diff options
Diffstat (limited to 'IntelFrameworkModulePkg/Bus')
7 files changed, 583 insertions, 661 deletions
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.c b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.c index a02e3683d3..624f725ab2 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.c +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.c @@ -1,6 +1,7 @@ -/**@file
+/** @file
+ UEFI Component Name(2) protocol implementation for Isa Floppy driver.
-Copyright (c) 2006 - 2007, Intel Corporation.<BR>
+Copyright (c) 2006 - 2009, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -53,10 +54,9 @@ GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mIsaFloppyDriverNameTable by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ @param[in] This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
+ @param[in] Language A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
@@ -64,23 +64,18 @@ GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mIsaFloppyDriverNameTable number of languages supported by a driver is up
to the driver writer. Language is specified
in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
+ @param[out] DriverName A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
-
@retval EFI_SUCCESS The Unicode string for the Driver specified by
This and the language specified by Language was
returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
-
@retval EFI_INVALID_PARAMETER DriverName is NULL.
-
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
-
**/
EFI_STATUS
EFIAPI
@@ -112,15 +107,13 @@ IsaFloppyComponentNameGetDriverName ( then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ @param[in] This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
+ @param[in] ControllerHandle The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to be
returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
+ @param[in] ChildHandle The handle of the child controller to retrieve
the name of. This is an optional parameter that
may be NULL. It will be NULL for device
drivers. It will also be NULL for a bus drivers
@@ -128,8 +121,7 @@ IsaFloppyComponentNameGetDriverName ( controller. It will not be NULL for a bus
driver that wishes to retrieve the name of a
child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
+ @param[in] Language A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
@@ -137,8 +129,7 @@ IsaFloppyComponentNameGetDriverName ( number of languages supported by a driver is up
to the driver writer. Language is specified in
RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
+ @param[out] ControllerName A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle and
ChildHandle in the language specified by
@@ -149,72 +140,55 @@ IsaFloppyComponentNameGetDriverName ( the language specified by Language for the
driver specified by This was returned in
DriverName.
-
@retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
-
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
EFI_HANDLE.
-
@retval EFI_INVALID_PARAMETER Language is NULL.
-
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
@retval EFI_UNSUPPORTED The driver specified by This is not currently
managing the controller specified by
ControllerHandle and ChildHandle.
-
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
-
**/
EFI_STATUS
EFIAPI
IsaFloppyComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
)
{
- EFI_STATUS Status;
- EFI_BLOCK_IO_PROTOCOL *BlkIo;
- FDC_BLK_IO_DEV *FdcDev;
- EFI_ISA_IO_PROTOCOL *IsaIoProtocol;
+ EFI_STATUS Status;
+ EFI_BLOCK_IO_PROTOCOL *BlkIo;
+ FDC_BLK_IO_DEV *FdcDev;
+ if (Language == NULL || ControllerName == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
//
// This is a device driver, so ChildHandle must be NULL.
//
if (ChildHandle != NULL) {
return EFI_UNSUPPORTED;
}
+
//
- // Check Controller's handle
+ // Check if this driver is currently managing ControllerHandle
//
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiIsaIoProtocolGuid,
- (VOID **) &IsaIoProtocol,
- gFdcControllerDriver.DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (!EFI_ERROR (Status)) {
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiIsaIoProtocolGuid,
- gFdcControllerDriver.DriverBindingHandle,
- ControllerHandle
- );
-
- return EFI_UNSUPPORTED;
+ Status = EfiTestManagedDevice (
+ ControllerHandle,
+ gFdcControllerDriver.DriverBindingHandle,
+ &gEfiIsaIoProtocolGuid
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
}
- if (Status != EFI_ALREADY_STARTED) {
- return EFI_UNSUPPORTED;
- }
//
- // Get the Block I/O Protocol on Controller
+ // Get the device context
//
Status = gBS->OpenProtocol (
ControllerHandle,
@@ -227,9 +201,7 @@ IsaFloppyComponentNameGetControllerName ( if (EFI_ERROR (Status)) {
return Status;
}
- //
- // Get the Floppy Disk Controller's Device structure
- //
+
FdcDev = FDD_BLK_IO_FROM_THIS (BlkIo);
return LookupUnicodeString2 (
@@ -244,33 +216,34 @@ IsaFloppyComponentNameGetControllerName ( /**
Add the component name for the floppy device
- @param FdcDev - A pointer to the FDC_BLK_IO_DEV instance.
+ @param[in] FdcDev A pointer to the FDC_BLK_IO_DEV instance.
**/
VOID
AddName (
- IN FDC_BLK_IO_DEV *FdcDev
+ IN FDC_BLK_IO_DEV *FdcDev
)
-
{
- CHAR16 FloppyDriveName[FLOPPY_DRIVE_NAME_ASCII_LEN + 1];
-
- StrCpy (FloppyDriveName, FLOPPY_DRIVE_NAME);
- FloppyDriveName[FLOPPY_DRIVE_NAME_ASCII_LEN - 1] = (CHAR16) (L'0' + FdcDev->Disk);
- AddUnicodeString2 (
- "eng",
- gIsaFloppyComponentName.SupportedLanguages,
- &FdcDev->ControllerNameTable,
- FloppyDriveName,
- TRUE
- );
- AddUnicodeString2 (
- "en",
- gIsaFloppyComponentName2.SupportedLanguages,
- &FdcDev->ControllerNameTable,
- FloppyDriveName,
- FALSE
- );
-
+ CHAR16 FloppyDriveName[FLOPPY_DRIVE_NAME_LEN + 1];
+
+ if (!(FeaturePcdGet(PcdComponentNameDisable) && FeaturePcdGet(PcdComponentName2Disable))) {
+ StrCpy (FloppyDriveName, FLOPPY_DRIVE_NAME);
+ FloppyDriveName[FLOPPY_DRIVE_NAME_LEN - 1] = (CHAR16) (L'0' + FdcDev->Disk);
+
+ AddUnicodeString2 (
+ "eng",
+ gIsaFloppyComponentName.SupportedLanguages,
+ &FdcDev->ControllerNameTable,
+ FloppyDriveName,
+ TRUE
+ );
+ AddUnicodeString2 (
+ "en",
+ gIsaFloppyComponentName2.SupportedLanguages,
+ &FdcDev->ControllerNameTable,
+ FloppyDriveName,
+ FALSE
+ );
+ }
}
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.h b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.h index 2a36821da0..09dc2d29f9 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.h +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/ComponentName.h @@ -1,6 +1,7 @@ -/**@file
+/** @file
+ Header file for implementation of UEFI Component Name(2) protocol.
-Copyright (c) 2006 - 2007, Intel Corporation.<BR>
+Copyright (c) 2006 - 2009, Intel Corporation<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -11,19 +12,15 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/
-#ifndef _ISA_FLOPPY_COMPONENT_NAME_H
-#define _ISA_FLOPPY_COMPONENT_NAME_H
+#ifndef _COMPONENT_NAME_H_
+#define _COMPONENT_NAME_H_
-#define FLOPPY_DRIVE_NAME L"ISA Floppy Drive # "
-#define FLOPPY_DRIVE_NAME_ASCII_LEN (sizeof ("ISA Floppy Drive # ") - 1)
-#define ADD_FLOPPY_NAME(x) AddName ((x))
+#define FLOPPY_DRIVE_NAME L"ISA Floppy Drive # "
+#define FLOPPY_DRIVE_NAME_LEN ((sizeof (FLOPPY_DRIVE_NAME) / sizeof (CHAR16)) - 1)
extern EFI_COMPONENT_NAME_PROTOCOL gIsaFloppyComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gIsaFloppyComponentName2;
-//
-// EFI Component Name Functions
-//
/**
Retrieves a Unicode string that is the user readable name of the driver.
@@ -34,10 +31,9 @@ extern EFI_COMPONENT_NAME2_PROTOCOL gIsaFloppyComponentName2; by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ @param[in] This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
+ @param[in] Language A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
@@ -45,23 +41,18 @@ extern EFI_COMPONENT_NAME2_PROTOCOL gIsaFloppyComponentName2; number of languages supported by a driver is up
to the driver writer. Language is specified
in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
+ @param[out] DriverName A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
-
@retval EFI_SUCCESS The Unicode string for the Driver specified by
This and the language specified by Language was
returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
-
@retval EFI_INVALID_PARAMETER DriverName is NULL.
-
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
-
**/
EFI_STATUS
EFIAPI
@@ -85,15 +76,13 @@ IsaFloppyComponentNameGetDriverName ( then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ @param[in] This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
+ @param[in] ControllerHandle The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to be
returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
+ @param[in] ChildHandle The handle of the child controller to retrieve
the name of. This is an optional parameter that
may be NULL. It will be NULL for device
drivers. It will also be NULL for a bus drivers
@@ -101,8 +90,7 @@ IsaFloppyComponentNameGetDriverName ( controller. It will not be NULL for a bus
driver that wishes to retrieve the name of a
child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
+ @param[in] Language A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
@@ -110,8 +98,7 @@ IsaFloppyComponentNameGetDriverName ( number of languages supported by a driver is up
to the driver writer. Language is specified in
RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
+ @param[out] ControllerName A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle and
ChildHandle in the language specified by
@@ -122,54 +109,38 @@ IsaFloppyComponentNameGetDriverName ( the language specified by Language for the
driver specified by This was returned in
DriverName.
-
@retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
-
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
EFI_HANDLE.
-
@retval EFI_INVALID_PARAMETER Language is NULL.
-
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
@retval EFI_UNSUPPORTED The driver specified by This is not currently
managing the controller specified by
ControllerHandle and ChildHandle.
