
- Allocates and fills in the extended data section of a status code with the
- extended data specified by ExtendedData and ExtendedDataSize. ExtendedData
- is assumed to be one of the data structures specified in Related Definitions.
- These data structure do not have the standard header, so this function is
- responsible for allocating a buffer large enough for the standard header and
- the extended data passed into this function. The standard header is filled
- in with a GUID of gEfiStatusCodeSpecificDataGuid. The status code is reported
- with a zero instance and a caller ID of gEfiCallerIdGuid.
-
- ReportStatusCodeWithExtendedData()must actively prevent recursion. If
- ReportStatusCodeWithExtendedData() is called while processing another any other
- Report Status Code Library function, then ReportStatusCodeWithExtendedData()
- must return EFI_DEVICE_ERROR immediately.
-
- If ExtendedData is NULL, then ASSERT().
- If ExtendedDataSize is 0, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param ExtendedData Pointer to the extended data buffer to be reported.
- @param ExtendedDataSize The size, in bytes, of the extended data buffer to
- be reported.
-
- @retval EFI_SUCCESS The status code was reported with the extended
- data specified by ExtendedData and ExtendedDataSize.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the
- extended data section.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeWithExtendedData (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST VOID *ExtendedData,
- IN UINTN ExtendedDataSize
- )
-{
- ASSERT (ExtendedData != NULL);
- ASSERT (ExtendedDataSize != 0);
- return ReportStatusCodeEx (
- Type,
- Value,
- 0,
- NULL,
- NULL,
- ExtendedData,
- ExtendedDataSize
- );
-}
-
-
-/**
- Reports a status code with full parameters.
-
- The function reports a status code. If ExtendedData is NULL and ExtendedDataSize
- is 0, then an extended data buffer is not reported. If ExtendedData is not
- NULL and ExtendedDataSize is not 0, then an extended data buffer is allocated.
- ExtendedData is assumed not have the standard status code header, so this function
- is responsible for allocating a buffer large enough for the standard header and
- the extended data passed into this function. The standard header is filled in
- with a GUID specified by ExtendedDataGuid. If ExtendedDataGuid is NULL, then a
- GUID of gEfiStatusCodeSpecificDatauid is used. The status code is reported with
- an instance specified by Instance and a caller ID specified by CallerId. If
- CallerId is NULL, then a caller ID of gEfiCallerIdGuid is used.
-
- ReportStatusCodeEx()must actively prevent recursion. If ReportStatusCodeEx()
- is called while processing another any other Report Status Code Library function,
- then ReportStatusCodeEx() must return EFI_DEVICE_ERROR immediately.
-
- If ExtendedData is NULL and ExtendedDataSize is not zero, then ASSERT().
- If ExtendedData is not NULL and ExtendedDataSize is zero, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param Instance Status code instance number.
- @param CallerId Pointer to a GUID that identifies the caller of this
- function. If this parameter is NULL, then a caller
- ID of gEfiCallerIdGuid is used.
- @param ExtendedDataGuid Pointer to the GUID for the extended data buffer.
- If this parameter is NULL, then a the status code
- standard header is filled in with
- gEfiStatusCodeSpecificDataGuid.
- @param ExtendedData Pointer to the extended data buffer. This is an
- optional parameter that may be NULL.
