diff options
44 files changed, 8949 insertions, 0 deletions
diff --git a/SourceLevelDebugPkg/Include/Guid/DebugAgentGuid.h b/SourceLevelDebugPkg/Include/Guid/DebugAgentGuid.h new file mode 100644 index 0000000000..87776a31f9 --- /dev/null +++ b/SourceLevelDebugPkg/Include/Guid/DebugAgentGuid.h @@ -0,0 +1,32 @@ +/** @file
+ This file defines the debug agent GUID for HOB and configuration table.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __EFI_DEBUG_AGNET_GUID_H__
+#define __EFI_DEBUG_AGENT_GUID_H__
+
+///
+/// This guid is used as a variable GUID for the capsule variable
+/// if the capsule pointer is passed through reset via a variable.
+///
+/// This guid is also used as a hob GUID for the capsule data
+/// when the capsule pointer is passed from PEI phase to DXE phase.
+///
+#define EFI_DEBUG_AGENT_GUID \
+ { \
+ 0x865a5a9b, 0xb85d, 0x474c, { 0x84, 0x55, 0x65, 0xd1, 0xbe, 0x84, 0x4b, 0xe2 } \
+ }
+
+extern EFI_GUID gEfiDebugAgentGuid;
+
+#endif
diff --git a/SourceLevelDebugPkg/Include/Ia32/ProcessorContext.h b/SourceLevelDebugPkg/Include/Ia32/ProcessorContext.h new file mode 100644 index 0000000000..d2759b5be7 --- /dev/null +++ b/SourceLevelDebugPkg/Include/Ia32/ProcessorContext.h @@ -0,0 +1,179 @@ +/** @file
+ IA32/x64 architecture specific defintions needed by debug transfer protocol.It is only
+ intended to be used by Debug related module implementation.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __PROCESSOR_CONTEXT_H__
+#define __PROCESSOR_CONTEXT_H__
+
+//
+// IA-32/x64 processor register index table
+//
+#define SOFT_DEBUGGER_REGISTER_DR0 0
+#define SOFT_DEBUGGER_REGISTER_DR1 1
+#define SOFT_DEBUGGER_REGISTER_DR2 2
+#define SOFT_DEBUGGER_REGISTER_DR3 3
+#define SOFT_DEBUGGER_REGISTER_DR6 4
+#define SOFT_DEBUGGER_REGISTER_DR7 5
+#define SOFT_DEBUGGER_REGISTER_EFLAGS 6
+#define SOFT_DEBUGGER_REGISTER_LDTR 7
+#define SOFT_DEBUGGER_REGISTER_TR 8
+#define SOFT_DEBUGGER_REGISTER_GDTR0 9 // the low 32bit of GDTR
+#define SOFT_DEBUGGER_REGISTER_GDTR1 10 // the high 32bit of GDTR
+#define SOFT_DEBUGGER_REGISTER_IDTR0 11 // the low 32bit of IDTR
+#define SOFT_DEBUGGER_REGISTER_IDTR1 12 // the high 32bot of IDTR
+#define SOFT_DEBUGGER_REGISTER_EIP 13
+#define SOFT_DEBUGGER_REGISTER_GS 14
+#define SOFT_DEBUGGER_REGISTER_FS 15
+#define SOFT_DEBUGGER_REGISTER_ES 16
+#define SOFT_DEBUGGER_REGISTER_DS 17
+#define SOFT_DEBUGGER_REGISTER_CS 18
+#define SOFT_DEBUGGER_REGISTER_SS 19
+#define SOFT_DEBUGGER_REGISTER_CR0 20
+#define SOFT_DEBUGGER_REGISTER_CR1 21
+#define SOFT_DEBUGGER_REGISTER_CR2 22
+#define SOFT_DEBUGGER_REGISTER_CR3 23
+#define SOFT_DEBUGGER_REGISTER_CR4 24
+
+#define SOFT_DEBUGGER_REGISTER_DI 25
+#define SOFT_DEBUGGER_REGISTER_SI 26
+#define SOFT_DEBUGGER_REGISTER_BP 27
+#define SOFT_DEBUGGER_REGISTER_SP 28
+#define SOFT_DEBUGGER_REGISTER_DX 29
+#define SOFT_DEBUGGER_REGISTER_CX 30
+#define SOFT_DEBUGGER_REGISTER_BX 31
+#define SOFT_DEBUGGER_REGISTER_AX 32
+
+//
+// This below registers are only available for x64 (not valid for Ia32 mode)
+//
+#define SOFT_DEBUGGER_REGISTER_CR8 33
+#define SOFT_DEBUGGER_REGISTER_R8 34
+#define SOFT_DEBUGGER_REGISTER_R9 35
+#define SOFT_DEBUGGER_REGISTER_R10 36
+#define SOFT_DEBUGGER_REGISTER_R11 37
+#define SOFT_DEBUGGER_REGISTER_R12 38
+#define SOFT_DEBUGGER_REGISTER_R13 39
+#define SOFT_DEBUGGER_REGISTER_R14 40
+#define SOFT_DEBUGGER_REGISTER_R15 41
+
+#define SOFT_DEBUGGER_REGISTER_MAX_COUNT_IA32 33
+#define SOFT_DEBUGGER_REGISTER_MAX_COUNT_X64 42
+
+//
+// This below registers are FP / MMX / XMM registers
+//
+#define SOFT_DEBUGGER_REGISTER_FP_BASE 50
+
+#define SOFT_DEBUGGER_REGISTER_FP_FCW (SOFT_DEBUGGER_REGISTER_FP_BASE + 0)
+#define SOFT_DEBUGGER_REGISTER_FP_FSW (SOFT_DEBUGGER_REGISTER_FP_BASE + 1)
+#define SOFT_DEBUGGER_REGISTER_FP_FTW (SOFT_DEBUGGER_REGISTER_FP_BASE + 2)
+#define SOFT_DEBUGGER_REGISTER_FP_OPCODE (SOFT_DEBUGGER_REGISTER_FP_BASE + 3)
+#define SOFT_DEBUGGER_REGISTER_FP_EIP (SOFT_DEBUGGER_REGISTER_FP_BASE + 4)
+#define SOFT_DEBUGGER_REGISTER_FP_CS (SOFT_DEBUGGER_REGISTER_FP_BASE + 5)
+#define SOFT_DEBUGGER_REGISTER_FP_DATAOFFSET (SOFT_DEBUGGER_REGISTER_FP_BASE + 6)
+#define SOFT_DEBUGGER_REGISTER_FP_DS (SOFT_DEBUGGER_REGISTER_FP_BASE + 7)
+#define SOFT_DEBUGGER_REGISTER_FP_MXCSR (SOFT_DEBUGGER_REGISTER_FP_BASE + 8)
+#define SOFT_DEBUGGER_REGISTER_FP_MXCSR_MASK (SOFT_DEBUGGER_REGISTER_FP_BASE + 9)
+#define SOFT_DEBUGGER_REGISTER_ST0 (SOFT_DEBUGGER_REGISTER_FP_BASE + 10)
+#define SOFT_DEBUGGER_REGISTER_ST1 (SOFT_DEBUGGER_REGISTER_FP_BASE + 11)
+#define SOFT_DEBUGGER_REGISTER_ST2 (SOFT_DEBUGGER_REGISTER_FP_BASE + 12)
+#define SOFT_DEBUGGER_REGISTER_ST3 (SOFT_DEBUGGER_REGISTER_FP_BASE + 13)
+#define SOFT_DEBUGGER_REGISTER_ST4 (SOFT_DEBUGGER_REGISTER_FP_BASE + 14)
+#define SOFT_DEBUGGER_REGISTER_ST5 (SOFT_DEBUGGER_REGISTER_FP_BASE + 15)
+#define SOFT_DEBUGGER_REGISTER_ST6 (SOFT_DEBUGGER_REGISTER_FP_BASE + 16)
+#define SOFT_DEBUGGER_REGISTER_ST7 (SOFT_DEBUGGER_REGISTER_FP_BASE + 17)
+#define SOFT_DEBUGGER_REGISTER_XMM0 (SOFT_DEBUGGER_REGISTER_FP_BASE + 18)
+#define SOFT_DEBUGGER_REGISTER_XMM1 (SOFT_DEBUGGER_REGISTER_FP_BASE + 19)
+#define SOFT_DEBUGGER_REGISTER_XMM2 (SOFT_DEBUGGER_REGISTER_FP_BASE + 20)
+#define SOFT_DEBUGGER_REGISTER_XMM3 (SOFT_DEBUGGER_REGISTER_FP_BASE + 21)
+#define SOFT_DEBUGGER_REGISTER_XMM4 (SOFT_DEBUGGER_REGISTER_FP_BASE + 22)
+#define SOFT_DEBUGGER_REGISTER_XMM5 (SOFT_DEBUGGER_REGISTER_FP_BASE + 23)
+#define SOFT_DEBUGGER_REGISTER_XMM6 (SOFT_DEBUGGER_REGISTER_FP_BASE + 24)
+#define SOFT_DEBUGGER_REGISTER_XMM7 (SOFT_DEBUGGER_REGISTER_FP_BASE + 25)
+#define SOFT_DEBUGGER_REGISTER_XMM8 (SOFT_DEBUGGER_REGISTER_FP_BASE + 26)
+#define SOFT_DEBUGGER_REGISTER_XMM9 (SOFT_DEBUGGER_REGISTER_FP_BASE + 27)
+#define SOFT_DEBUGGER_REGISTER_XMM10 (SOFT_DEBUGGER_REGISTER_FP_BASE + 28)
+#define SOFT_DEBUGGER_REGISTER_XMM11 (SOFT_DEBUGGER_REGISTER_FP_BASE + 29)
+#define SOFT_DEBUGGER_REGISTER_XMM12 (SOFT_DEBUGGER_REGISTER_FP_BASE + 30)
+#define SOFT_DEBUGGER_REGISTER_XMM13 (SOFT_DEBUGGER_REGISTER_FP_BASE + 31)
+#define SOFT_DEBUGGER_REGISTER_XMM14 (SOFT_DEBUGGER_REGISTER_FP_BASE + 32)
+#define SOFT_DEBUGGER_REGISTER_XMM15 (SOFT_DEBUGGER_REGISTER_FP_BASE + 33)
+#define SOFT_DEBUGGER_REGISTER_MM0 (SOFT_DEBUGGER_REGISTER_FP_BASE + 34)
+#define SOFT_DEBUGGER_REGISTER_MM1 (SOFT_DEBUGGER_REGISTER_FP_BASE + 35)
+#define SOFT_DEBUGGER_REGISTER_MM2 (SOFT_DEBUGGER_REGISTER_FP_BASE + 36)
+#define SOFT_DEBUGGER_REGISTER_MM3 (SOFT_DEBUGGER_REGISTER_FP_BASE + 37)
+#define SOFT_DEBUGGER_REGISTER_MM4 (SOFT_DEBUGGER_REGISTER_FP_BASE + 38)
+#define SOFT_DEBUGGER_REGISTER_MM5 (SOFT_DEBUGGER_REGISTER_FP_BASE + 39)
+#define SOFT_DEBUGGER_REGISTER_MM6 (SOFT_DEBUGGER_REGISTER_FP_BASE + 40)
+#define SOFT_DEBUGGER_REGISTER_MM7 (SOFT_DEBUGGER_REGISTER_FP_BASE + 41)
+
+//
+// This below registers are for GDT, LDT, TSS
+//
+#define SOFT_DEBUGGER_REGISTER_OTHERS_BASE 100
+
+#define SOFT_DEBUGGER_REGISTER_CS_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 0)
+#define SOFT_DEBUGGER_REGISTER_SS_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 1)
+#define SOFT_DEBUGGER_REGISTER_GS_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 2)
+#define SOFT_DEBUGGER_REGISTER_FS_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 3)
+#define SOFT_DEBUGGER_REGISTER_ES_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 4)
+#define SOFT_DEBUGGER_REGISTER_DS_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 5)
+#define SOFT_DEBUGGER_REGISTER_LDT_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 6)
+#define SOFT_DEBUGGER_REGISTER_TSS_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 7)
+
+#define SOFT_DEBUGGER_REGISTER_CS_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 8)
+#define SOFT_DEBUGGER_REGISTER_SS_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 9)
+#define SOFT_DEBUGGER_REGISTER_GS_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 10)
+#define SOFT_DEBUGGER_REGISTER_FS_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 11)
+#define SOFT_DEBUGGER_REGISTER_ES_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 12)
+#define SOFT_DEBUGGER_REGISTER_DS_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 13)
+#define SOFT_DEBUGGER_REGISTER_LDT_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 14)
+#define SOFT_DEBUGGER_REGISTER_TSS_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 15)
+
+#define SOFT_DEBUGGER_REGISTER_CSAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 16)
+#define SOFT_DEBUGGER_REGISTER_SSAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 17)
+#define SOFT_DEBUGGER_REGISTER_GSAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 18)
+#define SOFT_DEBUGGER_REGISTER_FSAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 19)
+#define SOFT_DEBUGGER_REGISTER_ESAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 20)
+#define SOFT_DEBUGGER_REGISTER_DSAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 21)
+#define SOFT_DEBUGGER_REGISTER_LDTAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 22)
+#define SOFT_DEBUGGER_REGISTER_TSSAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 23)
+
+#define SOFT_DEBUGGER_REGISTER_IDT_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 24)
+#define SOFT_DEBUGGER_REGISTER_GDT_LIM (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 25)
+#define SOFT_DEBUGGER_REGISTER_IDT_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 26)
+#define SOFT_DEBUGGER_REGISTER_GDT_BAS (SOFT_DEBUGGER_REGISTER_OTHERS_BASE + 27)
+
+
+#define SOFT_DEBUGGER_MSR_EFER (0xC0000080)
+
+//
+// Definition for the Index field for DEBUG_DATA_READ_REGISTER_GROUP
+//
+#define SOFT_DEBUGGER_REGISTER_GROUP_GPDRS32 1 //for cs,ds,es,fs,gs,ss,eflags,ebp,eip,esp,eax,ebx,ecx,edx,esi,edi,dr0,dr1,dr2,dr3,dr6,dr7
+#define SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_LIMITS32 2 //for cslim,sslim,gslim,fslim,eslim,dslim,ldtlim,tsslim
+#define SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_BASES32 3 //for csbas,ssbas,gsbas,fsbas,esbas,dsbas,ldtbas,tssbas
+
+#define SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT64 4 //for cs,ds,es,fs,gs,ss
+#define SOFT_DEBUGGER_REGISTER_GROUP_GP2_64 5 //for eflags,rbp,rip,rsp
+#define SOFT_DEBUGGER_REGISTER_GROUP_GP64 6 //for rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12,r13,r14,r15
+#define SOFT_DEBUGGER_REGISTER_GROUP_DR64 7 //for dr0,dr1,dr2,dr3,dr6,dr7
+#define SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_BAS_LIM64 8 //for ldtbas,ldtlim,gdtbas,gdtlim,cslim,sslim,gslim,fslim,eslim,dslim,ldtlim,tsslim,csbas,ssbas,gsbas,fsbas,esbas,dsbas,ldtbas,tssbas
+#define SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_BASES64 9 //for idtr,tr,csas,ssas,gsas,fsas,esas,dsas,idtas,tssas
+#define SOFT_DEBUGGER_REGISTER_GROUP_CR64 10 //for cr0,cr2,cr3,cr4,cr8
+#define SOFT_DEBUGGER_REGISTER_GROUP_XMM64 11 //for xmm0,xmm1,xmm2,xmm3,xmm4,xmm5,xmm6,xmm7,xmm8,xmm9,xmm10,xmm11,xmm12,xmm13,xmm14,xmm15
+
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Include/ImageDebugSupport.h b/SourceLevelDebugPkg/Include/ImageDebugSupport.h new file mode 100644 index 0000000000..68299857a6 --- /dev/null +++ b/SourceLevelDebugPkg/Include/ImageDebugSupport.h @@ -0,0 +1,27 @@ +/** @file
+ Public include file for Debug Agent Library instance and PE/COFF Extra
+ Action Library instance.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __IMAGE_DEBUG_SUPPORT_H__
+#define __IMAGE_DEBUG_SUPPORT_H__
+
+#define IO_PORT_BREAKPOINT_ADDRESS 0x84
+#define IMAGE_LOAD_SIGNATURE SIGNATURE_32('L','O','A','D')
+#define IMAGE_UNLOAD_SIGNATURE SIGNATURE_32('U','N','L','O')
+
+#define DEBUG_AGENT_IMAGE_WAIT 0x00
+#define DEBUG_AGENT_IMAGE_CONTINUE 0x01
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Include/Library/DebugCommunicationLib.h b/SourceLevelDebugPkg/Include/Library/DebugCommunicationLib.h new file mode 100644 index 0000000000..8fc0aa73ea --- /dev/null +++ b/SourceLevelDebugPkg/Include/Library/DebugCommunicationLib.h @@ -0,0 +1,152 @@ +/** @file
+ Debug Communication Library definitions.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __DEBUG_COMMUNICATION_LIB_H__
+#define __DEBUG_COMMUNICATION_LIB_H__
+
+typedef VOID * DEBUG_PORT_HANDLE;
+
+/**
+ Caller provided function to be invoked at the end of DebugPortInitialize().
+
+ Refer to the descrption for DebugPortInitialize() for more details.
+
+ @param[in] Context The first input argument of DebugPortInitialize().
+ @param[in] DebugPortHandle Debug port handle created by Debug Communication Libary.
+
+**/
+typedef
+VOID
+(EFIAPI * DEBUG_PORT_CONTINUE)(
+ IN VOID *Context,
+ IN DEBUG_PORT_HANDLE DebugPortHandle
+ );
+
+/**
+ Initialize the debug port.
+
+ This function will initialize debug port to get it ready for data transmition. If
+ certain Debug Communication Library instance has to save some private data in the
+ stack, this function must work on the mode that doesn't return to the caller, then
+ the caller needs to wrap up all rest of logic after DebugPortInitialize() into one
+ function and pass it into DebugPortInitialize(). DebugPortInitialize() is
+ responsible to invoke the passing-in funciton at the end of DebugPortInitialize().
+
+ If the paramter Function is not NULL, Debug Communication Libary instance will
+ invoke it by passing in the Context to be the first parameter. Debug Communication
+ Library instance could create one debug port handle to be the second parameter
+ passing into the Function. Debug Communication Library instance also could pass
+ NULL to be the second parameter if it doesn't create the debug port handle.
+
+ If the parameter Function is NULL, and Context is not NULL. At this time, Context
+ is the debug port handle created by the previous Debug Communication Library
+ instance.
+ a) If the instance can understand and continue use the private data of the previous
+ instance, it could return the same handle as passed in (as Context parameter).
+ b) If the instance does not understand, or does not want to continue use the
+ private data of the previous instance, it could ignore the input Context parameter
+ and create the new hanlde to be returned.
+
+ If Function() is NULL and Context is NULL, Debug Communication Library could create a
+ new handle and return it. NULL is also a valid handle to be returned.
+
+ @param[in] Context Context needed by callback function; it was optional.
+ @param[in] Function Continue function called by Debug Communication library;
+ it was optional.
+
+ @return The debug port handle created by Debug Communication Library if Function
+ is not NULL.
+
+**/
+DEBUG_PORT_HANDLE
+EFIAPI
+DebugPortInitialize (
+ IN VOID *Context,
+ IN DEBUG_PORT_CONTINUE Function
+ );
+
+
+/**
+ Read data from debug device and save the datas in buffer.
+
+ Reads NumberOfBytes data bytes from a debug device into the buffer
+ specified by Buffer. The number of bytes actually read is returned.
+ If the return value is less than NumberOfBytes, then the rest operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to store the data read from the debug device.
+ @param NumberOfBytes Number of bytes which will be read.
+ @param Timeout Timeout value for reading from debug device. It unit is Microsecond.
+
+ @retval 0 Read data failed, no data is to be read.
+ @retval >0 Actual number of bytes read from debug device.
+
+**/
+UINTN
+EFIAPI
+DebugPortReadBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes,
+ IN UINTN Timeout
+ );
+
+
+/**
+ Write data from buffer to debug device.
+
+ Writes NumberOfBytes data bytes from Buffer to the debug device.
+ The number of bytes actually written to the debug device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to be written.
+ @param NumberOfBytes Number of bytes to written to the debug device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the debug device.
+ If this value is less than NumberOfBytes, then the read operation failed.
+
+**/
+UINTN
+EFIAPI
+DebugPortWriteBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ );
+
+/**
+ Polls a debug device to see if there is any data waiting to be read.
+
+ Polls a debug device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the debug device, then TRUE is returned.
+ If there is no data waiting to be read from the debug device, then FALSE is returned.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE Data is waiting to be read from the debug device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPortPollBuffer (
+ IN DEBUG_PORT_HANDLE Handle
+ );
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Include/SoftDebuggerDefinitions.h b/SourceLevelDebugPkg/Include/SoftDebuggerDefinitions.h new file mode 100644 index 0000000000..4e2b638227 --- /dev/null +++ b/SourceLevelDebugPkg/Include/SoftDebuggerDefinitions.h @@ -0,0 +1,42 @@ +/** @file
+ Soft Debugger defintions. The definitions will also be used as part
+ of debug transfer protocol. It is only intended to be used by Debug
+ related module implementation.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __SOFT_DEBUGGER_DEFINITIONS_H__
+#define __SOFT_DEBUGGER_DEFINITIONS_H__
+
+//
+// Definition for processor mode (IA16, IA32, X64, ...)
+//
+#define SOFT_DEBUGGER_PROCESSOR_IA16 0
+#define SOFT_DEBUGGER_PROCESSOR_IA32 1
+#define SOFT_DEBUGGER_PROCESSOR_X64 2
+
+//
+// Break cause defintions
+//
+#define SOFT_DEBUGGER_BREAK_CAUSE_UNKNOWN 0
+#define SOFT_DEBUGGER_BREAK_CAUSE_HW_BREAKPOINT 1
+#define SOFT_DEBUGGER_BREAK_CAUSE_STEPPING 2
+#define SOFT_DEBUGGER_BREAK_CAUSE_SW_BREAKPOINT 3
+#define SOFT_DEBUGGER_BREAK_CAUSE_USER_HALT 4
+#define SOFT_DEBUGGER_BREAK_CAUSE_IMAGE_LOAD 5
+#define SOFT_DEBUGGER_BREAK_CAUSE_IMAGE_UNLOAD 6
+#define SOFT_DEBUGGER_BREAK_CAUSE_SYSTEM_RESET 7
+#define SOFT_DEBUGGER_BREAK_CAUSE_EXCEPTION 8
+
+#define SOFT_DEBUGGER_SETTING_SMM_ENTRY_BREAK 1
+
+#endif
diff --git a/SourceLevelDebugPkg/Include/TransferProtocol.h b/SourceLevelDebugPkg/Include/TransferProtocol.h new file mode 100644 index 0000000000..b7e1143aa0 --- /dev/null +++ b/SourceLevelDebugPkg/Include/TransferProtocol.h @@ -0,0 +1,407 @@ +/** @file
+ Transfer protocol defintions used by debug agent and host. It is only
+ intended to be used by Debug related module implementation.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __TRANSFER_PROTOCOL_H__
+#define __TRANSFER_PROTOCOL_H__
+
+#include "ProcessorContext.h"
+#include "SoftDebuggerDefinitions.h"
+
+//
+// Definitions for break command.
+//
+#define DEBUG_STARTING_SYMBOL_BREAK (0x21) // '!'
+#define DEBUG_STARTING_SYMBOL_BREAK_STRING ("!")
+
+//
+// Definition for starting symbol of a normal debug packet. Choose a non-ASCII to avoid conflict with other serial output.
+//
+#define DEBUG_STARTING_SYMBOL_NORMAL (0xFE)
+
+
+#pragma pack(1)
+
+//
+// Definition for common header for normal debug packets (not including break command)
+//
+typedef struct {
+ UINT8 StartSymbol;
+ UINT8 Command;
+ UINT8 DataLength;
+} DEBUG_COMMAND_HEADER;
+
+//
+// Structure to facilitate debug packet header parsing or construction
+//
+typedef struct {
+ UINT8 Command;
+ UINT8 DataLength;
+} DEBUG_COMMAND_HEADER_NO_START_SYMBOL;
+
+
+//
+// Definition for Command field for debug packets
+//
+#define DEBUG_COMMAND_REQUEST (0 << 7)
+#define DEBUG_COMMAND_RESPONSE (1 << 7)
+
+
+
+#define DEBUG_COMMAND_RESET (DEBUG_COMMAND_REQUEST | 0) // 0
+
+#define DEBUG_COMMAND_GO (DEBUG_COMMAND_REQUEST | 1) // 1
+
+#define DEBUG_COMMAND_BREAK_CAUSE (DEBUG_COMMAND_REQUEST | 2) // 2
+
+#define DEBUG_COMMAND_SET_HW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 3) // 3
+#define DEBUG_COMMAND_CLEAR_HW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 4) // 4
+
+#define DEBUG_COMMAND_SINGLE_STEPPING (DEBUG_COMMAND_REQUEST | 5) // 5
+
+#define DEBUG_COMMAND_SET_SW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 6) // 6
+#define DEBUG_COMMAND_CLEAR_SW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 7) // 7
+
+#define DEBUG_COMMAND_READ_MEMORY_8 (DEBUG_COMMAND_REQUEST | 8) // 8
+#define DEBUG_COMMAND_READ_MEMORY_16 (DEBUG_COMMAND_REQUEST | 9) // 9
+#define DEBUG_COMMAND_READ_MEMORY_32 (DEBUG_COMMAND_REQUEST | 10) // 10
+#define DEBUG_COMMAND_READ_MEMORY_64 (DEBUG_COMMAND_REQUEST | 11) // 11
+
+#define DEBUG_COMMAND_WRITE_MEMORY_8 (DEBUG_COMMAND_REQUEST | 12) // 12
+#define DEBUG_COMMAND_WRITE_MEMORY_16 (DEBUG_COMMAND_REQUEST | 13) // 13
+#define DEBUG_COMMAND_WRITE_MEMORY_32 (DEBUG_COMMAND_REQUEST | 14) // 14
+#define DEBUG_COMMAND_WRITE_MEMORY_64 (DEBUG_COMMAND_REQUEST | 15) // 15
+
+#define DEBUG_COMMAND_READ_IO (DEBUG_COMMAND_REQUEST | 16) // 16
+#define DEBUG_COMMAND_WRITE_IO (DEBUG_COMMAND_REQUEST | 20) // 20
+
+#define DEBUG_COMMAND_READ_REGISTER (DEBUG_COMMAND_REQUEST | 24) // 24
+#define DEBUG_COMMAND_WRITE_REGISTER (DEBUG_COMMAND_REQUEST | 26) // 26
+
+#define DEBUG_COMMAND_STEP_OVER (DEBUG_COMMAND_REQUEST | 28) // 28
+#define DEBUG_COMMAND_STEP_OUT (DEBUG_COMMAND_REQUEST | 29) // 29
+#define DEBUG_COMMAND_STEP_BRANCH (DEBUG_COMMAND_REQUEST | 30) // 30
+
+#define DEBUG_COMMAND_ARCH_MODE (DEBUG_COMMAND_REQUEST | 34) // 34
+
+#define DEBUG_COMMAND_READ_MSR (DEBUG_COMMAND_REQUEST | 35) // 35
+#define DEBUG_COMMAND_WRITE_MSR (DEBUG_COMMAND_REQUEST | 36) // 36
+
+#define DEBUG_COMMAND_READ_REGISTER_GROUP (DEBUG_COMMAND_REQUEST | 37) // 37
+
+#define DEBUG_COMMAND_SET_DEBUG_FLAG (DEBUG_COMMAND_REQUEST | 38) // 38
+
+#define DEBUG_COMMAND_GET_REVISION (DEBUG_COMMAND_REQUEST | 39) // 30
+
+#define DEBUG_COMMAND_GET_EXCEPTION (DEBUG_COMMAND_REQUEST | 40) // 40
+
+#define DEBUG_COMMAND_SET_VIEWPOINT (DEBUG_COMMAND_REQUEST | 41) // 41
+
+#define DEBUG_COMMAND_GET_VIEWPOINT (DEBUG_COMMAND_REQUEST | 42) // 42
+
+//
+// The below are target side initiated commands.
+//
+#define DEBUG_COMMAND_INIT_BREAK (DEBUG_COMMAND_REQUEST | 63) // 63
+#define DEBUG_COMMAND_BREAK_POINT (DEBUG_COMMAND_REQUEST | 62) // 62
+#define DEBUG_COMMAND_MEMORY_READY (DEBUG_COMMAND_REQUEST | 61) // 61
+
+#define DEBUG_COMMAND_OK (DEBUG_COMMAND_RESPONSE | 0)
+#define DEBUG_COMMAND_RESEND (DEBUG_COMMAND_RESPONSE | 1)
+#define DEBUG_COMMAND_ABORT (DEBUG_COMMAND_RESPONSE | 2)
+
+//
+// The below 2 commands are used when transferring big data (like > ~250 bytes). The sequence is:
+// Host Macine Target Macine
+// Request =>
+// <= IN_PROGRESS with part of the data
+// CONTINUE =>
+// (could have multiple IN_PROGRESS and CONTINUE interactions)
+// <= OK with the last part of data
+// OK (no data as ACK) =>
+//
+#define DEBUG_COMMAND_IN_PROGRESS (DEBUG_COMMAND_RESPONSE | 3) // Used when trying to
+#define DEBUG_COMMAND_CONTINUE (DEBUG_COMMAND_RESPONSE | 4) // Used when trying to transfer big data (like > ~250 bytes)
+
+//
+// The below 2 commands are used to support deferred halt. HALT_DEFERRED will be returned when a halt request received while target is already in inter-active mode.
+// HALT_PROCESSED will be return as a possible return value for GO command, if target has a pending halt request.
+//
+#define DEBUG_COMMAND_HALT_DEFERRED (DEBUG_COMMAND_RESPONSE | 5)
+#define DEBUG_COMMAND_HALT_PROCESSED (DEBUG_COMMAND_RESPONSE | 6)
+
+#define DEBUG_COMMAND_NOT_SUPPORTED (DEBUG_COMMAND_RESPONSE | 15)
+
+//
+// Definition for data field for debug packets
+//
+#define DEBUG_DATA_MAXIMUM_LENGTH_FOR_SMALL_COMMANDS 20
+
+#define DEBUG_DATA_UPPER_LIMIT 0xff // This is the upper limit for the data size, by the limit of the packet header definition.
+
+#define DEBUG_DATA_MAXIMUM_REAL_DATA 0xf8
+
+#define DEBUG_DEFINITION_MAX_IO_LENGTH 4
+
+//
+// Response data for DEBUG_COMMAND_BREAK_CAUSE
+//
+typedef struct {
+ UINT8 Cause;
+ UINT64 StopAddress;
+} DEBUG_DATA_RESPONSE_BREAK_CAUSE;
+
+//
+// Break type defintions for DEBUG_DATA_BREAK_CAUSE
+//
+#define DEBUG_DATA_BREAK_CAUSE_UNKNOWN 0
+#define DEBUG_DATA_BREAK_CAUSE_HW_BREAKPOINT 1
+#define DEBUG_DATA_BREAK_CAUSE_STEPPING 2
+#define DEBUG_DATA_BREAK_CAUSE_SW_BREAKPOINT 3
+#define DEBUG_DATA_BREAK_CAUSE_USER_HALT 4
+#define DEBUG_DATA_BREAK_CAUSE_IMAGE_LOAD 5
+#define DEBUG_DATA_BREAK_CAUSE_IMAGE_UNLOAD 6
+#define DEBUG_DATA_BREAK_CAUSE_SYSTEM_RESET 7
+#define DEBUG_DATA_BREAK_CAUSE_EXCEPTION 8
+#define DEBUG_DATA_BREAK_CAUSE_MEMORY_READY 9
+
+//
+// Response data for DEBUG_COMMAND_ARCH_MODE, defined as SOFT_DEBUGGER_PROCESSOR_...
+//
+typedef struct {
+ UINT8 CpuMode;
+} DEBUG_DATA_RESPONSE_ARCH_MODE;
+
+//
+// Cpu architecture defintions for DEBUG_DATA_RESPONSE_ARCH_MODE
+//
+#define DEBUG_DATA_BREAK_CPU_ARCH_IA16 0
+#define DEBUG_DATA_BREAK_CPU_ARCH_IA32 1
+#define DEBUG_DATA_BREAK_CPU_ARCH_X64 2
+
+//
+// Command and response data for DEBUG_COMMAND_XX_YY_BREAKPOINT
+//
+typedef struct {
+ UINT8 Length:2; // Refer to below DEBUG_DATA_BREAKPOINT_LENGTH_XX macros
+ UINT8 Access:2; // Refer to below DEBUG_DATA_BREAKPOINT_ACCESS_XX macros
+ UINT8 Index:2; // Index of debug register
+ UINT8 Reserved:2;
+} DEBUG_DATA_BREAKPOINT_TYPE;
+
+#define DEBUG_DATA_BREAKPOINT_MEMORY_ACCESS (0x11)
+#define DEBUG_DATA_BREAKPOINT_IO_ACCESS (0x10)
+#define DEBUG_DATA_BREAKPOINT_MEMORY_WRITE (0x01)
+#define DEBUG_DATA_BREAKPOINT_MEMORY_EXECUTE (0x00)
+
+#define DEBUG_DATA_BREAKPOINT_LENGTH_64 (0x11)
+#define DEBUG_DATA_BREAKPOINT_LENGTH_32 (0x10)
+#define DEBUG_DATA_BREAKPOINT_LENGTH_16 (0x01)
+#define DEBUG_DATA_BREAKPOINT_LENGTH_8 (0x00)
+
+//
+// Command data for DEBUG_COMMAND_SET_HW_BREAKPOINT
+//
+typedef struct {
+ DEBUG_DATA_BREAKPOINT_TYPE Type;
+ UINT64 Address;
+} DEBUG_DATA_SET_HW_BREAKPOINT;
+
+//
+// Command data for DEBUG_COMMAND_CLEAR_HW_BREAKPOINT
+//
+typedef struct {
+ UINT8 IndexMask; // 0x0f will clear all hw breakpoints
+} DEBUG_DATA_CLEAR_HW_BREAKPOINT;
+
+//
+// Command data for DEBUG_COMMAND_SET_SW_BREAKPOINT
+//
+typedef struct {
+ UINT64 Address;
+} DEBUG_DATA_SET_SW_BREAKPOINT;
+
+//
+// Response data for DEBUG_COMMAND_SET_SW_BREAKPOINT
+//
+typedef struct {
+ UINT8 OriginalData;
+} DEBUG_DATA_RESPONSE_SET_SW_BREAKPOINT;
+
+//
+// Command data for DEBUG_COMMAND_CLEAR_SW_BREAKPOINT
+//
+typedef DEBUG_DATA_SET_SW_BREAKPOINT DEBUG_DATA_CLEAR_SW_BREAKPOINT;
+
+//
+// Command data for DEBUG_COMMAND_READ_MEMORY_XX
+//
+typedef struct {
+ UINT64 Address;
+ UINT16 Count;
+} DEBUG_DATA_READ_MEMORY_8;
+
+typedef DEBUG_DATA_READ_MEMORY_8 DEBUG_DATA_READ_MEMORY_16;
+
+typedef DEBUG_DATA_READ_MEMORY_8 DEBUG_DATA_READ_MEMORY_32;
+
+typedef DEBUG_DATA_READ_MEMORY_8 DEBUG_DATA_READ_MEMORY_64;
+
+//
+// Command data for DEBUG_COMMAND_WRITE_MEMORY_XX
+//
+typedef struct {
+ UINT64 Address;
+ UINT16 Count;
+ UINT8 Data; // The actual length for this field is decided by Width x Count
+} DEBUG_DATA_WRITE_MEMORY_8;
+
+typedef DEBUG_DATA_WRITE_MEMORY_8 DEBUG_DATA_WRITE_MEMORY_16;
+
+typedef DEBUG_DATA_WRITE_MEMORY_8 DEBUG_DATA_WRITE_MEMORY_32;
+
+typedef DEBUG_DATA_WRITE_MEMORY_8 DEBUG_DATA_WRITE_MEMORY_64;
+
+//
+// Command data for DEBUG_COMMAND_READ_IO
+//
+typedef struct {
+ UINT16 Port;
+ UINT8 Width;
+} DEBUG_DATA_READ_IO;
+
+//
+// Response data for DEBUG_COMMAND_READ_IO
+//
+typedef struct {
+ UINT8 Data; // The actual length of this structure will be adjusted according to the Width field
+} DEBUG_DATA_RESPONSE_READ_IO;
+
+//
+// Command data for DEBUG_COMMAND_WRITE_IO
+//
+typedef struct {
+ UINT16 Port;
+ UINT8 Width;
+ UINT8 Data; // The actual length of this structure will be adjusted according to the Width field
+} DEBUG_DATA_WRITE_IO;
+
+//
+// Command data for DEBUG_COMMAND_READ_REGISTER
+//
+typedef struct {
+ UINT8 Index; // defined as DEBUG_DEFINITION_REGISTER_XX
+ UINT8 Offset:4;
+ UINT8 Length:4;
+} DEBUG_DATA_READ_REGISTER;
+
+//
+// Command data for DEBUG_COMMAND_WRITE_REGISTER
+//
+typedef struct {
+ UINT8 Index; // defined as DEBUG_DEFINITION_REGISTER_XX
+ UINT8 Offset:4;
+ UINT8 Length:4;
+ UINT64 Value;
+} DEBUG_DATA_WRITE_REGISTER;
+
+//
+// Command data for DEBUG_COMMAND_READ_MSR
+//
+typedef struct {
+ UINT32 Index;
+} DEBUG_DATA_READ_MSR;
+
+//
+// Response data for DEBUG_COMMAND_READ_MSR
+//
+typedef struct {
+ UINT64 Value;
+} DEBUG_DATA_RESPONSE_READ_MSR;
+
+//
+// Command data for DEBUG_COMMAND_WRITE_MSR
+//
+typedef struct {
+ UINT32 Index;
+ UINT64 Value;
+} DEBUG_DATA_WRITE_MSR;
+
+//
+// Command data for DEBUG_COMMAND_READ_REGISTER_GROUP
+//
+typedef struct {
+ // For possible values, refer to the definition for DEBUG_DEFINITION_REGISTER_GROUP_XXX (in another .h file as it is architecture specific)
+ UINT8 Index;
+} DEBUG_DATA_READ_REGISTER_GROUP;
+
+//
+// Response data for DEBUG_COMMAND_GET_REVISION
+//
+typedef struct {
+ UINT32 Revision;
+ UINT32 Capabilities;
+} DEBUG_DATA_RESPONSE_GET_REVISION;
+
+//
+// Response data for DEBUG_COMMAND_GET_EXCEPTION
+//
+typedef struct {
+ UINT8 ExceptionNum;
+ UINT64 ExceptionData;
+} DEBUG_DATA_RESPONSE_GET_EXCEPTION;
+
+typedef struct {
+ UINT8 DRn; // The index of DR register which to be used as temporary breakpoint
+} DEBUG_DATA_STEP_OVER;
+
+//
+// Command data for DEBUG_COMMAND_SET_DEBUG_FLAG
+//
+typedef struct {
+ UINT32 DebugFlag; // The index of DR register which to be used as temporary breakpoint
+} DEBUG_DATA_SET_DEBUG_FLAG;
+
+//
+// Command data for DEBUG_COMMAND_SET_VIEWPOINT
+// If viewpoint is changed successfully, DEBUG_COMMAND_OK will be returned.
