diff options
Diffstat (limited to 'IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe')
8 files changed, 0 insertions, 1283 deletions
diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/DataHubStatusCodeWorker.c b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/DataHubStatusCodeWorker.c deleted file mode 100644 index ffee2f9c2a..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/DataHubStatusCodeWorker.c +++ /dev/null @@ -1,390 +0,0 @@ -/** @file
- Data Hub status code worker.
-
- Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "StatusCodeRuntimeDxe.h"
-
-//
-// Initialize FIFO to cache records.
-//
-LIST_ENTRY mRecordsFifo = INITIALIZE_LIST_HEAD_VARIABLE (mRecordsFifo);
-LIST_ENTRY mRecordsBuffer = INITIALIZE_LIST_HEAD_VARIABLE (mRecordsBuffer);
-UINT32 mLogDataHubStatus = 0;
-EFI_EVENT mLogDataHubEvent;
-//
-// Cache data hub protocol.
-//
-EFI_DATA_HUB_PROTOCOL *mDataHubProtocol = NULL;
-
-
-/**
- Retrieve one record of from free record buffer. This record is removed from
- free record buffer.
-
- This function retrieves one record from free record buffer.
- If the pool has been exhausted, then new memory would be allocated for it.
-
- @return Pointer to the free record.
- NULL means failure to allocate new memeory for free record buffer.
-
-**/
-DATA_HUB_STATUS_CODE_DATA_RECORD *
-AcquireRecordBuffer (
- VOID
- )
-{
- DATAHUB_STATUSCODE_RECORD *Record;
- EFI_TPL CurrentTpl;
- LIST_ENTRY *Node;
- UINT32 Index;
-
- CurrentTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-
- if (!IsListEmpty (&mRecordsBuffer)) {
- //
- // Strip one entry from free record buffer.
- //
- Node = GetFirstNode (&mRecordsBuffer);
- RemoveEntryList (Node);
-
- Record = BASE_CR (Node, DATAHUB_STATUSCODE_RECORD, Node);
- } else {
- if (CurrentTpl > TPL_NOTIFY) {
- //
- // Memory management should work at <=TPL_NOTIFY
- //
- gBS->RestoreTPL (CurrentTpl);
- return NULL;
- }
-
- //
- // If free record buffer is exhausted, then allocate 16 new records for it.
- //
- gBS->RestoreTPL (CurrentTpl);
- Record = (DATAHUB_STATUSCODE_RECORD *) AllocateZeroPool (sizeof (DATAHUB_STATUSCODE_RECORD) * 16);
- if (Record == NULL) {
- return NULL;
- }
-
- CurrentTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
- //
- // Here we only insert 15 new records to the free record buffer, for the first record
- // will be returned immediately.
- //
- for (Index = 1; Index < 16; Index++) {
- InsertTailList (&mRecordsBuffer, &Record[Index].Node);
- }
- }
-
- Record->Signature = DATAHUB_STATUS_CODE_SIGNATURE;
- InsertTailList (&mRecordsFifo, &Record->Node);
-
- gBS->RestoreTPL (CurrentTpl);
-
- return (DATA_HUB_STATUS_CODE_DATA_RECORD *) (Record->Data);
-}
-
-
-/**
- Retrieve one record from Records FIFO. The record would be removed from FIFO.
-
- @return Point to record, which is ready to be logged.
- NULL means the FIFO of record is empty.
-
-**/
-DATA_HUB_STATUS_CODE_DATA_RECORD *
-RetrieveRecord (
- VOID
- )
-{
- DATA_HUB_STATUS_CODE_DATA_RECORD *RecordData;
- DATAHUB_STATUSCODE_RECORD *Record;
- LIST_ENTRY *Node;
- EFI_TPL CurrentTpl;
-
- RecordData = NULL;
-
- CurrentTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-
- if (!IsListEmpty (&mRecordsFifo)) {
- Node = GetFirstNode (&mRecordsFifo);
- Record = CR (Node, DATAHUB_STATUSCODE_RECORD, Node, DATAHUB_STATUS_CODE_SIGNATURE);
- ASSERT (Record != NULL);
-
- RemoveEntryList (&Record->Node);
- RecordData = (DATA_HUB_STATUS_CODE_DATA_RECORD *) Record->Data;
- }
-
- gBS->RestoreTPL (CurrentTpl);
-
- return RecordData;
-}
-
-/**
- Release given record and return it to free record buffer.
-
- @param RecordData Pointer to the record to release.