- @param ExtendedDataSize The size, in bytes, of the extended data buffer.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate
- the extended data section if it was specified.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeEx (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN CONST EFI_GUID *CallerId OPTIONAL,
- IN CONST EFI_GUID *ExtendedDataGuid OPTIONAL,
- IN CONST VOID *ExtendedData OPTIONAL,
- IN UINTN ExtendedDataSize
- )
-{
- EFI_STATUS Status;
- EFI_STATUS_CODE_DATA *StatusCodeData;
-
- ASSERT (!((ExtendedData == NULL) && (ExtendedDataSize != 0)));
- ASSERT (!((ExtendedData != NULL) && (ExtendedDataSize == 0)));
-
- if (gBS == NULL) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Allocate space for the Status Code Header and its buffer
- //
- StatusCodeData = NULL;
- gBS->AllocatePool (EfiBootServicesData, sizeof (EFI_STATUS_CODE_DATA) + ExtendedDataSize, (VOID **)&StatusCodeData);
- if (StatusCodeData == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // Fill in the extended data header
- //
- StatusCodeData->HeaderSize = sizeof (EFI_STATUS_CODE_DATA);
- StatusCodeData->Size = (UINT16)ExtendedDataSize;
- if (ExtendedDataGuid == NULL) {
- ExtendedDataGuid = &gEfiStatusCodeSpecificDataGuid;
- }
- CopyGuid (&StatusCodeData->Type, ExtendedDataGuid);
-
- //
- // Fill in the extended data buffer
- //
- CopyMem (StatusCodeData + 1, ExtendedData, ExtendedDataSize);
-
- //
- // Report the status code
- //
- if (CallerId == NULL) {
- CallerId = &gEfiCallerIdGuid;
- }
- Status = InternalReportStatusCode (Type, Value, Instance, CallerId, StatusCodeData);
-
- //
- // Free the allocated buffer
- //
- gBS->FreePool (StatusCodeData);
-
- return Status;
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportProgressCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED) != 0);
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_ERROR_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportErrorCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED) != 0);
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportDebugCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED) != 0);
-}
diff --git a/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/DebugLib.c b/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/DebugLib.c deleted file mode 100644 index 4bacdd1774..0000000000 --- a/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/DebugLib.c +++ /dev/null @@ -1,298 +0,0 @@ -/** @file
- Debug Library that fowards all messages to ReportStatusCode()
-
- Copyright (c) 2006, Intel Corporation<BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-
-#include <FrameworkPei.h>
-
-#include <Guid/StatusCodeDataTypeId.h>
-
-#include <Library/DebugLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/ReportStatusCodeLib.h>
-#include <Library/PcdLib.h>
-
-/**
-
- Prints a debug message to the debug output device if the specified error level is enabled.
-
- If any bit in ErrorLevel is also set in PcdDebugPrintErrorLevel, then print
- the message specified by Format and the associated variable argument list to
- the debug output device.
-
- If Format is NULL, then ASSERT().
-
- @param ErrorLevel The error level of the debug message.
- @param Format Format string for the debug message to print.
-
-**/
-VOID
-EFIAPI
-DebugPrint (
- IN UINTN ErrorLevel,
- IN CONST CHAR8 *Format,
- ...
- )
-{
- UINT64 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof (UINT64)];
- EFI_DEBUG_INFO *DebugInfo;
- UINTN TotalSize;
- UINTN Index;
- VA_LIST Marker;
- UINT64 *ArgumentPointer;
-
- //
- // If Format is NULL, then ASSERT().
- //
- ASSERT (Format != NULL);
-
- //
- // Check driver Debug Level value and global debug level
- //
- if ((ErrorLevel & PcdGet32(PcdDebugPrintErrorLevel)) == 0) {
- return;
- }
-
- TotalSize = sizeof (EFI_DEBUG_INFO) + 12 * sizeof (UINT64) + AsciiStrLen (Format) + 1;
- if (TotalSize > EFI_STATUS_CODE_DATA_MAX_SIZE) {
- return;
- }
-
- //
- // Then EFI_DEBUG_INFO
- //
- DebugInfo = (EFI_DEBUG_INFO *)Buffer;
- DebugInfo->ErrorLevel = (UINT32)ErrorLevel;
-
- //
- // 256 byte mini Var Arg stack. That is followed by the format string.
- //
- VA_START (Marker, Format);
- for (Index = 0, ArgumentPointer = (UINT64 *)(DebugInfo + 1); Index < 12; Index++, ArgumentPointer++) {
- WriteUnaligned64(ArgumentPointer, VA_ARG (Marker, UINT64));
- }
- VA_END (Marker);
- AsciiStrCpy ((CHAR8 *)ArgumentPointer, Format);
-
- REPORT_STATUS_CODE_EX (
- EFI_DEBUG_CODE,
- (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_DC_UNSPECIFIED),
- 0,
- NULL,
- &gEfiStatusCodeDataTypeDebugGuid,
- DebugInfo,
- TotalSize
- );
-}
-
-
-/**
-
- Prints an assert message containing a filename, line number, and description.
- This may be followed by a breakpoint or a dead loop.
-
- Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
- to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
- PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
- DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
- CpuDeadLoop() is called. If neither of these bits are set, then this function
- returns immediately after the message is printed to the debug output device.
- DebugAssert() must actively prevent recusrsion. If DebugAssert() is called while
- processing another DebugAssert(), then DebugAssert() must return immediately.
-
- If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.
-
- If Description is NULL, then a <Description> string of "(NULL) Description" is printed.
-
- @param FileName Pointer to the name of the source file that generated the assert condition.
- @param LineNumber The line number in the source file that generated the assert condition
- @param Description Pointer to the description of the assert condition.
