diff options
| -rw-r--r-- | BeagleBoardPkg/Sec/Clock.c | 6 | ||||
| -rwxr-xr-x | BeagleBoardPkg/Sec/Sec.c | 61 | ||||
| -rwxr-xr-x | BeagleBoardPkg/Sec/Sec.inf | 1 | ||||
| -rw-r--r-- | EmbeddedPkg/SerialDxe/SerialDxe.inf | 10 | ||||
| -rw-r--r-- | EmbeddedPkg/SerialDxe/SerialIo.c | 41 | ||||
| -rw-r--r-- | EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOut.c | 34 | ||||
| -rw-r--r-- | EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf | 7 | ||||
| -rw-r--r-- | Omap35xxPkg/Flash/Flash.c | 77 | ||||
| -rw-r--r-- | Omap35xxPkg/Gpio/Gpio.c | 4 | ||||
| -rw-r--r-- | Omap35xxPkg/InterruptDxe/HardwareInterrupt.c | 24 | ||||
| -rw-r--r-- | Omap35xxPkg/MMCHSDxe/MMCHS.c | 26 | ||||
| -rw-r--r-- | Omap35xxPkg/PciEmulation/PciEmulation.c | 6 | ||||
| -rw-r--r-- | Omap35xxPkg/TimerDxe/Timer.c | 441 |
13 files changed, 481 insertions, 257 deletions
diff --git a/BeagleBoardPkg/Sec/Clock.c b/BeagleBoardPkg/Sec/Clock.c index 2d814e49e9..8b05938bcb 100644 --- a/BeagleBoardPkg/Sec/Clock.c +++ b/BeagleBoardPkg/Sec/Clock.c @@ -25,9 +25,9 @@ ClockInit ( //DPLL1 - DPLL4 are configured part of Configuration header which OMAP3 ROM parses.
// Enable PLL5 and set to 120 MHz as a reference clock.
- MmioWrite32(CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13));
- MmioWrite32(CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1));
- MmioWrite32(CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE);
+ MmioWrite32 (CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13));
+ MmioWrite32 (CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1));
+ MmioWrite32 (CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE);
// Turn on functional & interface clocks to the USBHOST power domain
MmioOr32(CM_FCLKEN_USBHOST, CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE
diff --git a/BeagleBoardPkg/Sec/Sec.c b/BeagleBoardPkg/Sec/Sec.c index 448a713f4d..e3d299b82d 100755 --- a/BeagleBoardPkg/Sec/Sec.c +++ b/BeagleBoardPkg/Sec/Sec.c @@ -63,19 +63,19 @@ TimerInit ( | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);
// Set count & reload registers
- MmioWrite32(TimerBaseAddress + GPTIMER_TCRR, 0x00000000);
- MmioWrite32(TimerBaseAddress + GPTIMER_TLDR, 0x00000000);
+ MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000);
+ MmioWrite32 (TimerBaseAddress + GPTIMER_TLDR, 0x00000000);
// Disable interrupts
- MmioWrite32(TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE);
+ MmioWrite32 (TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE);
// Start Timer
- MmioWrite32(TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);
+ MmioWrite32 (TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);
//Disable OMAP Watchdog timer (WDT2)
- MmioWrite32(WDTIMER2_BASE + WSPR, 0xAAAA);
+ MmioWrite32 (WDTIMER2_BASE + WSPR, 0xAAAA);
DEBUG ((EFI_D_ERROR, "Magic delay to disable watchdog timers properly.\n"));
- MmioWrite32(WDTIMER2_BASE + WSPR, 0x5555);
+ MmioWrite32 (WDTIMER2_BASE + WSPR, 0x5555);
}
VOID
@@ -87,26 +87,26 @@ UartInit ( UINT32 UartBaseAddress = UartBase(Uart);
// Set MODE_SELECT=DISABLE before trying to initialize or modify DLL, DLH registers.
- MmioWrite32(UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_DISABLE);
+ MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_DISABLE);
// Put device in configuration mode.
- MmioWrite32(UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_ENABLE);
+ MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_ENABLE);
// Programmable divisor N = 48Mhz/16/115200 = 26
- MmioWrite32(UartBaseAddress + UART_DLL_REG, 26); // low divisor
- MmioWrite32(UartBaseAddress + UART_DLH_REG, 0); // high divisor
+ MmioWrite32 (UartBaseAddress + UART_DLL_REG, 3000000/FixedPcdGet64 (PcdUartDefaultBaudRate)); // low divisor
+ MmioWrite32 (UartBaseAddress + UART_DLH_REG, 0); // high divisor
// Enter into UART operational mode.
- MmioWrite32(UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_DISABLE | UART_LCR_CHAR_LENGTH_8);
+ MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_DISABLE | UART_LCR_CHAR_LENGTH_8);
// Force DTR and RTS output to active
- MmioWrite32(UartBaseAddress + UART_MCR_REG, UART_MCR_RTS_FORCE_ACTIVE | UART_MCR_DTR_FORCE_ACTIVE);
+ MmioWrite32 (UartBaseAddress + UART_MCR_REG, UART_MCR_RTS_FORCE_ACTIVE | UART_MCR_DTR_FORCE_ACTIVE);
// Clear & enable fifos
- MmioWrite32(UartBaseAddress + UART_FCR_REG, UART_FCR_TX_FIFO_CLEAR | UART_FCR_RX_FIFO_CLEAR | UART_FCR_FIFO_ENABLE);
+ MmioWrite32 (UartBaseAddress + UART_FCR_REG, UART_FCR_TX_FIFO_CLEAR | UART_FCR_RX_FIFO_CLEAR | UART_FCR_FIFO_ENABLE);
// Restore MODE_SELECT
- MmioWrite32(UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_UART_16X);
+ MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_UART_16X);
}
VOID
@@ -185,30 +185,30 @@ CEntryPoint ( VOID *HobBase;
//Set up Pin muxing.
