diff options
Diffstat (limited to 'DuetPkg')
-rw-r--r-- | DuetPkg/CpuDxe/Cpu.inf | 1 | ||||
-rw-r--r-- | DuetPkg/CpuDxe/Ia32/CpuInterrupt.S | 717 |
2 files changed, 718 insertions, 0 deletions
diff --git a/DuetPkg/CpuDxe/Cpu.inf b/DuetPkg/CpuDxe/Cpu.inf index 1498d4d28d..e9e5fbf388 100644 --- a/DuetPkg/CpuDxe/Cpu.inf +++ b/DuetPkg/CpuDxe/Cpu.inf @@ -40,6 +40,7 @@ [Sources.IA32]
Ia32/CpuInterrupt.asm |INTEL
Ia32/CpuInterrupt.asm |MSFT
+ Ia32/CpuInterrupt.S |GCC ## It can be compiled and linked now. But its logic has not been assured yet.
[Sources.X64]
X64/CpuInterrupt.asm | INTEL
diff --git a/DuetPkg/CpuDxe/Ia32/CpuInterrupt.S b/DuetPkg/CpuDxe/Ia32/CpuInterrupt.S new file mode 100644 index 0000000000..120669a479 --- /dev/null +++ b/DuetPkg/CpuDxe/Ia32/CpuInterrupt.S @@ -0,0 +1,717 @@ +/** @file
+ *
+ * Copyright 2006, Intel Corporation
+ * All rights reserved. This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ * CpuInterrupt.S
+ *
+ * Abstract:
+ *
+ **/
+
+.globl ASM_PFX(SystemTimerHandler)
+.globl ASM_PFX(SystemExceptionHandler)
+.globl ASM_PFX(mExceptionCodeSize)
+.globl ASM_PFX(InitDescriptor)
+.globl ASM_PFX(InstallInterruptHandler)
+
+ASM_PFX(mExceptionCodeSize): .long 9
+
+/**
+ * VOID
+ * InitDescriptor (
+ * VOID
+ * )
+ **/
+ASM_PFX(InitDescriptor):
+ lgdt gdtr
+ lidt idtr
+ ret
+
+/**
+ * VOID
+ * InstallInterruptHandler (
+ * UINTN Vector,
+ * VOID (*Handler)(VOID)
+ * )
+ **/
+ASM_PFX(InstallInterruptHandler):
+ movl %esp, %ebp
+ pushl %edi
+ pushfl # save eflags
+ cli # turn off interrupts
+ subl $6, %esp # open some space on the stack
+ movl %esp, %edi
+ sidt %es:(%edi) # get fword address of IDT
+ movl %es:2(%edi), %edi # move offset of IDT into EDI
+ addl $6, %esp # correct stack
+ mov 4(%ebp), %eax # Get vector number
+ shll $3, %eax # multiply by 8 to get offset
+ addl %eax, %edi # add to IDT base to get entry
+ movl 8(%ebp), %eax # load new address into IDT entry
+ movw %ax, %es:(%edi) # write bits 15..0 of offset
+ shrl $16, %eax # use ax to copy 31..16 to descriptors
+ movw %ax, %es:6(%edi) # write bits 31..16 of offset
+ popfl # restore flags (possible enabling interrupts)
+ pop %edi
+ ret
+
+.macro JmpCommonIdtEntry errno, vector
+ /* jmp commonIdtEntry - this must be hand coded to keep the assembler from
+ * using a 8 bit reletive jump when the entries are
+ * within 255 bytes of the common entry. This must
+ * be done to maintain the consistency of the size
+ * of entry points...