-
-**/
-VOID
-EFIAPI
-DebugAssert (
- IN CONST CHAR8 *FileName,
- IN UINTN LineNumber,
- IN CONST CHAR8 *Description
- )
-{
- UINT64 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof(UINT64)];
- EFI_DEBUG_ASSERT_DATA *AssertData;
- UINTN TotalSize;
- CHAR8 *Temp;
- UINTN FileNameLength;
- UINTN DescriptionLength;
-
- //
- // Make sure it will all fit in the passed in buffer
- //
- FileNameLength = AsciiStrLen (FileName);
- DescriptionLength = AsciiStrLen (Description);
- TotalSize = sizeof (EFI_DEBUG_ASSERT_DATA) + FileNameLength + 1 + DescriptionLength + 1;
- if (TotalSize <= EFI_STATUS_CODE_DATA_MAX_SIZE) {
- //
- // Fill in EFI_DEBUG_ASSERT_DATA
- //
- AssertData = (EFI_DEBUG_ASSERT_DATA *)Buffer;
- AssertData->LineNumber = (UINT32)LineNumber;
-
- //
- // Copy Ascii FileName including NULL.
- //
- Temp = AsciiStrCpy ((CHAR8 *)(AssertData + 1), FileName);
-
- //
- // Copy Ascii Description
- //
- AsciiStrCpy (Temp + AsciiStrLen (FileName) + 1, Description);
-
- REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
- (EFI_ERROR_CODE | EFI_ERROR_UNRECOVERED),
- (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_EC_ILLEGAL_SOFTWARE_STATE),
- AssertData,
- TotalSize
- );
- }
-
- //
- // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
- //
- if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {
- CpuBreakpoint ();
- } else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {
- CpuDeadLoop ();
- }
-}
-
-
-/**
-
- Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.
-
- This function fills Length bytes of Buffer with the value specified by
- PcdDebugClearMemoryValue, and returns Buffer.
-
- If Buffer is NULL, then ASSERT().
-
- If Length is greater than (MAX_ADDRESS ? Buffer + 1), then ASSERT().
-
- @param Buffer Pointer to the target buffer to fill with PcdDebugClearMemoryValue.
- @param Length Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.
-
- @return Buffer
-
-**/
-VOID *
-EFIAPI
-DebugClearMemory (
- OUT VOID *Buffer,
- IN UINTN Length
- )
-{
- //
- // If Buffer is NULL, then ASSERT().
- //
- ASSERT (Buffer != NULL);
-
- //
- // SetMem() checks for the the ASSERT() condition on Length and returns Buffer
- //
- return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));
-}
-
-
-/**
-
- Returns TRUE if ASSERT() macros are enabled.
-
- This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-DebugAssertEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);
-}
-
-
-/**
-
- Returns TRUE if DEBUG()macros are enabled.
-
- This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-DebugPrintEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);
-}
-
-
-/**
-
- Returns TRUE if DEBUG_CODE()macros are enabled.
-
- This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-DebugCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);
-}
-
-
-/**
-
- Returns TRUE if DEBUG_CLEAR_MEMORY()macro is enabled.
-
- This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of
- PcdDebugProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
- @retval FALSE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-DebugClearMemoryEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);
-}
diff --git a/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf b/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf deleted file mode 100644 index 138de9860e..0000000000 --- a/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf +++ /dev/null @@ -1,56 +0,0 @@ -#/** @file
-# Debug Library based on report status code library
-#
-# Debug Library for PEIMs and DXE drivers that send debug messages to ReportStatusCode
-# Copyright (c) 2006, Intel Corporation.
