diff options
-rw-r--r-- | IntelFrameworkPkg/Include/Framework/Legacy16.h | 253 |
1 files changed, 146 insertions, 107 deletions
diff --git a/IntelFrameworkPkg/Include/Framework/Legacy16.h b/IntelFrameworkPkg/Include/Framework/Legacy16.h index 5ca865aaee..a4ce8a054d 100644 --- a/IntelFrameworkPkg/Include/Framework/Legacy16.h +++ b/IntelFrameworkPkg/Include/Framework/Legacy16.h @@ -1,10 +1,10 @@ -/** @file
+/** @file The header file provides interface definitions exposed by CSM (Compatible Support Module).
The CSM provides compatibility support between the Framework and traditional, legacy BIOS code
and allows booting a traditional OS or booting an EFI OS off a device that requires a traditional
option ROM (OpROM).
-
+ These definitions are from Compatibility Support Module Spec Version 0.97.
Copyright (c) 2007-2009, Intel Corporation @@ -30,7 +30,7 @@ typedef UINT8 PARALLEL_MODE; #define EFI_COMPATIBILITY16_TABLE_SIGNATURE SIGNATURE_32 ('I', 'F', 'E', '$') -///
+/// /// There is a table located within the traditional BIOS in either the 0xF000:xxxx or 0xE000:xxxx
/// physical address range. It is located on a 16-byte boundary and provides the physical address of the
/// entry point for the Compatibility16 functions. These functions provide the platform-specific
@@ -38,67 +38,67 @@ typedef UINT8 PARALLEL_MODE; /// thunking by using EFI_LEGACY_BIOS_PROTOCOL.FarCall86() with the 32-bit physical
/// entry point.
/// -typedef struct {
+typedef struct { ///
/// The string "$EFI" denotes the start of the EfiCompatibility table. Byte 0 is "I," byte
/// 1 is "F," byte 2 is "E," and byte 3 is "$" and is normally accessed as a DWORD or UINT32.
/// - UINT32 Signature;
+ UINT32 Signature; ///
/// The value required such that byte checksum of TableLength equals zero.
/// - UINT8 TableChecksum;
+ UINT8 TableChecksum; ///
/// The length of this table.
/// - UINT8 TableLength;
+ UINT8 TableLength; ///
/// The major EFI revision for which this table was generated.
/// - UINT8 EfiMajorRevision;
+ UINT8 EfiMajorRevision; ///
/// The minor EFI revision for which this table was generated.
/// - UINT8 EfiMinorRevision;
+ UINT8 EfiMinorRevision; ///
/// The major revision of this table.
/// - UINT8 TableMajorRevision;
+ UINT8 TableMajorRevision; ///
/// The minor revision of this table.
/// - UINT8 TableMinorRevision;
+ UINT8 TableMinorRevision; ///
/// Reserved for future usage.
/// - UINT16 Reserved;
+ UINT16 Reserved; ///
/// The segment of the entry point within the traditional BIOS for Compatibility16 functions.
/// - UINT16 Compatibility16CallSegment;
+ UINT16 Compatibility16CallSegment; ///
/// The offset of the entry point within the traditional BIOS for Compatibility16 functions.
/// - UINT16 Compatibility16CallOffset;
+ UINT16 Compatibility16CallOffset; ///
/// The segment of the entry point within the traditional BIOS for EfiCompatibility to invoke the PnP installation check.
/// - UINT16 PnPInstallationCheckSegment;
+ UINT16 PnPInstallationCheckSegment; ///
/// The Offset of the entry point within the traditional BIOS for EfiCompatibility to invoke the PnP installation check.
/// - UINT16 PnPInstallationCheckOffset;
+ UINT16 PnPInstallationCheckOffset; ///
/// EFI system resources table. Type EFI_SYSTEM_TABLE is defined in the IntelPlatform Innovation Framework for EFI
@@ -109,7 +109,7 @@ typedef struct { ///
/// The address of an OEM-provided identifier string. The string is null terminated.
/// - UINT32 OemIdStringPointer;
+ UINT32 OemIdStringPointer; ///
/// The 32-bit physical address where ACPI RSD PTR is stored within the traditional
@@ -117,92 +117,92 @@ typedef struct { /// reserved is the maximum for ACPI 2.0. The EfiCompatibility will fill in the ACPI
/// RSD PTR with either the ACPI 1.0b or 2.0 values.
