diff options
Diffstat (limited to 'DuetPkg/PciBusNoEnumerationDxe/PciEnumeratorSupport.c')
| -rw-r--r-- | DuetPkg/PciBusNoEnumerationDxe/PciEnumeratorSupport.c | 1376 |
1 files changed, 0 insertions, 1376 deletions
diff --git a/DuetPkg/PciBusNoEnumerationDxe/PciEnumeratorSupport.c b/DuetPkg/PciBusNoEnumerationDxe/PciEnumeratorSupport.c deleted file mode 100644 index fb41727e7a..0000000000 --- a/DuetPkg/PciBusNoEnumerationDxe/PciEnumeratorSupport.c +++ /dev/null @@ -1,1376 +0,0 @@ -/*++
-
-Copyright (c) 2005 - 2014, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- PciEnumeratorSupport.c
-
-Abstract:
-
- PCI Bus Driver
-
-Revision History
-
---*/
-
-#include "PciBus.h"
-
-EFI_STATUS
-InitializePPB (
- IN PCI_IO_DEVICE *PciIoDevice
-);
-
-EFI_STATUS
-InitializeP2C (
- IN PCI_IO_DEVICE *PciIoDevice
-);
-
-PCI_IO_DEVICE*
-CreatePciIoDevice (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
-);
-
-
-PCI_IO_DEVICE*
-GatherP2CInfo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
-);
-
-UINTN
-PciParseBar (
- IN PCI_IO_DEVICE *PciIoDevice,
- IN UINTN Offset,
- IN UINTN BarIndex
-);
-
-
-EFI_STATUS
-PciSearchDevice (
- IN PCI_IO_DEVICE *Bridge,
- PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func,
- PCI_IO_DEVICE **PciDevice
-);
-
-
-EFI_STATUS
-DetermineDeviceAttribute (
- IN PCI_IO_DEVICE *PciIoDevice
-);
-
-EFI_STATUS
-BarExisted (
- IN PCI_IO_DEVICE *PciIoDevice,
- IN UINTN Offset,
- OUT UINT32 *BarLengthValue,
- OUT UINT32 *OriginalBarValue
- );
-
-
-
-EFI_DEVICE_PATH_PROTOCOL*
-CreatePciDevicePath(
- IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,
- IN PCI_IO_DEVICE *PciIoDevice
-);
-
-PCI_IO_DEVICE*
-GatherDeviceInfo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
-);
-
-PCI_IO_DEVICE*
-GatherPPBInfo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
-);
-
-EFI_STATUS
-PciDevicePresent (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
- )
-/*++
-
-Routine Description:
-
- This routine is used to check whether the pci device is present
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- UINT64 Address;
- EFI_STATUS Status;
-
- //
- // Create PCI address map in terms of Bus, Device and Func
- //
- Address = EFI_PCI_ADDRESS (Bus, Device, Func, 0);
-
- //
- // Read the Vendor Id register
- //
- Status = PciRootBridgeIo->Pci.Read (
- PciRootBridgeIo,
- EfiPciWidthUint32,
- Address,
- 1,
- Pci
- );
-
- if (!EFI_ERROR (Status) && (Pci->Hdr).VendorId != 0xffff) {
-
- //
- // Read the entire config header for the device
- //
-
- Status = PciRootBridgeIo->Pci.Read (
- PciRootBridgeIo,
- EfiPciWidthUint32,
- Address,
- sizeof (PCI_TYPE00) / sizeof (UINT32),
- Pci
- );
-
- return EFI_SUCCESS;
- }
-
- return EFI_NOT_FOUND;
-}
-
-EFI_STATUS
-PciPciDeviceInfoCollector (
- IN PCI_IO_DEVICE *Bridge,
- UINT8 StartBusNumber
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- EFI_STATUS Status;
- PCI_TYPE00 Pci;
- UINT8 Device;
- UINT8 Func;
- UINT8 SecBus;
- PCI_IO_DEVICE *PciIoDevice;
- EFI_PCI_IO_PROTOCOL *PciIo;
-
- Status = EFI_SUCCESS;
- SecBus = 0;
- PciIoDevice = NULL;
-
- for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) {
-
- for (Func = 0; Func <= PCI_MAX_FUNC; Func++) {
-
- //
- // Check to see whether PCI device is present
- //
-
- Status = PciDevicePresent (
- Bridge->PciRootBridgeIo,
- &Pci,
- (UINT8) StartBusNumber,
- (UINT8) Device,
- (UINT8) Func
- );
-
- if (!EFI_ERROR (Status)) {
-
- //
- // Collect all the information about the PCI device discovered