+// If viewpoint is not availabe, DEBUG_COMMAND_NOT_SUPPORTED will be returned.
+//
+typedef struct {
+ UINT32 ViewPoint; // The index of viewpoint will be set
+} DEBUG_DATA_SET_VIEWPOINT;
+
+//
+// Response data for DEBUG_COMMAND_GET_VIEWPOINT
+//
+typedef struct {
+ UINT32 ViewPoint; // The index of viewpoint will be returned
+} DEBUG_DATA_RESPONSE_GET_VIEWPOINT;
+
+#pragma pack()
+
+#define DEBUG_PACKET_CONSTRUCTOR_WITH_NO_DATA(DebugPacket,ShortCommandType) \
+ ((DEBUG_COMMAND_HEADER *)DebugPacket)->StartSymbol = DEBUG_STARTING_SYMBOL_NORMAL; \
+ ((DEBUG_COMMAND_HEADER *)DebugPacket)->Command = DEBUG_COMMAND_##ShortCommandType; \
+ ((DEBUG_COMMAND_HEADER *)DebugPacket)->DataLength = 0;
+
+#define DEBUG_PACKET_CONSTRUCTOR_WITH_DATA(DebugPacket,ShortCommandType, DebugPacketDataPointer, PacketLength) \
+ ((DEBUG_COMMAND_HEADER *)DebugPacket)->StartSymbol = DEBUG_STARTING_SYMBOL_NORMAL; \
+ ((DEBUG_COMMAND_HEADER *)DebugPacket)->Command = DEBUG_COMMAND_##ShortCommandType; \
+ ((DEBUG_COMMAND_HEADER *)DebugPacket)->DataLength = sizeof (DEBUG_DATA_##ShortCommandType); \
+ *DebugPacketDataPointer = (DEBUG_DATA_##ShortCommandType *)((DEBUG_COMMAND_HEADER *)DebugPacket+1); \
+ *PacketLength = sizeof (DEBUG_COMMAND_HEADER) + sizeof (DEBUG_DATA_##ShortCommandType);
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugAgent.c b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugAgent.c new file mode 100644 index 0000000000..39b24c39c6 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugAgent.c @@ -0,0 +1,1195 @@ +/** @file
+ Commond Debug Agent library implementition. It mainly includes
+ the first C function called by exception/interrupt handlers,
+ read/write debug packet to communication with HOST based on transfer
+ protocol.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugAgent.h"
+#include "Ia32/DebugException.h"
+
+/**
+ Check if HOST is connected based on Mailbox.
+
+ @retval TRUE HOST is connected.
+ @retval FALSE HOST is not connected.
+
+**/
+BOOLEAN
+IsHostConnected (
+ VOID
+ )
+{
+ DEBUG_AGENT_MAILBOX *Mailbox;
+
+ Mailbox = GetMailboxPointer ();
+
+ if (Mailbox->DebugFlag.Bits.HostPresent == 1) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Set HOST connect flag in Mailbox.
+
+**/
+VOID
+SetHostConnectedFlag (
+ VOID
+ )
+{
+ DEBUG_AGENT_MAILBOX *Mailbox;
+
+ Mailbox = GetMailboxPointer ();
+
+ Mailbox->DebugFlag.Bits.HostPresent = 1;
+}
+
+/**
+ Set debug flag of Debug Agent in Mailbox.
+
+ @param DebugFlag Debug Flag defined by transfer protocol.
+
+**/
+VOID
+SetDebugFlag (
+ IN UINT32 DebugFlag
+ )
+{
+ DEBUG_AGENT_MAILBOX *Mailbox;
+
+ Mailbox = GetMailboxPointer ();
+
+ if ((DebugFlag & SOFT_DEBUGGER_SETTING_SMM_ENTRY_BREAK) != 0) {
+ Mailbox->DebugFlag.Bits.BreakOnNextSmi = 1;
+ } else {
+ Mailbox->DebugFlag.Bits.BreakOnNextSmi = 0;
+ }
+}
+
+/**
+ Exectue GO command.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+
+**/
+VOID
+CommandGo (
+ IN DEBUG_CPU_CONTEXT *CpuContext
+ )
+{
+ IA32_EFLAGS32 *Eflags;
+
+ Eflags = (IA32_EFLAGS32 *) &CpuContext->Eflags;
+ Eflags->Bits.TF = 0;
+ Eflags->Bits.RF = 1;
+}
+
+/**
+ Exectue Stepping command.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+
+**/
+VOID
+CommandStepping (
+ IN DEBUG_CPU_CONTEXT *CpuContext
+ )
+{
+ IA32_EFLAGS32 *Eflags;
+
+ Eflags = (IA32_EFLAGS32 *) &CpuContext->Eflags;
+ Eflags->Bits.TF = 1;
+ Eflags->Bits.RF = 1;
+}
+
+/**
+ Set debug register for hardware breakpoint.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] SetHwBreakpoint Hardware breakpoint to be set.
+
+**/
+VOID
+SetDebugRegister (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_SET_HW_BREAKPOINT *SetHwBreakpoint
+ )
+{
+ UINT8 RegisterIndex;
+ UINTN Dr7Value;
+
+ RegisterIndex = SetHwBreakpoint->Type.Index;
+
+ //
+ // Set debug address
+ //
+ * ((UINTN *) &CpuContext->Dr0 + RegisterIndex) = (UINTN) SetHwBreakpoint->Address;
+
+ Dr7Value = CpuContext->Dr7;
+
+ //
+ // Enable Gx, Lx
+ //
+ Dr7Value |= 0x3 << (RegisterIndex * 2);
+ //
+ // Set RWx and Lenx
+ //
+ Dr7Value &= ~(0xf0000 << (RegisterIndex * 4));
+ Dr7Value |= (SetHwBreakpoint->Type.Length | SetHwBreakpoint->Type.Access) << (RegisterIndex * 4);
+ //
+ // Enable GE, LE
+ //
+ Dr7Value |= 0x300;
+
+ CpuContext->Dr7 = Dr7Value;
+}
+
+/**
+ Clear debug register for hardware breakpoint.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] ClearHwBreakpoint Hardware breakpoint to be cleared.
+
+**/
+VOID
+ClearDebugRegister (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_CLEAR_HW_BREAKPOINT *ClearHwBreakpoint
+ )
+{
+ if ((ClearHwBreakpoint->IndexMask & BIT0) != 0) {
+ CpuContext->Dr0 = 0;
+ CpuContext->Dr7 &= ~(0x3 << 0);
+ }
+ if ((ClearHwBreakpoint->IndexMask & BIT1) != 0) {
+ CpuContext->Dr1 = 0;
+ CpuContext->Dr7 &= ~(0x3 << 2);
+ }
+ if ((ClearHwBreakpoint->IndexMask & BIT2) != 0) {
+ CpuContext->Dr2 = 0;
+ CpuContext->Dr7 &= ~(0x3 << 4);
+ }
+ if ((ClearHwBreakpoint->IndexMask & BIT3) != 0) {
+ CpuContext->Dr3 = 0;
+ CpuContext->Dr7 &= ~(0x3 << 6);
+ }
+}
+
+/**
+ Send acknowledge packet to HOST.
+
+ @param[in] AckCommand Type of Acknowledge packet.
+
+**/
+VOID
+SendAckPacket (
+ IN UINT8 AckCommand
+ )
+{
+ DEBUG_COMMAND_HEADER DebugCommonHeader;
+ DEBUG_PORT_HANDLE Handle;
+
+ Handle = GetDebugPortHandle();
+
+ DebugCommonHeader.StartSymbol = DEBUG_STARTING_SYMBOL_NORMAL;
+ DebugCommonHeader.Command = AckCommand;
+ DebugCommonHeader.DataLength = 0;
+
+ DebugPortWriteBuffer (Handle, (UINT8 *) &DebugCommonHeader, sizeof (DEBUG_COMMAND_HEADER));
+}
+
+/**
+ Receive acknowledge packet from HOST in specified time.
+
+ @param[out] Ack Returned acknowlege type from HOST.
+ @param[in] Timeout Time out value to wait for acknowlege from HOST.
+ The unit is microsecond.
+ @param[out] BreakReceived If BreakReceived is not NULL,
+ TRUE is retured if break-in symbol received.
+ FALSE is retured if break-in symbol not received.
+
+ @retval RETRUEN_SUCCESS Succeed to receive acknowlege packet from HOST,
+ the type of acknowlege packet saved in Ack.
+ @retval RETURN_TIMEOUT Specified timeout value was up.
+
+**/
+RETURN_STATUS
+ReceiveAckPacket (
+ OUT UINT8 *Ack,
+ IN UINTN Timeout,
+ OUT BOOLEAN *BreakReceived OPTIONAL
+ )
+{
+ DEBUG_COMMAND_HEADER DebugCommonHeader;
+ DEBUG_PORT_HANDLE Handle;
+
+ Handle = GetDebugPortHandle();
+
+ while (TRUE) {
+ if (DebugPortReadBuffer (Handle, (UINT8 *) &DebugCommonHeader.StartSymbol, 1, Timeout) == 0) {
+ return RETURN_TIMEOUT;
+ }
+ if (DebugCommonHeader.StartSymbol == DEBUG_STARTING_SYMBOL_BREAK) {
+ if (BreakReceived != NULL) {
+ SendAckPacket (DEBUG_COMMAND_HALT_DEFERRED);
+ *BreakReceived = TRUE;
+ }
+ }
+ if (DebugCommonHeader.StartSymbol == DEBUG_STARTING_SYMBOL_NORMAL) {
+ break;
+ }
+ }
+ if (DebugPortReadBuffer (Handle, (UINT8 *)&DebugCommonHeader.Command, sizeof (DEBUG_COMMAND_HEADER) - 1, Timeout) == 0) {
+ return RETURN_TIMEOUT;
+ }
+
+ *Ack = DebugCommonHeader.Command;
+ return RETURN_SUCCESS;
+}
+
+/**
+ Receive acknowledge packet OK from HOST in specified time.
+
+ @param[in] Timeout Time out value to wait for acknowlege from HOST.
+ The unit is microsecond.
+ @param[out] BreakReceived If BreakReceived is not NULL,
+ TRUE is retured if break-in symbol received.
+ FALSE is retured if break-in symbol not received.
+
+ @retval RETRUEN_SUCCESS Succeed to receive acknowlege packet from HOST,
+ the type of acknowlege packet saved in Ack.
+ @retval RETURN_TIMEOUT Specified timeout value was up.
+
+**/
+RETURN_STATUS
+WaitForAckPacketOK (
+ IN UINTN Timeout,
+ OUT BOOLEAN *BreakReceived OPTIONAL
+ )
+{
+ RETURN_STATUS Status;
+ UINT8 Ack;
+
+ while (TRUE) {
+ Status = ReceiveAckPacket (&Ack, Timeout, BreakReceived);
+ if ((Status == RETURN_SUCCESS && Ack == DEBUG_COMMAND_OK) ||
+ Status == RETURN_TIMEOUT) {
+ break;
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Receive valid packet from HOST.
+
+ @param[out] InputPacket Buffer to receive packet.
+ @param[out] BreakReceived TRUE means break-in symbol received.
+ FALSE means break-in symbol not received.
+
+ @retval RETURN_SUCCESS A valid package was reveived in InputPacket.
+ @retval RETURN_NOT_READY No valid start symbol received.
+ @retval RETURN_TIMEOUT Timeout occurs.
+
+**/
+RETURN_STATUS
+ReceivePacket (
+ OUT UINT8 *InputPacket,
+ OUT BOOLEAN *BreakReceived
+ )
+{
+ DEBUG_COMMAND_HEADER *DebugHeader;
+ UINTN Received;
+ DEBUG_PORT_HANDLE Handle;
+
+ Handle = GetDebugPortHandle();
+ //
+ // Find the valid start symbol
+ //
+ DebugPortReadBuffer (Handle, InputPacket, 1, 0);
+
+ if (*InputPacket == DEBUG_STARTING_SYMBOL_BREAK) {
+ *BreakReceived = TRUE;
+ SendAckPacket (DEBUG_COMMAND_HALT_DEFERRED);
+ }
+
+ if (*InputPacket != DEBUG_STARTING_SYMBOL_NORMAL) {
+ return RETURN_NOT_READY;
+ }
+
+ //
+ // Read Package header
+ //
+ Received = DebugPortReadBuffer (Handle, InputPacket + 1, sizeof(DEBUG_COMMAND_HEADER_NO_START_SYMBOL), 0);
+ if (Received == 0) {
+ return RETURN_TIMEOUT;
+ }
+
+ DebugHeader = (DEBUG_COMMAND_HEADER *) InputPacket;
+ //
+ // Read the payload if has
+ //
+ if (DebugHeader->DataLength > 0 && DebugHeader->DataLength < (DEBUG_DATA_MAXIMUM_REAL_DATA - sizeof(DEBUG_COMMAND_HEADER))) {
+ InputPacket = InputPacket + 1 + Received;
+ Received = DebugPortReadBuffer (Handle, InputPacket, DebugHeader->DataLength, 0);
+
+ if (Received == 0) {
+ return RETURN_TIMEOUT;
+ }
+ }
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Get current break cause.
+
+ @param[in] Vector Vector value of exception or interrupt.
+ @param[in] CpuContext Pointer to save CPU context.
+
+ @return The type of break cause defined by XXXX
+
+**/
+UINT8
+GetBreakCause (
+ IN UINTN Vector,
+ IN DEBUG_CPU_CONTEXT *CpuContext
+ )
+{
+ UINT8 Cause;
+
+ Cause = DEBUG_DATA_BREAK_CAUSE_UNKNOWN;
+
+ switch (Vector) {
+ case DEBUG_INT1_VECTOR:
+ case DEBUG_INT3_VECTOR:
+
+ if (Vector == DEBUG_INT1_VECTOR) {
+ //
+ // INT 1
+ //
+ if ((CpuContext->Dr6 & BIT14) != 0) {
+ Cause = DEBUG_DATA_BREAK_CAUSE_STEPPING;
+
+ } else {
+ Cause = DEBUG_DATA_BREAK_CAUSE_HW_BREAKPOINT;
+ }
+ } else {
+ //
+ // INT 3
+ //
+ Cause = DEBUG_DATA_BREAK_CAUSE_SW_BREAKPOINT;
+ }
+
+ switch (CpuContext->Dr0) {
+ case IMAGE_LOAD_SIGNATURE:
+ case IMAGE_UNLOAD_SIGNATURE:
+
+ if (CpuContext->Dr3 == IO_PORT_BREAKPOINT_ADDRESS) {
+
+ Cause = (UINT8) ((CpuContext->Dr0 == IMAGE_LOAD_SIGNATURE) ?
+ DEBUG_DATA_BREAK_CAUSE_IMAGE_LOAD : DEBUG_DATA_BREAK_CAUSE_IMAGE_UNLOAD);
+ }
+ break;
+
+ case SOFT_INTERRUPT_SIGNATURE:
+
+ if (CpuContext->Dr1 == MEMORY_READY_SIGNATURE) {
+ Cause = DEBUG_DATA_BREAK_CAUSE_MEMORY_READY;
+ CpuContext->Dr0 = 0;
+ } else if (CpuContext->Dr1 == SYSTEM_RESET_SIGNATURE) {
+ Cause = DEBUG_DATA_BREAK_CAUSE_SYSTEM_RESET;
+ CpuContext->Dr0 = 0;
+ }
+ break;
+
+ default:
+ break;
+
+ }
+
+ break;
+
+ case DEBUG_TIMER_VECTOR:
+ Cause = DEBUG_DATA_BREAK_CAUSE_USER_HALT;
+ break;
+
+ default:
+ if (Vector < 20) {
+ Cause = DEBUG_DATA_BREAK_CAUSE_EXCEPTION;
+ }
+ break;
+ }
+
+ return Cause;
+}
+
+/**
+ Send packet with response data to HOST.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Data Pointer to response data buffer.
+ @param[in] DataSize Size of response data in byte.
+
+ @retval RETURN_SUCCESS Response data was sent successfully.
+ @retval RETURN_DEVICE_ERROR Cannot receive DEBUG_COMMAND_OK from HOST.
+
+**/
+RETURN_STATUS
+SendDataResponsePacket (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 *Data,
+ IN UINT16 DataSize
+ )
+{
+ UINT8 PacketHeader[DEBUG_DATA_MAXIMUM_LENGTH_FOR_SMALL_COMMANDS];
+ BOOLEAN LastPacket;
+ UINT8 Ack;
+ UINT8 PacketData[DEBUG_DATA_MAXIMUM_REAL_DATA];
+ DEBUG_PORT_HANDLE Handle;
+
+ Handle = GetDebugPortHandle();
+
+ ((DEBUG_COMMAND_HEADER *)PacketHeader)->StartSymbol = DEBUG_STARTING_SYMBOL_NORMAL;
+
+ while (TRUE) {
+ if (DataSize <= DEBUG_DATA_MAXIMUM_REAL_DATA) {
+ LastPacket = TRUE;
+ ((DEBUG_COMMAND_HEADER *)PacketHeader)->Command = DEBUG_COMMAND_OK;
+ ((DEBUG_COMMAND_HEADER *)PacketHeader)->DataLength = (UINT8) DataSize;
+ CopyMem (PacketData, Data, DataSize);
+
+ } else {
+ LastPacket = FALSE;
+ ((DEBUG_COMMAND_HEADER *)PacketHeader)->Command = DEBUG_COMMAND_IN_PROGRESS;
+ ((DEBUG_COMMAND_HEADER *)PacketHeader)->DataLength = DEBUG_DATA_MAXIMUM_REAL_DATA;
+ CopyMem (PacketData, Data, DEBUG_DATA_MAXIMUM_REAL_DATA);
+ }
+
+ DebugPortWriteBuffer (Handle, PacketHeader, sizeof (DEBUG_COMMAND_HEADER));
+ DebugPortWriteBuffer (Handle, PacketData, ((DEBUG_COMMAND_HEADER *)PacketHeader)->DataLength);
+
+ ReceiveAckPacket(&Ack, 0, NULL);
+ switch (Ack) {
+ case DEBUG_COMMAND_RESEND:
+ //
+ // Send the packet again
+ //
+ break;
+
+ case DEBUG_COMMAND_CONTINUE:
+ //
+ // Send the rest packet
+ //
+ Data += DEBUG_DATA_MAXIMUM_REAL_DATA;
+ DataSize -= DEBUG_DATA_MAXIMUM_REAL_DATA;
+ break;
+
+ case DEBUG_COMMAND_OK:
+ if (LastPacket) {
+ //
+ // If this is the last packet, return RETURN_SUCCESS.
+ //
+ return RETURN_SUCCESS;
+ } else {
+ return RETURN_DEVICE_ERROR;
+ }
+
+ default:
+ return RETURN_DEVICE_ERROR;
+
+ }
+ }
+}
+
+/**
+ Send break cause packet to HOST.
+
+ @param[in] Vector Vector value of exception or interrutp.
+ @param[in] CpuContext Pointer to save CPU context.
+
+ @retval RETURN_SUCCESS Response data was sent successfully.
+ @retval RETURN_DEVICE_ERROR Cannot receive DEBUG_COMMAND_OK from HOST.
+
+**/
+RETURN_STATUS
+SendBreakCausePacket (
+ IN UINTN Vector,
+ IN DEBUG_CPU_CONTEXT *CpuContext
+ )
+{
+ DEBUG_DATA_RESPONSE_BREAK_CAUSE DebugDataBreakCause;
+
+ DebugDataBreakCause.StopAddress = CpuContext->Eip;
+ DebugDataBreakCause.Cause = GetBreakCause (Vector, CpuContext);
+
+ return SendDataResponsePacket (CpuContext, (UINT8 *) &DebugDataBreakCause, (UINT16) sizeof (DEBUG_DATA_RESPONSE_BREAK_CAUSE));
+}
+
+
+/**
+ The main function to process communication with HOST.
+
+ It received the command packet from HOST, and sent response data packet to HOST.
+
+ @param[in] Vector Vector value of exception or interrutp.
+ @param[in, out] CpuContext Pointer to saved CPU context.
+ @param[in] BreakReceived TRUE means break-in symbol received.
+ FALSE means break-in symbol not received.
+
+**/
+VOID
+CommandCommunication (
+ IN UINTN Vector,
+ IN OUT DEBUG_CPU_CONTEXT *CpuContext,
+ IN BOOLEAN BreakReceived
+ )
+{
+ RETURN_STATUS Status;
+ UINT8 InputPacketBuffer[DEBUG_DATA_MAXIMUM_LENGTH_FOR_SMALL_COMMANDS];
+ DEBUG_COMMAND_HEADER *DebugHeader;
+ UINT8 Data8;
+ UINT32 Data32;
+ UINT64 Data64;
+ UINTN DataN;
+ DEBUG_DATA_READ_MEMORY_8 *MemoryRead;
+ DEBUG_DATA_WRITE_MEMORY_8 *MemoryWrite;
+ DEBUG_DATA_READ_IO *IoRead;
+ DEBUG_DATA_WRITE_IO *IoWrite;
+ DEBUG_DATA_READ_REGISTER *RegisterRead;
+ DEBUG_DATA_WRITE_REGISTER *RegisterWrite;
+ UINT8 *RegisterBuffer;
+ DEBUG_DATA_READ_MSR *MsrRegisterRead;
+ DEBUG_DATA_WRITE_MSR *MsrRegisterWrite;
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM RegisterGroupSegLim;
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE RegisterGroupSegBase;
+ DEBUG_DATA_RESPONSE_GET_REVISION DebugAgentRevision;
+ BOOLEAN HaltDeferred;
+ DEBUG_DATA_RESPONSE_GET_EXCEPTION Exception;
+ UINT32 ProcessorIndex;
+ DEBUG_PORT_HANDLE Handle;
+
+ Handle = GetDebugPortHandle();
+
+ ProcessorIndex = 0;
+ HaltDeferred = BreakReceived;
+
+ if (MultiProcessorDebugSupport) {
+ ProcessorIndex = GetProcessorIndex ();
+ SetCpuStopFlagByIndex (ProcessorIndex, TRUE);
+ }
+
+ while (TRUE) {
+
+ if (MultiProcessorDebugSupport) {
+ if (mDebugMpContext.ViewPointIndex != ProcessorIndex) {
+ if (mDebugMpContext.RunCommandSet) {
+ SetCpuStopFlagByIndex (ProcessorIndex, FALSE);
+ CommandGo (CpuContext);
+ break;
+ } else {
+ continue;
+ }
+ }
+ }
+
+ AcquireDebugPortControl ();
+
+ Status = ReceivePacket (InputPacketBuffer, &BreakReceived);
+
+ if (BreakReceived) {
+ HaltDeferred = TRUE;
+ BreakReceived = FALSE;
+ }
+
+ if (Status != RETURN_SUCCESS) {
+ ReleaseDebugPortControl ();
+ continue;
+ }
+
+ Data8 = 1;
+
+ DebugHeader =(DEBUG_COMMAND_HEADER *) InputPacketBuffer;
+ switch (DebugHeader->Command) {
+
+ case DEBUG_COMMAND_RESET:
+ SendAckPacket (DEBUG_COMMAND_OK);
+ ReleaseDebugPortControl ();
+
+ ResetCold ();
+ //
+ // Wait for reset
+ //
+ CpuDeadLoop ();
+ break;
+
+ case DEBUG_COMMAND_GO:
+ CommandGo (CpuContext);
+ if (!HaltDeferred) {
+ //
+ // If no HALT command received when being in-active mode
+ //
+ if (MultiProcessorDebugSupport) {
+ Data32 = FindCpuNotRunning ();
+ if (Data32 != -1) {
+ //
+ // If there are still others processors being in break state,
+ // send OK packet to HOST to finish this go command
+ //
+ SendAckPacket (DEBUG_COMMAND_OK);
+ CpuPause ();
+ //
+ // Set current view to the next breaking processor
+ //
+ mDebugMpContext.ViewPointIndex = Data32;
+ mDebugMpContext.BreakAtCpuIndex = mDebugMpContext.ViewPointIndex;
+ SetCpuBreakFlagByIndex (mDebugMpContext.ViewPointIndex, FALSE);
+ //
+ // Send break packet to HOST and exit to wait for command packet from HOST.
+ //
+ SendAckPacket (DEBUG_COMMAND_BREAK_POINT);
+ WaitForAckPacketOK (0, &BreakReceived);
+ ReleaseDebugPortControl ();
+ break;
+ }
+
+ //
+ // If no else processor break, set stop bitmask,
+ // and set Running flag for all processors.
+ //
+ SetCpuStopFlagByIndex (ProcessorIndex, FALSE);
+ SetCpuRunningFlag (TRUE);
+ CpuPause ();
+ //
+ // Wait for all processors are in running state
+ //
+ while (TRUE) {
+ if (IsAllCpuRunning ()) {
+ break;
+ }
+ }
+ //
+ // Set BSP to be current view point.
+ //
+ SetDebugViewPoint (mDebugMpContext.BspIndex);
+ CpuPause ();
+ //
+ // Clear breaking processor index and running flag
+ //
+ mDebugMpContext.BreakAtCpuIndex = (UINT32) (-1);
+ SetCpuRunningFlag (FALSE);
+ }
+
+ //
+ // Send OK packet to HOST to finish this go command
+ //
+ SendAckPacket (DEBUG_COMMAND_OK);
+
+ ReleaseDebugPortControl ();
+
+ return;
+
+ } else {
+ //
+ // If reveived HALT command, need to defer the GO command
+ //
+ SendAckPacket (DEBUG_COMMAND_HALT_PROCESSED);
+ HaltDeferred = FALSE;
+ Data8 = GetBreakCause (Vector, CpuContext);
+ if (Data8 == DEBUG_DATA_BREAK_CAUSE_IMAGE_LOAD || Data8 == DEBUG_DATA_BREAK_CAUSE_IMAGE_UNLOAD) {
+ CpuContext->Dr0 = 0;
+ CpuContext->Dr3 = 0;
+ }
+
+ Vector = DEBUG_TIMER_VECTOR;
+ }
+ break;
+
+ case DEBUG_COMMAND_BREAK_CAUSE:
+
+ if (MultiProcessorDebugSupport && ProcessorIndex != mDebugMpContext.BreakAtCpuIndex) {
+ Status = SendBreakCausePacket (DEBUG_TIMER_VECTOR, CpuContext);
+
+ } else {
+ Status = SendBreakCausePacket (Vector, CpuContext);
+ }
+
+ break;
+
+ case DEBUG_COMMAND_SET_HW_BREAKPOINT:
+ SetDebugRegister (CpuContext, (DEBUG_DATA_SET_HW_BREAKPOINT *) (DebugHeader + 1));
+ SendAckPacket (DEBUG_COMMAND_OK);
+ break;
+
+ case DEBUG_COMMAND_CLEAR_HW_BREAKPOINT:
+ ClearDebugRegister (CpuContext, (DEBUG_DATA_CLEAR_HW_BREAKPOINT *) (DebugHeader + 1));
+ SendAckPacket (DEBUG_COMMAND_OK);
+ break;
+
+ case DEBUG_COMMAND_SINGLE_STEPPING:
+ CommandStepping (CpuContext);
+
+ mDebugMpContext.BreakAtCpuIndex = (UINT32) (-1);
+
+ ReleaseDebugPortControl ();
+ //
+ // Executing stepping command directly without sending ACK packet.
+ //
+ return;
+
+ case DEBUG_COMMAND_SET_SW_BREAKPOINT:
+ Data64 = (UINTN) (((DEBUG_DATA_SET_SW_BREAKPOINT *) (DebugHeader + 1))->Address);
+ Data8 = *(UINT8 *) (UINTN) Data64;
+ *(UINT8 *) (UINTN) Data64 = DEBUG_SW_BREAKPOINT_SYMBOL;
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &Data8, (UINT16) sizeof (UINT8));
+ break;
+
+ case DEBUG_COMMAND_READ_MEMORY_64:
+ Data8 *= 2;
+ case DEBUG_COMMAND_READ_MEMORY_32:
+ Data8 *= 2;
+ case DEBUG_COMMAND_READ_MEMORY_16:
+ Data8 *= 2;
+ case DEBUG_COMMAND_READ_MEMORY_8:
+ MemoryRead = (DEBUG_DATA_READ_MEMORY_8 *) (DebugHeader + 1);
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) (UINTN) MemoryRead->Address, (UINT16) (MemoryRead->Count * Data8));
+ break;
+
+ case DEBUG_COMMAND_WRITE_MEMORY_64:
+ Data8 *= 2;
+ case DEBUG_COMMAND_WRITE_MEMORY_32:
+ Data8 *= 2;
+ case DEBUG_COMMAND_WRITE_MEMORY_16:
+ Data8 *= 2;
+ case DEBUG_COMMAND_WRITE_MEMORY_8:
+ MemoryWrite = (DEBUG_DATA_WRITE_MEMORY_8 *) (DebugHeader + 1);
+ CopyMem ((VOID *) (UINTN) MemoryWrite->Address, &MemoryWrite->Data, MemoryWrite->Count * Data8);
+ SendAckPacket (DEBUG_COMMAND_OK);
+ break;
+
+ case DEBUG_COMMAND_READ_IO:
+ IoRead = (DEBUG_DATA_READ_IO *) (DebugHeader + 1);
+ switch (IoRead->Width) {
+ case 1:
+ Data64 = IoRead8 (IoRead->Port);
+ break;
+ case 2:
+ Data64 = IoRead16 (IoRead->Port);
+ break;
+ case 4:
+ Data64 = IoRead32 (IoRead->Port);
+ break;
+ case 8:
+ Data64 = IoRead64 (IoRead->Port);
+ break;
+ default:
+ Data64 = (UINT64) -1;
+ }
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &Data64, IoRead->Width);
+ break;
+
+ case DEBUG_COMMAND_WRITE_IO:
+ IoWrite = (DEBUG_DATA_WRITE_IO *) (DebugHeader + 1);
+ switch (IoWrite->Width) {
+ case 1:
+ Data64 = IoWrite8 (IoWrite->Port, *(UINT8 *) &IoWrite->Data);
+ break;
+ case 2:
+ Data64 = IoWrite16 (IoWrite->Port, *(UINT16 *) &IoWrite->Data);
+ break;
+ case 4:
+ Data64 = IoWrite32 (IoWrite->Port, *(UINT32 *) &IoWrite->Data);
+ break;
+ case 8:
+ Data64 = IoWrite64 (IoWrite->Port, *(UINT64 *) &IoWrite->Data);
+ break;
+ default:
+ Data64 = (UINT64) -1;
+ }
+ SendAckPacket (DEBUG_COMMAND_OK);
+ break;
+
+ case DEBUG_COMMAND_READ_REGISTER:
+ RegisterRead = (DEBUG_DATA_READ_REGISTER *) (DebugHeader + 1);
+
+ if (RegisterRead->Index < SOFT_DEBUGGER_REGISTER_OTHERS_BASE) {
+ Data8 = RegisterRead->Length;
+ RegisterBuffer = ArchReadRegisterBuffer (CpuContext, RegisterRead->Index, RegisterRead->Offset, &Data8);
+ Status = SendDataResponsePacket (CpuContext, RegisterBuffer, Data8);
+ break;
+ }
+
+ if (RegisterRead->Index <= SOFT_DEBUGGER_REGISTER_TSS_LIM) {
+ ReadRegisterGroupSegLim (CpuContext, &RegisterGroupSegLim);
+ DataN = * ((UINTN *) &RegisterGroupSegLim + (RegisterRead->Index - SOFT_DEBUGGER_REGISTER_CS_LIM));
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &DataN, (UINT16) sizeof (UINTN));
+ } else if (RegisterRead->Index <= SOFT_DEBUGGER_REGISTER_TSS_BAS) {
+ ReadRegisterGroupSegBase (CpuContext, &RegisterGroupSegBase);
+ DataN = * ((UINTN *) &RegisterGroupSegBase + (RegisterRead->Index - SOFT_DEBUGGER_REGISTER_CS_BAS));
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &DataN, (UINT16) sizeof (UINTN));
+ } else if (RegisterRead->Index < SOFT_DEBUGGER_REGISTER_IDT_LIM) {
+ Data64 = ReadRegisterSelectorByIndex (CpuContext, RegisterRead->Index);
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &Data64, (UINT16) sizeof (UINT64));
+ } else {
+ switch (RegisterRead->Index) {
+ case SOFT_DEBUGGER_REGISTER_IDT_LIM:
+ DataN = (UINTN) (CpuContext->Idtr[0] & 0xffff);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &DataN, (UINT16) sizeof (UINTN));
+ break;
+ case SOFT_DEBUGGER_REGISTER_GDT_LIM:
+ DataN = (UINTN) (CpuContext->Gdtr[0] & 0xffff);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &DataN, (UINT16) sizeof (UINTN));
+ break;
+ case SOFT_DEBUGGER_REGISTER_IDT_BAS:
+ DataN = (UINTN) RShiftU64 (CpuContext->Idtr[0], 16);
+ DataN |= (UINTN) LShiftU64 (CpuContext->Idtr[1], (UINT16) (sizeof (UINTN) * 8 - 16));
+ SendDataResponsePacket (CpuContext, (UINT8 *) &DataN, (UINT16) sizeof (UINTN));
+ break;
+ case SOFT_DEBUGGER_REGISTER_GDT_BAS:
+ DataN = (UINTN) RShiftU64 (CpuContext->Gdtr[0], 16);
+ DataN |= (UINTN) LShiftU64 (CpuContext->Gdtr[1], (UINT16) (sizeof (UINTN) * 8 - 16));
+ SendDataResponsePacket (CpuContext, (UINT8 *) &DataN, (UINT16) sizeof (UINTN));
+ break;
+ }
+ }
+ break;
+
+ case DEBUG_COMMAND_WRITE_REGISTER:
+ RegisterWrite = (DEBUG_DATA_WRITE_REGISTER *) (DebugHeader + 1);
+ ArchWriteRegisterBuffer (CpuContext, RegisterWrite->Index, RegisterWrite->Offset, RegisterWrite->Length, (UINT8 *)&RegisterWrite->Value);
+ SendAckPacket (DEBUG_COMMAND_OK);
+ break;
+
+ case DEBUG_COMMAND_ARCH_MODE:
+ Data8 = DEBUG_ARCH_SYMBOL;
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &Data8, (UINT16) sizeof (UINT8));
+ break;
+
+ case DEBUG_COMMAND_READ_MSR:
+ MsrRegisterRead = (DEBUG_DATA_READ_MSR *) (DebugHeader + 1);
+ Data64 = AsmReadMsr64 (MsrRegisterRead->Index);
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &Data64, (UINT16) sizeof (UINT64));
+ break;
+
+ case DEBUG_COMMAND_WRITE_MSR:
+ MsrRegisterWrite = (DEBUG_DATA_WRITE_MSR *) (DebugHeader + 1);
+ AsmWriteMsr64 (MsrRegisterWrite->Index, MsrRegisterWrite->Value);
+ SendAckPacket (DEBUG_COMMAND_OK);
+ break;
+
+ case DEBUG_COMMAND_READ_REGISTER_GROUP:
+ Data8 = *(UINT8 *) (DebugHeader + 1);
+ Status = ArchReadRegisterGroup (CpuContext, Data8);
+ break;
+
+ case DEBUG_COMMAND_SET_DEBUG_FLAG:
+ Data32 = *(UINT32 *) (DebugHeader + 1);
+ SetDebugFlag (Data32);
+ SendAckPacket (DEBUG_COMMAND_OK);
+ break;
+
+ case DEBUG_COMMAND_GET_REVISION:
+ DebugAgentRevision.Revision = DEBUG_AGENT_REVISION;
+ DebugAgentRevision.Capabilities = DEBUG_AGENT_CAPABILITIES;
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &DebugAgentRevision, (UINT16) sizeof (DEBUG_DATA_RESPONSE_GET_REVISION));
+ break;
+
+ case DEBUG_COMMAND_GET_EXCEPTION:
+ Exception.ExceptionNum = (UINT8) Vector;
+ Exception.ExceptionData = 0;
+ Status = SendDataResponsePacket (CpuContext, (UINT8 *) &Exception, (UINT16) sizeof (DEBUG_DATA_RESPONSE_GET_EXCEPTION));
+ break;
+
+ case DEBUG_COMMAND_SET_VIEWPOINT:
+ Data32 = *(UINT32 *) (DebugHeader + 1);
+
+ if (MultiProcessorDebugSupport) {
+ if (IsCpuStopped (Data32)) {
+ SetDebugViewPoint (Data32);
+ SendAckPacket (DEBUG_COMMAND_OK);
+ } else {
+ //
+ // If CPU is not halted
+ //
+ SendAckPacket (DEBUG_COMMAND_NOT_SUPPORTED);
+ }
+ } else if (Data32 == 0) {
+ SendAckPacket (DEBUG_COMMAND_OK);
+
+ } else {
+ SendAckPacket (DEBUG_COMMAND_NOT_SUPPORTED);
+ }
+
+ break;
+
+ case DEBUG_COMMAND_GET_VIEWPOINT:
+ Data32 = mDebugMpContext.ViewPointIndex;
+ SendDataResponsePacket(CpuContext, (UINT8 *) &Data32, (UINT16) sizeof (UINT32));
+ break;
+
+ default:
+ SendAckPacket (DEBUG_COMMAND_NOT_SUPPORTED);
+ break;
+ }
+
+ if (Status == RETURN_UNSUPPORTED) {
+ SendAckPacket (DEBUG_COMMAND_NOT_SUPPORTED);
+ } else if (Status != RETURN_SUCCESS) {
+ SendAckPacket (DEBUG_COMMAND_ABORT);
+ }
+
+ ReleaseDebugPortControl ();
+ CpuPause ();
+ }
+}
+
+/**
+ C function called in interrupt handler.