-#
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = PeiDxeDebugLibReportStatusCode
- FILE_GUID = bda39d3a-451b-4350-8266-81ab10fa0523
- MODULE_TYPE = PEIM
- VERSION_STRING = 1.0
- LIBRARY_CLASS = DebugLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER PEIM PEI_CORE UEFI_APPLICATION UEFI_DRIVER
- EDK_RELEASE_VERSION = 0x00020000
- EFI_SPECIFICATION_VERSION = 0x00020000
-
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[Sources.common]
- DebugLib.c
-
-
-[Packages]
- MdePkg/MdePkg.dec
- IntelFrameworkPkg/IntelFrameworkPkg.dec
-
-[LibraryClasses]
- PcdLib
- ReportStatusCodeLib
- BaseMemoryLib
- BaseLib
-
-
-[PcdsFixedAtBuild.common]
- PcdDebugClearMemoryValue|gEfiMdePkgTokenSpaceGuid
- PcdDebugPropertyMask|gEfiMdePkgTokenSpaceGuid
-
-
-[PcdsDynamic.common]
- PcdDebugPrintErrorLevel|gEfiMdePkgTokenSpaceGuid
-
diff --git a/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.msa b/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.msa deleted file mode 100644 index cd0052e0ef..0000000000 --- a/IntelFrameworkPkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.msa +++ /dev/null @@ -1,77 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <MsaHeader>
- <ModuleName>PeiDxeDebugLibReportStatusCode</ModuleName>
- <ModuleType>PEIM</ModuleType>
- <GuidValue>bda39d3a-451b-4350-8266-81ab10fa0523</GuidValue>
- <Version>1.0</Version>
- <Abstract>Debug Library based on report status code library</Abstract>
- <Description>Debug Library for PEIMs and DXE drivers that send debug messages to ReportStatusCode</Description>
- <Copyright>Copyright (c) 2006, Intel Corporation.</Copyright>
- <License>All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>PeiDxeDebugLibReportStatusCode</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER PEIM PEI_CORE UEFI_APPLICATION UEFI_DRIVER">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseMemoryLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>ReportStatusCodeLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>PcdLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>DebugLib.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- </PackageDependencies>
- <Guids>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>
- </GuidCNames>
- </Guids>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- </Externs>
- <PcdCoded>
- <PcdEntry PcdItemType="FIXED_AT_BUILD">
- <C_Name>PcdDebugPropertyMask</C_Name>
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>The bitmask of flags that specify the enable/disable of Debug - Assert, Debug Print, Debug Code, Clear Memory, Assert - Breakpoint and Assert Deadloop.</HelpText>
- </PcdEntry>
- <PcdEntry PcdItemType="FIXED_AT_BUILD">
- <C_Name>PcdDebugClearMemoryValue</C_Name>
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>The value used by DebugClearMemory () to fill a certain range - of memory.</HelpText>
- </PcdEntry>
- <PcdEntry PcdItemType="DYNAMIC">
- <C_Name>PcdDebugPrintErrorLevel</C_Name>
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>The bitmask of flags that specify the kind of debug message - output when Debug Print is enabled.</HelpText>
- </PcdEntry>
- </PcdCoded>
-</ModuleSurfaceArea>
\ No newline at end of file diff --git a/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf b/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf deleted file mode 100644 index 6bcb2dc8e3..0000000000 --- a/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf +++ /dev/null @@ -1,58 +0,0 @@ -#/** @file
-# Report status code library
-#
-# ReportStatusCodeLib for PEIM which depends upon Pei Services table
-# Copyright (c) 2006 - 2007, Intel Corporation.
-#
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = PeiReportStatusCodeLib
- FILE_GUID = 8c690838-7a22-45c4-aa58-a33e3e515cd4
- MODULE_TYPE = PEIM
- VERSION_STRING = 1.0
- LIBRARY_CLASS = ReportStatusCodeLib|PEIM PEI_CORE
- EDK_RELEASE_VERSION = 0x00020000
- EFI_SPECIFICATION_VERSION = 0x00020000
-
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[Sources.common]
- ReportStatusCodeLib.c
-
-
-[Packages]
- MdePkg/MdePkg.dec
- IntelFrameworkPkg/IntelFrameworkPkg.dec
-
-
-[LibraryClasses]
- PcdLib
- PeiServicesTablePointerLib
- BaseMemoryLib
- BaseLib
- DebugLib
-
-
-[Guids]
- gEfiStatusCodeSpecificDataGuid # ALWAYS_CONSUMED
- gEfiStatusCodeDataTypeDebugGuid # ALWAYS_CONSUMED
-
-
-[PcdsFixedAtBuild.common]
- PcdReportStatusCodePropertyMask|gEfiMdePkgTokenSpaceGuid
-
diff --git a/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.msa b/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.msa deleted file mode 100644 index c58ecb363c..0000000000 --- a/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.msa +++ /dev/null @@ -1,70 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <MsaHeader>
- <ModuleName>PeiReportStatusCodeLib</ModuleName>
- <ModuleType>PEIM</ModuleType>
- <GuidValue>8c690838-7a22-45c4-aa58-a33e3e515cd4</GuidValue>
- <Version>1.0</Version>
- <Abstract>Report status code library</Abstract>
