diff options
Diffstat (limited to 'MdeModulePkg/Bus/Isa/Ps2MouseDxe')
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.c | 858 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.h | 395 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/ComponentName.c | 223 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.c | 805 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.h | 399 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.inf | 76 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.uni | 22 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxeExtra.uni | 20 |
8 files changed, 0 insertions, 2798 deletions
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.c b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.c deleted file mode 100644 index 04d536c76c..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.c +++ /dev/null @@ -1,858 +0,0 @@ -/** @file
- PS2 Mouse Communication Interface.
-
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "Ps2Mouse.h"
-#include "CommPs2.h"
-
-UINT8 SampleRateTbl[MaxSampleRate] = { 0xa, 0x14, 0x28, 0x3c, 0x50, 0x64, 0xc8 };
-
-UINT8 ResolutionTbl[MaxResolution] = { 0, 1, 2, 3 };
-
-/**
- Issue self test command via IsaIo interface.
-
- @return EFI_SUCCESS Success to do keyboard self testing.
- @return others Fail to do keyboard self testing.
-**/
-EFI_STATUS
-KbcSelfTest (
- VOID
- )
-{
- EFI_STATUS Status;
- UINT8 Data;
-
- //
- // Keyboard controller self test
- //
- Status = Out8042Command (SELF_TEST);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Read return code
- //
- Status = In8042Data (&Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if (Data != 0x55) {
- return EFI_DEVICE_ERROR;
- }
- //
- // Set system flag
- //
- Status = Out8042Command (READ_CMD_BYTE);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = In8042Data (&Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = Out8042Command (WRITE_CMD_BYTE);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Data |= CMD_SYS_FLAG;
- Status = Out8042Data (Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Issue command to enable keyboard AUX functionality.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcEnableAux (
- VOID
- )
-{
- //
- // Send 8042 enable mouse command
- //
- return Out8042Command (ENABLE_AUX);
-}
-
-/**
- Issue command to disable keyboard AUX functionality.
-
- @param IsaIo Pointer to instance of EFI_ISA_IO_PROTOCOL
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcDisableAux (
- VOID
- )
-{
- //
- // Send 8042 disable mouse command
- //
- return Out8042Command (DISABLE_AUX);
-}
-
-/**
- Issue command to enable keyboard.
-
- @param IsaIo Pointer to instance of EFI_ISA_IO_PROTOCOL
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcEnableKb (
- VOID
- )
-{
- //
- // Send 8042 enable keyboard command
- //
- return Out8042Command (ENABLE_KB);
-}
-
-/**
- Issue command to disable keyboard.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcDisableKb (
- VOID
- )
-{
- //
- // Send 8042 disable keyboard command
- //
- return Out8042Command (DISABLE_KB);
-}
-
-/**
- Issue command to check keyboard status.
-
- @param KeyboardEnable return whether keyboard is enable.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-CheckKbStatus (
- OUT BOOLEAN *KeyboardEnable
- )
-{
- EFI_STATUS Status;
- UINT8 Data;
-
- //
- // Send command to read KBC command byte
- //
- Status = Out8042Command (READ_CMD_BYTE);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = In8042Data (&Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Check keyboard enable or not
- //
- if ((Data & CMD_KB_STS) == CMD_KB_DIS) {
- *KeyboardEnable = FALSE;
- } else {
- *KeyboardEnable = TRUE;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Issue command to reset keyboard.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseReset (
- VOID
- )
-{
- EFI_STATUS Status;
- UINT8 Data;
-
- Status = Out8042AuxCommand (RESET_CMD, FALSE);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = In8042AuxData (&Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Check BAT Complete Code
- //
- if (Data != PS2MOUSE_BAT1) {
- return EFI_DEVICE_ERROR;
- }
-
- Status = In8042AuxData (&Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Check BAT Complete Code
- //
- if (Data != PS2MOUSE_BAT2) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Issue command to set mouse's sample rate
-
- @param SampleRate value of sample rate
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseSetSampleRate (
- IN MOUSE_SR SampleRate
- )
-{
- EFI_STATUS Status;
-
- //
- // Send auxiliary command to set mouse sample rate
- //
- Status = Out8042AuxCommand (SETSR_CMD, FALSE);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = Out8042AuxData (SampleRateTbl[SampleRate]);
-
- return Status;
-}
-
-/**
- Issue command to set mouse's resolution.
-
- @param Resolution value of resolution
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseSetResolution (
- IN MOUSE_RE Resolution
- )
-{
- EFI_STATUS Status;
-
- //
- // Send auxiliary command to set mouse resolution
- //
- Status = Out8042AuxCommand (SETRE_CMD, FALSE);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = Out8042AuxData (ResolutionTbl[Resolution]);
-
- return Status;
-}
-
-/**
- Issue command to set mouse's scaling.
-
- @param Scaling value of scaling
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseSetScaling (
- IN MOUSE_SF Scaling
- )
-{
- //
- // Send auxiliary command to set mouse scaling data
- //
- return Out8042AuxCommand (Scaling == Scaling1 ? SETSF1_CMD : SETSF2_CMD, FALSE);
-}
-
-/**
- Issue command to enable Ps2 mouse.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseEnable (
- VOID
- )
-{
- //
- // Send auxiliary command to enable mouse
- //
- return Out8042AuxCommand (ENABLE_CMD, FALSE);
-}
-
-/**
- Get mouse packet . Only care first 3 bytes
-
- @param MouseDev Pointer of PS2 Mouse Private Data Structure
-
- @retval EFI_NOT_READY Mouse Device not ready to input data packet, or some error happened during getting the packet
- @retval EFI_SUCCESS The data packet is gotten successfully.
