diff options
Diffstat (limited to 'EdkCompatibilityPkg/Sample/Platform/Common.dsc')
-rw-r--r-- | EdkCompatibilityPkg/Sample/Platform/Common.dsc | 1762 |
1 files changed, 0 insertions, 1762 deletions
diff --git a/EdkCompatibilityPkg/Sample/Platform/Common.dsc b/EdkCompatibilityPkg/Sample/Platform/Common.dsc deleted file mode 100644 index be582eec68..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Common.dsc +++ /dev/null @@ -1,1762 +0,0 @@ -#/*++
-#
-# Copyright (c) 2004 - 2010, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# Common.dsc
-#
-# Abstract:
-#
-# This is the build description file containing the platform
-# independent build instructions. Platform specific instructions will
-# be prepended to produce the final build DSC file.
-#
-#
-# Notes:
-#
-# The info in this file is broken down into sections. The start of a section
-# is designated by a "[" in the first column. So the [=====] separater ends
-# a section.
-#
-#--*/
-
-[=============================================================================]
-#
-# These get emitted at the top of the generated master makefile.
-#
-[=============================================================================]
-[Makefile.out]
-#
-# From the [makefile.out] section of the DSC file
-#
-TOOLCHAIN =
-MAKE = nmake -nologo
-
-!INCLUDE $(BUILD_DIR)\PlatformTools.env
-
-all : libraries fvs
-
-[=============================================================================]
-#
-# These get expanded and dumped out to each component makefile after the
-# component INF [defines] section gets parsed.
-#
-[=============================================================================]
-[Makefile.Common]
-#
-# From the [Makefile.Common] section of the description file.
-#
-PROCESSOR = $(PROCESSOR)
-BASE_NAME = $(BASE_NAME)
-BUILD_NUMBER = $(BUILD_NUMBER)
-VERSION_STRING = $(VERSION_STRING)
-TOOLCHAIN = TOOLCHAIN_$(PROCESSOR)
-FILE_GUID = $(FILE_GUID)
-COMPONENT_TYPE = $(COMPONENT_TYPE)
-FV_DIR = $(BUILD_DIR)\FV
-PLATFORM = $(PROJECT_NAME)
-
-#
-# Define the global dependency files
-#
-!IF EXIST ($(DEST_DIR)\$(BASE_NAME)StrDefs.h)
-INC_DEPS = $(INC_DEPS) $(DEST_DIR)\$(BASE_NAME)StrDefs.h
-!ENDIF
-#ENV_DEPS = $(ENV_DEPS) $(EDK_SOURCE)\Sample\CommonTools.env
-#ENV_DEPS = $(ENV_DEPS) $(BUILD_DIR)\PlatformTools.env
-#ENV_DEPS = $(ENV_DEPS) $(BUILD_DIR)\Config.env
-ALL_DEPS = $(INC_DEPS) $(ENV_DEPS)
-
-!IF "$(LANGUAGE)" != ""
-LANGUAGE_FLAGS = -lang $(LANGUAGE)
-!ENDIF
-
-!INCLUDE $(BUILD_DIR)\PlatformTools.env
-
-!IF "$(COMPONENT_TYPE)" == "PIC_PEIM" || "$(COMPONENT_TYPE)" == "PE32_PEIM" || "$(COMPONENT_TYPE)" == "RELOCATABLE_PEIM" || "$(COMPONENT_TYPE)" == "COMBINED_PEIM_DRIVER"
-DEPEX_TYPE = EFI_SECTION_PEI_DEPEX
-!ELSE
-DEPEX_TYPE = EFI_SECTION_DXE_DEPEX
-!ENDIF
-
-!IF "$(COMPONENT_TYPE)" != "LIBRARY" && EXIST($(BUILD_DIR)\$(PROCESSOR)\CompilerStub.lib)
-LIBS = $(LIBS) $(BUILD_DIR)\$(PROCESSOR)\CompilerStub.lib
-!ENDIF
-
-#
-# Command flags for MAKEDEPS tool
-#
-DEP_FLAGS = -target $** -o $(DEP_FILE) $(INC) -ignorenotfound -q
-DEP_FLAGS2 = -target $@ -o $(DEP_FILE) -cl
-
-[=============================================================================]
-#
-# These are the commands to compile source files. One of these blocks gets
-# emitted to the component's makefile for each source file. The section
-# name is encoded as [Compile.$(PROCESSOR).source_filename_extension], where
-# the source filename comes from the sources section of the component INF file.
-#
-# If the dependency list file already exists, then include it for this
-# source file. If it doesn't exist, then this is a clean build and the
-# dependency file will get created below and the source file will get
-# compiled.
-#
-# Current behavior is that the first clean build will not create dep files.
-# But the following second build has to create dep files before build source files.
-# CREATEDEPS flag is used to judge whether current build is the second build or not.
-#
-#
-[=============================================================================]
-[Compile.Ia32.asm,Compile.x64.asm]
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(FILE)Asm.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE)Asm.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS) -asm
-
-#
-# Compile the file
-#
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
- $(ASM) $(ASM_FLAGS) $(SOURCE_FILE_NAME)
-
-[=============================================================================]
-[Compile.Ipf.s]
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(FILE)S.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE)S.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS)
-
-!ENDIF
-
-#
-# Compile the file
-#
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
- $(CC) $(C_FLAGS_PRO) $(SOURCE_FILE_NAME) > $(DEST_DIR)\$(FILE).pro
-!ELSE
- -$(CC) $(C_FLAGS_PRO) $(SOURCE_FILE_NAME) /showIncludes > $(DEST_DIR)\$(FILE).pro 2> $(DEST_DIR)\$(FILE)S.cl
- @$(MAKEDEPS) -f $(DEST_DIR)\$(FILE)S.cl $(DEP_FLAGS2)
-!ENDIF
- $(ASM) $(ASM_FLAGS) $(DEST_DIR)\$(FILE).pro
-
-[=============================================================================]
-[Compile.Ia32.c,Compile.Ipf.c,Compile.x64.c]
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(FILE).dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE).dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS)
-
-!ENDIF
-
-#
-# Compile the file
-#
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
- $(CC) $(C_FLAGS) $(SOURCE_FILE_NAME)
-!ELSE
- -$(CC) $(C_FLAGS) $(SOURCE_FILE_NAME) /showIncludes > $(DEST_DIR)\$(FILE).cl
- @$(MAKEDEPS) -f $(DEST_DIR)\$(FILE).cl $(DEP_FLAGS2)
-!ENDIF
-
-[=============================================================================]
-[Compile.Ebc.c]
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(FILE).dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE).dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS)
-
-#
-# Compile the file
-#
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
- $(EBC_CC) $(EBC_C_FLAGS) $(SOURCE_FILE_NAME)
-
-[=============================================================================]
-#
-# Commands for compiling a ".apr" Apriori source file.
-#
-[=============================================================================]
-[Compile.Ia32.Apr,Compile.Ipf.Apr,Compile.Ebc.Apr,Compile.x64.Apr]
-#
-# Create the raw binary file. If you get an error on the build saying it doesn't
-# know how to create the .apr file, then you're missing (or mispelled) the
-# "APRIORI=" on the component lines in components section in the DSC file.
-#
-$(DEST_DIR)\$(BASE_NAME).bin : $(SOURCE_FILE_NAME) $(INF_FILENAME)
- $(GENAPRIORI) -v -f $(SOURCE_FILE_NAME) -o $(DEST_DIR)\$(BASE_NAME).bin
-
-$(DEST_DIR)\$(BASE_NAME).sec : $(DEST_DIR)\$(BASE_NAME).bin
- $(GENSECTION) -I $(DEST_DIR)\$(BASE_NAME).bin -O $(DEST_DIR)\$(BASE_NAME).sec -S EFI_SECTION_RAW
-
-[=============================================================================]
-[Build.Ia32.Apriori,Build.Ipf.Apriori,Build.Ebc.Apriori,Build.x64.Apriori]
-
-all : $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).FFS
-
-#
-# Run GenFfsFile on the package file and .raw file to create the firmware file
-#
-$(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).FFS : $(DEST_DIR)\$(BASE_NAME).sec $(PACKAGE_FILENAME)
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-[Build.Ia32.Makefile,Build.Ipf.Makefile,Build.Ebc.Makefile,Build.x64.Makefile]
-
-#
-# Set some required macros
-#
-MAKEFILE_MACROS = SOURCE_DIR=$(SOURCE_DIR) \
- BUILD_DIR=$(BUILD_DIR) \
- FILE_GUID=$(FILE_GUID) \
- DEST_DIR=$(DEST_DIR) \
- PROCESSOR=$(PROCESSOR) \
- TOOLCHAIN=TOOLCHAIN_$(PROCESSOR) \
- BASE_NAME=$(BASE_NAME) \
- PACKAGE_FILENAME=$(PACKAGE_FILENAME)
-
-#
-# Just call the makefile from the source directory, passing in some
-# useful info.