- PadConfiguration();
+ PadConfiguration ();
// Set up system clocking
- ClockInit();
+ ClockInit ();
// Build a basic HOB list
HobBase = (VOID *)(UINTN)(FixedPcdGet32(PcdEmbeddedFdBaseAddress) + FixedPcdGet32(PcdEmbeddedFdSize));
- CreateHobList(MemoryBase, MemorySize, HobBase, StackBase);
+ CreateHobList (MemoryBase, MemorySize, HobBase, StackBase);
// Enable program flow prediction, if supported.
- ArmEnableBranchPrediction();
+ ArmEnableBranchPrediction ();
// Initialize CPU cache
- InitCache((UINT32)MemoryBase, (UINT32)MemorySize);
+ InitCache ((UINT32)MemoryBase, (UINT32)MemorySize);
// Add memory allocation hob for relocated FD
- BuildMemoryAllocationHob(FixedPcdGet32(PcdEmbeddedFdBaseAddress), FixedPcdGet32(PcdEmbeddedFdSize), EfiBootServicesData);
+ BuildMemoryAllocationHob (FixedPcdGet32(PcdEmbeddedFdBaseAddress), FixedPcdGet32(PcdEmbeddedFdSize), EfiBootServicesData);
// Add the FVs to the hob list
- BuildFvHob(PcdGet32(PcdFlashFvMainBase), PcdGet32(PcdFlashFvMainSize));
+ BuildFvHob (PcdGet32(PcdFlashFvMainBase), PcdGet32(PcdFlashFvMainSize));
// Start talking
- UartInit();
- DEBUG((EFI_D_ERROR, "UART Enabled\n"));
+ UartInit ();
+ DEBUG ((EFI_D_ERROR, "UART Enabled\n"));
DEBUG_CODE_BEGIN ();
//
@@ -251,33 +251,32 @@ CEntryPoint ( }
} - DEBUG_CODE_END ();
+
+ DEBUG_CODE_END ();
// Start up a free running time so that the timer lib will work
- TimerInit();
+ TimerInit ();
// SEC phase needs to run library constructors by hand.
- ExtractGuidedSectionLibConstructor();
- LzmaDecompressLibConstructor();
+ ExtractGuidedSectionLibConstructor ();
+ LzmaDecompressLibConstructor ();
// Build HOBs to pass up our version of stuff the DXE Core needs to save space
-#if 0
BuildPeCoffLoaderHob ();
BuildExtractSectionHob (
&gLzmaCustomDecompressGuid,
LzmaGuidedSectionGetInfo,
LzmaGuidedSectionExtraction
);
-#endif
DecompressFirstFv ();
// Load the DXE Core and transfer control to it
- LoadDxeCoreFromFv(NULL, 0);
+ LoadDxeCoreFromFv (NULL, 0);
// DXE Core should always load and never return
- ASSERT(FALSE);
+ ASSERT (FALSE);
}
diff --git a/BeagleBoardPkg/Sec/Sec.inf b/BeagleBoardPkg/Sec/Sec.inf index 87394504ac..a74dfb6bc3 100755 --- a/BeagleBoardPkg/Sec/Sec.inf +++ b/BeagleBoardPkg/Sec/Sec.inf @@ -53,6 +53,7 @@ gEmbeddedTokenSpaceGuid.PcdCacheEnable [FixedPcd] + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase diff --git a/EmbeddedPkg/SerialDxe/SerialDxe.inf b/EmbeddedPkg/SerialDxe/SerialDxe.inf index e2f46ecf1b..23139bddde 100644 --- a/EmbeddedPkg/SerialDxe/SerialDxe.inf +++ b/EmbeddedPkg/SerialDxe/SerialDxe.inf @@ -1,6 +1,6 @@ #/** @file
#
-# Component discription file for Bds module
+# Convert SerialLib into SerialIo protocol
#
# Copyright (c) 2008, Intel Corporation. <BR>
# All rights reserved. This program and the accompanying materials
@@ -47,7 +47,13 @@ [Protocols]
gEfiSerialIoProtocolGuid
gEfiDevicePathProtocolGuid
-
+[FixedPcd]
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits
+
+
[Depex]
TRUE
diff --git a/EmbeddedPkg/SerialDxe/SerialIo.c b/EmbeddedPkg/SerialDxe/SerialIo.c index aa9653bcf3..9543f1d1ec 100644 --- a/EmbeddedPkg/SerialDxe/SerialIo.c +++ b/EmbeddedPkg/SerialDxe/SerialIo.c @@ -23,6 +23,7 @@ #include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugLib.h>
#include <Library/SerialPortLib.h>
+#include <Library/PcdLib.h>
#include <Protocol/SerialIo.h>
@@ -189,7 +190,7 @@ SerialRead ( {
UINTN Count;
- Count = SerialPortWrite (Buffer, *BufferSize);
+ Count = SerialPortRead (Buffer, *BufferSize);
*BufferSize = Count;
return (Count == 0) ? EFI_DEVICE_ERROR : EFI_SUCCESS;
}
@@ -201,13 +202,13 @@ EFI_HANDLE gHandle = NULL; // Template used to initailize the GDB Serial IO protocols
//
EFI_SERIAL_IO_MODE gSerialIoMode = {
- 0, // ControlMask
- 0, // Timeout
- 0, // BaudRate
- 1, // RceiveFifoDepth
- 0, // DataBits
- 0, // Parity
- 0 // StopBits
+ 0, // ControlMask
+ 0, // Timeout
+ FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate
+ 1, // RceiveFifoDepth
+ FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits
+ FixedPcdGet8 (PcdUartDefaultParity), // Parity
+ FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits
};
@@ -222,6 +223,28 @@ EFI_SERIAL_IO_PROTOCOL gSerialIoTemplate = { &gSerialIoMode
};
+typedef struct {
+ VENDOR_DEVICE_PATH Guid;
+ UART_DEVICE_PATH Uart;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} SIMPLE_TEXT_OUT_DEVICE_PATH;
+
+SIMPLE_TEXT_OUT_DEVICE_PATH mDevicePath = {
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, sizeof (VENDOR_DEVICE_PATH), 0},
+ EFI_CALLER_ID_GUID // Use the drivers GUID
+ },
+ {
+ { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, sizeof (UART_DEVICE_PATH), 0},
+ 0, // Reserved
+ FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate
+ FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits
+ FixedPcdGet8 (PcdUartDefaultParity), // Parity (N)
+ FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits
+ },
+ { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, sizeof (EFI_DEVICE_PATH_PROTOCOL), 0}
+};
+
/**
Initialize the state information for the Serial Io Protocol
@@ -248,7 +271,7 @@ SerialDxeInitialize ( Status = gBS->InstallMultipleProtocolInterfaces (
&gHandle,
&gEfiSerialIoProtocolGuid, &gSerialIoTemplate,
- &gEfiDevicePathProtocolGuid, NULL, // BugBug: Need a device path
+ &gEfiDevicePathProtocolGuid, &mDevicePath,
NULL
);
ASSERT_EFI_ERROR (Status);
diff --git a/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOut.c b/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOut.c index f491de6e95..bdc67fbda0 100644 --- a/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOut.c +++ b/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOut.c @@ -64,10 +64,12 @@ #include <Library/MemoryAllocationLib.h>
#include <Library/DebugLib.h>
#include <Library/SerialPortLib.h>
+#include <Library/PcdLib.h>
#include <Protocol/SerialIo.h>
#include <Protocol/SimpleTextIn.h>
#include <Protocol/SimpleTextOut.h>
+#include <Protocol/DevicePath.h>
#define MODE0_COLUMN_COUNT 80
@@ -198,7 +200,30 @@ EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL mSimpleTextOut = { &mSimpleTextOutMode
};
- EFI_HANDLE mInstallHandle = NULL;
+EFI_HANDLE mInstallHandle = NULL;
+
+typedef struct {
+ VENDOR_DEVICE_PATH Guid;
+ UART_DEVICE_PATH Uart;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} SIMPLE_TEXT_OUT_DEVICE_PATH;
+
+SIMPLE_TEXT_OUT_DEVICE_PATH mDevicePath = {
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, sizeof (VENDOR_DEVICE_PATH), 0},
+ EFI_CALLER_ID_GUID
+ },
+ {
+ { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, sizeof (UART_DEVICE_PATH), 0},
+ 0, // Reserved
+ FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate
+ FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits
+ FixedPcdGet8 (PcdUartDefaultParity), // Parity (N)
+ FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits
+ },
+ { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, sizeof (EFI_DEVICE_PATH_PROTOCOL), 0}
+};
+
@@ -271,6 +296,10 @@ ReadKeyStroke ( {
CHAR8 Char;
+ if (!SerialPortPoll ()) {
+ return EFI_NOT_READY;
+ }
+
SerialPortRead ((UINT8 *)&Char, 1);
//
@@ -660,7 +689,8 @@ SimpleTextInOutEntryPoint ( &mInstallHandle,
&gEfiSimpleTextInProtocolGuid, &mSimpleTextIn,
&gEfiSimpleTextOutProtocolGuid, &mSimpleTextOut,
- NULL
+ &gEfiDevicePathProtocolGuid, &mDevicePath,
+ NULL
);
if (!EFI_ERROR (Status)) {
gST->ConOut = &mSimpleTextOut;
diff --git a/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf b/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf index 9799d550c3..e06a83d4e7 100644 --- a/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf +++ b/EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf @@ -51,5 +51,12 @@ gEfiSerialIoProtocolGuid
gEfiDevicePathProtocolGuid
+[FixedPcd]
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits
+
+
[depex]
TRUE
diff --git a/Omap35xxPkg/Flash/Flash.c b/Omap35xxPkg/Flash/Flash.c index 698003b7a3..c8c34c9a41 100644 --- a/Omap35xxPkg/Flash/Flash.c +++ b/Omap35xxPkg/Flash/Flash.c @@ -22,21 +22,36 @@ NAND_FLASH_INFO *gNandFlashInfo = NULL; UINT8 *gEccCode; UINTN gNum512BytesChunks = 0; -//
-// Device path for SemiHosting. It contains our autogened Caller ID GUID.