- <Description>ReportStatusCodeLib for PEIM which depends upon Pei Services table</Description>
- <Copyright>Copyright (c) 2006 - 2007, Intel Corporation.</Copyright>
- <License>All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
- <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
- </MsaHeader>
- <ModuleDefinitions>
- <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
- <BinaryModule>false</BinaryModule>
- <OutputFileBasename>PeiReportStatusCodeLib</OutputFileBasename>
- </ModuleDefinitions>
- <LibraryClassDefinitions>
- <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="PEIM PEI_CORE">
- <Keyword>ReportStatusCodeLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>DebugLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>BaseMemoryLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>PeiServicesTablePointerLib</Keyword>
- </LibraryClass>
- <LibraryClass Usage="ALWAYS_CONSUMED">
- <Keyword>PcdLib</Keyword>
- </LibraryClass>
- </LibraryClassDefinitions>
- <SourceFiles>
- <Filename>ReportStatusCodeLib.c</Filename>
- </SourceFiles>
- <PackageDependencies>
- <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
- </PackageDependencies>
- <Guids>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>
- </GuidCNames>
- <GuidCNames Usage="ALWAYS_CONSUMED">
- <GuidCName>gEfiStatusCodeSpecificDataGuid</GuidCName>
- </GuidCNames>
- </Guids>
- <Externs>
- <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
- <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
- </Externs>
- <PcdCoded>
- <PcdEntry PcdItemType="FIXED_AT_BUILD">
- <C_Name>PcdReportStatusCodePropertyMask</C_Name>
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>
- <HelpText>The bitmask of flags that specify the enable/disable of - Progress Code, Error Code and Debug Code.</HelpText>
- </PcdEntry>
- </PcdCoded>
-</ModuleSurfaceArea>
\ No newline at end of file diff --git a/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/ReportStatusCodeLib.c b/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/ReportStatusCodeLib.c deleted file mode 100644 index 5b6f69eced..0000000000 --- a/IntelFrameworkPkg/Library/PeiReportStatusCodeLib/ReportStatusCodeLib.c +++ /dev/null @@ -1,529 +0,0 @@ -/** @file
- Report Status Code Library for DXE Phase.
-
- Copyright (c) 2006, Intel Corporation<BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include <FrameworkPei.h>
-
-#include <Guid/StatusCodeDataTypeId.h>
-
-#include <Library/ReportStatusCodeLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/PeiServicesTablePointerLib.h>
-#include <Library/PcdLib.h>
-
-//
-// Define the maximum extended data size that is supported in the PEI phase
-//
-#define MAX_EXTENDED_DATA_SIZE 0x200
-
-/**
- Internal worker function that reports a status code through the Status Code Protocol
-
- This function checks to see if a Status Code Protocol is present in the handle
- database. If a Status Code Protocol is not present, then EFI_UNSUPPORTED is
- returned. If a Status Code Protocol is present, then it is cached in gStatusCode,
- and the ReportStatusCode() service of the Status Code Protocol is called passing in
- Type, Value, Instance, CallerId, and Data. The result of this call is returned.
-
- @param Type Status code type.
- @param Value Status code value.
- @param Instance Status code instance number.
- @param CallerId Pointer to a GUID that identifies the caller of this
- function. This is an optional parameter that may be
- NULL.
- @param Data Pointer to the extended data buffer. This is an
- optional parameter that may be NULL.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to report the status code.
- @retval EFI_UNSUPPORTED Status Code Protocol is not available.
-
-**/
-STATIC
-EFI_STATUS
-InternalReportStatusCode (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN CONST EFI_GUID *CallerId OPTIONAL,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- )
-{
- EFI_PEI_SERVICES **PeiServices;
-
- PeiServices = GetPeiServicesTablePointer ();
- return (*PeiServices)->ReportStatusCode (
- PeiServices,
- Type,
- Value,
- Instance,
- (EFI_GUID *)CallerId,
- Data
- );
-}
-
-
-/**
- Converts a status code to an 8-bit POST code value.
-
- Converts the status code specified by CodeType and Value to an 8-bit POST code
- and returns the 8-bit POST code in PostCode. If CodeType is an
- EFI_PROGRESS_CODE or CodeType is an EFI_ERROR_CODE, then bits 0..4 of PostCode
- are set to bits 16..20 of Value, and bits 5..7 of PostCode are set to bits
- 24..26 of Value., and TRUE is returned. Otherwise, FALSE is returned.
-
- If PostCode is NULL, then ASSERT().
-
- @param CodeType The type of status code being converted.
- @param Value The status code value being converted.
- @param PostCode A pointer to the 8-bit POST code value to return.
-
- @retval TRUE The status code specified by CodeType and Value was converted
- to an 8-bit POST code and returned in PostCode.
- @retval FALSE The status code specified by CodeType and Value could not be
- converted to an 8-bit POST code value.