-#
-all :
- $(MAKE) -f $(SOURCE_DIR)\makefile.new all $(MAKEFILE_MACROS)
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
- @- $(MAKE) -f $(SOURCE_DIR)\makefile.new clean $(MAKEFILE_MACROS) > NUL 2>&1
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-#
-# Instructions for building a component that uses a custom makefile. Encoding
-# is [build.$(PROCESSOR).$(BUILD_TYPE)].
-#
-# To build these components, simply call the makefile from the source
-# directory.
-#
-[=============================================================================]
-[Build.Ia32.Custom_Makefile,Build.Ipf.Custom_Makefile,Build.Ebc.Custom_Makefile,Build.x64.Custom_Makefile]
-
-#
-# Set some required macros
-#
-MAKEFILE_MACROS = SOURCE_DIR=$(SOURCE_DIR) \
- BUILD_DIR=$(BUILD_DIR) \
- DEST_DIR=$(DEST_DIR) \
- FILE_GUID=$(FILE_GUID) \
- PROCESSOR=$(PROCESSOR) \
- TOOLCHAIN=TOOLCHAIN_$(PROCESSOR) \
- BASE_NAME=$(BASE_NAME) \
- PLATFORM=$(PLATFORM) \
- SOURCE_FV=$(SOURCE_FV) \
- PACKAGE_FILENAME=$(PACKAGE_FILENAME)
-
-#
-# Just call the makefile from the source directory, passing in some
-# useful info.
-#
-all :
- $(MAKE) -f $(SOURCE_DIR)\makefile all $(MAKEFILE_MACROS)
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
- @- $(MAKE) -f $(SOURCE_DIR)\makefile clean $(MAKEFILE_MACROS) > NUL 2>&1
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-#
-# These commands are used to build libraries
-#
-[=============================================================================]
-[Build.Ia32.LIBRARY,Build.Ipf.LIBRARY,Build.x64.LIBRARY]
-#
-# LIB all the object files into to our target lib file. Put
-# a dependency on the component's INF file in case it changes.
-#
-LIB_NAME = $(LIB_DIR)\$(BASE_NAME).lib
-
-#
-# $(DEP_TARGETS) are not needed for binary build.
-#
-!IF ("$(BINARY)" == "TRUE") || (("$(BINARY)" == "") && ("$(EFI_BINARY_LIBRARY)" == "YES"))
-DEP_TARGETS=
-CREATEDEPS=
-!ENDIF
-
-#
-# Module can be built from source code or binary files.
-#
-!IF ((("$(BINARY)" == "TRUE") || (("$(BINARY)" == "") && ("$(EFI_BINARY_LIBRARY)" == "YES"))) \
- && EXIST($(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).lib))
-$(LIB_NAME) : $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).lib
- copy $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).lib $(LIB_NAME) /Y
- if exist $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME)Obj.pdb \
- copy $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME)Obj.pdb $(DEST_DIR)\$(BASE_NAME)Obj.pdb /Y
-!ELSE
-$(LIB_NAME) : $(OBJECTS) $(LIBS) $(INF_FILENAME) $(ENV_DEPS)
- $(LIB) $(LIB_FLAGS) $(OBJECTS) $(LIBS) /OUT:$@
-!IF ("$(EFI_BINARY_BUILD)" == "YES")
- if not exist $(EFI_PLATFORM_BIN)\$(PROCESSOR) mkdir $(EFI_PLATFORM_BIN)\$(PROCESSOR)
- if exist $(LIB_NAME) copy $(LIB_NAME) $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).lib /Y
- if exist $(DEST_DIR)\$(BASE_NAME)Obj.pdb copy $(DEST_DIR)\$(BASE_NAME)Obj.pdb $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME)Obj.pdb /Y
-!ENDIF
-!ENDIF
-
-!IF "$(CREATEDEPS)"=="YES"
-all : $(DEP_TARGETS)
- $(MAKE) -f $(MAKEFILE_NAME) all
-!ELSE
-all : $(LIB_NAME) $(DEP_TARGETS)
-!ENDIF
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-[Build.Ebc.LIBRARY]
-#
-# LIB all the object files into to our target lib file. Put
-# a dependency on the component's INF file in case it changes.
-#
-LIB_NAME = $(LIB_DIR)\$(BASE_NAME).lib
-
-$(LIB_NAME) : $(OBJECTS) $(LIBS) $(INF_FILENAME) $(ENV_DEPS)
- $(EBC_LIB) $(EBC_LIB_FLAGS) $(OBJECTS) $(LIBS) /OUT:$@
-
-!IF "$(CREATEDEPS)"=="YES"
-all : $(DEP_TARGETS)
- $(MAKE) -f $(MAKEFILE_NAME) all
-!ELSE
-all : $(LIB_NAME) $(DEP_TARGETS)
-!ENDIF
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-#
-# This is the Build.$(PROCESSOR).$(COMPONENT_TYPE) section that tells how to
-# convert a firmware volume into an FV FFS file. Simply run it through
-# GenFfsFile with the appropriate package file. SOURCE_FV must be defined
-# in the component INF file Defines section.
-#
-[=============================================================================]
-[Build.Ia32.FvImageFile,Build.x64.FvImageFile,Build.Ipf.FvImageFile]
-
-all : $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).Fvi
-
-#
-# Run GenFfsFile on the package file and FV file to create the firmware
-# volume FFS file. This FFS file maybe contain one pad section for alignment requirement.
-#
-$(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).Fvi : $(DEST_DIR)\$(SOURCE_FV)Fv.sec $(PACKAGE_FILENAME) $(PAD_SECTION)
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-#
-# Since many of the steps are the same for the different component types, we
-# share this section for BS_DRIVER, RT_DRIVER, .... and IFDEF the parts that
-# differ. The entire section gets dumped to the output makefile.
-#
-[=============================================================================]
-[Build.Ia32.BS_DRIVER|RT_DRIVER|SAL_RT_DRIVER|PE32_PEIM|PEI_CORE|PIC_PEIM|RELOCATABLE_PEIM|DXE_CORE|APPLICATION|COMBINED_PEIM_DRIVER, Build.Ipf.BS_DRIVER|RT_DRIVER|SAL_RT_DRIVER|PEI_CORE|PE32_PEIM|PIC_PEIM|DXE_CORE|APPLICATION|COMBINED_PEIM_DRIVER, Build.x64.BS_DRIVER|RT_DRIVER|SAL_RT_DRIVER|PE32_PEIM|PEI_CORE|PIC_PEIM|RELOCATABLE_PEIM|DXE_CORE|APPLICATION|COMBINED_PEIM_DRIVER]
-
-!IF "$(LOCALIZE)" == "YES"
-
-!IF (("$(EFI_GENERATE_HII_RESOURCE)" == "YES") && ("$(EFI_SPECIFICATION_VERSION)" >= "0x0002000A"))
-#
-# This will generate HII resource section in PE/COFF image.
-#
-# Note: when HII package list is built into resource section, Driver no longer
-# refer to C array generated by VfrCompiler ($(FILE_NAME)Bin) and StrGather
-# ($(BASE_NAME)Strings); while in current build rule, those C array objects
-# will still be linked with the Driver, so please turn on link flag "/OPT:REF"
-# to minimize the code size.
-#
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(BASE_NAME)Strings.hpk
-LOCALIZE_TARGETS = $(LOCALIZE_TARGETS) $(DEST_DIR)\$(BASE_NAME).res
-LINK_FLAGS_DLL = $(LINK_FLAGS_DLL) $(DEST_DIR)\$(BASE_NAME).res
-
-$(DEST_DIR)\$(BASE_NAME).rc : $(HII_PACK_FILES)
- $(HIIPACK) -g $(FILE_GUID) $(HII_PACK_FILES) -rc $(DEST_DIR)\$(BASE_NAME).rc -hii $(DEST_DIR)\$(BASE_NAME).hii
-
-$(DEST_DIR)\$(BASE_NAME).res : $(DEST_DIR)\$(BASE_NAME).rc
- $(RC) /fo $(DEST_DIR)\$(BASE_NAME).res $(DEST_DIR)\$(BASE_NAME).rc
-
-!ENDIF
-
-!IF (("$(EFI_GENERATE_HII_EXPORT)" == "YES") && ("$(EFI_SPECIFICATION_VERSION)" < "0x0002000A"))
-#
-# There will be one HII pack containing all the strings. Add that file
-# to the list of HII pack files we'll use to create our final HII export file.