+
+ @param[in] Vector Vector value of exception or interrutp.
+ @param[in] CpuContext Pointer to save CPU context.
+
+**/
+VOID
+EFIAPI
+InterruptProcess (
+ IN UINT32 Vector,
+ IN DEBUG_CPU_CONTEXT *CpuContext
+ )
+{
+ UINT8 InputCharacter;
+ UINT8 BreakCause;
+ UINTN SavedEip;
+ BOOLEAN BreakReceived;
+ UINT32 ProcessorIndex;
+ UINT32 CurrentDebugTimerInitCount;
+ DEBUG_PORT_HANDLE Handle;
+ UINT8 Data8;
+
+ Handle = GetDebugPortHandle();
+
+ ProcessorIndex = 0;
+ BreakReceived = FALSE;
+
+ if (MultiProcessorDebugSupport) {
+ ProcessorIndex = GetProcessorIndex ();
+ while (mDebugMpContext.RunCommandSet);
+ }
+
+ switch (Vector) {
+ case DEBUG_INT1_VECTOR:
+ case DEBUG_INT3_VECTOR:
+
+ BreakCause = GetBreakCause (Vector, CpuContext);
+
+ if (BreakCause == DEBUG_DATA_BREAK_CAUSE_SYSTEM_RESET) {
+
+ //
+ // Init break, if no ack received after 200ms, return
+ //
+ SendAckPacket (DEBUG_COMMAND_INIT_BREAK);
+ if (WaitForAckPacketOK (200 * 1000, &BreakReceived) != RETURN_SUCCESS) {
+ break;
+ }
+
+ SetHostConnectedFlag ();
+ CommandCommunication (Vector, CpuContext, BreakReceived);
+
+ } else if (BreakCause == DEBUG_DATA_BREAK_CAUSE_STEPPING) {
+
+ //
+ // Stepping is finished, send Ack package.
+ //
+ if (MultiProcessorDebugSupport) {
+ mDebugMpContext.BreakAtCpuIndex = ProcessorIndex;
+ }
+ SendAckPacket (DEBUG_COMMAND_OK);
+ CommandCommunication (Vector, CpuContext, BreakReceived);
+
+ } else if (BreakCause == DEBUG_DATA_BREAK_CAUSE_MEMORY_READY) {
+
+ //
+ // Memory is ready
+ //
+ SendAckPacket (DEBUG_COMMAND_MEMORY_READY);
+ WaitForAckPacketOK (0, &BreakReceived);
+ CommandCommunication (Vector, CpuContext, BreakReceived);
+
+ } else {
+
+ if (BreakCause == DEBUG_DATA_BREAK_CAUSE_IMAGE_LOAD || BreakCause == DEBUG_DATA_BREAK_CAUSE_IMAGE_UNLOAD) {
+
+ //
+ // Set AL to DEBUG_AGENT_IMAGE_CONTINUE
+ //
+ Data8 = DEBUG_AGENT_IMAGE_CONTINUE;
+ ArchWriteRegisterBuffer (CpuContext, SOFT_DEBUGGER_REGISTER_AX, 0, 1, &Data8);
+
+ if (!IsHostConnected ()) {
+ //
+ // If HOST is not connected, return
+ //
+ break;
+ }
+ }
+
+ AcquireDebugPortControl ();
+
+ if (MultiProcessorDebugSupport) {
+ if(!IsAllCpuRunning ()) {
+ //
+ // If other processors have been stopped
+ //
+ SetCpuBreakFlagByIndex (ProcessorIndex, TRUE);
+ } else {
+ //
+ // If no any processor was stopped, try to halt other processors
+ //
+ HaltOtherProcessors (ProcessorIndex);
+ SendAckPacket (DEBUG_COMMAND_BREAK_POINT);
+ WaitForAckPacketOK (0, &BreakReceived);
+ }
+ } else {
+ SendAckPacket (DEBUG_COMMAND_BREAK_POINT);
+ WaitForAckPacketOK (0, &BreakReceived);
+ }
+
+ ReleaseDebugPortControl ();
+
+ if (Vector == DEBUG_INT3_VECTOR) {
+ //
+ // go back address located "0xCC"
+ //
+ CpuContext->Eip--;
+ SavedEip = CpuContext->Eip;
+ CommandCommunication (Vector, CpuContext, BreakReceived);
+ if ((SavedEip == CpuContext->Eip) &&
+ (*(UINT8 *) (UINTN) CpuContext->Eip == DEBUG_SW_BREAKPOINT_SYMBOL)) {
+ //
+ // If this is not a software breakpoint set by HOST,
+ // restore EIP
+ //
+ CpuContext->Eip++;
+ }
+ } else {
+ CommandCommunication (Vector, CpuContext, BreakReceived);
+ }
+ }
+
+ break;
+
+ case DEBUG_TIMER_VECTOR:
+
+ if (MultiProcessorDebugSupport) {
+ if (IsBsp (ProcessorIndex)) {
+ //
+ // If current processor is BSP, check Apic timer's init count if changed,
+ // it may be re-written when switching BSP.
+ // If it changed, re-initialize debug timer
+ //
+ CurrentDebugTimerInitCount = GetApicTimerInitCount ();
+ if (mDebugMpContext.DebugTimerInitCount != CurrentDebugTimerInitCount) {
+ InitializeDebugTimer ();
+ }
+ }
+
+ if (!IsBsp (ProcessorIndex) || mDebugMpContext.IpiSentByAp) {
+ //
+ // If current processor is not BSP or this is one IPI sent by AP
+ //
+ if (mDebugMpContext.BreakAtCpuIndex != (UINT32) (-1)) {
+ CommandCommunication (Vector, CpuContext, FALSE);
+ }
+
+ //
+ // Clear EOI before exiting interrupt process routine.
+ //
+ SendApicEoi ();
+ break;
+ }
+ }
+
+ //
+ // Only BSP could run here
+ //
+
+ AcquireDebugPortControl ();
+
+ while (DebugPortPollBuffer (Handle)) {
+ //
+ // If there is data in debug port, will check whether it is break-in symbol,
+ // If yes, go into communication mode with HOST.
+ // If no, exit interrupt process.
+ //
+ DebugPortReadBuffer (Handle, &InputCharacter, 1, 0);
+ if (InputCharacter == DEBUG_STARTING_SYMBOL_BREAK) {
+ SendAckPacket (DEBUG_COMMAND_OK);
+ if (MultiProcessorDebugSupport) {
+ if(FindCpuNotRunning () != -1) {
+ SetCpuBreakFlagByIndex (ProcessorIndex, TRUE);
+ } else {
+ HaltOtherProcessors (ProcessorIndex);
+ }
+ }
+ ReleaseDebugPortControl ();
+ CommandCommunication (Vector, CpuContext, BreakReceived);
+ AcquireDebugPortControl ();
+ break;
+ }
+ }
+
+ //
+ // Clear EOI before exiting interrupt process routine.
+ //
+ SendApicEoi ();
+
+ ReleaseDebugPortControl ();
+
+ break;
+
+ default:
+
+ if (Vector <= DEBUG_EXCEPT_SIMD) {
+
+ AcquireDebugPortControl ();
+
+ if (MultiProcessorDebugSupport) {
+ if(FindCpuNotRunning () != -1) {
+ SetCpuBreakFlagByIndex (ProcessorIndex, TRUE);
+ } else {
+ HaltOtherProcessors (ProcessorIndex);
+ }
+ }
+ SendAckPacket (DEBUG_COMMAND_BREAK_POINT);
+ WaitForAckPacketOK (0, &BreakReceived);
+ ReleaseDebugPortControl ();
+ CommandCommunication (Vector, CpuContext, BreakReceived);
+ }
+ break;
+ }
+
+ if (MultiProcessorDebugSupport) {
+ //
+ // Clear flag and wait for all processors run here
+ //
+ SetIpiSentByApFlag (FALSE);
+ while (mDebugMpContext.RunCommandSet);
+ }
+
+ return;
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugAgent.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugAgent.h new file mode 100644 index 0000000000..9671ca4efe --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugAgent.h @@ -0,0 +1,308 @@ +/** @file
+ Command header of for Debug Agent library instance.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DEBUG_AGENT_H_
+#define _DEBUG_AGENT_H_
+
+#include <Register/LocalApic.h>
+
+#include <Guid/DebugAgentGuid.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/ResetSystemLib.h>
+#include <Library/IoLib.h>
+#include <Library/HobLib.h>
+#include <Library/DebugCommunicationLib.h>
+#include <Library/DebugAgentLib.h>
+#include <Library/PcdLib.h>
+#include <Library/SynchronizationLib.h>
+#include <Library/LocalApicLib.h>
+
+#include <TransferProtocol.h>
+#include <ImageDebugSupport.h>
+
+#include "DebugMp.h"
+#include "DebugTimer.h"
+#include "ArchDebugSupport.h"
+
+#define DEBUG_AGENT_REVISION ((0 << 16) | 01)
+#define DEBUG_AGENT_CAPABILITIES 0
+
+#define DEBUG_INT1_VECTOR 1
+#define DEBUG_INT3_VECTOR 3
+#define DEBUG_TIMER_VECTOR 32
+#define DEBUG_MAILBOX_VECTOR 33
+
+#define SOFT_INTERRUPT_SIGNATURE SIGNATURE_32('S','O','F','T')
+#define SYSTEM_RESET_SIGNATURE SIGNATURE_32('S','Y','S','R')
+#define MEMORY_READY_SIGNATURE SIGNATURE_32('M','E','M','R')
+
+extern UINTN Exception0Handle;
+extern UINTN TimerInterruptHandle;
+extern UINT16 ExceptionStubHeaderSize;
+
+typedef union {
+ struct {
+ UINT32 HostPresent : 1;
+ UINT32 BreakOnNextSmi : 1;
+ UINT32 Reserved : 30;
+ } Bits;
+ UINT32 Uint32;
+} DEBUG_AGENT_FLAG;
+
+#pragma pack(1)
+typedef struct {
+ DEBUG_AGENT_FLAG DebugFlag;
+ UINT64 DebugPortHandle;
+} DEBUG_AGENT_MAILBOX;
+#pragma pack()
+
+typedef union {
+ struct {
+ UINT32 LimitLow : 16;
+ UINT32 BaseLow : 16;
+ UINT32 BaseMid : 8;
+ UINT32 Type : 4;
+ UINT32 System : 1;
+ UINT32 Dpl : 2;
+ UINT32 Present : 1;
+ UINT32 LimitHigh : 4;
+ UINT32 Software : 1;
+ UINT32 Reserved : 1;
+ UINT32 DefaultSize : 1;
+ UINT32 Granularity : 1;
+ UINT32 BaseHigh : 8;
+ } Bits;
+ UINT64 Uint64;
+} IA32_GDT;
+
+/**
+ Caller provided function to be invoked at the end of DebugPortInitialize().
+
+ Refer to the descrption for DebugPortInitialize() for more details.
+
+ @param[in] Context The first input argument of DebugPortInitialize().
+ @param[in] DebugPortHandle Debug port handle created by Debug Communication Libary.
+
+**/
+VOID
+EFIAPI
+InitializeDebugAgentPhase2 (
+ IN VOID *Context,
+ IN DEBUG_PORT_HANDLE DebugPortHandle
+ );
+
+/**
+ Initialize IDT entries to support source level debug.
+
+**/
+VOID
+InitializeDebugIdt (
+ VOID
+ );
+
+/**
+ Write specified register into save CPU context.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Index Register index value.
+ @param[in] Offset Offset in register address range
+ @param[in] Width Data width to read.
+ @param[in] RegisterBuffer Pointer to input buffer with data.
+
+**/
+VOID
+ArchWriteRegisterBuffer (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 Index,
+ IN UINT8 Offset,
+ IN UINT8 Width,
+ IN UINT8 *RegisterBuffer
+ );
+
+/**
+ Read register value from saved CPU context.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Index Register index value.
+ @param[in] Offset Offset in register address range
+ @param[in] Width Data width to read.
+
+ @return The address of register value.
+
+**/
+UINT8 *
+ArchReadRegisterBuffer (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 Index,
+ IN UINT8 Offset,
+ IN UINT8 *Width
+ );
+
+/**
+ Send packet with response data to HOST.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Data Pointer to response data buffer.
+ @param[in] DataSize Size of response data in byte.
+
+ @retval RETURN_SUCCESS Response data was sent successfully.
+ @retval RETURN_DEVICE_ERROR Cannot receive DEBUG_COMMAND_OK from HOST.
+
+**/
+RETURN_STATUS
+SendDataResponsePacket (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 *Data,
+ IN UINT16 DataSize
+ );
+
+/**
+ Read segment selector by register index.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterIndex Register Index.
+
+ @return Value of segment selector.
+
+**/
+UINT64
+ReadRegisterSelectorByIndex (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 RegisterIndex
+ );
+
+/**
+ Read group register of common registers.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroup Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroup (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP *RegisterGroup
+ );
+
+/**
+ Read group register of Segment Base.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroupSegBase Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroupSegBase (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE *RegisterGroupSegBase
+ );
+
+/**
+ Read gourp register of Segment Limit.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroupSegLim Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroupSegLim (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM *RegisterGroupSegLim
+ );
+
+/**
+ Read group register by group index.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] GroupIndex Group Index.
+
+ @retval RETURN_SUCCESS Read successfully.
+ @retval RETURN_NOT_SUPPORTED Group index cannot be supported.
+
+**/
+RETURN_STATUS
+ArchReadRegisterGroup (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 GroupIndex
+ );
+
+/**
+ Send acknowledge packet to HOST.
+
+ @param AckCommand Type of Acknowledge packet.
+
+**/
+VOID
+SendAckPacket (
+ IN UINT8 AckCommand
+ );
+
+/**
+ Receive acknowledge packet OK from HOST in specified time.
+
+ @param[in] Timeout Time out value to wait for acknowlege from HOST.
+ The unit is microsecond.
+ @param[out] BreakReceived If BreakReceived is not NULL,
+ TRUE is retured if break-in symbol received.
+ FALSE is retured if break-in symbol not received.
+
+ @retval RETRUEN_SUCCESS Succeed to receive acknowlege packet from HOST,
+ the type of acknowlege packet saved in Ack.
+ @retval RETURN_TIMEOUT Specified timeout value was up.
+
+**/
+RETURN_STATUS
+WaitForAckPacketOK (
+ IN UINTN Timeout,
+ OUT BOOLEAN *BreakReceived OPTIONAL
+ );
+
+/**
+ Check if HOST is connected based on Mailbox.
+
+ @retval TRUE HOST is connected.
+ @retval FALSE HOST is not connected.
+
+**/
+BOOLEAN
+IsHostConnected (
+ VOID
+ );
+
+/**
+ Get Debug Agent Mailbox pointer.
+
+ @return Mailbox pointer.
+
+**/
+DEBUG_AGENT_MAILBOX *
+GetMailboxPointer (
+ VOID
+ );
+
+/**
+ Get debug port handle.
+
+ @return Debug port handle.
+
+**/
+DEBUG_PORT_HANDLE
+GetDebugPortHandle (
+ VOID
+ );
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugMp.c b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugMp.c new file mode 100644 index 0000000000..7d053fadc0 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugMp.c @@ -0,0 +1,365 @@ +/** @file
+ Multi-Processor support functions implementation.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugAgent.h"
+
+DEBUG_MP_CONTEXT volatile mDebugMpContext = {0,0,0,0,0,0,0,0,FALSE,FALSE};
+
+DEBUG_CPU_DATA volatile mDebugCpuData = {0};
+
+/**
+ Acquire access control on debug port.
+
+ It will block in the function if cannot get the access control.
+
+**/
+VOID
+AcquireDebugPortControl (
+ VOID
+ )
+{
+ if (!MultiProcessorDebugSupport) {
+ return;
+ }
+
+ while (TRUE) {
+ if (AcquireSpinLockOrFail (&mDebugMpContext.DebugPortSpinLock)) {
+ break;
+ }
+ CpuPause ();
+ continue;
+ }
+}
+
+/**
+ Release access control on debug port.
+
+**/
+VOID
+ReleaseDebugPortControl (
+ VOID
+ )
+{
+ if (!MultiProcessorDebugSupport) {
+ return;
+ }
+
+ ReleaseSpinLock (&mDebugMpContext.DebugPortSpinLock);
+}
+
+/**
+ Acquire access control on MP context.
+
+ It will block in the function if cannot get the access control.
+
+**/
+VOID
+AcquireMpContextControl (
+ VOID
+ )
+{
+ while (TRUE) {
+ if (AcquireSpinLockOrFail (&mDebugMpContext.MpContextSpinLock)) {
+ break;
+ }
+ CpuPause ();
+ continue;
+ }
+}
+
+/**
+ Release access control on MP context.
+
+**/
+VOID
+ReleaseMpContextControl (
+ VOID
+ )
+{
+ ReleaseSpinLock (&mDebugMpContext.MpContextSpinLock);
+}
+
+/**
+ Break the other processor by send IPI.
+
+ @param[in] CurrentProcessorIndex Current processor index value.
+
+**/
+VOID
+HaltOtherProcessors (
+ IN UINT32 CurrentProcessorIndex
+ )
+{
+
+ if (!IsBsp (CurrentProcessorIndex)) {
+ SetIpiSentByApFlag (TRUE);;
+ }
+
+ mDebugMpContext.BreakAtCpuIndex = CurrentProcessorIndex;
+
+ //
+ // Send fixed IPI to other processors.
+ //
+ SendFixedIpiAllExcludingSelf (DEBUG_TIMER_VECTOR);
+
+}
+
+/**
+ Get the current processor's index.
+
+ @return Processor index value.
+
+**/
+UINT32
+GetProcessorIndex (
+ VOID
+ )
+{
+ UINT32 Index;
+ UINT16 LocalApicID;
+
+ LocalApicID = (UINT16) GetApicId ();
+
+ AcquireMpContextControl ();
+
+ for (Index = 0; Index < mDebugCpuData.CpuCount; Index ++) {
+ if (mDebugCpuData.ApicID[Index] == LocalApicID) {
+ break;
+ }
+ }
+
+ if (Index == mDebugCpuData.CpuCount) {
+ mDebugCpuData.ApicID[Index] = LocalApicID;
+ mDebugCpuData.CpuCount ++ ;
+ }
+
+ ReleaseMpContextControl ();
+
+ return Index;
+}
+
+/**
+ Check if the specified processor is BSP or not.
+
+ @param[in] ProcessorIndex Processor index value.
+
+ @retval TRUE It is BSP.
+ @retval FALSE It isn't BSP.
+
+**/
+BOOLEAN
+IsBsp (
+ IN UINT32 ProcessorIndex
+ )
+{
+ if (AsmMsrBitFieldRead64 (MSR_IA32_APIC_BASE_ADDRESS, 8, 8) == 1) {
+ if (mDebugMpContext.BspIndex != ProcessorIndex) {
+ AcquireMpContextControl ();
+ mDebugMpContext.BspIndex = ProcessorIndex;
+ ReleaseMpContextControl ();
+ }
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Set processor stop flag bitmask in MP context.
+
+ @param[in] ProcessorIndex Processor index value.
+ @param[in] StopFlag TRUE means set stop flag.
+ FALSE means clean break flag.
+
+**/
+VOID
+SetCpuStopFlagByIndex (
+ IN UINT32 ProcessorIndex,
+ IN BOOLEAN StopFlag
+ )
+{
+ UINT8 Value;
+ UINTN Index;
+
+ AcquireMpContextControl ();
+
+ Value = mDebugMpContext.CpuStopStatusMask[ProcessorIndex / 8];
+ Index = ProcessorIndex % 8;
+ if (StopFlag) {
+ Value = BitFieldWrite8 (Value, Index, Index, 1);
+ } else {
+ Value = BitFieldWrite8 (Value, Index, Index, 0);
+ }
+ mDebugMpContext.CpuStopStatusMask[ProcessorIndex / 8] = Value;
+
+ ReleaseMpContextControl ();
+}
+
+/**
+ Set processor break flag bitmask in MP context.
+
+ @param[in] ProcessorIndex Processor index value.
+ @param[in] BreakFlag TRUE means set break flag.
+ FALSE means clean break flag.
+
+**/
+VOID
+SetCpuBreakFlagByIndex (
+ IN UINT32 ProcessorIndex,
+ IN BOOLEAN BreakFlag
+ )
+{
+ UINT8 Value;
+ UINTN Index;
+
+ AcquireMpContextControl ();
+
+ Value = mDebugMpContext.CpuBreakMask[ProcessorIndex / 8];
+ Index = ProcessorIndex % 8;
+ if (BreakFlag) {
+ Value = BitFieldWrite8 (Value, Index, Index, 1);
+ } else {
+ Value = BitFieldWrite8 (Value, Index, Index, 0);
+ }
+ mDebugMpContext.CpuBreakMask[ProcessorIndex / 8] = Value;
+
+ ReleaseMpContextControl ();
+}
+
+/**
+ Check if processor is stopped already.
+
+ @param[in] ProcessorIndex Processor index value.
+
+ @retval TRUE Processor is stopped already.
+ @retval TRUE Processor isn't stopped.
+
+**/
+BOOLEAN
+IsCpuStopped (
+ IN UINT32 ProcessorIndex
+ )
+{
+ UINT8 CpuMask;
+
+ CpuMask = (UINT8) (1 << (ProcessorIndex % 8));
+
+ if ((mDebugMpContext.CpuStopStatusMask[ProcessorIndex / 8] & CpuMask) != 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/**
+ Set the run command flag.
+
+ @param[in] RunningFlag TRUE means run command flag is set.
+ FALSE means run command flag is cleared.
+
+**/
+VOID
+SetCpuRunningFlag (
+ IN BOOLEAN RunningFlag
+ )
+{
+ AcquireMpContextControl ();
+
+ mDebugMpContext.RunCommandSet = RunningFlag;
+
+ ReleaseMpContextControl ();
+}
+
+/**
+ Set the current view point to be debugged.
+
+ @param[in] ProcessorIndex Processor index value.
+
+**/
+VOID
+SetDebugViewPoint (
+ IN UINT32 ProcessorIndex
+ )
+{
+ AcquireMpContextControl ();
+
+ mDebugMpContext.ViewPointIndex = ProcessorIndex;
+
+ ReleaseMpContextControl ();
+}
+
+/**
+ Initialize debug timer.
+
+ @param[in] IpiSentByApFlag TRUE means this IPI is sent by AP.
+ FALSE means this IPI is sent by BSP.
+
+**/
+VOID
+SetIpiSentByApFlag (
+ IN BOOLEAN IpiSentByApFlag
+ )
+{
+ AcquireMpContextControl ();
+
+ mDebugMpContext.IpiSentByAp = IpiSentByApFlag;
+
+ ReleaseMpContextControl ();
+}
+
+/**
+ Check if any processor breaks.
+
+ @retval others There is at least one processor broken, the minimum
+ index number of Processor returned.
+ @retval -1 No any processor broken.
+
+**/
+UINT32
+FindCpuNotRunning (
+ VOID
+ )
+{
+ UINT32 Index;
+
+ for (Index = 0; Index < DEBUG_CPU_MAX_COUNT / 8; Index ++) {
+ if (mDebugMpContext.CpuBreakMask[Index] != 0) {
+ return (UINT32) LowBitSet32 (mDebugMpContext.CpuBreakMask[Index]) + Index * 8;
+ }
+ }
+ return (UINT32)-1;
+}
+
+/**
+ Check if all processors are in running status.
+
+ @retval TRUE All processors run.
+ @retval FALSE At least one processor does not run.
+
+**/
+BOOLEAN
+IsAllCpuRunning (
+ VOID
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < DEBUG_CPU_MAX_COUNT / 8; Index ++) {
+ if (mDebugMpContext.CpuStopStatusMask[Index] != 0) {
+ return FALSE;
+ }
+ }
+ return TRUE;
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugMp.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugMp.h new file mode 100644 index 0000000000..db124599a5 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugMp.h @@ -0,0 +1,221 @@ +/** @file
+ Header file for Multi-Processor support.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DEBUG_MP_H_
+#define _DEBUG_MP_H_
+
+#define DEBUG_CPU_MAX_COUNT 256
+
+typedef struct {
+ UINT32 CpuCount; ///< Processor count
+ UINT16 ApicID[DEBUG_CPU_MAX_COUNT]; ///< Record the local apic id for each processor
+} DEBUG_CPU_DATA;
+
+typedef struct {
+ SPIN_LOCK MpContextSpinLock; ///< Lock for writting MP context
+ SPIN_LOCK DebugPortSpinLock; ///< Lock for access debug port
+ UINT8 CpuBreakMask[DEBUG_CPU_MAX_COUNT/8]; ///< Bitmask of all breaking CPUs
+ UINT8 CpuStopStatusMask[DEBUG_CPU_MAX_COUNT/8]; ///< Bitmask of CPU stop status
+ UINT32 ViewPointIndex; ///< Current view point to be debugged
+ UINT32 BspIndex; ///< Processor index value of BSP
+ UINT32 BreakAtCpuIndex; ///< Processor index value of the current breaking CPU
+ UINT32 DebugTimerInitCount; ///< Record BSP's init timer count
+ BOOLEAN IpiSentByAp; ///< TRUR: IPI is sent by AP. TALSE: IPI is sent by BSP
+ BOOLEAN RunCommandSet; ///< TRUE: RUN commmand is not executed. FALSE : RUN command is executed.
+} DEBUG_MP_CONTEXT;
+
+extern CONST BOOLEAN MultiProcessorDebugSupport;
+extern DEBUG_MP_CONTEXT volatile mDebugMpContext;
+extern DEBUG_CPU_DATA volatile mDebugCpuData;
+
+/**
+ Break the other processor by send IPI.
+
+ @param[in] CurrentProcessorIndex Current processor index value.
+
+**/
+VOID
+HaltOtherProcessors (
+ IN UINT32 CurrentProcessorIndex
+ );
+
+/**
+ Get the current processor's index.
+
+ @return Processor index value.
+
+**/
+UINT32
+GetProcessorIndex (
+ VOID
+ );
+
+/**
+ Acquire access control on MP context.
+
+ It will block in the function if cannot get the access control.
+
+**/
+VOID
+AcquireMpContextControl (
+ VOID
+ );
+
+/**
+ Release access control on MP context.
+
+**/
+VOID
+ReleaseMpContextControl (
+ VOID
+ );
+
+/**
+ Acquire access control on debug port.
+
+ It will block in the function if cannot get the access control.
+
+**/
+VOID
+AcquireDebugPortControl (
+ VOID
+ );
+
+/**
+ Release access control on debug port.
+
+**/
+VOID
+ReleaseDebugPortControl (
+ VOID
+ );
+
+/**
+ Check if the specified processor is BSP or not.
+
+ @param[in] ProcessorIndex Processor index value.
+
+ @retval TRUE It is BSP.
+ @retval FALSE It isn't BSP.
+
+**/
+BOOLEAN
+IsBsp (
+ IN UINT32 ProcessorIndex
+ );
+
+/**
+ Set processor stop flag bitmask in MP context.
+
+ @param[in] ProcessorIndex Processor index value.
+ @param[in] StopFlag TRUE means set stop flag.
+ FALSE means clean break flag.
+
+**/
+VOID
+SetCpuStopFlagByIndex (
+ IN UINT32 ProcessorIndex,
+ IN BOOLEAN StopFlag
+ );
+
+/**
+ Set processor break flag bitmask in MP context.
+
+ @param[in] ProcessorIndex Processor index value.
+ @param[in] BreakFlag TRUE means set break flag.
+ FALSE means clean break flag.
+
+**/
+VOID
+SetCpuBreakFlagByIndex (
+ IN UINT32 ProcessorIndex,
+ IN BOOLEAN BreakFlag
+ );
+
+/**
+ Check if processor is stopped already.
+
+ @param[in] ProcessorIndex Processor index value.
+
+ @retval TRUE Processor is stopped already.
+ @retval FALSE Processor isn't stopped.
+
+**/
+BOOLEAN
+IsCpuStopped (
+ IN UINT32 ProcessorIndex
+ );
+
+/**
+ Set the run command flag.
+
+ @param[in] RunningFlag TRUE means run command flag is set.
+ FALSE means run command flag is cleared.
+
+**/
+VOID
+SetCpuRunningFlag (
+ IN BOOLEAN RunningFlag
+ );
+
+/**
+ Set the current view point to be debugged.
+
+ @param[in] ProcessorIndex Processor index value.
+
+**/
+VOID
+SetDebugViewPoint (
+ IN UINT32 ProcessorIndex
+ );
+
+/**
+ Initialize debug timer.
+
+ @param[in] IpiSentByApFlag TRUE means this IPI is sent by AP.
+ FALSE means this IPI is sent by BSP.
+
+**/
+VOID
+SetIpiSentByApFlag (
+ IN BOOLEAN IpiSentByApFlag
+ );
+
+/**
+ Check if any processor breaks.
+
+ @retval others There is at least one processor broken, the minimum
+ index number of Processor returned.
+ @retval -1 No any processor broken.
+
+**/
+UINT32
+FindCpuNotRunning (
+ VOID
+ );
+
+/**
+ Check if all processors are in running status.
+
+ @retval TRUE All processors run.
+ @retval FALSE At least one processor does not run.
+
+**/
+BOOLEAN
+IsAllCpuRunning (
+ VOID
+ );
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugTimer.c b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugTimer.c new file mode 100644 index 0000000000..d473df8678 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugTimer.c @@ -0,0 +1,83 @@ +/** @file
+ Code for debug timer to support debug agent library implementation.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugAgent.h"
+
+/**
+ Initialize CPU local APIC timer.
+
+**/
+VOID
+InitializeDebugTimer (
+ VOID
+ )
+{
+ UINTN ApicTimerDivisor;
+ UINT32 InitialCount;
+
+ GetApicTimerState (&ApicTimerDivisor, NULL, NULL);
+
+ //
+ // Cpu Local Apic timer interrupt frequency, it is set to 0.1s
+ //
+ InitialCount = (UINT32)DivU64x32 (
+ MultU64x64 (
+ PcdGet32(PcdFSBClock) / (UINT32)ApicTimerDivisor,
+ 100
+ ),
+ 1000
+ );
+
+ InitializeApicTimer (ApicTimerDivisor, InitialCount, TRUE, DEBUG_TIMER_VECTOR);
+
+ if (MultiProcessorDebugSupport) {
+ mDebugMpContext.DebugTimerInitCount = InitialCount;
+ }
+}
+
+/**
+ Enable/Disable the interrupt of debug timer and return the interrupt state
+ prior to the operation.
+
+ If EnableStatus is TRUE, enable the interrupt of debug timer.
+ If EnableStatus is FALSE, disable the interrupt of debug timer.
+
+ @param[in] EnableStatus Enable/Disable.
+
+ @retval TRUE Debug timer interrupt were enabled on entry to this call.
+ @retval FALSE Debug timer interrupt were disabled on entry to this call.
+
+**/
+BOOLEAN
+EFIAPI
+SaveAndSetDebugTimerInterrupt (
+ IN BOOLEAN EnableStatus
+ )
+{
+ BOOLEAN OldInterruptState;
+ BOOLEAN OldDebugTimerInterruptState;
+
+ OldInterruptState = SaveAndDisableInterrupts ();
+ OldDebugTimerInterruptState = GetApicTimerInterruptState ();
+
+ if (EnableStatus) {
+ EnableApicTimerInterrupt ();
+ } else {
+ DisableApicTimerInterrupt ();
+ }
+
+ SetInterruptState (OldInterruptState);
+ return OldDebugTimerInterruptState;
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugTimer.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugTimer.h new file mode 100644 index 0000000000..4970f93da3 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/DebugTimer.h @@ -0,0 +1,28 @@ +/** @file
+ Header file for debug timer to support debug agent library implementation.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DEBUG_TIMER_H_
+#define _DEBUG_TIMER_H_
+
+/**
+ Initialize debug timer.
+
+**/
+VOID
+InitializeDebugTimer (
+ VOID
+ );
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchDebugSupport.c b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchDebugSupport.c new file mode 100644 index 0000000000..ab724ff3d6 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchDebugSupport.c @@ -0,0 +1,242 @@ +/** @file
+ Public include file for Debug Port Library.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugAgent.h"
+
+/**
+ Read the offset of FP / MMX / XMM registers by register index.
+
+ @param[in] Index Register index.
+ @param[out] Width Register width returned.
+
+ @return Offset in register address range.
