diff options
Diffstat (limited to 'BaseTools/Conf/build_rule.template')
| -rwxr-xr-x | BaseTools/Conf/build_rule.template | 649 |
1 files changed, 0 insertions, 649 deletions
diff --git a/BaseTools/Conf/build_rule.template b/BaseTools/Conf/build_rule.template deleted file mode 100755 index 1db94b696f..0000000000 --- a/BaseTools/Conf/build_rule.template +++ /dev/null @@ -1,649 +0,0 @@ -#
-# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
-# Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-## Syntax
-#
-# "*" is used to indicate that the source files will be processed at the same time.
-# "?" is used to indicate that the source files will be processed one by one.
-#
-# "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
-# <InputFile[.<ToolChainFamily>]> <EOL>
-# (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
-#
-# <OutputFile[.<ToolChainFamily>]> <EOL>
-# <FileFullPath>
-#
-# <ExtraDependency>
-# <FileFullPath>
-#
-# <Command[.<ToolChainFamily>]> <EOL>
-# <Command1>
-# [<Command2>]
-#
-# <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE in EDK.
-# Missing <InputFile> will cause an exception and break build.
-# Missing <Command> will cause that related build target won't be generated but
-# won't break build.
-#
-
-## Placeholders for string substitution
-#
-# ${src} Source file(s) to be built (full path)
-# ${s_path} Source file directory (absolute path)
-# ${s_dir} Source file relative directory within a module
-# (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
-# ${s_name} Source file name without path
-# ${s_base} Source file name without extension and path
-# ${s_ext} Source file extension
-#
-# ${dst} Destination file(s) built from ${src} (full path)
-# ${d_path} Destination file directory (absolute path)
-# ${d_name} Destination file name without path
-# ${d_base} Destination file name without extension and path
-# ${d_ext} Destination file extension
-#
-# (+) Directory separator
-#
-
-## Macro
-# $(WORKSPACE) Workspace directory
-# $(OUTPUT_DIR) Directory for intermediate files for building a module
-# $(DEBUG_DIR) Directory for files used to debug a module
-# $(BUILD_DIR) All files for building a platform will be put in this directory
-# $(BIN_DIR) Common directory for executable files
-# $(FV_DIR) Directory to store flash image files
-# $(INC) Search path of current module
-# $(INC_LIST) A file containing search pathes of current module
-# $(LIBS) Static library files of current module
-# $(<tool>_FLAGS) Tools flags of current module
-# $(MODULE_NAME) Current module name
-# $(MODULE_NAME_GUID) Current module name with module FILE_GUID if same $(MODULE_NAME) exists
-# in different modules, otherwise its value is same as $(MODULE_NAME)
-# $(MODULE_TYPE) Current module type
-# $(MODULE_GUID) Current module guid
-# $(ARCH) Architecture of current module
-# $(TOOLCHAIN) Toolchain used to build current module
-# $(TARGET) Target of current module (DEBUG/RELEASE)
-# $(<tool>) Path of tool
-# $(EDK_TOOLS_PATH) Path of build tools
-# $(<FILE_TYPES>) File list of each file type
-# (Note: The macro name is derived from file type name. For example,
-# C-Code-File will have C_CODE_FILES macro.)
-# $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
-# (
-# Note: The macro and file name are derived from file type name.
-# For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
-# to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
-# will be generated only when this macro is used in command line.
-# This is intended to get over the long command line limitation.
