diff options
Diffstat (limited to 'EdkCompatibilityPkg')
15 files changed, 0 insertions, 2037 deletions
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env deleted file mode 100644 index 51ce1dd6a5..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env +++ /dev/null @@ -1,33 +0,0 @@ -#/*++
-#
-# Copyright (c) 2006 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# Config.env
-#
-# Abstract:
-#
-# This file is used to define platform build configuration.
-# It gets included by PlatformTools.env.
-#
-#--*/
-
-BUILD_TARGET_DIRECTORY = Build
-EFI_DEBUG = NO
-EFI_DEBUG_CLEAR_MEMORY = NO
-EFI_PEI_PERFORMANCE = NO
-EFI_DXE_PERFORMANCE = NO
-EFI_SYMBOLIC_DEBUG = NO
-EFI_GENERATE_INTERMEDIATE_FILE = NO
-EFI_PEI_REPORT_STATUS_CODE = NO
-UEFI_MODE = YES
-PI_MODE = YES
-USE_VC8 = NO
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc deleted file mode 100644 index 303e7a6284..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc +++ /dev/null @@ -1,102 +0,0 @@ -#/*++
-#
-# Copyright (c) 2004 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# Ia32.dsc
-#
-# Abstract:
-#
-# This is the build description file containing the platform
-# build definitions.
-#
-#
-# Notes:
-#
-# The info in this file is broken down into sections. The start of a section
-# is designated by a "[" in the first column. So the [=====] separater ends
-# a section.
-#
-#--*/
-
-
-[=============================================================================]
-#
-# This section gets processed first by the utility. Define any
-# macros that you may use elsewhere in this description file. This is the
-# mechanism by which you can pass parameters and defines to the makefiles
-# generated for each component. You can define it here, and then make an
-# assignment in the [makefile.common] section. For example, if here you
-# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in
-# the [makefile.common] section and it becomes MY_VAR = my_var_value in
-# the output makefiles for each component.
-#
-[Defines]
-PLATFORM = $(PROJECT_NAME)
-
-[=============================================================================]
-#
-# Include other common build descriptions
-#
-!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"
-!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"
-
-[=============================================================================]
-#
-# These control the generation of the FV files
-#
-[=============================================================================]
-[Fv.Fv.Attributes]
-
-[Fv.Fv.options]
-
-[Build.Fv.Fv]
-
-[=============================================================================]
-#
-# These are the libraries that will be built by the master makefile
-#
-[=============================================================================]
-[Libraries]
-DEFINE EDK_PREFIX=
-
-!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"
-
-#
-# EdkII Glue Library
-#
-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"
-
-[=============================================================================]
-#
-# These are platform specific libraries that must be built prior to building
-# certain drivers that depend upon them.
-#
-[=============================================================================]
-[Libraries.Platform]
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf
-
-#Other\Maintained\Application\Shell\Library\EfiShellLib.inf
-
-[=============================================================================]
-#
-# These are the components that will be built by the master makefile
-#
-[=============================================================================]
-[Components]
-DEFINE PACKAGE=Default
-
-#Add EDK INF file here:
-#Other\Maintained\Application\Shell\ShellFull.inf
-
-[=============================================================================]
-
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile deleted file mode 100644 index 8ad8646dc4..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile +++ /dev/null @@ -1,231 +0,0 @@ -#/*++
-#
-# Copyright (c) 2004 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# Makefile
-#
-# Abstract:
-#
-# This makefile is used to build the NT emulation.
-#
-#--*/
-
-#
-# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined
-#
-!IFNDEF EDK_SOURCE
-!ERROR EDK_SOURCE environmental variable not set
-!ENDIF
-
-!IFNDEF EDK_TOOLS_PATH
-!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used
-!ENDIF
-
-#
-# Set the processor type
-#
-PROCESSOR = IA32
-
-#
-# Define a toolchain so we can pick up the basic defines from
-# the EFI tool setup file.
-#
-TOOLCHAIN = TOOLCHAIN_MSVC
-
-!INCLUDE PlatformTools.env
-
-#
-# Default target
-#
-all : customer
-
-#
-# Target to build customer config
-#
-customer : tempstamp_file build_tools makefiles builds
-
-#
-# Target to build everything quickly
-#
-fast : build_tools fast_makefiles builds
-
-#
-# Create a file to store the date and time, and used by SetStamp.exe
-#
-tempstamp_file:
-!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP)
- @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt
-!ELSEIF EXIST(GenStamp.txt)
- - @del GenStamp.txt
-!ENDIF
-
-#
-# Make all the EFI build tools by calling the makefile
-#
-build_tools :
- -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)
- -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)
- $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)
- $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt
-
-#
-# Run ProcessDsc on our main description files to generate the
-# makefiles and package files. Specify -v option for more verbose output.
-# Specify "-xref filename" to generate a cross-reference file of
-# basename-to-fileguid that can be used by VolInfo.
-#
-makefiles :
- $(PROCESSDSC) \
- -d EFI_SOURCE=$(EDK_SOURCE) \
- -d EDK_SOURCE=$(EDK_SOURCE) \
- -d PROCESSOR=$(PROCESSOR) \
- -d PROJECT_NAME=$(PROJECT_NAME) \
- -d COMPRESS_METHOD=$(COMPRESS_METHOD) \
- -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \
- -d SHELL_INF=$(SHELL_INF) \
- -d UEFI_PREFIX=$(UEFI_PREFIX) \
- -d PI_PREFIX=$(PI_PREFIX) \
- -d CAPSULE_INF=$(CAPSULE_INF) \
- -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \
- -d DEVPATH_INF=$(DEVPATH_INF) \
- -d GRAPHICS_INF=$(GRAPHICS_INF) \
- -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \
- -xref FV\Guid.xref \
- $(PROJECT_NAME).dsc
-
-#
-# Build faster by not building components with FV=NULL. Override in the
-# DSC file by adding SKIP_FV_NULL=0 on the component lines you want built
-# but still have FV=NULL. For example:
-#
-# Dxe\Drivers\MyDriver\MyDriver.inf FV=NULL SKIP_FV_NULL=0
-#
-fast_makefiles :
- $(PROCESSDSC) \
- -d EFI_SOURCE=$(EDK_SOURCE) \
- -d EDK_SOURCE=$(EDK_SOURCE) \
- -d PROCESSOR=$(PROCESSOR) \
- -d PROJECT_NAME=$(PROJECT_NAME) \
- -d COMPRESS_METHOD=$(COMPRESS_METHOD) \
- -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \
- -d SHELL_INF=$(SHELL_INF) \
- -d UEFI_PREFIX=$(UEFI_PREFIX) \
- -d PI_PREFIX=$(PI_PREFIX) \
- -d CAPSULE_INF=$(CAPSULE_INF) \
- -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \
- -d DEVPATH_INF=$(DEVPATH_INF) \
- -d GRAPHICS_INF=$(GRAPHICS_INF) \
- -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \
- -xref FV\Guid.xref \
- -d SKIP_FV_NULL=1 \
- $(PROJECT_NAME).dsc
-
-#
-# Create the guid-to-basename cross reference file of protocols
-# used by volinfo for decoding dependency expressions.