-
-**/
-BOOLEAN
-EFIAPI
-CodeTypeToPostCode (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- OUT UINT8 *PostCode
- )
-{
- //
- // If PostCode is NULL, then ASSERT()
- //
- ASSERT (PostCode != NULL);
-
- //
- // Convert Value to an 8 bit post code
- //
- if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) ||
- ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) ) {
- *PostCode = (UINT8) ((((Value & EFI_STATUS_CODE_CLASS_MASK) >> 24) << 5) |
- (((Value & EFI_STATUS_CODE_SUBCLASS_MASK) >> 16) & 0x1f));
- return TRUE;
- }
- return FALSE;
-}
-
-
-/**
- Extracts ASSERT() information from a status code structure.
-
- Converts the status code specified by CodeType, Value, and Data to the ASSERT()
- arguments specified by Filename, Description, and LineNumber. If CodeType is
- an EFI_ERROR_CODE, and CodeType has a severity of EFI_ERROR_UNRECOVERED, and
- Value has an operation mask of EFI_SW_EC_ILLEGAL_SOFTWARE_STATE, extract
- Filename, Description, and LineNumber from the optional data area of the
- status code buffer specified by Data. The optional data area of Data contains
- a Null-terminated ASCII string for the FileName, followed by a Null-terminated
- ASCII string for the Description, followed by a 32-bit LineNumber. If the
- ASSERT() information could be extracted from Data, then return TRUE.
- Otherwise, FALSE is returned.
-
- If Data is NULL, then ASSERT().
- If Filename is NULL, then ASSERT().
- If Description is NULL, then ASSERT().
- If LineNumber is NULL, then ASSERT().
-
- @param CodeType The type of status code being converted.
- @param Value The status code value being converted.
- @param Data Pointer to status code data buffer.
- @param Filename Pointer to the source file name that generated the ASSERT().
- @param Description Pointer to the description of the ASSERT().
- @param LineNumber Pointer to source line number that generated the ASSERT().
-
- @retval TRUE The status code specified by CodeType, Value, and Data was
- converted ASSERT() arguments specified by Filename, Description,
- and LineNumber.
- @retval FALSE The status code specified by CodeType, Value, and Data could
- not be converted to ASSERT() arguments.
-
-**/
-BOOLEAN
-EFIAPI
-ReportStatusCodeExtractAssertInfo (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST EFI_STATUS_CODE_DATA *Data,
- OUT CHAR8 **Filename,
- OUT CHAR8 **Description,
- OUT UINT32 *LineNumber
- )
-{
- EFI_DEBUG_ASSERT_DATA *AssertData;
-
- ASSERT (Data != NULL);
- ASSERT (Filename != NULL);
- ASSERT (Description != NULL);
- ASSERT (LineNumber != NULL);
-
- if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) &&
- ((CodeType & EFI_STATUS_CODE_SEVERITY_MASK) == EFI_ERROR_UNRECOVERED) &&
- ((Value & EFI_STATUS_CODE_OPERATION_MASK) == EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)) {
- AssertData = (EFI_DEBUG_ASSERT_DATA *)(Data + 1);
- *Filename = (CHAR8 *)(AssertData + 1);
- *Description = *Filename + AsciiStrLen (*Filename) + 1;
- *LineNumber = AssertData->LineNumber;
- return TRUE;
- }
- return FALSE;
-}
-
-
-/**
- Extracts DEBUG() information from a status code structure.
-
- Converts the status code specified by Data to the DEBUG() arguments specified
- by ErrorLevel, Marker, and Format. If type GUID in Data is
- EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID, then extract ErrorLevel, Marker, and
- Format from the optional data area of the status code buffer specified by Data.
- The optional data area of Data contains a 32-bit ErrorLevel followed by Marker
- which is 12 UINTN parameters, followed by a Null-terminated ASCII string for
- the Format. If the DEBUG() information could be extracted from Data, then
- return TRUE. Otherwise, FALSE is returned.
-
- If Data is NULL, then ASSERT().
- If ErrorLevel is NULL, then ASSERT().
- If Marker is NULL, then ASSERT().
- If Format is NULL, then ASSERT().
-
- @param Data Pointer to status code data buffer.
- @param ErrorLevel Pointer to error level mask for a debug message.
- @param Marker Pointer to the variable argument list associated with Format.
- @param Format Pointer to a Null-terminated ASCII format string of a
- debug message.
-
- @retval TRUE The status code specified by Data was converted DEBUG() arguments
- specified by ErrorLevel, Marker, and Format.