-# )
-#
-# $(CP) copy command
-# $(MV) move command
-# $(RM) delete command
-# $(MD) create dir command
-# $(RD) remove dir command
-#
-
-## Reserved File-Type
-#
-# Don't change following names of file types and their associated files,
-# which are also used in tools' code
-#
-# C-Code-File
-# C-Header-File
-# Dynamic-Library-File
-# Static-Library-File
-# Visual-Form-Representation-File
-# Unicode-Text-File
-#
-
-## Build Rule Version Number
-# build_rule_version=0.1
-#
-
-[C-Code-File]
- <InputFile>
- ?.c
- ?.C
- ?.cc
- ?.CC
- ?.cpp
- ?.Cpp
- ?.CPP
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
-
- <Command.MSFT, Command.INTEL>
- "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
-
- <Command.GCC, Command.GCCLD, Command.RVCT>
- # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
- "$(CC)" $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
-
- <Command.XCODE>
- "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
-
-[C-Code-File.COMMON.IPF]
- <InputFile>
- ?.c
- ?.C
- ?.cc
- ?.CC
- ?.cpp
- ?.Cpp
- ?.CPP
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
-
- <Command.MSFT, Command.INTEL>
- "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
-
- <Command.GCC, Command.GCCLD, Command.RVCT>
- # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
- "$(CC)" $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
- "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
-
-[C-Code-File.BASE.AARCH64,C-Code-File.SEC.AARCH64,C-Code-File.PEI_CORE.AARCH64,C-Code-File.PEIM.AARCH64,C-Code-File.BASE.ARM,C-Code-File.SEC.ARM,C-Code-File.PEI_CORE.ARM,C-Code-File.PEIM.ARM]
- <InputFile>
- ?.c
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
-
- <Command.GCC, Command.GCCLD, Command.RVCT>
- "$(CC)" $(CC_FLAGS) $(CC_XIPFLAGS) -c -o ${dst} $(INC) ${src}
-
-[C-Header-File]
- <InputFile>
- *.h, *.H
-
- <OutputFile>
-
- <Command>
-
-
-[Assembly-Code-File.COMMON.COMMON]
- <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
- ?.asm, ?.Asm, ?.ASM
-
- <InputFile.GCC, InputFile.GCCLD>
- ?.S, ?.s
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
-
- <Command.MSFT, Command.INTEL>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
-
- <Command.GCC, Command.GCCLD, Command.RVCT>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
- "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
-
-[Nasm-Assembly-Code-File.COMMON.COMMON]
- <InputFile>
- ?.nasm
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
-
- <Command>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(NASM)" -I${s_path}(+) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
-
-[Assembly-Code-File.COMMON.IPF]
- <InputFile>
- ?.s
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
-
- <Command.MSFT, Command.INTEL>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
- "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
-
-[Visual-Form-Representation-File]
- <InputFile>
- ?.vfr
- ?.Vfr
- ?.VFR
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
-
- <Command>
- "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
- "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
-
-[Object-File]
- <InputFile>
- *.obj
- *.o
-
- <OutputFile>
- $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
-
- <Command.MSFT, Command.INTEL>
- "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
-
- <Command.GCC, Command.GCCLD>
- "$(SLINK)" cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
-
- <Command.RVCT>
- "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
-
- <Command.RVCTCYGWIN>
- # $(OBJECT_FILES_LIST) has wrong paths for cygwin
- "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
-
- <Command.XCODE>
- "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
-
-[Static-Library-File]
- <InputFile>
- *.lib
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(DEBUG_DIR)(+)$(MODULE_NAME).dll
-
- <Command.MSFT, Command.INTEL>
- "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
-
- <Command.GCC>
- "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(CC_FLAGS) $(DLINK2_FLAGS)
- "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
-
- <Command.GCCLD>
- "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
- "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
-
- <Command.RVCT>
- "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
-
- <Command.RVCTCYGWIN>
- #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
- "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
-
- <Command.XCODE>
- "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
-
-
-[Static-Library-File.SEC.AARCH64, Static-Library-File.PEI_CORE.AARCH64, Static-Library-File.PEIM.AARCH64,Static-Library-File.SEC.ARM, Static-Library-File.PEI_CORE.ARM, Static-Library-File.PEIM.ARM]
- <InputFile>
- *.lib
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(DEBUG_DIR)(+)$(MODULE_NAME).dll
-
- <Command.GCC>
- "$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(DLINK_XIPFLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(CC_FLAGS) $(CC_XIPFLAGS) $(DLINK2_FLAGS)
- "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
-
-
-[Static-Library-File.USER_DEFINED]
- <InputFile>
- *.lib
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(DEBUG_DIR)(+)$(MODULE_NAME)
-
- <Command.MSFT, Command.INTEL>
- "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
-
- <Command.GCC>
- "$(DLINK)" $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(DLINK2_FLAGS)
-
- <Command.GCCLD>
- "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
-
- <Command.RVCT>
- "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
-
- <Command.RVCTCYGWIN>
- #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
- "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
-
- <Command.XCODE>
- "$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
-
-
-[Dynamic-Library-File]
- <InputFile>
- ?.dll
-
- <OutputFile>
- $(DEBUG_DIR)(+)$(MODULE_NAME).efi
-
- <Command.MSFT, Command.INTEL, Command.RVCT>
- "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
- $(CP) ${dst} $(OUTPUT_DIR)
- $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
- -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
- -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR)
- <Command.GCC, Command.GCCLD>
- $(CP) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
- $(OBJCOPY) --strip-unneeded -R .eh_frame ${src}
-
- #
- #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
- #
- -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
- -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)(+)$(MODULE_NAME_GUID).debug
