diff options
Diffstat (limited to 'ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c')
| -rw-r--r-- | ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c | 117 |
1 files changed, 115 insertions, 2 deletions
diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c index d4f7fc96f6..7497b5eb7f 100644 --- a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c +++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.c @@ -2,7 +2,8 @@ Serial I/O Port library functions with no library constructor/destructor
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
- Copyright (c) 2012 - 2013, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2012 - 2014, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -19,7 +20,6 @@ #include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/SerialPortLib.h>
-#include <Library/SerialPortExtLib.h>
#include <Drivers/PL011Uart.h>
@@ -110,4 +110,117 @@ SerialPortPoll ( {
return PL011UartPoll ((UINTN)PcdGet64 (PcdSerialRegisterBase));
}
+/**
+ Set new attributes to PL011.
+
+ @param BaudRate The baud rate of the serial device. If the baud rate is not supported,
+ the speed will be reduced down to the nearest supported one and the
+ variable's value will be updated accordingly.
+ @param ReceiveFifoDepth The number of characters the device will buffer on input. If the specified
+ value is not supported, the variable's value will be reduced down to the
+ nearest supported one.
+ @param Timeout If applicable, the number of microseconds the device will wait
+ before timing out a Read or a Write operation.
+ @param Parity If applicable, this is the EFI_PARITY_TYPE that is computed or checked
+ as each character is transmitted or received. If the device does not
+ support parity, the value is the default parity value.
+ @param DataBits The number of data bits in each character
+ @param StopBits If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character.
+ If the device does not support stop bits, the value is the default stop
+ bit value.
+
+ @retval EFI_SUCCESS All attributes were set correctly on the serial device.
+ @retval EFI_INVALID_PARAMETERS One or more of the attributes has an unsupported value.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ return PL011UartInitializePort (
+ (UINTN)PcdGet64 (PcdSerialRegisterBase),
+ BaudRate,
+ ReceiveFifoDepth,
+ Parity,
+ DataBits,
+ StopBits);
+}
+
+/**
+
+ Assert or deassert the control signals on a serial port.
+ The following control signals are set according their bit settings :
+ . Request to Send
+ . Data Terminal Ready
+
+ @param[in] Control The following bits are taken into account :
+ . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the
+ "Request To Send" control signal if this bit is
+ equal to one/zero.
+ . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert
+ the "Data Terminal Ready" control signal if this
+ bit is equal to one/zero.
+ . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable
+ the hardware loopback if this bit is equal to
+ one/zero.
+ . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.
+ . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/
+ disable the hardware flow control based on CTS (Clear
+ To Send) and RTS (Ready To Send) control signals.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ return PL011UartSetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param[out] Control Status of the control bits on a serial device :
+
+ . EFI_SERIAL_DATA_CLEAR_TO_SEND, EFI_SERIAL_DATA_SET_READY,
+ EFI_SERIAL_RING_INDICATE, EFI_SERIAL_CARRIER_DETECT,
+ EFI_SERIAL_REQUEST_TO_SEND, EFI_SERIAL_DATA_TERMINAL_READY
+ are all related to the DTE (Data Terminal Equipment) and
+ DCE (Data Communication Equipment) modes of operation of
+ the serial device.
+ . EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if the receive
+ buffer is empty, 0 otherwise.
+ . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if the transmit
+ buffer is empty, 0 otherwise.
+ . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to one if the
+ hardware loopback is enabled (the output feeds the receive
+ buffer), 0 otherwise.
+ . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to one if a
+ loopback is accomplished by software, 0 otherwise.
+ . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal to one if the
+ hardware flow control based on CTS (Clear To Send) and RTS
+ (Ready To Send) control signals is enabled, 0 otherwise.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial device.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ return PL011UartGetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
+}
|