summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--AppPkg/Contributions.txt42
-rw-r--r--ArmPkg/Contributions.txt42
-rw-r--r--ArmPlatformPkg/Contributions.txt42
-rw-r--r--BaseTools/Contributions.txt42
-rw-r--r--BeagleBoardPkg/Contributions.txt42
-rw-r--r--CryptoPkg/Contributions.txt42
-rw-r--r--DuetPkg/Contributions.txt42
-rw-r--r--EdkCompatibilityPkg/Contributions.txt42
-rw-r--r--EdkShellBinPkg/Contributions.txt42
-rw-r--r--EdkShellPkg/Contributions.txt42
-rw-r--r--EmbeddedPkg/Contributions.txt42
-rw-r--r--EmulatorPkg/Contributions.txt42
-rw-r--r--FatBinPkg/Contributions.txt42
-rw-r--r--IntelFrameworkModulePkg/Contributions.txt42
-rw-r--r--IntelFrameworkPkg/Contributions.txt42
-rw-r--r--MdeModulePkg/Contributions.txt42
-rw-r--r--MdePkg/Contributions.txt42
-rw-r--r--NetworkPkg/Contributions.txt42
-rw-r--r--Nt32Pkg/Contributions.txt42
-rw-r--r--Omap35xxPkg/Contributions.txt42
-rw-r--r--OptionRomPkg/Contributions.txt42
-rw-r--r--OvmfPkg/Contributions.txt42
-rw-r--r--PcAtChipsetPkg/Contributions.txt42
-rw-r--r--PerformancePkg/Contributions.txt42
-rw-r--r--SecurityPkg/Contributions.txt42
-rw-r--r--ShellBinPkg/Contributions.txt42
-rw-r--r--ShellPkg/Contributions.txt42
-rw-r--r--SourceLevelDebugPkg/Contributions.txt42
-rw-r--r--StdLib/Contributions.txt42
-rw-r--r--StdLibPrivateInternalFiles/Contributions.txt42
-rw-r--r--UefiCpuPkg/Contributions.txt42
31 files changed, 899 insertions, 403 deletions
diff --git a/AppPkg/Contributions.txt b/AppPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/AppPkg/Contributions.txt
+++ b/AppPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/ArmPkg/Contributions.txt b/ArmPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/ArmPkg/Contributions.txt
+++ b/ArmPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/ArmPlatformPkg/Contributions.txt b/ArmPlatformPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/ArmPlatformPkg/Contributions.txt
+++ b/ArmPlatformPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/BaseTools/Contributions.txt b/BaseTools/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/BaseTools/Contributions.txt
+++ b/BaseTools/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/BeagleBoardPkg/Contributions.txt b/BeagleBoardPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/BeagleBoardPkg/Contributions.txt
+++ b/BeagleBoardPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/CryptoPkg/Contributions.txt b/CryptoPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/CryptoPkg/Contributions.txt
+++ b/CryptoPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/DuetPkg/Contributions.txt b/DuetPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/DuetPkg/Contributions.txt
+++ b/DuetPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/EdkCompatibilityPkg/Contributions.txt b/EdkCompatibilityPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/EdkCompatibilityPkg/Contributions.txt
+++ b/EdkCompatibilityPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/EdkShellBinPkg/Contributions.txt b/EdkShellBinPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/EdkShellBinPkg/Contributions.txt
+++ b/EdkShellBinPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/EdkShellPkg/Contributions.txt b/EdkShellPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/EdkShellPkg/Contributions.txt
+++ b/EdkShellPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/EmbeddedPkg/Contributions.txt b/EmbeddedPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/EmbeddedPkg/Contributions.txt
+++ b/EmbeddedPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/EmulatorPkg/Contributions.txt b/EmulatorPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/EmulatorPkg/Contributions.txt
+++ b/EmulatorPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/FatBinPkg/Contributions.txt b/FatBinPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/FatBinPkg/Contributions.txt
+++ b/FatBinPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/IntelFrameworkModulePkg/Contributions.txt b/IntelFrameworkModulePkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/IntelFrameworkModulePkg/Contributions.txt
+++ b/IntelFrameworkModulePkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/IntelFrameworkPkg/Contributions.txt b/IntelFrameworkPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/IntelFrameworkPkg/Contributions.txt
+++ b/IntelFrameworkPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/MdeModulePkg/Contributions.txt b/MdeModulePkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/MdeModulePkg/Contributions.txt
+++ b/MdeModulePkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/MdePkg/Contributions.txt b/MdePkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/MdePkg/Contributions.txt
+++ b/MdePkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/NetworkPkg/Contributions.txt b/NetworkPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/NetworkPkg/Contributions.txt
