diff options
Diffstat (limited to 'Core/UefiCpuPkg/Library/BaseXApicLib')
-rw-r--r-- | Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c | 942 | ||||
-rw-r--r-- | Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf | 49 | ||||
-rw-r--r-- | Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.uni | 23 |
3 files changed, 1014 insertions, 0 deletions
diff --git a/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c b/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c new file mode 100644 index 0000000000..1fca66ef1b --- /dev/null +++ b/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c @@ -0,0 +1,942 @@ +/** @file
+ Local APIC Library.
+
+ This local APIC library instance supports xAPIC mode only.
+
+ Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Register/Cpuid.h>
+#include <Register/LocalApic.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/LocalApicLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include <Library/PcdLib.h>
+
+//
+// Library internal functions
+//
+
+/**
+ Determine if the CPU supports the Local APIC Base Address MSR.
+
+ @retval TRUE The CPU supports the Local APIC Base Address MSR.
+ @retval FALSE The CPU does not support the Local APIC Base Address MSR.
+
+**/
+BOOLEAN
+LocalApicBaseAddressMsrSupported (
+ VOID
+ )
+{
+ UINT32 RegEax;
+ UINTN FamilyId;
+
+ AsmCpuid (1, &RegEax, NULL, NULL, NULL);
+ FamilyId = BitFieldRead32 (RegEax, 8, 11);
+ if (FamilyId == 0x04 || FamilyId == 0x05) {
+ //
+ // CPUs with a FamilyId of 0x04 or 0x05 do not support the
+ // Local APIC Base Address MSR
+ //
+ return FALSE;
+ }
+ return TRUE;
+}
+
+/**
+ Retrieve the base address of local APIC.
+
+ @return The base address of local APIC.
+
+**/
+UINTN
+EFIAPI
+GetLocalApicBaseAddress (
+ VOID
+ )
+{
+ MSR_IA32_APIC_BASE ApicBaseMsr;
+
+ if (!LocalApicBaseAddressMsrSupported ()) {
+ //
+ // If CPU does not support Local APIC Base Address MSR, then retrieve
+ // Local APIC Base Address from PCD
+ //
+ return PcdGet32 (PcdCpuLocalApicBaseAddress);
+ }
+
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE_ADDRESS);
+
+ return (UINTN)(LShiftU64 ((UINT64) ApicBaseMsr.Bits.ApicBaseHigh, 32)) +
+ (((UINTN)ApicBaseMsr.Bits.ApicBaseLow) << 12);
+}
+
+/**
+ Set the base address of local APIC.
+
+ If BaseAddress is not aligned on a 4KB boundary, then ASSERT().
+
+ @param[in] BaseAddress Local APIC base address to be set.
+
+**/
+VOID
+EFIAPI
+SetLocalApicBaseAddress (
+ IN UINTN BaseAddress
+ )
+{
+ MSR_IA32_APIC_BASE ApicBaseMsr;
+
+ ASSERT ((BaseAddress & (SIZE_4KB - 1)) == 0);
+
+ if (!LocalApicBaseAddressMsrSupported ()) {
+ //
+ // Ignore set request if the CPU does not support APIC Base Address MSR
+ //
+ return;
+ }
+
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE_ADDRESS);
+
+ ApicBaseMsr.Bits.ApicBaseLow = (UINT32) (BaseAddress >> 12);
+ ApicBaseMsr.Bits.ApicBaseHigh = (UINT32) (RShiftU64((UINT64) BaseAddress, 32));
+
+ AsmWriteMsr64 (MSR_IA32_APIC_BASE_ADDRESS, ApicBaseMsr.Uint64);
+}
+
+/**
+ Read from a local APIC register.
+
+ This function reads from a local APIC register either in xAPIC or x2APIC mode.
+ It is required that in xAPIC mode wider registers (64-bit or 256-bit) must be
+ accessed using multiple 32-bit loads or stores, so this function only performs
+ 32-bit read.
+
+ @param MmioOffset The MMIO offset of the local APIC register in xAPIC mode.
+ It must be 16-byte aligned.
+
+ @return 32-bit Value read from the register.