/// - UINT32 AcpiRsdPtrPointer;
+ UINT32 AcpiRsdPtrPointer; ///
/// The OEM revision number. Usage is undefined but provided for OEM module usage.
/// - UINT16 OemRevision;
+ UINT16 OemRevision; ///
/// The 32-bit physical address where INT15 E820 data is stored within the traditional
/// BIOS. The EfiCompatibility code will fill in the E820Pointer value and copy the
/// data to the indicated area.
/// - UINT32 E820Pointer;
+ UINT32 E820Pointer; ///
/// The length of the E820 data and is filled in by the EfiCompatibility code.
/// - UINT32 E820Length;
+ UINT32 E820Length; ///
/// The 32-bit physical address where the $PIR table is stored in the traditional BIOS.
/// The EfiCompatibility code will fill in the IrqRoutingTablePointer value and
/// copy the data to the indicated area.
/// - UINT32 IrqRoutingTablePointer;
+ UINT32 IrqRoutingTablePointer; ///
/// The length of the $PIR table and is filled in by the EfiCompatibility code.
/// - UINT32 IrqRoutingTableLength;
+ UINT32 IrqRoutingTableLength; ///
/// The 32-bit physical address where the MP table is stored in the traditional BIOS.
/// The EfiCompatibility code will fill in the MpTablePtr value and copy the data to the indicated area.
/// - UINT32 MpTablePtr;
+ UINT32 MpTablePtr; ///
/// The length of the MP table and is filled in by the EfiCompatibility code.
/// - UINT32 MpTableLength;
+ UINT32 MpTableLength; ///
/// The segment of the OEM-specific INT table/code.
/// - UINT16 OemIntSegment;
+ UINT16 OemIntSegment; ///
/// The offset of the OEM-specific INT table/code.
/// - UINT16 OemIntOffset;
+ UINT16 OemIntOffset; ///
/// The segment of the OEM-specific 32-bit table/code.
/// - UINT16 Oem32Segment;
+ UINT16 Oem32Segment; ///
/// The offset of the OEM-specific 32-bit table/code.
/// - UINT16 Oem32Offset;
+ UINT16 Oem32Offset; ///
/// The segment of the OEM-specific 16-bit table/code.
/// - UINT16 Oem16Segment;
+ UINT16 Oem16Segment; ///
/// The offset of the OEM-specific 16-bit table/code.
/// - UINT16 Oem16Offset;
+ UINT16 Oem16Offset; ///
/// The segment of the TPM binary passed to 16-bit CSM.
/// - UINT16 TpmSegment;
+ UINT16 TpmSegment; ///
/// The offset of the TPM binary passed to 16-bit CSM.
/// - UINT16 TpmOffset;
+ UINT16 TpmOffset; ///
/// A pointer to a string identifying the independent BIOS vendor.
/// - UINT32 IbvPointer;
+ UINT32 IbvPointer; ///
/// This field is NULL for all systems not supporting PCI Express. This field is the base
@@ -212,7 +212,7 @@ typedef struct { /// Compatibility16InitializeYourself() is defined in Compatability16
/// Functions.
/// - UINT32 PciExpressBase;
+ UINT32 PciExpressBase; ///
/// Maximum PCI bus number assigned.
@@ -224,7 +224,7 @@ typedef struct { /// Functions provided by the CSM binary which communicate between the EfiCompatibility
/// and Compatability16 code. /// -typedef enum {
+typedef enum { ///
/// Causes the Compatibility16 code to do any internal initialization required.
/// Input:
@@ -233,7 +233,7 @@ typedef enum { /// Return:
/// AX = Return Status codes
/// - Compatibility16InitializeYourself = 0x0000,
+ Compatibility16InitializeYourself = 0x0000, ///
/// Causes the Compatibility16 BIOS to perform any drive number translations to match the boot sequence.
@@ -243,7 +243,7 @@ typedef enum { /// Return:
/// AX = Returned status codes
/// - Compatibility16UpdateBbs = 0x0001,
+ Compatibility16UpdateBbs = 0x0001, ///
/// Allows the Compatibility16 code to perform any final actions before booting. The Compatibility16
@@ -254,7 +254,7 @@ typedef enum { /// Return:
/// AX = Returned status codes
/// - Compatibility16PrepareToBoot = 0x0002,
+ Compatibility16PrepareToBoot = 0x0002, ///
/// Causes the Compatibility16 BIOS to boot. The Compatibility16 code is Read/Only.