- //
- Status = PciSearchDevice (
- Bridge,
- &Pci,
- (UINT8) StartBusNumber,
- Device,
- Func,
- &PciIoDevice
- );
-
- //
- // Recursively scan PCI busses on the other side of PCI-PCI bridges
- //
- //
-
- if (!EFI_ERROR (Status) && (IS_PCI_BRIDGE (&Pci) || IS_CARDBUS_BRIDGE (&Pci))) {
-
- //
- // If it is PPB, we need to get the secondary bus to continue the enumeration
- //
- PciIo = &(PciIoDevice->PciIo);
-
- Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x19, 1, &SecBus);
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Deep enumerate the next level bus
- //
- Status = PciPciDeviceInfoCollector (
- PciIoDevice,
- (UINT8) (SecBus)
- );
-
- }
-
- if (Func == 0 && !IS_PCI_MULTI_FUNC (&Pci)) {
-
- //
- // Skip sub functions, this is not a multi function device
- //
- Func = PCI_MAX_FUNC;
- }
- }
-
- }
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-PciSearchDevice (
- IN PCI_IO_DEVICE *Bridge,
- IN PCI_TYPE00 *Pci,
- IN UINT8 Bus,
- IN UINT8 Device,
- IN UINT8 Func,
- OUT PCI_IO_DEVICE **PciDevice
- )
-/*++
-
-Routine Description:
-
- Search required device.
-
-Arguments:
-
- Bridge - A pointer to the PCI_IO_DEVICE.
- Pci - A pointer to the PCI_TYPE00.
- Bus - Bus number.
- Device - Device number.
- Func - Function number.
- PciDevice - The Required pci device.
-
-Returns:
-
- Status code.
-
---*/
-{
- PCI_IO_DEVICE *PciIoDevice;
-
- PciIoDevice = NULL;
-
- if (!IS_PCI_BRIDGE (Pci)) {
-
- if (IS_CARDBUS_BRIDGE (Pci)) {
- PciIoDevice = GatherP2CInfo (
- Bridge->PciRootBridgeIo,
- Pci,
- Bus,
- Device,
- Func
- );
- if ((PciIoDevice != NULL) && (gFullEnumeration == TRUE)) {
- InitializeP2C (PciIoDevice);
- }
- } else {
-
- //
- // Create private data for Pci Device
- //
- PciIoDevice = GatherDeviceInfo (
- Bridge->PciRootBridgeIo,
- Pci,
- Bus,
- Device,
- Func
- );
-
- }
-
- } else {
-
- //
- // Create private data for PPB
- //
- PciIoDevice = GatherPPBInfo (
- Bridge->PciRootBridgeIo,
- Pci,
- Bus,
- Device,
- Func
- );
-
- //
- // Special initialization for PPB including making the PPB quiet
- //
- if ((PciIoDevice != NULL) && (gFullEnumeration == TRUE)) {
- InitializePPB (PciIoDevice);
- }
- }
-
- if (!PciIoDevice) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // Create a device path for this PCI device and store it into its private data
- //
- CreatePciDevicePath(
- Bridge->DevicePath,
- PciIoDevice
- );
-
- //
- // Detect this function has option rom
- //
- if (gFullEnumeration) {
-
- if (!IS_CARDBUS_BRIDGE (Pci)) {
-
- GetOpRomInfo (PciIoDevice);
-
- }
-
- ResetPowerManagementFeature (PciIoDevice);
-
- }
- else {
- PciRomGetRomResourceFromPciOptionRomTable (
- &gPciBusDriverBinding,
- PciIoDevice->PciRootBridgeIo,
- PciIoDevice
- );
- }
-
-
- //
- // Insert it into a global tree for future reference
- //
- InsertPciDevice (Bridge, PciIoDevice);
-
- //
- // Determine PCI device attributes
- //
- DetermineDeviceAttribute (PciIoDevice);
-
- if (PciDevice != NULL) {
- *PciDevice = PciIoDevice;
- }
-
- return EFI_SUCCESS;
-}
-
-PCI_IO_DEVICE *
-GatherDeviceInfo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- UINTN Offset;
- UINTN BarIndex;
- PCI_IO_DEVICE *PciIoDevice;
-
- PciIoDevice = CreatePciIoDevice (
- PciRootBridgeIo,
- Pci,
- Bus,
- Device,
- Func
- );
-
- if (!PciIoDevice) {
- return NULL;
- }
-
- //
- // If it is a full enumeration, disconnect the device in advance
- //
- if (gFullEnumeration) {
-
- PciDisableCommandRegister (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);