-
-**/
-EFI_STATUS
-PS2MouseGetPacket (
- PS2_MOUSE_DEV *MouseDev
- )
-
-{
- EFI_STATUS Status;
- BOOLEAN KeyboardEnable;
- UINT8 Packet[PS2_PACKET_LENGTH];
- UINT8 Data;
- UINTN Count;
- UINTN State;
- INT16 RelativeMovementX;
- INT16 RelativeMovementY;
- BOOLEAN LButton;
- BOOLEAN RButton;
-
- KeyboardEnable = FALSE;
- State = PS2_READ_BYTE_ONE;
-
- //
- // State machine to get mouse packet
- //
- while (1) {
-
- switch (State) {
- case PS2_READ_BYTE_ONE:
- //
- // Read mouse first byte data, if failed, immediately return
- //
- KbcDisableAux ();
- Count = 1;
- Status = PS2MouseRead (&Data, &Count, State);
- if (EFI_ERROR (Status)) {
- KbcEnableAux ();
- return EFI_NOT_READY;
- }
-
- if (Count != 1) {
- KbcEnableAux ();
- return EFI_NOT_READY;
- }
-
- if (IS_PS2_SYNC_BYTE (Data)) {
- Packet[0] = Data;
- State = PS2_READ_DATA_BYTE;
-
- CheckKbStatus (&KeyboardEnable);
- KbcDisableKb ();
- KbcEnableAux ();
- }
- break;
-
- case PS2_READ_DATA_BYTE:
- Count = 2;
- Status = PS2MouseRead ((Packet + 1), &Count, State);
- if (EFI_ERROR (Status)) {
- if (KeyboardEnable) {
- KbcEnableKb ();
- }
-
- return EFI_NOT_READY;
- }
-
- if (Count != 2) {
- if (KeyboardEnable) {
- KbcEnableKb ();
- }
-
- return EFI_NOT_READY;
- }
-
- State = PS2_PROCESS_PACKET;
- break;
-
- case PS2_PROCESS_PACKET:
- if (KeyboardEnable) {
- KbcEnableKb ();
- }
- //
- // Decode the packet
- //
- RelativeMovementX = Packet[1];
- RelativeMovementY = Packet[2];
- //
- // Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0
- // Byte 0 | Y overflow | X overflow | Y sign bit | X sign bit | Always 1 | Middle Btn | Right Btn | Left Btn
- // Byte 1 | 8 bit X Movement
- // Byte 2 | 8 bit Y Movement
- //
- // X sign bit + 8 bit X Movement : 9-bit signed twos complement integer that presents the relative displacement of the device in the X direction since the last data transmission.
- // Y sign bit + 8 bit Y Movement : Same as X sign bit + 8 bit X Movement.
- //
- //
- // First, Clear X and Y high 8 bits
- //
- RelativeMovementX = (INT16) (RelativeMovementX & 0xFF);
- RelativeMovementY = (INT16) (RelativeMovementY & 0xFF);
- //
- // Second, if the 9-bit signed twos complement integer is negative, set the high 8 bit 0xff
- //
- if ((Packet[0] & 0x10) != 0) {
- RelativeMovementX = (INT16) (RelativeMovementX | 0xFF00);
- }
- if ((Packet[0] & 0x20) != 0) {
- RelativeMovementY = (INT16) (RelativeMovementY | 0xFF00);
- }
-
-
- RButton = (UINT8) (Packet[0] & 0x2);
- LButton = (UINT8) (Packet[0] & 0x1);
-
- //
- // Update mouse state
- //
- MouseDev->State.RelativeMovementX += RelativeMovementX;
- MouseDev->State.RelativeMovementY -= RelativeMovementY;
- MouseDev->State.RightButton = (UINT8) (RButton ? TRUE : FALSE);
- MouseDev->State.LeftButton = (UINT8) (LButton ? TRUE : FALSE);
- MouseDev->StateChanged = TRUE;
-
- return EFI_SUCCESS;
- }
- }
-}
-
-/**
- Read data via IsaIo protocol with given number.
-
- @param Buffer Buffer receive data of mouse
- @param BufSize The size of buffer
- @param State Check input or read data
-
- @return status of reading mouse data.
-**/
-EFI_STATUS
-PS2MouseRead (
- OUT UINT8 *Buffer,
- IN OUT UINTN *BufSize,
- IN UINTN State
- )
-{
- EFI_STATUS Status;
- UINTN BytesRead;
-
- Status = EFI_SUCCESS;
-
- if (State == PS2_READ_BYTE_ONE) {
- //
- // Check input for mouse
- //
- Status = CheckForInput ();
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- for (BytesRead = 0; BytesRead < *BufSize; BytesRead++) {
-
- Status = WaitOutputFull (TIMEOUT);
- if (EFI_ERROR (Status)) {
- break;
- }
- Buffer[BytesRead] = IoRead8 (KBC_DATA_PORT);
- }
- //
- // Verify the correct number of bytes read
- //
- if (BytesRead == 0 || BytesRead != *BufSize) {
- Status = EFI_NOT_FOUND;
- }
-
- *BufSize = BytesRead;
- return Status;
-}
-
-//
-// 8042 I/O function
-//
-/**
- I/O work flow of outing 8042 command.
-
- @param Command I/O command.
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042Command (
- IN UINT8 Command
- )
-{
- EFI_STATUS Status;
-
- //
- // Wait keyboard controller input buffer empty
- //
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Send command
- //
- IoWrite8 (KBC_CMD_STS_PORT, Command);
-
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- I/O work flow of outing 8042 data.
-
- @param Data Data value
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042Data (
- IN UINT8 Data
- )
-{
- EFI_STATUS Status;
- //
- // Wait keyboard controller input buffer empty
- //
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- IoWrite8 (KBC_DATA_PORT, Data);
- return WaitInputEmpty (TIMEOUT);
-}
-
-/**
- I/O work flow of in 8042 data.
-
- @param Data Data value
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-In8042Data (
- IN OUT UINT8 *Data
- )
-{
- UINTN Delay;
-
- Delay = TIMEOUT / 50;
-
- do {
- //
- // Check keyboard controller status bit 0(output buffer status)
- //
- if ((IoRead8 (KBC_CMD_STS_PORT) & KBC_OUTB) == KBC_OUTB) {
- break;
- }
-
- gBS->Stall (50);
- Delay--;
- } while (Delay != 0);
-
- if (Delay == 0) {
- return EFI_TIMEOUT;
- }
-
- *Data = IoRead8 (KBC_DATA_PORT);
-
- return EFI_SUCCESS;
-}
-
-/**
- I/O work flow of outing 8042 Aux command.
-
- @param Command Aux I/O command
- @param Resend Whether need resend the Aux command.
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042AuxCommand (
- IN UINT8 Command,
- IN BOOLEAN Resend
- )
-{
- EFI_STATUS Status;
- UINT8 Data;
-
- //
- // Wait keyboard controller input buffer empty
- //
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Send write to auxiliary device command
- //
- IoWrite8 (KBC_CMD_STS_PORT, WRITE_AUX_DEV);
-
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Send auxiliary device command
- //
- IoWrite8 (KBC_DATA_PORT, Command);
-
- //
- // Read return code
- //
- Status = In8042AuxData (&Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if (Data == PS2_ACK) {
- //
- // Receive mouse acknowledge, command send success
- //
- return EFI_SUCCESS;
-
- } else if (Resend) {
- //
- // Resend fail
- //
- return EFI_DEVICE_ERROR;
-
- } else if (Data == PS2_RESEND) {
- //
- // Resend command
- //
- Status = Out8042AuxCommand (Command, TRUE);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- } else {
- //
- // Invalid return code
- //
- return EFI_DEVICE_ERROR;
-
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- I/O work flow of outing 8042 Aux data.
