diff options
Diffstat (limited to 'BeagleBoardPkg/Library/BeagleBoardLib')
7 files changed, 0 insertions, 764 deletions
diff --git a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoard.c b/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoard.c deleted file mode 100755 index dbbe68a7a0..0000000000 --- a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoard.c +++ /dev/null @@ -1,135 +0,0 @@ -/** @file
-*
-* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
-*
-* This program and the accompanying materials
-* are licensed and made available under the terms and conditions of the BSD License
-* which accompanies this distribution. The full text of the license may be found at
-* http://opensource.org/licenses/bsd-license.php
-*
-* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/
-
-#include <Library/IoLib.h>
-#include <Library/ArmPlatformLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-
-#include <Omap3530/Omap3530.h>
-#include <BeagleBoard.h>
-
-VOID
-PadConfiguration (
- BEAGLEBOARD_REVISION Revision
- );
-
-VOID
-ClockInit (
- VOID
- );
-
-/**
- Detect board revision
-
- @return Board revision
-**/
-BEAGLEBOARD_REVISION
-BeagleBoardGetRevision (
- VOID
- )
-{
- UINT32 OldPinDir;
- UINT32 Revision;
-
- // Read GPIO 171, 172, 173
- OldPinDir = MmioRead32 (GPIO6_BASE + GPIO_OE);
- MmioWrite32(GPIO6_BASE + GPIO_OE, (OldPinDir | BIT11 | BIT12 | BIT13));
- Revision = MmioRead32 (GPIO6_BASE + GPIO_DATAIN);
-
- // Restore I/O settings
- MmioWrite32 (GPIO6_BASE + GPIO_OE, OldPinDir);
-
- return (BEAGLEBOARD_REVISION)((Revision >> 11) & 0x7);
-}
-
-/**
- Return the current Boot Mode
-
- This function returns the boot reason on the platform
-
-**/
-EFI_BOOT_MODE
-ArmPlatformGetBootMode (
- VOID
- )
-{
- return BOOT_WITH_FULL_CONFIGURATION;
-}
-
-/**
- Initialize controllers that must setup at the early stage
-
- Some peripherals must be initialized in Secure World.
- For example, some L2x0 requires to be initialized in Secure World
-
-**/
-RETURN_STATUS
-ArmPlatformInitialize (
- IN UINTN MpId
- )
-{
- BEAGLEBOARD_REVISION Revision;
-
- Revision = BeagleBoardGetRevision();
-
- // Set up Pin muxing.
- PadConfiguration (Revision);
-
- // Set up system clocking
- ClockInit ();
-
- // Turn off the functional clock for Timer 3
- MmioAnd32 (CM_FCLKEN_PER, 0xFFFFFFFF ^ CM_ICLKEN_PER_EN_GPT3_ENABLE );
- ArmDataSyncronizationBarrier ();
-
- // Clear IRQs
- MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
- ArmDataSyncronizationBarrier ();
-
- return RETURN_SUCCESS;
-}
-
-/**
- Initialize the system (or sometimes called permanent) memory
-
- This memory is generally represented by the DRAM.
-
-**/
-VOID
-ArmPlatformInitializeSystemMemory (
- VOID
- )
-{
- // We do not need to initialize the System Memory on RTSM
-}
-
-VOID
-ArmPlatformGetPlatformPpiList (
- OUT UINTN *PpiListSize,
- OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
- )
-{
- *PpiListSize = 0;
- *PpiList = NULL;
-}
-
-UINTN
-ArmPlatformGetCorePosition (
- IN UINTN MpId
- )
-{
- return 1;
-}
-
diff --git a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardHelper.S b/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardHelper.S deleted file mode 100644 index f157925464..0000000000 --- a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardHelper.S +++ /dev/null @@ -1,47 +0,0 @@ -#
-# Copyright (c) 2012-2013, ARM Limited. All rights reserved.
