diff options
Diffstat (limited to 'Core/UefiCpuPkg/CpuMpPei/PeiMpServices.c')
| -rw-r--r-- | Core/UefiCpuPkg/CpuMpPei/PeiMpServices.c | 956 |
1 files changed, 956 insertions, 0 deletions
diff --git a/Core/UefiCpuPkg/CpuMpPei/PeiMpServices.c b/Core/UefiCpuPkg/CpuMpPei/PeiMpServices.c new file mode 100644 index 0000000000..e784377d67 --- /dev/null +++ b/Core/UefiCpuPkg/CpuMpPei/PeiMpServices.c @@ -0,0 +1,956 @@ +/** @file
+ Implementation of Multiple Processor PPI services.
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "PeiMpServices.h"
+
+//
+// CPU MP PPI to be installed
+//
+EFI_PEI_MP_SERVICES_PPI mMpServicesPpi = {
+ PeiGetNumberOfProcessors,
+ PeiGetProcessorInfo,
+ PeiStartupAllAPs,
+ PeiStartupThisAP,
+ PeiSwitchBSP,
+ PeiEnableDisableAP,
+ PeiWhoAmI,
+};
+
+EFI_PEI_PPI_DESCRIPTOR mPeiCpuMpPpiDesc = {
+ (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEfiPeiMpServicesPpiGuid,
+ &mMpServicesPpi
+};
+
+/**
+ Get CPU Package/Core/Thread location information.
+
+ @param InitialApicId CPU APIC ID
+ @param Location Pointer to CPU location information
+**/
+VOID
+ExtractProcessorLocation (
+ IN UINT32 InitialApicId,
+ OUT EFI_CPU_PHYSICAL_LOCATION *Location
+ )
+{
+ BOOLEAN TopologyLeafSupported;
+ UINTN ThreadBits;
+ UINTN CoreBits;
+ UINT32 RegEax;
+ UINT32 RegEbx;
+ UINT32 RegEcx;
+ UINT32 RegEdx;
+ UINT32 MaxCpuIdIndex;
+ UINT32 SubIndex;
+ UINTN LevelType;
+ UINT32 MaxLogicProcessorsPerPackage;
+ UINT32 MaxCoresPerPackage;
+
+ //
+ // Check if the processor is capable of supporting more than one logical processor.
+ //
+ AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &RegEdx);
+ if ((RegEdx & BIT28) == 0) {
+ Location->Thread = 0;
+ Location->Core = 0;
+ Location->Package = 0;
+ return;
+ }
+
+ ThreadBits = 0;
+ CoreBits = 0;
+
+ //
+ // Assume three-level mapping of APIC ID: Package:Core:SMT.
+ //
+
+ TopologyLeafSupported = FALSE;
+ //
+ // Get the max index of basic CPUID
+ //
+ AsmCpuid (CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
+
+ //
+ // If the extended topology enumeration leaf is available, it
+ // is the preferred mechanism for enumerating topology.
+ //
+ if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
+ AsmCpuidEx (CPUID_EXTENDED_TOPOLOGY, 0, &RegEax, &RegEbx, &RegEcx, NULL);
+ //
+ // If CPUID.(EAX=0BH, ECX=0H):EBX returns zero and maximum input value for
+ // basic CPUID information is greater than 0BH, then CPUID.0BH leaf is not
+ // supported on that processor.
+ //
+ if (RegEbx != 0) {
+ TopologyLeafSupported = TRUE;
+
+ //
+ // Sub-leaf index 0 (ECX= 0 as input) provides enumeration parameters to extract
+ // the SMT sub-field of x2APIC ID.
+ //
+ LevelType = (RegEcx >> 8) & 0xff;
+ ASSERT (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_SMT);
+ ThreadBits = RegEax & 0x1f;
+
+ //
+ // Software must not assume any "level type" encoding
+ // value to be related to any sub-leaf index, except sub-leaf 0.
+ //
+ SubIndex = 1;
+ do {
+ AsmCpuidEx (CPUID_EXTENDED_TOPOLOGY, SubIndex, &RegEax, NULL, &RegEcx, NULL);
+ LevelType = (RegEcx >> 8) & 0xff;
+ if (LevelType == CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_CORE) {
+ CoreBits = (RegEax & 0x1f) - ThreadBits;
+ break;
+ }
+ SubIndex++;
+ } while (LevelType != CPUID_EXTENDED_TOPOLOGY_LEVEL_TYPE_INVALID);
+ }
+ }
+
+ if (!TopologyLeafSupported) {
+ AsmCpuid (CPUID_VERSION_INFO, NULL, &RegEbx, NULL, NULL);
+ MaxLogicProcessorsPerPackage = (RegEbx >> 16) & 0xff;
+ if (MaxCpuIdIndex >= CPUID_CACHE_PARAMS) {
+ AsmCpuidEx (CPUID_CACHE_PARAMS, 0, &RegEax, NULL, NULL, NULL);
+ MaxCoresPerPackage = (RegEax >> 26) + 1;
+ } else {
+ //
+ // Must be a single-core processor.