-
- @param Data Buffer holding return value
-
- @retval EFI_SUCCESS Success to execute I/O work flow.
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042AuxData (
- IN UINT8 Data
- )
-{
- EFI_STATUS Status;
- //
- // Wait keyboard controller input buffer empty
- //
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Send write to auxiliary device command
- //
- IoWrite8 (KBC_CMD_STS_PORT, WRITE_AUX_DEV);
-
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- IoWrite8 (KBC_DATA_PORT, Data);
-
- Status = WaitInputEmpty (TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- I/O work flow of in 8042 Aux data.
-
- @param Data Buffer holding return value.
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-In8042AuxData (
- IN OUT UINT8 *Data
- )
-{
- EFI_STATUS Status;
-
- //
- // wait for output data
- //
- Status = WaitOutputFull (BAT_TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- *Data = IoRead8 (KBC_DATA_PORT);
-
- return EFI_SUCCESS;
-}
-
-
-/**
- Check keyboard controller status, if it is output buffer full and for auxiliary device.
-
- @retval EFI_SUCCESS Keyboard controller is ready
- @retval EFI_NOT_READY Keyboard controller is not ready
-**/
-EFI_STATUS
-CheckForInput (
- VOID
- )
-{
- UINT8 Data;
-
- Data = IoRead8 (KBC_CMD_STS_PORT);
-
- //
- // Check keyboard controller status, if it is output buffer full and for auxiliary device
- //
- if ((Data & (KBC_OUTB | KBC_AUXB)) != (KBC_OUTB | KBC_AUXB)) {
- return EFI_NOT_READY;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- I/O work flow to wait input buffer empty in given time.
-
- @param Timeout Wating time.
-
- @retval EFI_TIMEOUT if input is still not empty in given time.
- @retval EFI_SUCCESS input is empty.
-**/
-EFI_STATUS
-WaitInputEmpty (
- IN UINTN Timeout
- )
-{
- UINTN Delay;
- UINT8 Data;
-
- Delay = Timeout / 50;
-
- do {
- Data = IoRead8 (KBC_CMD_STS_PORT);
-
- //
- // Check keyboard controller status bit 1(input buffer status)
- //
- if ((Data & KBC_INPB) == 0) {
- break;
- }
-
- gBS->Stall (50);
- Delay--;
- } while (Delay != 0);
-
- if (Delay == 0) {
- return EFI_TIMEOUT;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- I/O work flow to wait output buffer full in given time.
-
- @param Timeout given time
-
- @retval EFI_TIMEOUT output is not full in given time
- @retval EFI_SUCCESS output is full in given time.
-**/
-EFI_STATUS
-WaitOutputFull (
- IN UINTN Timeout
- )
-{
- UINTN Delay;
- UINT8 Data;
-
- Delay = Timeout / 50;
-
- do {
- Data = IoRead8 (KBC_CMD_STS_PORT);
-
- //
- // Check keyboard controller status bit 0(output buffer status)
- // & bit5(output buffer for auxiliary device)
- //
- if ((Data & (KBC_OUTB | KBC_AUXB)) == (KBC_OUTB | KBC_AUXB)) {
- break;
- }
-
- gBS->Stall (50);
- Delay--;
- } while (Delay != 0);
-
- if (Delay == 0) {
- return EFI_TIMEOUT;
- }
-
- return EFI_SUCCESS;
-}
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.h b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.h deleted file mode 100644 index c854e68b29..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/CommPs2.h +++ /dev/null @@ -1,395 +0,0 @@ -/** @file
- PS2 Mouse Communication Interface
-
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _COMMPS2_H_
-#define _COMMPS2_H_
-
-#include "Ps2Mouse.h"
-
-#define PS2_PACKET_LENGTH 3
-#define PS2_SYNC_MASK 0xc
-#define PS2_SYNC_BYTE 0x8
-
-#define IS_PS2_SYNC_BYTE(byte) ((byte & PS2_SYNC_MASK) == PS2_SYNC_BYTE)
-
-#define PS2_READ_BYTE_ONE 0
-#define PS2_READ_DATA_BYTE 1
-#define PS2_PROCESS_PACKET 2
-
-#define TIMEOUT 50000
-#define BAT_TIMEOUT 500000
-
-//
-// 8042 I/O Port
-//
-#define KBC_DATA_PORT 0x60
-#define KBC_CMD_STS_PORT 0x64
-
-//
-// 8042 Command
-//
-#define READ_CMD_BYTE 0x20
-#define WRITE_CMD_BYTE 0x60
-#define DISABLE_AUX 0xa7
-#define ENABLE_AUX 0xa8
-#define SELF_TEST 0xaa
-#define DISABLE_KB 0xad
-#define ENABLE_KB 0xae
-#define WRITE_AUX_DEV 0xd4
-
-#define CMD_SYS_FLAG 0x04
-#define CMD_KB_STS 0x10
-#define CMD_KB_DIS 0x10
-#define CMD_KB_EN 0x0
-
-//
-// 8042 Auxiliary Device Command
-//
-#define SETSF1_CMD 0xe6
-#define SETSF2_CMD 0xe7
-#define SETRE_CMD 0xe8
-#define READ_CMD 0xeb
-#define SETRM_CMD 0xf0
-#define SETSR_CMD 0xf3
-#define ENABLE_CMD 0xf4
-#define DISABLE_CMD 0xf5
-#define RESET_CMD 0xff
-
-//
-// return code
-//
-#define PS2_ACK 0xfa
-#define PS2_RESEND 0xfe
-#define PS2MOUSE_BAT1 0xaa
-#define PS2MOUSE_BAT2 0x0
-
-//
-// Keyboard Controller Status
-//
-///
-/// Parity Error
-///
-#define KBC_PARE 0x80
-///
-/// General Time Out
-///
-#define KBC_TIM 0x40
-///
-/// Output buffer for auxiliary device (PS/2):
-/// 0 - Holds keyboard data
-/// 1 - Holds data for auxiliary device
-///
-#define KBC_AUXB 0x20
-///
-/// Keyboard lock status:
-/// 0 - keyboard locked
-/// 1 - keyboard free
-///
-#define KBC_KEYL 0x10
-///
-/// Command/Data:
-/// 0 - data byte written via port 60h
-/// 1 - command byte written via port 64h
-///
-#define KBC_CD 0x08
-///
-/// System Flag:
-/// 0 - power-on reset
-/// 1 - self-test successful
-///
-#define KBC_SYSF 0x04
-///
-/// Input Buffer Status :
-/// 0 - input buffer empty
-/// 1 - CPU data in input buffer
-///
-#define KBC_INPB 0x02
-///
-/// Output Buffer Status :
-/// 0 - output buffer empty
-/// 1 - keyboard controller data in output buffer
-///
-#define KBC_OUTB 0x01
-
-/**
- Issue self test command via IsaIo interface.
