summaryrefslogtreecommitdiff
path: root/AppPkg/Applications/Python/Python-2.7.10/README
diff options
context:
space:
mode:
Diffstat (limited to 'AppPkg/Applications/Python/Python-2.7.10/README')
-rw-r--r--AppPkg/Applications/Python/Python-2.7.10/README1236
1 files changed, 1236 insertions, 0 deletions
diff --git a/AppPkg/Applications/Python/Python-2.7.10/README b/AppPkg/Applications/Python/Python-2.7.10/README
new file mode 100644
index 0000000000..b5e2f298c5
--- /dev/null
+++ b/AppPkg/Applications/Python/Python-2.7.10/README
@@ -0,0 +1,1236 @@
+This is Python version 2.7.10
+=============================
+
+Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+2012, 2013, 2014, 2015 Python Software Foundation. All rights reserved.
+
+Copyright (c) 2000 BeOpen.com.
+All rights reserved.
+
+Copyright (c) 1995-2001 Corporation for National Research Initiatives.
+All rights reserved.
+
+Copyright (c) 1991-1995 Stichting Mathematisch Centrum.
+All rights reserved.
+
+
+License information
+-------------------
+
+See the file "LICENSE" for information on the history of this
+software, terms & conditions for usage, and a DISCLAIMER OF ALL
+WARRANTIES.
+
+This Python distribution contains no GNU General Public Licensed
+(GPLed) code so it may be used in proprietary projects just like prior
+Python distributions. There are interfaces to some GNU code but these
+are entirely optional.
+
+All trademarks referenced herein are property of their respective
+holders.
+
+
+What's new in this release?
+---------------------------
+
+See the file "Misc/NEWS".
+
+
+If you don't read instructions
+------------------------------
+
+Congratulations on getting this far. :-)
+
+To start building right away (on UNIX): type "./configure" in the
+current directory and when it finishes, type "make". This creates an
+executable "./python"; to install in /usr/local, first do "su root"
+and then "make install".
+
+The section `Build instructions' below is still recommended reading.
+
+
+What is Python anyway?
+----------------------
+
+Python is an interpreted, interactive object-oriented programming
+language suitable (amongst other uses) for distributed application
+development, scripting, numeric computing and system testing. Python
+is often compared to Tcl, Perl, Java, JavaScript, Visual Basic or
+Scheme. To find out more about what Python can do for you, point your
+browser to http://www.python.org/.
+
+
+How do I learn Python?
+----------------------
+
+The official tutorial is still a good place to start; see
+http://docs.python.org/ for online and downloadable versions, as well
+as a list of other introductions, and reference documentation.
+
+There's a quickly growing set of books on Python. See
+http://wiki.python.org/moin/PythonBooks for a list.
+
+
+Documentation
+-------------
+
+All documentation is provided online in a variety of formats. In
+order of importance for new users: Tutorial, Library Reference,
+Language Reference, Extending & Embedding, and the Python/C API. The
+Library Reference is especially of immense value since much of
+Python's power is described there, including the built-in data types
+and functions!
+
+All documentation is also available online at the Python web site
+(http://docs.python.org/, see below). It is available online for occasional
+reference, or can be downloaded in many formats for faster access. The
+documentation is downloadable in HTML, PostScript, PDF, LaTeX, and
+reStructuredText (2.6+) formats; the LaTeX and reStructuredText versions are
+primarily for documentation authors, translators, and people with special
+formatting requirements.
+
+If you would like to contribute to the development of Python, relevant
+documentation is available at:
+
+ http://docs.python.org/devguide/
+
+For information about building Python's documentation, refer to Doc/README.txt.
+
+
+Web sites
+---------
+
+New Python releases and related technologies are published at
+http://www.python.org/. Come visit us!
+
+
+Newsgroups and Mailing Lists
+----------------------------
+
+Read comp.lang.python, a high-volume discussion newsgroup about
+Python, or comp.lang.python.announce, a low-volume moderated newsgroup
+for Python-related announcements. These are also accessible as
+mailing lists: see http://www.python.org/community/lists/ for an
+overview of these and many other Python-related mailing lists.
+
+Archives are accessible via the Google Groups Usenet archive; see
+http://groups.google.com/. The mailing lists are also archived, see
+http://www.python.org/community/lists/ for details.
+
+
+Bug reports
+-----------
+
+To report or search for bugs, please use the Python Bug
+Tracker at http://bugs.python.org/.
+
+
+Patches and contributions
+-------------------------
+
+To submit a patch or other contribution, please use the Python Patch
+Manager at http://bugs.python.org/. Guidelines
+for patch submission may be found at http://www.python.org/dev/patches/.
+
+If you have a proposal to change Python, you may want to send an email to the
+comp.lang.python or python-ideas mailing lists for inital feedback. A Python
+Enhancement Proposal (PEP) may be submitted if your idea gains ground. All
+current PEPs, as well as guidelines for submitting a new PEP, are listed at
+http://www.python.org/dev/peps/.
+
+
+Questions
+---------
+
+For help, if you can't find it in the manuals or on the web site, it's
+best to post to the comp.lang.python or the Python mailing list (see
+above). If you specifically don't want to involve the newsgroup or
+mailing list, send questions to help@python.org (a group of volunteers
+who answer questions as they can). The newsgroup is the most
+efficient way to ask public questions.
+
+
+Build instructions
+==================
+
+Before you can build Python, you must first configure it.
+Fortunately, the configuration and build process has been automated
+for Unix and Linux installations, so all you usually have to do is
+type a few commands and sit back. There are some platforms where
+things are not quite as smooth; see the platform specific notes below.
+If you want to build for multiple platforms sharing the same source
+tree, see the section on VPATH below.
+
+Start by running the script "./configure", which determines your
+system configuration and creates the Makefile. (It takes a minute or
+two -- please be patient!) You may want to pass options to the
+configure script -- see the section below on configuration options and
+variables. When it's done, you are ready to run make.
+
+To build Python, you normally type "make" in the toplevel directory.
+If you have changed the configuration, the Makefile may have to be
+rebuilt. In this case, you may have to run make again to correctly
+build your desired target. The interpreter executable is built in the
+top level directory.
+
+Once you have built a Python interpreter, see the subsections below on
+testing and installation. If you run into trouble, see the next
+section.