-#
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(BASE_NAME)Strings.hpk
-LOCALIZE_TARGETS = $(LOCALIZE_TARGETS) $(DEST_DIR)\$(BASE_NAME).hii
-!ENDIF
-
-!IF ("$(EFI_SPECIFICATION_VERSION)" >= "0x0002000A")
-#
-# Note: currently -ppflag option is only available for UefiStrGather
-# Note: /GS- will cause warning for preprocess, so filter it out from STRGATHER_PPFLAG
-#
-STRGATHER_PPFLAG = $(C_FLAGS: /GS-=)
-STRGATHER_FLAGS = $(STRGATHER_FLAGS) -ppflag "$(STRGATHER_PPFLAG)" -oh $(DEST_DIR)\$(BASE_NAME)StrDefs.h
-!ENDIF
-
-$(DEST_DIR)\$(BASE_NAME).sdb : $(SDB_FILES) $(SOURCE_FILES)
- $(STRGATHER) -scan -vdbr $(STRGATHER_FLAGS) -od $(DEST_DIR)\$(BASE_NAME).sdb \
- -skipext .uni -skipext .h $(SOURCE_FILES)
-
-$(DEST_DIR)\$(BASE_NAME)Strings.c : $(DEST_DIR)\$(BASE_NAME).sdb
- $(STRGATHER) -dump $(LANGUAGE_FLAGS) -bn $(BASE_NAME)Strings -db $(DEST_DIR)\$(BASE_NAME).sdb \
- -oc $(DEST_DIR)\$(BASE_NAME)Strings.c
-
-$(DEST_DIR)\$(BASE_NAME)StrDefs.h : $(DEST_DIR)\$(BASE_NAME).sdb
- $(STRGATHER) -dump $(LANGUAGE_FLAGS) -bn $(BASE_NAME)Strings -db $(DEST_DIR)\$(BASE_NAME).sdb \
- -oh $(DEST_DIR)\$(BASE_NAME)StrDefs.h
-
-$(DEST_DIR)\$(BASE_NAME)Strings.hpk : $(DEST_DIR)\$(BASE_NAME).sdb
- $(STRGATHER) -dump $(LANGUAGE_FLAGS) -bn $(BASE_NAME)Strings -db $(DEST_DIR)\$(BASE_NAME).sdb \
- -hpk $(DEST_DIR)\$(BASE_NAME)Strings.hpk
-
-OBJECTS = $(OBJECTS) $(DEST_DIR)\$(BASE_NAME)Strings.obj
-
-$(DEST_DIR)\$(BASE_NAME)Strings.obj : $(DEST_DIR)\$(BASE_NAME)Strings.c $(INF_FILENAME) $(ALL_DEPS)
- $(CC) $(C_FLAGS) $(DEST_DIR)\$(BASE_NAME)Strings.c
-
-LOCALIZE_TARGETS = $(DEST_DIR)\$(BASE_NAME)StrDefs.h $(LOCALIZE_TARGETS)
-
-!ENDIF
-
-#
-# If we have any objects associated with this component, then we're
-# going to build a local library from them.
-#
-!IFNDEF OBJECTS
-!ERROR No source files to build were defined in the INF file
-!ENDIF
-
-TARGET_LOCAL_LIB = $(DEST_DIR)\$(BASE_NAME)Local.lib
-
-#
-# LIB all the object files into our (local) target lib file. Put
-# a dependency on the component's INF file in case it changes.
-#
-$(TARGET_LOCAL_LIB) : $(OBJECTS) $(INF_FILENAME) $(ENV_DEPS)
- $(LIB) $(LIB_FLAGS) $(OBJECTS) /OUT:$@
-
-#
-# Defines for standard intermediate files and build targets
-#
-TARGET_DLL = $(BIN_DIR)\$(BASE_NAME).dll
-TARGET_EFI = $(BIN_DIR)\$(BASE_NAME).efi
-TARGET_DPX = $(DEST_DIR)\$(BASE_NAME).dpx
-TARGET_UI = $(DEST_DIR)\$(BASE_NAME).ui
-TARGET_VER = $(DEST_DIR)\$(BASE_NAME).ver
-TARGET_MAP = $(BIN_DIR)\$(BASE_NAME).map
-TARGET_PDB = $(BIN_DIR)\$(BASE_NAME).pdb
-TARGET_SYM = $(BIN_DIR)\$(BASE_NAME).sym
-
-#
-# Target executable section extension depends on the component type.
-# Only define "TARGET_DXE_DPX" if it's a combined peim driver.
-#
-!IF "$(COMPONENT_TYPE)" == "PIC_PEIM"
-TARGET_PE32 = $(DEST_DIR)\$(BASE_NAME).pic
-!ELSE
-TARGET_PE32 = $(DEST_DIR)\$(BASE_NAME).pe32
-!ENDIF
-
-#
-# Target FFS file extension depends on the component type
-# Also define "TARGET_DXE_DPX" if it's a combined PEIM driver.
-#
-SUBSYSTEM = EFI_BOOT_SERVICE_DRIVER
-
-!IF "$(COMPONENT_TYPE)" == "APPLICATION"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).app
-SUBSYSTEM = EFI_APPLICATION
-!ELSE IF "$(COMPONENT_TYPE)" == "PEI_CORE"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).pei
-!ELSE IF "$(COMPONENT_TYPE)" == "PE32_PEIM"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).pei
-!ELSE IF "$(COMPONENT_TYPE)" == "RELOCATABLE_PEIM"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).pei
-!ELSE IF "$(COMPONENT_TYPE)" == "PIC_PEIM"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).pei
-!ELSE IF "$(COMPONENT_TYPE)" == "COMBINED_PEIM_DRIVER"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).pei
-TARGET_DXE_DPX = $(DEST_DIR)\$(BASE_NAME).dpxd
-!ELSE
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).dxe
-!ENDIF
-
-#
-# Different methods to build section based on if PIC_PEIM
-#
-!IF "$(COMPONENT_TYPE)" == "PIC_PEIM"
-
-$(TARGET_PE32) : $(TARGET_DLL)
- $(PE2BIN) $(TARGET_DLL) $(DEST_DIR)\$(BASE_NAME).TMP
-#
-# BUGBUG: Build PEIM header, needs to go away with new PEI.
-#
- $(TEMPGENSECTION) -P $(SOURCE_DIR)\$(BASE_NAME).INF -I $(DEST_DIR)\$(BASE_NAME).TMP -O $(TARGET_PIC_PEI).tmp -M $(TARGET_MAP) -S EFI_SECTION_TYPE_NO_HEADER
- $(GENSECTION) -I $(TARGET_PIC_PEI).tmp -O $(TARGET_PE32) -S EFI_SECTION_PIC
- del $(DEST_DIR)\$(BASE_NAME).TMP
-
-!ELSE
-
-$(TARGET_PE32) : $(TARGET_EFI)
- $(GENSECTION) -I $(TARGET_EFI) -O $(TARGET_PE32) -S EFI_SECTION_PE32
-
-#
-# $(DEP_TARGETS) are not needed for binary build.
-#
-!IF "$(BINARY)" == "TRUE"
-DEP_TARGETS=
-CREATEDEPS=
-!ENDIF
-
-#
-# Build module to generate *.efi file from source code or binary file.