+ //
+ MaxCoresPerPackage = 1;
+ }
+
+ ThreadBits = (UINTN) (HighBitSet32 (MaxLogicProcessorsPerPackage / MaxCoresPerPackage - 1) + 1);
+ CoreBits = (UINTN) (HighBitSet32 (MaxCoresPerPackage - 1) + 1);
+ }
+
+ Location->Thread = InitialApicId & ~((-1) << ThreadBits);
+ Location->Core = (InitialApicId >> ThreadBits) & ~((-1) << CoreBits);
+ Location->Package = (InitialApicId >> (ThreadBits + CoreBits));
+}
+
+/**
+ Find the current Processor number by APIC ID.
+
+ @param PeiCpuMpData Pointer to PEI CPU MP Data
+ @param ProcessorNumber Return the pocessor number found
+
+ @retval EFI_SUCCESS ProcessorNumber is found and returned.
+ @retval EFI_NOT_FOUND ProcessorNumber is not found.
+**/
+EFI_STATUS
+GetProcessorNumber (
+ IN PEI_CPU_MP_DATA *PeiCpuMpData,
+ OUT UINTN *ProcessorNumber
+ )
+{
+ UINTN TotalProcessorNumber;
+ UINTN Index;
+
+ TotalProcessorNumber = PeiCpuMpData->CpuCount;
+ for (Index = 0; Index < TotalProcessorNumber; Index ++) {
+ if (PeiCpuMpData->CpuData[Index].ApicId == GetInitialApicId ()) {
+ *ProcessorNumber = Index;
+ return EFI_SUCCESS;
+ }
+ }
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Worker function for SwitchBSP().
+
+ Worker function for SwitchBSP(), assigned to the AP which is intended to become BSP.
+
+ @param Buffer Pointer to CPU MP Data
+**/
+VOID
+EFIAPI
+FutureBSPProc (
+ IN VOID *Buffer
+ )
+{
+ PEI_CPU_MP_DATA *DataInHob;
+
+ DataInHob = (PEI_CPU_MP_DATA *) Buffer;
+ AsmExchangeRole (&DataInHob->APInfo, &DataInHob->BSPInfo);
+}
+
+/**
+ This service retrieves the number of logical processor in the platform
+ and the number of those logical processors that are enabled on this boot.
+ This service may only be called from the BSP.
+
+ This function is used to retrieve the following information:
+ - The number of logical processors that are present in the system.
+ - The number of enabled logical processors in the system at the instant
+ this call is made.
+
+ Because MP Service Ppi provides services to enable and disable processors
+ dynamically, the number of enabled logical processors may vary during the
+ course of a boot session.
+
+ If this service is called from an AP, then EFI_DEVICE_ERROR is returned.
+ If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then
+ EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors
+ is returned in NumberOfProcessors, the number of currently enabled processor
+ is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.
+
+ @param[in] PeiServices An indirect pointer to the PEI Services Table
+ published by the PEI Foundation.
+ @param[in] This Pointer to this instance of the PPI.
+ @param[out] NumberOfProcessors Pointer to the total number of logical processors in
+ the system, including the BSP and disabled APs.
+ @param[out] NumberOfEnabledProcessors
+ Number of processors in the system that are enabled.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.
+ NumberOfEnabledProcessors is NULL.
+**/
+EFI_STATUS
+EFIAPI
+PeiGetNumberOfProcessors (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ OUT UINTN *NumberOfProcessors,
+ OUT UINTN *NumberOfEnabledProcessors
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+ UINTN CallerNumber;
+ UINTN ProcessorNumber;
+ UINTN EnabledProcessorNumber;
+ UINTN Index;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ PeiWhoAmI (PeiServices, This, &CallerNumber);
+ if (CallerNumber != PeiCpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ ProcessorNumber = PeiCpuMpData->CpuCount;
+ EnabledProcessorNumber = 0;
+ for (Index = 0; Index < ProcessorNumber; Index++) {
+ if (PeiCpuMpData->CpuData[Index].State != CpuStateDisabled) {
+ EnabledProcessorNumber ++;
+ }
+ }
+
+ *NumberOfProcessors = ProcessorNumber;
+ *NumberOfEnabledProcessors = EnabledProcessorNumber;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Gets detailed MP-related information on the requested processor at the
+ instant this call is made. This service may only be called from the BSP.