+
+Previous versions of Python used a manual configuration process that
+involved editing the file Modules/Setup. While this file still exists
+and manual configuration is still supported, it is rarely needed any
+more: almost all modules are automatically built as appropriate under
+guidance of the setup.py script, which is run by Make after the
+interpreter has been built.
+
+
+Troubleshooting
+---------------
+
+See also the platform specific notes in the next section.
+
+If you run into other trouble, see the FAQ
+(http://www.python.org/doc/faq/) for hints on what can go wrong, and
+how to fix it.
+
+If you rerun the configure script with different options, remove all
+object files by running "make clean" before rebuilding. Believe it or
+not, "make clean" sometimes helps to clean up other inexplicable
+problems as well. Try it before sending in a bug report!
+
+If the configure script fails or doesn't seem to find things that
+should be there, inspect the config.log file.
+
+If you get a warning for every file about the -Olimit option being no
+longer supported, you can ignore it. There's no foolproof way to know
+whether this option is needed; all we can do is test whether it is
+accepted without error. On some systems, e.g. older SGI compilers, it
+is essential for performance (specifically when compiling ceval.c,
+which has more basic blocks than the default limit of 1000). If the
+warning bothers you, edit the Makefile to remove "-Olimit 1500" from
+the OPT variable.
+
+If you get failures in test_long, or sys.maxint gets set to -1, you
+are probably experiencing compiler bugs, usually related to
+optimization. This is a common problem with some versions of gcc, and
+some vendor-supplied compilers, which can sometimes be worked around
+by turning off optimization. Consider switching to stable versions
+(gcc 2.95.2, gcc 3.x, or contact your vendor.)
+
+From Python 2.0 onward, all Python C code is ANSI C. Compiling using
+old K&R-C-only compilers is no longer possible. ANSI C compilers are
+available for all modern systems, either in the form of updated
+compilers from the vendor, or one of the free compilers (gcc).
+
+If "make install" fails mysteriously during the "compiling the library"
+step, make sure that you don't have any of the PYTHONPATH or PYTHONHOME
+environment variables set, as they may interfere with the newly built
+executable which is compiling the library.
+
+Unsupported systems
+-------------------
+
+A number of systems are not supported in Python 2.7 anymore. Some
+support code is still present, but will be removed in later versions.
+If you still need to use current Python versions on these systems,
+please send a message to python-dev@python.org indicating that you
+volunteer to support this system. For a more detailed discussion
+regarding no-longer-supported and resupporting platforms, as well
+as a list of platforms that became or will be unsupported, see PEP 11.
+
+More specifically, the following systems are not supported any
+longer:
+- SunOS 4
+- DYNIX
+- dgux
+- Minix
+- NeXT
+- Irix 4 and --with-sgi-dl
+- Linux 1
+- Systems defining __d6_pthread_create (configure.ac)
+- Systems defining PY_PTHREAD_D4, PY_PTHREAD_D6,
+ or PY_PTHREAD_D7 in thread_pthread.h
+- Systems using --with-dl-dld
+- Systems using --without-universal-newlines
+- MacOS 9
+- Systems using --with-wctype-functions
+- Win9x, WinME
+
+
+Platform specific notes
+-----------------------
+
+(Some of these may no longer apply. If you find you can build Python
+on these platforms without the special directions mentioned here,
+submit a documentation bug report to SourceForge (see Bug Reports
+above) so we can remove them!)
+
+Unix platforms: If your vendor still ships (and you still use) Berkeley DB
+ 1.85 you will need to edit Modules/Setup to build the bsddb185
+ module and add a line to sitecustomize.py which makes it the
+ default. In Modules/Setup a line like
+
+ bsddb185 bsddbmodule.c
+
+ should work. (You may need to add -I, -L or -l flags to direct the
+ compiler and linker to your include files and libraries.)
+
+XXX I think this next bit is out of date:
+
+64-bit platforms: The modules audioop, and imageop don't work.
+ The setup.py script disables them on 64-bit installations.
+ Don't try to enable them in the Modules/Setup file. They
+ contain code that is quite wordsize sensitive. (If you have a
+ fix, let us know!)
+
+Solaris: When using Sun's C compiler with threads, at least on Solaris
+ 2.5.1, you need to add the "-mt" compiler option (the simplest
+ way is probably to specify the compiler with this option as
+ the "CC" environment variable when running the configure
+ script).
+
+ When using GCC on Solaris, beware of binutils 2.13 or GCC
+ versions built using it. This mistakenly enables the
+ -zcombreloc option which creates broken shared libraries on
+ Solaris. binutils 2.12 works, and the binutils maintainers
+ are aware of the problem. Binutils 2.13.1 only partially
+ fixed things. It appears that 2.13.2 solves the problem
+ completely. This problem is known to occur with Solaris 2.7
+ and 2.8, but may also affect earlier and later versions of the
+ OS.
+
+ When the dynamic loader complains about errors finding shared
+ libraries, such as
+
+ ld.so.1: ./python: fatal: libstdc++.so.5: open failed:
+ No such file or directory
+
+ you need to first make sure that the library is available on
+ your system. Then, you need to instruct the dynamic loader how
+ to find it. You can choose any of the following strategies:
+
+ 1. When compiling Python, set LD_RUN_PATH to the directories
+ containing missing libraries.
+ 2. When running Python, set LD_LIBRARY_PATH to these directories.
+ 3. Use crle(8) to extend the search path of the loader.
+ 4. Modify the installed GCC specs file, adding -R options into the
+ *link: section.
+
+ The complex object fails to compile on Solaris 10 with gcc 3.4 (at
+ least up to 3.4.3). To work around it, define Py_HUGE_VAL as
+ HUGE_VAL(), e.g.:
+
+ make CPPFLAGS='-D"Py_HUGE_VAL=HUGE_VAL()" -I. -I$(srcdir)/Include'
+ ./python setup.py CPPFLAGS='-D"Py_HUGE_VAL=HUGE_VAL()"'
+
+Linux: A problem with threads and fork() was tracked down to a bug in
+ the pthreads code in glibc version 2.0.5; glibc version 2.0.7
+ solves the problem. This causes the popen2 test to fail;
+ problem and solution reported by Pablo Bleyer.