@@ -263,7 +263,7 @@ typedef enum { /// Output:
/// AX = Returned status codes
/// - Compatibility16Boot = 0x0003,
+ Compatibility16Boot = 0x0003, ///
/// Allows the Compatibility16 code to get the last device from which a boot was attempted. This is
@@ -274,7 +274,7 @@ typedef enum { /// AX = Returned status codes
/// BX = Priority number of the boot device.
/// - Compatibility16RetrieveLastBootDevice= 0x0004,
+ Compatibility16RetrieveLastBootDevice= 0x0004, ///
/// Allows the Compatibility16 code rehook INT13, INT18, and/or INT19 after dispatching a legacy OpROM.
@@ -285,7 +285,7 @@ typedef enum { /// AX = Returned status codes
/// BX = Number of non-BBS-compliant devices found. Equals 0 if BBS compliant.
/// - Compatibility16DispatchOprom = 0x0005,
+ Compatibility16DispatchOprom = 0x0005, ///
/// Finds a free area in the 0xFxxxx or 0xExxxx region of the specified length and returns the address
@@ -302,7 +302,7 @@ typedef enum { /// AX = Returned status codes
/// DS:BX = Address of the region
/// - Compatibility16GetTableAddress = 0x0006,
+ Compatibility16GetTableAddress = 0x0006, ///
/// Enables the EfiCompatibility module to do any nonstandard processing of keyboard LEDs or state.
@@ -315,7 +315,7 @@ typedef enum { /// Output:
/// AX = Returned status codes
/// - Compatibility16SetKeyboardLeds = 0x0007,
+ Compatibility16SetKeyboardLeds = 0x0007, ///
/// Enables the EfiCompatibility module to install an interrupt handler for PCI mass media devices that
@@ -339,67 +339,67 @@ typedef struct { UINT16 OpromSegment; ///< The segment where the OpROM was placed. Offset is assumed to be 3. UINT8 PciBus; ///< The PCI bus. UINT8 PciDeviceFunction; ///< The PCI device * 0x08 | PCI function. - UINT8 NumberBbsEntries; ///< The number of valid BBS table entries upon entry and exit. The IBV code may
- ///< increase this number, if BBS-compliant devices also hook INTs in order to force the
+ UINT8 NumberBbsEntries; ///< The number of valid BBS table entries upon entry and exit. The IBV code may + ///< increase this number, if BBS-compliant devices also hook INTs in order to force the ///< OpROM BIOS Setup to be executed. VOID *BbsTablePointer; ///< Pointer to the BBS table. - UINT16 OpromDestinationSegment; ///< The segment where the OpROM can be relocated to. If this value is 0x0000, this
+ UINT16 OpromDestinationSegment; ///< The segment where the OpROM can be relocated to. If this value is 0x0000, this ///< means that the relocation of this run time code is not supported. } EFI_DISPATCH_OPROM_TABLE; /// /// EFI_TO_COMPATIBILITY16_INIT_TABLE /// -typedef struct {
+typedef struct { ///
/// Starting address of memory under 1 MB. The ending address is assumed to be 640 KB or 0x9FFFF.
/// - UINT32 BiosLessThan1MB;
+ UINT32 BiosLessThan1MB; ///
/// Starting address of the high memory block.
/// - UINT32 HiPmmMemory;
+ UINT32 HiPmmMemory; ///
/// Length of high memory block.
/// - UINT32 HiPmmMemorySizeInBytes;
+ UINT32 HiPmmMemorySizeInBytes; ///
/// The segment of the reverse thunk call code.
/// - UINT16 ReverseThunkCallSegment;
+ UINT16 ReverseThunkCallSegment; ///
/// The offset of the reverse thunk call code.
/// - UINT16 ReverseThunkCallOffset;
+ UINT16 ReverseThunkCallOffset; ///
/// The number of E820 entries copied to the Compatibility16 BIOS.
/// - UINT32 NumberE820Entries;
+ UINT32 NumberE820Entries; ///
/// The amount of usable memory above 1 MB, e.g., E820 type 1 memory.