-#
-!IF (("$(BINARY)" == "TRUE") && EXIST($(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi))
-LOCALIZE_TARGETS=
-$(TARGET_EFI) : $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi
- copy $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi $(TARGET_EFI) /Y
- if exist $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).pdb \
- copy $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).pdb $(TARGET_PDB) /Y
-!ELSE
-$(TARGET_EFI) : $(TARGET_DLL) $(INF_FILENAME)
- $(FWIMAGE) -t 0 $(COMPONENT_TYPE) $(TARGET_DLL) $(TARGET_EFI)
-!IF ("$(EFI_BINARY_BUILD)" == "YES")
- if not exist $(EFI_PLATFORM_BIN)\$(PROCESSOR) mkdir $(EFI_PLATFORM_BIN)\$(PROCESSOR)
- if exist $(TARGET_EFI) copy $(TARGET_EFI) $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi /Y
- if exist $(TARGET_PDB) copy $(TARGET_PDB) $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).pdb /Y
-!ENDIF
-!ENDIF
-
-!ENDIF
-
-#
-# Link all objects and libs to create the executable
-#
-$(TARGET_DLL) : $(TARGET_LOCAL_LIB) $(LIBS) $(INF_FILENAME) $(ENV_DEPS)
- $(LINK) $(LINK_FLAGS_DLL) $(LIBS) /ENTRY:$(IMAGE_ENTRY_POINT) \
- $(TARGET_LOCAL_LIB) /OUT:$(TARGET_DLL) /MAP:$(TARGET_MAP) \
- /PDB:$(TARGET_PDB)
- $(SETSTAMP) $(TARGET_DLL) $(BUILD_DIR)\GenStamp.txt
-!IF "$(EFI_GENERATE_SYM_FILE)" == "YES"
- if exist $(TARGET_PDB) $(PE2SYM) $(TARGET_PDB) $(TARGET_SYM)
-!ENDIF
-
-!IF "$(EFI_ZERO_DEBUG_DATA)" == "YES"
- $(ZERODEBUGDATA) $(TARGET_DLL)
-!ENDIF
-
-#
-# Create the user interface section
-#
-$(TARGET_UI) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_UI) -S EFI_SECTION_USER_INTERFACE -A "$(BASE_NAME)"
-
-#
-# Create the version section
-#
-!IF "$(BUILD_NUMBER)" != ""
-!IF "$(VERSION_STRING)" != ""
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER) -A "$(VERSION_STRING)"
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER)
-!ENDIF
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- echo.>$(TARGET_VER)
- type $(TARGET_VER)>$(TARGET_VER)
-!ENDIF
-
-#
-# Makefile entries to create the dependency expression section.
-# Use the DPX file from the source directory unless an override file
-# was specified.
-# If no DPX source file was specified, then create an empty file to
-# be used.
-#
-!IF "$(DPX_SOURCE)" != ""
-DPX_SOURCE_FILE = $(SOURCE_DIR)\$(DPX_SOURCE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_OVERRIDE)" != ""
-DPX_SOURCE_FILE = $(DPX_SOURCE_OVERRIDE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_FILE)" != ""
-!IF EXIST ($(DPX_SOURCE_FILE))
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(BASE_NAME)dxs.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
-
-!IF EXIST($(TARGET_DPX))
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(BASE_NAME)dxs.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(TARGET_DPX)
- $(MAKEDEPS) -f $(DPX_SOURCE_FILE) $(DEP_FLAGS)
-
-!ENDIF
-
-$(TARGET_DPX) : $(DPX_SOURCE_FILE) $(INF_FILENAME)
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
- $(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) > $*.tmp1
-!ELSE
- -$(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) /showIncludes > $*.tmp1 2> $(DEST_DIR)\$(BASE_NAME)dxs.cl
- @$(MAKEDEPS) -f $(DEST_DIR)\$(BASE_NAME)dxs.cl $(DEP_FLAGS2)
-!ENDIF
- $(GENDEPEX) -I $*.tmp1 -O $*.tmp2
- $(GENSECTION) -I $*.tmp2 -O $@ -S $(DEPEX_TYPE)
- del $*.tmp1 > NUL
- del $*.tmp2 > NUL
-!ELSE
-!ERROR Dependency expression source file "$(DPX_SOURCE_FILE)" does not exist.
-!ENDIF
-!ELSE
-$(TARGET_DPX) : $(INF_FILENAME)
- echo. > $(TARGET_DPX)
- type $(TARGET_DPX) > $(TARGET_DPX)
-!ENDIF
-
-#
-# Makefile entries for DXE DPX for combined PEIM drivers.
-# If a DXE_DPX_SOURCE file was specified in the INF file, use it. Otherwise
-# create an empty file and use it as a DPX file.
-#
-!IF "$(COMPONENT_TYPE)" == "COMBINED_PEIM_DRIVER"
-!IF "$(DXE_DPX_SOURCE)" != ""
-!IF EXIST ($(SOURCE_DIR)\$(DXE_DPX_SOURCE))
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(BASE_NAME)dxs2.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
-
-!IF EXIST($(TARGET_DXE_DPX))
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(BASE_NAME)dxs2.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(TARGET_DXE_DPX)
- $(MAKEDEPS) -f $(SOURCE_DIR)\$(DXE_DPX_SOURCE) $(DEP_FLAGS)
-
-!ENDIF
-
-$(TARGET_DXE_DPX) : $(SOURCE_DIR)\$(DXE_DPX_SOURCE) $(INF_FILENAME)
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
- $(CC) $(C_FLAGS_DPX) $(SOURCE_DIR)\$(DXE_DPX_SOURCE) > $*.tmp1
-!ELSE
- -$(CC) $(C_FLAGS_DPX) $(SOURCE_DIR)\$(DXE_DPX_SOURCE) /showIncludes > $*.tmp1 2> $(DEST_DIR)\$(BASE_NAME)dxs2.cl
- @$(MAKEDEPS) -f $(DEST_DIR)\$(BASE_NAME)dxs2.cl $(DEP_FLAGS2)
-!ENDIF
- $(GENDEPEX) -I $*.tmp1 -O $*.tmp2
- $(GENSECTION) -I $*.tmp2 -O $@ -S EFI_SECTION_DXE_DEPEX
- del $*.tmp1 > NUL
- del $*.tmp2 > NUL
-!ELSE
-!ERROR Dependency expression source file "$(SOURCE_DIR)\$(DXE_DPX_SOURCE)" does not exist.
-!ENDIF
-!ELSE
-$(TARGET_DXE_DPX) : $(INF_FILENAME)
- echo. > $(TARGET_DXE_DPX)
- type $(TARGET_DXE_DPX) > $(TARGET_DXE_DPX)
-!ENDIF
-!ENDIF
-
-#
-# Describe how to build the HII export file from all the input HII pack files.
-# Use the FFS file GUID for the package GUID in the export file. Only used
-# when multiple VFR share strings.
-#
-$(DEST_DIR)\$(BASE_NAME).hii : $(HII_PACK_FILES)
- $(HIIPACK) create -g $(FILE_GUID) -p $(HII_PACK_FILES) -o $(DEST_DIR)\$(BASE_NAME).hii
-
-#
-# If the build calls for creating an FFS file with the IFR included as
-# a separate binary (not compiled into the driver), then build the binary
-# section now. Note that the PACKAGE must be set correctly to actually get
-# this IFR section pulled into the FFS file.
-#
-!IF ("$(HII_IFR_PACK_FILES)" != "")
-
-$(DEST_DIR)\$(BASE_NAME)IfrBin.sec : $(HII_IFR_PACK_FILES)
- $(HIIPACK) create -novarpacks -p $(HII_IFR_PACK_FILES) -o $(DEST_DIR)\$(BASE_NAME)IfrBin.hii
- $(GENSECTION) -I $(DEST_DIR)\$(BASE_NAME)IfrBin.hii -O $(DEST_DIR)\$(BASE_NAME)IfrBin.sec -S EFI_SECTION_RAW
-
-BIN_TARGETS = $(BIN_TARGETS) $(DEST_DIR)\$(BASE_NAME)IfrBin.sec
-
-!ENDIF
-
-#
-# Build a FFS file from the sections and package
-#
-$(TARGET_FFS_FILE) : $(TARGET_PE32) $(TARGET_DPX) $(TARGET_UI) $(TARGET_VER) $(TARGET_DXE_DPX) $(PACKAGE_FILENAME)
-#
-# Some of our components require padding to align code
-#
-!IF "$(PROCESSOR)" == "IPF"
-!IF "$(COMPONENT_TYPE)" == "PIC_PEIM" || "$(COMPONENT_TYPE)" == "PE32_PEIM" || "$(COMPONENT_TYPE)" == "RELOCATABLE_PEIM" || "$(COMPONENT_TYPE)" == "SECURITY_CORE" || "$(COMPONENT_TYPE)" == "PEI_CORE" || "$(COMPONENT_TYPE)" == "COMBINED_PEIM_DRIVER"
- copy $(BIN_DIR)\Blank.pad $(DEST_DIR)
-!ENDIF
-!ENDIF
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-!IF "$(CREATEDEPS)"=="YES"
-all : $(DEP_TARGETS)
- $(MAKE) -f $(MAKEFILE_NAME) all
-!ELSE
-all : $(LOCALIZE_TARGETS) $(BIN_TARGETS) $(TARGET_FFS_FILE) $(DEP_TARGETS)
-!ENDIF
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-[Build.Ia32.TE_PEIM,Build.Ipf.TE_PEIM,Build.x64.TE_PEIM]
-#
-# Define the library file we'll build if we have any objects defined.
-#
-!IFDEF OBJECTS
-TARGET_LOCAL_LIB = $(DEST_DIR)\$(BASE_NAME)Local.lib
-#
-# LIB all the object files into our (local) target lib file. Put
-# a dependency on the component's INF file in case it changes.