-#
-protocols.xref :
- -@if not exist fv mkdir FV
- cd $(EDK_SOURCE)
- $(GUIDCHK) -g -u $(BUILD_TARGET_DIRECTORY) -e inf -x > $(BUILD_DIR)\Fv\protocols.xref
- cd $(BUILD_DIR)
-
-#
-# Call all the makefiles that were generated by ProcessDsc. ProcessDsc
-# creates the makefile.out that calls all the component makefiles.
-#
-builds :
- $(MAKE) -f makefile.out
-
-#
-# Useful targets
-#
-
-#
-# Define a pseudo-target that skips over compiling the build tools and
-# also skips creation of the makefiles for the components. The user
-# has to be aware that any changes to INF files renders this target
-# invalid.
-#
-quick : builds
-
-#
-# Define a pseudo-target to start building with the libraries or with the
-# components.
-#
-libraries :
- $(MAKE) -f makefile.out libraries
-
-components :
- $(MAKE) -f makefile.out components
-
-#
-# Make a pseudo-target to simplify running of the NT emulation.
-#
-!IF "$(EFI_WIN_NT_FILE_SYSTEM)" == ""
-EFI_WIN_NT_FILE_SYSTEM = $(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps
-!ELSE
-EFI_WIN_NT_FILE_SYSTEM = $(EFI_WIN_NT_FILE_SYSTEM)!$(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps
-!ENDIF
-
-#
-# Make browse info file
-#
-bsc:
- - dir /s /b *.sbr > $(PROCESSOR)\temp.rm
- $(BSCMAKE) /n /o $(PROCESSOR)\$(PROJECT_NAME).bsc "@$(PROCESSOR)\temp.rm"
-
-#
-# Create a target to clean up all build directories
-#
-clean :
- - @if exist vc??.* del vc??.* > NUL
- - @if exist *.bak del *.bak > NUL
- - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL
- - @if exist ipf rd /s /q ipf > NUL
- - @if exist ebc rd /s /q ebc > NUL
- - @if exist fv rd /s /q fv > NUL
- - @if exist Tools rd /s /q Tools > NUL
- - @if exist makefile.out del makefile.out > NUL
- - @if exist module.* del module.* > NUL
- - @echo All targets cleaned
-
-#
-# Clean up all build directories except for tools.
-#
-cleanbuilds :
- - @if exist *.bak del *.bak > NUL
- - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL
- - @if exist ipf rd /s /q ipf > NUL
- - @if exist ebc rd /s /q ebc > NUL
- - @if exist fv rd /s /q fv > NUL
- - @if exist makefile.out del makefile.out > NUL
- - @if exist module.* del module.* > NUL
- - @echo All modules cleaned
-
-#
-# Clean up only the tools
-#
-cleantools :
- - @if exist vc??.* del vc??.* > NUL
- - @if exist Tools rd /s /q Tools > NUL
- - @echo All tools cleaned
-
-#
-# Rebuild target, clean and build all
-#
-rebuild : clean all
-
-#
-# cleanall target to clean all build directories.
-#
-cleanall : clean
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env deleted file mode 100644 index 224783c39c..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env +++ /dev/null @@ -1,68 +0,0 @@ -#/*++
-#
-# Copyright (c) 2004 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# PlatformTools.env
-#
-# Abstract:
-#
-# This file is used to define platform specific environment variables.
-# It gets included by every makefile.
-#
-#--*/
-
-!INCLUDE Config.env
-
-#
-# Set the project name
-#
-PROJECT_NAME = Ia32
-
-#
-# Set the build directory
-#
-BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)
-
-!IF "$(UEFI_MODE)" == "YES"
-GRAPHICS_INF = Sample\Bus\WinNtThunk\Gop\Dxe\WinNtGop.inf
-!ELSE
-GRAPHICS_INF = Sample\Bus\WinNtThunk\Uga\Dxe\WinNtUga.inf
-!ENDIF
-
-#
-# Define compiler names
-#
-!IFNDEF EDK_TOOLS_PATH
-EFI_ASL_LOCAL = YES
-!ELSE
-EFI_ASSEMBLER_NAME = Masm611
-EFI_ASL_LOCAL = NO
-!ENDIF
-
-#
-# These flags are specific to this platform. If a flag is not specific to this
-# platform the flag should be placed in the CommonTools.env file.
-# Processor architecture specific and global macros can be found in
-# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.
-#
-C_PROJ_FLAGS = /O1 /D UNICODE /D NEW_PEI_HOBS
-ASM_PROJ_FLAGS = /Cx /Zd /Fl$*.lst
-LINK_PROJ_FLAGS =
-LIB_PROJ_FLAGS =
-EBC_C_PROJ_FLAGS =
-EBC_LINK_PROJ_FLAGS =
-EBC_LIB_PROJ_FLAGS =
-
-#
-# Include processor architecture specific and general Tiano build flags.
-#
-!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat deleted file mode 100644 index c224c2ee74..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat +++ /dev/null @@ -1,304 +0,0 @@ -@rem #/*++
-@rem #
-@rem # Copyright (c) 2007, Intel Corporation
-@rem # All rights reserved. This program and the accompanying materials
-@rem # are licensed and made available under the terms and conditions of the BSD License
-@rem # which accompanies this distribution. The full text of the license may be found at
-@rem # http://opensource.org/licenses/bsd-license.php
-@rem #
-@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-@rem #
-@rem # Module Name:
-@rem #
-@rem # build.bat
-@rem #
-@rem # Abstract:
-@rem #
-@rem # This script provides single module build, clean and find function
-@rem # based on module name.
-@rem #
-@rem # The auto-generated module.list file records all module names
-@rem # described in the current platform.dsc.