-
-**/
-VOID
-ReleaseRecord (
- DATA_HUB_STATUS_CODE_DATA_RECORD *RecordData
- )
-{
- DATAHUB_STATUSCODE_RECORD *Record;
- EFI_TPL CurrentTpl;
-
- Record = CR (RecordData, DATAHUB_STATUSCODE_RECORD, Data[0], DATAHUB_STATUS_CODE_SIGNATURE);
- ASSERT (Record != NULL);
-
- CurrentTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-
- InsertTailList (&mRecordsBuffer, &Record->Node);
- Record->Signature = 0;
-
- gBS->RestoreTPL (CurrentTpl);
-}
-
-/**
- Report status code into DataHub.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
- @param CallerId This optional parameter may be used to identify the caller.
- This parameter allows the status code driver to apply different rules to
- different callers.
- @param Data This optional parameter may be used to pass additional data.
-
- @retval EFI_SUCCESS The function completed successfully.
- @retval EFI_DEVICE_ERROR Function is reentered.
- @retval EFI_DEVICE_ERROR Function is called at runtime.
- @retval EFI_OUT_OF_RESOURCES Fail to allocate memory for free record buffer.
-
-**/
-EFI_STATUS
-DataHubStatusCodeReportWorker (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN EFI_GUID *CallerId,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- )
-{
- DATA_HUB_STATUS_CODE_DATA_RECORD *Record;
- UINT32 ErrorLevel;
- BASE_LIST Marker;
- CHAR8 *Format;
- UINTN CharCount;
- EFI_STATUS Status;
-
- //
- // Use atom operation to avoid the reentant of report.
- // If current status is not zero, then the function is reentrancy.
- //
- if (InterlockedCompareExchange32 (&mLogDataHubStatus, 0, 0) == 1) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // See whether in runtime phase or not.
- //
- if (EfiAtRuntime ()) {
- return EFI_DEVICE_ERROR;
- }
-
- if (mDataHubProtocol == NULL) {
- Status = DataHubStatusCodeInitializeWorker ();
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- Record = AcquireRecordBuffer ();
- if (Record == NULL) {
- //
- // There are no empty record buffer in private buffers
- //
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // Construct Data Hub Extended Data
- //
- Record->CodeType = CodeType;
- Record->Value = Value;
- Record->Instance = Instance;
-
- if (CallerId != NULL) {
- CopyMem (&Record->CallerId, CallerId, sizeof (EFI_GUID));
- }
-
- if (Data != NULL) {
- if (ReportStatusCodeExtractDebugInfo (Data, &ErrorLevel, &Marker, &Format)) {
- CharCount = UnicodeBSPrintAsciiFormat (
- (CHAR16 *) (Record + 1),
- EFI_STATUS_CODE_DATA_MAX_SIZE,
- Format,
- Marker
- );
- //
- // Change record data type to DebugType.
- //
- CopyGuid (&Record->Data.Type, &gEfiStatusCodeDataTypeDebugGuid);
- Record->Data.HeaderSize = Data->HeaderSize;
- Record->Data.Size = (UINT16) ((CharCount + 1) * sizeof (CHAR16));
- } else {
- //
- // Copy status code data header
- //
- CopyMem (&Record->Data, Data, sizeof (EFI_STATUS_CODE_DATA));
-
- if (Data->Size > EFI_STATUS_CODE_DATA_MAX_SIZE) {
- Record->Data.Size = EFI_STATUS_CODE_DATA_MAX_SIZE;
- }
- CopyMem ((VOID *) (Record + 1), Data + 1, Record->Data.Size);
- }
- }
-
- gBS->SignalEvent (mLogDataHubEvent);
-
- return EFI_SUCCESS;
-}
-
-
-/**
- The Event handler which will be notified to log data in Data Hub.
-
- @param Event Instance of the EFI_EVENT to signal whenever data is
- available to be logged in the system.
- @param Context Context of the event.
-
-**/
-VOID
-EFIAPI
-LogDataHubEventCallBack (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- DATA_HUB_STATUS_CODE_DATA_RECORD *Record;
- UINT32 Size;
- UINT64 DataRecordClass;
-
- //
- // Use atom operation to avoid the reentant of report.
- // If current status is not zero, then the function is reentrancy.
- //
- if (InterlockedCompareExchange32 (&mLogDataHubStatus, 0, 1) == 1) {
- return;
- }
-
- //
- // Log DataRecord in Data Hub.
- // Journal records fifo to find all record entry.
- //
- while (TRUE) {
- //
- // Retrieve record from record FIFO until no more record can be retrieved.