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-
-#include <AsmMacroIoLib.h>
-#include <AutoGen.h>
-
-.text
-.align 2
-
-GCC_ASM_EXPORT(ArmPlatformIsPrimaryCore)
-GCC_ASM_EXPORT(ArmPlatformGetPrimaryCoreMpId)
-GCC_ASM_EXPORT(ArmPlatformPeiBootAction)
-
-GCC_ASM_IMPORT(ArmReadMpidr)
-
-//UINTN
-//ArmPlatformIsPrimaryCore (
-// IN UINTN MpId
-// );
-ASM_PFX(ArmPlatformIsPrimaryCore):
- // BeagleBoard has a single core. We must always return 1.
- mov r0, #1
- bx lr
-
-ASM_PFX(ArmPlatformPeiBootAction):
- bx lr
-
-//UINTN
-//ArmPlatformGetPrimaryCoreMpId (
-// VOID
-// );
-ASM_PFX(ArmPlatformGetPrimaryCoreMpId):
- // The BeagleBoard is a uniprocessor platform. The MPIDR of primary core is
- // always the MPIDR of the calling CPU.
- b ASM_PFX(ArmReadMpidr)
-
-ASM_FUNCTION_REMOVE_IF_UNREFERENCED
diff --git a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardHelper.asm b/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardHelper.asm deleted file mode 100644 index 86906c87bc..0000000000 --- a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardHelper.asm +++ /dev/null @@ -1,53 +0,0 @@ -//
-// Copyright (c) 2012-2013, ARM Limited. All rights reserved.
-//
-// This program and the accompanying materials
-// are licensed and made available under the terms and conditions of the BSD License
-// which accompanies this distribution. The full text of the license may be found at
-// http://opensource.org/licenses/bsd-license.php
-//
-// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//
-//
-
-#include <AsmMacroIoLib.h>
-#include <Base.h>
-
-#include <AutoGen.h>
-
- INCLUDE AsmMacroIoLib.inc
-
- EXPORT ArmPlatformPeiBootAction
- EXPORT ArmPlatformIsPrimaryCore
- EXPORT ArmPlatformGetPrimaryCoreMpId
-
- IMPORT ArmReadMpidr
-
- AREA BeagleBoardHelper, CODE, READONLY
-
-//UINTN
-//ArmPlatformIsPrimaryCore (
-// IN UINTN MpId
-// );
-ArmPlatformIsPrimaryCore FUNCTION
- // BeagleBoard has a single core. We must always return 1.
- mov r0, #1
- bx lr
- ENDFUNC
-
-ArmPlatformPeiBootAction FUNCTION
- bx lr
- ENDFUNC
-
-//UINTN
-//ArmPlatformGetPrimaryCoreMpId (
-// VOID
-// );
-ArmPlatformGetPrimaryCoreMpId FUNCTION
- // The BeagleBoard is a uniprocessor platform. The MPIDR of primary core is
- // always the MPIDR of the calling CPU.
- b ArmReadMpidr
- ENDFUNC
-
- END
diff --git a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardLib.inf b/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardLib.inf deleted file mode 100755 index b1139a477d..0000000000 --- a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardLib.inf +++ /dev/null @@ -1,54 +0,0 @@ -#/* @file
-# Copyright (c) 2011-2013, ARM Limited. All rights reserved.
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#*/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = BeagleBoardLib
- FILE_GUID = 736343a0-1d96-11e0-aaaa-0002a5d5c51b
- MODULE_TYPE = BASE
- VERSION_STRING = 1.0
- LIBRARY_CLASS = ArmPlatformLib
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
- ArmPkg/ArmPkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
- Omap35xxPkg/Omap35xxPkg.dec
- BeagleBoardPkg/BeagleBoardPkg.dec
-
-[LibraryClasses]
- IoLib
- ArmLib
- MemoryAllocationLib
-
-[Sources.common]
- BeagleBoardHelper.asm | RVCT
- BeagleBoardHelper.S | GCC
- BeagleBoard.c
- BeagleBoardMem.c
- PadConfiguration.c
- Clock.c
- BeagleBoardHelper.S | GCC
- BeagleBoardHelper.asm | RVCT
-
-[FeaturePcd]
- gEmbeddedTokenSpaceGuid.PcdCacheEnable
-
-[FixedPcd]
- gArmTokenSpaceGuid.PcdFdBaseAddress
- gArmTokenSpaceGuid.PcdFdSize
-
- gArmTokenSpaceGuid.PcdSystemMemoryBase
- gArmTokenSpaceGuid.PcdSystemMemorySize
diff --git a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardMem.c b/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardMem.c deleted file mode 100755 index b77b069930..0000000000 --- a/BeagleBoardPkg/Library/BeagleBoardLib/BeagleBoardMem.c +++ /dev/null @@ -1,84 +0,0 @@ -/** @file
-*
-* Copyright (c) 2011, ARM Limited. All rights reserved.