+
+ This service retrieves detailed MP-related information about any processor
+ on the platform. Note the following:
+ - The processor information may change during the course of a boot session.
+ - The information presented here is entirely MP related.
+
+ Information regarding the number of caches and their sizes, frequency of operation,
+ slot numbers is all considered platform-related information and is not provided
+ by this service.
+
+ @param[in] PeiServices An indirect pointer to the PEI Services Table
+ published by the PEI Foundation.
+ @param[in] This Pointer to this instance of the PPI.
+ @param[in] ProcessorNumber Pointer to the total number of logical processors in
+ the system, including the BSP and disabled APs.
+ @param[out] ProcessorInfoBuffer Number of processors in the system that are enabled.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the platform.
+**/
+EFI_STATUS
+EFIAPI
+PeiGetProcessorInfo (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+ UINTN CallerNumber;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ PeiWhoAmI (PeiServices, This, &CallerNumber);
+ if (CallerNumber != PeiCpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (ProcessorInfoBuffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (ProcessorNumber >= PeiCpuMpData->CpuCount) {
+ return EFI_NOT_FOUND;
+ }
+
+ ProcessorInfoBuffer->ProcessorId = (UINT64) PeiCpuMpData->CpuData[ProcessorNumber].ApicId;
+ ProcessorInfoBuffer->StatusFlag = 0;
+ if (PeiCpuMpData->CpuData[ProcessorNumber].ApicId == GetInitialApicId()) {
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_AS_BSP_BIT;
+ }
+ if (PeiCpuMpData->CpuData[ProcessorNumber].CpuHealthy) {
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_HEALTH_STATUS_BIT;
+ }
+ if (PeiCpuMpData->CpuData[ProcessorNumber].State == CpuStateDisabled) {
+ ProcessorInfoBuffer->StatusFlag &= ~PROCESSOR_ENABLED_BIT;
+ } else {
+ ProcessorInfoBuffer->StatusFlag |= PROCESSOR_ENABLED_BIT;
+ }
+
+ //
+ // Get processor location information
+ //
+ ExtractProcessorLocation (PeiCpuMpData->CpuData[ProcessorNumber].ApicId, &ProcessorInfoBuffer->Location);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This service executes a caller provided function on all enabled APs. APs can
+ run either simultaneously or one at a time in sequence. This service supports
+ both blocking requests only. This service may only
+ be called from the BSP.
+
+ This function is used to dispatch all the enabled APs to the function specified
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
+ immediately and Procedure is not started on any AP.
+
+ If SingleThread is TRUE, all the enabled APs execute the function specified by
+ Procedure one by one, in ascending order of processor handle number. Otherwise,
+ all the enabled APs execute the function specified by Procedure simultaneously.
+
+ If the timeout specified by TimeoutInMicroSeconds expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs
+ are always available for further calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()
+ and EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If FailedCpuList is not NULL, its
+ content points to the list of processor handle numbers in which Procedure was
+ terminated.
+
+ Note: It is the responsibility of the consumer of the EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()
+ to make sure that the nature of the code that is executed on the BSP and the
+ dispatched APs is well controlled. The MP Services Ppi does not guarantee
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in
+ parallel are limited to certain independent tasks and well-controlled exclusive
+ code. PEI services and Ppis may not be called by APs unless otherwise
+ specified.
+
+ In blocking execution mode, BSP waits until all APs finish or
+ TimeoutInMicroSeconds expires.
+
+ @param[in] PeiServices An indirect pointer to the PEI Services Table
+ published by the PEI Foundation.
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] Procedure A pointer to the function to be run on enabled APs of
+ the system.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute the function
+ specified by Procedure one by one, in ascending order
+ of processor handle number. If FALSE, then all the
+ enabled APs execute the function specified by Procedure
+ simultaneously.
+ @param[in] TimeoutInMicroSeconds
+ Indicates the time limit in microseconds for APs to
+ return from Procedure, for blocking mode only. Zero
+ means infinity. If the timeout expires before all APs
+ return from Procedure, then Procedure on the failed APs
+ is terminated. All enabled APs are available for next
+ function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()
+ or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the
+ timeout expires in blocking mode, BSP returns
+ EFI_TIMEOUT.