+++ b/NetworkPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/Nt32Pkg/Contributions.txt b/Nt32Pkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/Nt32Pkg/Contributions.txt
+++ b/Nt32Pkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/Omap35xxPkg/Contributions.txt b/Omap35xxPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/Omap35xxPkg/Contributions.txt
+++ b/Omap35xxPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/OptionRomPkg/Contributions.txt b/OptionRomPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/OptionRomPkg/Contributions.txt
+++ b/OptionRomPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/OvmfPkg/Contributions.txt b/OvmfPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/OvmfPkg/Contributions.txt
+++ b/OvmfPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/PcAtChipsetPkg/Contributions.txt b/PcAtChipsetPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/PcAtChipsetPkg/Contributions.txt
+++ b/PcAtChipsetPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/PerformancePkg/Contributions.txt b/PerformancePkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/PerformancePkg/Contributions.txt
+++ b/PerformancePkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/SecurityPkg/Contributions.txt b/SecurityPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/SecurityPkg/Contributions.txt
+++ b/SecurityPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/ShellBinPkg/Contributions.txt b/ShellBinPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/ShellBinPkg/Contributions.txt
+++ b/ShellBinPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/ShellPkg/Contributions.txt b/ShellPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/ShellPkg/Contributions.txt
+++ b/ShellPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/SourceLevelDebugPkg/Contributions.txt b/SourceLevelDebugPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/SourceLevelDebugPkg/Contributions.txt
+++ b/SourceLevelDebugPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/StdLib/Contributions.txt b/StdLib/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/StdLib/Contributions.txt
+++ b/StdLib/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/StdLibPrivateInternalFiles/Contributions.txt b/StdLibPrivateInternalFiles/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/StdLibPrivateInternalFiles/Contributions.txt
+++ b/StdLibPrivateInternalFiles/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================
diff --git a/UefiCpuPkg/Contributions.txt b/UefiCpuPkg/Contributions.txt
index 5dd8a47bad..1985677f4b 100644
--- a/UefiCpuPkg/Contributions.txt
+++ b/UefiCpuPkg/Contributions.txt
@@ -34,9 +34,9 @@ To make a contribution to a TianoCore project, follow these steps.
Contributions using other licenses might be accepted, but further
review will be required.
-=======================================
-= Change Description / Commit Message =
-=======================================
+=====================================================
+= Change Description / Commit Message / Patch Email =
+=====================================================
Your change description should use the standard format for a
commit message, and must include your "Signed-off-by" signature
@@ -44,7 +44,32 @@ and the "Contributed-under" message.
== Sample Change Description / Commit Message =
-=== Definitions for sample change description ===
+=== Start of sample patch email message ===
+
+From: Contributor Name <contributor@email.server>
+Subject: [PATCH] CodeModule: Brief-single-line-summary
+
+Full-commit-message
+
+Contributed-under: TianoCore Contribution Agreement 1.0
+Signed-off-by: Contributor Name <contributor@email.server>
+---
+
+An extra message for the patch email which will not be considered part
+of the commit message can be added here.
+
+Patch content inline or attached
+
+=== End of sample patch email message ===
+
+=== Notes for sample patch email ===
+
+* The first line of commit message is taken from the email's subject
+ line following [PATCH]. The remaining portion of the commit message
+ is the email's content until the '---' line.
+* git format-patch is one way to create this format
+
+=== Definitions for sample patch email ===
* "CodeModule" is a short idenfier for the affected code. For
example MdePkg, or MdeModulePkg UsbBusDxe.
@@ -58,15 +83,6 @@ and the "Contributed-under" message.
* "Signed-off-by" is the contributor's signature identifying them
by their real/legal name and their email address.
-=== Start of sample change description / commit message ===
-CodeModule: Brief-single-line-summary
-
-Full-commit-message
-
-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name <contributor@email.server>
-=== End of sample change description / commit message ===
-
========================================
= TianoCore Contribution Agreement 1.0 =
========================================