+**/
+UINT32
+EFIAPI
+ReadLocalApicReg (
+ IN UINTN MmioOffset
+ )
+{
+ ASSERT ((MmioOffset & 0xf) == 0);
+ ASSERT (GetApicMode () == LOCAL_APIC_MODE_XAPIC);
+
+ return MmioRead32 (GetLocalApicBaseAddress() + MmioOffset);
+}
+
+/**
+ Write to a local APIC register.
+
+ This function writes to a local APIC register either in xAPIC or x2APIC mode.
+ It is required that in xAPIC mode wider registers (64-bit or 256-bit) must be
+ accessed using multiple 32-bit loads or stores, so this function only performs
+ 32-bit write.
+
+ if the register index is invalid or unsupported in current APIC mode, then ASSERT.
+
+ @param MmioOffset The MMIO offset of the local APIC register in xAPIC mode.
+ It must be 16-byte aligned.
+ @param Value Value to be written to the register.
+**/
+VOID
+EFIAPI
+WriteLocalApicReg (
+ IN UINTN MmioOffset,
+ IN UINT32 Value
+ )
+{
+ ASSERT ((MmioOffset & 0xf) == 0);
+ ASSERT (GetApicMode () == LOCAL_APIC_MODE_XAPIC);
+
+ MmioWrite32 (GetLocalApicBaseAddress() + MmioOffset, Value);
+}
+
+/**
+ Send an IPI by writing to ICR.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ @param IcrLow 32-bit value to be written to the low half of ICR.
+ @param ApicId APIC ID of the target processor if this IPI is targeted for a specific processor.
+**/
+VOID
+SendIpi (
+ IN UINT32 IcrLow,
+ IN UINT32 ApicId
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLowReg;
+ UINT32 IcrHigh;
+ BOOLEAN InterruptState;
+
+ ASSERT (GetApicMode () == LOCAL_APIC_MODE_XAPIC);
+ ASSERT (ApicId <= 0xff);
+
+ InterruptState = SaveAndDisableInterrupts ();
+
+ //
+ // Save existing contents of ICR high 32 bits
+ //
+ IcrHigh = ReadLocalApicReg (XAPIC_ICR_HIGH_OFFSET);
+
+ //
+ // Wait for DeliveryStatus clear in case a previous IPI
+ // is still being sent
+ //
+ do {
+ IcrLowReg.Uint32 = ReadLocalApicReg (XAPIC_ICR_LOW_OFFSET);
+ } while (IcrLowReg.Bits.DeliveryStatus != 0);
+
+ //
+ // For xAPIC, the act of writing to the low doubleword of the ICR causes the IPI to be sent.
+ //
+ WriteLocalApicReg (XAPIC_ICR_HIGH_OFFSET, ApicId << 24);
+ WriteLocalApicReg (XAPIC_ICR_LOW_OFFSET, IcrLow);
+
+ //
+ // Wait for DeliveryStatus clear again
+ //
+ do {
+ IcrLowReg.Uint32 = ReadLocalApicReg (XAPIC_ICR_LOW_OFFSET);
+ } while (IcrLowReg.Bits.DeliveryStatus != 0);
+
+ //
+ // And restore old contents of ICR high
+ //
+ WriteLocalApicReg (XAPIC_ICR_HIGH_OFFSET, IcrHigh);
+
+ SetInterruptState (InterruptState);
+
+}
+
+//
+// Library API implementation functions
+//
+
+/**
+ Get the current local APIC mode.
+
+ If local APIC is disabled, then ASSERT.
+
+ @retval LOCAL_APIC_MODE_XAPIC current APIC mode is xAPIC.
+ @retval LOCAL_APIC_MODE_X2APIC current APIC mode is x2APIC.
+**/
+UINTN
+EFIAPI
+GetApicMode (
+ VOID
+ )
+{
+ DEBUG_CODE (
+ {
+ MSR_IA32_APIC_BASE ApicBaseMsr;
+
+ //
+ // Check to see if the CPU supports the APIC Base Address MSR
+ //
+ if (LocalApicBaseAddressMsrSupported ()) {
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE_ADDRESS);
+ //
+ // Local APIC should have been enabled
+ //
+ ASSERT (ApicBaseMsr.Bits.En != 0);
+ ASSERT (ApicBaseMsr.Bits.Extd == 0);
+ }
+ }
+ );
+ return LOCAL_APIC_MODE_XAPIC;
+}
+
+/**
+ Set the current local APIC mode.