/// - UINT32 OsMemoryAbove1Mb;
+ UINT32 OsMemoryAbove1Mb; ///
/// The start of thunk code in main memory. Memory cannot be used by BIOS or PMM.
/// - UINT32 ThunkStart;
+ UINT32 ThunkStart; ///
/// The size of the thunk code.
/// - UINT32 ThunkSizeInBytes;
+ UINT32 ThunkSizeInBytes; ///
/// Starting address of memory under 1 MB.
/// - UINT32 LowPmmMemory;
+ UINT32 LowPmmMemory; ///
/// Length of low Memory block.
@@ -408,7 +408,7 @@ typedef struct { } EFI_TO_COMPATIBILITY16_INIT_TABLE; /// -/// DEVICE_PRODUCER_SERIAL & its modes +/// DEVICE_PRODUCER_SERIAL /// typedef struct { UINT16 Address; ///< I/O address assigned to the serial port @@ -416,14 +416,18 @@ typedef struct { SERIAL_MODE Mode; ///< Mode of serial port. Values are defined below. } DEVICE_PRODUCER_SERIAL; +/// +/// DEVICE_PRODUCER_SERIAL's modes +///@{ #define DEVICE_SERIAL_MODE_NORMAL 0x00 #define DEVICE_SERIAL_MODE_IRDA 0x01 #define DEVICE_SERIAL_MODE_ASK_IR 0x02 #define DEVICE_SERIAL_MODE_DUPLEX_HALF 0x00 #define DEVICE_SERIAL_MODE_DUPLEX_FULL 0x10 +///@) /// -/// DEVICE_PRODUCER_PARALLEL & its modes +/// DEVICE_PRODUCER_PARALLEL /// typedef struct { UINT16 Address; ///< I/O address assigned to the parallel port @@ -432,10 +436,14 @@ typedef struct { PARALLEL_MODE Mode; ///< Mode of the parallel port. Values are defined below. } DEVICE_PRODUCER_PARALLEL; +/// +/// DEVICE_PRODUCER_PARALLEL's modes +///@{ #define DEVICE_PARALLEL_MODE_MODE_OUTPUT_ONLY 0x00 #define DEVICE_PARALLEL_MODE_MODE_BIDIRECTIONAL 0x01 #define DEVICE_PARALLEL_MODE_MODE_EPP 0x02 #define DEVICE_PARALLEL_MODE_MODE_ECP 0x03 +///@} /// /// DEVICE_PRODUCER_FLOPPY @@ -475,9 +483,9 @@ typedef struct { } ATAPI_IDENTIFY; /// -/// HDD_INFO & its status +/// HDD_INFO /// -typedef struct {
+typedef struct { ///
/// Status of IDE device. Values are defined below. There is one HDD_INFO structure
/// per IDE controller. The IdentifyDrive is per drive. Index 0 is master and index
@@ -488,34 +496,34 @@ typedef struct { ///
/// PCI bus of IDE controller.
/// - UINT32 Bus;
+ UINT32 Bus; ///
/// PCI device of IDE controller.
/// - UINT32 Device;
+ UINT32 Device; ///
/// PCI function of IDE controller.
/// - UINT32 Function;
+ UINT32 Function; ///
/// Command ports base address.
/// - UINT16 CommandBaseAddress;
+ UINT16 CommandBaseAddress; ///
/// Control ports base address.
/// - UINT16 ControlBaseAddress;
+ UINT16 ControlBaseAddress; ///
/// Bus master address
/// - UINT16 BusMasterAddress;
+ UINT16 BusMasterAddress; - UINT8 HddIrq;
+ UINT8 HddIrq; ///
/// Data that identifies the drive data, one per possible attached drive
@@ -523,6 +531,9 @@ typedef struct { ATAPI_IDENTIFY IdentifyDrive[2]; } HDD_INFO; +/// +/// HDD_INFO status bits +/// #define HDD_PRIMARY 0x01 #define HDD_SECONDARY 0x02 #define HDD_MASTER_ATAPI_CDROM 0x04 @@ -556,68 +567,68 @@ typedef struct { /// /// BBS_TABLE, device type values & boot priority values /// -typedef struct {
+typedef struct { ///
/// The boot priority for this boot device. Values are defined below.