- //
- Record = RetrieveRecord ();
- if (Record == NULL) {
- break;
- }
- //
- // Add in the size of the header we added.
- //
- Size = sizeof (DATA_HUB_STATUS_CODE_DATA_RECORD) + (UINT32) Record->Data.Size;
-
- if ((Record->CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) {
- DataRecordClass = EFI_DATA_RECORD_CLASS_PROGRESS_CODE;
- } else if ((Record->CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) {
- DataRecordClass = EFI_DATA_RECORD_CLASS_ERROR;
- } else if ((Record->CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_DEBUG_CODE) {
- DataRecordClass = EFI_DATA_RECORD_CLASS_DEBUG;
- } else {
- //
- // Should never get here.
- //
- DataRecordClass = EFI_DATA_RECORD_CLASS_DEBUG |
- EFI_DATA_RECORD_CLASS_ERROR |
- EFI_DATA_RECORD_CLASS_DATA |
- EFI_DATA_RECORD_CLASS_PROGRESS_CODE;
- }
-
- //
- // Log DataRecord in Data Hub
- //
- mDataHubProtocol->LogData (
- mDataHubProtocol,
- &gEfiDataHubStatusCodeRecordGuid,
- &gEfiStatusCodeRuntimeProtocolGuid,
- DataRecordClass,
- Record,
- Size
- );
-
- ReleaseRecord (Record);
- }
-
- //
- // Restore the nest status of report
- //
- InterlockedCompareExchange32 (&mLogDataHubStatus, 1, 0);
-}
-
-
-/**
- Locate Data Hub Protocol and create event for logging data
- as initialization for data hub status code worker.
-
- @retval EFI_SUCCESS Initialization is successful.
-
-**/
-EFI_STATUS
-DataHubStatusCodeInitializeWorker (
- VOID
- )
-{
- EFI_STATUS Status;
-
- Status = gBS->LocateProtocol (
- &gEfiDataHubProtocolGuid,
- NULL,
- (VOID **) &mDataHubProtocol
- );
- if (EFI_ERROR (Status)) {
- mDataHubProtocol = NULL;
- return Status;
- }
-
- //
- // Create a Notify Event to log data in Data Hub
- //
- Status = gBS->CreateEvent (
- EVT_NOTIFY_SIGNAL,
- TPL_CALLBACK,
- LogDataHubEventCallBack,
- NULL,
- &mLogDataHubEvent
- );
-
- ASSERT_EFI_ERROR (Status);
-
- return EFI_SUCCESS;
-}
-
-
diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/RtMemoryStatusCodeWorker.c b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/RtMemoryStatusCodeWorker.c deleted file mode 100644 index 2a26e19e65..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/RtMemoryStatusCodeWorker.c +++ /dev/null @@ -1,104 +0,0 @@ -/** @file
- Runtime memory status code worker.
-
- Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "StatusCodeRuntimeDxe.h"
-
-RUNTIME_MEMORY_STATUSCODE_HEADER *mRtMemoryStatusCodeTable;
-
-/**
- Initialize runtime memory status code table as initialization for runtime memory status code worker
-
- @retval EFI_SUCCESS Runtime memory status code table successfully initialized.
-
-**/
-EFI_STATUS
-RtMemoryStatusCodeInitializeWorker (
- VOID
- )
-{
- //
- // Allocate runtime memory status code pool.
- //
- mRtMemoryStatusCodeTable = AllocateRuntimePool (
- sizeof (RUNTIME_MEMORY_STATUSCODE_HEADER) +
- PcdGet16 (PcdStatusCodeMemorySize) * 1024
- );
- ASSERT (mRtMemoryStatusCodeTable != NULL);
-
- mRtMemoryStatusCodeTable->RecordIndex = 0;
- mRtMemoryStatusCodeTable->NumberOfRecords = 0;
- mRtMemoryStatusCodeTable->MaxRecordsNumber =
- (PcdGet16 (PcdStatusCodeMemorySize) * 1024) / sizeof (MEMORY_STATUSCODE_RECORD);
-
- return EFI_SUCCESS;
-}
-
-
-/**
- Report status code into runtime memory. If the runtime pool is full, roll back to the
- first record and overwrite it.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
-
- @retval EFI_SUCCESS Status code successfully recorded in runtime memory status code table.
-
-**/
-EFI_STATUS
-RtMemoryStatusCodeReportWorker (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance
- )
-{
- MEMORY_STATUSCODE_RECORD *Record;
-
- //
- // Locate current record buffer.