-
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
-
**/
EFI_STATUS
EFIAPI
IsaFloppyComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
);
-VOID
-AddName (
- IN FDC_BLK_IO_DEV *FdcDev
- )
/**
+ Add the component name for the floppy device
-Routine Description:
-
- GC_TODO: Add function description
-
-Arguments:
-
- FdcDev - GC_TODO: add argument description
-
-Returns:
-
- GC_TODO: add return values
+ @param[in] FdcDev A pointer to the FDC_BLK_IO_DEV instance.
**/
-;
+VOID
+AddName (
+ IN FDC_BLK_IO_DEV *FdcDev
+ );
#endif
+
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.c b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.c index e819a1d132..fdc83d383b 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.c +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.c @@ -1,15 +1,14 @@ -/**@file
- ISA Floppy Driver
+/** @file
+ ISA Floppy Disk UEFI Driver conforming to the UEFI driver model
+
1. Support two types diskette drive
1.44M drive and 2.88M drive (and now only support 1.44M)
- 2. Support two diskette drives
+ 2. Support two diskette drives per floppy disk controller
3. Use DMA channel 2 to transfer data
4. Do not use interrupt
5. Support diskette change line signal and write protect
- conforming to EFI driver model
-
-Copyright (c) 2006 - 2007, Intel Corporation.<BR>
+Copyright (c) 2006 - 2009, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -22,7 +21,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "IsaFloppy.h"
-LIST_ENTRY gControllerHead = INITIALIZE_LIST_HEAD_VARIABLE(gControllerHead);
+LIST_ENTRY mControllerHead = INITIALIZE_LIST_HEAD_VARIABLE (mControllerHead);
//
// ISA Floppy Driver Binding Protocol
@@ -38,14 +37,13 @@ EFI_DRIVER_BINDING_PROTOCOL gFdcControllerDriver = { /**
- The user Entry Point for module IsaFloppy. The user code starts with this function.
+ The main Entry Point for this driver.
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
- @param[in] SystemTable A pointer to the EFI System Table.
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
- @retval EFI_SUCCESS The entry point is executed successfully.
- @retval other Some error occurs when executing this entry point.
-
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
**/
EFI_STATUS
EFIAPI
@@ -54,7 +52,7 @@ InitializeIsaFloppy( IN EFI_SYSTEM_TABLE *SystemTable
)
{
- EFI_STATUS Status;
+ EFI_STATUS Status;
//
// Install driver model protocol(s).
@@ -69,19 +67,21 @@ InitializeIsaFloppy( );
ASSERT_EFI_ERROR (Status);
-
return Status;
}
/**
- Test controller is a Floppy Disk Controller
+ Test if the controller is a floppy disk drive device
- @param This Pointer of EFI_DRIVER_BINDING_PROTOCOL
- @param Controller driver's controller
- @param RemainingDevicePath children device path
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] Controller The handle of the controller to test.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
- @retval EFI_UNSUPPORTED controller is not floppy disk
- @retval EFI_SUCCESS controller is floppy disk
+ @retval EFI_SUCCESS The device is supported by this driver.
+ @retval EFI_ALREADY_STARTED The device is already being managed by this driver.
+ @retval EFI_ACCESS_DENIED The device is already being managed by a different driver
+ or an application that requires exclusive access.
+ @retval EFI_UNSUPPORTED The device is is not supported by this driver.
**/
EFI_STATUS
EFIAPI
@@ -91,8 +91,35 @@ FdcControllerDriverSupported ( IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
- EFI_STATUS Status;
- EFI_ISA_IO_PROTOCOL *IsaIo;
+ EFI_STATUS Status;
+ EFI_ISA_IO_PROTOCOL *IsaIo;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+
+ //
+ // Ignore the parameter RemainingDevicePath because this is a device driver.
+ //
+
+ //
+ // Open the device path protocol
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &ParentDevicePath,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
//
// Open the ISA I/O Protocol
@@ -109,7 +136,7 @@ FdcControllerDriverSupported ( return Status;
}
//
- // Use the ISA I/O Protocol to see if Controller is a Floppy Disk Controller
+ // Use the ISA I/O Protocol to see if Controller is a floppy disk drive device
//
Status = EFI_SUCCESS;
if (IsaIo->ResourceList->Device.HID != EISA_PNP_ID (0x604)) {
@@ -129,13 +156,20 @@ FdcControllerDriverSupported ( }
/**
- Create floppy control instance on controller.
-
- @param This Pointer of EFI_DRIVER_BINDING_PROTOCOL
- @param Controller driver controller handle
- @param RemainingDevicePath Children's device path
-
- @retval whether success to create floppy control instance.
+ Start this driver on Controller.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
+ This parameter is ignored by device drivers, and is optional for bus drivers.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.
+ Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
@@ -145,13 +179,13 @@ FdcControllerDriverStart ( IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
- EFI_STATUS Status;
- FDC_BLK_IO_DEV *FdcDev;
- EFI_ISA_IO_PROTOCOL *IsaIo;
- UINTN Index;
- LIST_ENTRY *List;
- BOOLEAN Found;
- EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ EFI_STATUS Status;
+ FDC_BLK_IO_DEV *FdcDev;
+ EFI_ISA_IO_PROTOCOL *IsaIo;
+ UINTN Index;
+ LIST_ENTRY *List;
+ BOOLEAN Found;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
FdcDev = NULL;
IsaIo = NULL;
@@ -194,14 +228,14 @@ FdcControllerDriverStart ( goto Done;
}
//
- // Allocate the Floppy Disk Controller's Device structure
+ // Allocate the floppy device's Device structure
//
FdcDev = AllocateZeroPool (sizeof (FDC_BLK_IO_DEV));
if (FdcDev == NULL) {
goto Done;
}
//
- // Initialize the Floppy Disk Controller's Device structure
+ // Initialize the floppy device's device structure
//
FdcDev->Signature = FDC_BLK_IO_DEV_SIGNATURE;
FdcDev->Handle = Controller;
@@ -212,10 +246,11 @@ FdcControllerDriverStart ( FdcDev->ControllerState = NULL;
FdcDev->DevicePath = ParentDevicePath;
- ADD_FLOPPY_NAME (FdcDev);
+ FdcDev->ControllerNameTable = NULL;
+ AddName (FdcDev);
//
- // Look up the base address of the Floppy Disk Controller
+ // Look up the base address of the Floppy Disk Controller which controls this floppy device
//
for (Index = 0; FdcDev->IsaIo->ResourceList->ResourceItem[Index].Type != EfiIsaAcpiResourceEndOfList; Index++) {
if (FdcDev->IsaIo->ResourceList->ResourceItem[Index].Type == EfiIsaAcpiResourceIo) {
@@ -223,11 +258,11 @@ FdcControllerDriverStart ( }
}
//
- // Maintain the list of controller list
+ // Maintain the list of floppy disk controllers
//
Found = FALSE;
- List = gControllerHead.ForwardLink;
- while (List != &gControllerHead) {
+ List = mControllerHead.ForwardLink;
+ while (List != &mControllerHead) {
FdcDev->ControllerState = FLOPPY_CONTROLLER_FROM_LIST_ENTRY (List);
if (FdcDev->BaseAddress == FdcDev->ControllerState->BaseAddress) {
Found = TRUE;
@@ -239,7 +274,7 @@ FdcControllerDriverStart ( if (!Found) {
//
- // The Controller is new
+ // A new floppy disk controller controlling this floppy disk drive is found
//
FdcDev->ControllerState = AllocatePool (sizeof (FLOPPY_CONTROLLER_CONTEXT));
if (FdcDev->ControllerState == NULL) {
@@ -252,10 +287,10 @@ FdcControllerDriverStart ( FdcDev->ControllerState->BaseAddress = FdcDev->BaseAddress;
FdcDev->ControllerState->NumberOfDrive = 0;
- InsertTailList (&gControllerHead, &FdcDev->ControllerState->Link);
+ InsertTailList (&mControllerHead, &FdcDev->ControllerState->Link);
}
//
- // Create a timer event for each Floppd Disk Controller.
+ // Create a timer event for each floppy disk drive device.
// This timer event is used to control the motor on and off
//
Status = gBS->CreateEvent (
@@ -304,8 +339,9 @@ FdcControllerDriverStart ( &FdcDev->BlkIo,
NULL
);
-
- FdcDev->ControllerState->NumberOfDrive++;
+ if (!EFI_ERROR (Status)) {
+ FdcDev->ControllerState->NumberOfDrive++;
+ }
Done:
if (EFI_ERROR (Status)) {
@@ -317,14 +353,19 @@ Done: );
//
- // Close the device path protocol
+ // If a floppy drive device structure was allocated, then free it
//
- gBS->CloseProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
+ if (FdcDev != NULL) {
+ if (FdcDev->Event != NULL) {
+ //
+ // Close the event for turning the motor off
+ //
+ gBS->CloseEvent (FdcDev->Event);
+ }
+
+ FreeUnicodeStringTable (FdcDev->ControllerNameTable);
+ FreePool (FdcDev);
+ }
//
// Close the ISA I/O Protocol
@@ -337,38 +378,34 @@ Done: Controller
);
}
+
//
- // If a Floppy Disk Controller Device structure was allocated, then free it
+ // Close the device path protocol
//
- if (FdcDev != NULL) {
- if (FdcDev->Event != NULL) {
- //
- // Close the event for turning the motor off
- //
- gBS->CloseEvent (FdcDev->Event);
- }
-
- FreeUnicodeStringTable (FdcDev->ControllerNameTable);
- gBS->FreePool (FdcDev);
- }
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
}
return Status;
}
/**
- Stop this driver on ControllerHandle. Support stoping any child handles
- created by this driver.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
- children is zero stop the entire bus driver.