-
- "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
- $(CP) ${dst} $(OUTPUT_DIR)
- $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
- -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
-
- <Command.XCODE>
- # tool to convert Mach-O to PE/COFF
- "$(MTOC)" -subsystem $(MODULE_TYPE) $(MTOC_FLAGS) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
- # create symbol file for GDB debug
- -$(DSYMUTIL) ${src}
- "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
- $(CP) ${dst} $(OUTPUT_DIR)
- $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
- -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
-
-[Dependency-Expression-File]
- <InputFile>
- ?.dxs, ?.Dxs, ?.DXS
-
- <OutputFile>
- $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <Command>
- "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
- Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
- GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
-
-[Acpi-Source-Language-File]
- <InputFile>
- ?.asl, ?.Asl, ?.ASL
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <Command.MSFT, Command.INTEL>
- Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
- "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
- Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
- "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
-
- <Command.GCC, Command.GCCLD>
- Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
- "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
- Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
- "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
-
-[C-Code-File.AcpiTable]
- <InputFile>
- ?.c
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <Command.MSFT, Command.INTEL>
- "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
- "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
- "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
-
- <Command.GCC, Command.GCCLD>
- "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
- "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
- "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
-
-[Acpi-Table-Code-File]
- <InputFile>
- ?.aslc, ?.act
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <Command.MSFT, Command.INTEL>
- "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
- "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
- "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
-
- <Command.GCC, Command.GCCLD>
- "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
- "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
- "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
-
- <Command.XCODE>
- "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
- "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
- "$(MTOC)" -subsystem $(MODULE_TYPE) $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
- "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
-
-
-[Masm16-Code-File]
- <InputFile>
- ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_base}.com
-
- <Command.MSFT, Command.INTEL>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- cd $(OUTPUT_DIR)(+)${s_dir}
- "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
- "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
-
- <Command.GCC, Command.GCCLD>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
- "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
-
- <Command.XCODE>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
- "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
- otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
-
-
-[Nasm-to-Binary-Code-File]
- <InputFile>
- ?.nasmb
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_base}.bin
-
- <Command>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
- # copy the output file with .com postfix that be same to the output file of .asm16
- $(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com
-
-[Microcode-File.USER_DEFINED, Microcode-File.Microcode]
- <InputFile>
- ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_base}.mcb
-
- <Command>
- "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
-
-[Microcode-Binary-File]
- <InputFile>
- *.mcb
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
-
- <Command>
- "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
- -$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).bin
-
-[EFI-Image-File]
- <InputFile>
- ?.efi, ?.Efi, ?.EFI
-
- <OutputFile>
-
- <Command>
-
-[Unicode-Text-File]
- <InputFile>
- *.uni, *.Uni, *.UNI
-
- <OutputFile>
- $(DEBUG_DIR)(+)AutoGen.c
- $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
- $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
-
- <Command>
-
-[Image-Definition-File]
- <InputFile>
- *.idf, *.Idf, *.IDF
-
- <OutputFile>
- $(DEBUG_DIR)(+)AutoGen.c
- $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
- $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk
-
- <Command>
-
-[Efi-Image.UEFI_OPTIONROM]
- <InputFile>
- ?.efi, ?.EFI, ?.Efi
-
- <OutputFile>
- $(BIN_DIR)(+)$(MODULE_NAME_GUID).rom
-
- <Command>
- $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
-
-[Unicode-Text-File.UEFI_HII]
- <InputFile>
- *.uni, *.Uni, *.UNI
-
- <OutputFile>
- $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
- $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
-
- <Command>
-
-[Image-Definition-File.UEFI_HII]
- <InputFile>
- *.idf, *.Idf, *.IDF
-
- <OutputFile>
- $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
- $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk
-
- <Command>
-
-[Visual-Form-Representation-File.UEFI_HII]
- <InputFile>
- ?.vfr
- ?.Vfr
- ?.VFR
-
- <ExtraDependency>
- $(MAKE_FILE)
-
- <OutputFile>
- $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
-
- <Command>
- "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
- "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
-
-[Hii-Binary-Package.UEFI_HII]
- <InputFile>
- *.hpk
-
- <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
- $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
-
- <OutputFile.XCODE, OutputFile.RVCT>
- $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
-
- <Command.MSFT, Command.INTEL>
- "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
- "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
-
- <Command.GCC, Command.GCCLD>
- "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
- "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
-
- <Command.XCODE, Command.RVCT>
- GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
-
-
|