- //
- Record = (MEMORY_STATUSCODE_RECORD *) (mRtMemoryStatusCodeTable + 1);
- Record = &Record[mRtMemoryStatusCodeTable->RecordIndex++];
-
- //
- // Save status code.
- //
- Record->CodeType = CodeType;
- Record->Value = Value;
- Record->Instance = Instance;
-
- //
- // If record index equals to max record number, then wrap around record index to zero.
- //
- // The reader of status code should compare the number of records with max records number,
- // If it is equal to or larger than the max number, then the wrap-around had happened,
- // so the first record is pointed by record index.
- // If it is less then max number, index of the first record is zero.
- //
- mRtMemoryStatusCodeTable->NumberOfRecords++;
- if (mRtMemoryStatusCodeTable->RecordIndex == mRtMemoryStatusCodeTable->MaxRecordsNumber) {
- //
- // Wrap around record index.
- //
- mRtMemoryStatusCodeTable->RecordIndex = 0;
- }
-
- return EFI_SUCCESS;
-}
-
-
-
diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/SerialStatusCodeWorker.c b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/SerialStatusCodeWorker.c deleted file mode 100644 index e1d02630e7..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/SerialStatusCodeWorker.c +++ /dev/null @@ -1,160 +0,0 @@ -/** @file
- Serial I/O status code reporting worker.
-
- Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "StatusCodeRuntimeDxe.h"
-
-/**
- Convert status code value and extended data to readable ASCII string, send string to serial I/O device.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
- @param CallerId This optional parameter may be used to identify the caller.
- This parameter allows the status code driver to apply different rules to
- different callers.
- @param Data This optional parameter may be used to pass additional data.
-
- @retval EFI_SUCCESS Status code reported to serial I/O successfully.
- @retval EFI_DEVICE_ERROR EFI serial device cannot work after ExitBootService() is called.
- @retval EFI_DEVICE_ERROR EFI serial device cannot work with TPL higher than TPL_CALLBACK.
-
-**/
-EFI_STATUS
-SerialStatusCodeReportWorker (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN EFI_GUID *CallerId,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- )
-{
- CHAR8 *Filename;
- CHAR8 *Description;
- CHAR8 *Format;
- CHAR8 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE];
- UINT32 ErrorLevel;
- UINT32 LineNumber;
- UINTN CharCount;
- BASE_LIST Marker;
-
- Buffer[0] = '\0';
-
- if (Data != NULL &&
- ReportStatusCodeExtractAssertInfo (CodeType, Value, Data, &Filename, &Description, &LineNumber)) {
- //
- // Print ASSERT() information into output buffer.
- //
- CharCount = AsciiSPrint (
- Buffer,
- sizeof (Buffer),
- "\n\rDXE_ASSERT!: %a (%d): %a\n\r",
- Filename,
- LineNumber,
- Description
- );
- } else if (Data != NULL &&
- ReportStatusCodeExtractDebugInfo (Data, &ErrorLevel, &Marker, &Format)) {
- //
- // Print DEBUG() information into output buffer.
- //
- CharCount = AsciiBSPrint (
- Buffer,
- sizeof (Buffer),
- Format,
- Marker
- );
- } else if ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) {
- //
- // Print ERROR information into output buffer.
- //
- CharCount = AsciiSPrint (
- Buffer,
- sizeof (Buffer),
- "ERROR: C%08x:V%08x I%x",
- CodeType,
- Value,
- Instance
- );
-
- if (CallerId != NULL) {
- CharCount += AsciiSPrint (
- &Buffer[CharCount],
- (sizeof (Buffer) - (sizeof (Buffer[0]) * CharCount)),
- " %g",
- CallerId
- );
- }
-
- if (Data != NULL) {
- CharCount += AsciiSPrint (
- &Buffer[CharCount],
- (sizeof (Buffer) - (sizeof (Buffer[0]) * CharCount)),
- " %x",
- Data
- );
- }
-
- CharCount += AsciiSPrint (
- &Buffer[CharCount],
- (sizeof (Buffer) - (sizeof (Buffer[0]) * CharCount)),
- "\n\r"
- );
- } else if ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) {
- //
- // Print PROGRESS information into output buffer.