+
+Red Hat Linux: Red Hat 9 built Python2.2 in UCS-4 mode and hacked
+ Tcl to support it. To compile Python2.3 with Tkinter, you will
+ need to pass --enable-unicode=ucs4 flag to ./configure.
+
+ There's an executable /usr/bin/python which is Python
+ 1.5.2 on most older Red Hat installations; several key Red Hat tools
+ require this version. Python 2.1.x may be installed as
+ /usr/bin/python2. The Makefile installs Python as
+ /usr/local/bin/python, which may or may not take precedence
+ over /usr/bin/python, depending on how you have set up $PATH.
+
+FreeBSD 3.x and probably platforms with NCurses that use libmytinfo or
+ similar: When using cursesmodule, the linking is not done in
+ the correct order with the defaults. Remove "-ltermcap" from
+ the readline entry in Setup, and use as curses entry: "curses
+ cursesmodule.c -lmytinfo -lncurses -ltermcap" - "mytinfo" (so
+ called on FreeBSD) should be the name of the auxiliary library
+ required on your platform. Normally, it would be linked
+ automatically, but not necessarily in the correct order.
+
+BSDI: BSDI versions before 4.1 have known problems with threads,
+ which can cause strange errors in a number of modules (for
+ instance, the 'test_signal' test script will hang forever.)
+ Turning off threads (with --with-threads=no) or upgrading to
+ BSDI 4.1 solves this problem.
+
+DEC Unix: Run configure with --with-dec-threads, or with
+ --with-threads=no if no threads are desired (threads are on by
+ default). When using GCC, it is possible to get an internal
+ compiler error if optimization is used. This was reported for
+ GCC 2.7.2.3 on selectmodule.c. Manually compile the affected
+ file without optimization to solve the problem.
+
+DEC Ultrix: compile with GCC to avoid bugs in the native compiler,
+ and pass SHELL=/bin/sh5 to Make when installing.
+
+AIX: A complete overhaul of the shared library support is now in
+ place. See Misc/AIX-NOTES for some notes on how it's done.
+ (The optimizer bug reported at this place in previous releases
+ has been worked around by a minimal code change.) If you get
+ errors about pthread_* functions, during compile or during
+ testing, try setting CC to a thread-safe (reentrant) compiler,
+ like "cc_r". For full C++ module support, set CC="xlC_r" (or
+ CC="xlC" without thread support).
+
+AIX 5.3: To build a 64-bit version with IBM's compiler, I used the
+ following:
+
+ export PATH=/usr/bin:/usr/vacpp/bin
+ ./configure --with-gcc="xlc_r -q64" --with-cxx="xlC_r -q64" \
+ --disable-ipv6 AR="ar -X64"
+ make
+
+HP-UX: When using threading, you may have to add -D_REENTRANT to the
+ OPT variable in the top-level Makefile; reported by Pat Knight,
+ this seems to make a difference (at least for HP-UX 10.20)
+ even though pyconfig.h defines it. This seems unnecessary when
+ using HP/UX 11 and later - threading seems to work "out of the
+ box".
+
+HP-UX ia64: When building on the ia64 (Itanium) platform using HP's
+ compiler, some experience has shown that the compiler's
+ optimiser produces a completely broken version of python
+ (see http://bugs.python.org/814976). To work around this,
+ edit the Makefile and remove -O from the OPT line.
+
+ To build a 64-bit executable on an Itanium 2 system using HP's
+ compiler, use these environment variables:
+
+ CC=cc
+ CXX=aCC
+ BASECFLAGS="+DD64"
+ LDFLAGS="+DD64 -lxnet"
+
+ and call configure as:
+
+ ./configure --without-gcc
+
+ then *unset* the environment variables again before running
+ make. (At least one of these flags causes the build to fail
+ if it remains set.) You still have to edit the Makefile and
+ remove -O from the OPT line.
+
+HP PA-RISC 2.0: A recent bug report (http://bugs.python.org/546117)
+ suggests that the C compiler in this 64-bit system has bugs
+ in the optimizer that break Python. Compiling without
+ optimization solves the problems.
+
+SCO: The following apply to SCO 3 only; Python builds out of the box
+ on SCO 5 (or so we've heard).
+
+ 1) Everything works much better if you add -U__STDC__ to the
+ defs. This is because all the SCO header files are broken.
+ Anything that isn't mentioned in the C standard is
+ conditionally excluded when __STDC__ is defined.
+
+ 2) Due to the U.S. export restrictions, SCO broke the crypt
+ stuff out into a separate library, libcrypt_i.a so the LIBS
+ needed be set to:
+
+ LIBS=' -lsocket -lcrypt_i'
+
+UnixWare: There are known bugs in the math library of the system, as well as
+ problems in the handling of threads (calling fork in one
+ thread may interrupt system calls in others). Therefore, test_math and
+ tests involving threads will fail until those problems are fixed.
+
+QNX: Chris Herborth (chrish@qnx.com) writes:
+ configure works best if you use GNU bash; a port is available on
+ ftp.qnx.com in /usr/free. I used the following process to build,
+ test and install Python 1.5.x under QNX:
+
+ 1) CONFIG_SHELL=/usr/local/bin/bash CC=cc RANLIB=: \
+ ./configure --verbose --without-gcc --with-libm=""
+
+ 2) edit Modules/Setup to activate everything that makes sense for
+ your system... tested here at QNX with the following modules:
+
+ array, audioop, binascii, cPickle, cStringIO, cmath,
+ crypt, curses, errno, fcntl, gdbm, grp, imageop,
+ _locale, math, md5, new, operator, parser, pcre,
+ posix, pwd, readline, regex, reop,
+ select, signal, socket, soundex, strop, struct,
+ syslog, termios, time, timing, zlib, audioop, imageop
+
+ 3) make SHELL=/usr/local/bin/bash
+
+ or, if you feel the need for speed:
+
+ make SHELL=/usr/local/bin/bash OPT="-5 -Oil+nrt"
+
+ 4) make SHELL=/usr/local/bin/bash test
+
+ Using GNU readline 2.2 seems to behave strangely, but I
+ think that's a problem with my readline 2.2 port. :-\
+
+ 5) make SHELL=/usr/local/bin/bash install
+
+ If you get SIGSEGVs while running Python (I haven't yet, but
+ I've only run small programs and the test cases), you're
+ probably running out of stack; the default 32k could be a
+ little tight. To increase the stack size, edit the Makefile
+ to read: LDFLAGS = -N 48k
+
+BeOS: See Misc/BeOS-NOTES for notes about compiling/installing
+ Python on BeOS R3 or later. Note that only the PowerPC
+ platform is supported for R3; both PowerPC and x86 are
+ supported for R4.
