diff options
Diffstat (limited to 'BeagleBoardPkg/BeagleBoardPkg-next.fdf')
-rwxr-xr-x | BeagleBoardPkg/BeagleBoardPkg-next.fdf | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/BeagleBoardPkg/BeagleBoardPkg-next.fdf b/BeagleBoardPkg/BeagleBoardPkg-next.fdf new file mode 100755 index 0000000000..a3695bbe7b --- /dev/null +++ b/BeagleBoardPkg/BeagleBoardPkg-next.fdf @@ -0,0 +1,294 @@ +# FLASH layout file for Beagle board. +# +# Copyright (c) 2009, Apple Inc. All rights reserved.<BR> +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +################################################################################ +# +# FD Section +# The [FD] Section is made up of the definition statements and a +# description of what goes into the Flash Device Image. Each FD section +# defines one flash "device" image. A flash device image may be one of +# the following: Removable media bootable image (like a boot floppy +# image,) an Option ROM image (that would be "flashed" into an add-in +# card,) a System "Flash" image (that would be burned into a system's +# flash) or an Update ("Capsule") image that will be used to update and +# existing system flash. +# +################################################################################ + + +[FD.BeagleBoard_EFI] +BaseAddress = 0x80008000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress #The base address of the FLASH Device. +Size = 0x00080000|gArmTokenSpaceGuid.PcdNormalFdSize #The size in bytes of the FLASH Device +ErasePolarity = 1 +BlockSize = 0x1 +NumBlocks = 0x80000 + +################################################################################ +# +# Following are lists of FD Region layout which correspond to the locations of different +# images within the flash device. +# +# Regions must be defined in ascending order and may not overlap. +# +# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by +# the pipe "|" character, followed by the size of the region, also in hex with the leading +# "0x" characters. Like: +# Offset|Size +# PcdOffsetCName|PcdSizeCName +# RegionType <FV, DATA, or FILE> +# +################################################################################ +!if $(EDK2_SECOND_STAGE_BOOTOLADER) == 1 +0x00000000|0x00080000 +!else +# 512 bytes of configuration header & 8 bytes of image header +0x00000000|0x00000208 + +0x00000208|0x0007FDF8 +!endif +gArmTokenSpaceGuid.PcdNormalFvBaseAddress|gArmTokenSpaceGuid.PcdNormalFvBaseSize +FV = FVMAIN_COMPACT + +################################################################################ +# +# FV Section +# +# [FV] section is used to define what components or modules are placed within a flash +# device file. This section also defines order the components and modules are positioned +# within the image. The [FV] section consists of define statements, set statements and +# module statements. +# +################################################################################ + +[FV.FvMain] +BlockSize = 0x1 +NumBlocks = 0 # This FV gets compressed so make it just big enough +FvAlignment = 8 # FV alignment and FV attributes setting. +ERASE_POLARITY = 1 +MEMORY_MAPPED = TRUE +STICKY_WRITE = TRUE +LOCK_CAP = TRUE +LOCK_STATUS = TRUE +WRITE_DISABLED_CAP = TRUE +WRITE_ENABLED_CAP = TRUE +WRITE_STATUS = TRUE +WRITE_LOCK_CAP = TRUE +WRITE_LOCK_STATUS = TRUE +READ_DISABLED_CAP = TRUE +READ_ENABLED_CAP = TRUE +READ_STATUS = TRUE +READ_LOCK_CAP = TRUE +READ_LOCK_STATUS = TRUE + + INF MdeModulePkg/Core/Dxe/DxeMain.inf + + # + # PI DXE Drivers producing Architectural Protocols (EFI Services) + # + INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf + + INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf + INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf + INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf + INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf + INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf + INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf + + INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf + + INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf + INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf + INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf + + # + # Semi-hosting filesystem + # + INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf + + # + # Nand Flash + # + INF Omap35xxPkg/Flash/Flash.inf + + # + # MMC/SD + # + INF Omap35xxPkg/MMCHSDxe/MMCHS.inf + + # + # I2C + # + INF Omap35xxPkg/SmbusDxe/Smbus.inf + + # + # SoC Drivers + # + INF Omap35xxPkg/Gpio/Gpio.inf + INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf + INF Omap35xxPkg/TimerDxe/TimerDxe.inf + + # + # Power IC + # + INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf + + # + # FAT filesystem + GPT/MBR partitioning + # + INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf + INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf + INF FatPkg/EnhancedFatDxe/Fat.inf + INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf + + # + # USB Support + # + + INF Omap35xxPkg/PciEmulation/PciEmulation.inf + + #NOTE: Open source EHCI stack doesn't work on Beagleboard. + #NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain. + INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf + INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf + INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf + + # + # UEFI application (Shell Embedded Boot Loader) + # + INF EmbeddedPkg/Ebl/Ebl.inf + + # + # Bds + # + INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf + INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf + INF ArmPlatformPkg/Bds/Bds.inf + + + +[FV.FVMAIN_COMPACT] +FvAlignment = 8 +ERASE_POLARITY = 1 +MEMORY_MAPPED = TRUE +STICKY_WRITE = TRUE +LOCK_CAP = TRUE +LOCK_STATUS = TRUE +WRITE_DISABLED_CAP = TRUE +WRITE_ENABLED_CAP = TRUE +WRITE_STATUS = TRUE +WRITE_LOCK_CAP = TRUE +WRITE_LOCK_STATUS = TRUE +READ_DISABLED_CAP = TRUE +READ_ENABLED_CAP = TRUE +READ_STATUS = TRUE +READ_LOCK_CAP = TRUE +READ_LOCK_STATUS = TRUE + + INF ArmPlatformPkg/PrePi/PeiUniCore.inf + + FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { + SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { + SECTION FV_IMAGE = FVMAIN + } + } + + +################################################################################ +# +# Rules are use with the [FV] section's module INF type to define +# how an FFS file is created for a given INF file. The following Rule are the default +# rules for the different module type. User can add the customized rules to define the +# content of the FFS file. +# +################################################################################ + + +############################################################################ +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # +############################################################################ +# +#[Rule.Common.DXE_DRIVER] +# FILE DRIVER = $(NAMED_GUID) { +# DXE_DEPEX DXE_DEPEX Optional |.depex +# COMPRESS PI_STD { +# GUIDED { +# PE32 PE32 |.efi +# UI STRING="$(MODULE_NAME)" Optional +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) +# } +# } +# } +# +############################################################################ + +[Rule.Common.SEC] + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { + TE TE Align = 32 |.efi + } + +[Rule.Common.PEI_CORE] + FILE PEI_CORE = $(NAMED_GUID) { + TE TE |.efi + UI STRING ="$(MODULE_NAME)" Optional + } + +[Rule.Common.PEIM] + FILE PEIM = $(NAMED_GUID) { + PEI_DEPEX PEI_DEPEX Optional |.depex + PE32 PE32 |.efi + UI STRING="$(MODULE_NAME)" Optional + } + +[Rule.Common.PEIM.TIANOCOMPRESSED] + FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 { + PEI_DEPEX PEI_DEPEX Optional |.depex + GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { + PE32 PE32 |.efi + UI STRING="$(MODULE_NAME)" Optional + } + } + +[Rule.Common.DXE_CORE] + FILE DXE_CORE = $(NAMED_GUID) { + PE32 PE32 |.efi + UI STRING="$(MODULE_NAME)" Optional + } + + +[Rule.Common.UEFI_DRIVER] + FILE DRIVER = $(NAMED_GUID) { + DXE_DEPEX DXE_DEPEX Optional |.depex + PE32 PE32 |.efi + UI STRING="$(MODULE_NAME)" Optional + } + +[Rule.Common.DXE_DRIVER] + FILE DRIVER = $(NAMED_GUID) { + DXE_DEPEX DXE_DEPEX Optional |.depex + PE32 PE32 |.efi + UI STRING="$(MODULE_NAME)" Optional + } + +[Rule.Common.DXE_RUNTIME_DRIVER] + FILE DRIVER = $(NAMED_GUID) { + DXE_DEPEX DXE_DEPEX Optional |.depex + PE32 PE32 |.efi + UI STRING="$(MODULE_NAME)" Optional + } + + +[Rule.Common.UEFI_APPLICATION] + FILE APPLICATION = $(NAMED_GUID) { + UI STRING ="$(MODULE_NAME)" Optional + PE32 PE32 |.efi + } |