diff options
Diffstat (limited to 'Core/UefiCpuPkg/Include/Library/LocalApicLib.h')
| -rw-r--r-- | Core/UefiCpuPkg/Include/Library/LocalApicLib.h | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/Core/UefiCpuPkg/Include/Library/LocalApicLib.h b/Core/UefiCpuPkg/Include/Library/LocalApicLib.h new file mode 100644 index 0000000000..cd4e613ef5 --- /dev/null +++ b/Core/UefiCpuPkg/Include/Library/LocalApicLib.h @@ -0,0 +1,415 @@ +/** @file
+ Public include file for Local APIC library.
+
+ Local APIC library assumes local APIC is enabled. It does not
+ handles cases where local APIC is disabled.
+
+ Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __LOCAL_APIC_LIB_H__
+#define __LOCAL_APIC_LIB_H__
+
+#define LOCAL_APIC_MODE_XAPIC 0x1 ///< xAPIC mode.
+#define LOCAL_APIC_MODE_X2APIC 0x2 ///< x2APIC mode.
+
+/**
+ Retrieve the base address of local APIC.
+
+ @return The base address of local APIC.
+
+**/
+UINTN
+EFIAPI
+GetLocalApicBaseAddress (
+ VOID
+ );
+
+/**
+ Set the base address of local APIC.
+
+ If BaseAddress is not aligned on a 4KB boundary, then ASSERT().
+
+ @param[in] BaseAddress Local APIC base address to be set.
+
+**/
+VOID
+EFIAPI
+SetLocalApicBaseAddress (
+ IN UINTN BaseAddress
+ );
+
+/**
+ Get the current local APIC mode.
+
+ If local APIC is disabled, then ASSERT.
+
+ @retval LOCAL_APIC_MODE_XAPIC current APIC mode is xAPIC.
+ @retval LOCAL_APIC_MODE_X2APIC current APIC mode is x2APIC.
+**/
+UINTN
+EFIAPI
+GetApicMode (
+ VOID
+ );
+
+/**
+ Set the current local APIC mode.
+
+ If the specified local APIC mode is not valid, then ASSERT.
+ If the specified local APIC mode can't be set as current, then ASSERT.
+
+ @param ApicMode APIC mode to be set.
+
+ @note This API must not be called from an interrupt handler or SMI handler.
+ It may result in unpredictable behavior.
+**/
+VOID
+EFIAPI
+SetApicMode (
+ IN UINTN ApicMode
+ );
+
+/**
+ Get the initial local APIC ID of the executing processor assigned by hardware upon power on or reset.
+
+ In xAPIC mode, the initial local APIC ID may be different from current APIC ID.
+ In x2APIC mode, the local APIC ID can't be changed and there is no concept of initial APIC ID. In this case,
+ the 32-bit local APIC ID is returned as initial APIC ID.
+
+ @return 32-bit initial local APIC ID of the executing processor.
+**/
+UINT32
+EFIAPI
+GetInitialApicId (
+ VOID
+ );
+
+/**
+ Get the local APIC ID of the executing processor.
+
+ @return 32-bit local APIC ID of the executing processor.
+**/
+UINT32
+EFIAPI
+GetApicId (
+ VOID
+ );
+
+/**
+ Get the value of the local APIC version register.
+
+ @return the value of the local APIC version register.
+**/
+UINT32
+EFIAPI
+GetApicVersion (
+ VOID
+ );
+
+/**
+ Send a Fixed IPI to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ @param ApicId The local APIC ID of the target processor.
+ @param Vector The vector number of the interrupt being sent.
+**/
+VOID
+EFIAPI
+SendFixedIpi (
+ IN UINT32 ApicId,
+ IN UINT8 Vector
+ );
+
+/**
+ Send a Fixed IPI to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+
+ @param Vector The vector number of the interrupt being sent.
+**/
+VOID
+EFIAPI
+SendFixedIpiAllExcludingSelf (
+ IN UINT8 Vector
+ );
+
+/**
+ Send a SMI IPI to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ @param ApicId Specify the local APIC ID of the target processor.
+**/
+VOID
+EFIAPI
+SendSmiIpi (
+ IN UINT32 ApicId
+ );
+
+/**
+ Send a SMI IPI to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+**/
+VOID
+EFIAPI
+SendSmiIpiAllExcludingSelf (
+ VOID
+ );
+
+/**
+ Send an INIT IPI to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ @param ApicId Specify the local APIC ID of the target processor.
+**/
+VOID
+EFIAPI
+SendInitIpi (
+ IN UINT32 ApicId
+ );
+
+/**
+ Send an INIT IPI to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+**/
+VOID
+EFIAPI
+SendInitIpiAllExcludingSelf (
+ VOID
+ );
+
+/**
+ Send an INIT-Start-up-Start-up IPI sequence to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ if StartupRoutine >= 1M, then ASSERT.
+ if StartupRoutine is not multiple of 4K, then ASSERT.
+
+ @param ApicId Specify the local APIC ID of the target processor.
+ @param StartupRoutine Points to a start-up routine which is below 1M physical
+ address and 4K aligned.
+**/
+VOID
+EFIAPI
+SendInitSipiSipi (
+ IN UINT32 ApicId,
+ IN UINT32 StartupRoutine
+ );
+
+/**
+ Send an INIT-Start-up-Start-up IPI sequence to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+
+ if StartupRoutine >= 1M, then ASSERT.
+ if StartupRoutine is not multiple of 4K, then ASSERT.
+
+ @param StartupRoutine Points to a start-up routine which is below 1M physical
+ address and 4K aligned.