+
+Cray T3E: Mark Hadfield (m.hadfield@niwa.co.nz) writes:
+ Python can be built satisfactorily on a Cray T3E but based on
+ my experience with the NIWA T3E (2002-05-22, version 2.2.1)
+ there are a few bugs and gotchas. For more information see a
+ thread on comp.lang.python in May 2002 entitled "Building
+ Python on Cray T3E".
+
+ 1) Use Cray's cc and not gcc. The latter was reported not to
+ work by Konrad Hinsen. It may work now, but it may not.
+
+ 2) To set sys.platform to something sensible, pass the
+ following environment variable to the configure script:
+
+ MACHDEP=unicosmk
+
+ 2) Run configure with option "--enable-unicode=ucs4".
+
+ 3) The Cray T3E does not support dynamic linking, so extension
+ modules have to be built by adding (or uncommenting) lines
+ in Modules/Setup. The minimum set of modules is
+
+ posix, new, _sre, unicodedata
+
+ On NIWA's vanilla T3E system the following have also been
+ included successfully:
+
+ _codecs, _locale, _socket, _symtable, _testcapi, _weakref
+ array, binascii, cmath, cPickle, crypt, cStringIO, dbm
+ errno, fcntl, grp, math, md5, operator, parser, pcre, pwd
+ regex, rotor, select, struct, strop, syslog, termios
+ time, timing, xreadlines
+
+ 4) Once the python executable and library have been built, make
+ will execute setup.py, which will attempt to build remaining
+ extensions and link them dynamically. Each of these attempts
+ will fail but should not halt the make process. This is
+ normal.
+
+ 5) Running "make test" uses a lot of resources and causes
+ problems on our system. You might want to try running tests
+ singly or in small groups.
+
+SGI: SGI's standard "make" utility (/bin/make or /usr/bin/make)
+ does not check whether a command actually changed the file it
+ is supposed to build. This means that whenever you say "make"
+ it will redo the link step. The remedy is to use SGI's much
+ smarter "smake" utility (/usr/sbin/smake), or GNU make. If
+ you set the first line of the Makefile to #!/usr/sbin/smake
+ smake will be invoked by make (likewise for GNU make).
+
+ WARNING: There are bugs in the optimizer of some versions of
+ SGI's compilers that can cause bus errors or other strange
+ behavior, especially on numerical operations. To avoid this,
+ try building with "make OPT=".
+
+OS/2: If you are running Warp3 or Warp4 and have IBM's VisualAge C/C++
+ compiler installed, just change into the pc\os2vacpp directory
+ and type NMAKE. Threading and sockets are supported by default
+ in the resulting binaries of PYTHON15.DLL and PYTHON.EXE.
+
+Reliant UNIX: The thread support does not compile on Reliant UNIX, and
+ there is a (minor) problem in the configure script for that
+ platform as well. This should be resolved in time for a
+ future release.
+
+MacOSX: The tests will crash on both 10.1 and 10.2 with SEGV in
+ test_re and test_sre due to the small default stack size. If
+ you set the stack size to 2048 before doing a "make test" the
+ failure can be avoided. If you're using the tcsh or csh shells,
+ use "limit stacksize 2048" and for the bash shell (the default
+ as of OSX 10.3), use "ulimit -s 2048".
+
+ On naked Darwin you may want to add the configure option
+ "--disable-toolbox-glue" to disable the glue code for the Carbon
+ interface modules. The modules themselves are currently only built
+ if you add the --enable-framework option, see below.
+
+ On a clean OSX /usr/local does not exist. Do a
+ "sudo mkdir -m 775 /usr/local"
+ before you do a make install. It is probably not a good idea to
+ do "sudo make install" which installs everything as superuser,
+ as this may later cause problems when installing distutils-based
+ additions.
+
+ Some people have reported problems building Python after using "fink"
+ to install additional unix software. Disabling fink (remove all
+ references to /sw from your .profile or .login) should solve this.
+
+ You may want to try the configure option "--enable-framework"
+ which installs Python as a framework. The location can be set
+ as argument to the --enable-framework option (default
+ /Library/Frameworks). A framework install is probably needed if you
+ want to use any Aqua-based GUI toolkit (whether Tkinter, wxPython,
+ Carbon, Cocoa or anything else).
+
+ You may also want to try the configure option "--enable-universalsdk"
+ which builds Python as a universal binary with support for the
+ i386 and PPC architetures. This requires Xcode 2.1 or later to build.
+
+ See Mac/README for more information on framework and
+ universal builds.
+
+Cygwin: With recent (relative to the time of writing, 2001-12-19)
+ Cygwin installations, there are problems with the interaction
+ of dynamic linking and fork(). This manifests itself in build
+ failures during the execution of setup.py.
+
+ There are two workarounds that both enable Python (albeit
+ without threading support) to build and pass all tests on
+ NT/2000 (and most likely XP as well, though reports of testing
+ on XP would be appreciated).
+
+ The workarounds:
+
+ (a) the band-aid fix is to link the _socket module statically
+ rather than dynamically (which is the default).
+
+ To do this, run "./configure --with-threads=no" including any
+ other options you need (--prefix, etc.). Then in Modules/Setup
+ uncomment the lines:
+
+ #SSL=/usr/local/ssl
+ #_socket socketmodule.c \
+ # -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
+ # -L$(SSL)/lib -lssl -lcrypto
+
+ and remove "local/" from the SSL variable. Finally, just run
+ "make"!
+
+ (b) The "proper" fix is to rebase the Cygwin DLLs to prevent
+ base address conflicts. Details on how to do this can be
+ found in the following mail:
+
+ http://sources.redhat.com/ml/cygwin/2001-12/msg00894.html
+
+ It is hoped that a version of this solution will be
+ incorporated into the Cygwin distribution fairly soon.