+
+**/
+UINT16
+ArchReadFxStatOffset (
+ IN UINT8 Index,
+ OUT UINT8 *Width
+ )
+{
+ if (Index < SOFT_DEBUGGER_REGISTER_ST0) {
+ switch (Index) {
+ case SOFT_DEBUGGER_REGISTER_FP_FCW:
+ *Width = (UINT8) sizeof (UINT16);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Fcw);
+
+ case SOFT_DEBUGGER_REGISTER_FP_FSW:
+ *Width = (UINT8) sizeof (UINT16);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Fsw);
+
+ case SOFT_DEBUGGER_REGISTER_FP_FTW:
+ *Width = (UINT8) sizeof (UINT16);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Ftw);
+
+ case SOFT_DEBUGGER_REGISTER_FP_OPCODE:
+ *Width = (UINT8) sizeof (UINT16);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Opcode);
+
+ case SOFT_DEBUGGER_REGISTER_FP_EIP:
+ *Width = (UINT8) sizeof (UINTN);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Eip);
+
+ case SOFT_DEBUGGER_REGISTER_FP_CS:
+ *Width = (UINT8) sizeof (UINT16);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Cs);
+
+ case SOFT_DEBUGGER_REGISTER_FP_DATAOFFSET:
+ *Width = (UINT8) sizeof (UINTN);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, DataOffset);
+
+ case SOFT_DEBUGGER_REGISTER_FP_DS:
+ *Width = (UINT8) sizeof (UINT16);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Ds);
+
+ case SOFT_DEBUGGER_REGISTER_FP_MXCSR:
+ *Width = (UINT8) sizeof (UINTN);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Mxcsr);
+
+ case SOFT_DEBUGGER_REGISTER_FP_MXCSR_MASK:
+ *Width = (UINT8) sizeof (UINTN);
+ return (UINT16)OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, Mxcsr_Mask);
+ }
+ }
+
+ if (Index < SOFT_DEBUGGER_REGISTER_XMM0) {
+ *Width = 10;
+ } else if (Index < SOFT_DEBUGGER_REGISTER_MM0 ) {
+ *Width = 16;
+ } else {
+ *Width = 8;
+ Index -= SOFT_DEBUGGER_REGISTER_MM0 - SOFT_DEBUGGER_REGISTER_ST0;
+ }
+
+ return (UINT16)(OFFSET_OF(DEBUG_DATA_IA32_FX_SAVE_STATE, St0Mm0) + (Index - SOFT_DEBUGGER_REGISTER_ST0) * 16);
+}
+
+/**
+ Write specified register into save CPU context.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Index Register index value.
+ @param[in] Offset Offset in register address range.
+ @param[in] Width Data width to read.
+ @param[in] RegisterBuffer Pointer to input buffer with data.
+
+**/
+VOID
+ArchWriteRegisterBuffer (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 Index,
+ IN UINT8 Offset,
+ IN UINT8 Width,
+ IN UINT8 *RegisterBuffer
+ )
+{
+ UINT8 *Buffer;
+ if (Index < SOFT_DEBUGGER_REGISTER_FP_BASE) {
+ Buffer = (UINT8 *) CpuContext + sizeof (DEBUG_DATA_IA32_FX_SAVE_STATE) + Index * 4;
+ } else {
+ //
+ // If it is MMX register, adjust its index position
+ //
+ if (Index >= SOFT_DEBUGGER_REGISTER_MM0) {
+ Index -= SOFT_DEBUGGER_REGISTER_MM0 - SOFT_DEBUGGER_REGISTER_ST0;
+ }
+ //
+ // FPU/MMX/XMM registers
+ //
+ Buffer = (UINT8 *) CpuContext + ArchReadFxStatOffset (Index, &Width);
+ }
+
+ CopyMem (Buffer + Offset, RegisterBuffer, Width);
+}
+
+/**
+ Read register value from saved CPU context.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Index Register index value.
+ @param[in] Offset Offset in register address range
+ @param[in] Width Data width to read.
+
+ @return The address of register value.
+
+**/
+UINT8 *
+ArchReadRegisterBuffer (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 Index,
+ IN UINT8 Offset,
+ IN UINT8 *Width
+ )
+{
+ UINT8 *Buffer;
+
+ if (Index < SOFT_DEBUGGER_REGISTER_FP_BASE) {
+ Buffer = (UINT8 *) CpuContext + sizeof (DEBUG_DATA_IA32_FX_SAVE_STATE) + Index * 4;
+ if (*Width == 0) {
+ *Width = (UINT8) sizeof (UINTN);
+ }
+ } else {
+ //
+ // FPU/MMX/XMM registers
+ //
+ Buffer = (UINT8 *) CpuContext + ArchReadFxStatOffset (Index, Width);
+ }
+
+ return Buffer;
+}
+
+/**
+ Read group register of common registers.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroup Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroup (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP *RegisterGroup
+ )
+{
+ RegisterGroup->Cs = (UINT16) CpuContext->Cs;
+ RegisterGroup->Ds = (UINT16) CpuContext->Ds;
+ RegisterGroup->Es = (UINT16) CpuContext->Es;
+ RegisterGroup->Fs = (UINT16) CpuContext->Fs;
+ RegisterGroup->Gs = (UINT16) CpuContext->Gs;
+ RegisterGroup->Ss = (UINT16) CpuContext->Ss;
+ RegisterGroup->Eflags = CpuContext->Eflags;
+ RegisterGroup->Ebp = CpuContext->Ebp;
+ RegisterGroup->Eip = CpuContext->Eip;
+ RegisterGroup->Esp = CpuContext->Esp;
+ RegisterGroup->Eax = CpuContext->Eax;
+ RegisterGroup->Ebx = CpuContext->Ebx;
+ RegisterGroup->Ecx = CpuContext->Ecx;
+ RegisterGroup->Edx = CpuContext->Edx;
+ RegisterGroup->Esi = CpuContext->Esi;
+ RegisterGroup->Edi = CpuContext->Edi;
+ RegisterGroup->Dr0 = CpuContext->Dr0;
+ RegisterGroup->Dr1 = CpuContext->Dr1;
+ RegisterGroup->Dr2 = CpuContext->Dr2;
+ RegisterGroup->Dr3 = CpuContext->Dr3;
+ RegisterGroup->Dr6 = CpuContext->Dr6;
+ RegisterGroup->Dr7 = CpuContext->Dr7;
+}
+
+/**
+ Initialize IDT entries to support source level debug.
+
+**/
+VOID
+InitializeDebugIdt (
+ VOID
+ )
+{
+ IA32_IDT_GATE_DESCRIPTOR *IdtEntry;
+ UINTN InterruptHandler;
+ IA32_DESCRIPTOR IdtDescriptor;
+ UINTN Index;
+ UINT16 CodeSegment;
+
+ AsmReadIdtr (&IdtDescriptor);
+
+ //
+ // Use current CS as the segment selector of interrupt gate in IDT
+ //
+ CodeSegment = AsmReadCs ();
+
+ IdtEntry = (IA32_IDT_GATE_DESCRIPTOR *) IdtDescriptor.Base;
+
+ for (Index = 0; Index < 20; Index ++) {
+ if ((PcdGet32 (PcdExceptionsIgnoredByDebugger) & (1 << Index)) != 0) {
+ //
+ // If the exception is masked to be reserved, skip it
+ //
+ continue;
+ }
+ InterruptHandler = (UINTN)&Exception0Handle + Index * ExceptionStubHeaderSize;
+ IdtEntry[Index].Bits.OffsetLow = (UINT16)(UINTN)InterruptHandler;
+ IdtEntry[Index].Bits.OffsetHigh = (UINT16)((UINTN)InterruptHandler >> 16);
+ IdtEntry[Index].Bits.Selector = CodeSegment;
+ IdtEntry[Index].Bits.GateType = IA32_IDT_GATE_TYPE_INTERRUPT_32;
+ }
+
+ InterruptHandler = (UINTN) &TimerInterruptHandle;
+ IdtEntry[DEBUG_TIMER_VECTOR].Bits.OffsetLow = (UINT16)(UINTN)InterruptHandler;
+ IdtEntry[DEBUG_TIMER_VECTOR].Bits.OffsetHigh = (UINT16)((UINTN)InterruptHandler >> 16);
+ IdtEntry[Index].Bits.Selector = CodeSegment;
+ IdtEntry[Index].Bits.GateType = IA32_IDT_GATE_TYPE_INTERRUPT_32;
+}
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchDebugSupport.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchDebugSupport.h new file mode 100644 index 0000000000..7df3cb9415 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchDebugSupport.h @@ -0,0 +1,31 @@ +/** @file
+ IA32 specific defintions for debug agent library instance.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _ARCH_DEBUG_SUPPORT_H_
+#define _ARCH_DEBUG_SUPPORT_H_
+
+#include "ArchRegisters.h"
+#include "TransferProtocol.h"
+
+typedef DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_IA32 DEBUG_DATA_REPONSE_READ_REGISTER_GROUP;
+typedef DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM_IA32 DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM;
+typedef DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE_IA32 DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE;
+
+#define DEBUG_SW_BREAKPOINT_SYMBOL 0xcc
+
+#define DEBUG_ARCH_SYMBOL DEBUG_DATA_BREAK_CPU_ARCH_IA32
+
+typedef DEBUG_DATA_IA32_SYSTEM_CONTEXT DEBUG_CPU_CONTEXT;
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchReadGroupRegister.c b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchReadGroupRegister.c new file mode 100644 index 0000000000..59ebd00255 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchReadGroupRegister.c @@ -0,0 +1,210 @@ +/** @file
+ IA32 Group registers read support functions.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugAgent.h"
+
+/**
+ Read group register of Segment Base.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroupSegBase Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroupSegBase (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE *RegisterGroupSegBase
+ )
+{
+ IA32_DESCRIPTOR *Ia32Descriptor;
+ IA32_GDT *Ia32Gdt;
+ UINTN Index;
+
+ Ia32Descriptor = (IA32_DESCRIPTOR *) CpuContext->Gdtr;
+ Ia32Gdt = (IA32_GDT *) (Ia32Descriptor->Base);
+
+ Index = CpuContext->Cs / 8;
+ RegisterGroupSegBase->CsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Ss / 8;
+ RegisterGroupSegBase->SsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Gs / 8;
+ RegisterGroupSegBase->GsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Fs / 8;
+ RegisterGroupSegBase->FsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Es / 8;
+ RegisterGroupSegBase->EsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Ds / 8;
+ RegisterGroupSegBase->DsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+
+ RegisterGroupSegBase->LdtBas = 0;
+ RegisterGroupSegBase->TssBas = 0;
+}
+
+/**
+ Read gourp register of Segment Limit.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroupSegLim Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroupSegLim (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM *RegisterGroupSegLim
+ )
+{
+ IA32_DESCRIPTOR *Ia32Descriptor;
+ IA32_GDT *Ia32Gdt;
+ UINTN Index;
+
+ Ia32Descriptor = (IA32_DESCRIPTOR *) CpuContext->Gdtr;
+ Ia32Gdt = (IA32_GDT *) (Ia32Descriptor->Base);
+
+ Index = CpuContext->Cs / 8;
+ RegisterGroupSegLim->CsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->CsLim = (RegisterGroupSegLim->CsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Ss / 8;
+ RegisterGroupSegLim->SsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->SsLim = (RegisterGroupSegLim->SsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Gs / 8;
+ RegisterGroupSegLim->GsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->GsLim = (RegisterGroupSegLim->GsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Fs / 8;
+ RegisterGroupSegLim->FsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->FsLim = (RegisterGroupSegLim->FsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Es / 8;
+ RegisterGroupSegLim->EsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->EsLim = (RegisterGroupSegLim->EsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Ds / 8;
+ RegisterGroupSegLim->DsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->DsLim = (RegisterGroupSegLim->DsLim << 12) | 0xfff;
+ }
+
+ RegisterGroupSegLim->LdtLim = 0xffff;
+ RegisterGroupSegLim->TssLim = 0xffff;
+}
+
+/**
+ Read group register by group index.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] GroupIndex Group Index.
+
+ @retval RETURN_SUCCESS Read successfully.
+ @retval RETURN_NOT_SUPPORTED Group index cannot be supported.
+
+**/
+RETURN_STATUS
+ArchReadRegisterGroup (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 GroupIndex
+ )
+{
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP RegisterGroup;
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM RegisterGroupSegLim;
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE RegisterGroupSegBase;
+
+ switch (GroupIndex) {
+ case SOFT_DEBUGGER_REGISTER_GROUP_GPDRS32:
+ ReadRegisterGroup (CpuContext, &RegisterGroup);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroup, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_LIMITS32:
+ ReadRegisterGroupSegLim (CpuContext, &RegisterGroupSegLim);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroupSegLim, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_BASES32:
+ ReadRegisterGroupSegBase (CpuContext, &RegisterGroupSegBase);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroupSegBase, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE));
+ break;
+
+ default:
+ return RETURN_UNSUPPORTED;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Read segment selector by register index.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterIndex Register Index.
+
+ @return Value of segment selector.
+
+**/
+UINT64
+ReadRegisterSelectorByIndex (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 RegisterIndex
+ )
+{
+ IA32_DESCRIPTOR *Ia32Descriptor;
+ IA32_GDT *Ia32Gdt;
+ UINT16 Selector;
+ UINT32 Data32;
+
+ Ia32Descriptor = (IA32_DESCRIPTOR *) CpuContext->Gdtr;
+ Ia32Gdt = (IA32_GDT *) (Ia32Descriptor->Base);
+
+ Selector = 0;
+
+ switch (RegisterIndex) {
+ case SOFT_DEBUGGER_REGISTER_CSAS:
+ Selector = (UINT16) CpuContext->Cs;
+ break;
+ case SOFT_DEBUGGER_REGISTER_SSAS:
+ Selector = (UINT16) CpuContext->Ss;
+ break;
+ case SOFT_DEBUGGER_REGISTER_GSAS:
+ Selector = (UINT16) CpuContext->Gs;
+ break;
+ case SOFT_DEBUGGER_REGISTER_FSAS:
+ Selector = (UINT16) CpuContext->Fs;
+ break;
+ case SOFT_DEBUGGER_REGISTER_ESAS:
+ Selector = (UINT16) CpuContext->Es;
+ break;
+ case SOFT_DEBUGGER_REGISTER_DSAS:
+ Selector = (UINT16) CpuContext->Ds;
+ case SOFT_DEBUGGER_REGISTER_LDTAS:
+ case SOFT_DEBUGGER_REGISTER_TSSAS:
+ return 0x00820000;
+ break;
+ }
+
+ Data32 = (UINT32) RShiftU64 (Ia32Gdt[Selector / 8].Uint64, 24);
+ return (Data32 & (UINT32)(~0xff)) | Selector;
+
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchRegisters.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchRegisters.h new file mode 100644 index 0000000000..3c279589e7 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/ArchRegisters.h @@ -0,0 +1,156 @@ +/** @file
+ IA32 register defintions needed by debug transfer protocol.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _ARCH_REGISTERS_H_
+#define _ARCH_REGISTERS_H_
+
+///
+/// FXSAVE_STATE
+/// FP / MMX / XMM registers (see fxrstor instruction definition)
+///
+typedef struct {
+ UINT16 Fcw;
+ UINT16 Fsw;
+ UINT16 Ftw;
+ UINT16 Opcode;
+ UINT32 Eip;
+ UINT16 Cs;
+ UINT16 Reserved1;
+ UINT32 DataOffset;
+ UINT16 Ds;
+ UINT8 Reserved2[2];
+ UINT32 Mxcsr;
+ UINT32 Mxcsr_Mask;
+ UINT8 St0Mm0[10];
+ UINT8 Reserved3[6];
+ UINT8 St1Mm1[10];
+ UINT8 Reserved4[6];
+ UINT8 St2Mm2[10];
+ UINT8 Reserved5[6];
+ UINT8 St3Mm3[10];
+ UINT8 Reserved6[6];
+ UINT8 St4Mm4[10];
+ UINT8 Reserved7[6];
+ UINT8 St5Mm5[10];
+ UINT8 Reserved8[6];
+ UINT8 St6Mm6[10];
+ UINT8 Reserved9[6];
+ UINT8 St7Mm7[10];
+ UINT8 Reserved10[6];
+ UINT8 Xmm0[16];
+ UINT8 Xmm1[16];
+ UINT8 Xmm2[16];
+ UINT8 Xmm3[16];
+ UINT8 Xmm4[16];
+ UINT8 Xmm5[16];
+ UINT8 Xmm6[16];
+ UINT8 Xmm7[16];
+ UINT8 Reserved11[14 * 16];
+} DEBUG_DATA_IA32_FX_SAVE_STATE;
+
+///
+/// IA-32 processor context definition
+///
+typedef struct {
+ DEBUG_DATA_IA32_FX_SAVE_STATE FxSaveState;
+ UINT32 Dr0;
+ UINT32 Dr1;
+ UINT32 Dr2;
+ UINT32 Dr3;
+ UINT32 Dr6;
+ UINT32 Dr7;
+ UINT32 Eflags;
+ UINT32 Ldtr;
+ UINT32 Tr;
+ UINT32 Gdtr[2];
+ UINT32 Idtr[2];
+ UINT32 Eip;
+ UINT32 Gs;
+ UINT32 Fs;
+ UINT32 Es;
+ UINT32 Ds;
+ UINT32 Cs;
+ UINT32 Ss;
+ UINT32 Cr0;
+ UINT32 Cr1; ///< Reserved
+ UINT32 Cr2;
+ UINT32 Cr3;
+ UINT32 Cr4;
+ UINT32 Edi;
+ UINT32 Esi;
+ UINT32 Ebp;
+ UINT32 Esp;
+ UINT32 Edx;
+ UINT32 Ecx;
+ UINT32 Ebx;
+ UINT32 Eax;
+} DEBUG_DATA_IA32_SYSTEM_CONTEXT;
+
+///
+/// IA32 GROUP register
+///
+typedef struct {
+ UINT16 Cs;
+ UINT16 Ds;
+ UINT16 Es;
+ UINT16 Fs;
+ UINT16 Gs;
+ UINT16 Ss;
+ UINT32 Eflags;
+ UINT32 Ebp;
+ UINT32 Eip;
+ UINT32 Esp;
+ UINT32 Eax;
+ UINT32 Ebx;
+ UINT32 Ecx;
+ UINT32 Edx;
+ UINT32 Esi;
+ UINT32 Edi;
+ UINT32 Dr0;
+ UINT32 Dr1;
+ UINT32 Dr2;
+ UINT32 Dr3;
+ UINT32 Dr6;
+ UINT32 Dr7;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_IA32;
+
+///
+/// IA32 Segment Limit GROUP register
+///
+typedef struct {
+ UINT32 CsLim;
+ UINT32 SsLim;
+ UINT32 GsLim;
+ UINT32 FsLim;
+ UINT32 EsLim;
+ UINT32 DsLim;
+ UINT32 LdtLim;
+ UINT32 TssLim;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM_IA32;
+
+///
+/// IA32 Segment Base GROUP register
+///
+typedef struct {
+ UINT32 CsBas;
+ UINT32 SsBas;
+ UINT32 GsBas;
+ UINT32 FsBas;
+ UINT32 EsBas;
+ UINT32 DsBas;
+ UINT32 LdtBas;
+ UINT32 TssBas;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE_IA32;
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/AsmFuncs.S b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/AsmFuncs.S new file mode 100644 index 0000000000..365947f4d5 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/AsmFuncs.S @@ -0,0 +1,360 @@ +#------------------------------------------------------------------------------
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+# Module Name:
+#
+# AsmFuncs.S
+#
+# Abstract:
+#
+# Debug interrupt handle functions.
+#
+#------------------------------------------------------------------------------
+
+#include "DebugException.h"
+
+ASM_GLOBAL ASM_PFX(InterruptProcess)
+ASM_GLOBAL ASM_PFX(Exception0Handle)
+ASM_GLOBAL ASM_PFX(ExceptionStubHeaderSize)
+ASM_GLOBAL ASM_PFX(TimerInterruptHandle)
+ASM_GLOBAL ASM_PFX(CommonEntry)
+
+.data
+
+ASM_PFX(ExceptionStubHeaderSize): .word ASM_PFX(Exception1Handle) - ASM_PFX(Exception0Handle)
+
+.text
+
+ASM_PFX(Exception0Handle):
+ cli
+ pushl %eax
+ mov $0, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception1Handle):
+ cli
+ pushl %eax
+ mov $1, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception2Handle):
+ cli
+ pushl %eax
+ mov $2, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception3Handle):
+ cli
+ pushl %eax
+ mov $3, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception4Handle):
+ cli
+ pushl %eax
+ mov $4, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception5Handle):
+ cli
+ pushl %eax
+ mov $5, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception6Handle):
+ cli
+ pushl %eax
+ mov $6, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception7Handle):
+ cli
+ pushl %eax
+ mov $7, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception8Handle):
+ cli
+ pushl %eax
+ mov $8, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception9Handle):
+ cli
+ pushl %eax
+ mov $9, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception10Handle):
+ cli
+ pushl %eax
+ mov $10, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception11Handle):
+ cli
+ pushl %eax
+ mov $11, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception12Handle):
+ cli
+ pushl %eax
+ mov $12, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception13Handle):
+ cli
+ pushl %eax
+ mov $13, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception14Handle):
+ cli
+ pushl %eax
+ mov $14, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception15Handle):
+ cli
+ pushl %eax
+ mov $15, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception16Handle):
+ cli
+ pushl %eax
+ mov $16, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception17Handle):
+ cli
+ pushl %eax
+ mov $17, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception18Handle):
+ cli
+ pushl %eax
+ mov $18, %eax
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception19Handle):
+ cli
+ pushl %eax
+ mov $19, %eax
+ jmp ASM_PFX(CommonEntry)
+
+ASM_PFX(TimerInterruptHandle):
+ cli
+ pushl %eax
+ mov $32, %eax
+ jmp ASM_PFX(CommonEntry)
+
+
+ASM_PFX(CommonEntry):
+
+#---------------------------------------;
+# _CommonEntry ;
+#----------------------------------------------------------------------------;
+# The follow algorithm is used for the common interrupt routine.
+# Entry from each interrupt with a push eax and eax=interrupt number
+#
+# +---------------------+
+# + EFlags +
+# +---------------------+
+# + CS +
+# +---------------------+
+# + EIP +
+# +---------------------+
+# + Error Code +
+# +---------------------+
+# + EAX / Vector Number +
+# +---------------------+
+# + EBP +
+# +---------------------+ <-- EBP
+#
+
+# We need to determine if any extra data was pushed by the exception
+ cmpl $DEBUG_EXCEPT_DOUBLE_FAULT, %eax
+ je NoExtrPush
+ cmpl $DEBUG_EXCEPT_INVALID_TSS, %eax
+ je NoExtrPush
+ cmpl $DEBUG_EXCEPT_SEG_NOT_PRESENT, %eax
+ je NoExtrPush
+ cmpl $DEBUG_EXCEPT_STACK_FAULT, %eax
+ je NoExtrPush
+ cmpl $DEBUG_EXCEPT_GP_FAULT, %eax
+ je NoExtrPush
+ cmpl $DEBUG_EXCEPT_PAGE_FAULT, %eax
+ je NoExtrPush
+ cmpl $DEBUG_EXCEPT_ALIGNMENT_CHECK, %eax
+ je NoExtrPush
+
+ pushl (%esp)
+ movl $0, 4(%esp)
+
+NoExtrPush:
+
+ pushl %ebp
+ movl %esp,%ebp
+
+ #
+ # Align stack to make sure that EFI_FX_SAVE_STATE_IA32 of EFI_SYSTEM_CONTEXT_IA32
+ # is 16-byte aligned
+ #
+ andl $0xfffffff0,%esp
+ subl $12,%esp
+
+## UINT32 Edi, Esi, Ebp, Esp, Ebx, Edx, Ecx, Eax;
+ pushl 0x4(%ebp)
+ pushl %ebx
+ pushl %ecx
+ pushl %edx
+ mov %eax, %ebx # save vector in ebx
+ leal 24(%ebp),%ecx
+ pushl %ecx # save original ESP
+ pushl (%ebp)
+ pushl %esi
+ pushl %edi
+
+## UINT32 Cr0, Cr1, Cr2, Cr3, Cr4;
+ movl %cr4, %eax
+ orl $0x208,%eax
+ movl %eax, %cr4
+ pushl %eax
+ movl %cr3, %eax
+ pushl %eax
+ movl %cr2, %eax
+ pushl %eax
+ xorl %eax,%eax
+ pushl %eax
+ movl %cr0, %eax
+ pushl %eax
+
+## UINT32 Gs, Fs, Es, Ds, Cs, Ss;
+ movl %ss,%eax
+ pushl %eax
+ movzwl 16(%ebp), %eax
+ pushl %eax
+ movl %ds,%eax
+ pushl %eax
+ movl %es,%eax
+ pushl %eax
+ movl %fs,%eax
+ pushl %eax
+ movl %gs,%eax
+ pushl %eax
+
+## UINT32 Eip;
+ pushl 12(%ebp)
+
+## UINT32 Gdtr[2], Idtr[2];
+ subl $8,%esp
+ sidt (%esp)
+ subl $8,%esp
+ sgdt (%esp)
+
+## UINT32 Ldtr, Tr;
+ xorl %eax,%eax
+ strl %eax
+ pushl %eax
+ sldtl %eax
+ pushl %eax
+
+## UINT32 EFlags;
+ pushl 20(%ebp)
+
+## UINT32 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ movl %dr7, %eax
+ pushl %eax
+## clear Dr7 while executing debugger itself
+ xorl %eax,%eax
+# movl %eax, %dr7
+
+ movl %dr6, %eax
+ pushl %eax
+## insure all status bits in dr6 are clear...
+ xorl %eax,%eax
+ movl %eax, %dr6
+
+ movl %dr3, %eax
+ pushl %eax
+ movl %dr2, %eax
+ pushl %eax
+ movl %dr1, %eax
+ pushl %eax
+ movl %dr0, %eax
+ pushl %eax
+
+## FX_SAVE_STATE_IA32 FxSaveState;
+ subl $512,%esp
+ movl %esp,%edi
+ .byte 0x0f, 0xae, 0x07 # fxsave [edi]
+
+## Clear Direction Flag
+ cld
+
+## Prepare parameter and call C function
+ pushl %esp
+ pushl %ebx
+ call ASM_PFX(InterruptProcess)
+ addl $8,%esp
+
+## FX_SAVE_STATE_IA32 FxSaveState;
+ movl %esp,%esi
+ .byte 0x0f, 0xae, 0x0e # fxrstor [esi]
+ addl $512,%esp
+
+## UINT32 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ popl %eax
+ movl %eax, %dr0
+ popl %eax
+ movl %eax, %dr1
+ popl %eax
+ movl %eax, %dr2
+ popl %eax
+ movl %eax, %dr3
+## skip restore of dr6. We cleared dr6 during the context save.
+ addl $4,%esp
+ popl %eax
+ movl %eax, %dr7
+
+## UINT32 EFlags;
+ popl 20(%ebp)
+
+## UINT32 Ldtr, Tr;
+## UINT32 Gdtr[2], Idtr[2];
+## Best not let anyone mess with these particular registers...
+ addl $24,%esp
+
+## UINT32 Eip;
+ pop 12(%ebp)
+
+## UINT32 Gs, Fs, Es, Ds, Cs, Ss;
+## NOTE - modified segment registers could hang the debugger... We
+## could attempt to insulate ourselves against this possibility,
+## but that poses risks as well.
+##
+ popl %gs
+ popl %fs
+ popl %es
+ popl %ds
+ popl 16(%ebp)
+ popl %ss
+
+## UINT32 Cr0, Cr1, Cr2, Cr3, Cr4;
+ popl %eax
+ movl %eax, %cr0
+ addl $4,%esp # not for Cr1
+ popl %eax
+ movl %eax, %cr2
+ popl %eax
+ movl %eax, %cr3
+ popl %eax
+ movl %eax, %cr4
+
+## UINT32 Edi, Esi, Ebp, Esp, Ebx, Edx, Ecx, Eax;
+ popl %edi
+ popl %esi
+ addl $4,%esp # not for ebp
+ addl $4,%esp # not for esp
+ popl %edx
+ popl %ecx
+ popl %ebx
+ popl %eax
+
+ movl %ebp,%esp
+ popl %ebp
+ addl $8,%esp # skip eax
+ iretl
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/AsmFuncs.asm b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/AsmFuncs.asm new file mode 100644 index 0000000000..2d2fa5fc7a --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/AsmFuncs.asm @@ -0,0 +1,365 @@ +;------------------------------------------------------------------------------
+;
+; Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+; This program and the accompanying materials
+; are licensed and made available under the terms and conditions of the BSD License
+; which accompanies this distribution. The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php.
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+; Module Name:
+;
+; AsmFuncs.asm
+;
+; Abstract:
+;
+; Debug interrupt handle functions.
+;
+;------------------------------------------------------------------------------
+
+#include "DebugException.h"
+
+.686p
+.xmm
+.model flat,c
+
+;
+; InterruptProcess()
+;
+InterruptProcess PROTO C
+
+public Exception0Handle, TimerInterruptHandle, ExceptionStubHeaderSize
+
+.data
+
+ExceptionStubHeaderSize DW Exception1Handle - Exception0Handle
+CommonEntryAddr DD CommonEntry
+
+.code
+
+Exception0Handle:
+ cli
+ push eax
+ mov eax, 0
+ jmp dword ptr [CommonEntryAddr]
+Exception1Handle:
+ cli
+ push eax
+ mov eax, 1
+ jmp dword ptr [CommonEntryAddr]
+Exception2Handle:
+ cli
+ push eax
+ mov eax, 2
+ jmp dword ptr [CommonEntryAddr]
+Exception3Handle:
+ cli
+ push eax
+ mov eax, 3
+ jmp dword ptr [CommonEntryAddr]
+Exception4Handle:
+ cli
+ push eax
+ mov eax, 4
+ jmp dword ptr [CommonEntryAddr]
+Exception5Handle:
+ cli
+ push eax
+ mov eax, 5
+ jmp dword ptr [CommonEntryAddr]
+Exception6Handle:
+ cli
+ push eax
+ mov eax, 6
+ jmp dword ptr [CommonEntryAddr]
+Exception7Handle:
+ cli
+ push eax
+ mov eax, 7
+ jmp dword ptr [CommonEntryAddr]
+Exception8Handle:
+ cli
+ push eax
+ mov eax, 8
+ jmp dword ptr [CommonEntryAddr]
+Exception9Handle:
+ cli
+ push eax
+ mov eax, 9
+ jmp dword ptr [CommonEntryAddr]
+Exception10Handle:
+ cli
+ push eax
+ mov eax, 10
+ jmp dword ptr [CommonEntryAddr]
+Exception11Handle:
+ cli
+ push eax
+ mov eax, 11
+ jmp dword ptr [CommonEntryAddr]
+Exception12Handle:
+ cli
+ push eax
+ mov eax, 12
+ jmp dword ptr [CommonEntryAddr]
+Exception13Handle:
+ cli
+ push eax
+ mov eax, 13
+ jmp dword ptr [CommonEntryAddr]
+Exception14Handle:
+ cli
+ push eax
+ mov eax, 14
+ jmp dword ptr [CommonEntryAddr]
+Exception15Handle:
+ cli
+ push eax
+ mov eax, 15
+ jmp dword ptr [CommonEntryAddr]
+Exception16Handle:
+ cli
+ push eax
+ mov eax, 16
+ jmp dword ptr [CommonEntryAddr]
+Exception17Handle:
+ cli
+ push eax
+ mov eax, 17
+ jmp dword ptr [CommonEntryAddr]
+Exception18Handle:
+ cli
+ push eax
+ mov eax, 18
+ jmp dword ptr [CommonEntryAddr]
+Exception19Handle:
+ cli
+ push eax
+ mov eax, 19
+ jmp dword ptr [CommonEntryAddr]
+
+TimerInterruptHandle:
+ cli
+ push eax
+ mov eax, 32
+ jmp dword ptr [CommonEntryAddr]
+
+CommonEntry:
+;
+; +---------------------+
+; + EFlags +
+; +---------------------+
+; + CS +
+; +---------------------+
+; + EIP +
+; +---------------------+
+; + Error Code +
+; +---------------------+
+; + EAX / Vector Number +
+; +---------------------+
+; + EBP +
+; +---------------------+ <-- EBP
+;
+ cmp eax, DEBUG_EXCEPT_DOUBLE_FAULT
+ je NoExtrPush
+ cmp eax, DEBUG_EXCEPT_INVALID_TSS
+ je NoExtrPush
+ cmp eax, DEBUG_EXCEPT_SEG_NOT_PRESENT
+ je NoExtrPush
+ cmp eax, DEBUG_EXCEPT_STACK_FAULT
+ je NoExtrPush
+ cmp eax, DEBUG_EXCEPT_GP_FAULT
+ je NoExtrPush
+ cmp eax, DEBUG_EXCEPT_PAGE_FAULT
+ je NoExtrPush
+ cmp eax, DEBUG_EXCEPT_ALIGNMENT_CHECK
+ je NoExtrPush
+
+ push [esp]
+ mov dword ptr [esp + 4], 0
+
+NoExtrPush:
+
+ push ebp
+ mov ebp, esp ; save esp in ebp
+ ;
+ ; Make stack 16-byte alignment to make sure save fxrstor later
+ ;
+ and esp, 0fffffff0h
+ sub esp, 12
+
+ ; store UINT32 Edi, Esi, Ebp, Ebx, Edx, Ecx, Eax;
+ push dword ptr [ebp + 4] ; original eax
+ push ebx
+ push ecx
+ push edx
+ mov ebx, eax ; save vector in ebx
+ mov eax, ebp
+ add eax, 4 * 6
+ push eax ; original ESP
+ push dword ptr [ebp] ; EBP
+ push esi
+ push edi
+
+ ;; UINT32 Cr0, Cr1, Cr2, Cr3, Cr4;
+ ;; insure FXSAVE/FXRSTOR is enabled in CR4...
+ ;; ... while we're at it, make sure DE is also enabled...
+ mov eax, cr4
+ push eax ; push cr4 firstly
+ or eax, 208h
+ mov cr4, eax
+ mov eax, cr3
+ push eax
+ mov eax, cr2
+ push eax
+ push 0 ; cr0 will not saved???
+ mov eax, cr0
+ push eax
+
+ xor ecx, ecx
+ mov ecx, Ss
+ push ecx
+ mov ecx, Cs
+ push ecx
+ mov ecx, Ds
+ push ecx
+ mov ecx, Es
+ push ecx
+ mov ecx, Fs
+ push ecx
+ mov ecx, Gs
+ push ecx
+
+ ;; EIP
+ mov ecx, [ebp + 4 * 3] ; EIP
+ push ecx
+
+ ;; UINT32 Gdtr[2], Idtr[2];
+ sub esp, 8
+ sidt fword ptr [esp]
+ sub esp, 8
+ sgdt fword ptr [esp]
+
+ ;; UINT32 Ldtr, Tr;
+ xor eax, eax
+ str ax
+ push eax
+ sldt ax
+ push eax
+
+ ;; EFlags
+ mov ecx, [ebp + 4 * 5]
+ push ecx
+
+ ;; UINT32 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ mov eax, dr7
+ push eax
+
+ ;; clear Dr7 while executing debugger itself
+ xor eax, eax
+ ;; mov dr7, eax
+
+ ;; Dr6
+ mov eax, dr6
+ push eax
+
+ ;; insure all status bits in dr6 are clear...
+ xor eax, eax
+ mov dr6, eax
+
+ mov eax, dr3
+ push eax
+ mov eax, dr2
+ push eax
+ mov eax, dr1
+ push eax
+ mov eax, dr0
+ push eax
+
+ ;; FX_SAVE_STATE_IA32 FxSaveState;
+ sub esp, 512
+ mov edi, esp
+ db 0fh, 0aeh, 00000111y ;fxsave [edi]
+
+ ;; Clear Direction Flag
+ cld
+
+ ; call the C interrupt process function
+ push esp ; Structure
+ push ebx ; vector
+ call InterruptProcess
+ add esp, 8
+
+ ;; FX_SAVE_STATE_IA32 FxSaveState;
+ mov esi, esp
+ db 0fh, 0aeh, 00001110y ; fxrstor [esi]
+ add esp, 512
+
+ ;; UINT32 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ pop eax
+ mov dr0, eax
+ pop eax
+ mov dr1, eax
+ pop eax
+ mov dr2, eax
+ pop eax
+ mov dr3, eax
+ ;; skip restore of dr6. We cleared dr6 during the context save.
