summaryrefslogtreecommitdiff
path: root/EmbeddedPkg/TemplateCpuDxe/CpuDxe.c
diff options
context:
space:
mode:
Diffstat (limited to 'EmbeddedPkg/TemplateCpuDxe/CpuDxe.c')
-rw-r--r--EmbeddedPkg/TemplateCpuDxe/CpuDxe.c323
1 files changed, 323 insertions, 0 deletions
diff --git a/EmbeddedPkg/TemplateCpuDxe/CpuDxe.c b/EmbeddedPkg/TemplateCpuDxe/CpuDxe.c
new file mode 100644
index 0000000000..90bf8a9af8
--- /dev/null
+++ b/EmbeddedPkg/TemplateCpuDxe/CpuDxe.c
@@ -0,0 +1,323 @@
+/** @file
+
+ Copyright (c) 2008-2009, Apple Inc. All rights reserved.
+
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "CpuDxe.h"
+
+
+
+/**
+ This function flushes the range of addresses from Start to Start+Length
+ from the processor's data cache. If Start is not aligned to a cache line
+ boundary, then the bytes before Start to the preceding cache line boundary
+ are also flushed. If Start+Length is not aligned to a cache line boundary,
+ then the bytes past Start+Length to the end of the next cache line boundary
+ are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+ supported. If the data cache is fully coherent with all DMA operations, then
+ this function can just return EFI_SUCCESS. If the processor does not support
+ flushing a range of the data cache, then the entire data cache can be flushed.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param Start The beginning physical address to flush from the processor's data
+ cache.
+ @param Length The number of bytes to flush from the processor's data cache. This
+ function may flush more bytes than Length specifies depending upon
+ the granularity of the flush operation that the processor supports.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS The address range from Start to Start+Length was flushed from
+ the processor's data cache.
+ @retval EFI_UNSUPPORTED The processor does not support the cache flush type specified
+ by FlushType.
+ @retval EFI_DEVICE_ERROR The address range from Start to Start+Length could not be flushed
+ from the processor's data cache.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ )
+{
+ return FlushCpuDataCache (Start, Length, FlushType);
+}
+
+
+/**
+ This function enables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are enabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be enabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+{
+ EnableInterrupts ();
+ return EFI_SUCCESS;
+}
+
+
+/**
+ This function disables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are disabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be disabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+/*++
+
+Routine Description:
+ Disables CPU interrupts.
+
+Arguments:
+ This - Protocol instance structure
+
+Returns:
+ EFI_SUCCESS - If interrupts were disabled in the CPU.
+ EFI_DEVICE_ERROR - If interrupts could not be disabled on the CPU.
+
+--*/
+{
+ DisableInterrupts ();
+ return EFI_SUCCESS;
+}
+
+
+/**
+ This function retrieves the processor's current interrupt state a returns it in
+ State. If interrupts are currently enabled, then TRUE is returned. If interrupts
+ are currently disabled, then FALSE is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param State A pointer to the processor's current interrupt state. Set to TRUE if
+ interrupts are enabled and FALSE if interrupts are disabled.
+
+ @retval EFI_SUCCESS The processor's current interrupt state was returned in State.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ )
+{
+ if (State == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *State = GetInterruptState ();
+ return EFI_SUCCESS;
+}
+
+
+/**
+ This function generates an INIT on the processor. If this function succeeds, then the
+ processor will be reset, and control will not be returned to the caller. If InitType is
+ not supported by this processor, or the processor cannot programmatically generate an
+ INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
+ occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InitType The type of processor INIT to perform.
+
+ @retval EFI_SUCCESS The processor INIT was performed. This return code should never be seen.
+ @retval EFI_UNSUPPORTED The processor INIT operation specified by InitType is not supported
+ by this processor.
+ @retval EFI_DEVICE_ERROR The processor INIT failed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ This function registers and enables the handler specified by InterruptHandler for a processor
+ interrupt or exception type specified by InterruptType. If InterruptHandler is NULL, then the
+ handler for the processor interrupt or exception type specified by InterruptType is uninstalled.
+ The installed handler is called once for each processor interrupt or exception.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InterruptType A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_SUCCESS The handler for the processor interrupt was successfully installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler for InterruptType was
+ previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not
+ previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ return RegisterInterruptHandler (InterruptType, InterruptHandler);
+}
+
+
+/**
+ This function reads the processor timer specified by TimerIndex and returns it in TimerValue.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param TimerIndex Specifies which processor timer is to be returned in TimerValue. This parameter
+ must be between 0 and NumberOfTimers-1.
+ @param TimerValue Pointer to the returned timer value.
+ @param TimerPeriod A pointer to the amount of time that passes in femtoseconds for each increment
+ of TimerValue.
+
+ @retval EFI_SUCCESS The processor timer value specified by TimerIndex was returned in TimerValue.
+ @retval EFI_DEVICE_ERROR An error occurred attempting to read one of the processor's timers.
+ @retval EFI_INVALID_PARAMETER TimerValue is NULL or TimerIndex is not valid.
+ @retval EFI_UNSUPPORTED The processor does not have any readable timers.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ )
+{
+ return GetTimerValue (TimerIndex, TimerValue, TimerPeriod);
+}
+
+
+/**
+ This function modifies the attributes for the memory region specified by BaseAddress and
+ Length from their current attributes to the attributes specified by Attributes.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of a memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes The bit mask of attributes to set for the memory region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_ACCESS_DENIED The attributes for the memory resource range specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to modify the attributes of
+ the memory resource range.
+ @retval EFI_UNSUPPORTED The processor does not support one or more bytes of the memory
+ resource range specified by BaseAddress and Length.
+ The bit mask of attributes is not support for the memory resource
+ range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ )
+{
+ //
+ // This is used to set cachability via the MMU on ARM
+ //
+ // This more about optimization and we can usually run fine if the default
+ // settings for cachability are good.
+ //
+ return EFI_UNSUPPORTED;
+}
+
+
+
+
+//
+// Globals used to initialize the protocol
+//
+EFI_HANDLE mCpuHandle = NULL;
+EFI_CPU_ARCH_PROTOCOL mCpu = {
+ CpuFlushCpuDataCache,
+ CpuEnableInterrupt,
+ CpuDisableInterrupt,
+ CpuGetInterruptState,
+ CpuInit,
+ CpuRegisterInterruptHandler,
+ CpuGetTimerValue,
+ CpuSetMemoryAttributes,
+ 0, // NumberOfTimers
+ 4, // DmaBufferAlignment
+};
+
+
+/**
+ Initialize the state information for the CPU Architectural Protocol
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+CpuDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ InitializeExceptions (&mCpu);
+
+ //
+ // Install CPU Architectural Protocol and the thunk protocol
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mCpuHandle,
+ &gEfiCpuArchProtocolGuid, &mCpu,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+