-@rem #
-@rem #--*/
-
-@echo off
-
-setlocal
-@rem initilize local variable
-set FUNCTION=build
-set MODULE=
-set UPDATE=
-set VERBOSE=
-
-:parse
-if /I "%1"=="/c" (
- set FUNCTION=clean
- shift
- goto parse
-)
-if /I "%1"=="clean" (
- set FUNCTION=clean
- shift
- goto parse
-)
-if /I "%1"=="/r" (
- set FUNCTION=rebuild
- shift
- goto parse
-)
-if /I "%1"=="/h" (
- set FUNCTION=usage
- shift
- goto parse
-)
-if /I "%1"=="/?" (
- set FUNCTION=usage
- shift
- goto parse
-)
-if /I "%1"=="/f" (
- set FUNCTION=find
- shift
- goto parse
-)
-if /I "%1"=="/a" (
- set UPDATE=TRUE
- shift
- goto parse
-)
-if /I "%1"=="/v" (
- set VERBOSE=TRUE
- shift
- goto parse
-)
-if not "%1"=="" (
- set MODULE=%1
- shift
- goto parse
-) else (
- @rem no other paramters
- if "%FUNCTION%"=="rebuild" goto build
- goto %FUNCTION%
-)
-
-:build
-set StartTime=%time%
-@rem if no input, build all
-if "%MODULE%"=="" (
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile clean
- )
- nmake -nologo -f Makefile all
- goto endtime
-)
-@rem then try to build special targets: all, fast, tools.
-if /I "%MODULE%"=="all" (
- @rem build all modules and tools.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile cleanall
- )
- nmake -nologo -f Makefile all
- goto endtime
-)
-if /I "%MODULE%"=="fast" (
- @rem build fast target to skip FV=NULL modules.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile clean
- )
- nmake -nologo -f Makefile fast
- goto endtime
-)
-if /I "%MODULE%"=="tools" (
- @rem build all tools.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile cleantools
- )
- nmake -nologo -f Makefile build_tools
- echo.
- echo All tools are built.
- goto endtime
-)
-@rem build single module, update build makefiles
-if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f module.mak %MODULE%Clean 2>NUL
-)
-nmake -nologo -f Makefile flashmap > NUL 2>&1
-nmake -nologo -f Makefile makefiles
-if errorlevel 1 goto builderror
-@rem check whether input module name is described in current dsc file.
-findstr /I /C:" %MODULE% " module.list > NUL
-if errorlevel 1 (
- echo.
- echo.
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto finderror
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- echo.
- echo Warning!!! Your specified module name can't be found.
- echo One of the above modules may be what you want to build.
- goto end
-)
-@rem build this module
-nmake -nologo -f module.mak %MODULE%Build
-echo.
-if "%FUNCTION%"=="rebuild" (
- echo Module %MODULE% is rebuilt.
-) else (
- echo Module %MODULE% is built.
-)
-:endtime
-@rem output build time.
-set EndTime=%time%
-echo.
-echo Start time %StartTime%
-echo End time %EndTime%
-goto end
-
-:clean
-@rem if no input, default clean all build directories.
-if "%MODULE%"=="" (
- nmake -nologo -f Makefile clean
- goto end
-)
-@rem first try to clean special tasks: all, modules and tools
-if /I "%MODULE%"=="all" (
- nmake -nologo -f Makefile cleanall
- goto end
-)
-if /I "%MODULE%"=="modules" (
- nmake -nologo -f Makefile cleanbuilds
- goto end
-)
-if /I "%MODULE%"=="tools" (
- nmake -nologo -f Makefile cleantools
- goto end
-)
-@rem clean single module
-@rem check whether input module name is in module.list file.
-if not exist module.list (
- echo Module list info doesn't exist.
- echo Processing dsc file to generate module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-findstr /I /C:" %MODULE% " module.list > NUL
-if errorlevel 1 (
- echo.
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto finderror
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- echo.
- echo Warning!!! Your specified module name can't be found.
- echo One of the above modules may be what you want to clean.
- goto end
-)
-@rem clean this module
-nmake -nologo -f module.mak %MODULE%Clean 2>NUL
-echo.
-echo Module %MODULE% is cleaned.
-goto end
-
-:find
-@rem find match module name by subname.
-if "%UPDATE%"=="TRUE" (
- echo Processing dsc file to update module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-if not exist module.list (
- echo Module list info doesn't exist.
- echo Processing dsc file to generate module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-if "%MODULE%"=="" (
- @rem display all
- echo.
- if "%VERBOSE%"=="TRUE" (
- type module.list
- ) else (
- @rem only output module name without module.inf file name
- for /F %%A in (module.list) do echo %%A
- )
-) else (
- @rem display match module name
- echo.
- if "%VERBOSE%"=="TRUE" (
- findstr /I /C:"%MODULE%" module.list
- if errorlevel 1 goto notfind
- ) else (
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto notfind
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- )
-)
-goto end
-
-:usage
-echo build or clean single module based on module name after tools are built.
-echo.
-echo build [/r] [/c] [/f] [/h] [modulename]
-echo.
-echo build [/r] [modulename]
-echo build single module, such as build DxeMain.
-echo If /r is specified, the target will be rebuit after cleaned first.
-echo if no input modulename or modulename is all, then build all
-echo Specail build targets: all, fast, tools.
-echo These special targets may not exist in your tip main makefile.
-echo build - build all tools and modules
-echo build all - build all tools and modules
-echo build fast - build all without FV=NULL modules
-echo build tools - build all tools.
-echo.
-echo build /c [modulename]
-echo build clean [modulename]
-echo remove the temp generated files for single module
-echo if no input modulename, then clean all
-echo Specail clean targets: all, modules, tools.
-echo These special targets may not exist in your tip main makefile.
-echo build /c - clean up all build directories
-echo build /c all - clean up all build directories and binary dirs.
-echo build /c modules - clean up all build directories except for tools.
-echo build /c tools - clean up only tools directory.
-echo.
-echo build /f [/a] [/v] [subname]
-echo find all matched modulename with the sub string of module name.
-echo option /a re-processes dsc files to update module name list.
-echo option /v outputs module name and module.inf file name both.
-echo.
-echo build /h
-echo build /?
-echo display help information.
-echo.
-goto end
-
-:notfind
-echo Warning!!! Your specified module name can't be found.
-echo Try to use /f /a options to update module name list.
-goto end
-
-:finderror
-echo Warning!!! Your specified module name can't be found.
-echo Try to use /f to find modules that you want to build.
-echo Or use /h to get the helpinfo of this script.
-goto end
-
-:builderror
-if exist error.log type error.log
-echo.
-if not exist Tools\ProcessDsc.exe (
- echo.
- echo Error!!! Build tools may not be ready. Try to build tools first.
- echo.