+
+ Two additional problems:
+
+ (1) Threading support should still be disabled due to a known
+ bug in Cygwin pthreads that causes test_threadedtempfile to
+ hang.
+
+ (2) The _curses module does not build. This is a known
+ Cygwin ncurses problem that should be resolved the next time
+ that this package is released.
+
+ On older versions of Cygwin, test_poll may hang and test_strftime
+ may fail.
+
+ The situation on 9X/Me is not accurately known at present.
+ Some time ago, there were reports that the following
+ regression tests failed:
+
+ test_pwd
+ test_select (hang)
+ test_socket
+
+ Due to the test_select hang on 9X/Me, one should run the
+ regression test using the following:
+
+ make TESTOPTS='-l -x test_select' test
+
+ News regarding these platforms with more recent Cygwin
+ versions would be appreciated!
+
+Windows: When executing Python scripts on the command line using file type
+ associations (i.e. starting "script.py" instead of "python script.py"),
+ redirects may not work unless you set a specific registry key. See
+ the Knowledge Base article <http://support.microsoft.com/kb/321788>.
+
+
+Configuring the bsddb and dbm modules
+-------------------------------------
+
+Beginning with Python version 2.3, the PyBsddb package
+<http://pybsddb.sf.net/> was adopted into Python as the bsddb package,
+exposing a set of package-level functions which provide
+backwards-compatible behavior. Only versions 3.3 through 4.4 of
+Sleepycat's libraries provide the necessary API, so older versions
+aren't supported through this interface. The old bsddb module has
+been retained as bsddb185, though it is not built by default. Users
+wishing to use it will have to tweak Modules/Setup to build it. The
+dbm module will still be built against the Sleepycat libraries if
+other preferred alternatives (ndbm, gdbm) are not found.
+
+Building the sqlite3 module
+---------------------------
+
+To build the sqlite3 module, you'll need the sqlite3 or libsqlite3
+packages installed, including the header files. Many modern operating
+systems distribute the headers in a separate package to the library -
+often it will be the same name as the main package, but with a -dev or
+-devel suffix.
+
+The version of pysqlite2 that's including in Python needs sqlite3 3.0.8
+or later. setup.py attempts to check that it can find a correct version.
+
+Configuring threads
+-------------------
+
+As of Python 2.0, threads are enabled by default. If you wish to
+compile without threads, or if your thread support is broken, pass the
+--with-threads=no switch to configure. Unfortunately, on some
+platforms, additional compiler and/or linker options are required for
+threads to work properly. Below is a table of those options,
+collected by Bill Janssen. We would love to automate this process
+more, but the information below is not enough to write a patch for the
+configure.ac file, so manual intervention is required. If you patch
+the configure.ac file and are confident that the patch works, please
+send in the patch. (Don't bother patching the configure script itself
+-- it is regenerated each time the configure.ac file changes.)
+
+Compiler switches for threads
+.............................
+
+The definition of _REENTRANT should be configured automatically, if
+that does not work on your system, or if _REENTRANT is defined
+incorrectly, please report that as a bug.
+
+ OS/Compiler/threads Switches for use with threads
+ (POSIX is draft 10, DCE is draft 4) compile & link
+
+ SunOS 5.{1-5}/{gcc,SunPro cc}/solaris -mt
+ SunOS 5.5/{gcc,SunPro cc}/POSIX (nothing)
+ DEC OSF/1 3.x/cc/DCE -threads
+ (butenhof@zko.dec.com)
+ Digital UNIX 4.x/cc/DCE -threads
+ (butenhof@zko.dec.com)
+ Digital UNIX 4.x/cc/POSIX -pthread
+ (butenhof@zko.dec.com)
+ AIX 4.1.4/cc_r/d7 (nothing)
+ (buhrt@iquest.net)
+ AIX 4.1.4/cc_r4/DCE (nothing)
+ (buhrt@iquest.net)
+ IRIX 6.2/cc/POSIX (nothing)
+ (robertl@cwi.nl)
+
+
+Linker (ld) libraries and flags for threads
+...........................................
+
+ OS/threads Libraries/switches for use with threads
+
+ SunOS 5.{1-5}/solaris -lthread
+ SunOS 5.5/POSIX -lpthread
+ DEC OSF/1 3.x/DCE -lpthreads -lmach -lc_r -lc
+ (butenhof@zko.dec.com)
+ Digital UNIX 4.x/DCE -lpthreads -lpthread -lmach -lexc -lc
+ (butenhof@zko.dec.com)
+ Digital UNIX 4.x/POSIX -lpthread -lmach -lexc -lc
+ (butenhof@zko.dec.com)
+ AIX 4.1.4/{draft7,DCE} (nothing)
+ (buhrt@iquest.net)
+ IRIX 6.2/POSIX -lpthread
+ (jph@emilia.engr.sgi.com)
+
+
+Building a shared libpython
+---------------------------
+
+Starting with Python 2.3, the majority of the interpreter can be built
+into a shared library, which can then be used by the interpreter
+executable, and by applications embedding Python. To enable this feature,
+configure with --enable-shared.
+
+If you enable this feature, the same object files will be used to create
+a static library. In particular, the static library will contain object
+files using position-independent code (PIC) on platforms where PIC flags
+are needed for the shared library.
+
+
+Configuring additional built-in modules
+---------------------------------------
+
+Starting with Python 2.1, the setup.py script at the top of the source
+distribution attempts to detect which modules can be built and
+automatically compiles them. Autodetection doesn't always work, so
+you can still customize the configuration by editing the Modules/Setup
+file; but this should be considered a last resort. The rest of this
+section only applies if you decide to edit the Modules/Setup file.
+You also need this to enable static linking of certain modules (which
+is needed to enable profiling on some systems).
+
+This file is initially copied from Setup.dist by the configure script;
+if it does not exist yet, create it by copying Modules/Setup.dist
+yourself (configure will never overwrite it). Never edit Setup.dist
+-- always edit Setup or Setup.local (see below). Read the comments in
+the file for information on what kind of edits are allowed. When you
+have edited Setup in the Modules directory, the interpreter will
+automatically be rebuilt the next time you run make (in the toplevel
+directory).