/// - UINT16 BootPriority;
+ UINT16 BootPriority; ///
/// The PCI bus for this boot device.
/// - UINT32 Bus;
+ UINT32 Bus; ///
/// The PCI device for this boot device.
/// - UINT32 Device;
+ UINT32 Device; ///
/// The PCI function for the boot device.
/// - UINT32 Function;
+ UINT32 Function; ///
/// The PCI class for this boot device.
/// - UINT8 Class;
+ UINT8 Class; ///
/// The PCI Subclass for this boot device.
/// - UINT8 SubClass;
+ UINT8 SubClass; ///
/// Segment:offset address of an ASCIIZ description string describing the manufacturer.
/// - UINT16 MfgStringOffset;
+ UINT16 MfgStringOffset; ///
/// Segment:offset address of an ASCIIZ description string describing the manufacturer.
/// - UINT16 MfgStringSegment;
+ UINT16 MfgStringSegment; ///
/// BBS device type. BBS device types are defined below.
/// - UINT16 DeviceType;
+ UINT16 DeviceType; ///
/// Status of this boot device. Type BBS_STATUS_FLAGS is defined below.
/// - BBS_STATUS_FLAGS StatusFlags;
+ BBS_STATUS_FLAGS StatusFlags; ///
/// Segment:Offset address of boot loader for IPL devices or install INT13 handler for
/// BCV devices.
/// - UINT16 BootHandlerOffset;
+ UINT16 BootHandlerOffset; ///
/// Segment:Offset address of boot loader for IPL devices or install INT13 handler for
/// BCV devices.
/// - UINT16 BootHandlerSegment;
+ UINT16 BootHandlerSegment; ///
/// Segment:offset address of an ASCIIZ description string describing this device.
@@ -627,33 +638,33 @@ typedef struct { ///
/// Segment:offset address of an ASCIIZ description string describing this device.
///
- UINT16 DescStringSegment;
+ UINT16 DescStringSegment; ///
/// Reserved.
/// - UINT32 InitPerReserved;
+ UINT32 InitPerReserved; ///
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
/// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI
/// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup
/// - UINT32 AdditionalIrq13Handler;
+ UINT32 AdditionalIrq13Handler; ///
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
/// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI
/// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup
/// - UINT32 AdditionalIrq18Handler;
+ UINT32 AdditionalIrq18Handler; ///
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
/// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI
/// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup
/// - UINT32 AdditionalIrq19Handler;
+ UINT32 AdditionalIrq19Handler; ///
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
@@ -668,6 +679,9 @@ typedef struct { UINT32 IBV2; } BBS_TABLE; +/// +/// BBS device type values +///@{ #define BBS_FLOPPY 0x01 #define BBS_HARDDISK 0x02 #define BBS_CDROM 0x03 @@ -676,31 +690,36 @@ typedef struct { #define BBS_EMBED_NETWORK 0x06 #define BBS_BEV_DEVICE 0x80 #define BBS_UNKNOWN 0xff +///@} +/// +/// BBS boot priority values +///@{ #define BBS_DO_NOT_BOOT_FROM 0xFFFC #define BBS_LOWEST_PRIORITY 0xFFFD #define BBS_UNPRIORITIZED_ENTRY 0xFFFE #define BBS_IGNORE_ENTRY 0xFFFF +///@} /// -/// SMM_ATTRIBUTES & relating type, port and data size constants +/// SMM_ATTRIBUTES /// -typedef struct {
+typedef struct { ///
/// Access mechanism used to generate the soft SMI. Defined types are below. The other
/// values are reserved for future usage.
/// - UINT16 Type : 3;
+ UINT16 Type : 3; ///
/// Size of "port" in bits. Defined values are below.
/// - UINT16 PortGranularity : 3;
+ UINT16 PortGranularity : 3; ///
/// Size of data in bits. Defined values are below.
/// - UINT16 DataGranularity : 3;
+ UINT16 DataGranularity : 3; ///
/// Reserved for future use.