+ add esp, 4
+ pop eax
+ mov dr7, eax
+
+ ;; set EFlags
+ pop dword ptr [ebp + 4 * 5] ; set EFLAGS in stack
+
+ ;; UINT32 Ldtr, Tr;
+ ;; UINT32 Gdtr[2], Idtr[2];
+ ;; Best not let anyone mess with these particular registers...
+ add esp, 24
+
+ ;; UINT32 Eip;
+ pop dword ptr [ebp + 4 * 3] ; set EIP in stack
+
+ ;; UINT32 Gs, Fs, Es, Ds, Cs, Ss;
+ ;; NOTE - modified segment registers could hang the debugger... We
+ ;; could attempt to insulate ourselves against this possibility,
+ ;; but that poses risks as well.
+ ;;
+ pop gs
+ pop fs
+ pop es
+ pop ds
+ pop dword ptr [ebp + 4 * 4] ; set CS in stack
+ pop ss
+
+ ;; UINT32 Cr0, Cr1, Cr2, Cr3, Cr4;
+ pop eax
+ mov cr0, eax
+ add esp, 4 ; skip for Cr1
+ pop eax
+ mov cr2, eax
+ pop eax
+ mov cr3, eax
+ pop eax
+ mov cr4, eax
+
+ ;; restore general register
+ pop edi
+ pop esi
+ pop dword ptr [ebp] ; save updated ebp
+ pop dword ptr [ebp + 4] ; save updated esp
+ pop edx
+ pop ecx
+ pop ebx
+ pop eax
+
+ mov esp, ebp
+ pop ebp ; restore ebp maybe updated
+ pop esp ; restore esp maybe updated
+ sub esp, 4 * 3 ; restore interupt pushced stack
+
+ iretd
+
+END
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/DebugException.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/DebugException.h new file mode 100644 index 0000000000..13a7d23a0d --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/Ia32/DebugException.h @@ -0,0 +1,36 @@ +/** @file
+ Exception defintions.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DEBUG_EXCEPTION_H_
+#define _DEBUG_EXCEPTION_H_
+
+#define DEBUG_EXCEPT_DIVIDE_ERROR 0
+#define DEBUG_EXCEPT_DEBUG 1
+#define DEBUG_EXCEPT_NMI 2
+#define DEBUG_EXCEPT_BREAKPOINT 3
+#define DEBUG_EXCEPT_OVERFLOW 4
+#define DEBUG_EXCEPT_BOUND 5
+#define DEBUG_EXCEPT_INVALID_OPCODE 6
+#define DEBUG_EXCEPT_DOUBLE_FAULT 8
+#define DEBUG_EXCEPT_INVALID_TSS 10
+#define DEBUG_EXCEPT_SEG_NOT_PRESENT 11
+#define DEBUG_EXCEPT_STACK_FAULT 12
+#define DEBUG_EXCEPT_GP_FAULT 13
+#define DEBUG_EXCEPT_PAGE_FAULT 14
+#define DEBUG_EXCEPT_FP_ERROR 16
+#define DEBUG_EXCEPT_ALIGNMENT_CHECK 17
+#define DEBUG_EXCEPT_MACHINE_CHECK 18
+#define DEBUG_EXCEPT_SIMD 19
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchDebugSupport.c b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchDebugSupport.c new file mode 100644 index 0000000000..3c18b8676f --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchDebugSupport.c @@ -0,0 +1,255 @@ +/** @file
+ Supporting functions for x64 architecture.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugAgent.h"
+
+/**
+ Read the offset of FP / MMX / XMM registers by register index.
+
+ @param[in] Index Register index.
+ @param[out] Width Register width returned.
+
+ @return Offset in register address range.
+
+**/
+UINT16
+ArchReadFxStatOffset (
+ IN UINT8 Index,
+ OUT UINT8 *Width
+ )
+{
+ if (Index < SOFT_DEBUGGER_REGISTER_ST0) {
+ switch (Index) {
+ case SOFT_DEBUGGER_REGISTER_FP_FCW:
+ *Width = (UINT8) sizeof (UINT16);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, Fcw);
+
+ case SOFT_DEBUGGER_REGISTER_FP_FSW:
+ *Width = (UINT8) sizeof (UINT16);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, Fsw);
+
+ case SOFT_DEBUGGER_REGISTER_FP_FTW:
+ *Width = (UINT8) sizeof (UINT16);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, Ftw);
+
+ case SOFT_DEBUGGER_REGISTER_FP_OPCODE:
+ *Width = (UINT8) sizeof (UINT16);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, Opcode);
+
+ case SOFT_DEBUGGER_REGISTER_FP_EIP:
+ *Width = (UINT8) sizeof (UINTN);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, Rip);
+
+ case SOFT_DEBUGGER_REGISTER_FP_DATAOFFSET:
+ *Width = (UINT8) sizeof (UINTN);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, DataOffset);
+
+ case SOFT_DEBUGGER_REGISTER_FP_MXCSR:
+ *Width = (UINT8) sizeof (UINT32);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, Mxcsr);
+
+ case SOFT_DEBUGGER_REGISTER_FP_MXCSR_MASK:
+ *Width = (UINT8) sizeof (UINT32);
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, Mxcsr_Mask);
+
+ default:
+ return (UINT16) (-1);
+ }
+ }
+
+ if (Index < SOFT_DEBUGGER_REGISTER_XMM0) {
+ *Width = 10;
+ } else if (Index < SOFT_DEBUGGER_REGISTER_MM0 ) {
+ *Width = 16;
+ } else {
+ *Width = 8;
+ Index -= SOFT_DEBUGGER_REGISTER_MM0 - SOFT_DEBUGGER_REGISTER_ST0;
+ }
+
+ return OFFSET_OF(DEBUG_DATA_X64_FX_SAVE_STATE, St0Mm0) + (Index - SOFT_DEBUGGER_REGISTER_ST0) * 16;
+}
+
+/**
+ Write specified register into save CPU context.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Index Register index value.
+ @param[in] Offset Offset in register address range
+ @param[in] Width Data width to read.
+ @param[in] RegisterBuffer Pointer to input buffer with data.
+
+**/
+VOID
+ArchWriteRegisterBuffer (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 Index,
+ IN UINT8 Offset,
+ IN UINT8 Width,
+ IN UINT8 *RegisterBuffer
+ )
+{
+ UINT8 *Buffer;
+ if (Index < SOFT_DEBUGGER_REGISTER_FP_BASE) {
+ Buffer = (UINT8 *) CpuContext + sizeof (DEBUG_DATA_X64_FX_SAVE_STATE) + Index * 8;
+ } else {
+ //
+ // If it is MMX register, adjust its index position
+ //
+ if (Index >= SOFT_DEBUGGER_REGISTER_MM0) {
+ Index -= SOFT_DEBUGGER_REGISTER_MM0 - SOFT_DEBUGGER_REGISTER_ST0;
+ }
+
+ //
+ // FPU/MMX/XMM registers
+ //
+ Buffer = (UINT8 *) CpuContext + ArchReadFxStatOffset (Index, &Width);
+ }
+
+ CopyMem (Buffer + Offset, RegisterBuffer, Width);
+}
+
+/**
+ Read register value from saved CPU context.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] Index Register index value.
+ @param[in] Offset Offset in register address range
+ @param[in] Width Data width to read.
+
+ @return The address of register value.
+
+**/
+UINT8 *
+ArchReadRegisterBuffer (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 Index,
+ IN UINT8 Offset,
+ IN UINT8 *Width
+ )
+{
+ UINT8 *Buffer;
+
+ if (Index < SOFT_DEBUGGER_REGISTER_FP_BASE) {
+ Buffer = (UINT8 *) CpuContext + sizeof (DEBUG_DATA_X64_FX_SAVE_STATE) + Index * 8;
+ if (*Width == 0) {
+ *Width = (UINT8) sizeof (UINTN);
+ }
+ } else {
+ //
+ // FPU/MMX/XMM registers
+ //
+ Buffer = (UINT8 *) CpuContext + ArchReadFxStatOffset (Index, Width);
+ }
+
+ return Buffer;
+}
+
+/**
+ Read group register of common registers.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroup Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroup (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP *RegisterGroup
+ )
+{
+ RegisterGroup->Cs = (UINT16) CpuContext->Cs;
+ RegisterGroup->Ds = (UINT16) CpuContext->Ds;
+ RegisterGroup->Es = (UINT16) CpuContext->Es;
+ RegisterGroup->Fs = (UINT16) CpuContext->Fs;
+ RegisterGroup->Gs = (UINT16) CpuContext->Gs;
+ RegisterGroup->Ss = (UINT16) CpuContext->Ss;
+ RegisterGroup->Eflags = (UINT32) CpuContext->Eflags;
+ RegisterGroup->Rbp = CpuContext->Rbp;
+ RegisterGroup->Eip = CpuContext->Eip;
+ RegisterGroup->Rsp = CpuContext->Rsp;
+ RegisterGroup->Eax = CpuContext->Rax;
+ RegisterGroup->Rbx = CpuContext->Rbx;
+ RegisterGroup->Rcx = CpuContext->Rcx;
+ RegisterGroup->Rdx = CpuContext->Rdx;
+ RegisterGroup->Rsi = CpuContext->Rsi;
+ RegisterGroup->Rdi = CpuContext->Rdi;
+ RegisterGroup->R8 = CpuContext->R8;
+ RegisterGroup->R9 = CpuContext->R9;
+ RegisterGroup->R10 = CpuContext->R10;
+ RegisterGroup->R11 = CpuContext->R11;
+ RegisterGroup->R12 = CpuContext->R12;
+ RegisterGroup->R13 = CpuContext->R13;
+ RegisterGroup->R14 = CpuContext->R14;
+ RegisterGroup->R15 = CpuContext->R15;
+ RegisterGroup->Dr0 = CpuContext->Dr0;
+ RegisterGroup->Dr1 = CpuContext->Dr1;
+ RegisterGroup->Dr2 = CpuContext->Dr2;
+ RegisterGroup->Dr3 = CpuContext->Dr3;
+ RegisterGroup->Dr6 = CpuContext->Dr6;
+ RegisterGroup->Dr7 = CpuContext->Dr7;
+ RegisterGroup->Cr0 = CpuContext->Cr0;
+ RegisterGroup->Cr2 = CpuContext->Cr2;
+ RegisterGroup->Cr3 = CpuContext->Cr3;
+ RegisterGroup->Cr4 = CpuContext->Cr4;
+ RegisterGroup->Cr8 = CpuContext->Cr8;
+
+ CopyMem ((UINT8 *) &RegisterGroup->Xmm0[0], (UINT8 *) &CpuContext->FxSaveState.Xmm0[0], 16 * 10);
+}
+
+/**
+ Initialize IDT entries to support source level debug.
+
+**/
+VOID
+InitializeDebugIdt (
+ VOID
+ )
+{
+ IA32_IDT_GATE_DESCRIPTOR *IdtEntry;
+ UINTN InterruptHandler;
+ IA32_DESCRIPTOR IdtDescriptor;
+ UINTN Index;
+ UINT16 CodeSegment;
+
+ AsmReadIdtr (&IdtDescriptor);
+
+ //
+ // Use current CS as the segment selector of interrupt gate in IDT
+ //
+ CodeSegment = AsmReadCs ();
+
+ IdtEntry = (IA32_IDT_GATE_DESCRIPTOR *) IdtDescriptor.Base;
+
+ for (Index = 0; Index < 20; Index ++) {
+ if ((PcdGet32 (PcdExceptionsIgnoredByDebugger) & (1 << Index)) != 0) {
+ //
+ // If the exception is masked to be reserved, skip it
+ //
+ continue;
+ }
+ InterruptHandler = (UINTN)&Exception0Handle + Index * ExceptionStubHeaderSize;
+ IdtEntry[Index].Bits.OffsetLow = (UINT16)(UINTN)InterruptHandler;
+ IdtEntry[Index].Bits.OffsetHigh = (UINT16)((UINTN)InterruptHandler >> 16);
+ IdtEntry[Index].Bits.OffsetUpper = (UINT32)((UINTN)InterruptHandler >> 32);
+ IdtEntry[Index].Bits.Selector = CodeSegment;
+ IdtEntry[Index].Bits.GateType = IA32_IDT_GATE_TYPE_INTERRUPT_32;
+ }
+
+ InterruptHandler = (UINTN) &TimerInterruptHandle;
+ IdtEntry[DEBUG_TIMER_VECTOR].Bits.OffsetLow = (UINT16)(UINTN)InterruptHandler;
+ IdtEntry[DEBUG_TIMER_VECTOR].Bits.OffsetHigh = (UINT16)((UINTN)InterruptHandler >> 16);
+ IdtEntry[DEBUG_TIMER_VECTOR].Bits.OffsetUpper = (UINT32)((UINTN)InterruptHandler >> 32);
+ IdtEntry[DEBUG_TIMER_VECTOR].Bits.Selector = CodeSegment;
+ IdtEntry[DEBUG_TIMER_VECTOR].Bits.GateType = IA32_IDT_GATE_TYPE_INTERRUPT_32;
+}
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchDebugSupport.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchDebugSupport.h new file mode 100644 index 0000000000..0b25a78d13 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchDebugSupport.h @@ -0,0 +1,31 @@ +/** @file
+ X64 specific defintions for debug agent library instance.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _ARCH_DEBUG_SUPPORT_H_
+#define _ARCH_DEBUG_SUPPORT_H_
+
+#include "ArchRegisters.h"
+#include "TransferProtocol.h"
+
+typedef DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_X64 DEBUG_DATA_REPONSE_READ_REGISTER_GROUP;
+typedef DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM_X64 DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM;
+typedef DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE_X64 DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE;
+
+#define DEBUG_SW_BREAKPOINT_SYMBOL 0xcc
+
+#define DEBUG_ARCH_SYMBOL DEBUG_DATA_BREAK_CPU_ARCH_X64
+
+typedef DEBUG_DATA_X64_SYSTEM_CONTEXT DEBUG_CPU_CONTEXT;
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchReadGroupRegister.c b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchReadGroupRegister.c new file mode 100644 index 0000000000..72d30fcf53 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchReadGroupRegister.c @@ -0,0 +1,259 @@ +/** @file
+ x64 Group registers read support functions.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DebugAgent.h"
+
+/**
+ Read segment selector by register index.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterIndex Register Index.
+
+ @return Value of segment selector.
+
+**/
+UINT64
+ReadRegisterSelectorByIndex (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 RegisterIndex
+ )
+{
+ IA32_DESCRIPTOR *Ia32Descriptor;
+ IA32_GDT *Ia32Gdt;
+ UINT16 Selector;
+ UINT32 Data32;
+
+ Ia32Descriptor = (IA32_DESCRIPTOR *) CpuContext->Gdtr;
+ Ia32Gdt = (IA32_GDT *) (Ia32Descriptor->Base);
+
+ Selector = 0;
+
+ switch (RegisterIndex) {
+ case SOFT_DEBUGGER_REGISTER_CSAS:
+ Selector = (UINT16) CpuContext->Cs;
+ break;
+ case SOFT_DEBUGGER_REGISTER_SSAS:
+ Selector = (UINT16) CpuContext->Ss;
+ break;
+ case SOFT_DEBUGGER_REGISTER_GSAS:
+ Selector = (UINT16) CpuContext->Gs;
+ break;
+ case SOFT_DEBUGGER_REGISTER_FSAS:
+ Selector = (UINT16) CpuContext->Fs;
+ break;
+ case SOFT_DEBUGGER_REGISTER_ESAS:
+ Selector = (UINT16) CpuContext->Es;
+ break;
+ case SOFT_DEBUGGER_REGISTER_DSAS:
+ Selector = (UINT16) CpuContext->Ds;
+ case SOFT_DEBUGGER_REGISTER_LDTAS:
+ case SOFT_DEBUGGER_REGISTER_TSSAS:
+ return 0x00820000;
+ break;
+ }
+
+ Data32 = (UINT32) RShiftU64 (Ia32Gdt[Selector / 8].Uint64, 24);
+ return (Data32 & (UINT32)(~0xff)) | Selector;
+
+}
+
+/**
+ Read group register of Segment Base.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroupSegBase Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroupSegBase (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE *RegisterGroupSegBase
+ )
+{
+ IA32_DESCRIPTOR *Ia32Descriptor;
+ IA32_GDT *Ia32Gdt;
+ UINTN Index;
+
+ Ia32Descriptor = (IA32_DESCRIPTOR *) CpuContext->Gdtr;
+ Ia32Gdt = (IA32_GDT *) (Ia32Descriptor->Base);
+
+ Index = CpuContext->Cs / 8;
+ RegisterGroupSegBase->CsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Ss / 8;
+ RegisterGroupSegBase->SsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Gs / 8;
+ RegisterGroupSegBase->GsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Fs / 8;
+ RegisterGroupSegBase->FsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Es / 8;
+ RegisterGroupSegBase->EsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+ Index = CpuContext->Ds / 8;
+ RegisterGroupSegBase->DsBas = (Ia32Gdt[Index].Bits.BaseLow) + (Ia32Gdt[Index].Bits.BaseMid << 16) + (Ia32Gdt[Index].Bits.BaseMid << 24);
+
+ RegisterGroupSegBase->LdtBas = 0;
+ RegisterGroupSegBase->TssBas = 0;
+}
+
+/**
+ Read group register of Segment Limit.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] RegisterGroupSegLim Pointer to Group registers.
+
+**/
+VOID
+ReadRegisterGroupSegLim (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM *RegisterGroupSegLim
+ )
+{
+ IA32_DESCRIPTOR *Ia32Descriptor;
+ IA32_GDT *Ia32Gdt;
+ UINTN Index;
+
+ Ia32Descriptor = (IA32_DESCRIPTOR *) CpuContext->Gdtr;
+ Ia32Gdt = (IA32_GDT *) (Ia32Descriptor->Base);
+
+ Index = CpuContext->Cs / 8;
+ RegisterGroupSegLim->CsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->CsLim = (RegisterGroupSegLim->CsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Ss / 8;
+ RegisterGroupSegLim->SsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->SsLim = (RegisterGroupSegLim->SsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Gs / 8;
+ RegisterGroupSegLim->GsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->GsLim = (RegisterGroupSegLim->GsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Fs / 8;
+ RegisterGroupSegLim->FsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->FsLim = (RegisterGroupSegLim->FsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Es / 8;
+ RegisterGroupSegLim->EsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->EsLim = (RegisterGroupSegLim->EsLim << 12) | 0xfff;
+ }
+
+ Index = CpuContext->Ds / 8;
+ RegisterGroupSegLim->DsLim = Ia32Gdt[Index].Bits.LimitLow + (Ia32Gdt[Index].Bits.LimitHigh << 16);
+ if (Ia32Gdt[Index].Bits.Granularity == 1) {
+ RegisterGroupSegLim->DsLim = (RegisterGroupSegLim->DsLim << 12) | 0xfff;
+ }
+
+ RegisterGroupSegLim->LdtLim = 0xffff;
+ RegisterGroupSegLim->TssLim = 0xffff;
+}
+
+/**
+ Read group register by group index.
+
+ @param[in] CpuContext Pointer to saved CPU context.
+ @param[in] GroupIndex Group Index.
+
+ @retval RETURN_SUCCESS Read successfully.
+ @retval RETURN_NOT_SUPPORTED Group index cannot be supported.
+
+**/
+RETURN_STATUS
+ArchReadRegisterGroup (
+ IN DEBUG_CPU_CONTEXT *CpuContext,
+ IN UINT8 GroupIndex
+ )
+{
+ UINTN DataN;
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP RegisterGroup;
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT_BAS_LIM RegisterGroupBasLim;
+ DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT_BASES_X64 RegisterGroupBases64;
+
+ switch (GroupIndex) {
+ case SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT64:
+ ReadRegisterGroup (CpuContext, &RegisterGroup);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroup, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_BAS_LIM64:
+ DataN = (UINTN) (CpuContext->Idtr[0] & 0xffff);
+ RegisterGroupBasLim.IdtLim = DataN;
+ DataN = (UINTN) (CpuContext->Gdtr[0] & 0xffff);
+ RegisterGroupBasLim.GdtLim = DataN;
+ DataN = (UINTN) RShiftU64 (CpuContext->Idtr[0], 16);
+ DataN |= (UINTN) LShiftU64 (CpuContext->Idtr[1], sizeof (UINTN) * 8 - 16);
+ RegisterGroupBasLim.IdtBas = DataN;
+ DataN = (UINTN) RShiftU64 (CpuContext->Gdtr[0], 16);
+ DataN |= (UINTN) LShiftU64 (CpuContext->Gdtr[1], sizeof (UINTN) * 8 - 16);
+ RegisterGroupBasLim.GdtBas = DataN;
+
+ ReadRegisterGroupSegLim (CpuContext, (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM *) &RegisterGroupBasLim.CsLim);
+ ReadRegisterGroupSegBase (CpuContext, (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE *) &RegisterGroupBasLim.CsBas);
+
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroupBasLim, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT_BAS_LIM));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_GP2_64:
+ ReadRegisterGroup (CpuContext, &RegisterGroup);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroup.Eflags, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_GP2));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_GP64:
+ ReadRegisterGroup (CpuContext, &RegisterGroup);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroup.Eax, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_GP));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_DR64:
+ ReadRegisterGroup (CpuContext, &RegisterGroup);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroup.Dr0, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_DR));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_SEGMENT_BASES64:
+ RegisterGroupBases64.Ldtr = (UINT16) CpuContext->Ldtr;
+ RegisterGroupBases64.Tr = (UINT16) CpuContext->Tr;
+
+ RegisterGroupBases64.Csas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_CSAS);
+ RegisterGroupBases64.Ssas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_SSAS);
+ RegisterGroupBases64.Gsas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_GSAS);
+ RegisterGroupBases64.Fsas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_FSAS);
+ RegisterGroupBases64.Esas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_ESAS);
+ RegisterGroupBases64.Dsas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_DSAS);
+ RegisterGroupBases64.Ldtas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_LDTAS);
+ RegisterGroupBases64.Tssas = ReadRegisterSelectorByIndex (CpuContext, SOFT_DEBUGGER_REGISTER_TSSAS);
+
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroupBases64, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT_BASES_X64));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_CR64:
+ ReadRegisterGroup (CpuContext, &RegisterGroup);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroup.Dr7 + 8, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_CR));
+ break;
+
+ case SOFT_DEBUGGER_REGISTER_GROUP_XMM64:
+ ReadRegisterGroup (CpuContext, &RegisterGroup);
+ SendDataResponsePacket (CpuContext, (UINT8 *) &RegisterGroup.Dr7 + 8 * 6, (UINT16) sizeof (DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_XMM));
+ break;
+
+ default:
+ return RETURN_UNSUPPORTED;
+ }
+
+ return RETURN_SUCCESS;
+}
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchRegisters.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchRegisters.h new file mode 100644 index 0000000000..e7a5a33089 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/ArchRegisters.h @@ -0,0 +1,329 @@ +/** @file
+ X64 register defintions needed by debug transfer protocol.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _ARCH_REGISTERS_H_
+#define _ARCH_REGISTERS_H_
+
+///
+/// FXSAVE_STATE (promoted operation)
+/// FP / MMX / XMM registers (see fxrstor instruction definition)
+///
+typedef struct {
+ UINT16 Fcw;
+ UINT16 Fsw;
+ UINT16 Ftw;
+ UINT16 Opcode;
+ UINT64 Rip;
+ UINT64 DataOffset;
+ UINT32 Mxcsr;
+ UINT32 Mxcsr_Mask;
+ UINT8 St0Mm0[10];
+ UINT8 Reserved2[6];
+ UINT8 St1Mm1[10];
+ UINT8 Reserved3[6];
+ UINT8 St2Mm2[10];
+ UINT8 Reserved4[6];
+ UINT8 St3Mm3[10];
+ UINT8 Reserved5[6];
+ UINT8 St4Mm4[10];
+ UINT8 Reserved6[6];
+ UINT8 St5Mm5[10];
+ UINT8 Reserved7[6];
+ UINT8 St6Mm6[10];
+ UINT8 Reserved8[6];
+ UINT8 St7Mm7[10];
+ UINT8 Reserved9[6];
+ UINT8 Xmm0[16];
+ UINT8 Xmm1[16];
+ UINT8 Xmm2[16];
+ UINT8 Xmm3[16];
+ UINT8 Xmm4[16];
+ UINT8 Xmm5[16];
+ UINT8 Xmm6[16];
+ UINT8 Xmm7[16];
+ UINT8 Xmm8[16];
+ UINT8 Xmm9[16];
+ UINT8 Xmm10[16];
+ UINT8 Xmm11[16];
+ UINT8 Xmm12[16];
+ UINT8 Xmm13[16];
+ UINT8 Xmm14[16];
+ UINT8 Xmm15[16];
+ UINT8 Reserved11[6 * 16];
+} DEBUG_DATA_X64_FX_SAVE_STATE;
+
+///
+/// x64 processor context definition
+///
+typedef struct {
+ DEBUG_DATA_X64_FX_SAVE_STATE FxSaveState;
+ UINT64 Dr0;
+ UINT64 Dr1;
+ UINT64 Dr2;
+ UINT64 Dr3;
+ UINT64 Dr6;
+ UINT64 Dr7;
+ UINT64 Eflags;
+ UINT64 Ldtr;
+ UINT64 Tr;
+ UINT64 Gdtr[2];
+ UINT64 Idtr[2];
+ UINT64 Eip;
+ UINT64 Gs;
+ UINT64 Fs;
+ UINT64 Es;
+ UINT64 Ds;
+ UINT64 Cs;
+ UINT64 Ss;
+ UINT64 Cr0;
+ UINT64 Cr1; /* Reserved */
+ UINT64 Cr2;
+ UINT64 Cr3;
+ UINT64 Cr4;
+ UINT64 Rdi;
+ UINT64 Rsi;
+ UINT64 Rbp;
+ UINT64 Rsp;
+ UINT64 Rdx;
+ UINT64 Rcx;
+ UINT64 Rbx;
+ UINT64 Rax;
+ UINT64 Cr8;
+ UINT64 R8;
+ UINT64 R9;
+ UINT64 R10;
+ UINT64 R11;
+ UINT64 R12;
+ UINT64 R13;
+ UINT64 R14;
+ UINT64 R15;
+} DEBUG_DATA_X64_SYSTEM_CONTEXT;
+
+
+///
+/// x64 GROUP register
+///
+typedef struct {
+ UINT16 Cs;
+ UINT16 Ds;
+ UINT16 Es;
+ UINT16 Fs;
+ UINT16 Gs;
+ UINT16 Ss;
+ UINT32 Eflags;
+ UINT64 Rbp;
+ UINT64 Eip;
+ UINT64 Rsp;
+ UINT64 Eax;
+ UINT64 Rbx;
+ UINT64 Rcx;
+ UINT64 Rdx;
+ UINT64 Rsi;
+ UINT64 Rdi;
+ UINT64 R8;
+ UINT64 R9;
+ UINT64 R10;
+ UINT64 R11;
+ UINT64 R12;
+ UINT64 R13;
+ UINT64 R14;
+ UINT64 R15;
+ UINT64 Dr0;
+ UINT64 Dr1;
+ UINT64 Dr2;
+ UINT64 Dr3;
+ UINT64 Dr6;
+ UINT64 Dr7;
+ UINT64 Cr0;
+ UINT64 Cr2;
+ UINT64 Cr3;
+ UINT64 Cr4;
+ UINT64 Cr8;
+ UINT8 Xmm0[16];
+ UINT8 Xmm1[16];
+ UINT8 Xmm2[16];
+ UINT8 Xmm3[16];
+ UINT8 Xmm4[16];
+ UINT8 Xmm5[16];
+ UINT8 Xmm6[16];
+ UINT8 Xmm7[16];
+ UINT8 Xmm8[16];
+ UINT8 Xmm9[16];
+ UINT8 Xmm10[16];
+ UINT8 Xmm11[16];
+ UINT8 Xmm12[16];
+ UINT8 Xmm13[16];
+ UINT8 Xmm14[16];
+ UINT8 Xmm15[16];
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_X64;
+
+///
+/// x64 Segment Limit GROUP register
+///
+typedef struct {
+ UINT64 CsLim;
+ UINT64 SsLim;
+ UINT64 GsLim;
+ UINT64 FsLim;
+ UINT64 EsLim;
+ UINT64 DsLim;
+ UINT64 LdtLim;
+ UINT64 TssLim;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGLIM_X64;
+
+///
+/// x64 Segment Base GROUP register
+///
+typedef struct {
+ UINT64 CsBas;
+ UINT64 SsBas;
+ UINT64 GsBas;
+ UINT64 FsBas;
+ UINT64 EsBas;
+ UINT64 DsBas;
+ UINT64 LdtBas;
+ UINT64 TssBas;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGBASE_X64;
+
+///
+/// x64 Segment Base/Limit GROUP register
+///
+typedef struct {
+ UINT64 IdtBas;
+ UINT64 IdtLim;
+ UINT64 GdtBas;
+ UINT64 GdtLim;
+ UINT64 CsLim;
+ UINT64 SsLim;
+ UINT64 GsLim;
+ UINT64 FsLim;
+ UINT64 EsLim;
+ UINT64 DsLim;
+ UINT64 LdtLim;
+ UINT64 TssLim;
+ UINT64 CsBas;
+ UINT64 SsBas;
+ UINT64 GsBas;
+ UINT64 FsBas;
+ UINT64 EsBas;
+ UINT64 DsBas;
+ UINT64 LdtBas;
+ UINT64 TssBas;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT_BAS_LIM;
+
+///
+/// x64 register GROUP register
+///
+typedef struct {
+ UINT32 Eflags;
+ UINT64 Rbp;
+ UINT64 Eip;
+ UINT64 Rsp;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_GP2;
+
+///
+/// x64 general register GROUP register
+///
+typedef struct {
+ UINT64 Eax;
+ UINT64 Rbx;
+ UINT64 Rcx;
+ UINT64 Rdx;
+ UINT64 Rsi;
+ UINT64 Rdi;
+ UINT64 R8;
+ UINT64 R9;
+ UINT64 R10;
+ UINT64 R11;
+ UINT64 R12;
+ UINT64 R13;
+ UINT64 R14;
+ UINT64 R15;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_GP;
+
+///
+/// x64 Segment GROUP register
+///
+typedef struct {
+ UINT16 Cs;
+ UINT16 Ds;
+ UINT16 Es;
+ UINT16 Fs;
+ UINT16 Gs;
+ UINT16 Ss;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT;
+
+///
+/// x64 Debug Register GROUP register
+///
+typedef struct {
+ UINT64 Dr0;
+ UINT64 Dr1;
+ UINT64 Dr2;
+ UINT64 Dr3;
+ UINT64 Dr6;
+ UINT64 Dr7;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_DR;
+
+///
+/// x64 Control Register GROUP register
+///
+typedef struct {
+ UINT64 Cr0;
+ UINT64 Cr2;
+ UINT64 Cr3;
+ UINT64 Cr4;
+ UINT64 Cr8;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_CR;
+
+///
+/// x64 XMM Register GROUP register
+///
+typedef struct {
+ UINT8 Xmm0[16];
+ UINT8 Xmm1[16];
+ UINT8 Xmm2[16];
+ UINT8 Xmm3[16];
+ UINT8 Xmm4[16];
+ UINT8 Xmm5[16];
+ UINT8 Xmm6[16];
+ UINT8 Xmm7[16];
+ UINT8 Xmm8[16];
+ UINT8 Xmm9[16];
+ UINT8 Xmm10[16];
+ UINT8 Xmm11[16];
+ UINT8 Xmm12[16];
+ UINT8 Xmm13[16];
+ UINT8 Xmm14[16];
+ UINT8 Xmm15[16];
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_XMM;
+
+///
+/// x64 Segment Base GROUP register
+///
+typedef struct {
+ UINT16 Ldtr;
+ UINT16 Tr;
+ UINT64 Csas;
+ UINT64 Ssas;
+ UINT64 Gsas;
+ UINT64 Fsas;
+ UINT64 Esas;
+ UINT64 Dsas;
+ UINT64 Ldtas;
+ UINT64 Tssas;
+} DEBUG_DATA_REPONSE_READ_REGISTER_GROUP_SEGMENT_BASES_X64;
+
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/AsmFuncs.S b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/AsmFuncs.S new file mode 100644 index 0000000000..0d78e7d774 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/AsmFuncs.S @@ -0,0 +1,401 @@ +#------------------------------------------------------------------------------
+#
+# Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+# Module Name:
+#
+# AsmFuncs.S
+#
+# Abstract:
+#
+# Debug interrupt handle functions.
+#
+#------------------------------------------------------------------------------
+
+#include "DebugException.h"
+
+ASM_GLOBAL ASM_PFX(InterruptProcess)
+
+ASM_GLOBAL ASM_PFX(Exception0Handle)
+ASM_GLOBAL ASM_PFX(ExceptionStubHeaderSize)
+ASM_GLOBAL ASM_PFX(TimerInterruptHandle)
+ASM_GLOBAL ASM_PFX(CommonEntry)
+
+.data +
+ASM_PFX(ExceptionStubHeaderSize): .word ASM_PFX(Exception1Handle) - ASM_PFX(Exception0Handle) +
+
+.text
+
+ASM_PFX(Exception0Handle):
+ cli
+ pushq %rcx
+ mov $0, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception1Handle):
+ cli
+ pushq %rcx
+ mov $1, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception2Handle):
+ cli
+ pushq %rcx
+ mov $2, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception3Handle):
+ cli
+ pushq %rcx
+ mov $3, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception4Handle):
+ cli
+ pushq %rcx
+ mov $4, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception5Handle):
+ cli
+ pushq %rcx
+ mov $5, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception6Handle):
+ cli
+ pushq %rcx
+ mov $6, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception7Handle):
+ cli
+ pushq %rcx
+ mov $7, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception8Handle):
+ cli
+ pushq %rcx
+ mov $8, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception9Handle):
+ cli
+ pushq %rcx
+ mov $9, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception10Handle):
+ cli
+ pushq %rcx
+ mov $10, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception11Handle):
+ cli
+ pushq %rcx
+ mov $11, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception12Handle):
+ cli
+ pushq %rcx
+ mov $12, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception13Handle):
+ cli
+ pushq %rcx
+ mov $13, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception14Handle):
+ cli
+ pushq %rcx
+ mov $14, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception15Handle):
+ cli
+ pushq %rcx
+ mov $15, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception16Handle):
+ cli
+ pushq %rcx
+ mov $16, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception17Handle):
+ cli
+ pushq %rcx
+ mov $17, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception18Handle):
+ cli
+ pushq %rcx
+ mov $18, %rcx
+ jmp ASM_PFX(CommonEntry)
+ASM_PFX(Exception19Handle):
+ cli
+ pushq %rcx
+ mov $19, %rcx
+ jmp ASM_PFX(CommonEntry)
+
+ASM_PFX(TimerInterruptHandle):
+ cli
+ pushq %rcx
+ mov $32, %rcx
+ jmp ASM_PFX(CommonEntry)
+
+
+ASM_PFX(CommonEntry):
+
+#---------------------------------------;
+# CommonInterruptEntry ;
+#---------------------------------------;
+# The follow algorithm is used for the common interrupt routine.