- //
- CharCount = AsciiSPrint (
- Buffer,
- sizeof (Buffer),
- "PROGRESS CODE: V%08x I%x\n\r",
- Value,
- Instance
- );
- } else if (Data != NULL &&
- CompareGuid (&Data->Type, &gEfiStatusCodeDataTypeStringGuid) &&
- ((EFI_STATUS_CODE_STRING_DATA *) Data)->StringType == EfiStringAscii) {
- //
- // EFI_STATUS_CODE_STRING_DATA
- //
- CharCount = AsciiSPrint (
- Buffer,
- sizeof (Buffer),
- "%a\n\r",
- ((EFI_STATUS_CODE_STRING_DATA *) Data)->String.Ascii
- );
- } else {
- //
- // Code type is not defined.
- //
- CharCount = AsciiSPrint (
- Buffer,
- sizeof (Buffer),
- "Undefined: C%08x:V%08x I%x\n\r",
- CodeType,
- Value,
- Instance
- );
- }
-
- //
- // Call SerialPort Lib function to do print.
- //
- SerialPortWrite ((UINT8 *) Buffer, CharCount);
-
- return EFI_SUCCESS;
-}
-
diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.c b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.c deleted file mode 100644 index 6435e1f727..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.c +++ /dev/null @@ -1,301 +0,0 @@ -/** @file
- Status code driver for IA32/X64/EBC architecture.
-
- Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "StatusCodeRuntimeDxe.h"
-
-EFI_EVENT mVirtualAddressChangeEvent = NULL;
-EFI_HANDLE mHandle = NULL;
-
-//
-// Declaration of status code protocol.
-//
-EFI_STATUS_CODE_PROTOCOL mEfiStatusCodeProtocol = {
- ReportDispatcher
-};
-
-//
-// Report operation nest status.
-// If it is set, then the report operation has nested.
-//
-UINT32 mStatusCodeNestStatus = 0;
-
-/**
- Entry point of DXE Status Code Driver.
-
- This function is the entry point of this DXE Status Code Driver.
- It installs Status Code Runtime Protocol, and registers event for EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE.
-
- @param ImageHandle The firmware allocated handle for the EFI image.
- @param SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS The entry point is executed successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-StatusCodeRuntimeDxeEntry (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
-
- //
- // Dispatch initialization request to supported devices
- //
- InitializationDispatcherWorker ();
-
- //
- // Install Status Code Runtime Protocol implementation as defined in PI Specification.
- //
- Status = gBS->InstallMultipleProtocolInterfaces (
- &mHandle,
- &gEfiStatusCodeRuntimeProtocolGuid,
- &mEfiStatusCodeProtocol,
- NULL
- );
- ASSERT_EFI_ERROR (Status);
-
- Status = gBS->CreateEventEx (
- EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- VirtualAddressChangeCallBack,
- NULL,
- &gEfiEventVirtualAddressChangeGuid,
- &mVirtualAddressChangeEvent
- );
- ASSERT_EFI_ERROR (Status);
-
- return EFI_SUCCESS;
-}
-
-/**
- Report status code to all supported device.
-
- This function implements EFI_STATUS_CODE_PROTOCOL.ReportStatusCode().
- It calls into the workers which dispatches the platform specific listeners.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
- @param CallerId This optional parameter may be used to identify the caller.
- This parameter allows the status code driver to apply different rules to
- different callers.
- @param Data This optional parameter may be used to pass additional data.
-
- @retval EFI_SUCCESS The function completed successfully
- @retval EFI_DEVICE_ERROR The function should not be completed due to a device error.
-
-**/
-EFI_STATUS
-EFIAPI
-ReportDispatcher (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN EFI_GUID *CallerId OPTIONAL,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- )
-{
- //
- // Use atom operation to avoid the reentant of report.
- // If current status is not zero, then the function is reentrancy.
- //
- if (InterlockedCompareExchange32 (&mStatusCodeNestStatus, 0, 1) == 1) {
- return EFI_DEVICE_ERROR;
- }
-
- if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
- SerialStatusCodeReportWorker (
- CodeType,
- Value,
- Instance,
- CallerId,
- Data
- );
- }
- if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
- RtMemoryStatusCodeReportWorker (
- CodeType,
- Value,
- Instance
- );
- }
- if (FeaturePcdGet (PcdStatusCodeUseDataHub)) {
- DataHubStatusCodeReportWorker (
- CodeType,
- Value,
- Instance,
- CallerId,
- Data
- );
- }
- if (FeaturePcdGet (PcdStatusCodeUseOEM)) {
- //
- // Call OEM hook status code library API to report status code to OEM device
- //
- OemHookStatusCodeReport (
- CodeType,
- Value,
- Instance,
- CallerId,
- Data
- );
- }
-
- //
- // Restore the nest status of report
- //
- InterlockedCompareExchange32 (&mStatusCodeNestStatus, 1, 0);
-
- return EFI_SUCCESS;
-}
-
-
-/**
- Virtual address change notification call back. It converts global pointer
- to virtual address.
