1 files changed, 0 insertions, 100 deletions
diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibRTSM/RTSMSec.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibRTSM/RTSMSec.c
deleted file mode 100644
index 9023715ab0..0000000000
--- a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibRTSM/RTSMSec.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/** @file
-*
-*  Copyright (c) 2011-2014, ARM Limited. All rights reserved.
-*
-*  This program and the accompanying materials
-*  are licensed and made available under the terms and conditions of the BSD License
-*  which accompanies this distribution.  The full text of the license may be found at
-*  http://opensource.org/licenses/bsd-license.php
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/
-
-#include <Library/IoLib.h>
-#include <Library/ArmGicLib.h>
-#include <Library/ArmPlatformLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-
-#include <Drivers/PL310L2Cache.h>
-#include <Drivers/SP804Timer.h>
-
-#include <ArmPlatform.h>
-
-// Initialize GICv3 to expose it as a GICv2 as UEFI does not support GICv3 yet
-VOID
-InitializeGicV3 (
-  VOID
-  );
-
-/**
-  Initialize the Secure peripherals and memory regions
-
-  If Trustzone is supported by your platform then this function makes the required initialization
-  of the secure peripherals and memory regions.
-
-**/
-VOID
-ArmPlatformSecTrustzoneInit (
-  IN  UINTN                     MpId
-  )
-{
-  // No TZPC or TZASC on RTSM to initialize
-}
-
-/**
-  Initialize controllers that must setup at the early stage
-
-  Some peripherals must be initialized in Secure World.
-  For example, some L2x0 requires to be initialized in Secure World
-
-**/
-RETURN_STATUS
-ArmPlatformSecInitialize (
-  IN  UINTN                     MpId
-  )
-{
-  UINT32  Identification;
-
-  // If it is not the primary core then there is nothing to do
-  if (!ArmPlatformIsPrimaryCore (MpId)) {
-    return RETURN_SUCCESS;
-  }
-
-  // Configure periodic timer (TIMER0) for 1MHz operation
-  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
-  // Configure 1MHz clock
-  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
-  // Configure SP810 to use 1MHz clock and disable
-  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
-  // Configure SP810 to use 1MHz clock and disable
-  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
-
-  // Read the GIC Identification Register
-  Identification = ArmGicGetInterfaceIdentification (PcdGet32 (PcdGicInterruptInterfaceBase));
-
-  // Check if we are GICv3
-  if (ARM_GIC_ICCIIDR_GET_ARCH_VERSION(Identification) >= 0x3) {
-    InitializeGicV3 ();
-  }
-
-  return RETURN_SUCCESS;
-}
-
-/**
-  Call before jumping to Normal World
-
-  This function allows the firmware platform to do extra actions before
-  jumping to the Normal World
-
-**/
-VOID
-ArmPlatformSecExtraAction (
-  IN  UINTN         MpId,
-  OUT UINTN*        JumpAddress
-  )
-{
-  *JumpAddress = PcdGet64 (PcdFvBaseAddress);
-}