+
+ If the specified local APIC mode is not valid, then ASSERT.
+ If the specified local APIC mode can't be set as current, then ASSERT.
+
+ @param ApicMode APIC mode to be set.
+
+ @note This API must not be called from an interrupt handler or SMI handler.
+ It may result in unpredictable behavior.
+**/
+VOID
+EFIAPI
+SetApicMode (
+ IN UINTN ApicMode
+ )
+{
+ ASSERT (ApicMode == LOCAL_APIC_MODE_XAPIC);
+ ASSERT (GetApicMode () == LOCAL_APIC_MODE_XAPIC);
+}
+
+/**
+ Get the initial local APIC ID of the executing processor assigned by hardware upon power on or reset.
+
+ In xAPIC mode, the initial local APIC ID may be different from current APIC ID.
+ In x2APIC mode, the local APIC ID can't be changed and there is no concept of initial APIC ID. In this case,
+ the 32-bit local APIC ID is returned as initial APIC ID.
+
+ @return 32-bit initial local APIC ID of the executing processor.
+**/
+UINT32
+EFIAPI
+GetInitialApicId (
+ VOID
+ )
+{
+ UINT32 ApicId;
+ UINT32 MaxCpuIdIndex;
+ UINT32 RegEbx;
+
+ ASSERT (GetApicMode () == LOCAL_APIC_MODE_XAPIC);
+
+ //
+ // Get the max index of basic CPUID
+ //
+ AsmCpuid (CPUID_SIGNATURE, &MaxCpuIdIndex, NULL, NULL, NULL);
+
+ //
+ // If CPUID Leaf B is supported,
+ // Then the initial 32-bit APIC ID = CPUID.0BH:EDX
+ // Else the initial 8-bit APIC ID = CPUID.1:EBX[31:24]
+ //
+ if (MaxCpuIdIndex >= CPUID_EXTENDED_TOPOLOGY) {
+ AsmCpuidEx (CPUID_EXTENDED_TOPOLOGY, 0, NULL, NULL, NULL, &ApicId);
+ return ApicId;
+ }
+
+ AsmCpuid (CPUID_VERSION_INFO, NULL, &RegEbx, NULL, NULL);
+ return RegEbx >> 24;
+}
+
+/**
+ Get the local APIC ID of the executing processor.
+
+ @return 32-bit local APIC ID of the executing processor.
+**/
+UINT32
+EFIAPI
+GetApicId (
+ VOID
+ )
+{
+ UINT32 ApicId;
+
+ ASSERT (GetApicMode () == LOCAL_APIC_MODE_XAPIC);
+
+ if ((ApicId = GetInitialApicId ()) < 0x100) {
+ //
+ // If the initial local APIC ID is less 0x100, read APIC ID from
+ // XAPIC_ID_OFFSET, otherwise return the initial local APIC ID.
+ //
+ ApicId = ReadLocalApicReg (XAPIC_ID_OFFSET);
+ ApicId >>= 24;
+ }
+ return ApicId;
+}
+
+/**
+ Get the value of the local APIC version register.
+
+ @return the value of the local APIC version register.
+**/
+UINT32
+EFIAPI
+GetApicVersion (
+ VOID
+ )
+{
+ return ReadLocalApicReg (XAPIC_VERSION_OFFSET);
+}
+
+/**
+ Send a Fixed IPI to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ @param ApicId The local APIC ID of the target processor.
+ @param Vector The vector number of the interrupt being sent.
+**/
+VOID
+EFIAPI
+SendFixedIpi (
+ IN UINT32 ApicId,
+ IN UINT8 Vector
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_FIXED;
+ IcrLow.Bits.Level = 1;
+ IcrLow.Bits.Vector = Vector;
+ SendIpi (IcrLow.Uint32, ApicId);
+}
+
+/**
+ Send a Fixed IPI to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+
+ @param Vector The vector number of the interrupt being sent.