+
+Many useful modules can be built on any Unix system, but some optional
+modules can't be reliably autodetected. Often the quickest way to
+determine whether a particular module works or not is to see if it
+will build: enable it in Setup, then if you get compilation or link
+errors, disable it -- you're either missing support or need to adjust
+the compilation and linking parameters for that module.
+
+On SGI IRIX, there are modules that interface to many SGI specific
+system libraries, e.g. the GL library and the audio hardware. These
+modules will not be built by the setup.py script.
+
+In addition to the file Setup, you can also edit the file Setup.local.
+(the makesetup script processes both). You may find it more
+convenient to edit Setup.local and leave Setup alone. Then, when
+installing a new Python version, you can copy your old Setup.local
+file.
+
+
+Setting the optimization/debugging options
+------------------------------------------
+
+If you want or need to change the optimization/debugging options for
+the C compiler, assign to the OPT variable on the toplevel make
+command; e.g. "make OPT=-g" will build a debugging version of Python
+on most platforms. The default is OPT=-O; a value for OPT in the
+environment when the configure script is run overrides this default
+(likewise for CC; and the initial value for LIBS is used as the base
+set of libraries to link with).
+
+When compiling with GCC, the default value of OPT will also include
+the -Wall and -Wstrict-prototypes options.
+
+Additional debugging code to help debug memory management problems can
+be enabled by using the --with-pydebug option to the configure script.
+
+For flags that change binary compatibility, use the EXTRA_CFLAGS
+variable.
+
+
+Profiling
+---------
+
+If you want C profiling turned on, the easiest way is to run configure
+with the CC environment variable to the necessary compiler
+invocation. For example, on Linux, this works for profiling using
+gprof(1):
+
+ CC="gcc -pg" ./configure
+
+Note that on Linux, gprof apparently does not work for shared
+libraries. The Makefile/Setup mechanism can be used to compile and
+link most extension modules statically.
+
+
+Coverage checking
+-----------------
+
+For C coverage checking using gcov, run "make coverage". This will
+build a Python binary with profiling activated, and a ".gcno" and
+".gcda" file for every source file compiled with that option. With
+the built binary, now run the code whose coverage you want to check.
+Then, you can see coverage statistics for each individual source file
+by running gcov, e.g.
+
+ gcov -o Modules zlibmodule
+
+This will create a "zlibmodule.c.gcov" file in the current directory
+containing coverage info for that source file.
+
+This works only for source files statically compiled into the
+executable; use the Makefile/Setup mechanism to compile and link
+extension modules you want to coverage-check statically.
+
+
+Testing
+-------
+
+To test the interpreter, type "make test" in the top-level directory.
+This runs the test set twice (once with no compiled files, once with
+the compiled files left by the previous test run). The test set
+produces some output. You can generally ignore the messages about
+skipped tests due to optional features which can't be imported.
+If a message is printed about a failed test or a traceback or core
+dump is produced, something is wrong. On some Linux systems (those
+that are not yet using glibc 6), test_strftime fails due to a
+non-standard implementation of strftime() in the C library. Please
+ignore this, or upgrade to glibc version 6.
+
+By default, tests are prevented from overusing resources like disk space and
+memory. To enable these tests, run "make testall".
+
+IMPORTANT: If the tests fail and you decide to mail a bug report,
+*don't* include the output of "make test". It is useless. Run the
+failing test manually, as follows:
+
+ ./python Lib/test/regrtest.py -v test_whatever
+
+(substituting the top of the source tree for '.' if you built in a
+different directory). This runs the test in verbose mode.
+
+
+Installing
+----------
+
+To install the Python binary, library modules, shared library modules
+(see below), include files, configuration files, and the manual page,
+just type
+
+ make install
+
+This will install all platform-independent files in subdirectories of
+the directory given with the --prefix option to configure or to the
+`prefix' Make variable (default /usr/local). All binary and other
+platform-specific files will be installed in subdirectories if the
+directory given by --exec-prefix or the `exec_prefix' Make variable
+(defaults to the --prefix directory) is given.
+
+If DESTDIR is set, it will be taken as the root directory of the
+installation, and files will be installed into $(DESTDIR)$(prefix),
+$(DESTDIR)$(exec_prefix), etc.
+
+All subdirectories created will have Python's version number in their
+name, e.g. the library modules are installed in
+"/usr/local/lib/python<version>/" by default, where <version> is the
+<major>.<minor> release number (e.g. "2.1"). The Python binary is
+installed as "python<version>" and a hard link named "python" is
+created. The only file not installed with a version number in its
+name is the manual page, installed as "/usr/local/man/man1/python.1"
+by default.
+
+If you want to install multiple versions of Python see the section below
+entitled "Installing multiple versions".
+
+The only thing you may have to install manually is the Python mode for
+Emacs found in Misc/python-mode.el. (But then again, more recent
+versions of Emacs may already have it.) Follow the instructions that
+came with Emacs for installation of site-specific files.
+
+On Mac OS X, if you have configured Python with --enable-framework, you
+should use "make frameworkinstall" to do the installation. Note that this
+installs the Python executable in a place that is not normally on your
+PATH, you may want to set up a symlink in /usr/local/bin.
+
+
+Installing multiple versions
+----------------------------
+
+On Unix and Mac systems if you intend to install multiple versions of Python
+using the same installation prefix (--prefix argument to the configure
+script) you must take care that your primary python executable is not
+overwritten by the installation of a different version. All files and
+directories installed using "make altinstall" contain the major and minor
+version and can thus live side-by-side. "make install" also creates
+${prefix}/bin/python which refers to ${prefix}/bin/pythonX.Y. If you intend
+to install multiple versions using the same prefix you must decide which
+version (if any) is your "primary" version. Install that version using
+"make install". Install all other versions using "make altinstall".
+
+For example, if you want to install Python 2.5, 2.6 and 3.0 with 2.6 being
+the primary version, you would execute "make install" in your 2.6 build
+directory and "make altinstall" in the others.
+
+
+Configuration options and variables
+-----------------------------------
+
+Some special cases are handled by passing options to the configure
+script.
+
+WARNING: if you rerun the configure script with different options, you
+must run "make clean" before rebuilding. Exceptions to this rule:
+after changing --prefix or --exec-prefix, all you need to do is remove
+Modules/getpath.o.