-*
-* This program and the accompanying materials
-* are licensed and made available under the terms and conditions of the BSD License
-* which accompanies this distribution. The full text of the license may be found at
-* http://opensource.org/licenses/bsd-license.php
-*
-* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/
-
-#include <Library/ArmPlatformLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/IoLib.h>
-
-#include <BeagleBoard.h>
-
-#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 4
-
-/**
- Return the Virtual Memory Map of your platform
-
- This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU on your platform.
-
- @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR describing a Physical-to-
- Virtual Memory mapping. This array must be ended by a zero-filled
- entry
-
-**/
-VOID
-ArmPlatformGetVirtualMemoryMap (
- IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap
- )
-{
- ARM_MEMORY_REGION_ATTRIBUTES CacheAttributes;
- UINTN Index = 0;
- ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable;
-
- ASSERT(VirtualMemoryMap != NULL);
-
- VirtualMemoryTable = (ARM_MEMORY_REGION_DESCRIPTOR*)AllocatePages(EFI_SIZE_TO_PAGES (sizeof(ARM_MEMORY_REGION_DESCRIPTOR) * MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS));
- if (VirtualMemoryTable == NULL) {
- return;
- }
-
- if (FeaturePcdGet(PcdCacheEnable) == TRUE) {
- CacheAttributes = DDR_ATTRIBUTES_CACHED;
- } else {
- CacheAttributes = DDR_ATTRIBUTES_UNCACHED;
- }
-
- // ReMap (Either NOR Flash or DRAM)
- VirtualMemoryTable[Index].PhysicalBase = PcdGet64 (PcdSystemMemoryBase);
- VirtualMemoryTable[Index].VirtualBase = PcdGet64 (PcdSystemMemoryBase);
- VirtualMemoryTable[Index].Length = PcdGet64 (PcdSystemMemorySize);
- VirtualMemoryTable[Index].Attributes = CacheAttributes;
-
- // SOC Registers. L3 interconnects
- VirtualMemoryTable[++Index].PhysicalBase = SOC_REGISTERS_L3_PHYSICAL_BASE;
- VirtualMemoryTable[Index].VirtualBase = SOC_REGISTERS_L3_PHYSICAL_BASE;
- VirtualMemoryTable[Index].Length = SOC_REGISTERS_L3_PHYSICAL_LENGTH;
- VirtualMemoryTable[Index].Attributes = SOC_REGISTERS_L3_ATTRIBUTES;
-
- // SOC Registers. L4 interconnects
- VirtualMemoryTable[++Index].PhysicalBase = SOC_REGISTERS_L4_PHYSICAL_BASE;
- VirtualMemoryTable[Index].VirtualBase = SOC_REGISTERS_L4_PHYSICAL_BASE;
- VirtualMemoryTable[Index].Length = SOC_REGISTERS_L4_PHYSICAL_LENGTH;
- VirtualMemoryTable[Index].Attributes = SOC_REGISTERS_L4_ATTRIBUTES;
-
- // End of Table
- VirtualMemoryTable[++Index].PhysicalBase = 0;
- VirtualMemoryTable[Index].VirtualBase = 0;
- VirtualMemoryTable[Index].Length = 0;
- VirtualMemoryTable[Index].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0;
-
- ASSERT((Index + 1) == MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS);
-
- *VirtualMemoryMap = VirtualMemoryTable;
-}
diff --git a/BeagleBoardPkg/Library/BeagleBoardLib/Clock.c b/BeagleBoardPkg/Library/BeagleBoardLib/Clock.c deleted file mode 100755 index 6ca48e0c9f..0000000000 --- a/BeagleBoardPkg/Library/BeagleBoardLib/Clock.c +++ /dev/null @@ -1,69 +0,0 @@ -/** @file
-
- Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include <Library/IoLib.h>
-#include <Library/DebugLib.h>
-
-#include <Omap3530/Omap3530.h>
-
-VOID
-ClockInit (
- VOID
- )
-{
- //DPLL1 - DPLL4 are configured part of Configuration header which OMAP3 ROM parses.