-
- @return EFI_SUCCESS Success to do keyboard self testing.
- @return others Fail to do keyboard self testing.
-**/
-EFI_STATUS
-KbcSelfTest (
- VOID
- );
-
-/**
- Issue command to enable keyboard AUX functionality.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcEnableAux (
- VOID
- );
-
-/**
- Issue command to disable keyboard AUX functionality.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcDisableAux (
- VOID
- );
-
-/**
- Issue command to enable keyboard.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcEnableKb (
- VOID
- );
-
-/**
- Issue command to disable keyboard.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-KbcDisableKb (
- VOID
- );
-
-/**
- Issue command to check keyboard status.
-
- @param KeyboardEnable return whether keyboard is enable.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-CheckKbStatus (
- OUT BOOLEAN *KeyboardEnable
- );
-
-/**
- Issue command to reset keyboard.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseReset (
- VOID
- );
-
-/**
- Issue command to set mouse's sample rate
-
- @param SampleRate value of sample rate
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseSetSampleRate (
- IN MOUSE_SR SampleRate
- );
-
-/**
- Issue command to set mouse's resolution.
-
- @param Resolution value of resolution
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseSetResolution (
- IN MOUSE_RE Resolution
- );
-
-/**
- Issue command to set mouse's scaling.
-
- @param Scaling value of scaling
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseSetScaling (
- IN MOUSE_SF Scaling
- );
-
-/**
- Issue command to enable Ps2 mouse.
-
- @return Status of command issuing.
-**/
-EFI_STATUS
-PS2MouseEnable (
- VOID
- );
-
-/**
- Get mouse packet . Only care first 3 bytes
-
- @param MouseDev Pointer of PS2 Mouse Private Data Structure
-
- @retval EFI_NOT_READY Mouse Device not ready to input data packet, or some error happened during getting the packet
- @retval EFI_SUCCESS The data packet is gotten successfully.
-
-**/
-EFI_STATUS
-PS2MouseGetPacket (
- PS2_MOUSE_DEV *MouseDev
- );
-
-/**
- Read data via IsaIo protocol with given number.
-
- @param Buffer Buffer receive data of mouse
- @param BufSize The size of buffer
- @param State Check input or read data
-
- @return status of reading mouse data.
-**/
-EFI_STATUS
-PS2MouseRead (
- OUT UINT8 *Buffer,
- IN OUT UINTN *BufSize,
- IN UINTN State
- );
-
-//
-// 8042 I/O function
-//
-/**
- I/O work flow of outing 8042 command.
-
- @param Command I/O command.
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042Command (
- IN UINT8 Command
- );
-
-/**
- I/O work flow of in 8042 data.
-
- @param Data Data value
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-In8042Data (
- IN OUT UINT8 *Data
- );
-
-/**
- I/O work flow of outing 8042 data.
-
- @param Data Data value
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042Data (
- IN UINT8 Data
- );
-
-/**
- I/O work flow of outing 8042 Aux command.
-
- @param Command Aux I/O command
- @param Resend Whether need resend the Aux command.
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042AuxCommand (
- IN UINT8 Command,
- IN BOOLEAN Resend
- );
-
-/**
- I/O work flow of in 8042 Aux data.
-
- @param Data Buffer holding return value.
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-In8042AuxData (
- IN OUT UINT8 *Data
- );
-
-/**
- I/O work flow of outing 8042 Aux data.
-
- @param Data Buffer holding return value
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-Out8042AuxData (
- IN UINT8 Data
- );
-
-/**
- Check keyboard controller status, if it is output buffer full and for auxiliary device.
-
- @retval EFI_SUCCESS Keyboard controller is ready
- @retval EFI_NOT_READY Keyboard controller is not ready
-**/
-EFI_STATUS
-CheckForInput (
- VOID
- );
-
-/**
- I/O work flow to wait input buffer empty in given time.
-
- @param Timeout Wating time.
-
- @retval EFI_TIMEOUT if input is still not empty in given time.
- @retval EFI_SUCCESS input is empty.
-**/
-EFI_STATUS
-WaitInputEmpty (
- IN UINTN Timeout
- );
-
-/**
- I/O work flow to wait output buffer full in given time.
-
- @param Timeout given time
-
- @retval EFI_TIMEOUT output is not full in given time
- @retval EFI_SUCCESS output is full in given time.
-**/
-EFI_STATUS
-WaitOutputFull (
- IN UINTN Timeout
- );
-
-#endif
-
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/ComponentName.c b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/ComponentName.c deleted file mode 100644 index 962480265b..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/ComponentName.c +++ /dev/null @@ -1,223 +0,0 @@ -/** @file
- UEFI Component Name(2) protocol implementation for Ps2MouseDxe driver.
-
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "Ps2Mouse.h"
-
-//
-// EFI Component Name Protocol
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gPs2MouseComponentName = {
- Ps2MouseComponentNameGetDriverName,
- Ps2MouseComponentNameGetControllerName,
- "eng"
-};
-
-//
-// EFI Component Name 2 Protocol
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gPs2MouseComponentName2 = {
- (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) Ps2MouseComponentNameGetDriverName,
- (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) Ps2MouseComponentNameGetControllerName,
- "en"
-};
-
-
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mPs2MouseDriverNameTable[] = {
- {
- "eng;en",
- L"PS/2 Mouse Driver"
- },
- {
- NULL,
- NULL
- }
-};
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-Ps2MouseComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- )
-{
- return LookupUnicodeString2 (
- Language,
- This->SupportedLanguages,
- mPs2MouseDriverNameTable,
- DriverName,
- (BOOLEAN)(This == &gPs2MouseComponentName)
- );
-}
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-Ps2MouseComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- )
-{
- EFI_STATUS Status;
- EFI_SIMPLE_POINTER_PROTOCOL *SimplePointerProtocol;
- PS2_MOUSE_DEV *MouseDev;
-
- //
- // This is a device driver, so ChildHandle must be NULL.