-#
-$(TARGET_LOCAL_LIB) : $(OBJECTS) $(INF_FILENAME) $(ENV_DEPS)
- $(LIB) $(LIB_FLAGS) $(OBJECTS) /OUT:$@
-
-!ELSE
-!ERROR No source files to build were defined in the INF file
-!ENDIF
-
-#
-# Defines for standard intermediate files and build targets
-#
-TARGET_DLL = $(BIN_DIR)\$(BASE_NAME).dll
-TARGET_EFI = $(BIN_DIR)\$(BASE_NAME).efi
-TARGET_DPX = $(DEST_DIR)\$(BASE_NAME).dpx
-TARGET_UI = $(DEST_DIR)\$(BASE_NAME).ui
-TARGET_VER = $(DEST_DIR)\$(BASE_NAME).ver
-TARGET_MAP = $(BIN_DIR)\$(BASE_NAME).map
-TARGET_PDB = $(BIN_DIR)\$(BASE_NAME).pdb
-TARGET_SYM = $(BIN_DIR)\$(BASE_NAME).sym
-TARGET_TE = $(BIN_DIR)\$(BASE_NAME).te
-TARGET_PE32 = $(DEST_DIR)\$(BASE_NAME).pe32
-TARGET_TES = $(DEST_DIR)\$(BASE_NAME).tes
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).pei
-
-#
-# Create our TE section from our TE file
-#
-$(TARGET_TES) : $(TARGET_TE)
- $(GENSECTION) -I $(TARGET_TE) -O $(TARGET_TES) -S EFI_SECTION_TE
-
-#
-# $(DEP_TARGETS) are not needed for binary build.
-#
-!IF "$(BINARY)" == "TRUE"
-DEP_TARGETS=
-CREATEDEPS=
-!ENDIF
-
-#
-# Build module to generate *.efi file from source code or binary file.
-#
-!IF (("$(BINARY)" == "TRUE") && EXIST($(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi))
-$(TARGET_EFI) : $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi
- copy $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi $(TARGET_EFI) /Y
- if exist $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).pdb \
- copy $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).pdb $(TARGET_PDB) /Y
-!ELSE
-$(TARGET_EFI) : $(TARGET_DLL) $(INF_FILENAME)
- $(FWIMAGE) $(COMPONENT_TYPE) $(TARGET_DLL) $(TARGET_EFI)
-!IF ("$(EFI_BINARY_BUILD)" == "YES")
- if not exist $(EFI_PLATFORM_BIN)\$(PROCESSOR) mkdir $(EFI_PLATFORM_BIN)\$(PROCESSOR)
- if exist $(TARGET_EFI) copy $(TARGET_EFI) $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).efi /Y
- if exist $(TARGET_PDB) copy $(TARGET_PDB) $(EFI_PLATFORM_BIN)\$(PROCESSOR)\$(BASE_NAME).pdb /Y
-!ENDIF
-!ENDIF
-
-#
-# Run GenTEImage on the built .efi file to create our TE file.
-#
-$(TARGET_TE) : $(TARGET_EFI)
- $(GENTEIMAGE) -o $(TARGET_TE) $(TARGET_EFI)
-
-#
-# Link all objects and libs to create the executable
-#
-$(TARGET_DLL) : $(TARGET_LOCAL_LIB) $(LIBS) $(INF_FILENAME) $(ENV_DEPS)
- $(LINK) $(LINK_FLAGS_DLL) $(LIBS) /ENTRY:$(IMAGE_ENTRY_POINT) \
- $(TARGET_LOCAL_LIB) /OUT:$(TARGET_DLL) /MAP:$(TARGET_MAP) \
- /PDB:$(TARGET_PDB)
- $(SETSTAMP) $(TARGET_DLL) $(BUILD_DIR)\GenStamp.txt
-!IF "$(EFI_GENERATE_SYM_FILE)" == "YES"
- if exist $(TARGET_PDB) $(PE2SYM) $(TARGET_PDB) $(TARGET_SYM)
-!ENDIF
-
-!IF "$(EFI_ZERO_DEBUG_DATA)" == "YES"
- $(ZERODEBUGDATA) $(TARGET_DLL)
-!ENDIF
-
-#
-# Create the user interface section
-#
-$(TARGET_UI) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_UI) -S EFI_SECTION_USER_INTERFACE -A "$(BASE_NAME)"
-
-#
-# Create the version section
-#
-!IF "$(BUILD_NUMBER)" != ""
-!IF "$(VERSION_STRING)" != ""
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER) -A "$(VERSION_STRING)"
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER)
-!ENDIF
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- echo.>$(TARGET_VER)
- type $(TARGET_VER)>$(TARGET_VER)
-!ENDIF
-
-#
-# Makefile entries to create the dependency expression section.
-# Use the DPX file from the source directory unless an override file
-# was specified.
-# If no DPX source file was specified, then create an empty file to
-# be used.
-#
-!IF "$(DPX_SOURCE)" != ""
-DPX_SOURCE_FILE = $(SOURCE_DIR)\$(DPX_SOURCE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_OVERRIDE)" != ""
-DPX_SOURCE_FILE = $(DPX_SOURCE_OVERRIDE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_FILE)" != ""
-!IF EXIST ($(DPX_SOURCE_FILE))
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(BASE_NAME)dxs.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
-
-!IF EXIST($(TARGET_DPX))
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(BASE_NAME)dxs.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(TARGET_DPX)
- $(MAKEDEPS) -f $(DPX_SOURCE_FILE) $(DEP_FLAGS)
-
-!ENDIF
-
-$(TARGET_DPX) : $(DPX_SOURCE_FILE) $(INF_FILENAME)
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
- $(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) > $*.tmp1
-!ELSE
- -$(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) /showIncludes > $*.tmp1 2> $(DEST_DIR)\$(BASE_NAME)dxs.cl
- @$(MAKEDEPS) -f $(DEST_DIR)\$(BASE_NAME)dxs.cl $(DEP_FLAGS2)
-!ENDIF
- $(GENDEPEX) -I $*.tmp1 -O $*.tmp2
- $(GENSECTION) -I $*.tmp2 -O $@ -S $(DEPEX_TYPE)
- del $*.tmp1 > NUL
- del $*.tmp2 > NUL
-!ELSE
-!ERROR Dependency expression source file "$(DPX_SOURCE_FILE)" does not exist.
-!ENDIF
-!ELSE
-$(TARGET_DPX) : $(INF_FILENAME)
- echo. > $(TARGET_DPX)
- type $(TARGET_DPX) > $(TARGET_DPX)
-!ENDIF
-
-#
-# Build an FFS file from the sections and package
-#
-$(TARGET_FFS_FILE) : $(TARGET_TES) $(TARGET_DPX) $(TARGET_UI) $(TARGET_VER) $(PACKAGE_FILENAME)
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-!IF "$(CREATEDEPS)"=="YES"
-all : $(DEP_TARGETS)
- $(MAKE) -f $(MAKEFILE_NAME) all
-!ELSE
-all : $(TARGET_FFS_FILE) $(DEP_TARGETS)
-!ENDIF
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-#
-# These are the commands to build EBC EFI targets
-#
-[=============================================================================]
-[Build.Ebc.BS_DRIVER|RT_DRIVER|APPLICATION]
-
-#
-# Add the EBC library to our list of libs
-#
-LIBS = $(LIBS) $(EBC_TOOLS_PATH)\lib\EbcLib.lib
-
-!IF "$(LOCALIZE)" == "YES"
-
-!IF (("$(EFI_GENERATE_HII_RESOURCE)" == "YES") && ("$(EFI_SPECIFICATION_VERSION)" >= "0x0002000A"))
-#
-# This will generate HII resource section in PE/COFF image.
-#
-# Note: when HII package list is built into resource section, Driver no longer
-# refer to C array generated by VfrCompiler ($(FILE_NAME)Bin) and StrGather
-# ($(BASE_NAME)Strings); while in current build rule, those C array objects
-# will still be linked with the Driver, so please turn on link flag "/OPT:REF"
-# to minimize the code size.