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before the
+ timeout expired.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before all
+ enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+**/
+EFI_STATUS
+EFIAPI
+PeiStartupAllAPs (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN UINTN TimeoutInMicroSeconds,
+ IN VOID *ProcedureArgument OPTIONAL
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+ UINTN ProcessorNumber;
+ UINTN Index;
+ UINTN CallerNumber;
+ BOOLEAN HasEnabledAp;
+ BOOLEAN HasEnabledIdleAp;
+ volatile UINT32 *FinishedCount;
+ EFI_STATUS Status;
+ UINTN WaitCountIndex;
+ UINTN WaitCountNumber;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (Procedure == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ PeiWhoAmI (PeiServices, This, &CallerNumber);
+ if (CallerNumber != PeiCpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ ProcessorNumber = PeiCpuMpData->CpuCount;
+
+ HasEnabledAp = FALSE;
+ HasEnabledIdleAp = FALSE;
+ for (Index = 0; Index < ProcessorNumber; Index ++) {
+ if (Index == CallerNumber) {
+ //
+ // Skip BSP
+ //
+ continue;
+ }
+ if (PeiCpuMpData->CpuData[Index].State != CpuStateDisabled) {
+ HasEnabledAp = TRUE;
+ if (PeiCpuMpData->CpuData[Index].State != CpuStateBusy) {
+ HasEnabledIdleAp = TRUE;
+ }
+ }
+ }
+ if (!HasEnabledAp) {
+ //
+ // If no enabled AP exists, return EFI_NOT_STARTED.
+ //
+ return EFI_NOT_STARTED;
+ }
+ if (!HasEnabledIdleAp) {
+ //
+ // If any enabled APs are busy, return EFI_NOT_READY.
+ //
+ return EFI_NOT_READY;
+ }
+
+ if (PeiCpuMpData->EndOfPeiFlag) {
+ //
+ // Backup original data and copy AP reset vector in it
+ //
+ BackupAndPrepareWakeupBuffer(PeiCpuMpData);
+ }
+
+ WaitCountNumber = TimeoutInMicroSeconds / CPU_CHECK_AP_INTERVAL + 1;
+ WaitCountIndex = 0;
+ FinishedCount = &PeiCpuMpData->FinishedCount;
+ if (!SingleThread) {
+ WakeUpAP (PeiCpuMpData, TRUE, 0, Procedure, ProcedureArgument);
+ //
+ // Wait to finish
+ //
+ if (TimeoutInMicroSeconds == 0) {
+ while (*FinishedCount < ProcessorNumber - 1) {
+ CpuPause ();
+ }
+ Status = EFI_SUCCESS;
+ } else {
+ Status = EFI_TIMEOUT;
+ for (WaitCountIndex = 0; WaitCountIndex < WaitCountNumber; WaitCountIndex++) {
+ MicroSecondDelay (CPU_CHECK_AP_INTERVAL);
+ if (*FinishedCount >= ProcessorNumber - 1) {
+ Status = EFI_SUCCESS;
+ break;
+ }
+ }
+ }
+ } else {
+ Status = EFI_SUCCESS;
+ for (Index = 0; Index < ProcessorNumber; Index++) {
+ if (Index == CallerNumber) {
+ continue;
+ }
+ WakeUpAP (PeiCpuMpData, FALSE, Index, Procedure, ProcedureArgument);
+ //
+ // Wait to finish
+ //
+ if (TimeoutInMicroSeconds == 0) {
+ while (*FinishedCount < 1) {
+ CpuPause ();
+ }
+ } else {
+ for (WaitCountIndex = 0; WaitCountIndex < WaitCountNumber; WaitCountIndex++) {
+ MicroSecondDelay (CPU_CHECK_AP_INTERVAL);
+ if (*FinishedCount >= 1) {
+ break;
+ }
+ }
+ if (WaitCountIndex == WaitCountNumber) {
+ Status = EFI_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ if (PeiCpuMpData->EndOfPeiFlag) {
+ //
+ // Restore original data
+ //
+ RestoreWakeupBuffer(PeiCpuMpData);
+ }
+
+ return Status;
+}
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function. The caller can request the BSP to wait for the completion
+ of the AP. This service may only be called from the BSP.
+
+ This function is used to dispatch one enabled AP to the function specified by
+ Procedure passing in the argument specified by ProcedureArgument.