+**/
+VOID
+EFIAPI
+SendFixedIpiAllExcludingSelf (
+ IN UINT8 Vector
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_FIXED;
+ IcrLow.Bits.Level = 1;
+ IcrLow.Bits.DestinationShorthand = LOCAL_APIC_DESTINATION_SHORTHAND_ALL_EXCLUDING_SELF;
+ IcrLow.Bits.Vector = Vector;
+ SendIpi (IcrLow.Uint32, 0);
+}
+
+/**
+ Send a SMI IPI to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ @param ApicId Specify the local APIC ID of the target processor.
+**/
+VOID
+EFIAPI
+SendSmiIpi (
+ IN UINT32 ApicId
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_SMI;
+ IcrLow.Bits.Level = 1;
+ SendIpi (IcrLow.Uint32, ApicId);
+}
+
+/**
+ Send a SMI IPI to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+**/
+VOID
+EFIAPI
+SendSmiIpiAllExcludingSelf (
+ VOID
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_SMI;
+ IcrLow.Bits.Level = 1;
+ IcrLow.Bits.DestinationShorthand = LOCAL_APIC_DESTINATION_SHORTHAND_ALL_EXCLUDING_SELF;
+ SendIpi (IcrLow.Uint32, 0);
+}
+
+/**
+ Send an INIT IPI to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ @param ApicId Specify the local APIC ID of the target processor.
+**/
+VOID
+EFIAPI
+SendInitIpi (
+ IN UINT32 ApicId
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_INIT;
+ IcrLow.Bits.Level = 1;
+ SendIpi (IcrLow.Uint32, ApicId);
+}
+
+/**
+ Send an INIT IPI to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+**/
+VOID
+EFIAPI
+SendInitIpiAllExcludingSelf (
+ VOID
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_INIT;
+ IcrLow.Bits.Level = 1;
+ IcrLow.Bits.DestinationShorthand = LOCAL_APIC_DESTINATION_SHORTHAND_ALL_EXCLUDING_SELF;
+ SendIpi (IcrLow.Uint32, 0);
+}
+
+/**
+ Send an INIT-Start-up-Start-up IPI sequence to a specified target processor.
+
+ This function returns after the IPI has been accepted by the target processor.
+
+ if StartupRoutine >= 1M, then ASSERT.
+ if StartupRoutine is not multiple of 4K, then ASSERT.
+
+ @param ApicId Specify the local APIC ID of the target processor.
+ @param StartupRoutine Points to a start-up routine which is below 1M physical
+ address and 4K aligned.
+**/
+VOID
+EFIAPI
+SendInitSipiSipi (
+ IN UINT32 ApicId,
+ IN UINT32 StartupRoutine
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ ASSERT (StartupRoutine < 0x100000);
+ ASSERT ((StartupRoutine & 0xfff) == 0);
+
+ SendInitIpi (ApicId);
+ MicroSecondDelay (PcdGet32(PcdCpuInitIpiDelayInMicroSeconds));
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.Vector = (StartupRoutine >> 12);
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_STARTUP;
+ IcrLow.Bits.Level = 1;
+ SendIpi (IcrLow.Uint32, ApicId);
+ MicroSecondDelay (200);
+ SendIpi (IcrLow.Uint32, ApicId);
+}
+
+/**
+ Send an INIT-Start-up-Start-up IPI sequence to all processors excluding self.
+
+ This function returns after the IPI has been accepted by the target processors.
+
+ if StartupRoutine >= 1M, then ASSERT.
+ if StartupRoutine is not multiple of 4K, then ASSERT.
+
+ @param StartupRoutine Points to a start-up routine which is below 1M physical
+ address and 4K aligned.
+**/
+VOID
+EFIAPI
+SendInitSipiSipiAllExcludingSelf (
+ IN UINT32 StartupRoutine
+ )
+{
+ LOCAL_APIC_ICR_LOW IcrLow;
+
+ ASSERT (StartupRoutine < 0x100000);
+ ASSERT ((StartupRoutine & 0xfff) == 0);
+
+ SendInitIpiAllExcludingSelf ();
+ MicroSecondDelay (PcdGet32(PcdCpuInitIpiDelayInMicroSeconds));
+ IcrLow.Uint32 = 0;
+ IcrLow.Bits.Vector = (StartupRoutine >> 12);
+ IcrLow.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_STARTUP;
+ IcrLow.Bits.Level = 1;
+ IcrLow.Bits.DestinationShorthand = LOCAL_APIC_DESTINATION_SHORTHAND_ALL_EXCLUDING_SELF;
+ SendIpi (IcrLow.Uint32, 0);
+ MicroSecondDelay (200);
+ SendIpi (IcrLow.Uint32, 0);
+}
+
+/**
+ Initialize the state of the SoftwareEnable bit in the Local APIC
+ Spurious Interrupt Vector register.