-//
-typedef struct {
- VENDOR_DEVICE_PATH Guid;
- EFI_DEVICE_PATH_PROTOCOL End;
-} FLASH_DEVICE_PATH;
-
-FLASH_DEVICE_PATH gDevicePath = {
- {
- { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, sizeof (VENDOR_DEVICE_PATH), 0 },
- EFI_CALLER_ID_GUID
- },
- { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, sizeof (EFI_DEVICE_PATH_PROTOCOL), 0}
-};
+// + +// Device path for SemiHosting. It contains our autogened Caller ID GUID. + +// + +typedef struct { + + VENDOR_DEVICE_PATH Guid; + + EFI_DEVICE_PATH_PROTOCOL End; + +} FLASH_DEVICE_PATH; + + + +FLASH_DEVICE_PATH gDevicePath = { + + { + + { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, sizeof (VENDOR_DEVICE_PATH), 0 }, + + EFI_CALLER_ID_GUID + + }, + + { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, sizeof (EFI_DEVICE_PATH_PROTOCOL), 0} + +}; + //Actual page address = Column address + Page address + Block address. @@ -110,26 +125,26 @@ GpmcInit ( ) { //Enable Smart-idle mode. - MmioWrite32(GPMC_SYSCONFIG, SMARTIDLEMODE); + MmioWrite32 (GPMC_SYSCONFIG, SMARTIDLEMODE); //Set IRQSTATUS and IRQENABLE to the reset value - MmioWrite32(GPMC_IRQSTATUS, 0x0); - MmioWrite32(GPMC_IRQENABLE, 0x0); + MmioWrite32 (GPMC_IRQSTATUS, 0x0); + MmioWrite32 (GPMC_IRQENABLE, 0x0); //Disable GPMC timeout control. - MmioWrite32(GPMC_TIMEOUT_CONTROL, TIMEOUTDISABLE); + MmioWrite32 (GPMC_TIMEOUT_CONTROL, TIMEOUTDISABLE); //Set WRITEPROTECT bit to enable write access. - MmioWrite32(GPMC_CONFIG, WRITEPROTECT_HIGH); + MmioWrite32 (GPMC_CONFIG, WRITEPROTECT_HIGH); //NOTE: Following GPMC_CONFIGi_0 register settings are taken from u-boot memory dump. - MmioWrite32(GPMC_CONFIG1_0, DEVICETYPE_NAND | DEVICESIZE_X16); - MmioWrite32(GPMC_CONFIG2_0, CSRDOFFTIME | CSWROFFTIME); - MmioWrite32(GPMC_CONFIG3_0, ADVRDOFFTIME | ADVWROFFTIME); - MmioWrite32(GPMC_CONFIG4_0, OEONTIME | OEOFFTIME | WEONTIME | WEOFFTIME); - MmioWrite32(GPMC_CONFIG5_0, RDCYCLETIME | WRCYCLETIME | RDACCESSTIME | PAGEBURSTACCESSTIME); - MmioWrite32(GPMC_CONFIG6_0, WRACCESSTIME | WRDATAONADMUXBUS | CYCLE2CYCLEDELAY | CYCLE2CYCLESAMECSEN); - MmioWrite32(GPMC_CONFIG7_0, MASKADDRESS_128MB | CSVALID | BASEADDRESS); + MmioWrite32 (GPMC_CONFIG1_0, DEVICETYPE_NAND | DEVICESIZE_X16); + MmioWrite32 (GPMC_CONFIG2_0, CSRDOFFTIME | CSWROFFTIME); + MmioWrite32 (GPMC_CONFIG3_0, ADVRDOFFTIME | ADVWROFFTIME); + MmioWrite32 (GPMC_CONFIG4_0, OEONTIME | OEOFFTIME | WEONTIME | WEOFFTIME); + MmioWrite32 (GPMC_CONFIG5_0, RDCYCLETIME | WRCYCLETIME | RDACCESSTIME | PAGEBURSTACCESSTIME); + MmioWrite32 (GPMC_CONFIG6_0, WRACCESSTIME | WRDATAONADMUXBUS | CYCLE2CYCLEDELAY | CYCLE2CYCLESAMECSEN); + MmioWrite32 (GPMC_CONFIG7_0, MASKADDRESS_128MB | CSVALID | BASEADDRESS); } EFI_STATUS @@ -215,7 +230,7 @@ NandConfigureEcc ( ) { //Define ECC size 0 and size 1 to 512 bytes - MmioWrite32(GPMC_ECC_SIZE_CONFIG, (ECCSIZE0_512BYTES | ECCSIZE1_512BYTES)); + MmioWrite32 (GPMC_ECC_SIZE_CONFIG, (ECCSIZE0_512BYTES | ECCSIZE1_512BYTES)); } VOID @@ -224,10 +239,10 @@ NandEnableEcc ( ) { //Clear all the ECC result registers and select ECC result register 1 - MmioWrite32(GPMC_ECC_CONTROL, (ECCCLEAR | ECCPOINTER_REG1)); + MmioWrite32 (GPMC_ECC_CONTROL, (ECCCLEAR | ECCPOINTER_REG1)); //Enable ECC engine on CS0 - MmioWrite32(GPMC_ECC_CONFIG, (ECCENABLE | ECCCS_0 | ECC16B)); + MmioWrite32 (GPMC_ECC_CONFIG, (ECCENABLE | ECCCS_0 | ECC16B)); } VOID @@ -236,7 +251,7 @@ NandDisableEcc ( ) { //Turn off ECC engine. - MmioWrite32(GPMC_ECC_CONFIG, ECCDISABLE); + MmioWrite32 (GPMC_ECC_CONFIG, ECCDISABLE); } VOID diff --git a/Omap35xxPkg/Gpio/Gpio.c b/Omap35xxPkg/Gpio/Gpio.c index 7bc5478933..107c93916a 100644 --- a/Omap35xxPkg/Gpio/Gpio.c +++ b/Omap35xxPkg/Gpio/Gpio.c @@ -79,12 +79,12 @@ Set ( break; case GPIO_MODE_OUTPUT_0: - MmioWrite32(ClearDataOutRegister, GPIO_CLEARDATAOUT_BIT(Pin)); + MmioWrite32 (ClearDataOutRegister, GPIO_CLEARDATAOUT_BIT(Pin)); MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_OUTPUT(Pin)); break; case GPIO_MODE_OUTPUT_1: - MmioWrite32(SetDataOutRegister, GPIO_SETDATAOUT_BIT(Pin)); + MmioWrite32 (SetDataOutRegister, GPIO_SETDATAOUT_BIT(Pin)); MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_OUTPUT(Pin)); break; diff --git a/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c b/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c index feb5b26dfe..6e30eb7e67 100644 --- a/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c +++ b/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c @@ -54,10 +54,10 @@ ExitBootServicesEvent ( )