@@ -708,18 +727,30 @@ typedef struct { UINT16 Reserved : 7; } SMM_ATTRIBUTES; +/// +/// SMM_ATTRIBUTES type values +///@{ #define STANDARD_IO 0x00 #define STANDARD_MEMORY 0x01 +///@} +/// +/// SMM_ATTRIBUTES port size constants +///@{ #define PORT_SIZE_8 0x00 #define PORT_SIZE_16 0x01 #define PORT_SIZE_32 0x02 #define PORT_SIZE_64 0x03 +///@} +/// +/// SMM_ATTRIBUTES data size constants +///@{ #define DATA_SIZE_8 0x00 #define DATA_SIZE_16 0x01 #define DATA_SIZE_32 0x02 #define DATA_SIZE_64 0x03 +///@} /// /// SMM_FUNCTION & relating constants @@ -729,12 +760,20 @@ typedef struct { UINT16 Owner : 1; } SMM_FUNCTION; +/// +/// SMM_FUNCTION Function constants +///@{ #define INT15_D042 0x0000 #define GET_USB_BOOT_INFO 0x0001 #define DMI_PNP_50_57 0x0002 +///@} +/// +/// SMM_FUNCTION Owner constants +///@{ #define STANDARD_OWNER 0x0 #define OEM_OWNER 0x1 +///@} /** * SMM_ENTRY @@ -742,22 +781,22 @@ typedef struct { * This structure assumes both port and data sizes are 1. SmmAttribute must be * properly to reflect that assumption. **/ -typedef struct {
+typedef struct { ///
/// Describes the access mechanism, SmmPort, and SmmData sizes. Type
/// SMM_ATTRIBUTES is defined below.
/// - SMM_ATTRIBUTES SmmAttributes;
+ SMM_ATTRIBUTES SmmAttributes; ///
/// Function Soft SMI is to perform. Type SMM_FUNCTION is defined below.
/// - SMM_FUNCTION SmmFunction;
+ SMM_FUNCTION SmmFunction; ///
/// SmmPort size depends upon SmmAttributes and ranges from2 bytes to 16 bytes
/// - UINT8 SmmPort;
+ UINT8 SmmPort; ///
/// SmmData size depends upon SmmAttributes and ranges from2 bytes to 16 bytes
@@ -776,22 +815,22 @@ typedef struct { /// /// UDC_ATTRIBUTES /// -typedef struct {
+typedef struct { ///
/// This bit set indicates that the ServiceAreaData is valid.
/// - UINT8 DirectoryServiceValidity : 1;
+ UINT8 DirectoryServiceValidity : 1; ///
/// This bit set indicates to use the Reserve Area Boot Code Address (RACBA) only if
/// DirectoryServiceValidity is 0.
/// - UINT8 RabcaUsedFlag : 1;
+ UINT8 RabcaUsedFlag : 1; ///
/// This bit set indicates to execute hard disk diagnostics.
/// - UINT8 ExecuteHddDiagnosticsFlag : 1;
+ UINT8 ExecuteHddDiagnosticsFlag : 1; ///
/// Reserved for future use. Set to 0.
@@ -802,40 +841,40 @@ typedef struct { /// /// UD_TABLE /// -typedef struct {
+typedef struct { ///
/// This field contains the bit-mapped attributes of the PARTIES information. Type
/// UDC_ATTRIBUTES is defined below.
/// - UDC_ATTRIBUTES Attributes;
+ UDC_ATTRIBUTES Attributes; ///
/// This field contains the zero-based device on which the selected
/// ServiceDataArea is present. It is 0 for master and 1 for the slave device.
/// - UINT8 DeviceNumber;
+ UINT8 DeviceNumber; ///
/// This field contains the zero-based index into the BbsTable for the parent device.
/// This index allows the user to reference the parent device information such as PCI
/// bus, device function.
/// - UINT8 BbsTableEntryNumberForParentDevice;
+ UINT8 BbsTableEntryNumberForParentDevice; ///
/// This field contains the zero-based index into the BbsTable for the boot entry.
/// - UINT8 BbsTableEntryNumberForBoot;
+ UINT8 BbsTableEntryNumberForBoot; ///
/// This field contains the zero-based index into the BbsTable for the HDD diagnostics entry.
/// - UINT8 BbsTableEntryNumberForHddDiag;
+ UINT8 BbsTableEntryNumberForHddDiag; ///
/// The raw Beer data.
/// - UINT8 BeerData[128];
+ UINT8 BeerData[128]; ///
/// The raw data of selected service area.
|