+
+ @param Enable If TRUE, then set SoftwareEnable to 1
+ If FALSE, then set SoftwareEnable to 0.
+
+**/
+VOID
+EFIAPI
+InitializeLocalApicSoftwareEnable (
+ IN BOOLEAN Enable
+ )
+{
+ LOCAL_APIC_SVR Svr;
+
+ //
+ // Set local APIC software-enabled bit.
+ //
+ Svr.Uint32 = ReadLocalApicReg (XAPIC_SPURIOUS_VECTOR_OFFSET);
+ if (Enable) {
+ if (Svr.Bits.SoftwareEnable == 0) {
+ Svr.Bits.SoftwareEnable = 1;
+ WriteLocalApicReg (XAPIC_SPURIOUS_VECTOR_OFFSET, Svr.Uint32);
+ }
+ } else {
+ if (Svr.Bits.SoftwareEnable == 1) {
+ Svr.Bits.SoftwareEnable = 0;
+ WriteLocalApicReg (XAPIC_SPURIOUS_VECTOR_OFFSET, Svr.Uint32);
+ }
+ }
+}
+
+/**
+ Programming Virtual Wire Mode.
+
+ This function programs the local APIC for virtual wire mode following
+ the example described in chapter A.3 of the MP 1.4 spec.
+
+ IOxAPIC is not involved in this type of virtual wire mode.
+**/
+VOID
+EFIAPI
+ProgramVirtualWireMode (
+ VOID
+ )
+{
+ LOCAL_APIC_SVR Svr;
+ LOCAL_APIC_LVT_LINT Lint;
+
+ //
+ // Enable the APIC via SVR and set the spurious interrupt to use Int 00F.
+ //
+ Svr.Uint32 = ReadLocalApicReg (XAPIC_SPURIOUS_VECTOR_OFFSET);
+ Svr.Bits.SpuriousVector = 0xf;
+ Svr.Bits.SoftwareEnable = 1;
+ WriteLocalApicReg (XAPIC_SPURIOUS_VECTOR_OFFSET, Svr.Uint32);
+
+ //
+ // Program the LINT0 vector entry as ExtInt. Not masked, edge, active high.
+ //
+ Lint.Uint32 = ReadLocalApicReg (XAPIC_LVT_LINT0_OFFSET);
+ Lint.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_EXTINT;
+ Lint.Bits.InputPinPolarity = 0;
+ Lint.Bits.TriggerMode = 0;
+ Lint.Bits.Mask = 0;
+ WriteLocalApicReg (XAPIC_LVT_LINT0_OFFSET, Lint.Uint32);
+
+ //
+ // Program the LINT0 vector entry as NMI. Not masked, edge, active high.
+ //
+ Lint.Uint32 = ReadLocalApicReg (XAPIC_LVT_LINT1_OFFSET);
+ Lint.Bits.DeliveryMode = LOCAL_APIC_DELIVERY_MODE_NMI;
+ Lint.Bits.InputPinPolarity = 0;
+ Lint.Bits.TriggerMode = 0;
+ Lint.Bits.Mask = 0;
+ WriteLocalApicReg (XAPIC_LVT_LINT1_OFFSET, Lint.Uint32);
+}
+
+/**
+ Disable LINT0 & LINT1 interrupts.
+
+ This function sets the mask flag in the LVT LINT0 & LINT1 registers.