- //
- if (ChildHandle != NULL) {
- return EFI_UNSUPPORTED;
- }
- //
- // Check Controller's handle
- //
- Status = EfiTestManagedDevice (ControllerHandle, gPS2MouseDriver.DriverBindingHandle, &gEfiSioProtocolGuid);
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Get the device context
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiSimplePointerProtocolGuid,
- (VOID **) &SimplePointerProtocol,
- gPS2MouseDriver.DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- MouseDev = PS2_MOUSE_DEV_FROM_THIS (SimplePointerProtocol);
-
- return LookupUnicodeString2 (
- Language,
- This->SupportedLanguages,
- MouseDev->ControllerNameTable,
- ControllerName,
- (BOOLEAN)(This == &gPs2MouseComponentName)
- );
-}
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.c b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.c deleted file mode 100644 index 1586935cde..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.c +++ /dev/null @@ -1,805 +0,0 @@ -/** @file
- PS/2 Mouse driver. Routines that interacts with callers,
- conforming to EFI driver model.
-
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "Ps2Mouse.h"
-#include "CommPs2.h"
-
-///
-/// DriverBinding Protocol Instance
-///
-EFI_DRIVER_BINDING_PROTOCOL gPS2MouseDriver = {
- PS2MouseDriverSupported,
- PS2MouseDriverStart,
- PS2MouseDriverStop,
- 0xa,
- NULL,
- NULL
-};
-
-/**
- Test to see if this driver supports ControllerHandle. Any ControllerHandle
- than contains a IsaIo protocol can be supported.
-
- @param This Protocol instance pointer.
- @param ControllerHandle Handle of device to test
- @param RemainingDevicePath Optional parameter use to pick a specific child
- device to start.
-
- @retval EFI_SUCCESS This driver supports this device
- @retval EFI_ALREADY_STARTED This driver is already running on this device
- @retval other This driver does not support this device
-
-**/
-EFI_STATUS
-EFIAPI
-PS2MouseDriverSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_SIO_PROTOCOL *Sio;
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- ACPI_HID_DEVICE_PATH *Acpi;
-
- //
- // Check whether the controller is keyboard.
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- (VOID **) &DevicePath,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- do {
- Acpi = (ACPI_HID_DEVICE_PATH *) DevicePath;
- DevicePath = NextDevicePathNode (DevicePath);
- } while (!IsDevicePathEnd (DevicePath));
-
- if (DevicePathType (Acpi) != ACPI_DEVICE_PATH ||
- (DevicePathSubType (Acpi) != ACPI_DP && DevicePathSubType (Acpi) != ACPI_EXTENDED_DP)) {
- return EFI_UNSUPPORTED;
- }
-
- switch (Acpi->HID) {
- case EISA_PNP_ID (0xF03):
- //
- // Microsoft PS/2 style mouse
- //
- case EISA_PNP_ID (0xF13):
- //
- // PS/2 Port for PS/2-style Mice
- //
- break;
-
- case EISA_PNP_ID (0x303):
- //
- // IBM Enhanced (101/102-key, PS/2 mouse support)
- //
- if (Acpi->UID == 1) {
- break;
- }
-
- default:
- return EFI_UNSUPPORTED;
- break;
- }
-
- //
- // Open the IO Abstraction(s) needed to perform the supported test
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiSioProtocolGuid,
- (VOID **) &Sio,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Close the I/O Abstraction(s) used to perform the supported test
- //
- gBS->CloseProtocol (
- Controller,
- &gEfiSioProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- return Status;
-}
-
-/**
- Start this driver on ControllerHandle by opening a Sio protocol, creating
- PS2_MOUSE_DEV device and install gEfiSimplePointerProtocolGuid finally.
-
- @param This Protocol instance pointer.
- @param ControllerHandle Handle of device to bind driver to
- @param RemainingDevicePath Optional parameter use to pick a specific child
- device to start.
-
- @retval EFI_SUCCESS This driver is added to ControllerHandle
- @retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle
- @retval other This driver does not support this device
-
-**/
-EFI_STATUS
-EFIAPI
-PS2MouseDriverStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_STATUS EmptyStatus;
- EFI_SIO_PROTOCOL *Sio;
- PS2_MOUSE_DEV *MouseDev;
- UINT8 Data;
- EFI_TPL OldTpl;
- EFI_STATUS_CODE_VALUE StatusCode;
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
-
- StatusCode = 0;
-
- //
- // Open the device path protocol
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- (VOID **) &DevicePath,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Report that the keyboard is being enabled
- //
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_PROGRESS_CODE,
- EFI_PERIPHERAL_MOUSE | EFI_P_PC_ENABLE,
- DevicePath
- );
-
- //
- // Get the ISA I/O Protocol on Controller's handle
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiSioProtocolGuid,
- (VOID **) &Sio,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Raise TPL to avoid keyboard operation impact
- //
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
-
- //
- // Allocate private data
- //
- MouseDev = AllocateZeroPool (sizeof (PS2_MOUSE_DEV));
- if (MouseDev == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto ErrorExit;
- }
- //
- // Setup the device instance
- //
- MouseDev->Signature = PS2_MOUSE_DEV_SIGNATURE;
- MouseDev->Handle = Controller;
- MouseDev->SampleRate = SampleRate20;
- MouseDev->Resolution = MouseResolution4;
- MouseDev->Scaling = Scaling1;
- MouseDev->DataPackageSize = 3;
- MouseDev->DevicePath = DevicePath;
-
- //
- // Resolution = 4 counts/mm
- //
- MouseDev->Mode.ResolutionX = 4;
- MouseDev->Mode.ResolutionY = 4;
- MouseDev->Mode.LeftButton = TRUE;
- MouseDev->Mode.RightButton = TRUE;
-
- MouseDev->SimplePointerProtocol.Reset = MouseReset;
- MouseDev->SimplePointerProtocol.GetState = MouseGetState;
- MouseDev->SimplePointerProtocol.Mode = &(MouseDev->Mode);
-
- //
- // Initialize keyboard controller if necessary
- //
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_PROGRESS_CODE,
- EFI_PERIPHERAL_MOUSE | EFI_P_MOUSE_PC_SELF_TEST,
- DevicePath
- );
-
- Data = IoRead8 (KBC_CMD_STS_PORT);
- //
- // Fix for random hangs in System waiting for the Key if no KBC is present in BIOS.
- //
- if ((Data & (KBC_PARE | KBC_TIM)) == (KBC_PARE | KBC_TIM)) {
- //
- // If nobody decodes KBC I/O port, it will read back as 0xFF.