- @retval FALSE The status code specified by Data could not be converted to
- DEBUG() arguments.
-
-**/
-BOOLEAN
-EFIAPI
-ReportStatusCodeExtractDebugInfo (
- IN CONST EFI_STATUS_CODE_DATA *Data,
- OUT UINT32 *ErrorLevel,
- OUT VA_LIST *Marker,
- OUT CHAR8 **Format
- )
-{
- EFI_DEBUG_INFO *DebugInfo;
-
- ASSERT (Data != NULL);
- ASSERT (ErrorLevel != NULL);
- ASSERT (Marker != NULL);
- ASSERT (Format != NULL);
-
- //
- // If the GUID type is not EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID then return FALSE
- //
- if (!CompareGuid (&Data->Type, &gEfiStatusCodeDataTypeDebugGuid)) {
- return FALSE;
- }
-
- //
- // Retrieve the debug information from the status code record
- //
- DebugInfo = (EFI_DEBUG_INFO *)(Data + 1);
-
- *ErrorLevel = DebugInfo->ErrorLevel;
-
- //
- // The first 12 * UINTN bytes of the string are really an
- // argument stack to support varargs on the Format string.
- //
- *Marker = (VA_LIST) (DebugInfo + 1);
- *Format = (CHAR8 *)(((UINT64 *)*Marker) + 12);
-
- return TRUE;
-}
-
-
-/**
- Reports a status code.
-
- Reports the status code specified by the parameters Type and Value. Status
- code also require an instance, caller ID, and extended data. This function
- passed in a zero instance, NULL extended data, and a caller ID of
- gEfiCallerIdGuid, which is the GUID for the module.
-
- ReportStatusCode()must actively prevent recusrsion. If ReportStatusCode()
- is called while processing another any other Report Status Code Library function,
- then ReportStatusCode() must return immediately.
-
- @param Type Status code type.
- @param Value Status code value.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_DEVICE_ERROR There status code could not be reported due to a
- device error.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCode (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value
- )
-{
- return InternalReportStatusCode (Type, Value, 0, &gEfiCallerIdGuid, NULL);
-}
-
-
-/**
- Reports a status code with a Device Path Protocol as the extended data.
-
- Allocates and fills in the extended data section of a status code with the
- Device Path Protocol specified by DevicePath. This function is responsible
- for allocating a buffer large enough for the standard header and the device
- path. The standard header is filled in with a GUID of
- gEfiStatusCodeSpecificDataGuid. The status code is reported with a zero
- instance and a caller ID of gEfiCallerIdGuid.
-
- ReportStatusCodeWithDevicePath()must actively prevent recursion. If
- ReportStatusCodeWithDevicePath() is called while processing another any other
- Report Status Code Library function, then ReportStatusCodeWithDevicePath()
- must return EFI_DEVICE_ERROR immediately.
-
- If DevicePath is NULL, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param DevicePath Pointer to the Device Path Protocol to be reported.
-
- @retval EFI_SUCCESS The status code was reported with the extended
- data specified by DevicePath.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the
- extended data section.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeWithDevicePath (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- ASSERT (DevicePath != NULL);
- return EFI_UNSUPPORTED;
-}
-
-
-/**
- Reports a status code with an extended data buffer.
-
- Allocates and fills in the extended data section of a status code with the
- extended data specified by ExtendedData and ExtendedDataSize. ExtendedData
- is assumed to be one of the data structures specified in Related Definitions.
- These data structure do not have the standard header, so this function is
- responsible for allocating a buffer large enough for the standard header and
- the extended data passed into this function. The standard header is filled
- in with a GUID of gEfiStatusCodeSpecificDataGuid. The status code is reported
- with a zero instance and a caller ID of gEfiCallerIdGuid.
-
- ReportStatusCodeWithExtendedData()must actively prevent recursion. If
- ReportStatusCodeWithExtendedData() is called while processing another any other
- Report Status Code Library function, then ReportStatusCodeWithExtendedData()
- must return EFI_DEVICE_ERROR immediately.
-
- If ExtendedData is NULL, then ASSERT().
- If ExtendedDataSize is 0, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param ExtendedData Pointer to the extended data buffer to be reported.
- @param ExtendedDataSize The size, in bytes, of the extended data buffer to
- be reported.