-#
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(BASE_NAME)Strings.hpk
-LOCALIZE_TARGETS = $(LOCALIZE_TARGETS) $(DEST_DIR)\$(BASE_NAME).res
-OBJECTS = $(OBJECTS) $(DEST_DIR)\$(BASE_NAME).res
-
-$(DEST_DIR)\$(BASE_NAME).rc : $(HII_PACK_FILES)
- $(HIIPACK) -g $(FILE_GUID) $(HII_PACK_FILES) -rc $(DEST_DIR)\$(BASE_NAME).rc -hii $(DEST_DIR)\$(BASE_NAME).hii
-
-$(DEST_DIR)\$(BASE_NAME).res : $(DEST_DIR)\$(BASE_NAME).rc
- $(RC) /fo $(DEST_DIR)\$(BASE_NAME).res $(DEST_DIR)\$(BASE_NAME).rc
-
-!ENDIF
-
-!IF (("$(EFI_GENERATE_HII_EXPORT)" == "YES") && ("$(EFI_SPECIFICATION_VERSION)" < "0x0002000A"))
-#
-# There will be one HII pack containing all the strings. Add that file
-# to the list of HII pack files we'll use to create our final HII export file.
-#
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(BASE_NAME)Strings.hpk
-
-LOCALIZE_TARGETS = $(LOCALIZE_TARGETS) $(DEST_DIR)\$(BASE_NAME).hii
-!ENDIF
-
-!IF ("$(EFI_SPECIFICATION_VERSION)" >= "0x0002000A")
-#
-# Note: currently -ppflag option is only available for UefiStrGather
-# Note: /GS- will cause warning for preprocess, so filter it out from STRGATHER_PPFLAG
-#
-STRGATHER_PPFLAG = $(EBC_C_FLAGS: /GS-=)
-STRGATHER_FLAGS = $(STRGATHER_FLAGS) -ppflag "$(STRGATHER_PPFLAG)" -oh $(DEST_DIR)\$(BASE_NAME)StrDefs.h
-!ENDIF
-
-$(DEST_DIR)\$(BASE_NAME).sdb : $(SDB_FILES) $(SOURCE_FILES)
- $(STRGATHER) -scan -vdbr $(STRGATHER_FLAGS) -od $(DEST_DIR)\$(BASE_NAME).sdb \
- -skipext .uni -skipext .h $(SOURCE_FILES)
-
-$(DEST_DIR)\$(BASE_NAME)Strings.c : $(DEST_DIR)\$(BASE_NAME).sdb
- $(STRGATHER) -dump $(LANGUAGE_FLAGS) -bn $(BASE_NAME)Strings -db $(DEST_DIR)\$(BASE_NAME).sdb \
- -oc $(DEST_DIR)\$(BASE_NAME)Strings.c
-
-$(DEST_DIR)\$(BASE_NAME)StrDefs.h : $(DEST_DIR)\$(BASE_NAME).sdb
- $(STRGATHER) -dump $(LANGUAGE_FLAGS) -bn $(BASE_NAME)Strings -db $(DEST_DIR)\$(BASE_NAME).sdb \
- -oh $(DEST_DIR)\$(BASE_NAME)StrDefs.h
-
-$(DEST_DIR)\$(BASE_NAME)Strings.hpk : $(DEST_DIR)\$(BASE_NAME).sdb
- $(STRGATHER) -dump $(LANGUAGE_FLAGS) -bn $(BASE_NAME)Strings -db $(DEST_DIR)\$(BASE_NAME).sdb \
- -hpk $(DEST_DIR)\$(BASE_NAME)Strings.hpk
-
-OBJECTS = $(OBJECTS) $(DEST_DIR)\$(BASE_NAME)Strings.obj
-
-$(DEST_DIR)\$(BASE_NAME)Strings.obj : $(DEST_DIR)\$(BASE_NAME)Strings.c $(INF_FILENAME) $(ALL_DEPS)
- $(EBC_CC) $(EBC_C_FLAGS) $(DEST_DIR)\$(BASE_NAME)Strings.c
-
-LOCALIZE_TARGETS = $(DEST_DIR)\$(BASE_NAME)StrDefs.h $(LOCALIZE_TARGETS)
-
-!ENDIF
-
-#
-# If building an application, then the target is a .app, not .dxe
-#
-!IF "$(COMPONENT_TYPE)" == "APPLICATION"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).app
-SUBSYSTEM = EFI_APPLICATION
-!ELSE
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).dxe
-SUBSYSTEM = EFI_BOOT_SERVICE_DRIVER
-!ENDIF
-
-#
-# Defines for standard intermediate files and build targets
-#
-TARGET_EFI = $(BIN_DIR)\$(BASE_NAME).efi
-TARGET_DPX = $(DEST_DIR)\$(BASE_NAME).dpx
-TARGET_UI = $(DEST_DIR)\$(BASE_NAME).ui
-TARGET_VER = $(DEST_DIR)\$(BASE_NAME).ver
-TARGET_MAP = $(BIN_DIR)\$(BASE_NAME).map
-TARGET_PDB = $(BIN_DIR)\$(BASE_NAME).pdb
-TARGET_PE32 = $(DEST_DIR)\$(BASE_NAME).pe32
-TARGET_DLL = $(BIN_DIR)\$(BASE_NAME).dll
-
-#
-# First link all the objects and libs together to make a .dll file
-#
-$(TARGET_DLL) : $(OBJECTS) $(LIBS) $(INF_FILENAME) $(ENV_DEPS)
- $(EBC_LINK) $(EBC_LINK_FLAGS) /SUBSYSTEM:$(SUBSYSTEM) /ENTRY:EfiStart \
- $(OBJECTS) $(LIBS) /OUT:$(TARGET_DLL) /MAP:$(TARGET_MAP)
- $(SETSTAMP) $(TARGET_DLL) $(BUILD_DIR)\GenStamp.txt
-!IF "$(EFI_ZERO_DEBUG_DATA)" == "YES"
- $(ZERODEBUGDATA) $(TARGET_DLL)
-!ENDIF
-
-#
-# Now take the .dll file and make a .efi file
-#
-$(TARGET_EFI) : $(TARGET_DLL) $(INF_FILENAME)
- $(FWIMAGE) -t 0 $(COMPONENT_TYPE) $(TARGET_DLL) $(TARGET_EFI)
-
-#
-# Now take the .efi file and make a .pe32 section
-#
-$(TARGET_PE32) : $(TARGET_EFI)
- $(GENSECTION) -I $(TARGET_EFI) -O $(TARGET_PE32) -S EFI_SECTION_PE32
-
-#
-# Create the user interface section
-#
-$(TARGET_UI) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_UI) -S EFI_SECTION_USER_INTERFACE -A "$(BASE_NAME)"
-
-#
-# Create the version section
-#
-!IF "$(BUILD_NUMBER)" != ""
-!IF "$(VERSION_STRING)" != ""
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER) -A "$(VERSION_STRING)"
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER)
-!ENDIF
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- echo. > $(TARGET_VER)
- type $(TARGET_VER) > $(TARGET_VER)
-!ENDIF
-
-#
-# Makefile entries to create the dependency expression section.
-# Use the DPX file from the source directory unless an override file
-# was specified.
-# If no DPX source file was specified, then create an empty file to
-# be used.
-#
-!IF "$(DPX_SOURCE)" != ""
-DPX_SOURCE_FILE = $(SOURCE_DIR)\$(DPX_SOURCE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_OVERRIDE)" != ""
-DPX_SOURCE_FILE = $(DPX_SOURCE_OVERRIDE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_FILE)" != ""
-!IF EXIST ($(DPX_SOURCE_FILE))
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(BASE_NAME)dxs.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
-
-!IF EXIST($(TARGET_DPX))
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(BASE_NAME)dxs.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(TARGET_DPX)
- $(MAKEDEPS) -f $(DPX_SOURCE_FILE) $(DEP_FLAGS)
-
-!ENDIF
-
-$(TARGET_DPX) : $(DPX_SOURCE_FILE) $(INF_FILENAME)
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
- $(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) > $*.tmp1
-!ELSE
- -$(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) /showIncludes > $*.tmp1 2> $(DEST_DIR)\$(BASE_NAME)dxs.cl
- @$(MAKEDEPS) -f $(DEST_DIR)\$(BASE_NAME)dxs.cl $(DEP_FLAGS2)
-!ENDIF
- $(GENDEPEX) -I $*.tmp1 -O $*.tmp2
- $(GENSECTION) -I $*.tmp2 -O $@ -S $(DEPEX_TYPE)
- del $*.tmp1 > NUL
- del $*.tmp2 > NUL
-!ELSE
-!ERROR Dependency expression source file "$(DPX_SOURCE_FILE)" does not exist.
-!ENDIF
-!ELSE
-$(TARGET_DPX) : $(INF_FILENAME)
- echo. > $(TARGET_DPX)
- type $(TARGET_DPX) > $(TARGET_DPX)
-!ENDIF
-
-#
-# Describe how to build the HII export file from all the input HII pack files.
-# Use the FFS file GUID for the package GUID in the export file. Only used
-# when multiple VFR share strings.