+ */
+ pushl \errno
+ pushl \vector
+ #.byte 0e9h # jmp 16 bit reletive
+ #.long commonIdtEntry - $ - $4 # offset to jump to
+ jmpl *commonIdtEntry
+.endm
+
+.align 0x02
+ASM_PFX(SystemExceptionHandler):
+INT0:
+ JmpCommonIdtEntry errno=0,vector=0
+INT1:
+ JmpCommonIdtEntry errno=0,vector=1
+INT2:
+ JmpCommonIdtEntry errno=0,vector=2
+INT3:
+ JmpCommonIdtEntry errno=0,vector=3
+INT4:
+ JmpCommonIdtEntry errno=0,vector=4
+INT5:
+ JmpCommonIdtEntry errno=0,vector=5
+INT6:
+ JmpCommonIdtEntry errno=0,vector=6
+INT7:
+ JmpCommonIdtEntry errno=0,vector=7
+INT8:
+# Double fault causes an error code to be pushed so no phony pushl necessary
+ nop
+ nop
+ pushl $8
+ jmpl *commonIdtEntry
+INT9:
+ JmpCommonIdtEntry errno=0,vector=9
+INT10:
+# Invalid TSS causes an error code to be pushed so no phony pushl necessary
+ nop
+ nop
+ pushl $10
+ jmpl *commonIdtEntry
+INT11:
+# Segment Not Present causes an error code to be pushed so no phony pushl necessary
+ nop
+ nop
+ pushl $11
+ jmpl *commonIdtEntry
+INT12:
+# Stack fault causes an error code to be pushed so no phony pushl necessary
+ nop
+ nop
+ pushl $12
+ jmpl *commonIdtEntry
+INT13:
+# GP fault causes an error code to be pushed so no phony pushl necessary
+ nop
+ nop
+ pushl $13
+ jmpl *commonIdtEntry
+INT14:
+# Page fault causes an error code to be pushed so no phony pushl necessary
+ nop
+ nop
+ pushl $14
+ jmpl *commonIdtEntry
+INT15:
+ JmpCommonIdtEntry errno=0,vector=15
+INT16:
+ JmpCommonIdtEntry errno=0,vector=16
+INT17:
+# Alignment check causes an error code to be pushed so no phony pushl necessary
+ nop
+ nop
+ pushl $17
+ jmpl *commonIdtEntry
+INT18:
+ JmpCommonIdtEntry errno=0,vector=18
+INT19:
+ JmpCommonIdtEntry errno=0,vector=19
+INTUnknown:
+ JmpCommonIdtEntry errno=0,vector=20
+ JmpCommonIdtEntry errno=0,vector=21
+ JmpCommonIdtEntry errno=0,vector=22
+ JmpCommonIdtEntry errno=0,vector=23
+ JmpCommonIdtEntry errno=0,vector=24
+ JmpCommonIdtEntry errno=0,vector=25
+ JmpCommonIdtEntry errno=0,vector=26
+ JmpCommonIdtEntry errno=0,vector=27
+ JmpCommonIdtEntry errno=0,vector=28
+ JmpCommonIdtEntry errno=0,vector=29
+ JmpCommonIdtEntry errno=0,vector=30
+ JmpCommonIdtEntry errno=0,vector=31
+
+ASM_PFX(SystemTimerHandler):
+ JmpCommonIdtEntry errno=0,vector=ASM_PFX(mTimerVector)
+
+commonIdtEntry:
+# +---------------------+
+# + EFlags +
+# +---------------------+
+# + CS +
+# +---------------------+
+# + EIP +
+# +---------------------+
+# + Error Code +
+# +---------------------+
+# + Vector Number +
+# +---------------------+
+# + EBP +
+# +---------------------+ <-- EBP
+
+ cli
+ pushl %ebp
+ movl %esp, %ebp
+
+ #
+ # Align stack to make sure that EFI_FX_SAVE_STATE_IA32 of EFI_SYSTEM_CONTEXT_IA32
+ # is 16-byte aligned
+ #
+ andl $0xfffffff0, %esp
+ subl $12, %esp
+
+## UINT32 Edi, Esi, Ebp, Esp, Ebx, Edx, Ecx, Eax#
+ pushl %eax
+ pushl %ecx
+ pushl %edx
+ pushl %ebx
+ leal 24(%ebp), %ecx
+ pushl %ecx # ESP
+ pushl (%ebp) # EBP
+ pushl %esi
+ pushl %edi
+
+## UINT32 Gs, Fs, Es, Ds, Cs, Ss#
+ movl %ss, %eax
+ pushl %eax
+ movzwl 16(%ebp), %eax
+ pushl %eax
+ movl %ds, %eax
+ pushl %eax
+ movl %es, %eax
+ pushl %eax
+ movl %fs, %eax
+ pushl %eax
+ movl %gs, %eax
+ pushl %eax
+
+## UINT32 Eip#
+ pushl 12(%ebp)
+
+## UINT32 Gdtr[2], Idtr[2]#
+ subl $8, %esp
+ sidt (%esp)
+ subl $8, %esp
+ sgdt (%esp)
+
+## UINT32 Ldtr, Tr#
+ xorl %eax, %eax
+ strw %ax
+ pushl %eax
+ sldt %ax
+ pushl %eax
+
+## UINT32 EFlags#
+ pushl 5*4(%ebp)
+
+## UINT32 Cr0, Cr1, Cr2, Cr3, Cr4#
+ movl %cr4, %eax
+ orl $0x208, %eax
+ movl %eax, %cr4
+ pushl %eax
+ movl %cr3, %eax
+ pushl %eax
+ movl %cr2, %eax
+ pushl %eax
+ xorl %eax, %eax
+ pushl %eax
+ movl %cr0, %eax
+ pushl %eax
+
+## UINT32 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7#
+ movl %dr7, %eax
+ pushl %eax
+## clear Dr7 while executing debugger itself
+ xorl %eax, %eax
+ movl %eax, %dr7
+
+ movl %dr6, %eax
+ pushl %eax
+## insure all status bits in dr6 are clear...