+**/
+VOID
+EFIAPI
+DisableLvtInterrupts (
+ VOID
+ )
+{
+ LOCAL_APIC_LVT_LINT LvtLint;
+
+ LvtLint.Uint32 = ReadLocalApicReg (XAPIC_LVT_LINT0_OFFSET);
+ LvtLint.Bits.Mask = 1;
+ WriteLocalApicReg (XAPIC_LVT_LINT0_OFFSET, LvtLint.Uint32);
+
+ LvtLint.Uint32 = ReadLocalApicReg (XAPIC_LVT_LINT1_OFFSET);
+ LvtLint.Bits.Mask = 1;
+ WriteLocalApicReg (XAPIC_LVT_LINT1_OFFSET, LvtLint.Uint32);
+}
+
+/**
+ Read the initial count value from the init-count register.
+
+ @return The initial count value read from the init-count register.
+**/
+UINT32
+EFIAPI
+GetApicTimerInitCount (
+ VOID
+ )
+{
+ return ReadLocalApicReg (XAPIC_TIMER_INIT_COUNT_OFFSET);
+}
+
+/**
+ Read the current count value from the current-count register.
+
+ @return The current count value read from the current-count register.
+**/
+UINT32
+EFIAPI
+GetApicTimerCurrentCount (
+ VOID
+ )
+{
+ return ReadLocalApicReg (XAPIC_TIMER_CURRENT_COUNT_OFFSET);
+}
+
+/**
+ Initialize the local APIC timer.
+
+ The local APIC timer is initialized and enabled.
+
+ @param DivideValue The divide value for the DCR. It is one of 1,2,4,8,16,32,64,128.
+ If it is 0, then use the current divide value in the DCR.
+ @param InitCount The initial count value.
+ @param PeriodicMode If TRUE, timer mode is peridoic. Othewise, timer mode is one-shot.
+ @param Vector The timer interrupt vector number.
+**/
+VOID
+EFIAPI
+InitializeApicTimer (
+ IN UINTN DivideValue,
+ IN UINT32 InitCount,
+ IN BOOLEAN PeriodicMode,
+ IN UINT8 Vector
+ )
+{
+ LOCAL_APIC_DCR Dcr;
+ LOCAL_APIC_LVT_TIMER LvtTimer;
+ UINT32 Divisor;
+
+ //
+ // Ensure local APIC is in software-enabled state.
+ //
+ InitializeLocalApicSoftwareEnable (TRUE);
+
+ //
+ // Program init-count register.
+ //
+ WriteLocalApicReg (XAPIC_TIMER_INIT_COUNT_OFFSET, InitCount);
+
+ if (DivideValue != 0) {
+ ASSERT (DivideValue <= 128);
+ ASSERT (DivideValue == GetPowerOfTwo32((UINT32)DivideValue));
+ Divisor = (UINT32)((HighBitSet32 ((UINT32)DivideValue) - 1) & 0x7);
+
+ Dcr.Uint32 = ReadLocalApicReg (XAPIC_TIMER_DIVIDE_CONFIGURATION_OFFSET);
+ Dcr.Bits.DivideValue1 = (Divisor & 0x3);
+ Dcr.Bits.DivideValue2 = (Divisor >> 2);
+ WriteLocalApicReg (XAPIC_TIMER_DIVIDE_CONFIGURATION_OFFSET, Dcr.Uint32);
+ }
+
+ //
+ // Enable APIC timer interrupt with specified timer mode.
+ //
+ LvtTimer.Uint32 = ReadLocalApicReg (XAPIC_LVT_TIMER_OFFSET);
+ if (PeriodicMode) {
+ LvtTimer.Bits.TimerMode = 1;
+ } else {
+ LvtTimer.Bits.TimerMode = 0;
+ }
+ LvtTimer.Bits.Mask = 0;
+ LvtTimer.Bits.Vector = Vector;
+ WriteLocalApicReg (XAPIC_LVT_TIMER_OFFSET, LvtTimer.Uint32);
+}
+
+/**
+ Get the state of the local APIC timer.
+
+ This function will ASSERT if the local APIC is not software enabled.
+
+ @param DivideValue Return the divide value for the DCR. It is one of 1,2,4,8,16,32,64,128.
+ @param PeriodicMode Return the timer mode. If TRUE, timer mode is peridoic. Othewise, timer mode is one-shot.
+ @param Vector Return the timer interrupt vector number.
