1 files changed, 0 insertions, 164 deletions
diff --git a/ArmPlatformPkg/ArmRealViewEbPkg/Pei/Sec.c b/ArmPlatformPkg/ArmRealViewEbPkg/Pei/Sec.c
deleted file mode 100644
index cb5eb0a7b1..0000000000
--- a/ArmPlatformPkg/ArmRealViewEbPkg/Pei/Sec.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/** @file
-  C Entry point for the SEC. First C code after the reset vector.
-
-  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-  
-  This program and the accompanying materials
-  are licensed and made available under the terms and conditions of the BSD License
-  which accompanies this distribution.  The full text of the license may be found at
-  http://opensource.org/licenses/bsd-license.php
-
-  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include <PiPei.h>
-
-#include <Library/DebugLib.h>
-#include <Library/PrePiLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/ArmLib.h>
-#include <Library/PeCoffGetEntryPointLib.h>
-#include <Library/DebugAgentLib.h>
-
-#include <Ppi/GuidedSectionExtraction.h>
-#include <Guid/LzmaDecompress.h>
-
-#include <ArmEb/ArmEb.h>
-
-#include "LzmaDecompress.h"
-
-VOID
-EFIAPI 
-_ModuleEntryPoint(
-  VOID
-  );
-
-CHAR8 *
-DeCygwinPathIfNeeded (
-  IN  CHAR8   *Name
-  );
-
-RETURN_STATUS
-EFIAPI
-SerialPortInitialize (
-  VOID
-  );
-  
-  
-VOID
-UartInit (
-  VOID
-  )
-{
-  // SEC phase needs to run library constructors by hand.
-  // This assumes we are linked agains the SerialLib
-  // In non SEC modules the init call is in autogenerated code.
-  SerialPortInitialize ();
-}
-
-VOID
-TimerInit (
-  VOID
-  )
-{
-  // configure SP810 to use 1MHz clock and disable
-  MmioAndThenOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
-  // Enable
-  MmioOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER2_EN);
-
-  // configure timer 2 for one shot operation, 32 bits, no prescaler, and interrupt disabled
-  MmioOr32 (EB_SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ONESHOT | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
-
-  // preload the timer count register
-  MmioWrite32 (EB_SP804_TIMER2_BASE + SP804_TIMER_LOAD_REG, 1);
-
-  // enable the timer
-  MmioOr32 (EB_SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
-}
-
-
-VOID
-InitCache (
-  IN  UINT32  MemoryBase,
-  IN  UINT32  MemoryLength
-  );
-
-EFI_STATUS
-EFIAPI
-ExtractGuidedSectionLibConstructor (
-  VOID
-  );
-
-EFI_STATUS
-EFIAPI
-LzmaDecompressLibConstructor (
-  VOID
-  );
-
-
-VOID
-CEntryPoint (
-  IN  VOID  *MemoryBase,
-  IN  UINTN MemorySize,
-  IN  VOID  *StackBase,
-  IN  UINTN StackSize
-  )
-{
-  VOID *HobBase;
-
-  // HOB list is at bottom of stack area
-  // Stack grows from top-to-bottom towards HOB list
-  HobBase      = (VOID *)StackBase;
-  CreateHobList (MemoryBase, MemorySize, HobBase, StackBase);
-
-  // Turn off remapping NOR to 0. We can will now see DRAM in low memory
-  MmioOr32 (0x10001000 ,BIT8); //EB_SP810_CTRL_BASE
-
-  // Enable program flow prediction, if supported.
-  ArmEnableBranchPrediction ();
-
-  // Initialize CPU cache
-  InitCache ((UINT32)MemoryBase, (UINT32)MemorySize);
-
-  // Add memory allocation hob for relocated FD
-  BuildMemoryAllocationHob (FixedPcdGet32(PcdEmbeddedFdBaseAddress), FixedPcdGet32(PcdEmbeddedFdSize), EfiBootServicesData);
-
-  // Add the FVs to the hob list
-  BuildFvHob (PcdGet32(PcdFlashFvMainBase), PcdGet32(PcdFlashFvMainSize));
-
-  // Start talking
-  UartInit ();
-
-  InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL, NULL);
-  SaveAndSetDebugTimerInterrupt (TRUE);
-
-  DEBUG ((EFI_D_ERROR, "UART Enabled\n"));
-
-  // Start up a free running timer so that the timer lib will work
-  TimerInit ();
-
-  // SEC phase needs to run library constructors by hand.
-  ExtractGuidedSectionLibConstructor ();
-  LzmaDecompressLibConstructor ();
-
-  // Build HOBs to pass up our version of stuff the DXE Core needs to save space
-  BuildPeCoffLoaderHob ();
-  BuildExtractSectionHob (
-    &gLzmaCustomDecompressGuid,
-    LzmaGuidedSectionGetInfo,
-    LzmaGuidedSectionExtraction
-    );
-
-  // Assume the FV that contains the SEC (our code) also contains a compressed FV.
-  DecompressFirstFv ();
-
-  // Load the DXE Core and transfer control to it
-  LoadDxeCoreFromFv (NULL, 0);
-  
-  // DXE Core should always load and never return
-  ASSERT (FALSE);
-}
-