{
// Disable all interrupts
- MmioWrite32(INTCPS_MIR(0), 0xFFFFFFFF);
- MmioWrite32(INTCPS_MIR(1), 0xFFFFFFFF);
- MmioWrite32(INTCPS_MIR(2), 0xFFFFFFFF);
- MmioWrite32(INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
+ MmioWrite32 (INTCPS_MIR(0), 0xFFFFFFFF);
+ MmioWrite32 (INTCPS_MIR(1), 0xFFFFFFFF);
+ MmioWrite32 (INTCPS_MIR(2), 0xFFFFFFFF);
+ MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
}
/**
@@ -125,7 +125,7 @@ EnableInterruptSource ( Bank = Source / 32;
Bit = 1UL << (Source % 32);
- MmioWrite32(INTCPS_MIR_CLEAR(Bank), Bit);
+ MmioWrite32 (INTCPS_MIR_CLEAR(Bank), Bit);
return EFI_SUCCESS;
}
@@ -159,7 +159,7 @@ DisableInterruptSource( Bank = Source / 32;
Bit = 1UL << (Source % 32);
- MmioWrite32(INTCPS_MIR_SET(Bank), Bit);
+ MmioWrite32 (INTCPS_MIR_SET(Bank), Bit);
return EFI_SUCCESS;
}
@@ -235,7 +235,7 @@ IrqInterruptHandler ( Vector = MmioRead32(INTCPS_SIR_IRQ) & INTCPS_SIR_IRQ_MASK;
// Needed to prevent infinite nesting when Time Driver lowers TPL
- MmioWrite32(INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
+ MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
InterruptHandler = gRegisteredInterruptHandlers[Vector];
if (InterruptHandler != NULL) {
@@ -244,7 +244,7 @@ IrqInterruptHandler ( }
// Needed to clear after running the handler
- MmioWrite32(INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
+ MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
}
//
@@ -316,10 +316,10 @@ InterruptDxeInitialize ( ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);
// Make sure all interrupts are disabled by default.
- MmioWrite32(INTCPS_MIR(0), 0xFFFFFFFF);
- MmioWrite32(INTCPS_MIR(1), 0xFFFFFFFF);
- MmioWrite32(INTCPS_MIR(2), 0xFFFFFFFF);
- MmioWrite32(INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
+ MmioWrite32 (INTCPS_MIR(0), 0xFFFFFFFF);
+ MmioWrite32 (INTCPS_MIR(1), 0xFFFFFFFF);
+ MmioWrite32 (INTCPS_MIR(2), 0xFFFFFFFF);
+ MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
Status = gBS->InstallMultipleProtocolInterfaces(&gHardwareInterruptHandle,
&gHardwareInterruptProtocolGuid, &gHardwareInterruptProtocol,
diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.c b/Omap35xxPkg/MMCHSDxe/MMCHS.c index 763e1e9987..d9739f522e 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.c +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.c @@ -113,22 +113,22 @@ SendCmd ( while ((MmioRead32(MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED); //Provide the block size. - MmioWrite32(MMCHS_BLK, BLEN_512BYTES); + MmioWrite32 (MMCHS_BLK, BLEN_512BYTES); //Setting Data timeout counter value to max value. MmioAndThenOr32(MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL); //Clear Status register. - MmioWrite32(MMCHS_STAT, 0xFFFFFFFF); + MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF); //Set command argument register - MmioWrite32(MMCHS_ARG, CmdArgument); + MmioWrite32 (MMCHS_ARG, CmdArgument); //Enable interrupt enable events to occur - MmioWrite32(MMCHS_IE, CmdInterruptEnableVal); + MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal); //Send a command - MmioWrite32(MMCHS_CMD, Cmd); + MmioWrite32 (MMCHS_CMD, Cmd); //Check for the command status. while (RetryCount < MAX_RETRY_COUNT) { @@ -149,7 +149,7 @@ SendCmd ( //Check if command is completed. if ((MmcStatus & CC) == CC) { - MmioWrite32(MMCHS_STAT, CC); + MmioWrite32 (MMCHS_STAT, CC); break; } @@ -354,12 +354,12 @@ InitializeMMCHS ( MmioOr32(CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1)); //Software reset of the MMCHS host controller. - MmioWrite32(MMCHS_SYSCONFIG, SOFTRESET); + MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET); gBS->Stall(1000); while ((MmioRead32(MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE); //Soft reset for all. - MmioWrite32(MMCHS_SYSCTL, SRA); + MmioWrite32 (MMCHS_SYSCTL, SRA); gBS->Stall(1000); while ((MmioRead32(MMCHS_SYSCTL) & SRA) != 0x0); @@ -373,7 +373,7 @@ InitializeMMCHS ( //MMCHS Controller default initialization MmioOr32(MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF)); - MmioWrite32(MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF)); + MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF)); //Enable internal clock MmioOr32(MMCHS_SYSCTL, ICE); @@ -403,12 +403,12 @@ PerformCardIdenfication ( BOOLEAN SDCmd8Supported = FALSE; //Enable interrupts. - MmioWrite32(MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN | + MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN)); //Controller INIT procedure start. MmioOr32(MMCHS_CON, INIT); - MmioWrite32(MMCHS_CMD, 0x00000000); + MmioWrite32 (MMCHS_CMD, 0x00000000); while (!(MmioRead32(MMCHS_STAT) & CC)); //Wait for 1 ms @@ -418,7 +418,7 @@ PerformCardIdenfication ( MmioOr32(MMCHS_STAT, CC); //Retry INIT procedure. - MmioWrite32(MMCHS_CMD, 0x00000000); + MmioWrite32 (MMCHS_CMD, 0x00000000); while (!(MmioRead32(MMCHS_STAT) & CC)); //End initialization sequence @@ -713,7 +713,7 @@ WriteBlockData( //Write block worth of data. for (Count = 0; Count < DataSize; Count++) { - MmioWrite32(MMCHS_DATA, *DataBuffer++); + MmioWrite32 (MMCHS_DATA, *DataBuffer++); } break; diff --git a/Omap35xxPkg/PciEmulation/PciEmulation.c b/Omap35xxPkg/PciEmulation/PciEmulation.c index fa44570b4c..bdba40353f 100644 --- a/Omap35xxPkg/PciEmulation/PciEmulation.c +++ b/Omap35xxPkg/PciEmulation/PciEmulation.c @@ -63,12 +63,12 @@ ConfigureUSBHost ( UINT8 Data = 0; // Take USB host out of force-standby mode - MmioWrite32(UHH_SYSCONFIG, UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY + MmioWrite32 (UHH_SYSCONFIG, UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY | UHH_SYSCONFIG_CLOCKACTIVITY_ON | UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY | UHH_SYSCONFIG_ENAWAKEUP_ENABLE | UHH_SYSCONFIG_AUTOIDLE_ALWAYS_RUN); - MmioWrite32(UHH_HOSTCONFIG, UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT + MmioWrite32 (UHH_HOSTCONFIG, UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT | UHH_HOSTCONFIG_P2_CONNECT_STATUS_DISCONNECT | UHH_HOSTCONFIG_P1_CONNECT_STATUS_DISCONNECT | UHH_HOSTCONFIG_ENA_INCR_ALIGN_DISABLE @@ -80,7 +80,7 @@ ConfigureUSBHost ( // USB reset (GPIO 147 - Port 5 pin 19) output high MmioAnd32(GPIO5_BASE + GPIO_OE, ~BIT19); - MmioWrite32(GPIO5_BASE + GPIO_SETDATAOUT, BIT19); + MmioWrite32 (GPIO5_BASE + GPIO_SETDATAOUT, BIT19); // Get the Power IC protocol. Status = gBS->LocateProtocol(&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); diff --git a/Omap35xxPkg/TimerDxe/Timer.c b/Omap35xxPkg/TimerDxe/Timer.c index f43b24bd37..2753b98d1a 100644 --- a/Omap35xxPkg/TimerDxe/Timer.c +++ b/Omap35xxPkg/TimerDxe/Timer.c @@ -54,15 +54,24 @@ volatile UINT32 TIER; volatile UINTN gVector; -/**
- C Interrupt Handler calledin the interrupt context when Source interrupt is active.
-
- @param Source Source of the interrupt. Hardware routing off a specific platform defines
- what source means.
- @param SystemContext Pointer to system register context. Mostly used by debuggers and will
- update the system context after the return from the interrupt if
- modified. Don't change these values unless you know what you are doing
-
+/** + + C Interrupt Handler calledin the interrupt context when Source interrupt is active. + + + + @param Source Source of the interrupt. Hardware routing off a specific platform defines + + what source means. + + @param SystemContext Pointer to system register context. Mostly used by debuggers and will + + update the system context after the return from the interrupt if + + modified. Don't change these values unless you know what you are doing + + + **/ VOID EFIAPI @@ -71,14 +80,22 @@ TimerInterruptHandler ( IN EFI_SYSTEM_CONTEXT SystemContext ) { - EFI_TPL OriginalTPL;
-
- //
- // DXE core uses this callback for the EFI timer tick. The DXE core uses locks
- // that raise to TPL_HIGH and then restore back to current level. Thus we need
- // to make sure TPL level is set to TPL_HIGH while we are handling the timer tick.