-
- }
-
- //
- // Start to parse the bars
- //
- for (Offset = 0x10, BarIndex = 0; Offset <= 0x24; BarIndex++) {
- Offset = PciParseBar (PciIoDevice, Offset, BarIndex);
- }
-
- return PciIoDevice;
-}
-
-PCI_IO_DEVICE *
-GatherPPBInfo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- PCI_IO_DEVICE *PciIoDevice;
- EFI_STATUS Status;
- UINT8 Value;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINT8 Temp;
-
- PciIoDevice = CreatePciIoDevice (
- PciRootBridgeIo,
- Pci,
- Bus,
- Device,
- Func
- );
-
- if (!PciIoDevice) {
- return NULL;
- }
-
- if (gFullEnumeration) {
- PciDisableCommandRegister (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);
-
- //
- // Initalize the bridge control register
- //
- PciDisableBridgeControlRegister (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_BITS_OWNED);
- }
-
- PciIo = &PciIoDevice->PciIo;
-
- //
- // Test whether it support 32 decode or not
- //
- PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne);
- PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);
-
- if (Value) {
- if (Value & 0x01) {
- PciIoDevice->Decodes |= EFI_BRIDGE_IO32_DECODE_SUPPORTED;
- } else {
- PciIoDevice->Decodes |= EFI_BRIDGE_IO16_DECODE_SUPPORTED;
- }
- }
-
- Status = BarExisted (
- PciIoDevice,
- 0x24,
- NULL,
- NULL
- );
-
- //
- // test if it supports 64 memory or not
- //
- if (!EFI_ERROR (Status)) {
-
- Status = BarExisted (
- PciIoDevice,
- 0x28,
- NULL,
- NULL
- );
-
- if (!EFI_ERROR (Status)) {
- PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED;
- PciIoDevice->Decodes |= EFI_BRIDGE_PMEM64_DECODE_SUPPORTED;
- } else {
- PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED;
- }
- }
-
- //
- // Memory 32 code is required for ppb
- //
- PciIoDevice->Decodes |= EFI_BRIDGE_MEM32_DECODE_SUPPORTED;
-
- return PciIoDevice;
-}
-
-PCI_IO_DEVICE *
-GatherP2CInfo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- PCI_IO_DEVICE *PciIoDevice;
-
- PciIoDevice = CreatePciIoDevice (
- PciRootBridgeIo,
- Pci,
- Bus,
- Device,
- Func
- );
-
- if (!PciIoDevice) {
- return NULL;
- }
-
- if (gFullEnumeration) {
- PciDisableCommandRegister (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);
-
- //
- // Initalize the bridge control register
- //
- PciDisableBridgeControlRegister (PciIoDevice, EFI_PCCARD_BRIDGE_CONTROL_BITS_OWNED);
-
- }
- //
- // P2C only has one bar that is in 0x10
- //
- PciParseBar(PciIoDevice, 0x10, 0);
-
- PciIoDevice->Decodes = EFI_BRIDGE_MEM32_DECODE_SUPPORTED |
- EFI_BRIDGE_PMEM32_DECODE_SUPPORTED |
- EFI_BRIDGE_IO32_DECODE_SUPPORTED;
-
- return PciIoDevice;
-}
-
-EFI_DEVICE_PATH_PROTOCOL *
-CreatePciDevicePath (
- IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,
- IN PCI_IO_DEVICE *PciIoDevice
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
-
- PCI_DEVICE_PATH PciNode;
-
- //
- // Create PCI device path
- //
- PciNode.Header.Type = HARDWARE_DEVICE_PATH;
- PciNode.Header.SubType = HW_PCI_DP;
- SetDevicePathNodeLength (&PciNode.Header, sizeof (PciNode));
-
- PciNode.Device = PciIoDevice->DeviceNumber;
- PciNode.Function = PciIoDevice->FunctionNumber;
- PciIoDevice->DevicePath = AppendDevicePathNode (ParentDevicePath, &PciNode.Header);
-
- return PciIoDevice->DevicePath;
-}
-
-EFI_STATUS
-BarExisted (
- IN PCI_IO_DEVICE *PciIoDevice,
- IN UINTN Offset,
- OUT UINT32 *BarLengthValue,
- OUT UINT32 *OriginalBarValue
- )
-/*++
-
-Routine Description:
-
- Check the bar is existed or not.