- // Check the Time-Out and Parity bit to see if it has an active KBC in system
- //
- Status = EFI_DEVICE_ERROR;
- StatusCode = EFI_PERIPHERAL_MOUSE | EFI_P_EC_NOT_DETECTED;
- goto ErrorExit;
- }
-
- if ((Data & KBC_SYSF) != KBC_SYSF) {
- Status = KbcSelfTest ();
- if (EFI_ERROR (Status)) {
- StatusCode = EFI_PERIPHERAL_MOUSE | EFI_P_EC_CONTROLLER_ERROR;
- goto ErrorExit;
- }
- }
-
- KbcEnableAux ();
-
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_PROGRESS_CODE,
- EFI_PERIPHERAL_MOUSE | EFI_P_PC_PRESENCE_DETECT,
- DevicePath
- );
-
- //
- // Reset the mouse
- //
- Status = MouseDev->SimplePointerProtocol.Reset (
- &MouseDev->SimplePointerProtocol,
- FeaturePcdGet (PcdPs2MouseExtendedVerification)
- );
- if (EFI_ERROR (Status)) {
- //
- // mouse not connected
- //
- Status = EFI_SUCCESS;
- StatusCode = EFI_PERIPHERAL_MOUSE | EFI_P_EC_NOT_DETECTED;
- goto ErrorExit;
- }
-
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_PROGRESS_CODE,
- EFI_PERIPHERAL_MOUSE | EFI_P_PC_DETECTED,
- DevicePath
- );
-
- //
- // Setup the WaitForKey event
- //
- Status = gBS->CreateEvent (
- EVT_NOTIFY_WAIT,
- TPL_NOTIFY,
- MouseWaitForInput,
- MouseDev,
- &((MouseDev->SimplePointerProtocol).WaitForInput)
- );
- if (EFI_ERROR (Status)) {
- Status = EFI_OUT_OF_RESOURCES;
- goto ErrorExit;
- }
- //
- // Setup a periodic timer, used to poll mouse state
- //
- Status = gBS->CreateEvent (
- EVT_TIMER | EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- PollMouse,
- MouseDev,
- &MouseDev->TimerEvent
- );
- if (EFI_ERROR (Status)) {
- Status = EFI_OUT_OF_RESOURCES;
- goto ErrorExit;
- }
- //
- // Start timer to poll mouse (100 samples per second)
- //
- Status = gBS->SetTimer (MouseDev->TimerEvent, TimerPeriodic, 100000);
- if (EFI_ERROR (Status)) {
- Status = EFI_OUT_OF_RESOURCES;
- goto ErrorExit;
- }
-
- MouseDev->ControllerNameTable = NULL;
- AddUnicodeString2 (
- "eng",
- gPs2MouseComponentName.SupportedLanguages,
- &MouseDev->ControllerNameTable,
- L"PS/2 Mouse Device",
- TRUE
- );
- AddUnicodeString2 (
- "en",
- gPs2MouseComponentName2.SupportedLanguages,
- &MouseDev->ControllerNameTable,
- L"PS/2 Mouse Device",
- FALSE
- );
-
-
- //
- // Install protocol interfaces for the mouse device.
- //
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Controller,
- &gEfiSimplePointerProtocolGuid,
- &MouseDev->SimplePointerProtocol,
- NULL
- );
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- gBS->RestoreTPL (OldTpl);
-
- return Status;
-
-ErrorExit:
-
- if (Status != EFI_DEVICE_ERROR) {
- KbcDisableAux ();
- }
-
- if (StatusCode != 0) {
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- StatusCode,
- DevicePath
- );
- }
-
- if ((MouseDev != NULL) && (MouseDev->SimplePointerProtocol.WaitForInput != NULL)) {
- gBS->CloseEvent (MouseDev->SimplePointerProtocol.WaitForInput);
- }
-
- if ((MouseDev != NULL) && (MouseDev->TimerEvent != NULL)) {
- gBS->CloseEvent (MouseDev->TimerEvent);
- }
-
- if ((MouseDev != NULL) && (MouseDev->ControllerNameTable != NULL)) {
- FreeUnicodeStringTable (MouseDev->ControllerNameTable);
- }
-
- if (Status != EFI_DEVICE_ERROR) {
- //
- // Since there will be no timer handler for mouse input any more,
- // exhaust input data just in case there is still mouse data left
- //
- EmptyStatus = EFI_SUCCESS;
- while (!EFI_ERROR (EmptyStatus)) {
- EmptyStatus = In8042Data (&Data);
- }
- }
-
- if (MouseDev != NULL) {
- FreePool (MouseDev);
- }
-
- gBS->CloseProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- gBS->CloseProtocol (
- Controller,
- &gEfiSioProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- gBS->RestoreTPL (OldTpl);
-
- return Status;
-}
-
-/**
- Stop this driver on ControllerHandle. Support stopping any child handles
- created by this driver.
-
- @param This Protocol instance pointer.
- @param ControllerHandle Handle of device to stop driver on
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
- children is zero stop the entire bus driver.
- @param ChildHandleBuffer List of Child Handles to Stop.
-
- @retval EFI_SUCCESS This driver is removed ControllerHandle
- @retval other This driver was not removed from this device
-
-**/
-EFI_STATUS
-EFIAPI
-PS2MouseDriverStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-{
- EFI_STATUS Status;
- EFI_SIMPLE_POINTER_PROTOCOL *SimplePointerProtocol;
- PS2_MOUSE_DEV *MouseDev;
- UINT8 Data;
-
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiSimplePointerProtocolGuid,
- (VOID **) &SimplePointerProtocol,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return EFI_SUCCESS;
- }
-
- MouseDev = PS2_MOUSE_DEV_FROM_THIS (SimplePointerProtocol);
-
- //
- // Report that the keyboard is being disabled
- //
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_PROGRESS_CODE,
- EFI_PERIPHERAL_MOUSE | EFI_P_PC_DISABLE,
- MouseDev->DevicePath
- );
-
- Status = gBS->UninstallProtocolInterface (
- Controller,
- &gEfiSimplePointerProtocolGuid,
- &MouseDev->SimplePointerProtocol
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Cancel mouse data polling timer, close timer event
- //
- gBS->SetTimer (MouseDev->TimerEvent, TimerCancel, 0);
- gBS->CloseEvent (MouseDev->TimerEvent);
-
- //
- // Since there will be no timer handler for mouse input any more,
- // exhaust input data just in case there is still mouse data left
- //
- Status = EFI_SUCCESS;
- while (!EFI_ERROR (Status)) {
- Status = In8042Data (&Data);
- }
-
- gBS->CloseEvent (MouseDev->SimplePointerProtocol.WaitForInput);
- FreeUnicodeStringTable (MouseDev->ControllerNameTable);
- FreePool (MouseDev);
-
- gBS->CloseProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- gBS->CloseProtocol (
- Controller,
- &gEfiSioProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- return EFI_SUCCESS;
-}
-
-/**
- Reset the Mouse and do BAT test for it, if ExtendedVerification is TRUE and
- there is a mouse device connected to system.