+**/
+VOID
+EFIAPI
+GetApicTimerState (
+ OUT UINTN *DivideValue OPTIONAL,
+ OUT BOOLEAN *PeriodicMode OPTIONAL,
+ OUT UINT8 *Vector OPTIONAL
+ )
+{
+ UINT32 Divisor;
+ LOCAL_APIC_DCR Dcr;
+ LOCAL_APIC_LVT_TIMER LvtTimer;
+
+ //
+ // Check the APIC Software Enable/Disable bit (bit 8) in Spurious-Interrupt
+ // Vector Register.
+ // This bit will be 1, if local APIC is software enabled.
+ //
+ ASSERT ((ReadLocalApicReg(XAPIC_SPURIOUS_VECTOR_OFFSET) & BIT8) != 0);
+
+ if (DivideValue != NULL) {
+ Dcr.Uint32 = ReadLocalApicReg (XAPIC_TIMER_DIVIDE_CONFIGURATION_OFFSET);
+ Divisor = Dcr.Bits.DivideValue1 | (Dcr.Bits.DivideValue2 << 2);
+ Divisor = (Divisor + 1) & 0x7;
+ *DivideValue = ((UINTN)1) << Divisor;
+ }
+
+ if (PeriodicMode != NULL || Vector != NULL) {
+ LvtTimer.Uint32 = ReadLocalApicReg (XAPIC_LVT_TIMER_OFFSET);
+ if (PeriodicMode != NULL) {
+ if (LvtTimer.Bits.TimerMode == 1) {
+ *PeriodicMode = TRUE;
+ } else {
+ *PeriodicMode = FALSE;
+ }
+ }
+ if (Vector != NULL) {
+ *Vector = (UINT8) LvtTimer.Bits.Vector;
+ }
+ }
+}
+
+/**
+ Enable the local APIC timer interrupt.
+**/
+VOID
+EFIAPI
+EnableApicTimerInterrupt (
+ VOID
+ )
+{
+ LOCAL_APIC_LVT_TIMER LvtTimer;
+
+ LvtTimer.Uint32 = ReadLocalApicReg (XAPIC_LVT_TIMER_OFFSET);
+ LvtTimer.Bits.Mask = 0;
+ WriteLocalApicReg (XAPIC_LVT_TIMER_OFFSET, LvtTimer.Uint32);
+}
+
+/**
+ Disable the local APIC timer interrupt.
+**/
+VOID
+EFIAPI
+DisableApicTimerInterrupt (
+ VOID
+ )
+{
+ LOCAL_APIC_LVT_TIMER LvtTimer;
+
+ LvtTimer.Uint32 = ReadLocalApicReg (XAPIC_LVT_TIMER_OFFSET);
+ LvtTimer.Bits.Mask = 1;
+ WriteLocalApicReg (XAPIC_LVT_TIMER_OFFSET, LvtTimer.Uint32);
+}
+
+/**
+ Get the local APIC timer interrupt state.
+
+ @retval TRUE The local APIC timer interrupt is enabled.
+ @retval FALSE The local APIC timer interrupt is disabled.
+**/
+BOOLEAN
+EFIAPI
+GetApicTimerInterruptState (
+ VOID
+ )
+{
+ LOCAL_APIC_LVT_TIMER LvtTimer;
+
+ LvtTimer.Uint32 = ReadLocalApicReg (XAPIC_LVT_TIMER_OFFSET);
+ return (BOOLEAN)(LvtTimer.Bits.Mask == 0);
+}
+
+/**
+ Send EOI to the local APIC.
+**/
+VOID
+EFIAPI
+SendApicEoi (
+ VOID
+ )
+{
+ WriteLocalApicReg (XAPIC_EOI_OFFSET, 0);
+}
+
+/**
+ Get the 32-bit address that a device should use to send a Message Signaled
+ Interrupt (MSI) to the Local APIC of the currently executing processor.
+
+ @return 32-bit address used to send an MSI to the Local APIC.
+**/
+UINT32
+EFIAPI
+GetApicMsiAddress (
+ VOID
+ )
+{
+ LOCAL_APIC_MSI_ADDRESS MsiAddress;
+
+ //
+ // Return address for an MSI interrupt to be delivered only to the APIC ID
+ // of the currently executing processor.