+ The execution is in blocking mode. The BSP waits until the AP finishes or
+ TimeoutInMicroSecondss expires.
+
+ If the timeout specified by TimeoutInMicroseconds expires before the AP returns
+ from Procedure, then execution of Procedure by the AP is terminated. The AP is
+ available for subsequent calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() and
+ EFI_PEI_MP_SERVICES_PPI.StartupThisAP().
+
+ @param[in] PeiServices An indirect pointer to the PEI Services Table
+ published by the PEI Foundation.
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] Procedure A pointer to the function to be run on enabled APs of
+ the system.
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] TimeoutInMicroseconds
+ Indicates the time limit in microseconds for APs to
+ return from Procedure, for blocking mode only. Zero
+ means infinity. If the timeout expires before all APs
+ return from Procedure, then Procedure on the failed APs
+ is terminated. All enabled APs are available for next
+ function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()
+ or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the
+ timeout expires in blocking mode, BSP returns
+ EFI_TIMEOUT.
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before the
+ timeout expires.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the
+ specified AP has finished.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+**/
+EFI_STATUS
+EFIAPI
+PeiStartupThisAP (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+ UINTN CallerNumber;
+ volatile UINT32 *FinishedCount;
+ EFI_STATUS Status;
+ UINTN WaitCountIndex;
+ UINTN WaitCountNumber;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ PeiWhoAmI (PeiServices, This, &CallerNumber);
+ if (CallerNumber != PeiCpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (ProcessorNumber >= PeiCpuMpData->CpuCount) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (ProcessorNumber == PeiCpuMpData->BspNumber || Procedure == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether specified AP is disabled
+ //
+ if (PeiCpuMpData->CpuData[ProcessorNumber].State == CpuStateDisabled) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (PeiCpuMpData->EndOfPeiFlag) {
+ //
+ // Backup original data and copy AP reset vector in it
+ //
+ BackupAndPrepareWakeupBuffer(PeiCpuMpData);
+ }
+
+ WaitCountNumber = TimeoutInMicroseconds / CPU_CHECK_AP_INTERVAL + 1;
+ WaitCountIndex = 0;
+ FinishedCount = &PeiCpuMpData->FinishedCount;
+
+ WakeUpAP (PeiCpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument);
+
+ //
+ // Wait to finish
+ //
+ if (TimeoutInMicroseconds == 0) {
+ while (*FinishedCount < 1) {
+ CpuPause() ;
+ }
+ Status = EFI_SUCCESS;
+ } else {
+ Status = EFI_TIMEOUT;
+ for (WaitCountIndex = 0; WaitCountIndex < WaitCountNumber; WaitCountIndex++) {
+ MicroSecondDelay (CPU_CHECK_AP_INTERVAL);
+ if (*FinishedCount >= 1) {
+ Status = EFI_SUCCESS;
+ break;
+ }
+ }
+ }
+
+ if (PeiCpuMpData->EndOfPeiFlag) {
+ //
+ // Backup original data and copy AP reset vector in it
+ //
+ RestoreWakeupBuffer(PeiCpuMpData);
+ }
+
+ return Status;
+}
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be performed
+ by the current BSP.
+
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. The new BSP can take over the
+ execution of the old BSP and continue seamlessly from where the old one left
+ off.
+
+ If the BSP cannot be switched prior to the return from this service, then
+ EFI_UNSUPPORTED must be returned.
+
+ @param[in] PeiServices An indirect pointer to the PEI Services Table
+ published by the PEI Foundation.
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an enabled
+ AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to this
+ service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_SUCCESS The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or a disabled
+ AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+**/
+EFI_STATUS
+EFIAPI
+PeiSwitchBSP (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+ UINTN CallerNumber;
+ MSR_IA32_APIC_BASE ApicBaseMsr;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ PeiWhoAmI (PeiServices, This, &CallerNumber);
+ if (CallerNumber != PeiCpuMpData->BspNumber) {
+ return EFI_SUCCESS;
+ }
+
+ if (ProcessorNumber >= PeiCpuMpData->CpuCount) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Check whether specified AP is disabled
+ //
+ if (PeiCpuMpData->CpuData[ProcessorNumber].State == CpuStateDisabled) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether ProcessorNumber specifies the current BSP
+ //
+ if (ProcessorNumber == PeiCpuMpData->BspNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether specified AP is busy
+ //
+ if (PeiCpuMpData->CpuData[ProcessorNumber].State == CpuStateBusy) {
+ return EFI_NOT_READY;
+ }
+
+ //
+ // Clear the BSP bit of MSR_IA32_APIC_BASE
+ //
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE_ADDRESS);
+ ApicBaseMsr.Bits.Bsp = 0;
+ AsmWriteMsr64 (MSR_IA32_APIC_BASE_ADDRESS, ApicBaseMsr.Uint64);
+
+ PeiCpuMpData->BSPInfo.State = CPU_SWITCH_STATE_IDLE;
+ PeiCpuMpData->APInfo.State = CPU_SWITCH_STATE_IDLE;
+
+ if (PeiCpuMpData->EndOfPeiFlag) {
+ //
+ // Backup original data and copy AP reset vector in it
+ //
+ BackupAndPrepareWakeupBuffer(PeiCpuMpData);
+ }
+
+ //
+ // Need to wakeUp AP (future BSP).