-
- @param Event Event whose notification function is being invoked.
- @param Context Pointer to the notification function's context, which is
- always zero in current implementation.
-
-**/
-VOID
-EFIAPI
-VirtualAddressChangeCallBack (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- //
- // Convert memory status code table to virtual address;
- //
- EfiConvertPointer (
- 0,
- (VOID **) &mRtMemoryStatusCodeTable
- );
-}
-
-/**
- Dispatch initialization request to sub status code devices based on
- customized feature flags.
-
-**/
-VOID
-InitializationDispatcherWorker (
- VOID
- )
-{
- EFI_PEI_HOB_POINTERS Hob;
- EFI_STATUS Status;
- MEMORY_STATUSCODE_PACKET_HEADER *PacketHeader;
- MEMORY_STATUSCODE_RECORD *Record;
- UINTN Index;
- UINTN MaxRecordNumber;
-
- //
- // If enable UseSerial, then initialize serial port.
- // if enable UseRuntimeMemory, then initialize runtime memory status code worker.
- // if enable UseDataHub, then initialize data hub status code worker.
- //
- if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
- //
- // Call Serial Port Lib API to initialize serial port.
- //
- Status = SerialPortInitialize ();
- ASSERT_EFI_ERROR (Status);
- }
- if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
- Status = RtMemoryStatusCodeInitializeWorker ();
- ASSERT_EFI_ERROR (Status);
- }
- if (FeaturePcdGet (PcdStatusCodeUseDataHub)) {
- DataHubStatusCodeInitializeWorker ();
- }
- if (FeaturePcdGet (PcdStatusCodeUseOEM)) {
- //
- // Call OEM hook status code library API to initialize OEM device for status code.
- //
- Status = OemHookStatusCodeInitialize ();
- ASSERT_EFI_ERROR (Status);
- }
-
- //
- // Replay Status code which saved in GUID'ed HOB to all supported devices.
- //
- if (FeaturePcdGet (PcdStatusCodeReplayIn)) {
- //
- // Journal GUID'ed HOBs to find all record entry, if found,
- // then output record to support replay device.
- //
- Hob.Raw = GetFirstGuidHob (&gMemoryStatusCodeRecordGuid);
- if (Hob.Raw != NULL) {
- PacketHeader = (MEMORY_STATUSCODE_PACKET_HEADER *) GET_GUID_HOB_DATA (Hob.Guid);
- Record = (MEMORY_STATUSCODE_RECORD *) (PacketHeader + 1);
- MaxRecordNumber = (UINTN) PacketHeader->RecordIndex;
- if (PacketHeader->PacketIndex > 0) {
- //
- // Record has been wrapped around. So, record number has arrived at max number.
- //
- MaxRecordNumber = (UINTN) PacketHeader->MaxRecordsNumber;
- }
- for (Index = 0; Index < MaxRecordNumber; Index++) {
- //
- // Dispatch records to devices based on feature flag.
- //
- if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
- SerialStatusCodeReportWorker (
- Record[Index].CodeType,
- Record[Index].Value,
- Record[Index].Instance,
- NULL,
- NULL
- );
- }
- if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
- RtMemoryStatusCodeReportWorker (
- Record[Index].CodeType,
- Record[Index].Value,
- Record[Index].Instance
- );
- }
- if (FeaturePcdGet (PcdStatusCodeUseDataHub)) {
- DataHubStatusCodeReportWorker (
- Record[Index].CodeType,
- Record[Index].Value,
- Record[Index].Instance,
- NULL,
- NULL
- );
- }
- if (FeaturePcdGet (PcdStatusCodeUseOEM)) {
- //
- // Call OEM hook status code library API to report status code to OEM device
- //
- OemHookStatusCodeReport (
- Record[Index].CodeType,
- Record[Index].Value,
- Record[Index].Instance,
- NULL,
- NULL
- );
- }
- }
- }
- }
-}
diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.h b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.h deleted file mode 100644 index 9d0ed19c4a..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.h +++ /dev/null @@ -1,240 +0,0 @@ -/** @file
- Internal include file of Status Code Runtime DXE Driver.