-
- // Enable PLL5 and set to 120 MHz as a reference clock.
- MmioWrite32 (CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13));
- MmioWrite32 (CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1));
- MmioWrite32 (CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE);
-
- // Turn on functional & interface clocks to the USBHOST power domain
- MmioOr32(CM_FCLKEN_USBHOST, CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE
- | CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE);
- MmioOr32(CM_ICLKEN_USBHOST, CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE);
-
- // Turn on functional & interface clocks to the USBTLL block.
- MmioOr32(CM_FCLKEN3_CORE, CM_FCLKEN3_CORE_EN_USBTLL_ENABLE);
- MmioOr32(CM_ICLKEN3_CORE, CM_ICLKEN3_CORE_EN_USBTLL_ENABLE);
-
- // Turn on functional & interface clocks to MMC1 and I2C1 modules.
- MmioOr32(CM_FCLKEN1_CORE, CM_FCLKEN1_CORE_EN_MMC1_ENABLE
- | CM_FCLKEN1_CORE_EN_I2C1_ENABLE);
- MmioOr32(CM_ICLKEN1_CORE, CM_ICLKEN1_CORE_EN_MMC1_ENABLE
- | CM_ICLKEN1_CORE_EN_I2C1_ENABLE);
-
- // Turn on functional & interface clocks to various Peripherals.
- MmioOr32(CM_FCLKEN_PER, CM_FCLKEN_PER_EN_UART3_ENABLE
- | CM_FCLKEN_PER_EN_GPT4_ENABLE
- | CM_FCLKEN_PER_EN_GPIO2_ENABLE
- | CM_FCLKEN_PER_EN_GPIO3_ENABLE
- | CM_FCLKEN_PER_EN_GPIO4_ENABLE
- | CM_FCLKEN_PER_EN_GPIO5_ENABLE
- | CM_FCLKEN_PER_EN_GPIO6_ENABLE);
- MmioOr32(CM_ICLKEN_PER, CM_ICLKEN_PER_EN_UART3_ENABLE
- | CM_ICLKEN_PER_EN_GPT3_ENABLE
- | CM_ICLKEN_PER_EN_GPT4_ENABLE
- | CM_ICLKEN_PER_EN_GPIO2_ENABLE
- | CM_ICLKEN_PER_EN_GPIO3_ENABLE
- | CM_ICLKEN_PER_EN_GPIO4_ENABLE
- | CM_ICLKEN_PER_EN_GPIO5_ENABLE
- | CM_ICLKEN_PER_EN_GPIO6_ENABLE);
-
- // Turn on functional & inteface clocks to various wakeup modules.