+
+#
+# +---------------------+ <-- 16-byte aligned ensured by processor
+# + Old SS +
+# +---------------------+
+# + Old RSP +
+# +---------------------+
+# + RFlags +
+# +---------------------+
+# + CS +
+# +---------------------+
+# + RIP +
+# +---------------------+
+# + Error Code +
+# +---------------------+
+# + RCX / Vector Number +
+# +---------------------+
+# + RBP +
+# +---------------------+ <-- RBP, 16-byte aligned
+#
+
+# We need to determine if any extra data was pushed by the exception
+ cmpq $DEBUG_EXCEPT_DOUBLE_FAULT, %rcx
+ je NoExtrPush
+ cmpq $DEBUG_EXCEPT_INVALID_TSS, %rcx
+ je NoExtrPush
+ cmpq $DEBUG_EXCEPT_SEG_NOT_PRESENT, %rcx
+ je NoExtrPush
+ cmpq $DEBUG_EXCEPT_STACK_FAULT, %rcx
+ je NoExtrPush
+ cmpq $DEBUG_EXCEPT_GP_FAULT, %rcx
+ je NoExtrPush
+ cmpq $DEBUG_EXCEPT_PAGE_FAULT, %rcx
+ je NoExtrPush
+ cmpq $DEBUG_EXCEPT_ALIGNMENT_CHECK, %rcx
+ je NoExtrPush
+
+ pushq (%rsp)
+ movq $0, 8(%rsp)
+
+NoExtrPush:
+ #
+ # All interrupt handlers are invoked through interrupt gates, so
+ # IF flag automatically cleared at the entry point
+ pushq %rbp
+ movq %rsp, %rbp
+
+ #
+ # Since here the stack pointer is 16-byte aligned, so
+ # EFI_FX_SAVE_STATE_X64 of EFI_SYSTEM_CONTEXT_x64
+ # is 16-byte aligned
+ #
+
+## UINT64 R8, R9, R10, R11, R12, R13, R14, R15;
+ pushq %r15
+ pushq %r14
+ pushq %r13
+ pushq %r12
+ pushq %r11
+ pushq %r10
+ pushq %r9
+ pushq %r8
+
+ movq %cr8, %r8
+ pushq %r8
+
+## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax;
+ pushq %rax
+ pushq %rbx
+ pushq 8(%rbp) # original rcx
+ pushq %rdx
+ pushq 48(%rbp) # original rsp
+ pushq (%rbp) # original rbp
+ pushq %rsi
+ pushq %rdi
+
+## UINT64 Cr0, Cr1, Cr2, Cr3, Cr4;
+ movq %cr4, %rax
+ orq $0x208, %rax
+ movq %rax, %cr4
+ pushq %rax
+ movq %cr3, %rax
+ pushq %rax
+ movq %cr2, %rax
+ pushq %rax
+ xorq %rax, %rax
+ pushq %rax
+ movq %cr0, %rax
+ pushq %rax
+
+## UINT64 Gs, Fs, Es, Ds, Cs, Ss; insure high 16 bits of each is zero
+ xorq %rax, %rax # set rax to 0
+ movzwq 56(%rbp), %rax
+# movq %ss, %rax
+ pushq %rax
+ movzwq 32(%rbp), %rax
+# movq %cs, %rax
+ pushq %rax
+ movq %ds, %rax
+ pushq %rax
+ movq %es, %rax
+ pushq %rax
+ movq %fs, %rax
+ pushq %rax
+ movq %gs, %rax
+ pushq %rax
+
+## UINT64 Rip;
+ pushq 24(%rbp)
+
+## UINT64 Gdtr[2], Idtr[2];
+ subq $16, %rsp
+ sidt (%rsp)
+ subq $16, %rsp
+ sgdt (%rsp)
+
+## UINT64 Ldtr, Tr;
+ xorq %rax, %rax
+ strw %ax
+ pushq %rax
+ sldtw %ax
+ pushq %rax
+
+## UINT64 RFlags;
+ pushq 40(%rbp)
+
+## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ movq %dr7, %rax
+ pushq %rax
+## clear Dr7 while executing debugger itself
+ xorq %rax, %rax
+#debug movq %rax, %dr7
+
+ movq %dr6, %rax
+ pushq %rax
+## insure all status bits in dr6 are clear...
+ xorq %rax, %rax
+ movq %rax, %dr6
+
+ movq %dr3, %rax
+ pushq %rax
+ movq %dr2, %rax
+ pushq %rax
+ movq %dr1, %rax
+ pushq %rax
+ movq %dr0, %rax
+ pushq %rax
+
+## FX_SAVE_STATE_X64 FxSaveState;
+ subq $512, %rsp
+ movq %rsp, %rdi
+ .byte 0x0f, 0xae, 0b00000111
+
+## Clear Direction Flag
+ cld
+
+## Prepare parameter and call
+# movq 8(%rbp), %rcx
+ movq %rsp, %rdx
+ movq %rcx, %r15 # save vector in r15
+ #
+ # Per X64 calling convention, allocate maximum parameter stack space
+ # and make sure RSP is 16-byte aligned
+ #
+ subq $(4 * 8), %rsp
+ call ASM_PFX(InterruptProcess)
+ addq $(4 * 8), %rsp
+
+## FX_SAVE_STATE_X64 FxSaveState;
+
+ movq %rsp, %rsi
+ .byte 0x0f, 0xae, 0b00001110
+ addq $512, %rsp
+
+## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ popq %rax
+ movq %rax, %dr0
+ popq %rax
+ movq %rax, %dr1
+ popq %rax
+ movq %rax, %dr2
+ popq %rax
+ movq %rax, %dr3
+## skip restore of dr6. We cleared dr6 during the context save.
+ addq $8, %rsp
+ popq %rax
+ movq %rax, %dr7
+
+## UINT64 RFlags;
+ popq 40(%rbp)
+
+## UINT64 Ldtr, Tr;
+## UINT64 Gdtr[2], Idtr[2];
+## Best not let anyone mess with these particular registers...
+ addq $48, %rsp
+
+## UINT64 Rip;
+ popq 24(%rbp)
+
+## UINT64 Gs, Fs, Es, Ds, Cs, Ss;
+ popq %rax
+ # mov gs, rax ; not for gs
+ popq %rax
+ # mov fs, rax ; not for fs
+ # (X64 will not use fs and gs, so we do not restore it)
+ popq %rax
+ movw %rax, %es
+ popq %rax
+ movw %rax, %ds
+ popq 32(%rbp)
+ popq 56(%rbp)
+
+## UINT64 Cr0, Cr1, Cr2, Cr3, Cr4, Cr8;
+ popq %rax
+ movq %rax, %cr0
+ addq $8, %rsp
+ popq %rax
+ movq %rax, %cr2
+ popq %rax
+ movq %rax, %cr3
+ popq %rax
+ movq %rax, %cr4
+
+## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax;
+## UINT64 R8, R9, R10, R11, R12, R13, R14, R15;
+ popq %rdi
+ popq %rsi
+ addq $8, %rsp
+ addq $8, %rsp
+ popq %rdx
+ popq %rcx
+ popq %rbx
+ popq %rax
+
+ popq %r8
+ movq %r8, %cr8
+
+ popq %r8
+ popq %r9
+ popq %r10
+ popq %r11
+ popq %r12
+ popq %r13
+ popq %r14
+ popq %r15
+
+ movq %rbp, %rsp
+ popq %rbp
+ addq $16, %rsp
+ iretq
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/AsmFuncs.asm b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/AsmFuncs.asm new file mode 100644 index 0000000000..b712c428c8 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/AsmFuncs.asm @@ -0,0 +1,364 @@ +;------------------------------------------------------------------------------
+;
+; Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+; This program and the accompanying materials
+; are licensed and made available under the terms and conditions of the BSD License
+; which accompanies this distribution. The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php.
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+; Module Name:
+;
+; AsmFuncs.asm
+;
+; Abstract:
+;
+; Debug interrupt handle functions.
+;
+;------------------------------------------------------------------------------
+
+#include "DebugException.h"
+
+
+externdef InterruptProcess:near
+
+data SEGMENT
+
+public Exception0Handle, TimerInterruptHandle, ExceptionStubHeaderSize
+
+ExceptionStubHeaderSize dw Exception1Handle - Exception0Handle ;
+CommonEntryAddr dq CommonEntry ;
+
+.code
+
+Exception0Handle:
+ cli
+ push rcx
+ mov rcx, 0
+ jmp qword ptr [CommonEntryAddr]
+Exception1Handle:
+ cli
+ push rcx
+ mov rcx, 1
+ jmp qword ptr [CommonEntryAddr]
+Exception2Handle:
+ cli
+ push rcx
+ mov rcx, 2
+ jmp qword ptr [CommonEntryAddr]
+Exception3Handle:
+ cli
+ push rcx
+ mov rcx, 3
+ jmp qword ptr [CommonEntryAddr]
+Exception4Handle:
+ cli
+ push rcx
+ mov rcx, 4
+ jmp qword ptr [CommonEntryAddr]
+Exception5Handle:
+ cli
+ push rcx
+ mov rcx, 5
+ jmp qword ptr [CommonEntryAddr]
+Exception6Handle:
+ cli
+ push rcx
+ mov rcx, 6
+ jmp qword ptr [CommonEntryAddr]
+Exception7Handle:
+ cli
+ push rcx
+ mov rcx, 7
+ jmp qword ptr [CommonEntryAddr]
+Exception8Handle:
+ cli
+ push rcx
+ mov rcx, 8
+ jmp qword ptr [CommonEntryAddr]
+Exception9Handle:
+ cli
+ push rcx
+ mov rcx, 9
+ jmp qword ptr [CommonEntryAddr]
+Exception10Handle:
+ cli
+ push rcx
+ mov rcx, 10
+ jmp qword ptr [CommonEntryAddr]
+Exception11Handle:
+ cli
+ push rcx
+ mov rcx, 11
+ jmp qword ptr [CommonEntryAddr]
+Exception12Handle:
+ cli
+ push rcx
+ mov rcx, 12
+ jmp qword ptr [CommonEntryAddr]
+Exception13Handle:
+ cli
+ push rcx
+ mov rcx, 13
+ jmp qword ptr [CommonEntryAddr]
+Exception14Handle:
+ cli
+ push rcx
+ mov rcx, 14
+ jmp qword ptr [CommonEntryAddr]
+Exception15Handle:
+ cli
+ push rcx
+ mov rcx, 15
+ jmp qword ptr [CommonEntryAddr]
+Exception16Handle:
+ cli
+ push rcx
+ mov rcx, 16
+ jmp qword ptr [CommonEntryAddr]
+Exception17Handle:
+ cli
+ push rcx
+ mov rcx, 17
+ jmp qword ptr [CommonEntryAddr]
+Exception18Handle:
+ cli
+ push rcx
+ mov rcx, 18
+ jmp qword ptr [CommonEntryAddr]
+Exception19Handle:
+ cli
+ push rcx
+ mov rcx, 19
+ jmp qword ptr [CommonEntryAddr]
+
+TimerInterruptHandle:
+ cli
+ push rcx
+ mov rcx, 32
+ jmp qword ptr [CommonEntryAddr]
+
+CommonEntry:
+ ; We need to determine if any extra data was pushed by the exception
+ cmp rcx, DEBUG_EXCEPT_DOUBLE_FAULT
+ je NoExtrPush
+ cmp rcx, DEBUG_EXCEPT_INVALID_TSS
+ je NoExtrPush
+ cmp rcx, DEBUG_EXCEPT_SEG_NOT_PRESENT
+ je NoExtrPush
+ cmp rcx, DEBUG_EXCEPT_STACK_FAULT
+ je NoExtrPush
+ cmp rcx, DEBUG_EXCEPT_GP_FAULT
+ je NoExtrPush
+ cmp rcx, DEBUG_EXCEPT_PAGE_FAULT
+ je NoExtrPush
+ cmp rcx, DEBUG_EXCEPT_ALIGNMENT_CHECK
+ je NoExtrPush
+
+ push [rsp]
+ mov qword ptr [rsp + 8], 0
+
+NoExtrPush:
+ push rbp
+ mov rbp, rsp
+
+ ; store UINT64 r8, r9, r10, r11, r12, r13, r14, r15;
+ push r15
+ push r14
+ push r13
+ push r12
+ push r11
+ push r10
+ push r9
+ push r8
+
+ mov r8, cr8
+ push r8
+
+ ; store UINT64 Rdi, Rsi, Rbp, Rsp, Rdx, Rcx, Rbx, Rax;
+ push rax
+ push rbx
+ push qword ptr [rbp + 8] ; original rcx
+ push rdx
+ push qword ptr [rbp + 6 * 8] ; original rsp
+ push qword ptr [rbp] ; original rbp
+ push rsi
+ push rdi
+
+ ;; UINT32 Cr0, Cr1, Cr2, Cr3, Cr4;
+ ;; insure FXSAVE/FXRSTOR is enabled in CR4...
+ ;; ... while we're at it, make sure DE is also enabled...
+ mov rax, cr4
+ or rax, 208h
+ mov cr4, rax
+ push rax
+ mov rax, cr3
+ push rax
+ mov rax, cr2
+ push rax
+ push 0 ; cr0 will not saved???
+ mov rax, cr0
+ push rax
+
+ xor rax, rax
+ mov rax, Ss
+ push rax
+ mov rax, Cs
+ push rax
+ mov rax, Ds
+ push rax
+ mov rax, Es
+ push rax
+ mov rax, Fs
+ push rax
+ mov rax, Gs
+ push rax
+
+ ;; EIP
+ mov rax, [rbp + 8 * 3] ; EIP
+ push rax
+
+ ;; UINT64 Gdtr[2], Idtr[2];
+ sub rsp, 16
+ sidt fword ptr [rsp]
+ sub rsp, 16
+ sgdt fword ptr [rsp]
+
+ ;; UINT64 Ldtr, Tr;
+ xor rax, rax
+ str ax
+ push rax
+ sldt ax
+ push rax
+
+ ;; EFlags
+ mov rax, [rbp + 8 * 5]
+ push rax
+
+ ;; UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ mov rax, dr7
+ push rax
+
+ ;; clear Dr7 while executing debugger itself
+ xor rax, rax
+ mov dr7, rax
+
+ ;; Dr6
+ mov rax, dr6
+ push rax
+
+ ;; insure all status bits in dr6 are clear...
+ xor rax, rax
+ mov dr6, rax
+
+ mov rax, dr3
+ push rax
+ mov rax, dr2
+ push rax
+ mov rax, dr1
+ push rax
+ mov rax, dr0
+ push rax
+
+ sub rsp, 512
+ mov rdi, rsp
+ db 0fh, 0aeh, 00000111y ;fxsave [rdi]
+
+ ;; Clear Direction Flag
+ cld
+
+ ; call the C interrupt process function
+ mov rdx, rsp ; Structure
+ mov r15, rcx ; save vector in r15
+
+ sub rsp, 32
+ call InterruptProcess
+ add rsp, 32
+
+ mov rsi, rsp
+ db 0fh, 0aeh, 00001110y ; fxrstor [rsi]
+ add rsp, 512
+
+ ;; UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ pop rax
+ mov dr0, rax
+ pop rax
+ mov dr1, rax
+ pop rax
+ mov dr2, rax
+ pop rax
+ mov dr3, rax
+ ;; skip restore of dr6. We cleared dr6 during the context save.
+ add rsp, 8
+ pop rax
+ mov dr7, rax
+
+ ;; set EFlags
+ pop qword ptr [rbp + 8 * 5]
+
+ ;; UINT64 Ldtr, Tr;
+ ;; UINT64 Gdtr[2], Idtr[2];
+ ;; Best not let anyone mess with these particular registers...
+ add rsp, 24 * 2
+
+ ;; UINT64 Eip;
+ pop qword ptr [rbp + 8 * 3] ; set EIP in stack
+
+ ;; UINT64 Gs, Fs, Es, Ds, Cs, Ss;
+ ;; NOTE - modified segment registers could hang the debugger... We
+ ;; could attempt to insulate ourselves against this possibility,
+ ;; but that poses risks as well.
+ ;;
+ pop rax
+ pop rax
+ pop rax
+ mov es, rax
+ pop rax
+ mov ds, rax
+ pop qword ptr [rbp + 8 * 4] ; Set CS in stack
+ pop rax
+ mov ss, rax
+
+ ;; UINT64 Cr0, Cr1, Cr2, Cr3, Cr4;
+ pop rax
+ mov cr0, rax
+ add rsp, 8 ; skip for Cr1
+ pop rax
+ mov cr2, rax
+ pop rax
+ mov cr3, rax
+ pop rax
+ mov cr4, rax
+
+ ;; restore general register
+ pop rdi
+ pop rsi
+ add rsp, 8 ; skip rbp
+ add rsp, 8 ; skip rsp
+ pop rdx
+ pop rcx
+ pop rbx
+ pop rax
+
+ pop r8
+ mov cr8, r8
+
+ ; store UINT64 r8, r9, r10, r11, r12, r13, r14, r15;
+ pop r8
+ pop r9
+ pop r10
+ pop r11
+ pop r12
+ pop r13
+ pop r14
+ pop r15
+
+ mov rsp, rbp
+ pop rbp
+ add rsp, 16 ; skip rcx and error code
+
+ iretq
+
+END
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/DebugException.h b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/DebugException.h new file mode 100644 index 0000000000..13a7d23a0d --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/X64/DebugException.h @@ -0,0 +1,36 @@ +/** @file
+ Exception defintions.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DEBUG_EXCEPTION_H_
+#define _DEBUG_EXCEPTION_H_
+
+#define DEBUG_EXCEPT_DIVIDE_ERROR 0
+#define DEBUG_EXCEPT_DEBUG 1
+#define DEBUG_EXCEPT_NMI 2
+#define DEBUG_EXCEPT_BREAKPOINT 3
+#define DEBUG_EXCEPT_OVERFLOW 4
+#define DEBUG_EXCEPT_BOUND 5
+#define DEBUG_EXCEPT_INVALID_OPCODE 6
+#define DEBUG_EXCEPT_DOUBLE_FAULT 8
+#define DEBUG_EXCEPT_INVALID_TSS 10
+#define DEBUG_EXCEPT_SEG_NOT_PRESENT 11
+#define DEBUG_EXCEPT_STACK_FAULT 12
+#define DEBUG_EXCEPT_GP_FAULT 13
+#define DEBUG_EXCEPT_PAGE_FAULT 14
+#define DEBUG_EXCEPT_FP_ERROR 16
+#define DEBUG_EXCEPT_ALIGNMENT_CHECK 17
+#define DEBUG_EXCEPT_MACHINE_CHECK 18
+#define DEBUG_EXCEPT_SIMD 19
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgent/DxeDebugAgentLib.c b/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgent/DxeDebugAgentLib.c new file mode 100644 index 0000000000..cc49dc0a59 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgent/DxeDebugAgentLib.c @@ -0,0 +1,247 @@ +/** @file
+ Debug Agent library implementition for Dxe Core and Dxr modules.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DxeDebugAgentLib.h"
+
+DEBUG_AGENT_MAILBOX mMailbox;
+
+DEBUG_AGENT_MAILBOX *mMailboxPointer;
+
+IA32_IDT_GATE_DESCRIPTOR mIdtEntryTable[33];
+
+BOOLEAN mConfigurationTableNeeded = FALSE;
+
+CONST BOOLEAN MultiProcessorDebugSupport = TRUE;
+
+/**
+ Constructor allocates the NVS memory to store Mailbox and install configuration table
+ in system table to store its pointer.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval RETURN_SUCCESS Allocate the global memory space to store guid and function tables.
+ @retval RETURN_OUT_OF_RESOURCES No enough memory to allocated.
+
+**/
+RETURN_STATUS
+EFIAPI
+DxeDebugAgentLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS Address;
+
+ if (!mConfigurationTableNeeded) {
+ return RETURN_SUCCESS;
+ }
+
+ Address = 0;
+ Status = gBS->AllocatePages (
+ AllocateAnyPages,
+ EfiACPIMemoryNVS,
+ EFI_SIZE_TO_PAGES (sizeof (DEBUG_AGENT_MAILBOX)),
+ &Address
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ CopyMem (
+ (UINT8 *) (UINTN) Address,
+ (UINT8 *) (UINTN) mMailboxPointer,
+ sizeof (DEBUG_AGENT_MAILBOX)
+ );
+
+ mMailboxPointer = (DEBUG_AGENT_MAILBOX *) (UINTN) Address;
+
+ return gBS->InstallConfigurationTable (&gEfiDebugAgentGuid, (VOID *) mMailboxPointer);
+}
+
+/**
+ Get the pointer to Mailbox from the GUIDed HOB.
+
+ @param[in] HobStart The starting HOB pointer to search from.
+
+ @return Pointer to Mailbox.
+
+**/
+DEBUG_AGENT_MAILBOX *
+GetMailboxFromHob (
+ IN VOID *HobStart
+ )
+{
+ EFI_HOB_GUID_TYPE *GuidHob;
+
+ GuidHob = GetNextGuidHob (&gEfiDebugAgentGuid, HobStart);
+ if (GuidHob == NULL) {
+ return NULL;
+ }
+
+ return (DEBUG_AGENT_MAILBOX *) (GET_GUID_HOB_DATA(GuidHob));
+}
+
+/**
+ Get Debug Agent Mailbox pointer.
+
+ @return Mailbox pointer.
+
+**/
+DEBUG_AGENT_MAILBOX *
+GetMailboxPointer (
+ VOID
+ )
+{
+ return mMailboxPointer;
+}
+
+/**
+ Get debug port handle.
+
+ @return Debug port handle.
+
+**/
+DEBUG_PORT_HANDLE
+GetDebugPortHandle (
+ VOID
+ )
+{
+ return (DEBUG_PORT_HANDLE) (UINTN)(mMailboxPointer->DebugPortHandle);
+}
+
+
+/**
+ Initialize debug agent.
+
+ This function is used to set up debug enviroment for DXE phase.
+
+ If this function is called by DXE Core, Context must be the pointer
+ to HOB list which will be used to get GUIDed HOB. It will enable
+ interrupt to support break-in feature.
+ If this function is called by DXE module, Context must be NULL. It
+ will enable interrupt to support break-in feature.
+
+ @param[in] InitFlag Init flag is used to decide initialize process.
+ @param[in] Context Context needed according to InitFlag.
+ @param[in] Function Continue function called by debug agent library; it was
+ optional.
+
+**/
+VOID
+EFIAPI
+InitializeDebugAgent (
+ IN UINT32 InitFlag,
+ IN VOID *Context, OPTIONAL
+ IN DEBUG_AGENT_CONTINUE Function OPTIONAL
+ )
+{
+ DEBUG_AGENT_MAILBOX *Mailbox;
+ IA32_DESCRIPTOR Idtr;
+ UINT16 IdtEntryCount;
+ BOOLEAN InterruptStatus;
+
+ if (InitFlag != DEBUG_AGENT_INIT_DXE_CORE &&
+ InitFlag != DEBUG_AGENT_INIT_S3 &&
+ InitFlag != DEBUG_AGENT_INIT_DXE_AP) {
+ return;
+ }
+
+ //
+ // Save and disable original interrupt status
+ //
+ InterruptStatus = SaveAndDisableInterrupts ();
+
+ if (InitFlag == DEBUG_AGENT_INIT_DXE_CORE) {
+ //
+ // Try to get Mailbox from GUIDed HOB.
+ //
+ mConfigurationTableNeeded = TRUE;
+ Mailbox = GetMailboxFromHob (Context);
+
+ } else if (InitFlag == DEBUG_AGENT_INIT_DXE_AP) {
+
+ EnableInterrupts ();
+
+ return;
+
+ } else {
+ //
+ // If it is in S3 path, needn't to install configuration table.
+ //
+ Mailbox = NULL;
+ }
+
+ if (Mailbox != NULL) {
+ //
+ // If Mailbox exists, copy it into one global variable.
+ //
+ CopyMem (&mMailbox, Mailbox, sizeof (DEBUG_AGENT_MAILBOX));
+ mMailbox.DebugPortHandle = 0;
+ } else {
+ //
+ // If Mailbox not exists, used the local Mailbox.
+ //
+ ZeroMem (&mMailbox, sizeof (DEBUG_AGENT_MAILBOX));
+ }
+
+ mMailboxPointer = &mMailbox;
+
+ //
+ // Get original IDT address and size.
+ //
+ AsmReadIdtr ((IA32_DESCRIPTOR *) &Idtr);
+ IdtEntryCount = (UINT16) ((Idtr.Limit + 1) / sizeof (IA32_IDT_GATE_DESCRIPTOR));
+ if (IdtEntryCount < 33) {
+ Idtr.Limit = (UINT16) (sizeof (IA32_IDT_GATE_DESCRIPTOR) * 33 - 1);
+ Idtr.Base = (UINTN) &mIdtEntryTable;
+ AsmWriteIdtr ((IA32_DESCRIPTOR *) &Idtr);
+ }
+
+ //
+ // Initialize the IDT table entries to support source level debug.
+ //
+ InitializeDebugIdt ();
+
+ //
+ // Initialize debug communication port
+ //
+ mMailboxPointer->DebugPortHandle = (UINT64) (UINTN)DebugPortInitialize (NULL, NULL);
+
+ InitializeSpinLock (&mDebugMpContext.MpContextSpinLock);
+ InitializeSpinLock (&mDebugMpContext.DebugPortSpinLock);
+
+ if (InitFlag == DEBUG_AGENT_INIT_DXE_CORE) {
+ //
+ // Initialize Debug Timer hardware and enable interrupt.
+ //
+ InitializeDebugTimer ();
+ EnableInterrupts ();
+
+ return;
+ } else {
+ //
+ // Disable Debug Timer interrupt in S3 path.
+ //
+ SaveAndSetDebugTimerInterrupt (FALSE);
+
+ //
+ // Restore interrupt state.
+ //
+ SetInterruptState (InterruptStatus);
+ }
+
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgent/DxeDebugAgentLib.h b/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgent/DxeDebugAgentLib.h new file mode 100644 index 0000000000..7d78c5183b --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgent/DxeDebugAgentLib.h @@ -0,0 +1,25 @@ +/** @file
+ Header file for Dxe Core Debug Agent Library instance.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DXE_CORE_DEBUG_AGENT_LIB_H_
+#define _DXE_CORE_DEBUG_AGENT_LIB_H_
+
+#include <PiDxe.h>
+
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include "DebugAgent.h"
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf b/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf new file mode 100644 index 0000000000..b932437258 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf @@ -0,0 +1,87 @@ +## @file
+# Debug Agent library instance for Dxe Core and Dxe modules.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DxeDebugAgentLib
+ FILE_GUID = BA6BAD25-B814-4747-B0B0-0FBB61D40B90
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 0.7
+ LIBRARY_CLASS = DebugAgentLib|DXE_CORE DXE_DRIVER
+
+ CONSTRUCTOR = DxeDebugAgentLibConstructor
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources.common]
+ DxeDebugAgent/DxeDebugAgentLib.c
+ DxeDebugAgent/DxeDebugAgentLib.h
+ DebugAgentCommon/DebugAgent.c
+ DebugAgentCommon/DebugAgent.h
+ DebugAgentCommon/DebugTimer.c
+ DebugAgentCommon/DebugTimer.h
+ DebugAgentCommon/DebugMp.c
+ DebugAgentCommon/DebugMp.h
+
+[Sources.Ia32]
+ DebugAgentCommon/Ia32/AsmFuncs.S | GCC
+ DebugAgentCommon/Ia32/AsmFuncs.asm | MSFT
+ DebugAgentCommon/Ia32/ArchDebugSupport.h
+ DebugAgentCommon/Ia32/ArchDebugSupport.c
+ DebugAgentCommon/Ia32/ArchReadGroupRegister.c
+ DebugAgentCommon/Ia32/ArchRegisters.h
+ DebugAgentCommon/Ia32/DebugException.h
+
+[Sources.X64]
+ DebugAgentCommon/X64/AsmFuncs.S | GCC
+ DebugAgentCommon/X64/AsmFuncs.asm | MSFT
+ DebugAgentCommon/X64/ArchDebugSupport.h
+ DebugAgentCommon/X64/ArchDebugSupport.c
+ DebugAgentCommon/X64/ArchReadGroupRegister.c
+ DebugAgentCommon/X64/ArchRegisters.h
+ DebugAgentCommon/X64/DebugException.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ ResetSystemLib
+ IoLib
+ HobLib
+ DebugCommunicationLib
+ UefiBootServicesTableLib
+ UefiLib
+ PcdLib
+ SynchronizationLib
+ MemoryAllocationLib
+ LocalApicLib
+
+[Guids]
+ gEfiDebugAgentGuid ## PRODUCES ## Configuration Table
+ gEfiDebugAgentGuid ## CONSUMES ## HOB
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdFSBClock ## CONSUMES
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdExceptionsIgnoredByDebugger ## CONSUMES
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgent/SecPeiDebugAgentLib.c b/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgent/SecPeiDebugAgentLib.c new file mode 100644 index 0000000000..0d4169ccc7 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgent/SecPeiDebugAgentLib.c @@ -0,0 +1,307 @@ +/** @file
+ SEC Core Debug Agent Library instance implementition.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SecPeiDebugAgentLib.h"
+
+CONST BOOLEAN MultiProcessorDebugSupport = FALSE;
+
+/**
+ Get pointer to Mailbox from IDT entry before memory is ready.
+
+**/
+VOID *
+GetMailboxPointerInIdtEntry (
+ VOID
+ )
+{
+ IA32_IDT_GATE_DESCRIPTOR *IdtEntry;
+ IA32_DESCRIPTOR IdtDescriptor;
+ UINTN Mailbox;
+
+ AsmReadIdtr (&IdtDescriptor);
+ IdtEntry = (IA32_IDT_GATE_DESCRIPTOR *) IdtDescriptor.Base;
+
+ Mailbox = IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetLow + (IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetHigh << 16);
+ return (VOID *) Mailbox;
+}
+
+/**
+ Set the pointer of Mailbox into IDT entry before memory is ready.
+
+ @param[in] Mailbox The pointer of Mailbox.
+
+**/
+VOID
+SetMailboxPointerInIdtEntry (
+ IN VOID *Mailbox
+ )
+{
+ IA32_IDT_GATE_DESCRIPTOR *IdtEntry;
+ IA32_DESCRIPTOR IdtDescriptor;
+
+ AsmReadIdtr (&IdtDescriptor);
+ IdtEntry = (IA32_IDT_GATE_DESCRIPTOR *) IdtDescriptor.Base;
+
+ IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetLow = (UINT16)(UINTN)Mailbox;
+ IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetHigh = (UINT16)((UINTN)Mailbox >> 16);
+}
+
+/**
+ Get the pointer to Mailbox from IDT entry and build the Mailbox into GUIDed Hob
+ after memory is ready.
+
+ @return Pointer to Mailbox.
+
+**/
+DEBUG_AGENT_MAILBOX *
+BuildMailboxHob (
+ VOID
+ )
+{
+ DEBUG_AGENT_MAILBOX *Mailbox;
+
+ Mailbox = (DEBUG_AGENT_MAILBOX *) GetMailboxPointerInIdtEntry ();
+
+ return BuildGuidDataHob (
+ &gEfiDebugAgentGuid,
+ Mailbox,
+ sizeof (DEBUG_AGENT_MAILBOX)
+ );
+}
+
+/**
+ Get Debug Agent Mailbox pointer.
+
+ @return Mailbox pointer.
+
+**/
+DEBUG_AGENT_MAILBOX *
+GetMailboxPointer (
+ VOID
+ )
+{
+ return (DEBUG_AGENT_MAILBOX *) GetMailboxPointerInIdtEntry ();
+}
+
+/**
+ Get debug port handle.
+
+ @return Debug port handle.
+
+**/
+DEBUG_PORT_HANDLE
+GetDebugPortHandle (
+ VOID
+ )
+{
+ DEBUG_AGENT_MAILBOX *DebugAgentMailbox;
+
+ DebugAgentMailbox = (DEBUG_AGENT_MAILBOX *)GetMailboxPointerInIdtEntry ();
+
+ return (DEBUG_PORT_HANDLE) (UINTN)(DebugAgentMailbox->DebugPortHandle);
+}
+
+/**
+ Trigger one software interrupt to debug agent to handle it.
+
+ @param Signature Software interrupt signature.
+
+**/
+VOID
+TriggerSoftInterrupt (
+ UINT32 Signature
+ )
+{
+ UINTN Dr0;
+ UINTN Dr1;
+
+ //
+ // Save Debug Register State
+ //
+ Dr0 = AsmReadDr0 ();
+ Dr1 = AsmReadDr1 ();
+
+ //
+ // DR0 = Signature
+ //
+ AsmWriteDr0 (SOFT_INTERRUPT_SIGNATURE);
+ AsmWriteDr1 (Signature);
+
+ //
+ // Do INT3 to communicate with HOST side
+ //
+ CpuBreakpoint ();
+
+ //
+ // Restore Debug Register State only when Host didn't change it inside exception handler.
+ // Dr registers can only be changed by setting the HW breakpoint.
+ //
+ AsmWriteDr0 (Dr0);
+ AsmWriteDr1 (Dr1);
+
+}
+
+/**
+ Initialize debug agent.
+
+ This function is used to set up debug environment for SEC and PEI phase.
+
+ If InitFlag is DEBUG_AGENT_INIT_PREMEM_SEC, it will overirde IDT table entries
+ and initialize debug port. It will enable interrupt to support break-in feature.
+ It will set up debug agent Mailbox in cache-as-ramfrom. It will be called before
+ physical memory is ready.
+ If InitFlag is DEBUG_AGENT_INIT_POSTMEM_SEC, debug agent will build one GUIDed
+ HOB to copy debug agent Mailbox. It will be called after physical memory is ready.
+
+ This function is used to set up debug environment to support source level debugging.
+ If certain Debug Agent Library instance has to save some private data in the stack,
+ this function must work on the mode that doesn't return to the caller, then
+ the caller needs to wrap up all rest of logic after InitializeDebugAgent() into one
+ function and pass it into InitializeDebugAgent(). InitializeDebugAgent() is
+ responsible to invoke the passing-in function at the end of InitializeDebugAgent().
+
+ If the parameter Function is not NULL, Debug Agent Libary instance will invoke it by
+ passing in the Context to be its parameter.
+
+ If Function() is NULL, Debug Agent Library instance will return after setup debug
+ environment.
+
+ @param[in] InitFlag Init flag is used to decide the initialize process.
+ @param[in] Context Context needed according to InitFlag; it was optional.
+ @param[in] Function Continue function called by debug agent library; it was
+ optional.
+
+**/
+VOID
+EFIAPI
+InitializeDebugAgent (
+ IN UINT32 InitFlag,
+ IN VOID *Context, OPTIONAL
+ IN DEBUG_AGENT_CONTINUE Function OPTIONAL
+ )
+{
+ DEBUG_AGENT_MAILBOX *Mailbox;
+ DEBUG_AGENT_MAILBOX MailboxInStack;
+ DEBUG_AGENT_PHASE2_CONTEXT Phase2Context;
+ DEBUG_AGENT_CONTEXT_POSTMEM_SEC *DebugAgentContext;
+
+ if (InitFlag != DEBUG_AGENT_INIT_PREMEM_SEC &&
+ InitFlag != DEBUG_AGENT_INIT_POSTMEM_SEC) {
+ return;
+ }
+
+ DisableInterrupts ();
+
+ if (InitFlag == DEBUG_AGENT_INIT_POSTMEM_SEC) {
+
+ //
+ // Memory has been ready
+ //
+ if (IsHostConnected()) {
+ //
+ // Trigger one software interrupt to inform HOST
+ //
+ TriggerSoftInterrupt (MEMORY_READY_SIGNATURE);
+ }
+
+ DebugAgentContext = (DEBUG_AGENT_CONTEXT_POSTMEM_SEC *) Context;
+
+ Mailbox = (DEBUG_AGENT_MAILBOX *) GetMailboxPointerInIdtEntry ();
+ Mailbox->DebugPortHandle = Mailbox->DebugPortHandle + DebugAgentContext->StackMigrateOffset;
+
+ Mailbox = BuildMailboxHob ();
+ Mailbox = (DEBUG_AGENT_MAILBOX *) ((UINTN) Mailbox + DebugAgentContext->HeapMigrateOffset);
+
+ SetMailboxPointerInIdtEntry ((VOID *) Mailbox);
+
+ EnableInterrupts ();
+
+ if (Function != NULL) {
+ Function (Context);
+ }
+
+ return;
+
+ } else {
+
+ InitializeDebugIdt ();
+
+ Mailbox = &MailboxInStack;
+ ZeroMem ((VOID *) Mailbox, sizeof (DEBUG_AGENT_MAILBOX));
+
+ //
+ // Get and save debug port handle and set the length of memory block.
+ //
+ SetMailboxPointerInIdtEntry ((VOID *) Mailbox);
+
+ InitializeDebugTimer ();
+
+ Phase2Context.Context = Context;
+ Phase2Context.Function = Function;
+ DebugPortInitialize ((VOID *) &Phase2Context, InitializeDebugAgentPhase2);
+
+ return;
+ }
+}
+
+/**
+ Caller provided function to be invoked at the end of DebugPortInitialize().
+
+ Refer to the descrption for DebugPortInitialize() for more details.
+
+ @param[in] Context The first input argument of DebugPortInitialize().
+ @param[in] DebugPortHandle Debug port handle created by Debug Communication Libary.
+
+**/
+VOID
+EFIAPI
+InitializeDebugAgentPhase2 (
+ IN VOID *Context,
+ IN DEBUG_PORT_HANDLE DebugPortHandle
+ )
+{
+ DEBUG_AGENT_PHASE2_CONTEXT *Phase2Context;
+ DEBUG_AGENT_MAILBOX *Mailbox;
+ EFI_SEC_PEI_HAND_OFF *SecCoreData;
+
+ Mailbox = GetMailboxPointerInIdtEntry ();
+ Mailbox->DebugPortHandle = (UINT64) (UINTN)DebugPortHandle;
+
+ //
+ // Trigger one software interrupt to inform HOST
+ //
+ TriggerSoftInterrupt (SYSTEM_RESET_SIGNATURE);
+
+ //
+ // If Temporary RAM region is below 128 MB, then send message to
+ // host to disable low memory filtering.