-)
-del module.* > NUL 2>&1
-goto end
-
-:end
-if exist error.log del error.log
-echo on
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env deleted file mode 100644 index d294b50c6d..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env +++ /dev/null @@ -1,31 +0,0 @@ -#/*++
-#
-# Copyright (c) 2006 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# Config.env
-#
-# Abstract:
-#
-# This file is used to define platform build configuration.
-# It gets included by PlatformTools.env.
-#
-#--*/
-
-BUILD_TARGET_DIRECTORY = Build
-EFI_DEBUG = NO
-EFI_DEBUG_CLEAR_MEMORY = NO
-EFI_SYMBOLIC_DEBUG = NO
-EFI_GENERATE_INTERMEDIATE_FILE = NO
-UEFI_MODE = YES
-USE_VC8 = NO
-USE_VC8_IPF = NO
-USE_NEWDDK = YES
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc deleted file mode 100644 index d1574df403..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc +++ /dev/null @@ -1,102 +0,0 @@ -#/*++
-#
-# Copyright (c) 2004 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# IPF.dsc
-#
-# Abstract:
-#
-# This is the build description file containing the platform
-# specific build definitions.
-#
-#
-# Notes:
-#
-# The info in this file is broken down into sections. The start of a section
-# is designated by a "[" in the first column. So the [=====] separater ends
-# a section.
-#
-#--*/
-
-
-[=============================================================================]
-#
-# This section gets processed first by the utility. Define any
-# macros that you may use elsewhere in this description file. This is the
-# mechanism by which you can pass parameters and defines to the makefiles
-# generated for each component. You can define it here, and then make an
-# assignment in the [makefile.common] section. For example, if here you
-# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in
-# the [makefile.common] section and it becomes MY_VAR = my_var_value in
-# the output makefiles for each component.
-#
-[Defines]
-PLATFORM=$(PROJECT_NAME)
-
-
-[=============================================================================]
-#
-# Include other common build descriptions
-#
-!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"
-!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"
-
-
-
-[=============================================================================]
-[Fv.Fv.Attributes]
-
-[Fv.Fv.options]
-
-[build.fv.Fv]
-
-[=============================================================================]
-#
-# These are the libraries that will be built by the master makefile
-#
-[=============================================================================]
-[Libraries]
-DEFINE EDK_PREFIX=
-
-!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"
-
-#
-# EdkII Glue Library
-#
-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"
-
-[=============================================================================]
-#
-# These are platform specific libraries that must be built prior to building
-# certain drivers that depend upon them.
-#
-[=============================================================================]
-[Libraries.Platform]
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsSerialStatusCode\BsSerialStatusCode.inf
-
-#Other\Maintained\Application\Shell\Library\EfiShellLib.inf
-
-[=============================================================================]
-#
-# These are the components that will be built by the master makefile
-#
-[=============================================================================]
-[Components]
-DEFINE PACKAGE=Default
-
-#Add EDK INF file here:
-#Other\Maintained\Application\Shell\Shell.inf
-
-
-[=============================================================================]
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile deleted file mode 100644 index 7df7d84cbf..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile +++ /dev/null @@ -1,140 +0,0 @@ -#/*++
-#
-# Copyright (c) 2004 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# Makefile
-#
-# Abstract:
-#
-# This makefile is used to build the IPF build tip.
-#
-#--*/
-
-#
-# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined
-#
-!IFNDEF EDK_SOURCE
-!ERROR EDK_SOURCE environmental variable not set
-!ENDIF
-
-!IFNDEF EDK_TOOLS_PATH
-!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used
-!ENDIF
-
-#
-# Set the processor type
-#
-PROCESSOR = IPF
-
-#
-# Define a toolchain so we can pick up the basic defines from
-# the EFI tool setup file.
-#
-TOOLCHAIN = TOOLCHAIN_MSVC
-
-!INCLUDE PlatformTools.env
-
-#
-# Target to build customer config
-#
-all : tempstamp_file build_tools makefiles builds
-
-#
-# Create a file to store the date and time, and used by SetStamp.exe
-#
-tempstamp_file:
-!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP)
- @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt
-!ELSEIF EXIST(GenStamp.txt)
- - @del GenStamp.txt
-!ENDIF
-
-#
-# Make all the EFI build tools by calling the makefile
-#
-build_tools :
- -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)
- -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)
- $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)
- $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt
-
-#
-# Run the utility that processes our description files and generates the
-# makefiles. Specify -v option for more verbose output.
-# Specify "-xref filename" to generate a cross-reference file of
-# basename-to-fileguid that can be used by VolInfo.
-#
-makefiles :
- $(PROCESSDSC) \
- -d EFI_SOURCE=$(EDK_SOURCE) \
- -d EDK_SOURCE=$(EDK_SOURCE) \
- -d PROCESSOR=$(PROCESSOR) \
- -d PROJECT_NAME=$(PROJECT_NAME) \
- -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \
- -d COMPRESS_METHOD=$(COMPRESS_METHOD) \
- -d UEFI_PREFIX=$(UEFI_PREFIX) \
- -d PI_PREFIX=$(PI_PREFIX) \
- -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \
- $(PROJECT_NAME).dsc
-
-
-#
-# Call all the makefiles that were generated by ProcessDsc. ProcessDsc
-# creates the makefile.out that calls all the component makefiles.
-#
-builds :
- $(MAKE) -f makefile.out libraries
- $(MAKE) -f makefile.out components
-
-#
-# Create a target to clean up all build directories
-#
-clean :
- - @if exist vc??.* del vc??.* > NUL
- - @if exist *.bak del *.bak > NUL
- - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL
- - @if exist ebc rd /s /q ebc > NUL
- - @if exist fv rd /s /q fv > NUL
- - @if exist Tools rd /s /q Tools > NUL
- - @if exist makefile.out del makefile.out > NUL
- - @if exist module.* del module.* > NUL
- - @echo All targets cleaned
-
-#
-# Clean up all build directories except for tools.
-#
-cleanbuilds :
- - @if exist *.bak del *.bak > NUL
- - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL
- - @if exist ebc rd /s /q ebc > NUL
- - @if exist fv rd /s /q fv > NUL
- - @if exist makefile.out del makefile.out > NUL
- - @if exist module.* del module.* > NUL
- - @echo All modules cleaned
-
-#
-# Clean up only the tools
-#
-cleantools :
- - @if exist vc??.* del vc??.* > NUL
- - @if exist Tools rd /s /q Tools > NUL
- - @echo All tools cleaned
-
-#
-# Rebuild target, clean and build all
-#
-rebuild : clean all
-
-#
-# cleanall target to clean all build directories.