-
-Arguments:
-
- PciIoDevice - A pointer to the PCI_IO_DEVICE.
- Offset - The offset.
- BarLengthValue - The bar length value.
- OriginalBarValue - The original bar value.
-
-Returns:
-
- EFI_NOT_FOUND - The bar don't exist.
- EFI_SUCCESS - The bar exist.
-
---*/
-{
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINT32 OriginalValue;
- UINT32 Value;
- EFI_TPL OldTpl;
-
- PciIo = &PciIoDevice->PciIo;
-
- //
- // Preserve the original value
- //
-
- PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue);
-
- //
- // Raise TPL to high level to disable timer interrupt while the BAR is probed
- //
- OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &gAllOne);
- PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &Value);
-
- //
- // Write back the original value
- //
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue);
-
- //
- // Restore TPL to its original level
- //
- gBS->RestoreTPL (OldTpl);
-
- if (BarLengthValue != NULL) {
- *BarLengthValue = Value;
- }
-
- if (OriginalBarValue != NULL) {
- *OriginalBarValue = OriginalValue;
- }
-
- if (Value == 0) {
- return EFI_NOT_FOUND;
- } else {
- return EFI_SUCCESS;
- }
-}
-
-
-EFI_STATUS
-DetermineDeviceAttribute (
- IN PCI_IO_DEVICE *PciIoDevice
- )
-/*++
-
-Routine Description:
-
- Determine the related attributes of all devices under a Root Bridge
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- UINT16 Command;
- UINT16 BridgeControl;
-
- Command = 0;
-
- PciIoDevice->Supports |= EFI_PCI_DEVICE_ENABLE;
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE;
-
- if (IS_PCI_VGA (&(PciIoDevice->Pci))){
-
- //
- // If the device is VGA, VGA related Attributes are supported
- //
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO ;
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY ;
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_VGA_IO ;
- }
-
- if(IS_ISA_BRIDGE(&(PciIoDevice->Pci)) || IS_INTEL_ISA_BRIDGE(&(PciIoDevice->Pci))) {
- //
- // If the devie is a ISA Bridge, set the two attributes
- //
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO;
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_ISA_IO;
- }
-
- if (IS_PCI_GFX (&(PciIoDevice->Pci))) {
-
- //
- // If the device is GFX, then only set the EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO
- // attribute
- //
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO ;
- }
-
-
- //
- // If the device is IDE, IDE related attributes are supported
- //
- if (IS_PCI_IDE (&(PciIoDevice->Pci))) {
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO ;
- PciIoDevice->Supports |= EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO ;
- }
-
- PciReadCommandRegister(PciIoDevice, &Command);
-
-
- if (Command & EFI_PCI_COMMAND_IO_SPACE) {
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_IO;
- }
-
- if (Command & EFI_PCI_COMMAND_MEMORY_SPACE) {
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_MEMORY;
- }
-
- if (Command & EFI_PCI_COMMAND_BUS_MASTER) {
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_BUS_MASTER;
- }
-
- if (IS_PCI_BRIDGE (&(PciIoDevice->Pci)) ||
- IS_CARDBUS_BRIDGE (&(PciIoDevice->Pci))){
-
- //
- // If it is a PPB, read the Bridge Control Register to determine
- // the relevant attributes
- //
- BridgeControl = 0;
- PciReadBridgeControlRegister(PciIoDevice, &BridgeControl);
-
- //
- // Determine whether the ISA bit is set
- // If ISA Enable on Bridge is set, the PPB
- // will block forwarding 0x100-0x3ff for each 1KB in the
- // first 64KB I/O range.