+ //
+ Phase2Context = (DEBUG_AGENT_PHASE2_CONTEXT *) Context;
+ SecCoreData = (EFI_SEC_PEI_HAND_OFF *)Phase2Context->Context;
+ if ((UINTN)SecCoreData->TemporaryRamBase < BASE_128MB) {
+ TriggerSoftInterrupt (MEMORY_READY_SIGNATURE);
+ }
+
+ //
+ // Enable CPU interrupts so debug timer interrupts can be delivered
+ //
+ EnableInterrupts ();
+
+ //
+ // Call continuation function is it is not NULL.
+ //
+ if (Phase2Context->Function != NULL) {
+ Phase2Context->Function (Phase2Context->Context);
+ }
+}
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgent/SecPeiDebugAgentLib.h b/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgent/SecPeiDebugAgentLib.h new file mode 100644 index 0000000000..9ca5e87fb3 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgent/SecPeiDebugAgentLib.h @@ -0,0 +1,28 @@ +/** @file
+ Header file for Sec Core Debug Agent Library instance.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SEC_CORE_DEBUG_AGENT_LIB_H_
+#define _SEC_CORE_DEBUG_AGENT_LIB_H_
+
+#include <PiPei.h>
+
+#include "DebugAgent.h"
+
+typedef struct {
+ VOID *Context;
+ DEBUG_AGENT_CONTINUE Function;
+} DEBUG_AGENT_PHASE2_CONTEXT;
+
+#endif
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgentLib.inf b/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgentLib.inf new file mode 100644 index 0000000000..e2b8ad60af --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgentLib.inf @@ -0,0 +1,81 @@ +## @file
+# Debug Agent library instance for SEC Core and PEI modules.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SecPeiDebugAgentLib
+ FILE_GUID = 508B7D59-CD4E-4a6b-A45B-6D3B2D90111E
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 0.7
+ LIBRARY_CLASS = DebugAgentLib|SEC PEIM
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources.common]
+ SecPeiDebugAgent/SecPeiDebugAgentLib.c
+ SecPeiDebugAgent/SecPeiDebugAgentLib.h
+ DebugAgentCommon/DebugAgent.c
+ DebugAgentCommon/DebugAgent.h
+ DebugAgentCommon/DebugTimer.c
+ DebugAgentCommon/DebugTimer.h
+ DebugAgentCommon/DebugMp.c
+ DebugAgentCommon/DebugMp.h
+
+[Sources.Ia32]
+ DebugAgentCommon/Ia32/AsmFuncs.S | GCC
+ DebugAgentCommon/Ia32/AsmFuncs.asm | MSFT
+ DebugAgentCommon/Ia32/ArchDebugSupport.h
+ DebugAgentCommon/Ia32/ArchDebugSupport.c
+ DebugAgentCommon/Ia32/ArchReadGroupRegister.c
+ DebugAgentCommon/Ia32/ArchRegisters.h
+ DebugAgentCommon/Ia32/DebugException.h
+
+[Sources.X64]
+ DebugAgentCommon/X64/AsmFuncs.S | GCC
+ DebugAgentCommon/X64/AsmFuncs.asm | MSFT
+ DebugAgentCommon/X64/ArchDebugSupport.h
+ DebugAgentCommon/X64/ArchDebugSupport.c
+ DebugAgentCommon/X64/ArchReadGroupRegister.c
+ DebugAgentCommon/X64/ArchRegisters.h
+ DebugAgentCommon/X64/DebugException.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ ResetSystemLib
+ IoLib
+ HobLib
+ PcdLib
+ DebugCommunicationLib
+ SynchronizationLib
+ LocalApicLib
+
+[Guids]
+ gEfiDebugAgentGuid ## PRODUCES ## HOB
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdFSBClock ## CONSUMES
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdExceptionsIgnoredByDebugger ## CONSUMES
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgent/SmmDebugAgentLib.c b/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgent/SmmDebugAgentLib.c new file mode 100644 index 0000000000..fa42311659 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgent/SmmDebugAgentLib.c @@ -0,0 +1,157 @@ +/** @file
+ Debug Agent library implementition.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SmmDebugAgentLib.h"
+
+DEBUG_AGENT_MAILBOX *mMailboxPointer = NULL;
+
+GLOBAL_REMOVE_IF_UNREFERENCED DEBUG_AGENT_MAILBOX mLocalMailbox;
+
+GLOBAL_REMOVE_IF_UNREFERENCED UINTN mSavedDebugRegisters[6];
+
+CONST BOOLEAN MultiProcessorDebugSupport = FALSE;
+
+
+/**
+ Get Debug Agent Mailbox pointer.
+
+ @return Mailbox pointer.
+
+**/
+DEBUG_AGENT_MAILBOX *
+GetMailboxPointer (
+ VOID
+ )
+{
+ return mMailboxPointer;
+}
+
+/**
+ Get debug port handle.
+
+ @return Debug port handle.
+
+**/
+DEBUG_PORT_HANDLE
+GetDebugPortHandle (
+ VOID
+ )
+{
+ return (DEBUG_PORT_HANDLE) (UINTN)(mMailboxPointer->DebugPortHandle);
+}
+
+/**
+ Store debug register when SMI exit.
+
+**/
+VOID
+SaveDebugRegister (
+ VOID
+ )
+{
+ mSavedDebugRegisters[0] = AsmReadDr0 ();
+ mSavedDebugRegisters[1] = AsmReadDr1 ();
+ mSavedDebugRegisters[2] = AsmReadDr2 ();
+ mSavedDebugRegisters[3] = AsmReadDr3 ();
+ mSavedDebugRegisters[4] = AsmReadDr6 ();
+ mSavedDebugRegisters[5] = AsmReadDr7 ();
+}
+
+/**
+ Restore debug register when SMI exit.
+
+**/
+VOID
+RestoreDebugRegister (
+ VOID
+ )
+{
+ AsmWriteDr7 (0);
+ AsmWriteDr0 (mSavedDebugRegisters[0]);
+ AsmWriteDr1 (mSavedDebugRegisters[1]);
+ AsmWriteDr2 (mSavedDebugRegisters[2]);
+ AsmWriteDr3 (mSavedDebugRegisters[3]);
+ AsmWriteDr6 (mSavedDebugRegisters[4]);
+ AsmWriteDr7 (mSavedDebugRegisters[5]);
+}
+
+/**
+ Initialize debug agent.
+
+ This function is used to set up debug enviroment for source level debug
+ in SMM code.
+
+ If InitFlag is DEBUG_AGENT_INIT_SMM, it will overirde IDT table entries
+ and initialize debug port. It will get debug agent Mailbox from GUIDed HOB,
+ it it exists, debug agent wiil copied it into the local Mailbox in SMM space.
+ it will overirde IDT table entries and initialize debug port. Context will be
+ NULL.
+ If InitFlag is DEBUG_AGENT_INIT_ENTER_SMI, debug agent will save Debug
+ Registers and get local Mailbox in SMM space. Context will be NULL.
+ If InitFlag is DEBUG_AGENT_INIT_EXIT_SMI, debug agent will restore Debug
+ Registers. Context will be NULL.
+
+ @param[in] InitFlag Init flag is used to decide initialize process.
+ @param[in] Context Context needed according to InitFlag.
+ @param[in] Function Continue function called by debug agent library; it was
+ optional.
+
+**/
+VOID
+EFIAPI
+InitializeDebugAgent (
+ IN UINT32 InitFlag,
+ IN VOID *Context, OPTIONAL
+ IN DEBUG_AGENT_CONTINUE Function OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ UINT64 DebugPortHandle;
+
+ switch (InitFlag) {
+ case DEBUG_AGENT_INIT_SMM:
+ Status = EfiGetSystemConfigurationTable (&gEfiDebugAgentGuid, (VOID **) &mMailboxPointer);
+ if (EFI_ERROR (Status) || mMailboxPointer == NULL) {
+ ZeroMem (&mLocalMailbox, sizeof (DEBUG_AGENT_MAILBOX));
+ mMailboxPointer = &mLocalMailbox;
+ }
+
+ break;
+
+ case DEBUG_AGENT_INIT_ENTER_SMI:
+ SaveDebugRegister ();
+ InitializeDebugIdt ();
+
+ if (mMailboxPointer != NULL) {
+ //
+ // Initialize debug communication port
+ //
+ DebugPortHandle = (UINT64) (UINTN)DebugPortInitialize ((DEBUG_PORT_HANDLE) (UINTN)mMailboxPointer->DebugPortHandle, NULL);
+ mMailboxPointer->DebugPortHandle = DebugPortHandle;
+
+ if (mMailboxPointer->DebugFlag.Bits.BreakOnNextSmi == 1) {
+ //
+ // If SMM entry break is set, SMM code will be break at here.
+ //
+ CpuBreakpoint ();
+ }
+ }
+ break;
+
+ case DEBUG_AGENT_INIT_EXIT_SMI:
+ RestoreDebugRegister ();
+ break;
+ }
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgent/SmmDebugAgentLib.h b/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgent/SmmDebugAgentLib.h new file mode 100644 index 0000000000..ccb55f830d --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgent/SmmDebugAgentLib.h @@ -0,0 +1,24 @@ +/** @file
+ Header file for Smm Debug Agent Library instance.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SMM_DEBUG_AGENT_LIB_H_
+#define _SMM_DEBUG_AGENT_LIB_H_
+
+#include <PiDxe.h>
+
+#include <Library/UefiLib.h>
+
+#include "DebugAgent.h"
+
+#endif
diff --git a/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgentLib.inf b/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgentLib.inf new file mode 100644 index 0000000000..9dfdec1d32 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgentLib.inf @@ -0,0 +1,81 @@ +## @file
+# Debug Agent library instance for SMM modules.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SecDebugAgentLib
+ FILE_GUID = CB07D74C-598F-4268-A5D1-644FB4A481E8
+ MODULE_TYPE = DXE_SMM_DRIVER
+ VERSION_STRING = 0.7
+ LIBRARY_CLASS = DebugAgentLib|DXE_SMM_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources.common]
+ SmmDebugAgent/SmmDebugAgentLib.c
+ SmmDebugAgent/SmmDebugAgentLib.h
+ DebugAgentCommon/DebugAgent.c
+ DebugAgentCommon/DebugAgent.h
+ DebugAgentCommon/DebugTimer.c
+ DebugAgentCommon/DebugTimer.h
+ DebugAgentCommon/DebugMp.c
+ DebugAgentCommon/DebugMp.h
+
+[Sources.Ia32]
+ DebugAgentCommon/Ia32/AsmFuncs.S | GCC
+ DebugAgentCommon/Ia32/AsmFuncs.asm | MSFT
+ DebugAgentCommon/Ia32/ArchDebugSupport.h
+ DebugAgentCommon/Ia32/ArchDebugSupport.c
+ DebugAgentCommon/Ia32/ArchReadGroupRegister.c
+ DebugAgentCommon/Ia32/ArchRegisters.h
+ DebugAgentCommon/Ia32/DebugException.h
+
+[Sources.X64]
+ DebugAgentCommon/X64/AsmFuncs.S | GCC
+ DebugAgentCommon/X64/AsmFuncs.asm | MSFT
+ DebugAgentCommon/X64/ArchDebugSupport.h
+ DebugAgentCommon/X64/ArchDebugSupport.c
+ DebugAgentCommon/X64/ArchReadGroupRegister.c
+ DebugAgentCommon/X64/ArchRegisters.h
+ DebugAgentCommon/X64/DebugException.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ ResetSystemLib
+ IoLib
+ DebugCommunicationLib
+ UefiLib
+ PcdLib
+ SynchronizationLib
+ LocalApicLib
+
+[Guids]
+ gEfiDebugAgentGuid ## CONSUMES ## Configuration Table
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdFSBClock ## CONSUMES
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdExceptionsIgnoredByDebugger ## CONSUMES
+
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.c b/SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.c new file mode 100644 index 0000000000..ed1a35bd96 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.c @@ -0,0 +1,169 @@ +/** @file
+ Debug Port Library implementation based on serial port.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+
+#include <Library/DebugCommunicationLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/TimerLib.h>
+
+/**
+ Initialize the debug port.
+
+ This function will initialize debug port to get it ready for data transmition. If
+ certain Debug Communication Library instance has to save some private data in the
+ stack, this function must work on the mode that doesn't return to the caller, then
+ the caller needs to wrap up all rest of logic after DebugPortInitialize() into one
+ function and pass it into DebugPortInitialize(). DebugPortInitialize() is
+ responsible to invoke the passing-in funciton at the end of DebugPortInitialize().
+
+ If the paramter Function is not NULL, Debug Communication Libary instance will
+ invoke it by passing in the Context to be the first parameter. Debug Communication
+ Library instance could create one debug port handle to be the second parameter
+ passing into the Function. Debug Communication Library instance also could pass
+ NULL to be the second parameter if it doesn't create the debug port handle.
+
+ If the parameter Function is NULL, and Context is not NULL. At this time, Context
+ is the debug port handle created by the previous Debug Communication Library
+ instance.
+ a) If the instance can understand and continue use the private data of the previous
+ instance, it could return the same handle as passed in (as Context parameter).
+ b) If the instance does not understand, or does not want to continue use the
+ private data of the previous instance, it could ignore the input Context parameter
+ and create the new hanlde to be returned.
+
+ If Function() is NULL and Context is NULL, Debug Communication Library could create a
+ new handle and return it. NULL is also a valid handle to be returned.
+
+ @param[in] Context Context needed by callback function; it was optional.
+ @param[in] Function Continue function called by Debug Communication library;
+ it was optional.
+
+ @return The debug port handle created by Debug Communication Library if Function
+ is not NULL.
+
+**/
+DEBUG_PORT_HANDLE
+EFIAPI
+DebugPortInitialize (
+ IN VOID *Context,
+ IN DEBUG_PORT_CONTINUE Function
+ )
+{
+ SerialPortInitialize ();
+
+ if (Function != NULL) {
+ Function (Context, NULL);
+ }
+
+ return NULL;
+}
+
+/**
+ Read data from debug device and save the datas in buffer.
+
+ Reads NumberOfBytes data bytes from a debug device into the buffer
+ specified by Buffer. The number of bytes actually read is returned.
+ If the return value is less than NumberOfBytes, then the rest operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to store the data read from the debug device.
+ @param NumberOfBytes Number of bytes which will be read.
+ @param Timeout Timeout value for reading from debug device. It unit is Microsecond.
+
+ @retval 0 Read data failed, no data is to be read.
+ @retval >0 Actual number of bytes read from debug device.
+
+**/
+UINTN
+EFIAPI
+DebugPortReadBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes,
+ IN UINTN Timeout
+ )
+{
+ UINTN Index;
+ INTN Elapsed;
+
+ for (Index = 0; Index < NumberOfBytes; Index ++) {
+ Elapsed = (INTN) Timeout;
+ while (TRUE) {
+ if (SerialPortPoll () || Timeout == 0) {
+ SerialPortRead (Buffer + Index, 1);
+ break;
+ }
+ MicroSecondDelay (1000);
+ Elapsed -= 1000;
+ if (Elapsed < 0) {
+ return 0;
+ }
+ }
+ }
+
+ return NumberOfBytes;
+}
+
+/**
+ Write data from buffer to debug device.
+
+ Writes NumberOfBytes data bytes from Buffer to the debug device.
+ The number of bytes actually written to the debug device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to be written.
+ @param NumberOfBytes Number of bytes to written to the debug device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the debug device.
+ If this value is less than NumberOfBytes, then the read operation failed.
+
+**/
+UINTN
+EFIAPI
+DebugPortWriteBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ return SerialPortWrite (Buffer, NumberOfBytes);
+}
+
+/**
+ Polls a debug device to see if there is any data waiting to be read.
+
+ Polls a debug device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the debug device, then TRUE is returned.
+ If there is no data waiting to be read from the debug device, then FALSE is returned.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE Data is waiting to be read from the debug device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPortPollBuffer (
+ IN DEBUG_PORT_HANDLE Handle
+ )
+{
+ return SerialPortPoll ();
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.inf b/SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.inf new file mode 100644 index 0000000000..dff0fc92b1 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.inf @@ -0,0 +1,38 @@ +## @file
+# Debug Communication Library instance based on serila port.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DebugCommunicationLibSerialPort
+ FILE_GUID = 8CC435C5-6330-4269-B0C3-E3BD05C86FB8
+ MODULE_TYPE = BASE
+ VERSION_STRING = 0.7
+ LIBRARY_CLASS = DebugCommunicationLib
+
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources.common]
+ DebugCommunicationLibSerialPort.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[LibraryClasses]
+ SerialPortLib
+ TimerLib
+
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c new file mode 100644 index 0000000000..588e45853d --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.c @@ -0,0 +1,1076 @@ +/** @file
+ Debug Port Library implementation based on usb debug port.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Usb.h>
+#include <Library/IoLib.h>
+#include <Library/PciLib.h>
+#include <Library/PcdLib.h>
+#include <Library/TimerLib.h>
+#include <Library/DebugCommunicationLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/BaseLib.h>
+
+#define SETUP_PID 0x2D
+#define INPUT_PID 0x69
+#define OUTPUT_PID 0xE1
+#define ERROR_PID 0x55
+#define DATA0_PID 0xC3
+#define DATA1_PID 0x4B
+#define DATA2_PID 0x87
+#define MDATA_PID 0x0F
+#define ACK_PID 0xD2
+#define NAK_PID 0x5A
+#define STALL_PID 0x1E
+#define NYET_PID 0x96
+
+#define PCI_CAPABILITY_ID_DEBUG_PORT 0x0A
+#define USB_DEBUG_PORT_MAX_PACKET_SIZE 0x08
+
+#define USB_DEBUG_PORT_IN_USE BIT10
+#define USB_DEBUG_PORT_ENABLE BIT28
+#define USB_DEBUG_PORT_OWNER BIT30
+
+#define USB_PORT_LINE_STATUS_LS 0x400
+#define USB_PORT_LINE_STATUS_MASK 0xC00
+
+//
+// Usb debug device descriptor, which is defined at
+// USB2 Debug Device Specification.
+//
+typedef struct _USB_DEBUG_PORT_DESCRIPTOR {
+ UINT8 Length;
+ UINT8 DescriptorType;
+ UINT8 DebugInEndpoint;
+ UINT8 DebugOutEndpoint;
+}USB_DEBUG_PORT_DESCRIPTOR;
+
+USB_DEVICE_REQUEST mGetDebugDescriptor = {
+ 0x80,
+ USB_REQ_GET_DESCRIPTOR,
+ (UINT16)(0x0A << 8),
+ 0x0000,
+ sizeof(USB_DEBUG_PORT_DESCRIPTOR)
+ };
+
+USB_DEVICE_REQUEST mSetDebugFeature = {
+ 0x0,
+ USB_REQ_SET_FEATURE,
+ (UINT16)(0x06),
+ 0x0000,
+ 0x0
+ };
+
+USB_DEVICE_REQUEST mSetDebugAddress = {
+ 0x0,
+ USB_REQ_SET_ADDRESS,
+ (UINT16)(0x7F),
+ 0x0000,
+ 0x0
+ };
+
+//
+// Usb debug port register file, which is defined at
+// EHCI Specification.
+//
+typedef struct _USB_DEBUG_PORT_REGISTER {
+ UINT32 ControlStatus;
+ UINT8 TokenPid;
+ UINT8 SendPid;
+ UINT8 ReceivedPid;
+ UINT8 Reserved1;
+ UINT8 DataBuffer[8];
+ UINT8 UsbEndPoint;
+ UINT8 UsbAddress;
+ UINT8 Reserved2;
+ UINT8 Reserved3;
+}USB_DEBUG_PORT_REGISTER;
+
+#pragma pack(1)
+//
+// The internal data structure of DEBUG_PORT_HANDLE, which stores some
+// important datum which are used across various phases.
+//
+typedef struct _USB_DEBUG_PORT_HANDLE{
+ //
+ // The usb debug port memory BAR number in EHCI configuration space.
+ //
+ UINT8 DebugPortBarNumber;
+ UINT8 Reserved;
+ //
+ // The offset of usb debug port registers in EHCI memory range.
+ //
+ UINT16 DebugPortOffset;
+ //
+ // The usb debug port memory BAR address.
+ //
+ UINTN UsbDebugPortMemoryBase;
+ //
+ // The EHCI memory BAR address.
+ //
+ UINTN EhciMemoryBase;
+ //
+ // The Bulk In endpoint toggle bit.
+ //
+ UINT8 BulkInToggle;
+ //
+ // The Bulk Out endpoint toggle bit.
+ //
+ UINT8 BulkOutToggle;
+ //
+ // The available data length in the following data buffer.
+ //
+ UINT8 DataCount;
+ //
+ // The data buffer. Maximum length is 8 bytes.
+ //
+ UINT8 Data[8];
+} USB_DEBUG_PORT_HANDLE;
+#pragma pack()
+
+//
+// The global variable which can be used after memory is ready.
+//
+USB_DEBUG_PORT_HANDLE mUsbDebugPortHandle;
+
+/**
+ Calculate the usb debug port bar address.
+
+ @param DebugPortOffset Get usb debug port offset in the usb debug port memory space.
+ @param DebugPortBarNumbar Get the bar number at which usb debug port is located.
+
+ @retval RETURN_UNSUPPORTED The usb host controller does not supported usb debug port capability.
+ @retval RETURN_SUCCESS Get bar and offset successfully.
+
+**/
+RETURN_STATUS
+EFIAPI
+CalculateUsbDebugPortBar (
+ OUT UINT16 *DebugPortOffset,
+ OUT UINT8 *DebugPortBarNumbar
+ )
+{
+ UINT16 PciStatus;
+ UINT8 CapabilityPtr;
+ UINT8 CapabilityId;
+
+ //
+ // Enable Ehci Host Controller MMIO Space.
+ //
+ PciStatus = PciRead16 (PcdGet32(PcdUsbEhciPciAddress) + PCI_PRIMARY_STATUS_OFFSET);
+
+ if ((PciStatus & EFI_PCI_STATUS_CAPABILITY) == 0) {
+ //
+ // The Pci Device Doesn't Support Capability Pointer.
+ //
+ return RETURN_UNSUPPORTED;
+ }
+
+ //
+ // Get Pointer To Capability List
+ //
+ CapabilityPtr = PciRead8(PcdGet32(PcdUsbEhciPciAddress) + PCI_CAPBILITY_POINTER_OFFSET);
+
+ //
+ // Find Capability ID 0xA, Which Is For Debug Port
+ //
+ while (CapabilityPtr != 0) {
+ CapabilityId = PciRead8(PcdGet32(PcdUsbEhciPciAddress) + CapabilityPtr);
+ if (CapabilityId == PCI_CAPABILITY_ID_DEBUG_PORT) {
+ break;
+ }
+ CapabilityPtr = PciRead8(PcdGet32(PcdUsbEhciPciAddress) + CapabilityPtr + 1);
+ }
+
+ //
+ // No Debug Port Capability Found
+ //
+ if (CapabilityPtr == 0) {
+ return RETURN_UNSUPPORTED;
+ }
+
+ //
+ // Get The Base Address Of Debug Port Register In Debug Port Capability Register
+ //
+ *DebugPortOffset = (UINT16)(PciRead16(PcdGet32(PcdUsbEhciPciAddress) + CapabilityPtr + 2) & 0x1FFF);
+ *DebugPortBarNumbar = (UINT8)((PciRead16(PcdGet32(PcdUsbEhciPciAddress) + CapabilityPtr + 2) >> 13) - 1);
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Do a usb IN transaction by usb debug port.
+
+ @param DebugPortRegister Pointer to the base address of usb debug port register interface.
+ @param Buffer Pointer to the buffer receiving data.
+ @param Length Number of bytes of the received data.
+ @param Token The token PID for each USB transaction.
+ @param Addr The usb device address for usb transaction.
+ @param Ep The endpoint for usb transaction.
+ @param DataToggle The toggle bit used at usb transaction.
+
+ @retval RETURN_SUCCESS The IN transaction is executed successfully.
+ @retval RETURN_INVALID_PARAMETER The parameters passed in are invalid.
+ @retval RETURN_DEVICE_ERROR The IN transaction comes across error.
+
+**/
+RETURN_STATUS
+EFIAPI
+UsbDebugPortIn (
+ IN USB_DEBUG_PORT_REGISTER *DebugPortRegister,
+ IN OUT UINT8 *Buffer,
+ OUT UINT8 *Length,
+ IN UINT8 Token,
+ IN UINT8 Addr,
+ IN UINT8 Ep,
+ IN UINT8 DataToggle
+ )
+{
+ UINTN Index;
+
+ if (Length == NULL) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ *Length = 0;
+
+ DebugPortRegister->TokenPid = Token;
+ if (DataToggle != 0) {
+ DebugPortRegister->SendPid = DATA1_PID;
+ } else {
+ DebugPortRegister->SendPid = DATA0_PID;
+ }
+
+ DebugPortRegister->UsbAddress = (UINT8)(Addr & 0x7F);
+ DebugPortRegister->UsbEndPoint = (UINT8)(Ep & 0xF);
+
+ //
+ // Clearing W/R bit to indicate it's a READ operation
+ //
+ MmioAnd32((UINTN)&DebugPortRegister->ControlStatus, (UINT32)~BIT4);
+
+ //
+ // Setting GO bit as well as clearing DONE bit
+ //
+ MmioOr32((UINTN)&DebugPortRegister->ControlStatus, (UINT32)BIT5);
+
+ //
+ // Wait for completing the request
+ //
+ while ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & (UINT32)BIT16) == 0);
+
+ //
+ // Check if the request is executed successfully or not.
+ //
+ if ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus)) & BIT6) {
+ return RETURN_DEVICE_ERROR;
+ }
+
+ //
+ // Make sure the received data are not beyond the allowable maximum length - 8 byte
+ //
+ if (((MmioRead32((UINTN)&DebugPortRegister->ControlStatus)) & 0xF) > USB_DEBUG_PORT_MAX_PACKET_SIZE) {
+ return RETURN_DEVICE_ERROR;
+ }
+
+ *Length = (UINT8)(MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & 0xF);
+ for (Index = 0; Index < *Length; Index++) {
+ Buffer[Index] = DebugPortRegister->DataBuffer[Index];
+ }
+ return RETURN_SUCCESS;
+}
+
+/**
+ Do a usb SETUP/OUT transaction by usb debug port.
+
+ @param DebugPortRegister Pointer to the base address of usb debug port register interface.
+ @param Buffer Pointer to the buffer receiving data.
+ @param Length Number of bytes of the received data.
+ @param Token The token PID for each USB transaction.
+ @param Addr The usb device address for usb transaction.
+ @param Ep The endpoint for usb transaction.
+ @param DataToggle The toggle bit used at usb transaction.
+
+ @retval RETURN_SUCCESS The IN transaction is executed successfully.
+ @retval RETURN_INVALID_PARAMETER The parameters passed in are invalid.
+ @retval RETURN_DEVICE_ERROR The IN transaction comes across error.
+
+**/
+RETURN_STATUS
+EFIAPI
+UsbDebugPortOut (
+ IN USB_DEBUG_PORT_REGISTER *DebugPortRegister,
+ IN UINT8 *Buffer,
+ IN UINT8 Length,
+ IN UINT8 Token,
+ IN UINT8 Addr,
+ IN UINT8 Ep,
+ IN UINT8 DataToggle
+ )
+{
+ UINT8 Index;
+
+ if (Length > 8) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ DebugPortRegister->TokenPid = Token;
+ if (DataToggle != 0) {
+ DebugPortRegister->SendPid = DATA1_PID;
+ } else {
+ DebugPortRegister->SendPid = DATA0_PID;
+ }
+ DebugPortRegister->UsbAddress = (UINT8)(Addr & 0x7F);
+ DebugPortRegister->UsbEndPoint = (UINT8)(Ep & 0xF);
+
+ //
+ // Fill in the data length and corresponding data.
+ //
+ MmioAnd32((UINTN)&DebugPortRegister->ControlStatus, (UINT32)~0xF);
+ MmioOr32((UINTN)&DebugPortRegister->ControlStatus, Length & 0xF);
+ for (Index = 0; Index < Length; Index++) {
+ DebugPortRegister->DataBuffer[Index] = Buffer[Index];
+ }
+
+ //
+ // Setting W/R bit to indicate it's a WRITE operation
+ //
+ MmioOr32((UINTN)&DebugPortRegister->ControlStatus, BIT4);
+ //
+ // Setting GO bit as well as clearing DONE bit
+ //
+ MmioOr32((UINTN)&DebugPortRegister->ControlStatus, BIT5);
+
+ //
+ // Wait for completing the request
+ //
+ while ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus) & BIT16) == 0);
+
+ //
+ // Check if the request is executed successfully or not.
+ //
+ if ((MmioRead32((UINTN)&DebugPortRegister->ControlStatus)) & BIT6) {
+ return RETURN_DEVICE_ERROR;
+ }
+
+ //
+ // Make sure the sent data are not beyond the allowable maximum length - 8 byte
+ //
+ if (((MmioRead32((UINTN)&DebugPortRegister->ControlStatus)) & 0xF) > USB_DEBUG_PORT_MAX_PACKET_SIZE) {
+ return RETURN_DEVICE_ERROR;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Do a usb control transfer by usb debug port.
+
+ @param DebugPortRegister Pointer to the base address of usb debug port register interface.
+ @param SetupPacket The token PID for each USB transaction.
+ @param Addr The usb device address for usb transaction.
+ @param Ep The endpoint for usb transaction.
+ @param Data Pointer to the buffer receiving data.
+ @param DataLength Number of bytes of the received data.
+
+ @retval RETURN_SUCCESS The IN transaction is executed successfully.
+ @retval RETURN_INVALID_PARAMETER The parameters passed in are invalid.
+ @retval RETURN_DEVICE_ERROR The IN transaction comes across error.
+
+**/
+RETURN_STATUS
+EFIAPI
+UsbDebugPortControlTransfer (
+ IN USB_DEBUG_PORT_REGISTER *DebugPortRegister,
+ IN USB_DEVICE_REQUEST *SetupPacket,
+ IN UINT8 Addr,
+ IN UINT8 Ep,
+ OUT UINT8 *Data,
+ IN OUT UINT8 *DataLength
+ )
+{
+ RETURN_STATUS Status;
+ UINT8 Temp;
+
+ //
+ // Setup Phase
+ //
+ Status = UsbDebugPortOut(DebugPortRegister, (UINT8 *)SetupPacket, (UINT8)sizeof(USB_DEVICE_REQUEST), SETUP_PID, Addr, Ep, 0);
+ if (RETURN_ERROR(Status)) {
+ return Status;
+ }
+
+ //
+ // Data Phase
+ //
+ if (SetupPacket->Length != 0) {
+ if ((SetupPacket->RequestType & BIT7) != 0) {
+ //
+ // Get Data From Device
+ //
+ Status = UsbDebugPortIn(DebugPortRegister, Data, DataLength, INPUT_PID, Addr, Ep, 1);
+ if (RETURN_ERROR(Status)) {
+ return Status;
+ }
+ } else {
+ //
+ // Send Data To Device
+ //
+ Status = UsbDebugPortOut(DebugPortRegister, Data, *DataLength, OUTPUT_PID, Addr, Ep, 1);
+ if (RETURN_ERROR(Status)) {
+ return Status;
+ }
+ }
+ }
+
+ //
+ // Status Phase
+ //
+ if ((SetupPacket->RequestType & BIT7) != 0) {
+ //
+ // For READ operation, Data Toggle in Status Phase Should be 1.
+ //
+ Status = UsbDebugPortOut(DebugPortRegister, NULL, 0, OUTPUT_PID, Addr, Ep, 1);
+ } else {
+ //
+ // For WRITE operation, Data Toggle in Status Phase Should be 1.
+ //
+ Status = UsbDebugPortIn(DebugPortRegister, NULL, &Temp, INPUT_PID, Addr, Ep, 1);
+ }
+
+ return Status;
+}
+
+/**
+ Check if it needs to re-initialize usb debug port hardware.
+
+ During different phases switch, such as SEC to PEI or PEI to DXE or DXE to SMM, we should check
+ whether the usb debug port hardware configuration is changed. Such case can be triggerred by
+ Pci bus resource allocation and so on.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE The usb debug port hardware configuration is changed.
+ @retval FALSE The usb debug port hardware configuration is not changed.
+
+**/
+BOOLEAN
+EFIAPI
+NeedReinitializeHardware(
+ IN USB_DEBUG_PORT_HANDLE *Handle
+ )
+{
+ UINT16 PciCmd;
+ UINTN UsbDebugPortMemoryBase;
+ UINTN EhciMemoryBase;
+ BOOLEAN Status;
+ USB_DEBUG_PORT_REGISTER *UsbDebugPortRegister;
+
+ Status = FALSE;
+
+ EhciMemoryBase = 0xFFFFFC00 & PciRead32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET);
+ if (EhciMemoryBase != Handle->EhciMemoryBase) {
+ Handle->EhciMemoryBase = EhciMemoryBase;
+ Status = TRUE;
+ }
+
+ UsbDebugPortMemoryBase = 0xFFFFFC00 & PciRead32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET + Handle->DebugPortBarNumber * 4);
+ if (UsbDebugPortMemoryBase != Handle->UsbDebugPortMemoryBase) {
+ Handle->UsbDebugPortMemoryBase = UsbDebugPortMemoryBase;
+ Status = TRUE;
+ }
+
+ //
+ // Enable Ehci Memory Space Access
+ //
+ PciCmd = PciRead16 (PcdGet32(PcdUsbEhciPciAddress) + PCI_COMMAND_OFFSET);
+ if (((PciCmd & EFI_PCI_COMMAND_MEMORY_SPACE) == 0) || ((PciCmd & EFI_PCI_COMMAND_BUS_MASTER) == 0)) {
+ Status = TRUE;
+ }
+
+ //
+ // Check if the debug port is enabled and owned by myself.
+ //
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(Handle->UsbDebugPortMemoryBase + Handle->DebugPortOffset);
+ if ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) &
+ (USB_DEBUG_PORT_OWNER | USB_DEBUG_PORT_ENABLE | USB_DEBUG_PORT_IN_USE)) == 0) {
+ Status = TRUE;
+ }
+ return Status;
+}
+
+/**
+ Initialize usb debug port hardware.
+
+ 1. reset ehci host controller.
+ 2. set right port to debug port.
+ 3. find a usb debug device is attached by getting debug device descriptor.
+ 4. set address for the usb debug device.
+ 5. configure the usb debug device to debug mode.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE The usb debug port hardware configuration is changed.
+ @retval FALSE The usb debug port hardware configuration is not changed.
+
+**/
+RETURN_STATUS
+EFIAPI
+InitializeUsbDebugHardware (
+ IN USB_DEBUG_PORT_HANDLE *Handle
+)
+{
+ RETURN_STATUS Status;
+ USB_DEBUG_PORT_REGISTER *UsbDebugPortRegister;
+ USB_DEBUG_PORT_DESCRIPTOR UsbDebugPortDescriptor;
+ UINT16 PciCmd;
+ UINT32 *PortStatus;
+ UINT32 *UsbCmd;
+ UINT32 *UsbStatus;
+ UINT32 *UsbHCSParam;
+ UINT8 DebugPortNumber;
+ UINT8 Length;
+
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(Handle->UsbDebugPortMemoryBase + Handle->DebugPortOffset);
+ PciCmd = PciRead16 (PcdGet32(PcdUsbEhciPciAddress) + PCI_COMMAND_OFFSET);
+ UsbHCSParam = (UINT32 *)(Handle->EhciMemoryBase + 0x04);
+ UsbCmd = (UINT32 *)(Handle->EhciMemoryBase + 0x20);
+ UsbStatus = (UINT32 *)(Handle->EhciMemoryBase + 0x24);
+
+ //
+ // initialize the data toggle used by bulk in/out endpoint.
+ //
+ Handle->BulkInToggle = 0;
+ Handle->BulkOutToggle = 0;
+
+ //
+ // Enable Ehci Memory Space Access
+ //
+ if (((PciCmd & EFI_PCI_COMMAND_MEMORY_SPACE) == 0) || ((PciCmd & EFI_PCI_COMMAND_BUS_MASTER) == 0)) {
+ PciCmd |= EFI_PCI_COMMAND_MEMORY_SPACE | EFI_PCI_COMMAND_BUS_MASTER;
+ PciWrite16(PcdGet32(PcdUsbEhciPciAddress) + PCI_COMMAND_OFFSET, PciCmd);
+ }
+
+ //
+ // If the host controller is not halted, then halt it.