- //
- OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+ EFI_TPL OriginalTPL; + + + + // + + // DXE core uses this callback for the EFI timer tick. The DXE core uses locks + + // that raise to TPL_HIGH and then restore back to current level. Thus we need + + // to make sure TPL level is set to TPL_HIGH while we are handling the timer tick. + + // + + OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL); + if (mTimerPeriodicCallback) { mTimerPeriodicCallback(SystemContext); @@ -89,7 +106,7 @@ TimerInterruptHandler ( } // Clear all timer interrupts - MmioWrite32(TISR, TISR_CLEAR_ALL); + MmioWrite32 (TISR, TISR_CLEAR_ALL); // Poll interrupt status bits to ensure clearing while ((MmioRead32(TISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING); @@ -97,35 +114,64 @@ TimerInterruptHandler ( gBS->RestoreTPL (OriginalTPL); } -/**
- This function registers the handler NotifyFunction so it is called every time
- the timer interrupt fires. It also passes the amount of time since the last
- handler call to the NotifyFunction. If NotifyFunction is NULL, then the
- handler is unregistered. If the handler is registered, then EFI_SUCCESS is
- returned. If the CPU does not support registering a timer interrupt handler,
- then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
- when a handler is already registered, then EFI_ALREADY_STARTED is returned.
- If an attempt is made to unregister a handler when a handler is not registered,
- then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
- register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
- is returned.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
- @param NotifyFunction The function to call when a timer interrupt fires. This
- function executes at TPL_HIGH_LEVEL. The DXE Core will
- register a handler for the timer interrupt, so it can know
- how much time has passed. This information is used to
- signal timer based events. NULL will unregister the handler.
-
- @retval EFI_SUCCESS The timer handler was registered.
- @retval EFI_UNSUPPORTED The platform does not support timer interrupts.
- @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
- registered.
- @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
- previously registered.
- @retval EFI_DEVICE_ERROR The timer handler could not be registered.
-
-**/
+/** + + This function registers the handler NotifyFunction so it is called every time + + the timer interrupt fires. It also passes the amount of time since the last + + handler call to the NotifyFunction. If NotifyFunction is NULL, then the + + handler is unregistered. If the handler is registered, then EFI_SUCCESS is + + returned. If the CPU does not support registering a timer interrupt handler, + + then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler + + when a handler is already registered, then EFI_ALREADY_STARTED is returned. + + If an attempt is made to unregister a handler when a handler is not registered, + + then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to + + register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR + + is returned. + + + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + + @param NotifyFunction The function to call when a timer interrupt fires. This + + function executes at TPL_HIGH_LEVEL. The DXE Core will + + register a handler for the timer interrupt, so it can know + + how much time has passed. This information is used to + + signal timer based events. NULL will unregister the handler. + + + + @retval EFI_SUCCESS The timer handler was registered. + + @retval EFI_UNSUPPORTED The platform does not support timer interrupts. + + @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already + + registered. + + @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not + + previously registered. + + @retval EFI_DEVICE_ERROR The timer handler could not be registered. + + + +**/ + EFI_STATUS EFIAPI TimerDriverRegisterHandler ( @@ -146,31 +192,56 @@ TimerDriverRegisterHandler ( return EFI_SUCCESS; } -/**
- This function adjusts the period of timer interrupts to the value specified
- by TimerPeriod. If the timer period is updated, then the selected timer
- period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
- the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
- If an error occurs while attempting to update the timer period, then the
- timer hardware will be put back in its state prior to this call, and
- EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
- is disabled. This is not the same as disabling the CPU's interrupts.
- Instead, it must either turn off the timer hardware, or it must adjust the
- interrupt controller so that a CPU interrupt is not generated when the timer
- interrupt fires.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
- @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If
- the timer hardware is not programmable, then EFI_UNSUPPORTED is
- returned. If the timer is programmable, then the timer period
- will be rounded up to the nearest timer period that is supported
- by the timer hardware. If TimerPeriod is set to 0, then the
- timer interrupts will be disabled.
-
- @retval EFI_SUCCESS The timer period was changed.
- @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
- @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
-
+/** + + This function adjusts the period of timer interrupts to the value specified + + by TimerPeriod. If the timer period is updated, then the selected timer + + period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If + + the timer hardware is not programmable, then EFI_UNSUPPORTED is returned. + + If an error occurs while attempting to update the timer period, then the + + timer hardware will be put back in its state prior to this call, and + + EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt + + is disabled. This is not the same as disabling the CPU's interrupts. + + Instead, it must either turn off the timer hardware, or it must adjust the + + interrupt controller so that a CPU interrupt is not generated when the timer + + interrupt fires. + + + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + + @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If + + the timer hardware is not programmable, then EFI_UNSUPPORTED is + + returned. If the timer is programmable, then the timer period + + will be rounded up to the nearest timer period that is supported + + by the timer hardware. If TimerPeriod is set to 0, then the + + timer interrupts will be disabled. + + + + @retval EFI_SUCCESS The timer period was changed. + + @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt. + + @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error. + + + **/ EFI_STATUS EFIAPI @@ -185,7 +256,7 @@ TimerDriverSetTimerPeriod ( if (TimerPeriod == 0) { // Turn off GPTIMER3 - MmioWrite32(TCLR, TCLR_ST_OFF); + MmioWrite32 (TCLR, TCLR_ST_OFF); Status = gInterrupt->DisableInterruptSource(gInterrupt, gVector); } else { @@ -194,14 +265,14 @@ TimerDriverSetTimerPeriod ( // Set GPTIMER3 Load register LoadValue = (INT32) -TimerCount; - MmioWrite32(TLDR, LoadValue); - MmioWrite32(TCRR, LoadValue); + MmioWrite32 (TLDR, LoadValue); + MmioWrite32 (TCRR, LoadValue); // Enable Overflow interrupt - MmioWrite32(TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE); + MmioWrite32 (TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE); // Turn on GPTIMER3, it will reload at overflow - MmioWrite32(TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); + MmioWrite32 (TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); Status = gInterrupt->EnableInterruptSource(gInterrupt, gVector); } @@ -214,19 +285,32 @@ TimerDriverSetTimerPeriod ( } -/**
- This function retrieves the period of timer interrupts in 100 ns units,
- returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
- is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
- returned, then the timer is currently disabled.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
- @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If
- 0 is returned, then the timer is currently disabled.