- @param ChildHandleBuffer List of Child Handles to Stop.
-
- @retval EFI_SUCCESS This driver is removed ControllerHandle
- @retval other This driver was not removed from this device
-
+ Stop this driver on ControllerHandle.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
@@ -384,6 +421,10 @@ FdcControllerDriverStop ( FDC_BLK_IO_DEV *FdcDev;
//
+ // Ignore NumberOfChildren since this is a device driver
+ //
+
+ //
// Get the Block I/O Protocol on Controller
//
Status = gBS->OpenProtocol (
@@ -398,7 +439,7 @@ FdcControllerDriverStop ( return Status;
}
//
- // Get the Floppy Disk Controller's Device structure
+ // Get the floppy drive device's Device structure
//
FdcDev = FDD_BLK_IO_FROM_THIS (BlkIo);
@@ -412,11 +453,6 @@ FdcControllerDriverStop ( );
//
- // Turn the motor off on the Floppy Disk Controller
- //
- FddTimerProc (FdcDev->Event, FdcDev);
-
- //
// Uninstall the Block I/O Protocol
//
Status = gBS->UninstallProtocolInterface (
@@ -427,6 +463,17 @@ FdcControllerDriverStop ( if (EFI_ERROR (Status)) {
return Status;
}
+
+ //
+ // Close the event for turning the motor off
+ //
+ gBS->CloseEvent (FdcDev->Event);
+
+ //
+ // Turn the motor off on the floppy drive device
+ //
+ FddTimerProc (FdcDev->Event, FdcDev);
+
//
// Close the device path protocol
//
@@ -453,20 +500,15 @@ FdcControllerDriverStop ( FdcDev->ControllerState->NumberOfDrive--;
//
- // Close the event for turning the motor off
- //
- gBS->CloseEvent (FdcDev->Event);
-
- //
// Free the cache if one was allocated
//
FdcFreeCache (FdcDev);
//
- // Free the Floppy Disk Controller's Device structure
+ // Free the floppy drive device's device structure
//
FreeUnicodeStringTable (FdcDev->ControllerNameTable);
- gBS->FreePool (FdcDev);
+ FreePool (FdcDev);
return EFI_SUCCESS;
}
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.h b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.h index e518d4774d..13e03e221d 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.h +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.h @@ -1,8 +1,7 @@ -/**@file
- Include for ISA Floppy Driver
- Define the data structure and so on
+/** @file
+ Include file for ISA Floppy Driver
-Copyright (c) 2006 - 2007, Intel Corporation.<BR>
+Copyright (c) 2006 - 2009, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -13,15 +12,15 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/
-#ifndef _ISA_FLOPPY_H
-#define _ISA_FLOPPY_H
+#ifndef _ISA_FLOPPY_H_
+#define _ISA_FLOPPY_H_
-#include <PiDxe.h>
-#include <FrameworkPei.h>
+#include <Uefi.h>
#include <Protocol/BlockIo.h>
#include <Protocol/IsaIo.h>
#include <Protocol/DevicePath.h>
+#include <Guid/StatusCodeDataTypeId.h>
#include <Library/TimerLib.h>
#include <Library/DebugLib.h>
@@ -32,16 +31,10 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/ReportStatusCodeLib.h>
-//
-// Driver Binding Externs
-//
+#include <Library/PcdLib.h>
+
extern EFI_DRIVER_BINDING_PROTOCOL gFdcControllerDriver;
-extern EFI_COMPONENT_NAME_PROTOCOL gIsaFloppyComponentName;
-extern EFI_COMPONENT_NAME2_PROTOCOL gIsaFloppyComponentName2;
-//
-// define some value
-//
#define STALL_1_SECOND 1000000
#define STALL_1_MSECOND 1000
@@ -57,14 +50,14 @@ extern EFI_COMPONENT_NAME2_PROTOCOL gIsaFloppyComponentName2; #define FLOPPY_CONTROLLER_CONTEXT_SIGNATURE SIGNATURE_32 ('F', 'D', 'C', 'C')
typedef enum {
- FDC_DISK0 = 0,
- FDC_DISK1 = 1,
- FDC_MAX_DISK= 2
+ FdcDisk0 = 0,
+ FdcDisk1 = 1,
+ FdcMaxDisk = 2
} EFI_FDC_DISK;
typedef struct {
UINT32 Signature;
- LIST_ENTRY Link;
+ LIST_ENTRY Link;
BOOLEAN FddResetPerformed;
EFI_STATUS FddResetStatus;
BOOLEAN NeedRecalibrate;
@@ -97,11 +90,11 @@ typedef struct { #define FDD_BLK_IO_FROM_THIS(a) CR (a, FDC_BLK_IO_DEV, BlkIo, FDC_BLK_IO_DEV_SIGNATURE)
#define FLOPPY_CONTROLLER_FROM_LIST_ENTRY(a) \
- CR (a, \
- FLOPPY_CONTROLLER_CONTEXT, \
- Link, \
- FLOPPY_CONTROLLER_CONTEXT_SIGNATURE \
- )
+ CR (a, \
+ FLOPPY_CONTROLLER_CONTEXT, \
+ Link, \
+ FLOPPY_CONTROLLER_CONTEXT_SIGNATURE \
+ )
#define DISK_1440K_EOT 0x12
#define DISK_1440K_GPL 0x1b
@@ -154,9 +147,9 @@ typedef struct { UINT8 Status0;
UINT8 Status1;
UINT8 Status2;
- UINT8 C;
- UINT8 H;
- UINT8 S;
+ UINT8 Cylinder;
+ UINT8 Head;
+ UINT8 Sector;
UINT8 Number;
} FDD_RESULT_PACKET;
@@ -164,32 +157,31 @@ typedef struct { // FDC Registers
//
//
-// 0x3F2 Digital Output Register
+// Digital Output Register address offset
//
#define FDC_REGISTER_DOR 2
//
-// 0x3F4 Main Status Register
+// Main Status Register address offset
//
#define FDC_REGISTER_MSR 4
//
-// 0x3F5 Data Register
+// Data Register address offset
//
#define FDC_REGISTER_DTR 5
//
-// 0x3F7 Configuration Control Register(data rate select)
+// Configuration Control Register(data rate select) address offset
//
#define FDC_REGISTER_CCR 7
//
-// 0x3F7 Digital Input Register(diskchange)
+// Digital Input Register(diskchange) address offset
//
#define FDC_REGISTER_DIR 7
-
//
// FDC Register Bit Definitions
//
@@ -485,22 +477,20 @@ typedef struct { #define IC_ATRC 0xC0
//
-// Global Variables
-//
-extern EFI_DRIVER_BINDING_PROTOCOL gFdcControllerDriver;
-
-//
// EFI Driver Binding Protocol Functions
//
+
/**
- Test controller is a Floppy Disk Controller
+ Test controller is a floppy disk drive device
- @param This Pointer of EFI_DRIVER_BINDING_PROTOCOL
- @param Controller driver's controller
- @param RemainingDevicePath children device path
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] Controller The handle of the controller to test.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
- @retval EFI_UNSUPPORTED controller is not floppy disk
- @retval EFI_SUCCESS controller is floppy disk
+ @retval EFI_SUCCESS The device is supported by this driver.
+ @retval EFI_ALREADY_STARTED The device is already being managed by this driver.
+ @retval EFI_ACCESS_DENIED The device is already being managed by a different driver
+ or an application that requires exclusive access.
**/
EFI_STATUS
EFIAPI
@@ -511,13 +501,20 @@ FdcControllerDriverSupported ( );
/**
- Create floppy control instance on controller.
-
- @param This Pointer of EFI_DRIVER_BINDING_PROTOCOL
- @param Controller driver controller handle
- @param RemainingDevicePath Children's device path
-
- @retval whether success to create floppy control instance.
+ Start this driver on Controller.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path.
+ This parameter is ignored by device drivers, and is optional for bus drivers.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.
+ Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
@@ -528,18 +525,18 @@ FdcControllerDriverStart ( );
/**
- Stop this driver on ControllerHandle. Support stoping any child handles
- created by this driver.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
- children is zero stop the entire bus driver.
- @param ChildHandleBuffer List of Child Handles to Stop.
-
- @retval EFI_SUCCESS This driver is removed ControllerHandle
- @retval other This driver was not removed from this device
-
+ Stop this driver on ControllerHandle.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
@@ -553,8 +550,9 @@ FdcControllerDriverStop ( //
// EFI Block I/O Protocol Functions
//
+
/**
- Reset the Floppy Logic Drive, call the FddReset function
+ Reset the Floppy Logic Drive, call the FddReset function.
@param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
@param ExtendedVerification BOOLEAN: Indicate that the driver may perform a more
@@ -573,7 +571,7 @@ FdcReset ( );
/**
- Flush block via fdd controller
+ Flush block via fdd controller.
@param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
@return EFI_SUCCESS
@@ -586,11 +584,11 @@ FddFlushBlocks ( );
/**
- Read the requested number of blocks from the device
+ Read the requested number of blocks from the device.
@param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
@param MediaId UINT32: The media id that the read request is for
- @param LBA EFI_LBA: The starting logic block address to read from on the device
+ @param Lba EFI_LBA: The starting logic block address to read from on the device
@param BufferSize UINTN: The size of the Buffer in bytes
@param Buffer VOID *: A pointer to the destination buffer for the data
@@ -610,17 +608,17 @@ EFIAPI FddReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
- Write a specified number of blocks to the device
+ Write a specified number of blocks to the device.