-
- Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __STATUS_CODE_RUNTIME_DXE_H__
-#define __STATUS_CODE_RUNTIME_DXE_H__
-
-
-#include <FrameworkDxe.h>
-#include <Guid/DataHubStatusCodeRecord.h>
-#include <Protocol/DataHub.h>
-#include <Guid/MemoryStatusCodeRecord.h>
-#include <Protocol/StatusCode.h>
-#include <Guid/StatusCodeDataTypeId.h>
-#include <Guid/StatusCodeDataTypeDebug.h>
-#include <Guid/EventGroup.h>
-
-#include <Library/BaseLib.h>
-#include <Library/SynchronizationLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/DebugLib.h>
-#include <Library/ReportStatusCodeLib.h>
-#include <Library/PrintLib.h>
-#include <Library/PcdLib.h>
-#include <Library/HobLib.h>
-#include <Library/UefiDriverEntryPoint.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiRuntimeLib.h>
-#include <Library/SerialPortLib.h>
-#include <Library/OemHookStatusCodeLib.h>
-
-//
-// Data hub worker definition
-//
-#define DATAHUB_STATUS_CODE_SIGNATURE SIGNATURE_32 ('B', 'D', 'H', 'S')
-
-typedef struct {
- UINTN Signature;
- LIST_ENTRY Node;
- UINT8 Data[sizeof(DATA_HUB_STATUS_CODE_DATA_RECORD) + EFI_STATUS_CODE_DATA_MAX_SIZE];
-} DATAHUB_STATUSCODE_RECORD;
-
-
-//
-// Runtime memory status code worker definition
-//
-typedef struct {
- UINT32 RecordIndex;
- UINT32 NumberOfRecords;
- UINT32 MaxRecordsNumber;
-} RUNTIME_MEMORY_STATUSCODE_HEADER;
-
-extern RUNTIME_MEMORY_STATUSCODE_HEADER *mRtMemoryStatusCodeTable;
-
-/**
- Report status code to all supported device.
-
- This function implements EFI_STATUS_CODE_PROTOCOL.ReportStatusCode().
- It calls into the workers which dispatches the platform specific listeners.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
- @param CallerId This optional parameter may be used to identify the caller.
- This parameter allows the status code driver to apply different rules to
- different callers.
- @param Data This optional parameter may be used to pass additional data.
-
- @retval EFI_SUCCESS The function completed successfully
- @retval EFI_DEVICE_ERROR The function should not be completed due to a device error.
-
-**/
-EFI_STATUS
-EFIAPI
-ReportDispatcher (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN EFI_GUID *CallerId OPTIONAL,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- );
-
-/**
- Dispatch initialization request to sub status code devices based on
- customized feature flags.
-
-**/
-VOID
-InitializationDispatcherWorker (
- VOID
- );
-
-
-/**
- Locates Serial I/O Protocol as initialization for serial status code worker.
-
- @retval EFI_SUCCESS Serial I/O Protocol is successfully located.
-
-**/
-EFI_STATUS
-EfiSerialStatusCodeInitializeWorker (
- VOID
- );
-
-
-/**
- Convert status code value and extended data to readable ASCII string, send string to serial I/O device.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
- @param CallerId This optional parameter may be used to identify the caller.
- This parameter allows the status code driver to apply different rules to
- different callers.
- @param Data This optional parameter may be used to pass additional data.
-
- @retval EFI_SUCCESS Status code reported to serial I/O successfully.
- @retval EFI_DEVICE_ERROR EFI serial device cannot work after ExitBootService() is called.
- @retval EFI_DEVICE_ERROR EFI serial device cannot work with TPL higher than TPL_CALLBACK.
-
-**/
-EFI_STATUS
-SerialStatusCodeReportWorker (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN EFI_GUID *CallerId,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- );
-
-/**
- Initialize runtime memory status code table as initialization for runtime memory status code worker
-
- @retval EFI_SUCCESS Runtime memory status code table successfully initialized.
-
-**/
-EFI_STATUS
-RtMemoryStatusCodeInitializeWorker (
- VOID
- );
-
-/**
- Report status code into runtime memory. If the runtime pool is full, roll back to the
- first record and overwrite it.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
-
- @retval EFI_SUCCESS Status code successfully recorded in runtime memory status code table.
-
-**/
-EFI_STATUS
-RtMemoryStatusCodeReportWorker (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance
- );
-
-/**
- Locate Data Hub Protocol and create event for logging data
- as initialization for data hub status code worker.
-
- @retval EFI_SUCCESS Initialization is successful.
-
-**/
-EFI_STATUS
-DataHubStatusCodeInitializeWorker (
- VOID
- );
-
-
-/**
- Report status code into DataHub.
-
- @param CodeType Indicates the type of status code being reported.