+ //
+ MsiAddress.Uint32 = 0;
+ MsiAddress.Bits.BaseAddress = 0xFEE;
+ MsiAddress.Bits.DestinationId = GetApicId ();
+ return MsiAddress.Uint32;
+}
+
+/**
+ Get the 64-bit data value that a device should use to send a Message Signaled
+ Interrupt (MSI) to the Local APIC of the currently executing processor.
+
+ If Vector is not in range 0x10..0xFE, then ASSERT().
+ If DeliveryMode is not supported, then ASSERT().
+
+ @param Vector The 8-bit interrupt vector associated with the MSI.
+ Must be in the range 0x10..0xFE
+ @param DeliveryMode A 3-bit value that specifies how the recept of the MSI
+ is handled. The only supported values are:
+ 0: LOCAL_APIC_DELIVERY_MODE_FIXED
+ 1: LOCAL_APIC_DELIVERY_MODE_LOWEST_PRIORITY
+ 2: LOCAL_APIC_DELIVERY_MODE_SMI
+ 4: LOCAL_APIC_DELIVERY_MODE_NMI
+ 5: LOCAL_APIC_DELIVERY_MODE_INIT
+ 7: LOCAL_APIC_DELIVERY_MODE_EXTINT
+
+ @param LevelTriggered TRUE specifies a level triggered interrupt.
+ FALSE specifies an edge triggered interrupt.
+ @param AssertionLevel Ignored if LevelTriggered is FALSE.
+ TRUE specifies a level triggered interrupt that active
+ when the interrupt line is asserted.
+ FALSE specifies a level triggered interrupt that active
+ when the interrupt line is deasserted.
+
+ @return 64-bit data value used to send an MSI to the Local APIC.
+**/
+UINT64
+EFIAPI
+GetApicMsiValue (
+ IN UINT8 Vector,
+ IN UINTN DeliveryMode,
+ IN BOOLEAN LevelTriggered,
+ IN BOOLEAN AssertionLevel
+ )
+{
+ LOCAL_APIC_MSI_DATA MsiData;
+
+ ASSERT (Vector >= 0x10 && Vector <= 0xFE);
+ ASSERT (DeliveryMode < 8 && DeliveryMode != 6 && DeliveryMode != 3);
+
+ MsiData.Uint64 = 0;
+ MsiData.Bits.Vector = Vector;
+ MsiData.Bits.DeliveryMode = (UINT32)DeliveryMode;
+ if (LevelTriggered) {
+ MsiData.Bits.TriggerMode = 1;
+ if (AssertionLevel) {
+ MsiData.Bits.Level = 1;
+ }
+ }
+ return MsiData.Uint64;
+}
diff --git a/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf b/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf new file mode 100644 index 0000000000..7dd2714af3 --- /dev/null +++ b/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf @@ -0,0 +1,49 @@ +## @file
+# The Local Apic library supports xAPIC mode only.
+#
+# Note: Local APIC library assumes local APIC is enabled. It does not handle cases
+# where local APIC is disabled.
+#
+# Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = BaseXApicLib
+ MODULE_UNI_FILE = BaseXApicLib.uni
+ FILE_GUID = D87CA0A8-1AC2-439b-90F8-EF4A2AC88DAF
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.1
+ LIBRARY_CLASS = LocalApicLib
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources]
+ BaseXApicLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ TimerLib
+ IoLib
+ PcdLib
+
+[Pcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuInitIpiDelayInMicroSeconds ## SOMETIMES_CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuLocalApicBaseAddress ## SOMETIMES_CONSUMES
diff --git a/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.uni b/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.uni new file mode 100644 index 0000000000..49b05e6cec --- /dev/null +++ b/Core/UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.uni @@ -0,0 +1,23 @@ +// /** @file
+// The Local Apic library supports xAPIC mode only.
+//
+// Note: Local APIC library assumes local APIC is enabled. It does not handle cases
+// where local APIC is disabled.
+//
+// Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+//
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "Supports xAPIC mode only"
+
+#string STR_MODULE_DESCRIPTION #language en-US "Note: Local APIC library assumes local APIC is enabled. It does not handle cases where local APIC is disabled."
+
|