summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.c8
-rw-r--r--OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.h74
-rw-r--r--OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430.h2
3 files changed, 39 insertions, 45 deletions
diff --git a/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.c b/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.c
index 8e18910379..43b18113d2 100644
--- a/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.c
+++ b/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.c
@@ -822,7 +822,7 @@ Returns:
//
// disable Interrupt
//
- DeviceControlValue |= bit (1);
+ DeviceControlValue |= BIT1;
WritePortB (
AtapiScsiPrivate->PciIo,
AtapiScsiPrivate->IoPort->Alt.DeviceControl,
@@ -922,7 +922,7 @@ Returns:
//
// bit7 and bit5 are both set to 1 for backward compatibility
//
- DeviceSelect = (UINT8) (((bit (7) | bit (5)) | (Target << 4)));
+ DeviceSelect = (UINT8) (((BIT7 | BIT5) | (Target << 4)));
WritePortB (AtapiScsiPrivate->PciIo, AtapiScsiPrivate->IoPort->Head, DeviceSelect);
Command = ATAPI_SOFT_RESET_CMD;
@@ -1336,7 +1336,7 @@ Returns:
//
// disable Interrupt
//
- DeviceControlValue |= bit (1);
+ DeviceControlValue |= BIT1;
WritePortB (
AtapiScsiPrivate->PciIo,
AtapiScsiPrivate->IoPort->Alt.DeviceControl,
@@ -1438,7 +1438,7 @@ Returns:
//
// bit7 and bit5 are both set to 1 for backward compatibility
//
- DeviceSelect = (UINT8) (((bit (7) | bit (5)) | (TargetId << 4)));
+ DeviceSelect = (UINT8) ((BIT7 | BIT5) | (TargetId << 4));
WritePortB (AtapiScsiPrivate->PciIo, AtapiScsiPrivate->IoPort->Head, DeviceSelect);
Command = ATAPI_SOFT_RESET_CMD;
diff --git a/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.h b/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.h
index 78501f7f4a..9086dd9bdc 100644
--- a/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.h
+++ b/OptionRomPkg/AtapiPassThruDxe/AtapiPassThru.h
@@ -34,13 +34,7 @@
#include <Library/PcdLib.h>
#include <Library/DevicePathLib.h>
-#include <IndustryStandard/Pci22.h>
-
-
-///
-/// bit definition
-///
-#define bit(a) (1 << (a))
+#include <IndustryStandard/Pci.h>
#define MAX_TARGET_ID 4
@@ -212,31 +206,31 @@ typedef struct {
//
// ATA Err Reg bitmap
//
-#define BBK_ERR bit (7) ///< Bad block detected
-#define UNC_ERR bit (6) ///< Uncorrectable Data
-#define MC_ERR bit (5) ///< Media Change
-#define IDNF_ERR bit (4) ///< ID Not Found
-#define MCR_ERR bit (3) ///< Media Change Requested
-#define ABRT_ERR bit (2) ///< Aborted Command
-#define TK0NF_ERR bit (1) ///< Track 0 Not Found
-#define AMNF_ERR bit (0) ///< Address Mark Not Found
+#define BBK_ERR BIT7 ///< Bad block detected
+#define UNC_ERR BIT6 ///< Uncorrectable Data
+#define MC_ERR BIT5 ///< Media Change
+#define IDNF_ERR BIT4 ///< ID Not Found
+#define MCR_ERR BIT3 ///< Media Change Requested
+#define ABRT_ERR BIT2 ///< Aborted Command
+#define TK0NF_ERR BIT1 ///< Track 0 Not Found
+#define AMNF_ERR BIT0 ///< Address Mark Not Found
//
// ATAPI Err Reg bitmap
//
-#define SENSE_KEY_ERR (bit (7) | bit (6) | bit (5) | bit (4))
-#define EOM_ERR bit (1) ///< End of Media Detected
-#define ILI_ERR bit (0) ///< Illegal Length Indication
+#define SENSE_KEY_ERR (BIT7 | BIT6 | BIT5 | BIT4)
+#define EOM_ERR BIT1 ///< End of Media Detected
+#define ILI_ERR BIT0 ///< Illegal Length Indication
//
// Device/Head Reg
//
-#define LBA_MODE bit (6)
-#define DEV bit (4)
-#define HS3 bit (3)
-#define HS2 bit (2)
-#define HS1 bit (1)
-#define HS0 bit (0)
+#define LBA_MODE BIT6
+#define DEV BIT4
+#define HS3 BIT3
+#define HS2 BIT2
+#define HS1 BIT1
+#define HS0 BIT0
#define CHS_MODE (0)
#define DRV0 (0)
#define DRV1 (1)
@@ -246,34 +240,34 @@ typedef struct {
//
// Status Reg
//
-#define BSY bit (7) ///< Controller Busy
-#define DRDY bit (6) ///< Drive Ready
-#define DWF bit (5) ///< Drive Write Fault
-#define DSC bit (4) ///< Disk Seek Complete
-#define DRQ bit (3) ///< Data Request
-#define CORR bit (2) ///< Corrected Data
-#define IDX bit (1) ///< Index
-#define ERR bit (0) ///< Error
-#define CHECK bit (0) ///< Check bit for ATAPI Status Reg
+#define BSY BIT7 ///< Controller Busy
+#define DRDY BIT6 ///< Drive Ready
+#define DWF BIT5 ///< Drive Write Fault
+#define DSC BIT4 ///< Disk Seek Complete
+#define DRQ BIT3 ///< Data Request
+#define CORR BIT2 ///< Corrected Data
+#define IDX BIT1 ///< Index
+#define ERR BIT0 ///< Error
+#define CHECK BIT0 ///< Check bit for ATAPI Status Reg
//
// Device Control Reg
//
-#define SRST bit (2) ///< Software Reset
-#define IEN_L bit (1) ///< Interrupt Enable
+#define SRST BIT2 ///< Software Reset
+#define IEN_L BIT1 ///< Interrupt Enable
//
// ATAPI Feature Register
//
-#define OVERLAP bit (1)
-#define DMA bit (0)
+#define OVERLAP BIT1
+#define DMA BIT0
//
// ATAPI Interrupt Reason Reson Reg (ATA Sector Count Register)
//
-#define RELEASE bit (2)
-#define IO bit (1)
-#define CoD bit (0)
+#define RELEASE BIT2
+#define IO BIT1
+#define CoD BIT0
#define PACKET_CMD 0xA0
diff --git a/OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430.h b/OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430.h
index c426cb2ab7..90886f0337 100644
--- a/OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430.h
+++ b/OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430.h
@@ -40,7 +40,7 @@
#include <Library/DevicePathLib.h>
#include <Library/TimerLib.h>
-#include <IndustryStandard/Pci22.h>
+#include <IndustryStandard/Pci.h>
//
// Cirrus Logic 5430 PCI Configuration Header values
//