diff options
Diffstat (limited to 'ArmVirtPkg/Library/FdtPL011SerialPortLib')
| -rw-r--r-- | ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c | 88 | ||||
| -rw-r--r-- | ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c | 87 |
2 files changed, 174 insertions, 1 deletions
diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c index ba6d277d45..c8bfb2972e 100644 --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c @@ -4,6 +4,7 @@ Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
Copyright (c) 2012 - 2013, ARM Ltd. All rights reserved.<BR>
Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -19,7 +20,6 @@ #include <Library/PcdLib.h>
#include <Library/SerialPortLib.h>
-#include <Library/SerialPortExtLib.h>
#include <libfdt.h>
#include <Drivers/PL011Uart.h>
@@ -183,3 +183,89 @@ SerialPortPoll ( {
return FALSE;
}
+
+/**
+ Sets the control bits on a serial device.
+
+ @param[in] Control Sets the bits of Control that are settable.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param[out] Control A pointer to return the current control signals from the serial device.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data bits, and stop bits on a serial device.
+
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
+ device's default interface speed.
+ On output, the value actually set.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's default FIFO depth.
+ On output, the value actually set.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ On output, the value actually set.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ On output, the value actually set.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ On output, the value actually set.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+ On output, the value actually set.
+
+ @retval RETURN_SUCCESS The new attributes were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c index aced6666a9..b73ab8f48a 100644 --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c @@ -5,6 +5,7 @@ Copyright (c) 2012 - 2013, ARM Ltd. All rights reserved.<BR>
Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
Copyright (c) 2014, Red Hat, Inc.<BR>
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -148,3 +149,89 @@ SerialPortPoll ( }
return FALSE;
}
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data bits, and stop bits on a serial device.
+
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
+ device's default interface speed.
+ On output, the value actually set.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's default FIFO depth.
+ On output, the value actually set.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ On output, the value actually set.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ On output, the value actually set.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ On output, the value actually set.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+ On output, the value actually set.
+
+ @retval RETURN_SUCCESS The new attributes were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Sets the control bits on a serial device.
+
+ @param Control Sets the bits of Control that are settable.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param Control A pointer to return the current control signals from the serial device.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ return RETURN_UNSUPPORTED;
+}
+
|