-#
-cleanall : clean
diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env deleted file mode 100644 index b12060e6d1..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env +++ /dev/null @@ -1,69 +0,0 @@ -#/*++
-#
-# Copyright (c) 2004 - 2006, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# PlatformTools.env
-#
-# Abstract:
-#
-# This file is used to define platform specific environment variables.
-# It gets included by every makefile.
-#
-#--*/
-
-!INCLUDE Config.env
-
-#
-# Set the project name
-#
-PROJECT_NAME = IPF
-
-#
-# Set the build directory
-#
-BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)
-
-#
-# Define compiler names
-#
-
-!IFNDEF EDK_TOOLS_PATH
-EFI_ASL_LOCAL = YES
-!ELSE
-!IF "$(USE_NEWDDK)" == "YES"
-EFI_COMPILER_NAME = DDK3790.1830
-EFI_ASSEMBLER_NAME = DDK3790.1830
-!ELSE
-EFI_COMPILER_NAME = DDK3790
-EFI_ASSEMBLER_NAME = DDK3790
-!ENDIF
-EFI_ASL_LOCAL = NO
-!ENDIF
-
-#
-# These flags are specific to this platform. If a flag is not specific to this
-# platform the flag should be placed in the CommonTools.env file.
-# Processor architecture specific and global macros can be found in
-# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.
-#
-C_PROJ_FLAGS = /Os
-ASM_PROJ_FLAGS =
-LINK_PROJ_FLAGS = /ALIGN:32
-LIB_PROJ_FLAGS =
-EBC_C_PROJ_FLAGS =
-EBC_LINK_PROJ_FLAGS =
-EBC_LIB_PROJ_FLAGS =
-
-#
-# Include processor architecture specific and general EFI build flags.
-#
-!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env
\ No newline at end of file diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat deleted file mode 100644 index c224c2ee74..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat +++ /dev/null @@ -1,304 +0,0 @@ -@rem #/*++
-@rem #
-@rem # Copyright (c) 2007, Intel Corporation
-@rem # All rights reserved. This program and the accompanying materials
-@rem # are licensed and made available under the terms and conditions of the BSD License
-@rem # which accompanies this distribution. The full text of the license may be found at
-@rem # http://opensource.org/licenses/bsd-license.php
-@rem #
-@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-@rem #
-@rem # Module Name:
-@rem #
-@rem # build.bat
-@rem #
-@rem # Abstract:
-@rem #
-@rem # This script provides single module build, clean and find function
-@rem # based on module name.
-@rem #
-@rem # The auto-generated module.list file records all module names
-@rem # described in the current platform.dsc.
-@rem #
-@rem #--*/
-
-@echo off
-
-setlocal
-@rem initilize local variable
-set FUNCTION=build
-set MODULE=
-set UPDATE=
-set VERBOSE=
-
-:parse
-if /I "%1"=="/c" (
- set FUNCTION=clean
- shift
- goto parse
-)
-if /I "%1"=="clean" (
- set FUNCTION=clean
- shift
- goto parse
-)
-if /I "%1"=="/r" (
- set FUNCTION=rebuild
- shift
- goto parse
-)
-if /I "%1"=="/h" (
- set FUNCTION=usage
- shift
- goto parse
-)
-if /I "%1"=="/?" (
- set FUNCTION=usage
- shift
- goto parse
-)
-if /I "%1"=="/f" (
- set FUNCTION=find
- shift
- goto parse
-)
-if /I "%1"=="/a" (
- set UPDATE=TRUE
- shift
- goto parse
-)
-if /I "%1"=="/v" (
- set VERBOSE=TRUE
- shift
- goto parse
-)
-if not "%1"=="" (
- set MODULE=%1
- shift
- goto parse
-) else (
- @rem no other paramters
- if "%FUNCTION%"=="rebuild" goto build
- goto %FUNCTION%
-)
-
-:build
-set StartTime=%time%
-@rem if no input, build all
-if "%MODULE%"=="" (
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile clean
- )
- nmake -nologo -f Makefile all
- goto endtime
-)
-@rem then try to build special targets: all, fast, tools.
-if /I "%MODULE%"=="all" (
- @rem build all modules and tools.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile cleanall
- )
- nmake -nologo -f Makefile all
- goto endtime
-)
-if /I "%MODULE%"=="fast" (
- @rem build fast target to skip FV=NULL modules.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile clean
- )
- nmake -nologo -f Makefile fast
- goto endtime
-)
-if /I "%MODULE%"=="tools" (
- @rem build all tools.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile cleantools
- )
- nmake -nologo -f Makefile build_tools
- echo.
- echo All tools are built.
- goto endtime
-)
-@rem build single module, update build makefiles
-if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f module.mak %MODULE%Clean 2>NUL
-)
-nmake -nologo -f Makefile flashmap > NUL 2>&1
-nmake -nologo -f Makefile makefiles
-if errorlevel 1 goto builderror
-@rem check whether input module name is described in current dsc file.
-findstr /I /C:" %MODULE% " module.list > NUL
-if errorlevel 1 (
- echo.
- echo.
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto finderror
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- echo.
- echo Warning!!! Your specified module name can't be found.
- echo One of the above modules may be what you want to build.
- goto end
-)
-@rem build this module
-nmake -nologo -f module.mak %MODULE%Build
-echo.
-if "%FUNCTION%"=="rebuild" (
- echo Module %MODULE% is rebuilt.
-) else (
- echo Module %MODULE% is built.
-)
-:endtime
-@rem output build time.
-set EndTime=%time%
-echo.
-echo Start time %StartTime%
-echo End time %EndTime%
-goto end
-
-:clean
-@rem if no input, default clean all build directories.
-if "%MODULE%"=="" (
- nmake -nologo -f Makefile clean
- goto end
-)
-@rem first try to clean special tasks: all, modules and tools
-if /I "%MODULE%"=="all" (
- nmake -nologo -f Makefile cleanall
- goto end
-)
-if /I "%MODULE%"=="modules" (
- nmake -nologo -f Makefile cleanbuilds
- goto end
-)
-if /I "%MODULE%"=="tools" (
- nmake -nologo -f Makefile cleantools
- goto end
-)
-@rem clean single module
-@rem check whether input module name is in module.list file.
-if not exist module.list (
- echo Module list info doesn't exist.
- echo Processing dsc file to generate module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-findstr /I /C:" %MODULE% " module.list > NUL
-if errorlevel 1 (
- echo.
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto finderror
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- echo.
- echo Warning!!! Your specified module name can't be found.
- echo One of the above modules may be what you want to clean.
- goto end
-)
-@rem clean this module
-nmake -nologo -f module.mak %MODULE%Clean 2>NUL
-echo.