- MmioOr32(CM_FCLKEN_WKUP, CM_FCLKEN_WKUP_EN_GPIO1_ENABLE
- | CM_FCLKEN_WKUP_EN_WDT2_ENABLE);
- MmioOr32(CM_ICLKEN_WKUP, CM_ICLKEN_WKUP_EN_GPIO1_ENABLE
- | CM_ICLKEN_WKUP_EN_WDT2_ENABLE);
-}
diff --git a/BeagleBoardPkg/Library/BeagleBoardLib/PadConfiguration.c b/BeagleBoardPkg/Library/BeagleBoardLib/PadConfiguration.c deleted file mode 100755 index e6f7cc55ff..0000000000 --- a/BeagleBoardPkg/Library/BeagleBoardLib/PadConfiguration.c +++ /dev/null @@ -1,322 +0,0 @@ -/** @file
-
- Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include <PiPei.h>
-#include <Library/IoLib.h>
-#include <Library/DebugLib.h>
-#include <Omap3530/Omap3530.h>
-#include <BeagleBoard.h>
-
-#define NUM_PINS_SHARED 232
-#define NUM_PINS_ABC 6
-#define NUM_PINS_XM 12
-
-PAD_CONFIGURATION PadConfigurationTableShared[] = {
- //Pin, MuxMode, PullConfig, InputEnable
- { SDRC_D0, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D1, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D2, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D3, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D4, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D5, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D6, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D7, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D8, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D9, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D10, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D11, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D12, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D13, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D14, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D15, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D16, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D17, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D18, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D19, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D20, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D21, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D22, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D23, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D24, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D25, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D26, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D27, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D28, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D29, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D30, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_D31, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_CLK, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_DQS0, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_CKE0, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { SDRC_CKE1, MUXMODE7, PULL_DISABLED, INPUT },
- { SDRC_DQS1, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_DQS2, MUXMODE0, PULL_DISABLED, INPUT },
- { SDRC_DQS3, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_A1, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A2, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A3, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A4, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A5, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A6, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A7, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A8, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A9, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_A10, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_D0, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D1, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D2, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D3, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D4, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D5, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D6, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D7, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D8, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D9, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D10, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D11, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D12, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D13, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D14, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_D15, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_NCS0, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_NCS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT },
- { GPMC_NCS2, MUXMODE0, PULL_UP_SELECTED, OUTPUT },
- { GPMC_NCS3, MUXMODE0, PULL_UP_SELECTED, OUTPUT },
- { GPMC_NCS4, MUXMODE0, PULL_UP_SELECTED, OUTPUT },
- { GPMC_NCS5, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_NCS6, MUXMODE1, PULL_DISABLED, INPUT },
- { GPMC_NCS7, MUXMODE1, PULL_UP_SELECTED, INPUT },
- { GPMC_CLK, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_NADV_ALE, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_NOE, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_NWE, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_NBE0_CLE, MUXMODE0, PULL_DISABLED, OUTPUT },
- { GPMC_NBE1, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_NWP, MUXMODE0, PULL_DISABLED, INPUT },