@param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
@param MediaId UINT32: The media id that the write request is for
- @param LBA EFI_LBA: The starting logic block address to be written
+ @param Lba EFI_LBA: The starting logic block address to be written
@param BufferSize UINTN: The size in bytes in Buffer
@param Buffer VOID *: A pointer to the source buffer for the data
@@ -640,7 +638,7 @@ EFIAPI FddWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
);
@@ -650,7 +648,7 @@ FddWriteBlocks ( //
/**
- Detect the floppy drive is presented or not
+ Detect the floppy drive is presented or not.
@param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
@retval EFI_SUCCESS Drive is presented
@@ -664,8 +662,8 @@ DiscoverFddDevice ( /**
- Do recalibrate and see the drive is presented or not
- Set the media parameters
+ Do recalibrate and see the drive is presented or not.
+ Set the media parameters.
@param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
@return the drive is presented or not
@@ -678,7 +676,7 @@ FddIdentify ( /**
- Reset the Floppy Logic Drive
+ Reset the Floppy Logic Drive.
@param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
@@ -694,8 +692,8 @@ FddReset ( /**
- Turn the drive's motor on
- The drive's motor must be on before any command can be executed
+ Turn the drive's motor on.
+ The drive's motor must be on before any command can be executed.
@param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
@@ -711,7 +709,7 @@ MotorOn ( /**
- Set a Timer and when Timer goes off, turn the motor off
+ Set a Timer and when Timer goes off, turn the motor off.
@param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
@@ -726,7 +724,7 @@ MotorOff ( );
/**
- Detect the disk in the drive is changed or not
+ Detect the disk in the drive is changed or not.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@@ -744,7 +742,7 @@ DisketChanged ( /**
Do the Specify command, this command sets DMA operation
and the initial values for each of the three internal
- times: HUT, SRT and HLT
+ times: HUT, SRT and HLT.
@param FdcDev Pointer to instance of FDC_BLK_IO_DEV
@@ -758,7 +756,7 @@ Specify ( );
/**
- Set the head of floppy drive to track 0
+ Set the head of floppy drive to track 0.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@retval EFI_SUCCESS: Execute the Recalibrate operation successfully
@@ -771,7 +769,7 @@ Recalibrate ( );
/**
- Set the head of floppy drive to the new cylinder
+ Set the head of floppy drive to the new cylinder.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@param Lba EFI_LBA : The logic block address want to seek
@@ -787,8 +785,7 @@ Seek ( );
/**
- Do the Sense Interrupt Status command, this command
- resets the interrupt signal
+ Do the Sense Interrupt Status command, this command resets the interrupt signal.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@param StatusRegister0 UINT8 *: Be used to save Status Register 0 read from FDC
@@ -807,7 +804,7 @@ SenseIntStatus ( );
/**
- Do the Sense Drive Status command
+ Do the Sense Drive Status command.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@param Lba EFI_LBA : Logic block address
@@ -824,8 +821,7 @@ SenseDrvStatus ( );
/**
- Update the disk media properties and if necessary
- reinstall Block I/O interface
+ Update the disk media properties and if necessary reinstall Block I/O interface.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@@ -839,7 +835,7 @@ DetectMedia ( );
/**
- Set the data rate and so on
+ Set the data rate and so on.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@@ -851,7 +847,7 @@ Setup ( );
/**
- Read or Write a number of blocks in the same cylinder
+ Read or Write a number of blocks in the same cylinder.
@param FdcDev A pointer to Data Structure FDC_BLK_IO_DEV
@param HostAddress device address
@@ -872,7 +868,7 @@ ReadWriteDataSector ( );
/**
- Fill in FDD command's parameter
+ Fill in FDD command's parameter.
@param FdcDev Pointer to instance of FDC_BLK_IO_DEV
@param Lba The starting logic block address to read from on the device
@@ -887,24 +883,23 @@ FillPara ( );
/**
- Read result byte from Data Register of FDC
-
- @param FdcDev Pointer to instance of FDC_BLK_IO_DEV
- @param Pointer UINT8 *: Be used to save result byte read from FDC
+ Read result byte from Data Register of FDC.
+ @param FdcDev Pointer to instance of FDC_BLK_IO_DEV
+ @param Pointer Buffer to store the byte read from FDC
- @retval EFI_SUCCESS: Read result byte from FDC successfully
- @retval EFI_DEVICE_ERROR: The FDC is not ready to be read
+ @retval EFI_SUCCESS Read result byte from FDC successfully
+ @retval EFI_DEVICE_ERROR The FDC is not ready to be read
**/
EFI_STATUS
DataInByte (
- IN FDC_BLK_IO_DEV *FdcDev,
- IN UINT8 *Pointer
+ IN FDC_BLK_IO_DEV *FdcDev,
+ OUT UINT8 *Pointer
);
/**
- Write command byte to Data Register of FDC
+ Write command byte to Data Register of FDC.
@param FdcDev Pointer to instance of FDC_BLK_IO_DEV
@param Pointer Be used to save command byte written to FDC
@@ -920,8 +915,7 @@ DataOutByte ( );
/**
- Detect the specified floppy logic drive is busy or
- not within a period of time
+ Detect the specified floppy logic drive is busy or not within a period of time.
@param FdcDev Indicate it is drive A or drive B
@param TimeoutInSeconds the time period for waiting
@@ -938,8 +932,7 @@ FddWaitForBSYClear ( );
/**
-
- Routine Description: Determine whether FDC is ready to write or read
+ Determine whether FDC is ready to write or read.
@param FdcDev Pointer to instance of FDC_BLK_IO_DEV
@param Dio BOOLEAN: Indicate the FDC is waiting to write or read
@@ -957,8 +950,7 @@ FddDRQReady ( );
/**
- Set FDC control structure's attribute according to
- result
+ Set FDC control structure's attribute according to result.
@param Result Point to result structure
@param FdcDev FDC control structure
@@ -976,7 +968,7 @@ CheckResult ( );
/**
- Check the drive status information
+ Check the drive status information.
@param StatusRegister3 the value of Status Register 3
@@ -990,26 +982,25 @@ CheckStatus3 ( );
/**
- Calculate the number of block in the same cylinder
- according to LBA
+ Calculate the number of block in the same cylinder according to Lba.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
- @param LBA EFI_LBA: The starting logic block address
+ @param Lba EFI_LBA: The starting logic block address
@param NumberOfBlocks UINTN: The number of blocks
@return The number of blocks in the same cylinder which the starting
- logic block address is LBA
+ logic block address is Lba
**/
UINTN
GetTransferBlockCount (
IN FDC_BLK_IO_DEV *FdcDev,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN NumberOfBlocks
);
/**
- When the Timer(2s) off, turn the drive's motor off
+ When the Timer(2s) off, turn the drive's motor off.
@param Event EFI_EVENT: Event(the timer) whose notification function is being
invoked
@@ -1024,7 +1015,7 @@ FddTimerProc ( );
/**
- Read I/O port for FDC
+ Read I/O port for FDC.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@param Offset The offset address of port
@@ -1037,7 +1028,7 @@ FdcReadPort ( );
/**
- Write I/O port for FDC
+ Write I/O port for FDC.
@param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
@param Offset The offset address of port
@@ -1052,11 +1043,11 @@ FdcWritePort ( );
/**
- Read or Write a number of blocks to floppy device
+ Read or Write a number of blocks to floppy device.
@param This Pointer to instance of EFI_BLOCK_IO_PROTOCOL
@param MediaId The media id of read/write request
- @param LBA The starting logic block address to read from on the device
+ @param Lba The starting logic block address to read from on the device
@param BufferSize The size of the Buffer in bytes
@param Operation - GC_TODO: add argument description
@param Buffer - GC_TODO: add argument description
@@ -1081,14 +1072,14 @@ EFI_STATUS FddReadWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
IN BOOLEAN Operation,
OUT VOID *Buffer
);
/**
- Common interface for free cache
+ Common interface for free cache.
@param FdcDev Pointer of FDC_BLK_IO_DEV instance
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c index 5f4a990357..b823034bc5 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c @@ -1,15 +1,7 @@ -/**@file
- ISA Floppy Driver
- 1. Support two types diskette drive
- 1.44M drive and 2.88M drive (and now only support 1.44M)
- 2. Support two diskette drives
- 3. Use DMA channel 2 to transfer data
- 4. Do not use interrupt
- 5. Support diskette change line signal and write protect
+/** @file
+ Implementation of the EFI Block IO Protocol for ISA Floppy driver
- Implement the Block IO interface
-
-Copyright (c) 2006 - 2007, Intel Corporation.<BR>
+Copyright (c) 2006 - 2009, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -20,20 +12,17 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/
-
#include "IsaFloppy.h"
/**
- Reset the Floppy Logic Drive, call the FddReset function
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @param ExtendedVerification BOOLEAN: Indicate that the driver may perform a more
- exhaustive verification operation of the device during
- reset, now this par is ignored in this driver
- @retval EFI_SUCCESS: The Floppy Logic Drive is reset
- @retval EFI_DEVICE_ERROR: The Floppy Logic Drive is not functioning correctly
- and can not be reset
+ Reset the Block Device.
+
+ @param This Indicates a pointer to the calling context.
+ @param ExtendedVerification Driver may perform diagnostics on reset.
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The device is not functioning properly and could
+ not be reset.
**/
EFI_STATUS
EFIAPI
@@ -59,10 +48,13 @@ FdcReset ( }
/**
- Flush block via fdd controller
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @return EFI_SUCCESS
+ Flush the Block Device.
+
+ @param This Indicates a pointer to the calling context.