- //
- if ((BridgeControl & EFI_PCI_BRIDGE_CONTROL_ISA) != 0) {
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_IO;
- }
-
- //
- // Determine whether the VGA bit is set
- // If it is set, the bridge is set to decode VGA memory range
- // and palette register range
- //
- if (IS_PCI_VGA (&(PciIoDevice->Pci)) &&BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA) {
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO;
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY;
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO;
- }
-
- //
- // if the palette snoop bit is set, then the brige is set to
- // decode palette IO write
- //
- if (Command & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) {
- PciIoDevice->Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-UINTN
-PciParseBar (
- IN PCI_IO_DEVICE *PciIoDevice,
- IN UINTN Offset,
- IN UINTN BarIndex
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- UINT32 Value;
- UINT32 OriginalValue;
- UINT32 Mask;
- EFI_STATUS Status;
-
- OriginalValue = 0;
- Value = 0;
-
- Status = BarExisted (
- PciIoDevice,
- Offset,
- &Value,
- &OriginalValue
- );
-
- if (EFI_ERROR (Status)) {
- PciIoDevice->PciBar[BarIndex].BaseAddress = 0;
- PciIoDevice->PciBar[BarIndex].Length = 0;
- PciIoDevice->PciBar[BarIndex].Alignment = 0;
-
- //
- // Some devices don't fully comply to PCI spec 2.2. So be to scan all the BARs anyway
- //
- PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset;
- return Offset + 4;
- }
-
- PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset;
- if (Value & 0x01) {
- //
- // Device I/Os
- //
- Mask = 0xfffffffc;
-
- if (Value & 0xFFFF0000) {
- //
- // It is a IO32 bar
- //
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeIo32;
- PciIoDevice->PciBar[BarIndex].Length = ((~(Value & Mask)) + 1);
- PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
-
- } else {
- //
- // It is a IO16 bar
- //
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeIo16;
- PciIoDevice->PciBar[BarIndex].Length = 0x0000FFFF & ((~(Value & Mask)) + 1);
- PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
-
- }
- //
- // Workaround. Some platforms inplement IO bar with 0 length
- // Need to treat it as no-bar
- //
- if (PciIoDevice->PciBar[BarIndex].Length == 0) {
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown;
- }
-
- PciIoDevice->PciBar[BarIndex].Prefetchable = FALSE;
- PciIoDevice->PciBar[BarIndex].BaseAddress = OriginalValue & Mask;
-
- } else {
-
- Mask = 0xfffffff0;
-
- PciIoDevice->PciBar[BarIndex].BaseAddress = OriginalValue & Mask;
-
- switch (Value & 0x07) {
-
- //
- //memory space; anywhere in 32 bit address space
- //
- case 0x00:
- if (Value & 0x08) {
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem32;
- } else {
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem32;
- }
-
- PciIoDevice->PciBar[BarIndex].Length = (~(Value & Mask)) + 1;
- PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
-
- break;
-
- //
- // memory space; anywhere in 64 bit address space
- //
- case 0x04:
- if (Value & 0x08) {
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem64;
- } else {
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem64;
- }
-
- //
- // According to PCI 2.2,if the bar indicates a memory 64 decoding, next bar
- // is regarded as an extension for the first bar. As a result
- // the sizing will be conducted on combined 64 bit value
- // Here just store the masked first 32bit value for future size
- // calculation
- //
- PciIoDevice->PciBar[BarIndex].Length = Value & Mask;
- PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
-
- //
- // Increment the offset to point to next DWORD
- //
- Offset += 4;
-
- Status = BarExisted (
- PciIoDevice,
- Offset,
- &Value,
- &OriginalValue
- );
-
- if (EFI_ERROR (Status)) {
- return Offset + 4;
- }
-
- //
- // Fix the length to support some spefic 64 bit BAR
- //
- Value |= ((UINT32)(-1) << HighBitSet32 (Value));