+ //
+ if ((MmioRead32((UINTN)UsbStatus) & BIT12) == 0) {
+ MmioAnd32((UINTN)UsbCmd, (UINT32)~BIT0);
+ while ((MmioRead32((UINTN)UsbStatus) & BIT12) == 0);
+ }
+ //
+ // reset the host controller.
+ //
+ MmioOr32((UINTN)UsbCmd, BIT1);
+ //
+ // ensure that the host controller is reset.
+ //
+ while (MmioRead32((UINTN)UsbCmd) & BIT1);
+
+ //
+ // Start the host controller if it's not running
+ //
+ if (MmioRead32((UINTN)UsbStatus) & BIT12) {
+ MmioOr32((UINTN)UsbCmd, BIT0);
+ // ensure that the host controller is started (HALTED bit must be cleared)
+ while (MmioRead32((UINTN)UsbStatus) & BIT12);
+ }
+
+ //
+ // First get the ownership of port 0.
+ //
+ MmioOr32((UINTN)&UsbDebugPortRegister->ControlStatus, USB_DEBUG_PORT_OWNER);
+
+ MicroSecondDelay (200000);
+
+ //
+ // Find out which port is used as debug port.
+ //
+ DebugPortNumber = (UINT8)((MmioRead32((UINTN)UsbHCSParam) & 0x00F00000) >> 20);
+ //
+ // Should find a non low-speed device is connected
+ //
+ PortStatus = (UINT32 *)(Handle->EhciMemoryBase + 0x64 + (DebugPortNumber - 1) * 4);
+ if (!(MmioRead32((UINTN)PortStatus) & BIT0) || ((MmioRead32((UINTN)PortStatus) & USB_PORT_LINE_STATUS_MASK) == USB_PORT_LINE_STATUS_LS)) {
+ return RETURN_NOT_FOUND;
+ }
+
+ //
+ // Reset the debug port
+ //
+ MmioOr32((UINTN)PortStatus, BIT8);
+ MicroSecondDelay (200000);
+ MmioAnd32((UINTN)PortStatus, (UINT32)~BIT8);
+ while (MmioRead32((UINTN)PortStatus) & BIT8);
+
+ //
+ // The port enabled bit should be set by HW.
+ //
+ if ((MmioRead32((UINTN)PortStatus) & BIT2) == 0) {
+ return RETURN_DEVICE_ERROR;
+ }
+
+ //
+ // Enable Usb Debug Port Capability
+ //
+ MmioOr32((UINTN)&UsbDebugPortRegister->ControlStatus, USB_DEBUG_PORT_ENABLE | USB_DEBUG_PORT_IN_USE);
+
+ //
+ // Start to communicate with Usb Debug Device to see if the attached device is usb debug device or not.
+ //
+ Length = (UINT8)sizeof (USB_DEBUG_PORT_DESCRIPTOR);
+
+ //
+ // It's not a dedicated usb debug device, should use address 0 to get debug descriptor.
+ //
+ Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mGetDebugDescriptor, 0x0, 0x0, (UINT8*)&UsbDebugPortDescriptor, &Length);
+ if (RETURN_ERROR(Status)) {
+ //
+ // The device is not a usb debug device.
+ //
+ return Status;
+ }
+
+ //
+ // set usb debug device address as 0x7F.
+ //
+ Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mSetDebugAddress, 0x0, 0x0, (UINT8*)&UsbDebugPortDescriptor, &Length);
+ if (RETURN_ERROR(Status)) {
+ //
+ // The device can not work well.
+ //
+ return Status;
+ }
+
+ //
+ // enable the usb debug feature.
+ //
+ Status = UsbDebugPortControlTransfer (UsbDebugPortRegister, &mSetDebugFeature, 0x7F, 0x0, NULL, NULL);
+
+ return Status;
+}
+
+/**
+ Read data from debug device and save the datas in buffer.
+
+ Reads NumberOfBytes data bytes from a debug device into the buffer
+ specified by Buffer. The number of bytes actually read is returned.
+ If the return value is less than NumberOfBytes, then the rest operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to store the data read from the debug device.
+ @param NumberOfBytes Number of bytes which will be read.
+ @param Timeout Timeout value for reading from debug device. It unit is Microsecond.
+
+ @retval 0 Read data failed, no data is to be read.
+ @retval >0 Actual number of bytes read from debug device.
+
+**/
+UINTN
+EFIAPI
+DebugPortReadBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes,
+ IN UINTN Timeout
+ )
+{
+ USB_DEBUG_PORT_HANDLE *UsbDebugPortHandle;
+ USB_DEBUG_PORT_REGISTER *UsbDebugPortRegister;
+ RETURN_STATUS Status;
+ UINT8 Received;
+ UINTN Total;
+ UINTN Remaining;
+ UINT8 Index;
+ UINT8 Length;
+
+ if (NumberOfBytes == 0 || Buffer == NULL) {
+ return 0;
+ }
+
+ Received = 0;
+ Total = 0;
+ Remaining = 0;
+
+ //
+ // If Handle is NULL, it means memory is ready for use.
+ // Use global variable to store handle value.
+ //
+ if (Handle == NULL) {
+ UsbDebugPortHandle = &mUsbDebugPortHandle;
+ } else {
+ UsbDebugPortHandle = (USB_DEBUG_PORT_HANDLE *)Handle;
+ }
+
+ if (NeedReinitializeHardware(UsbDebugPortHandle)) {
+ Status = InitializeUsbDebugHardware (UsbDebugPortHandle);
+ if (RETURN_ERROR(Status)) {
+ return 0;
+ }
+ }
+
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
+
+ //
+ // First read data from buffer, then read debug port hw to get received data.
+ //
+ if (UsbDebugPortHandle->DataCount > 0) {
+ if (NumberOfBytes <= UsbDebugPortHandle->DataCount) {
+ Total = NumberOfBytes;
+ } else {
+ Total = UsbDebugPortHandle->DataCount;
+ }
+
+ for (Index = 0; Index < Total; Index++) {
+ Buffer[Index] = UsbDebugPortHandle->Data[Index];
+ }
+
+ for (Index = 0; Index < UsbDebugPortHandle->DataCount - Total; Index++) {
+ if (Total + Index >= 8) {
+ return 0;
+ }
+ UsbDebugPortHandle->Data[Index] = UsbDebugPortHandle->Data[Total + Index];
+ }
+ UsbDebugPortHandle->DataCount = (UINT8)(UsbDebugPortHandle->DataCount - (UINT8)Total);
+ }
+
+ //
+ // If Timeout is equal to 0, then it means it should always wait until all datum required are received.
+ //
+ if (Timeout == 0) {
+ Timeout = 0xFFFFFFFF;
+ }
+
+ //
+ // Read remaining data by executing one or more usb debug transfer transactions at usb debug port hw.
+ //
+ while ((Total < NumberOfBytes) && (Timeout != 0)) {
+ Remaining = NumberOfBytes - Total;
+ if (Remaining >= USB_DEBUG_PORT_MAX_PACKET_SIZE) {
+ Status = UsbDebugPortIn(UsbDebugPortRegister, Buffer + Total, &Received, INPUT_PID, 0x7f, 0x82, UsbDebugPortHandle->BulkInToggle);
+
+ if (RETURN_ERROR(Status)) {
+ return Total;
+ }
+ } else {
+ Status = UsbDebugPortIn(UsbDebugPortRegister, &UsbDebugPortHandle->Data[0], &Received, INPUT_PID, 0x7f, 0x82, UsbDebugPortHandle->BulkInToggle);
+
+ if (RETURN_ERROR(Status)) {
+ return Total;
+ }
+
+ UsbDebugPortHandle->DataCount = Received;
+
+ if (Remaining <= Received) {
+ Length = (UINT8)Remaining;
+ } else {
+ Length = (UINT8)Received;
+ }
+
+ //
+ // Copy required data from the data buffer to user buffer.
+ //
+ for (Index = 0; Index < Length; Index++) {
+ (Buffer + Total)[Index] = UsbDebugPortHandle->Data[Index];
+ UsbDebugPortHandle->DataCount--;
+ }
+
+ //
+ // reorder the data buffer to make available data arranged from the beginning of the data buffer.
+ //
+ for (Index = 0; Index < Received - Length; Index++) {
+ if (Length + Index >= 8) {
+ return 0;
+ }
+ UsbDebugPortHandle->Data[Index] = UsbDebugPortHandle->Data[Length + Index];
+ }
+ //
+ // fixup the real received length in Buffer.
+ //
+ Received = Length;
+ }
+ UsbDebugPortHandle->BulkInToggle ^= 1;
+
+ Total += Received;
+ Timeout -= 100;
+ }
+
+ return Total;
+}
+
+/**
+ Write data from buffer to debug device.
+
+ Writes NumberOfBytes data bytes from Buffer to the debug device.
+ The number of bytes actually written to the debug device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Handle Debug port handle.
+ @param Buffer Pointer to the data buffer to be written.
+ @param NumberOfBytes Number of bytes to written to the debug device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the debug device.
+ If this value is less than NumberOfBytes, then the read operation failed.
+
+**/
+UINTN
+EFIAPI
+DebugPortWriteBuffer (
+ IN DEBUG_PORT_HANDLE Handle,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ USB_DEBUG_PORT_HANDLE *UsbDebugPortHandle;
+ USB_DEBUG_PORT_REGISTER *UsbDebugPortRegister;
+ RETURN_STATUS Status;
+ UINT8 Sent;
+ UINTN Total;
+ UINT8 ReceivedPid;
+
+ if (NumberOfBytes == 0 || Buffer == NULL) {
+ return 0;
+ }
+
+ Sent = 0;
+ Total = 0;
+
+ //
+ // If Handle is NULL, it means memory is ready for use.
+ // Use global variable to store handle value.
+ //
+ if (Handle == NULL) {
+ UsbDebugPortHandle = &mUsbDebugPortHandle;
+ } else {
+ UsbDebugPortHandle = (USB_DEBUG_PORT_HANDLE *)Handle;
+ }
+
+ if (NeedReinitializeHardware(UsbDebugPortHandle)) {
+ Status = InitializeUsbDebugHardware (UsbDebugPortHandle);
+ if (RETURN_ERROR(Status)) {
+ return 0;
+ }
+ }
+
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
+
+ while ((Total < NumberOfBytes)) {
+ if (NumberOfBytes - Total > USB_DEBUG_PORT_MAX_PACKET_SIZE) {
+ Sent = USB_DEBUG_PORT_MAX_PACKET_SIZE;
+ } else {
+ Sent = (UINT8)(NumberOfBytes - Total);
+ }
+
+ Status = UsbDebugPortOut(UsbDebugPortRegister, Buffer + Total, Sent, OUTPUT_PID, 0x7F, 0x01, UsbDebugPortHandle->BulkOutToggle);
+
+ if (RETURN_ERROR(Status)) {
+ return Total;
+ }
+
+ ReceivedPid = (MmioRead8((UINTN)&UsbDebugPortRegister->ReceivedPid));
+ //
+ // If received a NAK_PID on write transaction, it means the usb debug device is busy and can not handle this transaction.
+ // should send the packet again.
+ //
+ if (ReceivedPid == NAK_PID) {
+ Sent = 0;
+ } else {
+ UsbDebugPortHandle->BulkOutToggle ^= 1;
+ }
+ Total += Sent;
+ }
+ return Total;
+}
+
+/**
+ Polls a debug device to see if there is any data waiting to be read.
+
+ Polls a debug device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the debug device, then TRUE is returned.
+ If there is no data waiting to be read from the debug device, then FALSE is returned.
+
+ @param Handle Debug port handle.
+
+ @retval TRUE Data is waiting to be read from the debug device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPortPollBuffer (
+ IN DEBUG_PORT_HANDLE Handle
+ )
+{
+ USB_DEBUG_PORT_HANDLE *UsbDebugPortHandle;
+ USB_DEBUG_PORT_REGISTER *UsbDebugPortRegister;
+ UINT8 Length;
+ UINT8 Index;
+ RETURN_STATUS Status;
+
+ //
+ // If Handle is NULL, it means memory is ready for use.
+ // Use global variable to store handle value.
+ //
+ if (Handle == NULL) {
+ UsbDebugPortHandle = &mUsbDebugPortHandle;
+ } else {
+ UsbDebugPortHandle = (USB_DEBUG_PORT_HANDLE *)Handle;
+ }
+
+ if (NeedReinitializeHardware(UsbDebugPortHandle)) {
+ Status = InitializeUsbDebugHardware(UsbDebugPortHandle);
+ if (RETURN_ERROR(Status)) {
+ return FALSE;
+ }
+ }
+
+ //
+ // If the data buffer is not empty, then return TRUE directly.
+ // else initialize a usb read transaction and read data to the data buffer.
+ //
+ if (UsbDebugPortHandle->DataCount != 0) {
+ return TRUE;
+ }
+
+ UsbDebugPortRegister = (USB_DEBUG_PORT_REGISTER *)(UsbDebugPortHandle->UsbDebugPortMemoryBase + UsbDebugPortHandle->DebugPortOffset);
+
+ UsbDebugPortRegister->TokenPid = INPUT_PID;
+ if (UsbDebugPortHandle->BulkInToggle == 0) {
+ UsbDebugPortRegister->SendPid = DATA0_PID;
+ } else {
+ UsbDebugPortRegister->SendPid = DATA1_PID;
+ }
+ UsbDebugPortRegister->UsbAddress = 0x7F;
+ UsbDebugPortRegister->UsbEndPoint = 0x82 & 0x0F;
+
+ //
+ // Clearing W/R bit to indicate it's a READ operation
+ //
+ MmioAnd32((UINTN)&UsbDebugPortRegister->ControlStatus, (UINT32)~BIT4);
+ //
+ // Setting GO bit as well as clearing DONE bit
+ //
+ MmioOr32((UINTN)&UsbDebugPortRegister->ControlStatus, (UINT32)BIT5);
+
+ //
+ // Wait for completing the request
+ //
+ while ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) & (UINT32)BIT16) == 0);
+
+ if ((MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus)) & BIT6) {
+ return FALSE;
+ }
+
+ Length = (UINT8)(MmioRead32((UINTN)&UsbDebugPortRegister->ControlStatus) & 0xF);
+
+ if (Length > 8) {
+ return FALSE;
+ }
+
+ UsbDebugPortHandle->BulkInToggle ^= 1;
+
+ if (Length == 0) {
+ return FALSE;
+ }
+
+ for (Index = 0; Index < Length; Index++) {
+ UsbDebugPortHandle->Data[Index] = UsbDebugPortRegister->DataBuffer[Index];
+ }
+ UsbDebugPortHandle->DataCount = Length;
+
+ return TRUE;
+}
+
+/**
+ Initialize the debug port.
+
+ If Function is not NULL, Debug Communication Libary will call this function
+ by passing in the Context to be the first parameter. If needed, Debug Communication
+ Library will create one debug port handle to be the second argument passing in
+ calling the Function, otherwise it will pass NULL to be the second argument of
+ Function.
+
+ If Function is NULL, and Context is not NULL, the Debug Communication Library could
+ a) Return the same handle as passed in (as Context parameter).
+ b) Ignore the input Context parameter and create new hanlde to be returned.
+
+ If parameter Function is NULL and Context is NULL, Debug Communication Library could
+ created a new handle if needed and return it, otherwise it will return NULL.
+
+ @param[in] Context Context needed by callback function; it was optional.
+ @param[in] Function Continue function called by Debug Communication library;
+ it was optional.
+
+ @return The debug port handle created by Debug Communication Library if Function
+ is not NULL.
+
+**/
+DEBUG_PORT_HANDLE
+EFIAPI
+DebugPortInitialize (
+ IN VOID *Context,
+ IN DEBUG_PORT_CONTINUE Function
+ )
+{
+ RETURN_STATUS Status;
+ USB_DEBUG_PORT_HANDLE Handle;
+
+ if (Function == NULL && Context != NULL) {
+ return (DEBUG_PORT_HANDLE *) Context;
+ }
+
+ ZeroMem(&Handle, sizeof (USB_DEBUG_PORT_HANDLE));
+
+ Status = CalculateUsbDebugPortBar(&Handle.DebugPortOffset, &Handle.DebugPortBarNumber);
+ if (RETURN_ERROR (Status)) {
+ return NULL;
+ }
+
+ Handle.EhciMemoryBase = 0xFFFFFC00 & PciRead32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET);
+
+ if (Handle.EhciMemoryBase == 0) {
+ //
+ // Usb Debug Port MMIO Space Is Not Enabled. Assumption here that DebugPortBase is zero
+ //
+ PciWrite32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET, PcdGet32(PcdUsbEhciMemorySpaceBase));
+ Handle.EhciMemoryBase = 0xFFFFFC00 & PciRead32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET);
+ }
+
+ Handle.UsbDebugPortMemoryBase = 0xFFFFFC00 & PciRead32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET + Handle.DebugPortBarNumber * 4);
+
+ if (Handle.UsbDebugPortMemoryBase == 0) {
+ //
+ // Usb Debug Port MMIO Space Is Not Enabled. Assumption here that DebugPortBase is zero
+ //
+ PciWrite32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET + Handle.DebugPortBarNumber * 4, PcdGet32(PcdUsbDebugPortMemorySpaceBase));
+ Handle.UsbDebugPortMemoryBase = 0xFFFFFC00 & PciRead32(PcdGet32(PcdUsbEhciPciAddress) + PCI_BASE_ADDRESSREG_OFFSET + Handle.DebugPortBarNumber * 4);
+ }
+
+ Status = InitializeUsbDebugHardware (&Handle);
+ if (RETURN_ERROR(Status)) {
+ return NULL;
+ }
+
+ if (Function != NULL) {
+ Function (Context, &Handle);
+ } else {
+ CopyMem(&mUsbDebugPortHandle, &Handle, sizeof (USB_DEBUG_PORT_HANDLE));
+ }
+
+ return (DEBUG_PORT_HANDLE)(UINTN)&mUsbDebugPortHandle;
+}
+
diff --git a/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.inf b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.inf new file mode 100644 index 0000000000..bce5659fe2 --- /dev/null +++ b/SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.inf @@ -0,0 +1,53 @@ +## @file
+# Debug Communication Library instance based on usb debug port.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DebugCommunicationLibUsb
+ FILE_GUID = 87438836-AD8D-4e3e-9249-895120A67240
+ MODULE_TYPE = BASE
+ VERSION_STRING = 0.7
+ LIBRARY_CLASS = DebugCommunicationLib
+
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources.common]
+ DebugCommunicationLibUsb.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[Pcd]
+ ## The memory BAR of usb debug port, it may be different with the memory bar of ehci host controller.
+ ## Note that the memory BAR address is only used before Pci bus resource allocation.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbDebugPortMemorySpaceBase
+
+ ## The memory BAR of ehci host controller, in which usb debug feature is enabled.
+ ## Note that the memory BAR address is only used before Pci bus resource allocation.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbEhciMemorySpaceBase
+
+ ## The pci address of ehci host controller, in which usb debug feature is enabled.
+ ## The format of pci address please refer to SourceLevelDebugPkg.dec
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbEhciPciAddress
+
+[LibraryClasses]
+ TimerLib
+ IoLib
+ PciLib
+ PcdLib
+
diff --git a/SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLib.c b/SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLib.c new file mode 100644 index 0000000000..0fbc2b81d6 --- /dev/null +++ b/SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLib.c @@ -0,0 +1,269 @@ +/** @file
+ PE/Coff Extra Action library instances.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <Library/PeCoffExtraActionLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+
+#include <ImageDebugSupport.h>
+
+#define DEBUG_LOAD_IMAGE_METHOD_IO_HW_BREAKPOINT 1
+#define DEBUG_LOAD_IMAGE_METHOD_SOFT_INT3 2
+
+/**
+ Check if the hardware breakpoint in Drx is enabled by checking the Lx and Gx bit in Dr7.
+
+ It assumes that DebugAgent will set both Lx and Gx bit when setting up the hardware breakpoint.
+
+
+ @param RegisterIndex Index of Dr register. The value range is from 0 to 3.
+ @param Dr7 Value of Dr7 register.
+
+ @return TRUE The hardware breakpoint specified in the Drx is enabled.
+ @return FALSE The hardware breakpoint specified in the Drx is disabled.
+
+**/
+BOOLEAN
+IsDrxEnabled (
+ IN UINT8 RegisterIndex,
+ IN UINTN Dr7
+ )
+{
+ return (BOOLEAN) (((Dr7 >> (RegisterIndex * 2)) & (BIT0 | BIT1)) == (BIT0 | BIT1));
+}
+
+/**
+ Performs additional actions after a PE/COFF image has been loaded and relocated.
+
+ If ImageContext is NULL, then ASSERT().
+
+ @param ImageContext Pointer to the image context structure that describes the
+ PE/COFF image that has already been loaded and relocated.
+
+**/
+VOID
+EFIAPI
+PeCoffLoaderRelocateImageExtraAction (
+ IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
+ )
+{
+ BOOLEAN InterruptState;
+ UINTN Dr0;
+ UINTN Dr1;
+ UINTN Dr2;
+ UINTN Dr3;
+ UINTN Dr7;
+ UINTN Cr4;
+ UINTN NewDr7;
+ UINT8 LoadImageMethod;
+ UINT8 DebugAgentStatus;
+
+ ASSERT (ImageContext != NULL);
+
+ if (ImageContext->PdbPointer != NULL) {
+ DEBUG((EFI_D_ERROR, " PDB = %a\n", ImageContext->PdbPointer));
+ }
+
+ //
+ // Disable interrupts and save the current interrupt state
+ //
+ InterruptState = SaveAndDisableInterrupts ();
+
+ //
+ // Save Debug Register State
+ //
+ Dr0 = AsmReadDr0 ();
+ Dr1 = AsmReadDr1 ();
+ Dr2 = AsmReadDr2 ();
+ Dr3 = AsmReadDr3 ();
+ Dr7 = AsmReadDr7 ();
+ Cr4 = AsmReadCr4 ();
+
+ //
+ // DR0 = IMAGE_LOAD_SIGNATURE
+ // DR1 = The address of the Null-terminated ASCII string for the PE/COFF image's PDB file name
+ // DR2 = The pointer to the ImageContext structure
+ // DR3 = IO_PORT_BREAKPOINT_ADDRESS
+ // DR7 = Disables all HW breakpoints except for DR3 I/O port access of length 1 byte
+ // CR4 = Make sure DE(BIT3) is set
+ //
+ AsmWriteDr7 (0);
+ AsmWriteDr0 (IMAGE_LOAD_SIGNATURE);
+ AsmWriteDr1 ((UINTN)ImageContext->PdbPointer);
+ AsmWriteDr2 ((UINTN)ImageContext);
+ AsmWriteDr3 (IO_PORT_BREAKPOINT_ADDRESS);
+
+ LoadImageMethod = PcdGet8 (PcdDebugLoadImageMethod);
+ if (LoadImageMethod == DEBUG_LOAD_IMAGE_METHOD_IO_HW_BREAKPOINT) {
+ AsmWriteDr7 (0x20000480);
+ AsmWriteCr4 (Cr4 | BIT3);
+ //
+ // Do an IN from IO_PORT_BREAKPOINT_ADDRESS to generate a HW breakpoint until the port
+ // returns a read value other than DEBUG_AGENT_IMAGE_WAIT
+ //
+ do {
+ DebugAgentStatus = IoRead8 (IO_PORT_BREAKPOINT_ADDRESS);
+ } while (DebugAgentStatus == DEBUG_AGENT_IMAGE_WAIT);
+
+ } else if (LoadImageMethod == DEBUG_LOAD_IMAGE_METHOD_SOFT_INT3) {
+ //
+ // Generate a software break point.
+ //
+ CpuBreakpoint ();
+ }
+
+ //
+ // Restore Debug Register State only when Host didn't change it inside exception handler.
+ // E.g.: User halts the target and sets the HW breakpoint while target is
+ // in the above exception handler
+ //
+ NewDr7 = AsmReadDr7 ();
+ if (!IsDrxEnabled (0, NewDr7)) {
+ AsmWriteDr0 (Dr0);
+ }
+ if (!IsDrxEnabled (1, NewDr7)) {
+ AsmWriteDr1 (Dr1);
+ }
+ if (!IsDrxEnabled (2, NewDr7)) {
+ AsmWriteDr2 (Dr2);
+ }
+ if (!IsDrxEnabled (3, NewDr7)) {
+ AsmWriteDr3 (Dr3);
+ }
+ if (AsmReadCr4 () == (Cr4 | BIT3)) {
+ AsmWriteCr4 (Cr4);
+ }
+ if (NewDr7 == 0x20000480) {
+ AsmWriteDr7 (Dr7);
+ }
+ //
+ // Restore the interrupt state
+ //
+ SetInterruptState (InterruptState);
+}
+
+/**
+ Performs additional actions just before a PE/COFF image is unloaded. Any resources
+ that were allocated by PeCoffLoaderRelocateImageExtraAction() must be freed.
+
+ If ImageContext is NULL, then ASSERT().
+
+ @param ImageContext Pointer to the image context structure that describes the
+ PE/COFF image that is being unloaded.
+
+**/
+VOID
+EFIAPI
+PeCoffLoaderUnloadImageExtraAction (
+ IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
+ )
+{
+ BOOLEAN InterruptState;
+ UINTN Dr0;
+ UINTN Dr1;
+ UINTN Dr2;
+ UINTN Dr3;
+ UINTN Dr7;
+ UINTN Cr4;
+ UINTN NewDr7;
+ UINT8 LoadImageMethod;
+ UINT8 DebugAgentStatus;
+
+ ASSERT (ImageContext != NULL);
+
+ if (ImageContext->PdbPointer != NULL) {
+ DEBUG((EFI_D_ERROR, " PDB = %a\n", ImageContext->PdbPointer));
+ }
+
+ //
+ // Disable interrupts and save the current interrupt state
+ //
+ InterruptState = SaveAndDisableInterrupts ();
+
+ //
+ // Save Debug Register State
+ //
+ Dr0 = AsmReadDr0 ();
+ Dr1 = AsmReadDr1 ();
+ Dr2 = AsmReadDr2 ();
+ Dr3 = AsmReadDr3 ();
+ Dr7 = AsmReadDr7 ();
+ Cr4 = AsmReadCr4 ();
+
+ //
+ // DR0 = IMAGE_UNLOAD_SIGNATURE
+ // DR1 = The address of the Null-terminated ASCII string for the PE/COFF image's PDB file name
+ // DR2 = The pointer to the ImageContext structure
+ // DR3 = IO_PORT_BREAKPOINT_ADDRESS
+ // DR7 = Disables all HW breakpoints except for DR3 I/O port access of length 1 byte
+ // CR4 = Make sure DE(BIT3) is set
+ //
+ AsmWriteDr7 (0);
+ AsmWriteDr0 (IMAGE_UNLOAD_SIGNATURE);
+ AsmWriteDr1 ((UINTN)ImageContext->PdbPointer);
+ AsmWriteDr2 ((UINTN)ImageContext);
+ AsmWriteDr3 (IO_PORT_BREAKPOINT_ADDRESS);
+
+ LoadImageMethod = PcdGet8 (PcdDebugLoadImageMethod);
+ if (LoadImageMethod == DEBUG_LOAD_IMAGE_METHOD_IO_HW_BREAKPOINT) {
+ AsmWriteDr7 (0x20000480);
+ AsmWriteCr4 (Cr4 | BIT3);
+ //
+ // Do an IN from IO_PORT_BREAKPOINT_ADDRESS to generate a HW breakpoint until the port
+ // returns a read value other than DEBUG_AGENT_IMAGE_WAIT
+ //
+ do {
+ DebugAgentStatus = IoRead8 (IO_PORT_BREAKPOINT_ADDRESS);
+ } while (DebugAgentStatus == DEBUG_AGENT_IMAGE_WAIT);
+
+ } else if (LoadImageMethod == DEBUG_LOAD_IMAGE_METHOD_SOFT_INT3) {
+ //
+ // Generate a software break point.
+ //
+ CpuBreakpoint ();
+ }
+
+ //
+ // Restore Debug Register State only when Host didn't change it inside exception handler.
+ // E.g.: User halts the target and sets the HW breakpoint while target is
+ // in the above exception handler
+ //
+ NewDr7 = AsmReadDr7 ();
+ if (!IsDrxEnabled (0, NewDr7)) {
+ AsmWriteDr0 (Dr0);
+ }
+ if (!IsDrxEnabled (1, NewDr7)) {
+ AsmWriteDr1 (Dr1);
+ }
+ if (!IsDrxEnabled (2, NewDr7)) {
+ AsmWriteDr2 (Dr2);
+ }
+ if (!IsDrxEnabled (3, NewDr7)) {
+ AsmWriteDr3 (Dr3);
+ }
+ if (AsmReadCr4 () == (Cr4 | BIT3)) {
+ AsmWriteCr4 (Cr4);
+ }
+ if (NewDr7 == 0x20000480) {
+ AsmWriteDr7 (Dr7);
+ }
+
+ //
+ // Restore the interrupt state
+ //
+ SetInterruptState (InterruptState);
+}
diff --git a/SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLibDebug.inf b/SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLibDebug.inf new file mode 100644 index 0000000000..e3712afacb --- /dev/null +++ b/SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLibDebug.inf @@ -0,0 +1,45 @@ +## @file
+# PeCoffExtraAction Library to support source level debug.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeCoffExtraActionLib
+ FILE_GUID = 8F01CBD5-E069-44d7-90C9-35F0318603AD
+ MODULE_TYPE = BASE
+ VERSION_STRING = 0.7
+ LIBRARY_CLASS = PeCoffExtraActionLib
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources.common]
+ PeCoffExtraActionLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ SourceLevelDebugPkg/SourceLevelDebugPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
+ PcdLib
+
+[Pcd]
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdDebugLoadImageMethod
+
diff --git a/SourceLevelDebugPkg/Readme.txt b/SourceLevelDebugPkg/Readme.txt new file mode 100644 index 0000000000..e43ed18b42 --- /dev/null +++ b/SourceLevelDebugPkg/Readme.txt @@ -0,0 +1,8 @@ +UDK based firmware on UEFI IA-32 and UEFI x64 platforms may be debugged using Microsoft(R) Debugging Tools for Windows(R) (WinDbg). Debug capability is enabled with SourceLevelDebugPkg in conjunction with the Intel(R) UEFI Development Kit Debugger Tool (Intel(R) UDK Debugger Tool).
+
+The Intel(R) UDK Debugger Tool and its detailed user manual may be obtained from:
+http://www.intel.com/technology/efi.
+
+NOTE: In addition to the known issues listed in the user manual, the following anomalies have been observed:
+
+1) When using a USB debug cable, after the TARGET completes a reset during memory initialization, the connection between the HOST and the TARGET may be lost (e.g. WinDbg reports busy status and does not respond to a break request). A work around for this issue is to unplug the USB debug cable and then plug the cable back in. A new debug session may then be started.
\ No newline at end of file diff --git a/SourceLevelDebugPkg/SourceLevelDebugPkg.dec b/SourceLevelDebugPkg/SourceLevelDebugPkg.dec new file mode 100644 index 0000000000..798c0672cb --- /dev/null +++ b/SourceLevelDebugPkg/SourceLevelDebugPkg.dec @@ -0,0 +1,74 @@ +## @file SourceLevelDebugPkg.dec
+#
+# This package provides target side modules to support source level debug.
+# The target side components includes the Debug Agent Library instance
+# to communicate with host side modules, Debug Communication Library and
+# instances to provide the communication I/O functions between Debug Agent
+# and host, PeCoffExtraActionLib instance to report symbol path information,
+# etc.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials are licensed and made available under
+# the terms and conditions of the BSD License that accompanies this distribution.
+# The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ DEC_SPECIFICATION = 0x00010005
+ PACKAGE_NAME = SourceLevelDebugtPkg
+ PACKAGE_GUID = DBF00C27-D8D7-443d-918B-4E85CDA1373B
+ PACKAGE_VERSION = 0.70
+
+[Includes]
+ Include
+
+[Includes.IA32]
+ Include/Ia32
+
+[Includes.X64]
+ Include/Ia32
+
+[LibraryClasses]
+ ## @libraryclass Provides communication I/O functions between Debug Agent and HOST.
+ ##
+ DebugCommunicationLib|Include/Library/DebugCommunicationLib.h
+
+[Guids]
+ ## MdeModule package token space guid
+ # Include/Guid/DebugAgentGuid.h
+ gEfiDebugAgentGuid = {0x865a5a9b, 0xb85d, 0x474c, { 0x84, 0x55, 0x65, 0xd1, 0xbe, 0x84, 0x4b, 0xe2 }}
+ gEfiSourceLevelDebugPkgTokenSpaceGuid = {0x865a5aab, 0xb85d, 0x474c, { 0x84, 0x55, 0x65, 0xd1, 0xbe, 0x84, 0x4b, 0xe2 }}
+
+[PcdsFixedAtBuild, PcdsPatchableInModule]
+ ## The memory BAR of usb debug port, it may be different with the memory bar of ehci host controller.
+ ## Note that the memory BAR address is only used before Pci bus resource allocation.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbDebugPortMemorySpaceBase|0xd0000000|UINT32|0x00000001
+
+ ## The memory BAR of ehci host controller, in which usb debug feature is enabled.
+ ## Note that the memory BAR address is only used before Pci bus resource allocation.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbEhciMemorySpaceBase|0xd0000000|UINT32|0x00000002
+
+ ## The pci address of ehci host controller, in which usb debug feature is enabled.
+ ## The format of pci address is :
+ ## -----------------------------------------------------------------------
+ ## | Bits 28..31 | Bits 20..27 | Bits 15..19 | Bits 12..14 | Bits 00..11 |
+ ## -----------------------------------------------------------------------
+ ## | 0 | Bus | Device | Function | 0 |
+ ## -----------------------------------------------------------------------
+ ##
+ ## For the value below, it means the pci address at bus 0x0, device 0x1D, function 0x7.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdUsbEhciPciAddress|0x000EF000|UINT32|0x00000003
+
+ ## The mask of exception numbers whose handlers would be ignored and cannot be replaced or
+ ## hooked by Debug Agent Library.
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdExceptionsIgnoredByDebugger|0x00000000|UINT32|0x00000004
+
+ ## The method to issue break point to Debug Agent Library when Loading/UnLoading image.
+ ## 1: Use I/O Port 84 to issue hardware break point
+ ## 2: Use INT3 to issue software break point
+ gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdDebugLoadImageMethod|0x1|UINT8|0x00000005
diff --git a/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc b/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc new file mode 100644 index 0000000000..2049311fef --- /dev/null +++ b/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc @@ -0,0 +1,66 @@ +## @file
+#
+# Source Level Debug Package.
+#
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = SourceLevelDebugtPkg
+ PLATFORM_GUID = 38C85805-883F-4ee8-A854-95B966ED73AA
+ PLATFORM_VERSION = 0.70
+ DSC_SPECIFICATION = 0x00010005
+ OUTPUT_DIRECTORY = Build/SourceLevelDebugtPkg
+ SUPPORTED_ARCHITECTURES = IA32|X64
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+
+[LibraryClasses.common]
+ DebugLib|MdePkg/Library/UefiDebugLibStdErr/UefiDebugLibStdErr.inf
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ TimerLib|MdePkg/Library/BaseTimerLibNullTemplate/BaseTimerLibNullTemplate.inf
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ DebugCommunicationLib|SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.inf
+
+###################################################################################################
+#
+# Components Section - list of the modules and components that will be processed by compilation
+# tools and the EDK II tools to generate PE32/PE32+/Coff image files.
+#
+# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
+# into firmware volume images. This section is just a list of modules to compile from
+# source into UEFI-compliant binaries.
+# It is the FDF file that contains information on combining binary files into firmware
+# volume images, whose concept is beyond UEFI and is described in PI specification.
+# Binary modules do not need to be listed in this section, as they should be
+# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
+# Logo (Logo.bmp), and etc.
+# There may also be modules listed in this section that are not required in the FDF file,
+# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
+# generated for it, but the binary will not be put into any firmware volume.
+#
+###################################################################################################
+
+[Components.common]
+ SourceLevelDebugPkg/Library/DebugCommunicationLibSerialPort/DebugCommunicationLibSerialPort.inf
+ SourceLevelDebugPkg/Library/DebugCommunicationLibUsb/DebugCommunicationLibUsb.inf
+ SourceLevelDebugPkg/Library/PeCoffExtraActionLibDebug/PeCoffExtraActionLibDebug.inf
+ SourceLevelDebugPkg/Library/DebugAgent/SecPeiDebugAgentLib.inf
+ SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf
+ SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgentLib.inf
+
|