+
+ @retval EFI_SUCCESS All outstanding data was written to the device
+ @retval EFI_DEVICE_ERROR The device reported an error while writting back the data
+ @retval EFI_NO_MEDIA There is no media in the device.
**/
EFI_STATUS
@@ -78,10 +70,10 @@ FddFlushBlocks ( }
/**
- Common report status code interface
+ Common report status code interface.
@param This Pointer of FDC_BLK_IO_DEV instance
- @param Read Error type: read or write?
+ @param Read Read or write operation when error occurrs
**/
VOID
FddReportStatus (
@@ -101,23 +93,22 @@ FddReportStatus ( }
/**
- Read the requested number of blocks from the device
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @param MediaId UINT32: The media id that the read request is for
- @param LBA EFI_LBA: The starting logic block address to read from on the device
- @param BufferSize UINTN: The size of the Buffer in bytes
- @param Buffer VOID *: A pointer to the destination buffer for the data
-
- @retval EFI_SUCCESS: The data was read correctly from the device
- @retval EFI_DEVICE_ERROR:The device reported an error while attempting to perform
- the read operation
- @retval EFI_NO_MEDIA: There is no media in the device
- @retval EFI_MEDIA_CHANGED: The MediaId is not for the current media
- @retval EFI_BAD_BUFFER_SIZE: The BufferSize parameter is not a multiple of the
- intrinsic block size of the device
- @retval EFI_INVALID_PARAMETER:The read request contains LBAs that are not valid,
- or the buffer is not on proper alignment
+ Read BufferSize bytes from Lba into Buffer.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId Id of the media, changes every time the media is replaced.
+ @param Lba The starting Logical Block Address to read from
+ @param BufferSize Size of Buffer, must be a multiple of device block size.
+ @param Buffer A pointer to the destination buffer for the data. The caller is
+ responsible for either having implicit or explicit ownership of the buffer.
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
**/
EFI_STATUS
@@ -125,14 +116,14 @@ EFIAPI FddReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
- Status = FddReadWriteBlocks (This, MediaId, LBA, BufferSize, READ, Buffer);
+ Status = FddReadWriteBlocks (This, MediaId, Lba, BufferSize, READ, Buffer);
if (EFI_ERROR (Status)) {
FddReportStatus (This, TRUE);
@@ -142,38 +133,38 @@ FddReadBlocks ( }
/**
- Write a specified number of blocks to the device
-
- @param This EFI_BLOCK_IO *: A pointer to the Block I/O protocol interface
- @param MediaId UINT32: The media id that the write request is for
- @param LBA EFI_LBA: The starting logic block address to be written
- @param BufferSize UINTN: The size in bytes in Buffer
- @param Buffer VOID *: A pointer to the source buffer for the data
-
- @retval EFI_SUCCESS: The data were written correctly to the device
- @retval EFI_WRITE_PROTECTED: The device can not be written to
- @retval EFI_NO_MEDIA: There is no media in the device
- @retval EFI_MEDIA_CHANGED: The MediaId is not for the current media
- @retval EFI_DEVICE_ERROR: The device reported an error while attempting to perform
- the write operation
- @retval EFI_BAD_BUFFER_SIZE: The BufferSize parameter is not a multiple of the
- intrinsic block size of the device
- @retval EFI_INVALID_PARAMETER:The write request contains LBAs that are not valid,
- or the buffer is not on proper alignment
+ Write BufferSize bytes from Lba into Buffer.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId The media ID that the write request is for.
+ @param Lba The starting logical block address to be written. The caller is
+ responsible for writing to only legitimate locations.
+ @param BufferSize Size of Buffer, must be a multiple of device block size.
+ @param Buffer A pointer to the source buffer for the data.
+
+ @retval EFI_SUCCESS The data was written correctly to the device.
+ @retval EFI_WRITE_PROTECTED The device can not be written to.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
+ @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
+
**/
EFI_STATUS
EFIAPI
FddWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
EFI_STATUS Status;
- Status = FddReadWriteBlocks (This, MediaId, LBA, BufferSize, WRITE, Buffer);
+ Status = FddReadWriteBlocks (This, MediaId, Lba, BufferSize, WRITE, Buffer);
if (EFI_ERROR (Status)) {
FddReportStatus (This, FALSE);
@@ -183,36 +174,31 @@ FddWriteBlocks ( }
/**
- Read or Write a number of blocks to floppy device
-
- @param This Pointer to instance of EFI_BLOCK_IO_PROTOCOL
- @param MediaId The media id of read/write request
- @param LBA The starting logic block address to read from on the device
- @param BufferSize The size of the Buffer in bytes
- @param Operation - GC_TODO: add argument description
- @param Buffer - GC_TODO: add argument description
-
- @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
- @retval EFI_SUCCESS - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_NO_MEDIA - GC_TODO: Add description for return value
- @retval EFI_MEDIA_CHANGED - GC_TODO: Add description for return value
- @retval EFI_WRITE_PROTECTED - GC_TODO: Add description for return value
- @retval EFI_BAD_BUFFER_SIZE - GC_TODO: Add description for return value
- @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
- @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
- @retval EFI_SUCCESS - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
- @retval EFI_SUCCESS - GC_TODO: Add description for return value
+ Read or Write a number of blocks to floppy disk
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId Id of the media, changes every time the media is replaced.
+ @param Lba The starting Logical Block Address to read from
+ @param BufferSize Size of Buffer, must be a multiple of device block size.
+ @param Operation Specifies the read or write operation.
+ @param Buffer A pointer to the destination buffer for the data. The caller is
+ responsible for either having implicit or explicit ownership of the buffer.
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
+ or the buffer is not on proper alignment.
+ @retval EFI_WRITE_PROTECTED The device can not be written to.
**/
EFI_STATUS
FddReadWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
- IN EFI_LBA LBA,
+ IN EFI_LBA Lba,
IN UINTN BufferSize,
IN BOOLEAN Operation,
OUT VOID *Buffer
@@ -224,10 +210,7 @@ FddReadWriteBlocks ( UINTN NumberOfBlocks;
UINTN BlockCount;
EFI_STATUS Status;
- //
- // EFI_STATUS CacheStatus;
- //
- EFI_LBA LBA0;
+ EFI_LBA Lba0;
UINT8 *Pointer;
//
@@ -238,7 +221,7 @@ FddReadWriteBlocks ( FdcDev = FDD_BLK_IO_FROM_THIS (This);
if (Operation == WRITE) {
- if (LBA == 0) {
+ if (Lba == 0) {
FdcFreeCache (FdcDev);
}
}
@@ -274,13 +257,6 @@ FddReadWriteBlocks ( if (!(Media->MediaPresent)) {
MotorOff (FdcDev);
FdcFreeCache (FdcDev);
-
- /*
- if (FdcDev->Cache) {
- gBS->FreePool (FdcDev->Cache);
- FdcDev->Cache = NULL;
- }
-*/
return EFI_NO_MEDIA;
}
//
@@ -306,12 +282,12 @@ FddReadWriteBlocks ( return EFI_BAD_BUFFER_SIZE;
}
- if (LBA > Media->LastBlock) {
+ if (Lba > Media->LastBlock) {
MotorOff (FdcDev);
return EFI_INVALID_PARAMETER;
}
- if (((BufferSize / BlockSize) + LBA - 1) > Media->LastBlock) {
+ if (((BufferSize / BlockSize) + Lba - 1) > Media->LastBlock) {
MotorOff (FdcDev);
return EFI_INVALID_PARAMETER;
}
@@ -320,8 +296,8 @@ FddReadWriteBlocks ( //
// See if the data that is being read is already in the cache
//
- if (FdcDev->Cache) {
- if (LBA == 0 && BufferSize == BlockSize) {
+ if (FdcDev->Cache != NULL) {
+ if (Lba == 0 && BufferSize == BlockSize) {
MotorOff (FdcDev);
CopyMem ((UINT8 *) Buffer, (UINT8 *) FdcDev->Cache, BlockSize);
return EFI_SUCCESS;
@@ -338,26 +314,26 @@ FddReadWriteBlocks ( }
NumberOfBlocks = BufferSize / BlockSize;
- LBA0 = LBA;
+ Lba0 = Lba;
Pointer = Buffer;
//
// read blocks in the same cylinder.
// in a cylinder , there are 18 * 2 = 36 blocks
//
- BlockCount = GetTransferBlockCount (FdcDev, LBA, NumberOfBlocks);
+ BlockCount = GetTransferBlockCount (FdcDev, Lba, NumberOfBlocks);
while ((BlockCount != 0) && !EFI_ERROR (Status)) {
- Status = ReadWriteDataSector (FdcDev, Buffer, LBA, BlockCount, Operation);
+ Status = ReadWriteDataSector (FdcDev, Buffer, Lba, BlockCount, Operation);
if (EFI_ERROR (Status)) {
MotorOff (FdcDev);
FddReset (FdcDev);
return EFI_DEVICE_ERROR;
}
- LBA += BlockCount;
+ Lba += BlockCount;
NumberOfBlocks -= BlockCount;
Buffer = (VOID *) ((UINTN) Buffer + BlockCount * BlockSize);
- BlockCount = GetTransferBlockCount (FdcDev, LBA, NumberOfBlocks);
+ BlockCount = GetTransferBlockCount (FdcDev, Lba, NumberOfBlocks);
}
Buffer = Pointer;
@@ -371,7 +347,7 @@ FddReadWriteBlocks ( //
// Cache the data read
//
- if (LBA0 == 0 && !FdcDev->Cache) {
+ if (Lba0 == 0 && FdcDev->Cache == NULL) {
FdcDev->Cache = AllocateCopyPool (BlockSize, Buffer);
}
}
@@ -381,18 +357,18 @@ FddReadWriteBlocks ( }
/**
- Common interface for free cache
+ Free cache for a floppy disk.