+
+--with(out)-gcc: The configure script uses gcc (the GNU C compiler) if
+ it finds it. If you don't want this, or if this compiler is
+ installed but broken on your platform, pass the option
+ --without-gcc. You can also pass "CC=cc" (or whatever the
+ name of the proper C compiler is) in the environment, but the
+ advantage of using --without-gcc is that this option is
+ remembered by the config.status script for its --recheck
+ option.
+
+--prefix, --exec-prefix: If you want to install the binaries and the
+ Python library somewhere else than in /usr/local/{bin,lib},
+ you can pass the option --prefix=DIRECTORY; the interpreter
+ binary will be installed as DIRECTORY/bin/python and the
+ library files as DIRECTORY/lib/python/*. If you pass
+ --exec-prefix=DIRECTORY (as well) this overrides the
+ installation prefix for architecture-dependent files (like the
+ interpreter binary). Note that --prefix=DIRECTORY also
+ affects the default module search path (sys.path), when
+ Modules/config.c is compiled. Passing make the option
+ prefix=DIRECTORY (and/or exec_prefix=DIRECTORY) overrides the
+ prefix set at configuration time; this may be more convenient
+ than re-running the configure script if you change your mind
+ about the install prefix.
+
+--with-readline: This option is no longer supported. GNU
+ readline is automatically enabled by setup.py when present.
+
+--with-threads: On most Unix systems, you can now use multiple
+ threads, and support for this is enabled by default. To
+ disable this, pass --with-threads=no. If the library required
+ for threads lives in a peculiar place, you can use
+ --with-thread=DIRECTORY. IMPORTANT: run "make clean" after
+ changing (either enabling or disabling) this option, or you
+ will get link errors! Note: for DEC Unix use
+ --with-dec-threads instead.
+
+--with-sgi-dl: On SGI IRIX 4, dynamic loading of extension modules is
+ supported by the "dl" library by Jack Jansen, which is
+ ftp'able from ftp://ftp.cwi.nl/pub/dynload/dl-1.6.tar.Z.
+ This is enabled (after you've ftp'ed and compiled the dl
+ library) by passing --with-sgi-dl=DIRECTORY where DIRECTORY
+ is the absolute pathname of the dl library. (Don't bother on
+ IRIX 5, it already has dynamic linking using SunOS style
+ shared libraries.) THIS OPTION IS UNSUPPORTED.
+
+--with-dl-dld: Dynamic loading of modules is rumored to be supported
+ on some other systems: VAX (Ultrix), Sun3 (SunOS 3.4), Sequent
+ Symmetry (Dynix), and Atari ST. This is done using a
+ combination of the GNU dynamic loading package
+ (ftp://ftp.cwi.nl/pub/dynload/dl-dld-1.1.tar.Z) and an
+ emulation of the SGI dl library mentioned above (the emulation
+ can be found at
+ ftp://ftp.cwi.nl/pub/dynload/dld-3.2.3.tar.Z). To
+ enable this, ftp and compile both libraries, then call
+ configure, passing it the option
+ --with-dl-dld=DL_DIRECTORY,DLD_DIRECTORY where DL_DIRECTORY is
+ the absolute pathname of the dl emulation library and
+ DLD_DIRECTORY is the absolute pathname of the GNU dld library.
+ (Don't bother on SunOS 4 or 5, they already have dynamic
+ linking using shared libraries.) THIS OPTION IS UNSUPPORTED.
+
+--with-libm, --with-libc: It is possible to specify alternative
+ versions for the Math library (default -lm) and the C library
+ (default the empty string) using the options
+ --with-libm=STRING and --with-libc=STRING, respectively. For
+ example, if your system requires that you pass -lc_s to the C
+ compiler to use the shared C library, you can pass
+ --with-libc=-lc_s. These libraries are passed after all other
+ libraries, the C library last.
+
+--with-libs='libs': Add 'libs' to the LIBS that the python interpreter
+ is linked against.
+
+--with-cxx-main=<compiler>: If you plan to use C++ extension modules,
+ then -- on some platforms -- you need to compile python's main()
+ function with the C++ compiler. With this option, make will use
+ <compiler> to compile main() *and* to link the python executable.
+ It is likely that the resulting executable depends on the C++
+ runtime library of <compiler>. (The default is --without-cxx-main.)
+
+ There are platforms that do not require you to build Python
+ with a C++ compiler in order to use C++ extension modules.
+ E.g., x86 Linux with ELF shared binaries and GCC 3.x, 4.x is such
+ a platform. We recommend that you configure Python
+ --without-cxx-main on those platforms because a mismatch
+ between the C++ compiler version used to build Python and to
+ build a C++ extension module is likely to cause a crash at
+ runtime.
+
+ The Python installation also stores the variable CXX that
+ determines, e.g., the C++ compiler distutils calls by default
+ to build C++ extensions. If you set CXX on the configure command
+ line to any string of non-zero length, then configure won't
+ change CXX. If you do not preset CXX but pass
+ --with-cxx-main=<compiler>, then configure sets CXX=<compiler>.
+ In all other cases, configure looks for a C++ compiler by
+ some common names (c++, g++, gcc, CC, cxx, cc++, cl) and sets
+ CXX to the first compiler it finds. If it does not find any
+ C++ compiler, then it sets CXX="".
+
+ Similarly, if you want to change the command used to link the
+ python executable, then set LINKCC on the configure command line.
+
+
+--with-pydebug: Enable additional debugging code to help track down
+ memory management problems. This allows printing a list of all
+ live objects when the interpreter terminates.
+
+--with(out)-universal-newlines: enable reading of text files with
+ foreign newline convention (default: enabled). In other words,
+ any of \r, \n or \r\n is acceptable as end-of-line character.
+ If enabled import and execfile will automatically accept any newline
+ in files. Python code can open a file with open(file, 'U') to
+ read it in universal newline mode. THIS OPTION IS UNSUPPORTED.
+
+--with-tsc: Profile using the Pentium timestamping counter (TSC).
+
+--with-system-ffi: Build the _ctypes extension module using an ffi
+ library installed on the system.
+
+--with-dbmliborder=db1:db2:...: Specify the order that backends for the
+ dbm extension are checked. Valid value is a colon separated string
+ with the backend names `ndbm', `gdbm' and `bdb'.