-echo Module %MODULE% is cleaned.
-goto end
-
-:find
-@rem find match module name by subname.
-if "%UPDATE%"=="TRUE" (
- echo Processing dsc file to update module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-if not exist module.list (
- echo Module list info doesn't exist.
- echo Processing dsc file to generate module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-if "%MODULE%"=="" (
- @rem display all
- echo.
- if "%VERBOSE%"=="TRUE" (
- type module.list
- ) else (
- @rem only output module name without module.inf file name
- for /F %%A in (module.list) do echo %%A
- )
-) else (
- @rem display match module name
- echo.
- if "%VERBOSE%"=="TRUE" (
- findstr /I /C:"%MODULE%" module.list
- if errorlevel 1 goto notfind
- ) else (
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto notfind
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- )
-)
-goto end
-
-:usage
-echo build or clean single module based on module name after tools are built.
-echo.
-echo build [/r] [/c] [/f] [/h] [modulename]
-echo.
-echo build [/r] [modulename]
-echo build single module, such as build DxeMain.
-echo If /r is specified, the target will be rebuit after cleaned first.
-echo if no input modulename or modulename is all, then build all
-echo Specail build targets: all, fast, tools.
-echo These special targets may not exist in your tip main makefile.
-echo build - build all tools and modules
-echo build all - build all tools and modules
-echo build fast - build all without FV=NULL modules
-echo build tools - build all tools.
-echo.
-echo build /c [modulename]
-echo build clean [modulename]
-echo remove the temp generated files for single module
-echo if no input modulename, then clean all
-echo Specail clean targets: all, modules, tools.
-echo These special targets may not exist in your tip main makefile.
-echo build /c - clean up all build directories
-echo build /c all - clean up all build directories and binary dirs.
-echo build /c modules - clean up all build directories except for tools.
-echo build /c tools - clean up only tools directory.
-echo.
-echo build /f [/a] [/v] [subname]
-echo find all matched modulename with the sub string of module name.
-echo option /a re-processes dsc files to update module name list.
-echo option /v outputs module name and module.inf file name both.
-echo.
-echo build /h
-echo build /?
-echo display help information.
-echo.
-goto end
-
-:notfind
-echo Warning!!! Your specified module name can't be found.
-echo Try to use /f /a options to update module name list.
-goto end
-
-:finderror
-echo Warning!!! Your specified module name can't be found.
-echo Try to use /f to find modules that you want to build.
-echo Or use /h to get the helpinfo of this script.
-goto end
-
-:builderror
-if exist error.log type error.log
-echo.
-if not exist Tools\ProcessDsc.exe (
- echo.
- echo Error!!! Build tools may not be ready. Try to build tools first.
- echo.
-)
-del module.* > NUL 2>&1
-goto end
-
-:end
-if exist error.log del error.log
-echo on
diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env deleted file mode 100644 index b846afe277..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env +++ /dev/null @@ -1,33 +0,0 @@ -#/*++
-#
-# Copyright (c) 2006 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# Config.env
-#
-# Abstract:
-#
-# This file is used to define platform build configuration.
-# It gets included by PlatformTools.env.
-#
-#--*/
-
-BUILD_TARGET_DIRECTORY = Build
-EFI_DEBUG = NO
-EFI_DEBUG_CLEAR_MEMORY = NO
-EFI_PEI_PERFORMANCE = NO
-EFI_DXE_PERFORMANCE = NO
-EFI_SYMBOLIC_DEBUG = NO
-EFI_GENERATE_INTERMEDIATE_FILE = NO
-UEFI_MODE = YES
-USE_VC8 = NO
-USE_VC8_X64 = NO
-USE_NEWDDK = YES
diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile deleted file mode 100644 index bbb1ad36ca..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile +++ /dev/null @@ -1,147 +0,0 @@ -#/*++
-#
-# Copyright (c) 2006 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-# Makefile
-#
-# Abstract:
-# Makefile for this build tip
-#
-#--*/
-
-#
-# Everything depends on EDK_SOURCE being set.
-#
-!IFNDEF EDK_SOURCE
-!ERROR EDK_SOURCE environmental variable not set
-!ENDIF
-
-!IFNDEF EDK_TOOLS_PATH
-!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used
-!ENDIF
-
-#
-# Set the processor type
-#
-PROCESSOR = IA32
-
-#
-# Define a toolchain so we can pick up the basic defines from
-# the EFI tool setup file.
-#
-TOOLCHAIN = TOOLCHAIN_MSVC
-
-#
-# Include the platform-specific settings file
-#
-!INCLUDE PlatformTools.env
-
-#
-# Default target to create the makefiles and then build the drivers
-#
-all : build_tools makefiles builds
-
-#
-# Make all the build tools by calling the makefile
-#
-build_tools :
- -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)
- -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)
- $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)
- $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt
-
-PROCESSOR=X64
-
-#
-# Run ProcessDsc on our main description files to generate the
-# makefiles and package files. Specify -v option for more verbose output.
-# Specify "-xref filename" to generate a cross-reference file of
-# basename-to-fileguid that can be used by VolInfo.
-#
-makefiles :
- $(PROCESSDSC) \
- -d EFI_SOURCE=$(EDK_SOURCE) \
- -d EDK_SOURCE=$(EDK_SOURCE) \
- -d PROCESSOR=$(PROCESSOR) \
- -d PROJECT_NAME=$(PROJECT_NAME) \
- -d PROJECT_FAMILY=$(PROJECT_FAMILY) \
- -d UEFI_PREFIX=$(UEFI_PREFIX) \
- -d PI_PREFIX=$(PI_PREFIX) \
- -d COMPRESS_METHOD=$(COMPRESS_METHOD) \
- -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \
- -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \
- $(PROJECT_NAME).dsc
-
-#
-# Call all the makefiles that were generated by ProcessDsc. ProcessDsc
-# creates the makefile.out that calls all the component makefiles.
-#
-builds :
- $(MAKE) -f makefile.out libraries
- $(MAKE) -f makefile.out components
-
-#
-# Define a pseudo-target to start building with the libraries or with the
-# components.
-#
-libraries :
- $(MAKE) -f makefile.out libraries
-
-components :
- $(MAKE) -f makefile.out components
-
-#
-# Create a target to clean up all build directories
-#
-clean :
- - @if exist vc??.* del vc??.* > NUL
- - @if exist *.bak del *.bak > NUL
- - @if exist ia32 rd /s/q ia32 > NUL
- - @if exist ipf rd /s /q ipf > NUL
- - @if exist ebc rd /s /q ebc > NUL
- - @if exist x64 rd /s /q x64 > NUL
- - @if exist fv rd /s /q fv > NUL
- - @if exist Tools rd /s /q Tools > NUL
- - @if exist makefile.out del makefile.out > NUL
- - @if exist module.* del module.* > NUL
- - @echo All targets cleaned
-
-#
-# Clean up all build directories except for tools.