- @param FdcDev Pointer of FDC_BLK_IO_DEV instance
+ @param FdcDev A Pointer to FDC_BLK_IO_DEV instance
**/
VOID
FdcFreeCache (
- IN FDC_BLK_IO_DEV *FdcDev
+ IN FDC_BLK_IO_DEV *FdcDev
)
{
- if (FdcDev->Cache) {
- gBS->FreePool (FdcDev->Cache);
+ if (FdcDev->Cache != NULL) {
+ FreePool (FdcDev->Cache);
FdcDev->Cache = NULL;
}
}
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyCtrl.c b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyCtrl.c index fab96051fd..60df61f081 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyCtrl.c +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyCtrl.c @@ -1,15 +1,7 @@ -/**@file
- ISA Floppy Driver
- 1. Support two types diskette drive
- 1.44M drive and 2.88M drive (and now only support 1.44M)
- 2. Support two diskette drives
- 3. Use DMA channel 2 to transfer data
- 4. Do not use interrupt
- 5. Support diskette change line signal and write protect
-
- The internal function for the floppy driver
+/** @file
+ Internal floppy disk controller programming functions for the floppy driver.
-Copyright (c) 2006 - 2007, Intel Corporation.<BR>
+Copyright (c) 2006 - 2009, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -23,13 +15,12 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "IsaFloppy.h"
/**
-
- Detect the floppy drive is presented or not
+ Detect whether a floppy drive is present or not.
- @param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
- @retval EFI_SUCCESS Drive is presented
- @retval EFI_NOT_FOUND Drive is not presented
+ @param[in] FdcDev A pointer to the FDC_BLK_IO_DEV
+ @retval EFI_SUCCESS The floppy disk drive is present
+ @retval EFI_NOT_FOUND The floppy disk drive is not present
**/
EFI_STATUS
DiscoverFddDevice (
@@ -40,9 +31,6 @@ DiscoverFddDevice ( FdcDev->BlkIo.Media = &FdcDev->BlkMedia;
- //
- // Call FddIndentify subroutine
- //
Status = FddIdentify (FdcDev);
if (EFI_ERROR (Status)) {
return EFI_NOT_FOUND;
@@ -59,13 +47,13 @@ DiscoverFddDevice ( }
/**
-
- Do recalibrate and see the drive is presented or not
- Set the media parameters
+ Do recalibrate and check if the drive is present or not
+ and set the media parameters if the driver is present.
- @param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
- @return the drive is presented or not
+ @param[in] FdcDev A pointer to the FDC_BLK_IO_DEV
+ @retval EFI_SUCCESS The floppy disk drive is present
+ @retval EFI_DEVICE_ERROR The floppy disk drive is not present
**/
EFI_STATUS
FddIdentify (
@@ -94,9 +82,6 @@ FddIdentify ( //
FdcDev->BlkIo.Media->RemovableMedia = TRUE;
FdcDev->BlkIo.Media->MediaPresent = TRUE;
- //
- // investigate
- //
FdcDev->BlkIo.Media->MediaId = 0;
//
@@ -137,10 +122,9 @@ FddIdentify ( }
/**
-
- Reset the Floppy Logic Drive
+ Reset the Floppy Logic Drive.
- @param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
+ @param FdcDev FDC_BLK_IO_DEV * : A pointer to the FDC_BLK_IO_DEV
@retval EFI_SUCCESS: The Floppy Logic Drive is reset
@retval EFI_DEVICE_ERROR: The Floppy Logic Drive is not functioning correctly and
@@ -152,7 +136,7 @@ FddReset ( IN FDC_BLK_IO_DEV *FdcDev
)
{
- UINT8 data;
+ UINT8 Data;
UINT8 StatusRegister0;
UINT8 PresentCylinderNumber;
UINTN Index;
@@ -179,9 +163,9 @@ FddReset ( // use bit0 & bit1 to select the logic drive
// write "0" to bit2
//
- data = 0x0;
- data = (UINT8) (data | (SELECT_DRV & FdcDev->Disk));
- FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);
+ Data = 0x0;
+ Data = (UINT8) (Data | (SELECT_DRV & FdcDev->Disk));
+ FdcWritePort (FdcDev, FDC_REGISTER_DOR, Data);
//
// wait some time,at least 120us
@@ -193,8 +177,8 @@ FddReset ( // write "1" to bit2
// write "1" to bit3 : enable DMA
//
- data |= 0x0C;
- FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);
+ Data |= 0x0C;
+ FdcWritePort (FdcDev, FDC_REGISTER_DOR, Data);
//
// Experience value
@@ -236,16 +220,13 @@ FddReset ( }
/**
-
- Turn the drive's motor on
- The drive's motor must be on before any command can be executed
+ Turn the floppy disk drive's motor on.
+ The drive's motor must be on before any command can be executed.
- @param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
+ @param[in] FdcDev A pointer to the FDC_BLK_IO_DEV
- @retval EFI_SUCCESS: Turn the drive's motor on successfully
- @retval EFI_DEVICE_ERROR: The drive is busy, so can not turn motor on
- @retval EFI_INVALID_PARAMETER: Fail to Set timer(Cancel timer)
-
+ @retval EFI_SUCCESS The drive's motor was turned on successfully
+ @retval EFI_DEVICE_ERROR The drive is busy, so can not turn motor on
**/
EFI_STATUS
MotorOn (
@@ -253,7 +234,7 @@ MotorOn ( )
{
EFI_STATUS Status;
- UINT8 data;
+ UINT8 DorData;
//
// Control of the floppy drive motors is a big pain. If motor is off, you have
@@ -269,17 +250,15 @@ MotorOn ( // Cancel the timer
//
Status = gBS->SetTimer (FdcDev->Event, TimerCancel, 0);
+ ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- return EFI_INVALID_PARAMETER;
- }
//
// Get the motor status
//
- data = FdcReadPort (FdcDev, FDC_REGISTER_DOR);
+ DorData = FdcReadPort (FdcDev, FDC_REGISTER_DOR);
- if (((FdcDev->Disk == FDC_DISK0) && ((data & 0x10) == 0x10)) ||
- ((FdcDev->Disk == FDC_DISK1) && ((data & 0x21) == 0x21))
+ if (((FdcDev->Disk == FdcDisk0) && ((DorData & 0x10) == 0x10)) ||
+ ((FdcDev->Disk == FdcDisk1) && ((DorData & 0x21) == 0x21))
) {
return EFI_SUCCESS;
}
@@ -293,21 +272,21 @@ MotorOn ( //
// for drive A: 1CH, drive B: 2DH
//
- data = 0x0C;
- data = (UINT8) (data | (SELECT_DRV & FdcDev->Disk));
- if (FdcDev->Disk == FDC_DISK0) {
+ DorData = 0x0C;
+ DorData = (UINT8) (DorData | (SELECT_DRV & FdcDev->Disk));
+ if (FdcDev->Disk == FdcDisk0) {
//
// drive A
//
- data |= DRVA_MOTOR_ON;
+ DorData |= DRVA_MOTOR_ON;
} else {
//
// drive B
//
- data |= DRVB_MOTOR_ON;
+ DorData |= DRVB_MOTOR_ON;
}
- FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);
+ FdcWritePort (FdcDev, FDC_REGISTER_DOR, DorData);
//
// Experience value
@@ -318,15 +297,12 @@ MotorOn ( }
/**
-
- Set a Timer and when Timer goes off, turn the motor off
-
+ Set a Timer and when Timer goes off, turn the motor off.
- @param FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
+ @param[in] FdcDev A pointer to the FDC_BLK_IO_DEV
- @retval EFI_SUCCESS: Set the Timer successfully
- @retval EFI_INVALID_PARAMETER: Fail to Set the timer
-
+ @retval EFI_SUCCESS Set the Timer successfully
+ @retval EFI_INVALID_PARAMETER Fail to Set the timer
**/
EFI_STATUS
MotorOff (
@@ -340,15 +316,14 @@ MotorOff ( }
/**
- Detect the disk in the drive is changed or not
-
+ Detect whether the disk in the drive is changed or not.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param[in] FdcDev A pointer to FDC_BLK_IO_DEV
- @retval EFI_SUCCESS: No disk media change
- @retval EFI_DEVICE_ERROR: Fail to do the recalibrate or seek operation
- @retval EFI_NO_MEDIA: No disk in the drive
- @retval EFI_MEDIA_CHANGED: There is a new disk in the drive
+ @retval EFI_SUCCESS No disk media change
+ @retval EFI_DEVICE_ERROR Fail to do the recalibrate or seek operation
+ @retval EFI_NO_MEDIA No disk in the drive
+ @retval EFI_MEDIA_CHANGED There is a new disk in the drive
**/
EFI_STATUS
DisketChanged (
@@ -356,19 +331,19 @@ DisketChanged ( )
{
EFI_STATUS Status;
- UINT8 data;
+ UINT8 Data;
//
// Check change line
//
- data = FdcReadPort (FdcDev, FDC_REGISTER_DIR);
+ Data = FdcReadPort (FdcDev, FDC_REGISTER_DIR);
//
// Io delay
//
MicroSecondDelay (50);
- if ((data & DIR_DCL) == 0x80) {
+ if ((Data & DIR_DCL) == 0x80) {
//
// disk change line is active
//
@@ -386,14 +361,14 @@ DisketChanged ( //
}
- data = FdcReadPort (FdcDev, FDC_REGISTER_DIR);
+ Data = FdcReadPort (FdcDev, FDC_REGISTER_DIR);
//
// Io delay
//
MicroSecondDelay (50);
- if ((data & DIR_DCL) == 0x80) {
+ if ((Data & DIR_DCL) == 0x80) {
return EFI_NO_MEDIA;
}
@@ -406,13 +381,12 @@ DisketChanged ( /**
Do the Specify command, this command sets DMA operation
and the initial values for each of the three internal
- times: HUT, SRT and HLT
+ times: HUT, SRT and HLT.