- { GPMC_WAIT0, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { GPMC_WAIT1, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { GPMC_WAIT2, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { GPMC_WAIT3, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { DSS_PCLK, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_HSYNC, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_PSYNC, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_ACBIAS, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA0, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA1, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA2, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA3, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA4, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA5, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA6, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA7, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA8, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA9, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA10, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA11, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA12, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA13, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA14, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA15, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA16, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA17, MUXMODE0, PULL_DISABLED, OUTPUT },
- { CAM_HS, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { CAM_VS, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { CAM_XCLKA, MUXMODE0, PULL_DISABLED, OUTPUT },
- { CAM_PCLK, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { CAM_FLD, MUXMODE4, PULL_DISABLED, OUTPUT },
- { CAM_D0, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D1, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D2, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D3, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D4, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D5, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D6, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D7, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D8, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D9, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D10, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_D11, MUXMODE0, PULL_DISABLED, INPUT },
- { CAM_XCLKB, MUXMODE0, PULL_DISABLED, OUTPUT },
- { CAM_WEN, MUXMODE4, PULL_DISABLED, INPUT },
- { CAM_STROBE, MUXMODE0, PULL_DISABLED, OUTPUT },
- { CSI2_DX0, MUXMODE0, PULL_DISABLED, INPUT },
- { CSI2_DY0, MUXMODE0, PULL_DISABLED, INPUT },
- { CSI2_DX1, MUXMODE0, PULL_DISABLED, INPUT },
- { CSI2_DY1, MUXMODE0, PULL_DISABLED, INPUT },
- { MCBSP2_FSX, MUXMODE0, PULL_DISABLED, INPUT },
- { MCBSP2_CLKX, MUXMODE0, PULL_DISABLED, INPUT },
- { MCBSP2_DR, MUXMODE0, PULL_DISABLED, INPUT },
- { MCBSP2_DX, MUXMODE0, PULL_DISABLED, OUTPUT },
- { MMC1_CLK, MUXMODE0, PULL_UP_SELECTED, OUTPUT },
- { MMC1_CMD, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT0, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT1, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT2, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT3, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT4, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT5, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT6, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC1_DAT7, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MMC2_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_CMD, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT0, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT1, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT2, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT3, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT4, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT5, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT6, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MMC2_DAT7, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MCBSP3_DX, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCBSP3_DR, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCBSP3_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCBSP3_FSX, MUXMODE4, PULL_DISABLED, OUTPUT },
- { UART2_CTS, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { UART2_RTS, MUXMODE0, PULL_DISABLED, OUTPUT },
- { UART2_TX, MUXMODE0, PULL_DISABLED, OUTPUT },
- { UART2_RX, MUXMODE4, PULL_DISABLED, OUTPUT },
- { UART1_TX, MUXMODE0, PULL_DISABLED, OUTPUT },
- { UART1_RTS, MUXMODE4, PULL_DISABLED, OUTPUT },
- { UART1_CTS, MUXMODE4, PULL_DISABLED, OUTPUT },
- { UART1_RX, MUXMODE0, PULL_DISABLED, INPUT },
- { MCBSP4_CLKX, MUXMODE1, PULL_DISABLED, INPUT },
- { MCBSP4_DR, MUXMODE1, PULL_DISABLED, INPUT },
- { MCBSP4_DX, MUXMODE1, PULL_DISABLED, INPUT },
- { MCBSP4_FSX, MUXMODE1, PULL_DISABLED, INPUT },
- { MCBSP1_CLKR, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCBSP1_FSR, MUXMODE4, PULL_UP_SELECTED, OUTPUT },
- { MCBSP1_DX, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCBSP1_DR, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCBSP1_CLKS, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MCBSP1_FSX, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCBSP1_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT },
- { UART3_CTS_RCTX,MUXMODE0, PULL_UP_SELECTED, INPUT },
- { UART3_RTS_SD, MUXMODE0, PULL_DISABLED, OUTPUT },
- { UART3_RX_IRRX, MUXMODE0, PULL_DISABLED, INPUT },