-
- //
- // Calculate the size of 64bit bar
- //
- PciIoDevice->PciBar[BarIndex].BaseAddress |= LShiftU64 ((UINT64) OriginalValue, 32);
-
- PciIoDevice->PciBar[BarIndex].Length = PciIoDevice->PciBar[BarIndex].Length | LShiftU64 ((UINT64) Value, 32);
- PciIoDevice->PciBar[BarIndex].Length = (~(PciIoDevice->PciBar[BarIndex].Length)) + 1;
- PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
-
- break;
-
- //
- // reserved
- //
- default:
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown;
- PciIoDevice->PciBar[BarIndex].Length = (~(Value & Mask)) + 1;
- PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;
-
- break;
- }
- }
-
- //
- // Check the length again so as to keep compatible with some special bars
- //
- if (PciIoDevice->PciBar[BarIndex].Length == 0) {
- PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown;
- PciIoDevice->PciBar[BarIndex].BaseAddress = 0;
- PciIoDevice->PciBar[BarIndex].Alignment = 0;
- }
-
- //
- // Increment number of bar
- //
- return Offset + 4;
-}
-
-EFI_STATUS
-InitializePPB (
- IN PCI_IO_DEVICE *PciIoDevice
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- EFI_PCI_IO_PROTOCOL *PciIo;
-
- PciIo = &(PciIoDevice->PciIo);
-
- //
- // Put all the resource apertures including IO16
- // Io32, pMem32, pMem64 to quiescent state
- // Resource base all ones, Resource limit all zeros
- //
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1D, 1, &gAllZero);
-
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x20, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x22, 1, &gAllZero);
-
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x24, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x26, 1, &gAllZero);
-
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x2C, 1, &gAllZero);
-
- //
- // don't support use io32 as for now
- //
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x30, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x32, 1, &gAllZero);
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-InitializeP2C (
- IN PCI_IO_DEVICE *PciIoDevice
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
- EFI_PCI_IO_PROTOCOL *PciIo;
-
- PciIo = &(PciIoDevice->PciIo);
-
- //
- // Put all the resource apertures including IO16
- // Io32, pMem32, pMem64 to quiescent state(
- // Resource base all ones, Resource limit all zeros
- //
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x1c, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x20, 1, &gAllZero);
-
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x24, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllZero);
-
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x2c, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x30, 1, &gAllZero);
-
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x34, 1, &gAllOne);
- PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x38, 1, &gAllZero);
-
- return EFI_SUCCESS;
-}
-
-PCI_IO_DEVICE *
-CreatePciIoDevice (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,
- IN PCI_TYPE00 *Pci,
- UINT8 Bus,
- UINT8 Device,
- UINT8 Func
- )
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
-
- EFI_STATUS Status;
- PCI_IO_DEVICE *PciIoDevice;
-
- PciIoDevice = NULL;
-
- Status = gBS->AllocatePool (
- EfiBootServicesData,
- sizeof (PCI_IO_DEVICE),
- (VOID **) &PciIoDevice
- );
-
- if (EFI_ERROR (Status)) {
- return NULL;
- }
-
- ZeroMem (PciIoDevice, sizeof (PCI_IO_DEVICE));
-
- PciIoDevice->Signature = PCI_IO_DEVICE_SIGNATURE;
- PciIoDevice->Handle = NULL;
- PciIoDevice->PciRootBridgeIo = PciRootBridgeIo;
- PciIoDevice->DevicePath = NULL;
- PciIoDevice->BusNumber = Bus;
- PciIoDevice->DeviceNumber = Device;
- PciIoDevice->FunctionNumber = Func;
- PciIoDevice->Decodes = 0;
- if (gFullEnumeration) {
- PciIoDevice->Allocated = FALSE;
- } else {
- PciIoDevice->Allocated = TRUE;
- }
-
- PciIoDevice->Attributes = 0;
- PciIoDevice->Supports = 0;