-
- @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
- @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
-
+/** + + This function retrieves the period of timer interrupts in 100 ns units, + + returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod + + is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is + + returned, then the timer is currently disabled. + + + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + + @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If + + 0 is returned, then the timer is currently disabled. + + + + @retval EFI_SUCCESS The timer period was returned in TimerPeriod. + + @retval EFI_INVALID_PARAMETER TimerPeriod is NULL. + + + **/ EFI_STATUS EFIAPI @@ -243,20 +327,34 @@ TimerDriverGetTimerPeriod ( return EFI_SUCCESS; } -/**
- This function generates a soft timer interrupt. If the platform does not support soft
- timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
- If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
- service, then a soft timer interrupt will be generated. If the timer interrupt is
- enabled when this service is called, then the registered handler will be invoked. The
- registered handler should not be able to distinguish a hardware-generated timer
- interrupt from a software-generated timer interrupt.
-
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.
-
- @retval EFI_SUCCESS The soft timer interrupt was generated.
- @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.
-
+/** + + This function generates a soft timer interrupt. If the platform does not support soft + + timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned. + + If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler() + + service, then a soft timer interrupt will be generated. If the timer interrupt is + + enabled when this service is called, then the registered handler will be invoked. The + + registered handler should not be able to distinguish a hardware-generated timer + + interrupt from a software-generated timer interrupt. + + + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + + + + @retval EFI_SUCCESS The soft timer interrupt was generated. + + @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts. + + + **/ EFI_STATUS EFIAPI @@ -289,39 +387,72 @@ TimerDriverRegisterPeriodicCallback ( } -/**
- Interface stucture for the Timer Architectural Protocol.
-
- @par Protocol Description:
- This protocol provides the services to initialize a periodic timer
- interrupt, and to register a handler that is called each time the timer
- interrupt fires. It may also provide a service to adjust the rate of the
- periodic timer interrupt. When a timer interrupt occurs, the handler is
- passed the amount of time that has passed since the previous timer
- interrupt.
-
- @param RegisterHandler
- Registers a handler that will be called each time the
- timer interrupt fires. TimerPeriod defines the minimum
- time between timer interrupts, so TimerPeriod will also
- be the minimum time between calls to the registered
- handler.
-
- @param SetTimerPeriod
- Sets the period of the timer interrupt in 100 nS units.
- This function is optional, and may return EFI_UNSUPPORTED.
- If this function is supported, then the timer period will
- be rounded up to the nearest supported timer period.
-
- @param GetTimerPeriod
- Retrieves the period of the timer interrupt in 100 nS units.
-
- @param GenerateSoftInterrupt
- Generates a soft timer interrupt that simulates the firing of
- the timer interrupt. This service can be used to invoke the
- registered handler if the timer interrupt has been masked for
- a period of time.
-
+/** + + Interface stucture for the Timer Architectural Protocol. + + + + @par Protocol Description: + + This protocol provides the services to initialize a periodic timer + + interrupt, and to register a handler that is called each time the timer + + interrupt fires. It may also provide a service to adjust the rate of the + + periodic timer interrupt. When a timer interrupt occurs, the handler is + + passed the amount of time that has passed since the previous timer + + interrupt. + + + + @param RegisterHandler + + Registers a handler that will be called each time the + + timer interrupt fires. TimerPeriod defines the minimum + + time between timer interrupts, so TimerPeriod will also + + be the minimum time between calls to the registered + + handler. + + + + @param SetTimerPeriod + + Sets the period of the timer interrupt in 100 nS units. + + This function is optional, and may return EFI_UNSUPPORTED. + + If this function is supported, then the timer period will + + be rounded up to the nearest supported timer period. + + + + @param GetTimerPeriod + + Retrieves the period of the timer interrupt in 100 nS units. + + + + @param GenerateSoftInterrupt + + Generates a soft timer interrupt that simulates the firing of + + the timer interrupt. This service can be used to invoke the + + registered handler if the timer interrupt has been masked for + + a period of time. + + + **/ EFI_TIMER_ARCH_PROTOCOL gTimer = { TimerDriverRegisterHandler, @@ -335,18 +466,30 @@ TIMER_DEBUG_SUPPORT_PROTOCOL gTimerDebugSupport = { }; -/**
- Initialize the state information for the Timer Architectural Protocol and
- the Timer Debug support protocol that allows the debugger to break into a
- running program.
-
- @param ImageHandle of the loaded driver
- @param SystemTable Pointer to the System Table
-
- @retval EFI_SUCCESS Protocol registered
- @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
- @retval EFI_DEVICE_ERROR Hardware problems
-
+/** + + Initialize the state information for the Timer Architectural Protocol and + + the Timer Debug support protocol that allows the debugger to break into a + + running program. + + + + @param ImageHandle of the loaded driver + + @param SystemTable Pointer to the System Table + + + + @retval EFI_SUCCESS Protocol registered + + @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure + + @retval EFI_DEVICE_ERROR Hardware problems + + + **/ EFI_STATUS EFIAPI |