+
+Building for multiple architectures (using the VPATH feature)
+-------------------------------------------------------------
+
+If your file system is shared between multiple architectures, it
+usually is not necessary to make copies of the sources for each
+architecture you want to support. If the make program supports the
+VPATH feature, you can create an empty build directory for each
+architecture, and in each directory run the configure script (on the
+appropriate machine with the appropriate options). This creates the
+necessary subdirectories and the Makefiles therein. The Makefiles
+contain a line VPATH=... which points to a directory containing the
+actual sources. (On SGI systems, use "smake -J1" instead of "make" if
+you use VPATH -- don't try gnumake.)
+
+For example, the following is all you need to build a minimal Python
+in /usr/tmp/python (assuming ~guido/src/python is the toplevel
+directory and you want to build in /usr/tmp/python):
+
+ $ mkdir /usr/tmp/python
+ $ cd /usr/tmp/python
+ $ ~guido/src/python/configure
+ [...]
+ $ make
+ [...]
+ $
+
+Note that configure copies the original Setup file to the build
+directory if it finds no Setup file there. This means that you can
+edit the Setup file for each architecture independently. For this
+reason, subsequent changes to the original Setup file are not tracked
+automatically, as they might overwrite local changes. To force a copy
+of a changed original Setup file, delete the target Setup file. (The
+makesetup script supports multiple input files, so if you want to be
+fancy you can change the rules to create an empty Setup.local if it
+doesn't exist and run it with arguments $(srcdir)/Setup Setup.local;
+however this assumes that you only need to add modules.)
+
+Also note that you can't use a workspace for VPATH and non VPATH builds. The
+object files left behind by one version confuses the other.
+
+
+Building on non-UNIX systems
+----------------------------
+
+For Windows (2000/NT/ME/98/95), assuming you have MS VC++ 7.1, the
+project files are in PCbuild, the workspace is pcbuild.dsw. See
+PCbuild\readme.txt for detailed instructions.
+
+For other non-Unix Windows compilers, in particular MS VC++ 6.0 and
+for OS/2, enter the directory "PC" and read the file "readme.txt".
+
+For the Mac, a separate source distribution will be made available,
+for use with the CodeWarrior compiler. If you are interested in Mac
+development, join the PythonMac Special Interest Group
+(http://www.python.org/sigs/pythonmac-sig/, or send email to
+pythonmac-sig-request@python.org).
+
+Of course, there are also binary distributions available for these
+platforms -- see http://www.python.org/.
+
+To port Python to a new non-UNIX system, you will have to fake the
+effect of running the configure script manually (for Mac and PC, this
+has already been done for you). A good start is to copy the file
+pyconfig.h.in to pyconfig.h and edit the latter to reflect the actual
+configuration of your system. Most symbols must simply be defined as
+1 only if the corresponding feature is present and can be left alone
+otherwise; however the *_t type symbols must be defined as some
+variant of int if they need to be defined at all.
+
+For all platforms, it's important that the build arrange to define the
+preprocessor symbol NDEBUG on the compiler command line in a release
+build of Python (else assert() calls remain in the code, hurting
+release-build performance). The Unix, Windows and Mac builds already
+do this.
+
+
+Miscellaneous issues
+====================
+
+Emacs mode
+----------
+
+There's an excellent Emacs editing mode for Python code; see the file
+Misc/python-mode.el. Originally written by the famous Tim Peters, it is now
+maintained by the equally famous Barry Warsaw. The latest version, along with
+various other contributed Python-related Emacs goodies, is online at
+http://launchpad.net/python-mode/.
+
+
+Tkinter
+-------
+
+The setup.py script automatically configures this when it detects a
+usable Tcl/Tk installation. This requires Tcl/Tk version 8.0 or
+higher.
+
+For more Tkinter information, see the Tkinter Resource page:
+http://www.python.org/topics/tkinter/
+
+There are demos in the Demo/tkinter directory.
+
+Note that there's a Python module called "Tkinter" (capital T) which
+lives in Lib/lib-tk/Tkinter.py, and a C module called "_tkinter"
+(lower case t and leading underscore) which lives in
+Modules/_tkinter.c. Demos and normal Tk applications import only the
+Python Tkinter module -- only the latter imports the C _tkinter
+module. In order to find the C _tkinter module, it must be compiled
+and linked into the Python interpreter -- the setup.py script does
+this. In order to find the Python Tkinter module, sys.path must be
+set correctly -- normal installation takes care of this.
+
+
+Distribution structure
+----------------------
+
+Most subdirectories have their own README files. Most files have
+comments.
+
+Demo/ Demonstration scripts, modules and programs
+Doc/ Documentation sources (reStructuredText)
+Grammar/ Input for the parser generator
+Include/ Public header files
+LICENSE Licensing information
+Lib/ Python library modules
+Mac/ Macintosh specific resources
+Makefile.pre.in Source from which config.status creates the Makefile.pre
+Misc/ Miscellaneous useful files
+Modules/ Implementation of most built-in modules
+Objects/ Implementation of most built-in object types
+PC/ Files specific to PC ports (DOS, Windows, OS/2)
+PCbuild/ Build directory for Microsoft Visual C++
+Parser/ The parser and tokenizer and their input handling
+Python/ The byte-compiler and interpreter
+README The file you're reading now
+RISCOS/ Files specific to RISC OS port
+Tools/ Some useful programs written in Python
+pyconfig.h.in Source from which pyconfig.h is created (GNU autoheader output)
+configure Configuration shell script (GNU autoconf output)
+configure.ac Configuration specification (input for GNU autoconf)
+install-sh Shell script used to install files
+setup.py Python script used to build extension modules
+
+The following files will (may) be created in the toplevel directory by
+the configuration and build processes:
+
+Makefile Build rules
+Makefile.pre Build rules before running Modules/makesetup
+buildno Keeps track of the build number
+config.cache Cache of configuration variables
+pyconfig.h Configuration header
+config.log Log from last configure run
+config.status Status from last run of the configure script
+getbuildinfo.o Object file from Modules/getbuildinfo.c
+libpython<version>.a The library archive
+python The executable interpreter
+reflog.txt Output from running the regression suite with the -R flag
+tags, TAGS Tags files for vi and Emacs
+
+
+That's all, folks!
+------------------
+
+
+--Guido van Rossum (home page: http://www.python.org/~guido/)