+ xorl %eax, %eax
+ movl %eax, %dr6
+
+ movl %dr3, %eax
+ pushl %eax
+ movl %dr2, %eax
+ pushl %eax
+ movl %dr1, %eax
+ pushl %eax
+ movl %dr0, %eax
+ pushl %eax
+
+## FX_SAVE_STATE_IA32 FxSaveState#
+ subl $512, %esp
+ movl %esp, %edi
+ #.byte 0f, 0ae, 00000111y #fxsave [edi]
+ fxsave (%edi)
+
+## UINT32 ExceptionData#
+ pushl 2*4(%ebp)
+
+## Prepare parameter and call
+ movl %esp, %edx
+ pushl %edx
+ movl 1*4(%ebp), %eax
+ pushl %eax
+ cmpl $32, %eax
+ jb CallException
+ call ASM_PFX(TimerHandler)
+ jmp ExceptionDone
+CallException:
+ call ASM_PFX(ExceptionHandler)
+ExceptionDone:
+ addl $8, %esp
+
+ cli
+## UINT32 ExceptionData#
+ addl $4, %esp
+
+## FX_SAVE_STATE_IA32 FxSaveState#
+ movl %esp, %esi
+ #db 0fh, 0aeh, 00001110y # fxrstor [esi]
+ fxrstor (%esi)
+ addl $512, %esp
+
+## UINT32 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7#
+ popl %eax
+ movl %eax, %dr0
+ popl %eax
+ movl %eax, %dr1
+ popl %eax
+ movl %eax, %dr2
+ popl %eax
+ movl %eax, %dr3
+## skip restore of dr6. We cleared dr6 during the context save.
+ addl $4, %esp
+ popl %eax
+ movl %eax, %dr7
+
+## UINT32 Cr0, Cr1, Cr2, Cr3, Cr4#
+ popl %eax
+ movl %eax, %cr0
+ addl $4, %esp # not for Cr1
+ popl %eax
+ movl %eax, %cr2
+ popl %eax
+ movl %eax, %cr3
+ popl %eax
+ movl %eax, %cr4
+
+## UINT32 EFlags#
+ popl 5*4(%ebp)
+
+## UINT32 Ldtr, Tr#
+## UINT32 Gdtr[2], Idtr[2]#
+## Best not let anyone mess with these particular registers...
+ addl $24, %esp
+
+## UINT32 Eip#
+ popl 3*4(%ebp)
+
+## UINT32 Gs, Fs, Es, Ds, Cs, Ss#
+## NOTE - modified segment registers could hang the debugger... We
+## could attempt to insulate ourselves against this possibility,
+## but that poses risks as well.
