diff options
Diffstat (limited to 'BeagleBoardPkg/BeagleBoardPkg.fdf')
| -rw-r--r-- | BeagleBoardPkg/BeagleBoardPkg.fdf | 320 |
1 files changed, 0 insertions, 320 deletions
diff --git a/BeagleBoardPkg/BeagleBoardPkg.fdf b/BeagleBoardPkg/BeagleBoardPkg.fdf deleted file mode 100644 index b17ad7d024..0000000000 --- a/BeagleBoardPkg/BeagleBoardPkg.fdf +++ /dev/null @@ -1,320 +0,0 @@ -# FLASH layout file for Beagle board.
-#
-# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
-# Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-################################################################################
-#
-# FD Section
-# The [FD] Section is made up of the definition statements and a
-# description of what goes into the Flash Device Image. Each FD section
-# defines one flash "device" image. A flash device image may be one of
-# the following: Removable media bootable image (like a boot floppy
-# image,) an Option ROM image (that would be "flashed" into an add-in
-# card,) a System "Flash" image (that would be burned into a system's
-# flash) or an Update ("Capsule") image that will be used to update and
-# existing system flash.
-#
-################################################################################
-
-
-[FD.BeagleBoard_EFI]
-BaseAddress = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device.
-Size = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device
-ErasePolarity = 1
-BlockSize = 0x1
-NumBlocks = 0xB0000
-
-################################################################################
-#
-# Following are lists of FD Region layout which correspond to the locations of different
-# images within the flash device.
-#
-# Regions must be defined in ascending order and may not overlap.
-#
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
-# the pipe "|" character, followed by the size of the region, also in hex with the leading
-# "0x" characters. Like:
-# Offset|Size
-# PcdOffsetCName|PcdSizeCName
-# RegionType <FV, DATA, or FILE>
-#
-################################################################################
-0x00000000|0x00000200
-FILE = BeagleBoardPkg/ConfigurationHeader.bin
-
-0x00000200|0x00000008
-DATA = {
- 0xF8, 0xFD, 0x0A, 0x00, # image size: 0xB0000 - 0x208 == 0xAFDF8
- 0x00, 0x80, 0x00, 0x80 # entry point: 0x80008000
-}
-
-0x00000208|0x000AFDF8
-gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
-FV = FVMAIN_COMPACT
-
-################################################################################
-#
-# FV Section
-#
-# [FV] section is used to define what components or modules are placed within a flash
-# device file. This section also defines order the components and modules are positioned
-# within the image. The [FV] section consists of define statements, set statements and
-# module statements.
-#
-################################################################################
-
-[FV.FvMain]
-BlockSize = 0x1
-NumBlocks = 0 # This FV gets compressed so make it just big enough
-FvAlignment = 8 # FV alignment and FV attributes setting.
-ERASE_POLARITY = 1
-MEMORY_MAPPED = TRUE
-STICKY_WRITE = TRUE
-LOCK_CAP = TRUE
-LOCK_STATUS = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP = TRUE
-WRITE_STATUS = TRUE
-WRITE_LOCK_CAP = TRUE
-WRITE_LOCK_STATUS = TRUE
-READ_DISABLED_CAP = TRUE
-READ_ENABLED_CAP = TRUE
-READ_STATUS = TRUE
-READ_LOCK_CAP = TRUE
-READ_LOCK_STATUS = TRUE
-FvNameGuid = d0dd3e90-343d-4cb3-8f69-772214989282
-
- INF MdeModulePkg/Core/Dxe/DxeMain.inf
-
- #
- # PI DXE Drivers producing Architectural Protocols (EFI Services)
- #
- INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
-
- INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
- INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
- INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
- INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
- INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
- INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
-
- INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
- INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
- INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
- INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
- INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
-
- INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
- INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
- INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
-
-!if $(TARGET) == RELEASE
- #
- # Semi-hosting filesystem
- #
- INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
-!endif
-
- #
- # Nand Flash
- #
- INF Omap35xxPkg/Flash/Flash.inf
-
- #
- # MMC/SD
- #
- INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
- INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf
-
- #
- # I2C
- #
- INF Omap35xxPkg/SmbusDxe/Smbus.inf
-
- #
- # SoC Drivers
- #
- INF Omap35xxPkg/Gpio/Gpio.inf
- INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
- INF Omap35xxPkg/TimerDxe/TimerDxe.inf
- INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
-
- #
- # Power IC
- #
- INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
-
- #
- # FAT filesystem + GPT/MBR partitioning
- #
- INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
- INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
- INF FatBinPkg/EnhancedFatDxe/Fat.inf
- INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
-
- #
- # USB Support
- #
-
- INF Omap35xxPkg/PciEmulation/PciEmulation.inf
-
- INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
- INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
- INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
-
- #
- # UEFI application (Shell Embedded Boot Loader)
- #
- INF ShellBinPkg/UefiShell/UefiShell.inf
-
- #
- # Bds
- #
- INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
- INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
- INF ArmPlatformPkg/Bds/Bds.inf
-
- # Legacy Linux Loader
- INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf
-
-
-[FV.FVMAIN_COMPACT]
-FvAlignment = 8
-ERASE_POLARITY = 1
-MEMORY_MAPPED = TRUE
-STICKY_WRITE = TRUE
-LOCK_CAP = TRUE
-LOCK_STATUS = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP = TRUE
-WRITE_STATUS = TRUE
-WRITE_LOCK_CAP = TRUE
-WRITE_LOCK_STATUS = TRUE
-READ_DISABLED_CAP = TRUE
-READ_ENABLED_CAP = TRUE
-READ_STATUS = TRUE
-READ_LOCK_CAP = TRUE
-READ_LOCK_STATUS = TRUE
-
- INF ArmPlatformPkg/PrePi/PeiUniCore.inf
-
- FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
- SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
- SECTION FV_IMAGE = FVMAIN
- }
- }
-
-
-################################################################################
-#
-# Rules are use with the [FV] section's module INF type to define
-# how an FFS file is created for a given INF file. The following Rule are the default
-# rules for the different module type. User can add the customized rules to define the
-# content of the FFS file.
-#
-################################################################################
-
-
-############################################################################
-# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
-############################################################################
-#
-#[Rule.Common.DXE_DRIVER]
-# FILE DRIVER = $(NAMED_GUID) {
-# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
-# COMPRESS PI_STD {
-# GUIDED {
-# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
-# UI STRING="$(MODULE_NAME)" Optional
-# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
-# }
-# }
-# }
-#
-############################################################################
-
-[Rule.Common.SEC]
- FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
- TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- }
-
-[Rule.Common.PEI_CORE]
- FILE PEI_CORE = $(NAMED_GUID) {
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING ="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.PEIM]
- FILE PEIM = $(NAMED_GUID) {
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.PEIM.TIANOCOMPRESSED]
- FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
- }
-
-[Rule.Common.DXE_CORE]
- FILE DXE_CORE = $(NAMED_GUID) {
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-
-[Rule.Common.UEFI_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.DXE_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.DXE_RUNTIME_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.UEFI_APPLICATION]
- FILE APPLICATION = $(NAMED_GUID) {
- UI STRING ="$(MODULE_NAME)" Optional
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- }
-
-[Rule.Common.UEFI_DRIVER.BINARY]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional |.depex
- PE32 PE32 |.efi
- UI STRING="$(MODULE_NAME)" Optional
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
- }
-
-[Rule.Common.UEFI_APPLICATION.BINARY]
- FILE APPLICATION = $(NAMED_GUID) {
- PE32 PE32 |.efi
- UI STRING="$(MODULE_NAME)" Optional
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
- }
|