- @param Value Describes the current status of a hardware or software entity.
- This included information about the class and subclass that is used to
- classify the entity as well as an operation.
- @param Instance The enumeration of a hardware or software entity within
- the system. Valid instance numbers start with 1.
- @param CallerId This optional parameter may be used to identify the caller.
- This parameter allows the status code driver to apply different rules to
- different callers.
- @param Data This optional parameter may be used to pass additional data.
-
- @retval EFI_SUCCESS The function completed successfully.
- @retval EFI_DEVICE_ERROR Function is reentered.
- @retval EFI_DEVICE_ERROR Function is called at runtime.
- @retval EFI_OUT_OF_RESOURCES Fail to allocate memory for free record buffer.
-
-**/
-EFI_STATUS
-DataHubStatusCodeReportWorker (
- IN EFI_STATUS_CODE_TYPE CodeType,
- IN EFI_STATUS_CODE_VALUE Value,
- IN UINT32 Instance,
- IN EFI_GUID *CallerId,
- IN EFI_STATUS_CODE_DATA *Data OPTIONAL
- );
-
-
-/**
- Virtual address change notification call back. It converts global pointer
- to virtual address.
-
- @param Event Event whose notification function is being invoked.
- @param Context Pointer to the notification function's context, which is
- always zero in current implementation.
-
-**/
-VOID
-EFIAPI
-VirtualAddressChangeCallBack (
- IN EFI_EVENT Event,
- IN VOID *Context
- );
-
-#endif
diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf deleted file mode 100644 index d7c35021a2..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf +++ /dev/null @@ -1,88 +0,0 @@ -## @file
-# Status Code Runtime Dxe driver produces Status Code Runtime Protocol.
-#
-# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = StatusCodeRuntimeDxe
- MODULE_UNI_FILE = StatusCodeRuntimeDxe.uni
- FILE_GUID = FEDE0A1B-BCA2-4A9F-BB2B-D9FD7DEC2E9F
- MODULE_TYPE = DXE_RUNTIME_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = StatusCodeRuntimeDxeEntry
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 EBC
-#
-# VIRTUAL_ADDRESS_MAP_CALLBACK = VirtualAddressChangeCallBack
-#
-
-[Sources]
- SerialStatusCodeWorker.c
- RtMemoryStatusCodeWorker.c
- DataHubStatusCodeWorker.c
- StatusCodeRuntimeDxe.h
- StatusCodeRuntimeDxe.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- IntelFrameworkPkg/IntelFrameworkPkg.dec
- IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec
-
-[LibraryClasses]
- OemHookStatusCodeLib
- SerialPortLib
- UefiRuntimeLib
- MemoryAllocationLib
- UefiLib
- UefiBootServicesTableLib
- UefiDriverEntryPoint
- HobLib
- PcdLib
- PrintLib
- ReportStatusCodeLib
- DebugLib
- BaseMemoryLib
- BaseLib
- SynchronizationLib
-
-
-[Guids]
- gEfiDataHubStatusCodeRecordGuid ## SOMETIMES_PRODUCES ## UNDEFINED # DataRecord Guid
- gEfiStatusCodeDataTypeDebugGuid ## SOMETIMES_PRODUCES ## UNDEFINED # Record data type
- gMemoryStatusCodeRecordGuid ## SOMETIMES_CONSUMES ## HOB
- gEfiEventVirtualAddressChangeGuid ## CONSUMES ## Event
- gEfiStatusCodeDataTypeStringGuid ## SOMETIMES_CONSUMES ## UNDEFINED
-
-[Protocols]
- gEfiStatusCodeRuntimeProtocolGuid ## PRODUCES
- gEfiDataHubProtocolGuid ## SOMETIMES_CONSUMES # Needed if Data Hub is supported for status code
-
-[FeaturePcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn ## CONSUMES
- gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdStatusCodeUseOEM ## CONSUMES
- gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdStatusCodeUseDataHub ## CONSUMES
- gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ## CONSUMES
- gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial ## CONSUMES
-
-[Pcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize |128| gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ## SOMETIMES_CONSUMES
-
-[Depex]
- TRUE
-[UserExtensions.TianoCore."ExtraFiles"]
- StatusCodeRuntimeDxeExtra.uni
diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.uni b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.uni Binary files differdeleted file mode 100644 index 963a16e9e6..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.uni +++ /dev/null diff --git a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxeExtra.uni b/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxeExtra.uni Binary files differdeleted file mode 100644 index ae409adbed..0000000000 --- a/IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxeExtra.uni +++ /dev/null |