-
- @retval EFI_SUCCESS The status code was reported with the extended
- data specified by ExtendedData and ExtendedDataSize.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the
- extended data section.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeWithExtendedData (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN CONST VOID *ExtendedData,
- IN UINTN ExtendedDataSize
- )
-{
- ASSERT (ExtendedData != NULL);
- ASSERT (ExtendedDataSize != 0);
- return ReportStatusCodeEx (
- Type,
- Value,
- 0,
- NULL,
- NULL,
- ExtendedData,
- ExtendedDataSize
- );
-}
-
-
-/**
- Reports a status code with full parameters.
-
- The function reports a status code. If ExtendedData is NULL and ExtendedDataSize
- is 0, then an extended data buffer is not reported. If ExtendedData is not
- NULL and ExtendedDataSize is not 0, then an extended data buffer is allocated.
- ExtendedData is assumed not have the standard status code header, so this function
- is responsible for allocating a buffer large enough for the standard header and
- the extended data passed into this function. The standard header is filled in
- with a GUID specified by ExtendedDataGuid. If ExtendedDataGuid is NULL, then a
- GUID of gEfiStatusCodeSpecificDatauid is used. The status code is reported with
- an instance specified by Instance and a caller ID specified by CallerId. If
- CallerId is NULL, then a caller ID of gEfiCallerIdGuid is used.
-
- ReportStatusCodeEx()must actively prevent recursion. If ReportStatusCodeEx()
- is called while processing another any other Report Status Code Library function,
- then ReportStatusCodeEx() must return EFI_DEVICE_ERROR immediately.
-
- If ExtendedData is NULL and ExtendedDataSize is not zero, then ASSERT().
- If ExtendedData is not NULL and ExtendedDataSize is zero, then ASSERT().
-
- @param Type Status code type.
- @param Value Status code value.
- @param Instance Status code instance number.
- @param CallerId Pointer to a GUID that identifies the caller of this
- function. If this parameter is NULL, then a caller
- ID of gEfiCallerIdGuid is used.
- @param ExtendedDataGuid Pointer to the GUID for the extended data buffer.
- If this parameter is NULL, then a the status code
- standard header is filled in with
- gEfiStatusCodeSpecificDataGuid.
- @param ExtendedData Pointer to the extended data buffer. This is an
- optional parameter that may be NULL.
- @param ExtendedDataSize The size, in bytes, of the extended data buffer.
-
- @retval EFI_SUCCESS The status code was reported.
- @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate
- the extended data section if it was specified.
- @retval EFI_UNSUPPORTED Report status code is not supported
-
-**/
-EFI_STATUS
-EFIAPI
-ReportStatusCodeEx (
- IN EFI_STATUS_CODE_TYPE Type,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN CONST EFI_GUID *CallerId OPTIONAL,
- IN CONST EFI_GUID *ExtendedDataGuid OPTIONAL,
- IN CONST VOID *ExtendedData OPTIONAL,
- IN UINTN ExtendedDataSize
- )
-{
- EFI_STATUS_CODE_DATA *StatusCodeData;
- UINT64 Buffer[MAX_EXTENDED_DATA_SIZE / sizeof (UINT64)];
-
- ASSERT (!((ExtendedData == NULL) && (ExtendedDataSize != 0)));
- ASSERT (!((ExtendedData != NULL) && (ExtendedDataSize == 0)));
-
- if (ExtendedDataSize > (MAX_EXTENDED_DATA_SIZE - sizeof (EFI_STATUS_CODE_DATA))) {
- return EFI_OUT_OF_RESOURCES;
- }
- StatusCodeData = (EFI_STATUS_CODE_DATA *)Buffer;
- StatusCodeData->HeaderSize = sizeof (EFI_STATUS_CODE_DATA);
- StatusCodeData->Size = (UINT16)ExtendedDataSize;
- if (ExtendedDataGuid == NULL) {
- ExtendedDataGuid = &gEfiStatusCodeSpecificDataGuid;
- }
- CopyGuid (&StatusCodeData->Type, ExtendedDataGuid);
- CopyMem (StatusCodeData + 1, ExtendedData, ExtendedDataSize);
- if (CallerId == NULL) {
- CallerId = &gEfiCallerIdGuid;
- }
- return InternalReportStatusCode (Type, Value, Instance, CallerId, StatusCodeData);
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportProgressCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED) != 0);
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_ERROR_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportErrorCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED) != 0);
-}
-
-
-/**
- Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled
-
- This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED
- bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.
-
- @retval TRUE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is set.
- @retval FALSE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
- PcdReportStatusCodeProperyMask is clear.
-
-**/
-BOOLEAN
-EFIAPI
-ReportDebugCodeEnabled (
- VOID
- )
-{
- return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED) != 0);
-}
|