diff options
Diffstat (limited to 'EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c')
| -rw-r--r-- | EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c index c1c14052f1..c45238cf8e 100644 --- a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c +++ b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c @@ -1,12 +1,12 @@ /** @file
Copyright (c) 2006 - 2007 Intel Corporation. <BR>
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@par Revision Reference:
This module is modified from DXE\IDE module for Ide Contriller Init support
@@ -89,7 +89,7 @@ IDEBusDriverBindingSupported ( if (EFI_ERROR (Status)) {
return Status;
}
-
+
//
// Close protocol, don't use device path protocol in the .Support() function
//
@@ -140,7 +140,7 @@ IDEBusDriverBindingSupported ( // ***********************************************************************************
//
/**
- Start this driver on Controller by detecting all disks and installing
+ Start this driver on Controller by detecting all disks and installing
BlockIo protocol on them.
@param This Protocol instance pointer.
@@ -210,7 +210,7 @@ IDEBusDriverBindingStart ( if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) {
return Status;
}
-
+
//
// Now open the IDE_CONTROLLER_INIT protocol. Step7.1
//
@@ -429,7 +429,7 @@ IDEBusDriverBindingStart ( if (!(ConfigurationOptions & (1 << (IdeChannel * 2 + IdeDevice)))) {
continue;
}
-
+
//
// The device has been scanned in another Start(), No need to scan it again
// for perf optimization.
@@ -437,7 +437,7 @@ IDEBusDriverBindingStart ( if (IdeBusDriverPrivateData->HaveScannedDevice[IdeChannel * 2 + IdeDevice]) {
continue;
}
-
+
//
// create child handle for the detected device.
//
@@ -664,7 +664,7 @@ IDEBusDriverBindingStart ( if ((IdeBlkIoDevicePtr->Type == IdeHardDisk) || (IdeBlkIoDevicePtr->Type == Ide48bitAddressingHardDisk)) {
Status = SetDriveParameters (IdeBlkIoDevicePtr, &DriveParameters);
}
-
+
//
// Record PIO mode used in private data
//
@@ -715,13 +715,13 @@ IDEBusDriverBindingStart ( (EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_ENABLE),
IdeBlkIoDevicePtr->DevicePath
);
-
+
//
// Create event to clear pending IDE interrupt
//
Status = gBS->CreateEvent (
- EFI_EVENT_SIGNAL_EXIT_BOOT_SERVICES,
- EFI_TPL_NOTIFY,
+ EVT_SIGNAL_EXIT_BOOT_SERVICES,
+ TPL_NOTIFY,
ClearInterrupt,
IdeBlkIoDevicePtr,
&IdeBlkIoDevicePtr->ExitBootServiceEvent
@@ -735,7 +735,7 @@ IDEBusDriverBindingStart ( // end of 2nd outer loop ==========
//
}
-
+
//
// All configurations done! Notify IdeController to do post initialization
// work such as saving IDE controller PCI settings for S3 resume
@@ -808,7 +808,7 @@ ErrorExit: // ***********************************************************************************
//
/**
- Stop this driver on Controller Handle.
+ Stop this driver on Controller Handle.
@param This Protocol instance pointer.
@param DeviceHandle Handle of device to stop driver on
@@ -1003,7 +1003,7 @@ DeRegisterIdeDevice ( );
return Status;
}
-
+
//
// Release allocated resources
//
@@ -1037,7 +1037,7 @@ IDEBlkIoReset ( EFI_STATUS Status;
EFI_TPL OldTpl;
- OldTpl = gBS->RaiseTPL (EFI_TPL_CALLBACK);
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This);
//
@@ -1058,7 +1058,7 @@ IDEBlkIoReset ( Status = EFI_DEVICE_ERROR;
goto Done;
}
-
+
//
// for ATAPI device, using ATAPI reset method
//
@@ -1099,7 +1099,7 @@ IDEBlkIoReadBlocks ( EFI_STATUS Status;
EFI_TPL OldTpl;
- OldTpl = gBS->RaiseTPL (EFI_TPL_CALLBACK);
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This);
@@ -1127,7 +1127,7 @@ IDEBlkIoReadBlocks ( Status = EFI_DEVICE_ERROR;
goto Done;
}
-
+
//
// for ATAPI device, using ATAPI read block's mechanism
//
@@ -1172,8 +1172,8 @@ IDEBlkIoWriteBlocks ( EFI_STATUS Status;
EFI_TPL OldTpl;
- OldTpl = gBS->RaiseTPL (EFI_TPL_CALLBACK);
-
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This);
//
// Requery IDE IO resources in case of the switch of native and legacy modes
@@ -1184,7 +1184,7 @@ IDEBlkIoWriteBlocks ( // for ATA device, using ATA write block's mechanism
//
if (IdeBlkIoDevice->Type == IdeHardDisk ||
- IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {
+ IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {
Status = AtaBlkIoWriteBlocks (
IdeBlkIoDevice,
@@ -1200,7 +1200,7 @@ IDEBlkIoWriteBlocks ( Status = EFI_DEVICE_ERROR;
goto Done;
}
-
+
//
// for ATAPI device, using ATAPI write block's mechanism
//
@@ -1211,7 +1211,7 @@ IDEBlkIoWriteBlocks ( BufferSize,
Buffer
);
-
+
Done:
gBS->RestoreTPL (OldTpl);
return Status;
|