+##
+ popl %gs
+ popl %fs
+ popl %es
+ popl %ds
+ popl 4*4(%ebp)
+ popl %ss
+
+## UINT32 Edi, Esi, Ebp, Esp, Ebx, Edx, Ecx, Eax#
+ popl %edi
+ popl %esi
+ addl $4, %esp # not for ebp
+ addl $4, %esp # not for esp
+ popl %ebx
+ popl %edx
+ popl %ecx
+ popl %eax
+
+ movl %ebp, %esp
+ popl %ebp
+ addl $8, %esp
+ iretl
+
+
+##############################################################################
+# data
+##############################################################################
+
+.align 2, 0x0
+gdtr:
+ .word 8*8 - 1
+ .long GDT_BASE
+
+##############################################################################
+# global descriptor table (GDT)
+##############################################################################
+
+
+.align 2, 0x90
+GDT_BASE:
+ .quad 0x0 // null descriptor
+ .quad 0x00cf92000000ffff // linear data segment descriptor
+ .quad 0x00cf9a000000ffff // linear code segment descriptor
+ .quad 0x00cf92000000ffff // system data segment descriptor
+ .quad 0x00cf9a000000ffff // system code segment descriptor
+ .quad 0x0 // spare segment descriptor
+ .quad 0x0
+ .quad 0x0
+
+.align 0x02
+
+idtr:
+ .word IDT_END - IDT_BASE - 1 # IDT limit
+ .long IDT_BASE
+
+##############################################################################
+# interrupt descriptor table (IDT)
+#
+# Note: The hardware IRQ's specified in this table are the normal PC/AT IRQ
+# mappings. This implementation only uses the system timer and all other
+# IRQs will remain masked. The descriptors for vectors 33+ are provided
+# for convenience.
+##############################################################################
+
+.align 0x02
+
+IDT_BASE:
+ .skip 256 * 16
+
+/**
+# divide by zero (INT 0)
+DIV_ZERO_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# debug exception (INT 1)
+DEBUG_EXCEPT_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# NMI (INT 2)
+NMI_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# soft breakpoint (INT 3)
+BREAKPOINT_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# overflow (INT 4)
+OVERFLOW_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# bounds check (INT 5)
+BOUNDS_CHECK_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# invalid opcode (INT 6)
+INVALID_OPCODE_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# device not available (INT 7)
+DEV_NOT_AVAIL_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# double fault (INT 8)
+DOUBLE_FAULT_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# Coprocessor segment overrun - reserved (INT 9)
+RSVD_INTR_SEL1 equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# invalid TSS (INT 0ah)
+INVALID_TSS_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# segment not present (INT 0bh)
+SEG_NOT_PRESENT_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# stack fault (INT 0ch)
+STACK_FAULT_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# general protection (INT 0dh)
+GP_FAULT_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# page fault (INT 0eh)
+PAGE_FAULT_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# Intel reserved - do not use (INT 0fh)
+RSVD_INTR_SEL2 equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# floating point error (INT 10h)
+FLT_POINT_ERR_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# alignment check (INT 11h)
+ALIGNMENT_CHECK_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# machine check (INT 12h)
+MACHINE_CHECK_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# SIMD floating-point exception (INT 13h)
+SIMD_EXCEPTION_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+REPEAT (32 - 20)
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+ENDM
+
+# 72 unspecified descriptors
+ db (72 * 8) dup(0)
+
+# IRQ 0 (System timer) - (INT 68h)
+IRQ0_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 1 (8042 Keyboard controller) - (INT 69h)
+IRQ1_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# Reserved - IRQ 2 redirect (IRQ 2) - DO NOT USE!!! - (INT 6ah)
+IRQ2_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 3 (COM 2) - (INT 6bh)
+IRQ3_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 4 (COM 1) - (INT 6ch)
+IRQ4_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 5 (LPT 2) - (INT 6dh)
+IRQ5_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 6 (Floppy controller) - (INT 6eh)
+IRQ6_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 7 (LPT 1) - (INT 6fh)
+IRQ7_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 8 (RTC Alarm) - (INT 70h)
+IRQ8_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 9 - (INT 71h)
+IRQ9_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 10 - (INT 72h)
+IRQ10_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 11 - (INT 73h)
+IRQ11_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 12 (PS/2 mouse) - (INT 74h)
+IRQ12_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 13 (Floating point error) - (INT 75h)
+IRQ13_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 14 (Secondary IDE) - (INT 76h)
+IRQ14_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+# IRQ 15 (Primary IDE) - (INT 77h)
+IRQ15_SEL equ $-IDT_BASE
+ dw 0 # offset 15:0
+ dw SYS_CODE_SEL # selector 15:0
+ db 0 # 0 for interrupt gate
+ db 0eh OR 80h # (10001110)type = 386 interrupt gate, present
+ dw 0 # offset 31:16
+
+ db (1 * 8) dup(0)
+
+**/
+IDT_END:
|