diff options
Diffstat (limited to 'EmbeddedPkg/SerialDxe/SerialIo.c')
| -rw-r--r-- | EmbeddedPkg/SerialDxe/SerialIo.c | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/EmbeddedPkg/SerialDxe/SerialIo.c b/EmbeddedPkg/SerialDxe/SerialIo.c new file mode 100644 index 0000000000..aa9653bcf3 --- /dev/null +++ b/EmbeddedPkg/SerialDxe/SerialIo.c @@ -0,0 +1,258 @@ +/** @file
+ Serial IO Abstraction for GDB stub. This allows an EFI consoles that shows up on the system
+ running GDB. One consle for error information and another console for user input/output.
+
+ Basic packet format is $packet-data#checksum. So every comand has 4 bytes of overhead: $,
+ #, 0, 0. The 0 and 0 are the ascii characters for the checksum.
+
+
+ Copyright (c) 2008-2009, Apple Inc. All rights reserved.
+
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiDxe.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DebugLib.h>
+#include <Library/SerialPortLib.h>
+
+#include <Protocol/SerialIo.h>
+
+/**
+ Reset the serial device.
+
+ @param This Protocol instance pointer.
+
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The serial device could not be reset.
+
+**/
+EFI_STATUS
+EFIAPI
+SerialReset (
+ IN EFI_SERIAL_IO_PROTOCOL *This
+ )
+{
+ SerialPortInitialize ();
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data buts, and stop bits on a serial device.
+
+ @param This Protocol instance pointer.
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the the
+ device's default interface speed.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's dfault FIFO depth.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The serial device could not be reset.
+
+**/
+EFI_STATUS
+EFIAPI
+SerialSetAttributes (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT64 BaudRate,
+ IN UINT32 ReceiveFifoDepth,
+ IN UINT32 Timeout,
+ IN EFI_PARITY_TYPE Parity,
+ IN UINT8 DataBits,
+ IN EFI_STOP_BITS_TYPE StopBits
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ Set the control bits on a serial device
+
+ @param This Protocol instance pointer.
+ @param Control Set the bits of Control that are settable.
+
+ @retval EFI_SUCCESS The new control bits were set on the serial device.
+ @retval EFI_UNSUPPORTED The serial device does not support this operation.
+ @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+EFI_STATUS
+EFIAPI
+SerialSetControl (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT32 Control
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ Retrieves the status of thecontrol bits on a serial device
+
+ @param This Protocol instance pointer.
+ @param Control A pointer to return the current Control signals from the serial device.
+
+ @retval EFI_SUCCESS The control bits were read from the serial device.
+ @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+EFI_STATUS
+EFIAPI
+SerialGetControl (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ OUT UINT32 *Control
+ )
+{
+ if (SerialPortPoll ()) {
+ // If a character is pending don't set EFI_SERIAL_INPUT_BUFFER_EMPTY
+ *Control = EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
+ } else {
+ *Control = EFI_SERIAL_INPUT_BUFFER_EMPTY | EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
+ }
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Writes data to a serial device.
+
+ @param This Protocol instance pointer.
+ @param BufferSize On input, the size of the Buffer. On output, the amount of
+ data actually written.
+ @param Buffer The buffer of data to write
+
+ @retval EFI_SUCCESS The data was written.
+ @retval EFI_DEVICE_ERROR The device reported an error.
+ @retval EFI_TIMEOUT The data write was stopped due to a timeout.
+
+**/
+EFI_STATUS
+EFIAPI
+SerialWrite (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ IN VOID *Buffer
+ )
+{
+ UINTN Count;
+
+ Count = SerialPortWrite (Buffer, *BufferSize);
+ *BufferSize = Count;
+ return (Count == 0) ? EFI_DEVICE_ERROR : EFI_SUCCESS;
+}
+
+/**
+ Writes data to a serial device.
+
+ @param This Protocol instance pointer.
+ @param BufferSize On input, the size of the Buffer. On output, the amount of
+ data returned in Buffer.
+ @param Buffer The buffer to return the data into.
+
+ @retval EFI_SUCCESS The data was read.
+ @retval EFI_DEVICE_ERROR The device reported an error.
+ @retval EFI_TIMEOUT The data write was stopped due to a timeout.
+
+**/
+
+EFI_STATUS
+EFIAPI
+SerialRead (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ UINTN Count;
+
+ Count = SerialPortWrite (Buffer, *BufferSize);
+ *BufferSize = Count;
+ return (Count == 0) ? EFI_DEVICE_ERROR : EFI_SUCCESS;
+}
+
+
+EFI_HANDLE gHandle = NULL;
+
+//
+// Template used to initailize the GDB Serial IO protocols
+//
+EFI_SERIAL_IO_MODE gSerialIoMode = {
+ 0, // ControlMask
+ 0, // Timeout
+ 0, // BaudRate
+ 1, // RceiveFifoDepth
+ 0, // DataBits
+ 0, // Parity
+ 0 // StopBits
+};
+
+
+EFI_SERIAL_IO_PROTOCOL gSerialIoTemplate = {
+ SERIAL_IO_INTERFACE_REVISION,
+ SerialReset,
+ SerialSetAttributes,
+ SerialSetControl,
+ SerialGetControl,
+ SerialWrite,
+ SerialRead,
+ &gSerialIoMode
+};
+
+
+/**
+ Initialize the state information for the Serial Io Protocol
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+EFIAPI
+SerialDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+
+ // Make a new handle with Serial IO protocol and its device path on it.
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &gHandle,
+ &gEfiSerialIoProtocolGuid, &gSerialIoTemplate,
+ &gEfiDevicePathProtocolGuid, NULL, // BugBug: Need a device path
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+
|