- PciIoDevice->BusOverride = FALSE;
- PciIoDevice->IsPciExp = FALSE;
-
- CopyMem (&(PciIoDevice->Pci), Pci, sizeof (PCI_TYPE01));
-
- //
- // Initialize the PCI I/O instance structure
- //
-
- Status = InitializePciIoInstance (PciIoDevice);
- Status = InitializePciDriverOverrideInstance (PciIoDevice);
-
- if (EFI_ERROR (Status)) {
- gBS->FreePool (PciIoDevice);
- return NULL;
- }
-
- //
- // Initialize the reserved resource list
- //
- InitializeListHead (&PciIoDevice->ReservedResourceList);
-
- //
- // Initialize the driver list
- //
- InitializeListHead (&PciIoDevice->OptionRomDriverList);
-
- //
- // Initialize the child list
- //
- InitializeListHead (&PciIoDevice->ChildList);
-
- return PciIoDevice;
-}
-
-EFI_STATUS
-PciEnumeratorLight (
- IN EFI_HANDLE Controller
- )
-/*++
-
-Routine Description:
-
- This routine is used to enumerate entire pci bus system
- in a given platform
-
-Arguments:
-
-Returns:
-
- None
-
---*/
-{
-
- EFI_STATUS Status;
- EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo;
- PCI_IO_DEVICE *RootBridgeDev;
- UINT16 MinBus;
- UINT16 MaxBus;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptors;
-
- MinBus = 0;
- MaxBus = PCI_MAX_BUS;
- Descriptors = NULL;
-
- //
- // If this host bridge has been already enumerated, then return successfully
- //
- if (RootBridgeExisted (Controller)) {
- return EFI_SUCCESS;
- }
-
- //
- // Open the IO Abstraction(s) needed to perform the supported test
- //
- Status = gBS->OpenProtocol (
- Controller ,
- &gEfiDevicePathProtocolGuid,
- (VOID **)&ParentDevicePath,
- gPciBusDriverBinding.DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
- return Status;
- }
-
- //
- // Open pci root bridge io protocol
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiPciRootBridgeIoProtocolGuid,
- (VOID **) &PciRootBridgeIo,
- gPciBusDriverBinding.DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
- return Status;
- }
-
- //
- // Load all EFI Drivers from all PCI Option ROMs behind the PCI Root Bridge
- //
- Status = PciRomLoadEfiDriversFromOptionRomTable (&gPciBusDriverBinding, PciRootBridgeIo);
-
- Status = PciRootBridgeIo->Configuration (PciRootBridgeIo, (VOID **) &Descriptors);
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- while (PciGetBusRange (&Descriptors, &MinBus, &MaxBus, NULL) == EFI_SUCCESS) {
-
- //
- // Create a device node for root bridge device with a NULL host bridge controller handle
- //
- RootBridgeDev = CreateRootBridge (Controller);
-
- //
- // Record the root bridge device path
- //
- RootBridgeDev->DevicePath = ParentDevicePath;
-
- //
- // Record the root bridge io protocol
- //
- RootBridgeDev->PciRootBridgeIo = PciRootBridgeIo;
-
- Status = PciPciDeviceInfoCollector (
- RootBridgeDev,
- (UINT8) MinBus
- );
-
- if (!EFI_ERROR (Status)) {
-
- //
- // If successfully, insert the node into device pool
- //
- InsertRootBridge (RootBridgeDev);
- } else {
-
- //
- // If unsuccessly, destroy the entire node
- //
- DestroyRootBridge (RootBridgeDev);
- }
-
- Descriptors++;
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-PciGetBusRange (
- IN EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR **Descriptors,
- OUT UINT16 *MinBus,
- OUT UINT16 *MaxBus,
- OUT UINT16 *BusRange
- )
-/*++
-
-Routine Description:
-
- Get the bus range.
-
-Arguments:
-
- Descriptors - A pointer to the address space descriptor.
- MinBus - The min bus.
- MaxBus - The max bus.
- BusRange - The bus range.
-
-Returns:
-
- Status Code.
-
---*/
-{
-
- while ((*Descriptors)->Desc != ACPI_END_TAG_DESCRIPTOR) {
- if ((*Descriptors)->ResType == ACPI_ADDRESS_SPACE_TYPE_BUS) {
- if (MinBus != NULL) {
- *MinBus = (UINT16)(*Descriptors)->AddrRangeMin;
- }
-
- if (MaxBus != NULL) {
- *MaxBus = (UINT16)(*Descriptors)->AddrRangeMax;
- }
-
- if (BusRange != NULL) {
- *BusRange = (UINT16)(*Descriptors)->AddrLen;
- }
- return EFI_SUCCESS;
- }
-
- (*Descriptors)++;
- }
-
- return EFI_NOT_FOUND;
-}
-
|