-#
-$(DEST_DIR)\$(BASE_NAME).hii : $(HII_PACK_FILES)
- $(HIIPACK) create -g $(FILE_GUID) -p $(HII_PACK_FILES) -o $(DEST_DIR)\$(BASE_NAME).hii
-
-#
-# If the build calls for creating an FFS file with the IFR included as
-# a separate binary (not compiled into the driver), then build the binary
-# section now. Note that the PACKAGE must be set correctly to actually get
-# this IFR section pulled into the FFS file.
-#
-!IF ("$(HII_IFR_PACK_FILES)" != "")
-
-$(DEST_DIR)\$(BASE_NAME)IfrBin.sec : $(HII_IFR_PACK_FILES)
- $(HIIPACK) create -novarpacks -p $(HII_IFR_PACK_FILES) -o $(DEST_DIR)\$(BASE_NAME)IfrBin.hii
- $(GENSECTION) -I $(DEST_DIR)\$(BASE_NAME)IfrBin.hii -O $(DEST_DIR)\$(BASE_NAME)IfrBin.sec -S EFI_SECTION_RAW
-
-BIN_TARGETS = $(BIN_TARGETS) $(DEST_DIR)\$(BASE_NAME)IfrBin.sec
-
-!ENDIF
-
-#
-# Build an FFS file from the sections and package
-#
-$(TARGET_FFS_FILE) : $(TARGET_PE32) $(TARGET_DPX) $(TARGET_UI) $(TARGET_VER) $(PACKAGE_FILENAME)
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-!IF "$(CREATEDEPS)"=="YES"
-all : $(DEP_TARGETS)
- $(MAKE) -f $(MAKEFILE_NAME) all
-!ELSE
-all : $(LOCALIZE_TARGETS) $(BIN_TARGETS) $(TARGET_FFS_FILE) $(DEP_TARGETS)
-!ENDIF
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-#
-# These are the commands to build vendor-provided *.EFI files into an FV.
-# To use them, create an INF file with BUILD_TYPE=BS_DRIVER_EFI.
-# This section, as it now exists, only supports boot service drivers.
-#
-[=============================================================================]
-[Build.Ia32.BS_DRIVER_EFI|RT_DRIVER_EFI|APPLICATION_EFI|PE32_PEIM_EFI,Build.Ipf.BS_DRIVER_EFI|RT_DRIVER_EFI|APPLICATION_EFI|PE32_PEIM_EFI,Build.Ebc.BS_DRIVER_EFI|RT_DRIVER_EFI|APPLICATION_EFI,Build.x64.BS_DRIVER_EFI|RT_DRIVER_EFI|APPLICATION_EFI|PE32_PEIM_EFI]
-#
-# Defines for standard intermediate files and build targets. For the source
-# .efi file, take the one in the source directory if it exists. If there's not
-# one there, look for one in the processor-specfic subdirectory.
-#
-!IF EXIST ("$(SOURCE_DIR)\$(BASE_NAME).efi")
-TARGET_EFI = $(SOURCE_DIR)\$(BASE_NAME).efi
-!ELSEIF EXIST ("$(SOURCE_DIR)\$(PROCESSOR)\$(BASE_NAME).efi")
-TARGET_EFI = $(SOURCE_DIR)\$(PROCESSOR)\$(BASE_NAME).efi
-!ELSE
-!ERROR Pre-existing $(BASE_NAME).efi file not found in $(SOURCE_DIR) nor $(SOURCE_DIR)\$(PROCESSOR)
-!ENDIF
-
-TARGET_DPX = $(DEST_DIR)\$(BASE_NAME).dpx
-TARGET_UI = $(DEST_DIR)\$(BASE_NAME).ui
-TARGET_VER = $(DEST_DIR)\$(BASE_NAME).ver
-TARGET_MAP = $(BIN_DIR)\$(BASE_NAME).map
-TARGET_PDB = $(BIN_DIR)\$(BASE_NAME).pdb
-TARGET_PE32 = $(DEST_DIR)\$(BASE_NAME).pe32
-TARGET_DLL = $(BIN_DIR)\$(BASE_NAME).dll
-
-#
-# If building an application, then the target is a .app, not .dxe
-#
-!IF "$(COMPONENT_TYPE)" == "APPLICATION"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).app
-!ELSE IF "$(COMPONENT_TYPE)" == "PE32_PEIM"
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).pei
-!ELSE
-TARGET_FFS_FILE = $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).dxe
-!ENDIF
-
-#
-# Take the .efi file and make a .pe32 file
-#
-$(TARGET_PE32) : $(TARGET_EFI)
- $(GENSECTION) -I $(TARGET_EFI) -O $(TARGET_PE32) -S EFI_SECTION_PE32
-
-#
-# Create the user interface section
-#
-$(TARGET_UI) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_UI) -S EFI_SECTION_USER_INTERFACE -A "$(BASE_NAME)"
-
-#
-# Create the version section
-#
-!IF "$(BUILD_NUMBER)" != ""
-!IF "$(VERSION_STRING)" != ""
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER) -A "$(VERSION_STRING)"
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- $(GENSECTION) -O $(TARGET_VER) -S EFI_SECTION_VERSION -V $(BUILD_NUMBER)
-!ENDIF
-!ELSE
-$(TARGET_VER) : $(INF_FILENAME)
- echo. > $(TARGET_VER)
- type $(TARGET_VER) > $(TARGET_VER)
-!ENDIF
-
-#
-# Makefile entries to create the dependency expression section.
-# Use the DPX file from the source directory unless an override file
-# was specified.
-# If no DPX source file was specified, then create an empty file to
-# be used.
-#
-!IF "$(DPX_SOURCE)" != ""
-DPX_SOURCE_FILE = $(SOURCE_DIR)\$(DPX_SOURCE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_OVERRIDE)" != ""
-DPX_SOURCE_FILE = $(DPX_SOURCE_OVERRIDE)
-!ENDIF
-
-!IF "$(DPX_SOURCE_FILE)" != ""
-!IF EXIST ($(DPX_SOURCE_FILE))
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(BASE_NAME)dxs.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
-
-!IF EXIST($(TARGET_DPX))
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(BASE_NAME)dxs.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(TARGET_DPX)
- $(MAKEDEPS) -f $(DPX_SOURCE_FILE) $(DEP_FLAGS)
-
-!ENDIF
-
-$(TARGET_DPX) : $(DPX_SOURCE_FILE) $(INF_FILENAME)
-!IF "$(EFI_USE_CL_FOR_DEP)" != "YES"
- $(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) > $*.tmp1
-!ELSE
- -$(CC) $(C_FLAGS_DPX) $(DPX_SOURCE_FILE) /showIncludes > $*.tmp1 2> $(DEST_DIR)\$(BASE_NAME)dxs.cl
- @$(MAKEDEPS) -f $(DEST_DIR)\$(BASE_NAME)dxs.cl $(DEP_FLAGS2)
-!ENDIF
- $(GENDEPEX) -I $*.tmp1 -O $*.tmp2
- $(GENSECTION) -I $*.tmp2 -O $@ -S $(DEPEX_TYPE)
- del $*.tmp1 > NUL
- del $*.tmp2 > NUL
-!ELSE
-!ERROR Dependency expression source file "$(DPX_SOURCE_FILE)" does not exist.
-!ENDIF
-!ELSE
-$(TARGET_DPX) : $(INF_FILENAME)
- echo. > $(TARGET_DPX)
- type $(TARGET_DPX) > $(TARGET_DPX)
-!ENDIF
-
-#
-# Build a FFS file from the sections and package
-#
-$(TARGET_FFS_FILE) : $(TARGET_PE32) $(TARGET_DPX) $(TARGET_UI) $(TARGET_VER) $(PACKAGE_FILENAME)
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-all : $(TARGET_FFS_FILE)
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-[Compile.Ia32.Bin|Bmp,Compile.x64.Bin|Bmp,Compile.Ipf.Bin|Bmp]
-#
-# We simply define the binary source file name
-#
-BINARY_SOURCE_FILE = $(SOURCE_FILE_NAME)
-
-[=============================================================================]
-[Build.Ia32.BINARY|Legacy16|Logo,Build.Ipf.BINARY|Legacy16|Logo,Build.x64.BINARY|Legacy16|Logo]
-#
-# Use GenFfsFile to convert it to an FFS file
-#
-$(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).ffs : $(BINARY_SOURCE_FILE) $(PACKAGE_FILENAME) $(INF_FILENAME)
- $(GENSECTION) -I $(BINARY_SOURCE_FILE) -O $(DEST_DIR)\$(BASE_NAME).sec -S EFI_SECTION_RAW
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-all : $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).ffs
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-[Build.Ia32.RAWFILE|CONFIG,Build.Ipf.RAWFILE|CONFIG,Build.x64.RAWFILE|CONFIG]
-#
-# Use GenFfsFile to convert it to an raw FFS file
-#
-$(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).raw : $(BINARY_SOURCE_FILE) $(PACKAGE_FILENAME) $(INF_FILENAME)
- copy $(BINARY_SOURCE_FILE) $(DEST_DIR)\$(BASE_NAME).bin /Y
- $(GENFFSFILE) -B $(DEST_DIR) -P1 $(PACKAGE_FILENAME) -V
-
-all : $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).raw
-
-#
-# Remove the generated temp and final files for this modules.