+ //
+ WakeUpAP (PeiCpuMpData, FALSE, ProcessorNumber, FutureBSPProc, PeiCpuMpData);
+
+ AsmExchangeRole (&PeiCpuMpData->BSPInfo, &PeiCpuMpData->APInfo);
+
+ if (PeiCpuMpData->EndOfPeiFlag) {
+ //
+ // Backup original data and copy AP reset vector in it
+ //
+ RestoreWakeupBuffer(PeiCpuMpData);
+ }
+
+ //
+ // Set the BSP bit of MSR_IA32_APIC_BASE on new BSP
+ //
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE_ADDRESS);
+ ApicBaseMsr.Bits.Bsp = 1;
+ AsmWriteMsr64 (MSR_IA32_APIC_BASE_ADDRESS, ApicBaseMsr.Uint64);
+ //
+ // Set old BSP enable state
+ //
+ if (!EnableOldBSP) {
+ PeiCpuMpData->CpuData[PeiCpuMpData->BspNumber].State = CpuStateDisabled;
+ }
+ //
+ // Save new BSP number
+ //
+ PeiCpuMpData->BspNumber = (UINT32) ProcessorNumber;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ This service allows the caller enable or disable an AP from this point onward.
+ The caller can optionally specify the health status of the AP by Health. If
+ an AP is being disabled, then the state of the disabled AP is implementation
+ dependent. If an AP is enabled, then the implementation must guarantee that a
+ complete initialization sequence is performed on the AP, so the AP is in a state
+ that is compatible with an MP operating system.
+
+ If the enable or disable AP operation cannot be completed prior to the return
+ from this service, then EFI_UNSUPPORTED must be returned.
+
+ @param[in] PeiServices An indirect pointer to the PEI Services Table
+ published by the PEI Foundation.
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for enabled,
+ FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies the
+ new health status of the AP. This flag corresponds to
+ StatusFlag defined in EFI_PEI_MP_SERVICES_PPI.GetProcessorInfo().
+ Only the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter is
+ ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed prior
+ to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+**/
+EFI_STATUS
+EFIAPI
+PeiEnableDisableAP (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+ UINTN CallerNumber;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ PeiWhoAmI (PeiServices, This, &CallerNumber);
+ if (CallerNumber != PeiCpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (ProcessorNumber == PeiCpuMpData->BspNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (ProcessorNumber >= PeiCpuMpData->CpuCount) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (!EnableAP) {
+ PeiCpuMpData->CpuData[ProcessorNumber].State = CpuStateDisabled;
+ } else {
+ PeiCpuMpData->CpuData[ProcessorNumber].State = CpuStateIdle;
+ }
+
+ if (HealthFlag != NULL) {
+ PeiCpuMpData->CpuData[ProcessorNumber].CpuHealthy =
+ (BOOLEAN) ((*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT) != 0);
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ This return the handle number for the calling processor. This service may be
+ called from the BSP and APs.
+
+ This service returns the processor handle number for the calling processor.
+ The returned value is in the range from 0 to the total number of logical
+ processors minus 1. The total number of logical processors can be retrieved
+ with EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). This service may be
+ called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER
+ is returned. Otherwise, the current processors handle number is returned in
+ ProcessorNumber, and EFI_SUCCESS is returned.
+
+ @param[in] PeiServices An indirect pointer to the PEI Services Table
+ published by the PEI Foundation.
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[out] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was returned in
+ ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+**/
+EFI_STATUS
+EFIAPI
+PeiWhoAmI (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ OUT UINTN *ProcessorNumber
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (ProcessorNumber == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return GetProcessorNumber (PeiCpuMpData, ProcessorNumber);
+}
+
|