- @param FdcDev Pointer to instance of FDC_BLK_IO_DEV
+ @param[in] FdcDev Pointer to instance of FDC_BLK_IO_DEV
- @retval EFI_SUCCESS: Execute the Specify command successfully
- @retval EFI_DEVICE_ERROR: Fail to execute the command
-
+ @retval EFI_SUCCESS Execute the Specify command successfully
+ @retval EFI_DEVICE_ERROR Fail to execute the command
**/
EFI_STATUS
Specify (
@@ -447,9 +421,9 @@ Specify ( }
/**
- Set the head of floppy drive to track 0
+ Set the head of floppy drive to track 0.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev FDC_BLK_IO_DEV *: A pointer to FDC_BLK_IO_DEV
@retval EFI_SUCCESS: Execute the Recalibrate operation successfully
@retval EFI_DEVICE_ERROR: Fail to execute the Recalibrate operation
@@ -474,7 +448,7 @@ Recalibrate ( //
// drive select
//
- if (FdcDev->Disk == FDC_DISK0) {
+ if (FdcDev->Disk == FdcDisk0) {
Command.DiskHeadSel = 0;
//
// 0
@@ -521,9 +495,9 @@ Recalibrate ( }
/**
- Set the head of floppy drive to the new cylinder
+ Set the head of floppy drive to the new cylinder.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev FDC_BLK_IO_DEV *: A pointer to FDC_BLK_IO_DEV
@param Lba EFI_LBA : The logic block address want to seek
@retval EFI_SUCCESS: Execute the Seek operation successfully
@@ -573,7 +547,7 @@ Seek ( ZeroMem (&Command, sizeof (FDD_SEEK_CMD));
Command.CommandCode = SEEK_CMD;
- if (FdcDev->Disk == FDC_DISK0) {
+ if (FdcDev->Disk == FdcDisk0) {
Command.DiskHeadSel = 0;
//
// 0
@@ -625,9 +599,9 @@ Seek ( /**
Do the Sense Interrupt Status command, this command
- resets the interrupt signal
+ resets the interrupt signal.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev FDC_BLK_IO_DEV *: A pointer to FDC_BLK_IO_DEV
@param StatusRegister0 UINT8 *: Be used to save Status Register 0 read from FDC
@param PresentCylinderNumber UINT8 *: Be used to save present cylinder number
read from FDC
@@ -643,10 +617,10 @@ SenseIntStatus ( IN OUT UINT8 *PresentCylinderNumber
)
{
- UINT8 command;
+ UINT8 Command;
- command = SENSE_INT_STATUS_CMD;
- if (EFI_ERROR (DataOutByte (FdcDev, &command))) {
+ Command = SENSE_INT_STATUS_CMD;
+ if (EFI_ERROR (DataOutByte (FdcDev, &Command))) {
return EFI_DEVICE_ERROR;
}
@@ -662,9 +636,9 @@ SenseIntStatus ( }
/**
- Do the Sense Drive Status command
+ Do the Sense Drive Status command.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev FDC_BLK_IO_DEV *: A pointer to FDC_BLK_IO_DEV
@param Lba EFI_LBA : Logic block address
@retval EFI_SUCCESS: Execute the Sense Drive Status command successfully
@@ -693,7 +667,7 @@ SenseDrvStatus ( ZeroMem (&Command, sizeof (FDD_COMMAND_PACKET2));
Command.CommandCode = SENSE_DRV_STATUS_CMD;
- if (FdcDev->Disk == FDC_DISK0) {
+ if (FdcDev->Disk == FdcDisk0) {
Command.DiskHeadSel = 0;
} else {
Command.DiskHeadSel = 1;
@@ -725,10 +699,9 @@ SenseDrvStatus ( }
/**
- Update the disk media properties and if necessary
- reinstall Block I/O interface
+ Update the disk media properties and if necessary reinstall Block I/O interface.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev FDC_BLK_IO_DEV *: A pointer to FDC_BLK_IO_DEV
@retval EFI_SUCCESS: Do the operation successfully
@retval EFI_DEVICE_ERROR: Fail to the operation
@@ -740,13 +713,13 @@ DetectMedia ( )
{
EFI_STATUS Status;
- BOOLEAN bReset;
- BOOLEAN bReadOnlyLastTime;
- BOOLEAN bMediaPresentLastTime;
+ BOOLEAN Reset;
+ BOOLEAN ReadOnlyLastTime;
+ BOOLEAN MediaPresentLastTime;
- bReset = FALSE;
- bReadOnlyLastTime = FdcDev->BlkIo.Media->ReadOnly;
- bMediaPresentLastTime = FdcDev->BlkIo.Media->MediaPresent;
+ Reset = FALSE;
+ ReadOnlyLastTime = FdcDev->BlkIo.Media->ReadOnly;
+ MediaPresentLastTime = FdcDev->BlkIo.Media->MediaPresent;
//
// Check disk change
@@ -756,7 +729,7 @@ DetectMedia ( if (Status == EFI_MEDIA_CHANGED) {
FdcDev->BlkIo.Media->MediaId++;
FdcDev->BlkIo.Media->MediaPresent = TRUE;
- bReset = TRUE;
+ Reset = TRUE;
} else if (Status == EFI_NO_MEDIA) {
FdcDev->BlkIo.Media->MediaPresent = FALSE;
} else if (Status != EFI_SUCCESS) {
@@ -779,15 +752,15 @@ DetectMedia ( }
}
- if (FdcDev->BlkIo.Media->MediaPresent && (bReadOnlyLastTime != FdcDev->BlkIo.Media->ReadOnly)) {
- bReset = TRUE;
+ if (FdcDev->BlkIo.Media->MediaPresent && (ReadOnlyLastTime != FdcDev->BlkIo.Media->ReadOnly)) {
+ Reset = TRUE;
}
- if (bMediaPresentLastTime != FdcDev->BlkIo.Media->MediaPresent) {
- bReset = TRUE;
+ if (MediaPresentLastTime != FdcDev->BlkIo.Media->MediaPresent) {
+ Reset = TRUE;
}
- if (bReset) {
+ if (Reset) {
Status = gBS->ReinstallProtocolInterface (
FdcDev->Handle,
&gEfiBlockIoProtocolGuid,
@@ -804,9 +777,9 @@ DetectMedia ( }
/**
- Set the data rate and so on
+ Set the data rate and so on.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev A pointer to FDC_BLK_IO_DEV
@retval EFI_SUCCESS success to set the data rate
**/
@@ -837,9 +810,9 @@ Setup ( }
/**
- Read or Write a number of blocks in the same cylinder
+ Read or Write a number of blocks in the same cylinder.
- @param FdcDev A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev A pointer to FDC_BLK_IO_DEV
@param HostAddress device address
@param Lba The starting logic block address to read from on the device
@param NumberOfBlocks The number of block wanted to be read or write
@@ -952,7 +925,7 @@ ReadWriteDataSector ( MicroSecondDelay (50);
Times = Times - 1;
- } while (Times);
+ } while (Times >= 0);
if (Times == 0) {
return EFI_TIMEOUT;
@@ -987,7 +960,7 @@ ReadWriteDataSector ( }
/**
- Fill in FDD command's parameter
+ Fill in FDD command's parameter.
@param FdcDev Pointer to instance of FDC_BLK_IO_DEV
@param Lba The starting logic block address to read from on the device
@@ -1011,7 +984,7 @@ FillPara ( //
// Fill the command parameter
//
- if (FdcDev->Disk == FDC_DISK0) {
+ if (FdcDev->Disk == FdcDisk0) {
Command->DiskHeadSel = 0;
} else {
Command->DiskHeadSel = 1;
@@ -1028,23 +1001,22 @@ FillPara ( }
/**
- Read result byte from Data Register of FDC
-
- @param FdcDev Pointer to instance of FDC_BLK_IO_DEV
- @param Pointer UINT8 *: Be used to save result byte read from FDC
+ Read result byte from Data Register of FDC.
+ @param FdcDev Pointer to instance of FDC_BLK_IO_DEV
+ @param Pointer Buffer to store the byte read from FDC
- @retval EFI_SUCCESS: Read result byte from FDC successfully
- @retval EFI_DEVICE_ERROR: The FDC is not ready to be read
+ @retval EFI_SUCCESS Read result byte from FDC successfully
+ @retval EFI_DEVICE_ERROR The FDC is not ready to be read
**/
EFI_STATUS
DataInByte (
- IN FDC_BLK_IO_DEV *FdcDev,
- IN OUT UINT8 *Pointer
+ IN FDC_BLK_IO_DEV *FdcDev,
+ OUT UINT8 *Pointer
)
{
- UINT8 data;
+ UINT8 Data;
//
// wait for 1ms and detect the FDC is ready to be read
@@ -1056,19 +1028,19 @@ DataInByte ( //
}
- data = FdcReadPort (FdcDev, FDC_REGISTER_DTR);
+ Data = FdcReadPort (FdcDev, FDC_REGISTER_DTR);
//
// Io delay
//
MicroSecondDelay (50);
- *Pointer = data;
+ *Pointer = Data;
return EFI_SUCCESS;
}
/**
- Write command byte to Data Register of FDC
+ Write command byte to Data Register of FDC.