- { UART3_TX_IRTX, MUXMODE0, PULL_DISABLED, OUTPUT },
- { HSUSB0_CLK, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_STP, MUXMODE0, PULL_UP_SELECTED, OUTPUT },
- { HSUSB0_DIR, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_NXT, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA0, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA1, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA2, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA3, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA4, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA5, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA6, MUXMODE0, PULL_DISABLED, INPUT },
- { HSUSB0_DATA7, MUXMODE0, PULL_DISABLED, INPUT },
- { I2C1_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { I2C1_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { I2C2_SCL, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { I2C2_SDA, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { I2C3_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { I2C3_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { HDQ_SIO, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCSPI1_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MCSPI1_SIMO, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { MCSPI1_SOMI, MUXMODE0, PULL_DISABLED, INPUT },
- { MCSPI1_CS0, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { MCSPI1_CS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT },
- { MCSPI1_CS2, MUXMODE4, PULL_DISABLED, OUTPUT },
- { MCSPI1_CS3, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { MCSPI2_CLK, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { MCSPI2_SIMO, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { MCSPI2_SOMI, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { MCSPI2_CS0, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { MCSPI2_CS1, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { SYS_NIRQ, MUXMODE0, PULL_UP_SELECTED, INPUT },
- { SYS_CLKOUT2, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { ETK_CLK, MUXMODE3, PULL_UP_SELECTED, OUTPUT },
- { ETK_CTL, MUXMODE3, PULL_UP_SELECTED, OUTPUT },
- { ETK_D0, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D1, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D2, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D3, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D4, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D5, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D6, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D7, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D8, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D9, MUXMODE4, PULL_UP_SELECTED, INPUT },
- { ETK_D10, MUXMODE3, PULL_UP_SELECTED, OUTPUT },
- { ETK_D11, MUXMODE3, PULL_UP_SELECTED, OUTPUT },
- { ETK_D12, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D13, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D14, MUXMODE3, PULL_UP_SELECTED, INPUT },
- { ETK_D15, MUXMODE3, PULL_UP_SELECTED, INPUT }
-};
-
-PAD_CONFIGURATION PadConfigurationTableAbc[] = {
- { DSS_DATA18, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA19, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA20, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA21, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA22, MUXMODE0, PULL_DISABLED, OUTPUT },
- { DSS_DATA23, MUXMODE0, PULL_DISABLED, OUTPUT }
-};
-
-PAD_CONFIGURATION PadConfigurationTableXm[] = {
- { DSS_DATA18, MUXMODE3, PULL_DISABLED, OUTPUT },
- { DSS_DATA19, MUXMODE3, PULL_DISABLED, OUTPUT },
- { DSS_DATA20, MUXMODE3, PULL_DISABLED, OUTPUT },
- { DSS_DATA21, MUXMODE3, PULL_DISABLED, OUTPUT },
- { DSS_DATA22, MUXMODE3, PULL_DISABLED, OUTPUT },
- { DSS_DATA23, MUXMODE3, PULL_DISABLED, OUTPUT },
- { SYS_BOOT0, MUXMODE3, PULL_DISABLED, OUTPUT },
- { SYS_BOOT1, MUXMODE3, PULL_DISABLED, OUTPUT },
- { SYS_BOOT3, MUXMODE3, PULL_DISABLED, OUTPUT },
- { SYS_BOOT4, MUXMODE3, PULL_DISABLED, OUTPUT },
- { SYS_BOOT5, MUXMODE3, PULL_DISABLED, OUTPUT },
- { SYS_BOOT6, MUXMODE3, PULL_DISABLED, OUTPUT }
-};
-
-VOID
-PadConfiguration (
- BEAGLEBOARD_REVISION Revision
- )
-{
- UINTN Index;
- UINT16 PadConfiguration;
- PAD_CONFIGURATION *BoardConfiguration;
- UINTN NumPinsToConfigure;
-
- for (Index = 0; Index < NUM_PINS_SHARED; Index++) {
- // Set up Pad configuration for particular pin.
- PadConfiguration = (PadConfigurationTableShared[Index].MuxMode << MUXMODE_OFFSET);
- PadConfiguration |= (PadConfigurationTableShared[Index].PullConfig << PULL_CONFIG_OFFSET);
- PadConfiguration |= (PadConfigurationTableShared[Index].InputEnable << INPUTENABLE_OFFSET);
-
- // Configure the pin with specific Pad configuration.
- MmioWrite16(PadConfigurationTableShared[Index].Pin, PadConfiguration);
- }
-
- if (Revision == REVISION_XM) {
- BoardConfiguration = PadConfigurationTableXm;
- NumPinsToConfigure = NUM_PINS_XM;
- } else {
- BoardConfiguration = PadConfigurationTableAbc;
- NumPinsToConfigure = NUM_PINS_ABC;
- }
-
- for (Index = 0; Index < NumPinsToConfigure; Index++) {
- //Set up Pad configuration for particular pin.
- PadConfiguration = (BoardConfiguration[Index].MuxMode << MUXMODE_OFFSET);
- PadConfiguration |= (BoardConfiguration[Index].PullConfig << PULL_CONFIG_OFFSET);
- PadConfiguration |= (BoardConfiguration[Index].InputEnable << INPUTENABLE_OFFSET);
-
- //Configure the pin with specific Pad configuration.
- MmioWrite16(BoardConfiguration[Index].Pin, PadConfiguration);
- }
-}
|