-#
-cleanbuilds :
- - @if exist *.bak del *.bak > NUL
- - @if exist ia32 rd /s/q ia32 > NUL
- - @if exist ipf rd /s /q ipf > NUL
- - @if exist ebc rd /s /q ebc > NUL
- - @if exist x64 rd /s /q x64 > NUL
- - @if exist fv rd /s /q fv > NUL
- - @if exist makefile.out del makefile.out > NUL
- - @if exist module.* del module.* > NUL
- - @echo All modules cleaned
-
-#
-# Clean up only the tools
-#
-cleantools :
- - @if exist vc??.* del vc??.* > NUL
- - @if exist Tools rd /s /q Tools > NUL
- - @echo All tools cleaned
-
-#
-# Rebuild target, clean and build all
-#
-rebuild : clean all
-
-#
-# cleanall target to clean all build directories.
-#
-cleanall : clean
diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env deleted file mode 100644 index 79882f3b89..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env +++ /dev/null @@ -1,65 +0,0 @@ -#/*++
-#
-# Copyright (c) 2006, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# PlatformTools.env
-#
-# Abstract:
-# This file is used to define platform specific environment variables.
-# It gets included by every makefile.
-#
-#--*/
-
-!INCLUDE Config.env
-
-#
-# Set the project name
-#
-PROJECT_NAME = X64
-
-#
-# Set the build directory
-#
-BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)
-
-#
-# Define compiler names
-#
-!IFNDEF EDK_TOOLS_PATH
-EFI_ASL_LOCAL = YES
-!ELSE
-EFI_ASSEMBLER_NAME = Masm611
-EFI_COMPILER_X64_NAME = AMD64
-EFI_ASL_LOCAL = NO
-!ENDIF
-
-#
-# These flags are specific to this platform. If a flag is not specific to this
-# platform the flag should be placed in the CommonTools.env file.
-# Processor architecture specific and global macros can be found in
-# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.
-#
-C_PROJ_FLAGS = /O1
-ASM_PROJ_FLAGS =
-LINK_PROJ_FLAGS = /ALIGN:32
-LIB_PROJ_FLAGS =
-EBC_C_PROJ_FLAGS =
-EBC_LINK_PROJ_FLAGS =
-EBC_LIB_PROJ_FLAGS =
-
-#
-# Include processor architecture specific and general Tiano build flags.
-#
-!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env
-
-
-
diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc b/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc deleted file mode 100644 index 2893d8794c..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc +++ /dev/null @@ -1,104 +0,0 @@ -#/*++
-#
-# Copyright (c) 2006 - 2007, Intel Corporation
-# All rights reserved. This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-# Module Name:
-#
-# X64.dsc
-#
-# Abstract:
-#
-# This is the build description file containing the platform
-# build definitions.
-#
-#
-# Notes:
-#
-# The info in this file is broken down into sections. The start of a section
-# is designated by a "[" in the first column. So the [=====] separater ends
-# a section.
-#
-#--*/
-
-
-[=============================================================================]
-#
-# This section gets processed first by the utility. Define any
-# macros that you may use elsewhere in this description file. This is the
-# mechanism by which you can pass parameters and defines to the makefiles
-# generated for each component. You can define it here, and then make an
-# assignment in the [makefile.common] section. For example, if here you
-# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in
-# the [makefile.common] section and it becomes MY_VAR = my_var_value in
-# the output makefiles for each component.
-#
-[Defines]
-PLATFORM = $(PROJECT_NAME)
-
-[=============================================================================]
-#
-# Include other common build descriptions
-#
-!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"
-!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"
-
-[=============================================================================]
-[Fv.Fv.Attributes]
-
-[Fv.Fv.options]
-
-[Build.Fv.Fv]
-
-[=============================================================================]
-#
-# These are the libraries that will be built by the master makefile
-#
-[=============================================================================]
-[Libraries]
-DEFINE EDK_PREFIX=
-
-DEFINE PROCESSOR=IA32
-
-!include "$(EDK_SOURCE)\Sample\Platform\EdkLib32.dsc"
-
-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLib32.dsc"
-
-DEFINE PROCESSOR=X64
-
-!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"
-
-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"
-
-[=============================================================================]
-#
-# These are platform specific libraries that must be built prior to building
-# certain drivers that depend upon them.
-#
-[=============================================================================]
-[Libraries.Platform]
-
-DEFINE PROCESSOR=X64
-
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf
-
-[=============================================================================]
-#
-# These are the components that will be built by the master makefile
-#
-[=============================================================================]
-[Components]
-DEFINE PACKAGE=Default
-
-#Add EDK INF file here:
-#Other\Maintained\Application\Shell\ShellFull.inf
-
-
-[=============================================================================]
\ No newline at end of file diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat deleted file mode 100644 index c224c2ee74..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat +++ /dev/null @@ -1,304 +0,0 @@ -@rem #/*++
-@rem #
-@rem # Copyright (c) 2007, Intel Corporation
-@rem # All rights reserved. This program and the accompanying materials
-@rem # are licensed and made available under the terms and conditions of the BSD License
-@rem # which accompanies this distribution. The full text of the license may be found at
-@rem # http://opensource.org/licenses/bsd-license.php
-@rem #
-@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-@rem #
-@rem # Module Name:
-@rem #
-@rem # build.bat
-@rem #
-@rem # Abstract:
-@rem #
-@rem # This script provides single module build, clean and find function
-@rem # based on module name.
-@rem #
-@rem # The auto-generated module.list file records all module names
-@rem # described in the current platform.dsc.
