diff options
Diffstat (limited to 'BeagleBoardPkg/AppleBeagleBoardPkg.fdf')
| -rw-r--r-- | BeagleBoardPkg/AppleBeagleBoardPkg.fdf | 303 |
1 files changed, 0 insertions, 303 deletions
diff --git a/BeagleBoardPkg/AppleBeagleBoardPkg.fdf b/BeagleBoardPkg/AppleBeagleBoardPkg.fdf deleted file mode 100644 index 9852dfdd3f..0000000000 --- a/BeagleBoardPkg/AppleBeagleBoardPkg.fdf +++ /dev/null @@ -1,303 +0,0 @@ -# FLASH layout file for Beagle board. -# -# Copyright (c) 2009, Apple Inc. All rights reserved. -# -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -################################################################################ -# -# FD Section -# The [FD] Section is made up of the definition statements and a -# description of what goes into the Flash Device Image. Each FD section -# defines one flash "device" image. A flash device image may be one of -# the following: Removable media bootable image (like a boot floppy -# image,) an Option ROM image (that would be "flashed" into an add-in -# card,) a System "Flash" image (that would be burned into a system's -# flash) or an Update ("Capsule") image that will be used to update and -# existing system flash. -# -################################################################################ - - -[FD.BeagleBoard_EFI] -BaseAddress = 0x80008000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress #The base address of the FLASH Device. -Size = 0x00080000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize #The size in bytes of the FLASH Device -ErasePolarity = 1 -BlockSize = 0x40 -NumBlocks = 0x2000 - -################################################################################ -# -# Following are lists of FD Region layout which correspond to the locations of different -# images within the flash device. -# -# Regions must be defined in ascending order and may not overlap. -# -# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by -# the pipe "|" character, followed by the size of the region, also in hex with the leading -# "0x" characters. Like: -# Offset|Size -# PcdOffsetCName|PcdSizeCName -# RegionType <FV, DATA, or FILE> -# -################################################################################ - -# 512 bytes of configuration header & 8 bytes of image header -0x00000000|0x00000208 - -0x00000208|0x0007FDF8 -gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize -FV = FVMAIN_COMPACT - -################################################################################ -# -# FV Section -# -# [FV] section is used to define what components or modules are placed within a flash -# device file. This section also defines order the components and modules are positioned -# within the image. The [FV] section consists of define statements, set statements and -# module statements. -# -################################################################################ - -[FV.FvMain] -BlockSize = 0x40 -NumBlocks = 0x9000 -FvAlignment = 8 #FV alignment and FV attributes setting. -ERASE_POLARITY = 1 -MEMORY_MAPPED = TRUE -STICKY_WRITE = TRUE -LOCK_CAP = TRUE -LOCK_STATUS = TRUE -WRITE_DISABLED_CAP = TRUE -WRITE_ENABLED_CAP = TRUE -WRITE_STATUS = TRUE -WRITE_LOCK_CAP = TRUE -WRITE_LOCK_STATUS = TRUE -READ_DISABLED_CAP = TRUE -READ_ENABLED_CAP = TRUE -READ_STATUS = TRUE -READ_LOCK_CAP = TRUE -READ_LOCK_STATUS = TRUE - - # - # PI DXE Drivers producing Architectural Protocols (EFI Services) - # - INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf - - INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf - INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf - INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf - INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf - INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf - INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf - - INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf - - INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf - INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf - INF EmbeddedPkg/TemplateMetronomeDxe/TemplateMetronomeDxe.inf - - # - # Semi-hosting filesystem - # - INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf - - # - # Nand Flash - # - INF BeagleBoardPkg/Flash/Flash.inf - - # - # MMC/SD - # - INF BeagleBoardPkg/MMCHSDxe/MMCHS.inf - - # - # I2C - # - INF BeagleBoardPkg/SmbusDxe/Smbus.inf - - # - # SoC Drivers - # - INF BeagleBoardPkg/Gpio/Gpio.inf - INF BeagleBoardPkg/InterruptDxe/InterruptDxe.inf - INF BeagleBoardPkg/TimerDxe/TimerDxe.inf - - # - # Power IC - # - INF BeagleBoardPkg/TPS65950Dxe/TPS65950.inf - - # - # FAT filesystem + GPT/MBR partitioning - # - INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf - INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf - INF EnhancedFat/FatDxe/FatDxe.inf - INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf - - # - # USB Support - # - - INF BeagleBoardPkg/PciEmulation/PciEmulation.inf - INF AppleCommonPkg/Bus/Pci/EhciDxe/Ehci.inf - INF AppleCommonPkg/Bus/Usb/UsbBotDxe/UsbBot.inf - INF AppleCommonPkg/Bus/Usb/UsbCbiDxe/Cbi0/UsbCbi0.inf - INF AppleCommonPkg/Bus/Usb/UsbCbiDxe/Cbi1/UsbCbi1.inf - INF AppleCommonPkg/Bus/Usb/UsbBusDxe/UsbBus.inf - INF AppleCommonPkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorage.inf - - - #NOTE: Open source EHCI stack doesn't work on Beagleboard. - #NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain. - #INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf - #INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf - #INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf - - # - # UEFI application (Shell Embedded Boot Loader) - # - INF EmbeddedPkg/Ebl/Ebl.inf - - - # - # Bds - # - INF BeagleBoardPkg/Bds/Bds.inf - - # - # Gdb Stub - # - #INF ArmPkg/Drivers/DebugSupportDxe/DebugSupportDxe.inf - #INF ApplePkg/Universal/GdbStub/GdbStub.inf - - -[FV.FVMAIN_COMPACT] -FvAlignment = 8 -ERASE_POLARITY = 1 -MEMORY_MAPPED = TRUE -STICKY_WRITE = TRUE -LOCK_CAP = TRUE -LOCK_STATUS = TRUE -WRITE_DISABLED_CAP = TRUE -WRITE_ENABLED_CAP = TRUE -WRITE_STATUS = TRUE -WRITE_LOCK_CAP = TRUE -WRITE_LOCK_STATUS = TRUE -READ_DISABLED_CAP = TRUE -READ_ENABLED_CAP = TRUE -READ_STATUS = TRUE -READ_LOCK_CAP = TRUE -READ_LOCK_STATUS = TRUE - - INF BeagleBoardPkg/Sec/Sec.inf - INF MdeModulePkg/Core/Dxe/DxeMain.inf - - FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { - SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { - SECTION FV_IMAGE = FVMAIN - } - } - - -################################################################################ -# -# Rules are use with the [FV] section's module INF type to define -# how an FFS file is created for a given INF file. The following Rule are the default -# rules for the different module type. User can add the customized rules to define the -# content of the FFS file. -# -################################################################################ - - -############################################################################ -# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # -############################################################################ -# -#[Rule.Common.DXE_DRIVER] -# FILE DRIVER = $(NAMED_GUID) { -# DXE_DEPEX DXE_DEPEX Optional |.depex -# COMPRESS PI_STD { -# GUIDED { -# PE32 PE32 |.efi -# UI STRING="$(MODULE_NAME)" Optional -# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) -# } -# } -# } -# -############################################################################ - -[Rule.Common.SEC] - FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { - TE TE Align = 8 |.efi - } - -[Rule.Common.PEI_CORE] - FILE PEI_CORE = $(NAMED_GUID) { - TE TE |.efi - UI STRING ="$(MODULE_NAME)" Optional - } - -[Rule.Common.PEIM] - FILE PEIM = $(NAMED_GUID) { - PEI_DEPEX PEI_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.PEIM.TIANOCOMPRESSED] - FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 { - PEI_DEPEX PEI_DEPEX Optional |.depex - GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - } - -[Rule.Common.DXE_CORE] - FILE DXE_CORE = $(NAMED_GUID) { - GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - } - - -[Rule.Common.UEFI_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.DXE_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.DXE_RUNTIME_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - - -[Rule.Common.UEFI_APPLICATION] - FILE APPLICATION = $(NAMED_GUID) { - UI STRING ="$(MODULE_NAME)" Optional - PE32 PE32 |.efi - } |