-#
-clean :
-!IF ("$(FILE_GUID)" != "")
- @if exist $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).* del $(BIN_DIR)\$(FILE_GUID)-$(BASE_NAME).*
-!ENDIF
- @if exist $(BIN_DIR)\$(BASE_NAME).* del $(BIN_DIR)\$(BASE_NAME).*
- @del /q $(DEST_OUTPUT_DIRS)
-
-[=============================================================================]
-#
-# These are commands to compile unicode .uni files.
-#
-[=============================================================================]
-[Compile.Ia32.Uni,Compile.Ipf.Uni,Compile.Ebc.Uni,Compile.x64.Uni]
-#
-# Emit an error message if the file's base name is the same as the
-# component base name. This causes build issues.
-#
-!IF "$(FILE)" == "$(BASE_NAME)"
-!ERROR Component Unicode string file name cannot be the same as the component BASE_NAME.
-!ENDIF
-
-#
-# Always create dep file for uni file as it can be created at the same time when
-# strgather is parsing uni file.
-#
-DEP_FILE = $(DEST_DIR)\$(FILE)Uni.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-$(DEST_DIR)\$(FILE).sdb : $(SOURCE_FILE_NAME) $(INF_FILENAME)
- $(STRGATHER) -parse -newdb -db $(DEST_DIR)\$(FILE).sdb -dep $(DEP_FILE) $(INC) $(SOURCE_FILE_NAME)
-
-SDB_FILES = $(SDB_FILES) $(DEST_DIR)\$(FILE).sdb
-STRGATHER_FLAGS = $(STRGATHER_FLAGS) -db $(DEST_DIR)\$(FILE).sdb
-LOCALIZE = YES
-
-[=============================================================================]
-[Compile.Ia32.hfr,Compile.Ipf.hfr,Compile.Ebc.hfr,Compile.x64.hfr]
-[=============================================================================]
-[Compile.Ia32.Vfr,Compile.Ipf.Vfr,Compile.x64.Vfr]
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(FILE)Vfr.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE)Vfr.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS)
-
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(FILE).hpk
-
-#
-# Add a dummy command for building the HII pack file. In reality, it's built
-# below, but the C_FLAGS macro reference the target as $@, so you can't specify
-# the obj and hpk files as dual targets of the same command.
-#
-$(DEST_DIR)\$(FILE).hpk : $(DEST_DIR)\$(FILE).obj
-
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
- $(VFRCOMPILE) $(VFRCOMPILE_FLAGS) $(INC) -ibin -od $(DEST_DIR)\$(SOURCE_RELATIVE_PATH) \
- -l $(VFR_FLAGS) $(SOURCE_FILE_NAME)
- $(CC) $(C_FLAGS) $(DEST_DIR)\$(FILE).c
-
-[=============================================================================]
-[Compile.Ebc.Vfr]
-
-DEP_FILE = $(DEST_DIR)\$(FILE)Vfr.dep
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE)Vfr.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS)
-
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(FILE).hpk
-
-#
-# Add a dummy command for building the HII pack file. In reality, it's built
-# below, but the C_FLAGS macro reference the target as $@, so you can't specify
-# the obj and hpk files as dual targets of the same command.
-#
-$(DEST_DIR)\$(FILE).hpk : $(DEST_DIR)\$(FILE).obj
-
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
- $(VFRCOMPILE) $(VFRCOMPILE_FLAGS) $(INC) -ibin -od $(DEST_DIR)\$(SOURCE_RELATIVE_PATH) \
- -l $(VFR_FLAGS) $(SOURCE_FILE_NAME)
- $(EBC_CC) $(EBC_C_FLAGS) $(DEST_DIR)\$(FILE).c
-
-[=============================================================================]
-#
-# Commands for building IFR as uncompressed binary into the FFS file. To
-# use it, set COMPILE_SELECT=.vfr=Ifr_Bin for the component in the DSC file.
-#
-[=============================================================================]
-[Compile.Ia32.Ifr_Bin,Compile.Ipf.Ifr_Bin,Compile.x64.Ifr_Bin]
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(FILE)Vfr.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE)Vfr.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS)
-
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(FILE).hpk
-
-#
-# Add a dummy command for building the HII pack file. In reality, it's built
-# below, but the C_FLAGS macro reference the target as $@, so you can't specify
-# the obj and hpk files as dual targets of the same command.
-#
-$(DEST_DIR)\$(FILE).hpk : $(DEST_DIR)\$(FILE).obj
-
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
- $(VFRCOMPILE) $(VFRCOMPILE_FLAGS) $(INC) -ibin -od $(DEST_DIR)\$(SOURCE_RELATIVE_PATH) \
- -l $(VFR_FLAGS) $(SOURCE_FILE_NAME)
- $(CC) $(C_FLAGS) $(DEST_DIR)\$(FILE).c
-
-#
-# Add to the variable that contains the list of VFR binary files we're going
-# to merge together at the end of the build.
-#
-HII_IFR_PACK_FILES = $(HII_IFR_PACK_FILES) $(DEST_DIR)\$(FILE).hpk
-
-[=============================================================================]
-#
-# Commands for building IFR as uncompressed binary into the FFS file. To
-# use it, set COMPILE_SELECT=.vfr=Ifr_Bin for the component in the DSC file.
-#
-[=============================================================================]
-[Compile.Ebc.Ifr_Bin]
-
-#
-# Add build dependency check
-#
-DEP_FILE = $(DEST_DIR)\$(FILE)Vfr.dep
-
-!IF EXIST($(DEP_FILE))
-!INCLUDE $(DEP_FILE)
-!ENDIF
-
-!IF EXIST($(DEST_DIR)\$(FILE).obj)
-DEP_TARGETS = $(DEP_TARGETS) $(DEST_DIR)\$(FILE)Vfr.dep
-!IF !EXIST($(DEP_FILE))
-CREATEDEPS = YES
-!ENDIF
-!ENDIF
-
-#
-# Update dep file for next round incremental build
-#
-$(DEP_FILE) : $(DEST_DIR)\$(FILE).obj
- $(MAKEDEPS) -f $(SOURCE_FILE_NAME) $(DEP_FLAGS)
-
-HII_PACK_FILES = $(HII_PACK_FILES) $(DEST_DIR)\$(FILE).hpk
-
-#
-# Add a dummy command for building the HII pack file. In reality, it's built
-# below, but the C_FLAGS macro reference the target as $@, so you can't specify
-# the obj and hpk files as dual targets of the same command.
-#
-$(DEST_DIR)\$(FILE).hpk : $(DEST_DIR)\$(FILE).obj
-
-$(DEST_DIR)\$(FILE).obj : $(SOURCE_FILE_NAME) $(INF_FILENAME) $(ALL_DEPS)
- $(VFRCOMPILE) $(VFRCOMPILE_FLAGS) $(INC) -ibin -od $(DEST_DIR)\$(SOURCE_RELATIVE_PATH) \
- -l $(VFR_FLAGS) $(SOURCE_FILE_NAME)
- $(EBC_CC) $(EBC_C_FLAGS) $(DEST_DIR)\$(FILE).c
-
-#
-# Add to the variable that contains the list of VFR binary files we're going
-# to merge together at the end of the build.
-#
-HII_IFR_PACK_FILES = $(HII_IFR_PACK_FILES) $(DEST_DIR)\$(FILE).hpk
-
-[=============================================================================]
-[Compile.Ia32.Fv,Compile.Ipf.Fv,Compile.x64.Fv]
-#
-# Run GenSection on the firmware volume image.
-#
-$(DEST_DIR)\$(SOURCE_FV)Fv.sec : $(SOURCE_FILE_NAME) $(INF_FILENAME)
- $(GENSECTION) -I $(SOURCE_FILE_NAME) -O $(DEST_DIR)\$(SOURCE_FV)Fv.sec -S EFI_SECTION_FIRMWARE_VOLUME_IMAGE
-
-[=============================================================================]
|