-
- @param This - Pointer of simple pointer Protocol.
- @param ExtendedVerification - Whether configure mouse parameters. True: do; FALSE: skip.
-
-
- @retval EFI_SUCCESS - The command byte is written successfully.
- @retval EFI_DEVICE_ERROR - Errors occurred during resetting keyboard.
-
-**/
-EFI_STATUS
-EFIAPI
-MouseReset (
- IN EFI_SIMPLE_POINTER_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-{
- EFI_STATUS Status;
- PS2_MOUSE_DEV *MouseDev;
- EFI_TPL OldTpl;
- BOOLEAN KeyboardEnable;
- UINT8 Data;
-
- MouseDev = PS2_MOUSE_DEV_FROM_THIS (This);
-
- //
- // Report reset progress code
- //
- REPORT_STATUS_CODE_WITH_DEVICE_PATH (
- EFI_PROGRESS_CODE,
- EFI_PERIPHERAL_MOUSE | EFI_P_PC_RESET,
- MouseDev->DevicePath
- );
-
- KeyboardEnable = FALSE;
-
- //
- // Raise TPL to avoid keyboard operation impact
- //
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
-
- ZeroMem (&MouseDev->State, sizeof (EFI_SIMPLE_POINTER_STATE));
- MouseDev->StateChanged = FALSE;
-
- //
- // Exhaust input data
- //
- Status = EFI_SUCCESS;
- while (!EFI_ERROR (Status)) {
- Status = In8042Data (&Data);
- }
-
- CheckKbStatus (&KeyboardEnable);
-
- KbcDisableKb ();
-
- //
- // if there's data block on KBC data port, read it out
- //
- if ((IoRead8 (KBC_CMD_STS_PORT) & KBC_OUTB) == KBC_OUTB) {
- IoRead8 (KBC_DATA_PORT);
- }
-
- Status = EFI_SUCCESS;
- //
- // The PS2 mouse driver reset behavior is always successfully return no matter wheater or not there is mouse connected to system.
- // This behavior is needed by performance speed. The following mouse command only succeessfully finish when mouse device is
- // connected to system, so if PS2 mouse device not connect to system or user not ask for, we skip the mouse configuration and enabling
- //
- if (ExtendedVerification && CheckMouseConnect (MouseDev)) {
- //
- // Send mouse reset command and set mouse default configure
- //
- Status = PS2MouseReset ();
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Status = PS2MouseSetSampleRate (MouseDev->SampleRate);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Status = PS2MouseSetResolution (MouseDev->Resolution);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Status = PS2MouseSetScaling (MouseDev->Scaling);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Status = PS2MouseEnable ();
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
- }
-Exit:
- gBS->RestoreTPL (OldTpl);
-
- if (KeyboardEnable) {
- KbcEnableKb ();
- }
-
- return Status;
-}
-
-/**
- Check whether there is Ps/2 mouse device in system
-
- @param MouseDev - Mouse Private Data Structure
-
- @retval TRUE - Keyboard in System.
- @retval FALSE - Keyboard not in System.
-
-**/
-BOOLEAN
-CheckMouseConnect (
- IN PS2_MOUSE_DEV *MouseDev
- )
-
-{
- EFI_STATUS Status;
-
- Status = PS2MouseEnable ();
- if (!EFI_ERROR (Status)) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Get and Clear mouse status.
-
- @param This - Pointer of simple pointer Protocol.
- @param State - Output buffer holding status.
-
- @retval EFI_INVALID_PARAMETER Output buffer is invalid.
- @retval EFI_NOT_READY Mouse is not changed status yet.
- @retval EFI_SUCCESS Mouse status is changed and get successful.
-**/
-EFI_STATUS
-EFIAPI
-MouseGetState (
- IN EFI_SIMPLE_POINTER_PROTOCOL *This,
- IN OUT EFI_SIMPLE_POINTER_STATE *State
- )
-{
- PS2_MOUSE_DEV *MouseDev;
- EFI_TPL OldTpl;
-
- MouseDev = PS2_MOUSE_DEV_FROM_THIS (This);
-
- if (State == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (!MouseDev->StateChanged) {
- return EFI_NOT_READY;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- CopyMem (State, &(MouseDev->State), sizeof (EFI_SIMPLE_POINTER_STATE));
-
- //
- // clear mouse state
- //
- MouseDev->State.RelativeMovementX = 0;
- MouseDev->State.RelativeMovementY = 0;
- MouseDev->State.RelativeMovementZ = 0;
- MouseDev->StateChanged = FALSE;
- gBS->RestoreTPL (OldTpl);
-
- return EFI_SUCCESS;
-}
-
-/**
-
- Event notification function for SIMPLE_POINTER.WaitForInput event.
- Signal the event if there is input from mouse.
-
- @param Event event object
- @param Context event context
-
-**/
-VOID
-EFIAPI
-MouseWaitForInput (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- PS2_MOUSE_DEV *MouseDev;
-
- MouseDev = (PS2_MOUSE_DEV *) Context;
-
- //
- // Someone is waiting on the mouse event, if there's
- // input from mouse, signal the event
- //
- if (MouseDev->StateChanged) {
- gBS->SignalEvent (Event);
- }
-
-}
-
-/**
- Event notification function for TimerEvent event.
- If mouse device is connected to system, try to get the mouse packet data.
-
- @param Event - TimerEvent in PS2_MOUSE_DEV
- @param Context - Pointer to PS2_MOUSE_DEV structure
-
-**/
-VOID
-EFIAPI
-PollMouse (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-
-{
- PS2_MOUSE_DEV *MouseDev;
-
- MouseDev = (PS2_MOUSE_DEV *) Context;
-
- //
- // Polling mouse packet data
- //
- PS2MouseGetPacket (MouseDev);
-}
-
-/**
- The user Entry Point for module Ps2Mouse. The user code starts with this function.
-
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
- @param[in] SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS The entry point is executed successfully.
- @retval other Some error occurs when executing this entry point.