-@rem #
-@rem #--*/
-
-@echo off
-
-setlocal
-@rem initilize local variable
-set FUNCTION=build
-set MODULE=
-set UPDATE=
-set VERBOSE=
-
-:parse
-if /I "%1"=="/c" (
- set FUNCTION=clean
- shift
- goto parse
-)
-if /I "%1"=="clean" (
- set FUNCTION=clean
- shift
- goto parse
-)
-if /I "%1"=="/r" (
- set FUNCTION=rebuild
- shift
- goto parse
-)
-if /I "%1"=="/h" (
- set FUNCTION=usage
- shift
- goto parse
-)
-if /I "%1"=="/?" (
- set FUNCTION=usage
- shift
- goto parse
-)
-if /I "%1"=="/f" (
- set FUNCTION=find
- shift
- goto parse
-)
-if /I "%1"=="/a" (
- set UPDATE=TRUE
- shift
- goto parse
-)
-if /I "%1"=="/v" (
- set VERBOSE=TRUE
- shift
- goto parse
-)
-if not "%1"=="" (
- set MODULE=%1
- shift
- goto parse
-) else (
- @rem no other paramters
- if "%FUNCTION%"=="rebuild" goto build
- goto %FUNCTION%
-)
-
-:build
-set StartTime=%time%
-@rem if no input, build all
-if "%MODULE%"=="" (
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile clean
- )
- nmake -nologo -f Makefile all
- goto endtime
-)
-@rem then try to build special targets: all, fast, tools.
-if /I "%MODULE%"=="all" (
- @rem build all modules and tools.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile cleanall
- )
- nmake -nologo -f Makefile all
- goto endtime
-)
-if /I "%MODULE%"=="fast" (
- @rem build fast target to skip FV=NULL modules.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile clean
- )
- nmake -nologo -f Makefile fast
- goto endtime
-)
-if /I "%MODULE%"=="tools" (
- @rem build all tools.
- if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f Makefile cleantools
- )
- nmake -nologo -f Makefile build_tools
- echo.
- echo All tools are built.
- goto endtime
-)
-@rem build single module, update build makefiles
-if "%FUNCTION%"=="rebuild" (
- nmake -nologo -f module.mak %MODULE%Clean 2>NUL
-)
-nmake -nologo -f Makefile flashmap > NUL 2>&1
-nmake -nologo -f Makefile makefiles
-if errorlevel 1 goto builderror
-@rem check whether input module name is described in current dsc file.
-findstr /I /C:" %MODULE% " module.list > NUL
-if errorlevel 1 (
- echo.
- echo.
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto finderror
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- echo.
- echo Warning!!! Your specified module name can't be found.
- echo One of the above modules may be what you want to build.
- goto end
-)
-@rem build this module
-nmake -nologo -f module.mak %MODULE%Build
-echo.
-if "%FUNCTION%"=="rebuild" (
- echo Module %MODULE% is rebuilt.
-) else (
- echo Module %MODULE% is built.
-)
-:endtime
-@rem output build time.
-set EndTime=%time%
-echo.
-echo Start time %StartTime%
-echo End time %EndTime%
-goto end
-
-:clean
-@rem if no input, default clean all build directories.
-if "%MODULE%"=="" (
- nmake -nologo -f Makefile clean
- goto end
-)
-@rem first try to clean special tasks: all, modules and tools
-if /I "%MODULE%"=="all" (
- nmake -nologo -f Makefile cleanall
- goto end
-)
-if /I "%MODULE%"=="modules" (
- nmake -nologo -f Makefile cleanbuilds
- goto end
-)
-if /I "%MODULE%"=="tools" (
- nmake -nologo -f Makefile cleantools
- goto end
-)
-@rem clean single module
-@rem check whether input module name is in module.list file.
-if not exist module.list (
- echo Module list info doesn't exist.
- echo Processing dsc file to generate module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-findstr /I /C:" %MODULE% " module.list > NUL
-if errorlevel 1 (
- echo.
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto finderror
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- echo.
- echo Warning!!! Your specified module name can't be found.
- echo One of the above modules may be what you want to clean.
- goto end
-)
-@rem clean this module
-nmake -nologo -f module.mak %MODULE%Clean 2>NUL
-echo.
-echo Module %MODULE% is cleaned.
-goto end
-
-:find
-@rem find match module name by subname.
-if "%UPDATE%"=="TRUE" (
- echo Processing dsc file to update module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-if not exist module.list (
- echo Module list info doesn't exist.
- echo Processing dsc file to generate module list info.
- nmake -nologo -f Makefile flashmap > NUL 2>&1
- nmake -nologo -f Makefile makefiles > error.log 2>&1
- if errorlevel 1 goto builderror
-)
-if "%MODULE%"=="" (
- @rem display all
- echo.
- if "%VERBOSE%"=="TRUE" (
- type module.list
- ) else (
- @rem only output module name without module.inf file name
- for /F %%A in (module.list) do echo %%A
- )
-) else (
- @rem display match module name
- echo.
- if "%VERBOSE%"=="TRUE" (
- findstr /I /C:"%MODULE%" module.list
- if errorlevel 1 goto notfind
- ) else (
- findstr /I /C:"%MODULE%" module.list > NUL
- if errorlevel 1 goto notfind
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A
- )
-)
-goto end
-
-:usage
-echo build or clean single module based on module name after tools are built.
-echo.
-echo build [/r] [/c] [/f] [/h] [modulename]
-echo.
-echo build [/r] [modulename]
-echo build single module, such as build DxeMain.
-echo If /r is specified, the target will be rebuit after cleaned first.
-echo if no input modulename or modulename is all, then build all
-echo Specail build targets: all, fast, tools.
-echo These special targets may not exist in your tip main makefile.
-echo build - build all tools and modules
-echo build all - build all tools and modules
-echo build fast - build all without FV=NULL modules
-echo build tools - build all tools.
-echo.
-echo build /c [modulename]
-echo build clean [modulename]
-echo remove the temp generated files for single module
-echo if no input modulename, then clean all
-echo Specail clean targets: all, modules, tools.
-echo These special targets may not exist in your tip main makefile.
-echo build /c - clean up all build directories
-echo build /c all - clean up all build directories and binary dirs.
-echo build /c modules - clean up all build directories except for tools.
-echo build /c tools - clean up only tools directory.
-echo.
-echo build /f [/a] [/v] [subname]
-echo find all matched modulename with the sub string of module name.
-echo option /a re-processes dsc files to update module name list.
-echo option /v outputs module name and module.inf file name both.
-echo.
-echo build /h
-echo build /?
-echo display help information.
-echo.
-goto end
-
-:notfind
-echo Warning!!! Your specified module name can't be found.
-echo Try to use /f /a options to update module name list.
-goto end
-
-:finderror
-echo Warning!!! Your specified module name can't be found.
-echo Try to use /f to find modules that you want to build.
-echo Or use /h to get the helpinfo of this script.
-goto end
-
-:builderror
-if exist error.log type error.log
-echo.
-if not exist Tools\ProcessDsc.exe (
- echo.
- echo Error!!! Build tools may not be ready. Try to build tools first.
- echo.
-)
-del module.* > NUL 2>&1
-goto end
-
-:end
-if exist error.log del error.log
-echo on
|