@param FdcDev Pointer to instance of FDC_BLK_IO_DEV
@param Pointer Be used to save command byte written to FDC
@@ -1083,21 +1055,21 @@ DataOutByte ( IN UINT8 *Pointer
)
{
- UINT8 data;
+ UINT8 Data;
//
// wait for 1ms and detect the FDC is ready to be written
//
if (EFI_ERROR (FddDRQReady (FdcDev, DATA_OUT, 1))) {
- return EFI_DEVICE_ERROR;
//
- // is not ready
+ // Not ready
//
+ return EFI_DEVICE_ERROR;
}
- data = *Pointer;
+ Data = *Pointer;
- FdcWritePort (FdcDev, FDC_REGISTER_DTR, data);
+ FdcWritePort (FdcDev, FDC_REGISTER_DTR, Data);
//
// Io delay
@@ -1108,8 +1080,7 @@ DataOutByte ( }
/**
- Detect the specified floppy logic drive is busy or
- not within a period of time
+ Detect the specified floppy logic drive is busy or not within a period of time.
@param FdcDev Indicate it is drive A or drive B
@param TimeoutInSeconds the time period for waiting
@@ -1139,7 +1110,7 @@ FddWaitForBSYClear ( //
// set mask: for drive A set bit0 & bit4; for drive B set bit1 & bit4
//
- Mask = (UINT8) ((FdcDev->Disk == FDC_DISK0 ? MSR_DAB : MSR_DBB) | MSR_CB);
+ Mask = (UINT8) ((FdcDev->Disk == FdcDisk0 ? MSR_DAB : MSR_DBB) | MSR_CB);
Delay = ((TimeoutInSeconds * STALL_1_MSECOND) / 50) + 1;
do {
@@ -1153,7 +1124,7 @@ FddWaitForBSYClear ( MicroSecondDelay (50);
Delay = Delay - 1;
- } while (Delay);
+ } while (Delay >= 0);
if (Delay == 0) {
return EFI_TIMEOUT;
@@ -1164,7 +1135,7 @@ FddWaitForBSYClear ( /**
- Routine Description: Determine whether FDC is ready to write or read
+ Routine Description: Determine whether FDC is ready to write or read.
@param FdcDev Pointer to instance of FDC_BLK_IO_DEV
@param Dio BOOLEAN: Indicate the FDC is waiting to write or read
@@ -1213,7 +1184,7 @@ FddDRQReady ( // Stall for 50 us
//
Delay = Delay - 1;
- } while (Delay);
+ } while (Delay >= 0);
if (Delay == 0) {
return EFI_NOT_READY;
@@ -1226,8 +1197,7 @@ FddDRQReady ( }
/**
- Set FDC control structure's attribute according to
- result
+ Set FDC control structure's attribute according to result.
@param Result Point to result structure
@param FdcDev FDC control structure
@@ -1261,14 +1231,14 @@ CheckResult ( //
// Check Status Register1
//
- if (Result->Status1 & (STS1_EN | STS1_DE | STS1_OR | STS1_ND | STS1_NW | STS1_MA)) {
+ if ((Result->Status1 & (STS1_EN | STS1_DE | STS1_OR | STS1_ND | STS1_NW | STS1_MA)) != 0) {
FdcDev->ControllerState->NeedRecalibrate = TRUE;
return EFI_DEVICE_ERROR;
}
//
// Check Status Register2
//
- if (Result->Status2 & (STS2_CM | STS2_DD | STS2_WC | STS2_BC | STS2_MD)) {
+ if ((Result->Status2 & (STS2_CM | STS2_DD | STS2_WC | STS2_BC | STS2_MD)) != 0) {
FdcDev->ControllerState->NeedRecalibrate = TRUE;
return EFI_DEVICE_ERROR;
}
@@ -1277,7 +1247,7 @@ CheckResult ( }
/**
- Check the drive status information
+ Check the drive status information.
@param StatusRegister3 the value of Status Register 3
@@ -1290,7 +1260,7 @@ CheckStatus3 ( IN UINT8 StatusRegister3
)
{
- if (StatusRegister3 & STS3_WP) {
+ if ((StatusRegister3 & STS3_WP) != 0) {
return EFI_WRITE_PROTECTED;
}
@@ -1298,10 +1268,9 @@ CheckStatus3 ( }
/**
- Calculate the number of block in the same cylinder
- according to LBA
+ Calculate the number of block in the same cylinder according to LBA.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
+ @param FdcDev FDC_BLK_IO_DEV *: A pointer to FDC_BLK_IO_DEV
@param LBA EFI_LBA: The starting logic block address
@param NumberOfBlocks UINTN: The number of blocks
@@ -1335,7 +1304,7 @@ GetTransferBlockCount ( }
/**
- When the Timer(2s) off, turn the drive's motor off
+ When the Timer(2s) off, turn the drive's motor off.
@param Event EFI_EVENT: Event(the timer) whose notification function is being
invoked
@@ -1350,35 +1319,36 @@ FddTimerProc ( )
{
FDC_BLK_IO_DEV *FdcDev;
- UINT8 data;
+ UINT8 Data;
FdcDev = (FDC_BLK_IO_DEV *) Context;
//
// Get the motor status
//
- data = FdcReadPort (FdcDev, FDC_REGISTER_DOR);
+ Data = FdcReadPort (FdcDev, FDC_REGISTER_DOR);
- if (((FdcDev->Disk == FDC_DISK0) && ((data & 0x10) != 0x10)) ||
- ((FdcDev->Disk == FDC_DISK1) && ((data & 0x21) != 0x21))
+ if (((FdcDev->Disk == FdcDisk0) && ((Data & 0x10) != 0x10)) ||
+ ((FdcDev->Disk == FdcDisk1) && ((Data & 0x21) != 0x21))
) {
return ;
}
//
// the motor is on, so need motor off
//
- data = 0x0C;
- data = (UINT8) (data | (SELECT_DRV & FdcDev->Disk));
- FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);
+ Data = 0x0C;
+ Data = (UINT8) (Data | (SELECT_DRV & FdcDev->Disk));
+ FdcWritePort (FdcDev, FDC_REGISTER_DOR, Data);
MicroSecondDelay (500);
}
/**
- Read I/O port for FDC
+ Read an I/O port of FDC.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
- @param Offset The offset address of port
+ @param[in] FdcDev A pointer to FDC_BLK_IO_DEV.
+ @param[in] Offset The address offset of the I/O port.
+ @retval 8-bit data read from the I/O port.
**/
UINT8
FdcReadPort (
@@ -1386,29 +1356,27 @@ FdcReadPort ( IN UINT32 Offset
)
{
+ EFI_STATUS Status;
UINT8 Data;
- //
- // Call IsaIo
- //
- FdcDev->IsaIo->Io.Read (
- FdcDev->IsaIo,
- EfiIsaIoWidthUint8,
- FdcDev->BaseAddress + Offset,
- 1,
- &Data
- );
+ Status = FdcDev->IsaIo->Io.Read (
+ FdcDev->IsaIo,
+ EfiIsaIoWidthUint8,
+ FdcDev->BaseAddress + Offset,
+ 1,
+ &Data
+ );
+ ASSERT_EFI_ERROR (Status);
return Data;
}
/**
- Write I/O port for FDC
+ Write an I/O port of FDC.
- @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
- @param Offset The offset address of port
- @param Data Value written to port
-
+ @param[in] FdcDev A pointer to FDC_BLK_IO_DEV
+ @param[in] Offset The address offset of the I/O port
+ @param[in] Data 8-bit Value written to the I/O port
**/
VOID
FdcWritePort (
@@ -1417,16 +1385,15 @@ FdcWritePort ( IN UINT8 Data
)
{
+ EFI_STATUS Status;
- //
- // Call IsaIo
- //
- FdcDev->IsaIo->Io.Write (
- FdcDev->IsaIo,
- EfiIsaIoWidthUint8,
- FdcDev->BaseAddress + Offset,
- 1,
- &Data
- );
+ Status = FdcDev->IsaIo->Io.Write (
+ FdcDev->IsaIo,
+ EfiIsaIoWidthUint8,
+ FdcDev->BaseAddress + Offset,
+ 1,
+ &Data
+ );
+ ASSERT_EFI_ERROR (Status);
}
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf index 288bf4e28d..abfa1e2ebb 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf @@ -1,15 +1,14 @@ #/** @file
# Component description file for IsaFloppy module.
#
-# ISA Floppy Driver
-# 1. Support two types diskette drive
-# 1.44M drive and 2.88M drive (and now only support 1.44M)
-# 2. Support two diskette drives
+# ISA Floppy Disk UEFI Driver conforming to the UEFI driver model
+#
+# 1. Support two types diskette drive
+# 1.44M drive and 2.88M drive (and now only support 1.44M)
+# 2. Support two diskette drives per floppy disk controller
# 3. Use DMA channel 2 to transfer data
# 4. Do not use interrupt
# 5. Support diskette change line signal and write protect
-#
-# Conforming to EFI driver model
#
# Copyright (c) 2007 - 2009, Intel Corporation
#
@@ -61,10 +60,13 @@ UefiDriverEntryPoint
DebugLib
TimerLib
+ PcdLib
[Protocols]
gEfiIsaIoProtocolGuid # PROTOCOL TO_START
gEfiBlockIoProtocolGuid # PROTOCOL BY_START
gEfiDevicePathProtocolGuid # PROTOCOL TO_START
-
+[FeaturePcd.common]
+ gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable # CONSUMES
+ gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable # CONSUMES
|