diff options
Diffstat (limited to 'Include/Ppi/SuperIo.h')
-rw-r--r-- | Include/Ppi/SuperIo.h | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/Include/Ppi/SuperIo.h b/Include/Ppi/SuperIo.h new file mode 100644 index 0000000000..1f38199fe3 --- /dev/null +++ b/Include/Ppi/SuperIo.h @@ -0,0 +1,183 @@ +/** @file
+ This PPI provides the super I/O register access functionality.
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This PPI is from PI Version 1.2.1.
+
+**/
+
+#ifndef __EFI_SUPER_IO_PPI_H__
+#define __EFI_SUPER_IO_PPI_H__
+
+#include <Protocol/SuperIo.h>
+
+#define EFI_SIO_PPI_GUID \
+ { \
+ 0x23a464ad, 0xcb83, 0x48b8, {0x94, 0xab, 0x1a, 0x6f, 0xef, 0xcf, 0xe5, 0x22} \
+ }
+
+typedef struct _EFI_SIO_PPI EFI_SIO_PPI;
+typedef struct _EFI_SIO_PPI *PEFI_SIO_PPI;
+
+typedef UINT16 EFI_SIO_REGISTER;
+#define EFI_SIO_REG(ldn,reg) (EFI_SIO_REGISTER) (((ldn) << 8) | reg)
+#define EFI_SIO_LDN_GLOBAL 0xFF
+
+/**
+ Read a Super I/O register.
+
+ The register is specified as an 8-bit logical device number and an 8-bit
+ register value. The logical device numbers for specific SIO devices can be
+ determined using the Info member of the PPI structure.
+
+ @param This A pointer to this instance of the EFI_SIO_PPI.
+ @param ExitCfgMode A boolean specifying whether the driver should turn on
+ configuration mode (FALSE) or turn off configuration mode
+ (TRUE) after completing the read operation. The driver must
+ track the current state of the configuration mode (if any)
+ and turn on configuration mode (if necessary) prior to
+ register access.
+ @param Register A value specifying the logical device number (bits 15:8)
+ and the register to read (bits 7:0). The logical device
+ number of EFI_SIO_LDN_GLOBAL indicates that global
+ registers will be used.
+ @param IoData A pointer to the returned register value.
+
+ @retval EFI_SUCCESS Success.
+ @regval EFI_TIMEOUT The register could not be read in the a reasonable
+ amount of time. The exact time is device-specific.
+ @retval EFI_INVALID_PARAMETERS Register was out of range for this device.
+ @retval EFI_INVALID_PARAMETERS IoData was NULL
+ @retval EFI_DEVICE_ERROR There was a device fault or the device was not present.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PEI_SIO_REGISTER_READ)(
+ IN CONST EFI_SIO_PPI *This,
+ IN BOOLEAN ExitCfgMode,
+ IN EFI_SIO_REGISTER Register,
+ OUT UINT8 *IoData
+ );
+
+/**
+ Write a Super I/O register.
+
+ The register is specified as an 8-bit logical device number and an 8-bit register
+ value. The logical device numbers for specific SIO devices can be determined
+ using the Info member of the PPI structure.
+
+ @param This A pointer to this instance of the EFI_SIO_PPI.
+ @param ExitCfgMode A boolean specifying whether the driver should turn on
+ configuration mode (FALSE) or turn off configuration mode
+ (TRUE) after completing the read operation. The driver must
+ track the current state of the configuration mode (if any)
+ and turn on configuration mode (if necessary) prior to
+ register access.
+ @param Register A value specifying the logical device number (bits 15:8)
+ and the register to read (bits 7:0). The logical device
+ number of EFI_SIO_LDN_GLOBAL indicates that global
+ registers will be used.
+ @param IoData A pointer to the returned register value.
+
+ @retval EFI_SUCCESS Success.
+ @regval EFI_TIMEOUT The register could not be read in the a reasonable
+ amount of time. The exact time is device-specific.
+ @retval EFI_INVALID_PARAMETERS Register was out of range for this device.
+ @retval EFI_INVALID_PARAMETERS IoData was NULL
+ @retval EFI_DEVICE_ERROR There was a device fault or the device was not present.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PEI_SIO_REGISTER_WRITE)(
+ IN CONST EFI_SIO_PPI *This,
+ IN BOOLEAN ExitCfgMode,
+ IN EFI_SIO_REGISTER Register,
+ IN UINT8 IoData
+ );
+
+/**
+ Provides an interface for a table based programming of the Super I/O registers.
+
+ The Modify() function provides an interface for table based programming of the
+ Super I/O registers. This function can be used to perform programming of
+ multiple Super I/O registers with a single function call. For each table entry,
+ the Register is read, its content is bitwise ANDed with AndMask, and then ORed
+ with OrMask before being written back to the Register. The Super I/O driver
+ must track the current state of the Super I/O and enable the configuration mode
+ of Super I/O if necessary prior to table processing. Once the table is processed,
+ the Super I/O device must be returned to the original state.
+
+ @param This A pointer to this instance of the EFI_SIO_PPI.
+ @param Command A pointer to an array of NumberOfCommands EFI_SIO_REGISTER_MODIFY
+ structures. Each structure specifies a single Super I/O register
+ modify operation.
+ @param NumberOfCommands The number of elements in the Command array.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETERS Command is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PEI_SIO_REGISTER_MODIFY)(
+ IN CONST EFI_SIO_PPI *This,
+ IN CONST EFI_SIO_REGISTER_MODIFY *Command,
+ IN UINTN NumberOfCommands
+ );
+
+///
+/// Specifies the end of the information list.
+///
+#define EFI_ACPI_PNP_HID_END 0
+
+typedef UINT32 EFI_ACPI_HID;
+typedef UINT32 EFI_ACPI_UID;
+#pragma pack(1)
+typedef struct _EFI_SIO_INFO {
+ EFI_ACPI_HID Hid;
+ EFI_ACPI_UID Uid;
+ UINT8 Ldn;
+} EFI_SIO_INFO, *PEFI_SIO_INFO;
+#pragma pack()
+
+///
+/// This PPI provides low-level access to Super I/O registers using Read() and
+/// Write(). It also uniquely identifies this Super I/O controller using a GUID
+/// and provides mappings between ACPI style PNP IDs and the logical device numbers.
+/// There is one instance of this PPI per Super I/O device.
+///
+struct _EFI_SIO_PPI {
+ ///
+ /// This function reads a register's value from the Super I/O controller.
+ ///
+ EFI_PEI_SIO_REGISTER_READ Read;
+ ///
+ /// This function writes a value to a register in the Super I/O controller.
+ ///
+ EFI_PEI_SIO_REGISTER_WRITE Write;
+ ///
+ /// This function modifies zero or more registers in the Super I/O controller
+ /// using a table.
+ ///
+ EFI_PEI_SIO_REGISTER_MODIFY Modify;
+ ///
+ /// This GUID uniquely identifies the Super I/O controller.
+ ///
+ EFI_GUID SioGuid;
+ ///
+ /// This pointer is to an array which maps EISA identifiers to logical devices numbers.
+ ///
+ PEFI_SIO_INFO Info;
+};
+
+extern EFI_GUID gEfiSioPpiGuid;
+
+#endif
|