+**/
+VOID
+EFIAPI
+SendInitSipiSipiAllExcludingSelf (
+ IN UINT32 StartupRoutine
+ );
+
+/**
+ Initialize the state of the SoftwareEnable bit in the Local APIC
+ Spurious Interrupt Vector register.
+
+ @param Enable If TRUE, then set SoftwareEnable to 1
+ If FALSE, then set SoftwareEnable to 0.
+
+**/
+VOID
+EFIAPI
+InitializeLocalApicSoftwareEnable (
+ IN BOOLEAN Enable
+ );
+
+/**
+ Programming Virtual Wire Mode.
+
+ This function programs the local APIC for virtual wire mode following
+ the example described in chapter A.3 of the MP 1.4 spec.
+
+ IOxAPIC is not involved in this type of virtual wire mode.
+**/
+VOID
+EFIAPI
+ProgramVirtualWireMode (
+ VOID
+ );
+
+/**
+ Disable LINT0 & LINT1 interrupts.
+
+ This function sets the mask flag in the LVT LINT0 & LINT1 registers.
+**/
+VOID
+EFIAPI
+DisableLvtInterrupts (
+ VOID
+ );
+
+/**
+ Read the initial count value from the init-count register.
+
+ @return The initial count value read from the init-count register.
+**/
+UINT32
+EFIAPI
+GetApicTimerInitCount (
+ VOID
+ );
+
+/**
+ Read the current count value from the current-count register.
+
+ @return The current count value read from the current-count register.
+**/
+UINT32
+EFIAPI
+GetApicTimerCurrentCount (
+ VOID
+ );
+
+/**
+ Initialize the local APIC timer.
+
+ The local APIC timer is initialized and enabled.
+
+ @param DivideValue The divide value for the DCR. It is one of 1,2,4,8,16,32,64,128.
+ If it is 0, then use the current divide value in the DCR.
+ @param InitCount The initial count value.
+ @param PeriodicMode If TRUE, timer mode is peridoic. Othewise, timer mode is one-shot.
+ @param Vector The timer interrupt vector number.
+**/
+VOID
+EFIAPI
+InitializeApicTimer (
+ IN UINTN DivideValue,
+ IN UINT32 InitCount,
+ IN BOOLEAN PeriodicMode,
+ IN UINT8 Vector
+ );
+
+/**
+ Get the state of the local APIC timer.
+
+ @param DivideValue Return the divide value for the DCR. It is one of 1,2,4,8,16,32,64,128.
+ @param PeriodicMode Return the timer mode. If TRUE, timer mode is peridoic. Othewise, timer mode is one-shot.
+ @param Vector Return the timer interrupt vector number.
+**/
+VOID
+EFIAPI
+GetApicTimerState (
+ OUT UINTN *DivideValue OPTIONAL,
+ OUT BOOLEAN *PeriodicMode OPTIONAL,
+ OUT UINT8 *Vector OPTIONAL
+ );
+
+/**
+ Enable the local APIC timer interrupt.
+**/
+VOID
+EFIAPI
+EnableApicTimerInterrupt (
+ VOID
+ );
+
+/**
+ Disable the local APIC timer interrupt.
+**/
+VOID
+EFIAPI
+DisableApicTimerInterrupt (
+ VOID
+ );
+
+/**
+ Get the local APIC timer interrupt state.
+
+ @retval TRUE The local APIC timer interrupt is enabled.
+ @retval FALSE The local APIC timer interrupt is disabled.
+**/
+BOOLEAN
+EFIAPI
+GetApicTimerInterruptState (
+ VOID
+ );
+
+/**
+ Send EOI to the local APIC.
+**/
+VOID
+EFIAPI
+SendApicEoi (
+ VOID
+ );
+
+/**
+ Get the 32-bit address that a device should use to send a Message Signaled
+ Interrupt (MSI) to the Local APIC of the currently executing processor.
+
+ @return 32-bit address used to send an MSI to the Local APIC.
+**/
+UINT32
+EFIAPI
+GetApicMsiAddress (
+ VOID
+ );
+
+/**
+ Get the 64-bit data value that a device should use to send a Message Signaled
+ Interrupt (MSI) to the Local APIC of the currently executing processor.
+
+ If Vector is not in range 0x10..0xFE, then ASSERT().
+ If DeliveryMode is not supported, then ASSERT().
+
+ @param Vector The 8-bit interrupt vector associated with the MSI.
+ Must be in the range 0x10..0xFE
+ @param DeliveryMode A 3-bit value that specifies how the recept of the MSI
+ is handled. The only supported values are:
+ 0: LOCAL_APIC_DELIVERY_MODE_FIXED
+ 1: LOCAL_APIC_DELIVERY_MODE_LOWEST_PRIORITY
+ 2: LOCAL_APIC_DELIVERY_MODE_SMI
+ 4: LOCAL_APIC_DELIVERY_MODE_NMI
+ 5: LOCAL_APIC_DELIVERY_MODE_INIT
+ 7: LOCAL_APIC_DELIVERY_MODE_EXTINT
+
+ @param LevelTriggered TRUE specifies a level triggered interrupt.
+ FALSE specifies an edge triggered interrupt.
+ @param AssertionLevel Ignored if LevelTriggered is FALSE.
+ TRUE specifies a level triggered interrupt that active
+ when the interrupt line is asserted.
+ FALSE specifies a level triggered interrupt that active
+ when the interrupt line is deasserted.
+
+ @return 64-bit data value used to send an MSI to the Local APIC.
+**/
+UINT64
+EFIAPI
+GetApicMsiValue (
+ IN UINT8 Vector,
+ IN UINTN DeliveryMode,
+ IN BOOLEAN LevelTriggered,
+ IN BOOLEAN AssertionLevel
+ );
+
+#endif
+
|