-
-**/
-EFI_STATUS
-EFIAPI
-InitializePs2Mouse(
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
-
- //
- // Install driver model protocol(s).
- //
- Status = EfiLibInstallDriverBindingComponentName2 (
- ImageHandle,
- SystemTable,
- &gPS2MouseDriver,
- ImageHandle,
- &gPs2MouseComponentName,
- &gPs2MouseComponentName2
- );
- ASSERT_EFI_ERROR (Status);
-
-
- return Status;
-}
-
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.h b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.h deleted file mode 100644 index 9e62f740fe..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2Mouse.h +++ /dev/null @@ -1,399 +0,0 @@ -/** @file
- PS/2 Mouse driver header file.
-
-Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _PS2MOUSE_H_
-#define _PS2MOUSE_H_
-
-#include <Uefi.h>
-
-#include <Protocol/SimplePointer.h>
-#include <Protocol/SuperIo.h>
-#include <Protocol/DevicePath.h>
-
-#include <Library/DevicePathLib.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiDriverEntryPoint.h>
-#include <Library/UefiLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/ReportStatusCodeLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-
-//
-// Global Variables
-//
-extern EFI_DRIVER_BINDING_PROTOCOL gPS2MouseDriver;
-extern EFI_COMPONENT_NAME_PROTOCOL gPs2MouseComponentName;
-extern EFI_COMPONENT_NAME2_PROTOCOL gPs2MouseComponentName2;
-
-//
-// PS/2 mouse sample rate
-//
-typedef enum {
- SampleRate10,
- SampleRate20,
- SampleRate40,
- SampleRate60,
- SampleRate80,
- SampleRate100,
- SampleRate200,
- MaxSampleRate
-} MOUSE_SR;
-
-//
-// PS/2 mouse resolution
-//
-typedef enum {
- MouseResolution1,
- MouseResolution2,
- MouseResolution4,
- MouseResolution8,
- MaxResolution
-} MOUSE_RE;
-
-//
-// PS/2 mouse scaling
-//
-typedef enum {
- Scaling1,
- Scaling2
-} MOUSE_SF;
-
-//
-// Driver Private Data
-//
-#define PS2_MOUSE_DEV_SIGNATURE SIGNATURE_32 ('p', 's', '2', 'm')
-
-typedef struct {
- UINTN Signature;
-
- EFI_HANDLE Handle;
- EFI_SIMPLE_POINTER_PROTOCOL SimplePointerProtocol;
- EFI_SIMPLE_POINTER_STATE State;
- EFI_SIMPLE_POINTER_MODE Mode;
- BOOLEAN StateChanged;
-
- //
- // PS2 Mouse device specific information
- //
- MOUSE_SR SampleRate;
- MOUSE_RE Resolution;
- MOUSE_SF Scaling;
- UINT8 DataPackageSize;
-
- EFI_EVENT TimerEvent;
-
- EFI_UNICODE_STRING_TABLE *ControllerNameTable;
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
-} PS2_MOUSE_DEV;
-
-#define PS2_MOUSE_DEV_FROM_THIS(a) CR (a, PS2_MOUSE_DEV, SimplePointerProtocol, PS2_MOUSE_DEV_SIGNATURE)
-
-//
-// Function prototypes
-//
-/**
- Test to see if this driver supports ControllerHandle. Any ControllerHandle
- than contains a IsaIo protocol can be supported.
-
- @param This Protocol instance pointer.
- @param ControllerHandle Handle of device to test
- @param RemainingDevicePath Optional parameter use to pick a specific child
- device to start.
-
- @retval EFI_SUCCESS This driver supports this device
- @retval EFI_ALREADY_STARTED This driver is already running on this device
- @retval other This driver does not support this device
-
-**/
-EFI_STATUS
-EFIAPI
-PS2MouseDriverSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-/**
- Start this driver on ControllerHandle by opening a IsaIo
- protocol, creating PS2_MOUSE_ABSOLUTE_POINTER_DEV device and install gEfiAbsolutePointerProtocolGuid
- finnally.
-
- @param This Protocol instance pointer.
- @param ControllerHandle Handle of device to bind driver to
- @param RemainingDevicePath Optional parameter use to pick a specific child
- device to start.
-
- @retval EFI_SUCCESS This driver is added to ControllerHandle
- @retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle
- @retval other This driver does not support this device
-
-**/
-EFI_STATUS
-EFIAPI
-PS2MouseDriverStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-/**
- Stop this driver on ControllerHandle. Support stopping any child handles
- created by this driver.
-
- @param This Protocol instance pointer.
- @param ControllerHandle Handle of device to stop driver on
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
- children is zero stop the entire bus driver.
- @param ChildHandleBuffer List of Child Handles to Stop.
-
- @retval EFI_SUCCESS This driver is removed ControllerHandle
- @retval other This driver was not removed from this device
-
-**/
-EFI_STATUS
-EFIAPI
-PS2MouseDriverStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- );
-
-//
-// EFI Component Name Functions
-//
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-Ps2MouseComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- );
-
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-Ps2MouseComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- );
-
-/**
- Reset the Mouse and do BAT test for it, if ExtendedVerification is TRUE and
- there is a mouse device connected to system.
-
- @param This - Pointer of simple pointer Protocol.
- @param ExtendedVerification - Whether configure mouse parameters. True: do; FALSE: skip.
-
-
- @retval EFI_SUCCESS - The command byte is written successfully.
- @retval EFI_DEVICE_ERROR - Errors occurred during resetting keyboard.
-
-**/
-EFI_STATUS
-EFIAPI
-MouseReset (
- IN EFI_SIMPLE_POINTER_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- );
-
-/**
- Get and Clear mouse status.
-
- @param This - Pointer of simple pointer Protocol.
- @param State - Output buffer holding status.
-
- @retval EFI_INVALID_PARAMETER Output buffer is invalid.
- @retval EFI_NOT_READY Mouse is not changed status yet.
- @retval EFI_SUCCESS Mouse status is changed and get successful.
-**/
-EFI_STATUS
-EFIAPI
-MouseGetState (
- IN EFI_SIMPLE_POINTER_PROTOCOL *This,
- IN OUT EFI_SIMPLE_POINTER_STATE *State
- );
-
-/**
-
- Event notification function for SIMPLE_POINTER.WaitForInput event.
- Signal the event if there is input from mouse.
-
- @param Event event object
- @param Context event context
-
-**/
-VOID
-EFIAPI
-MouseWaitForInput (
- IN EFI_EVENT Event,
- IN VOID *Context
- );
-
-/**
- Event notification function for TimerEvent event.
- If mouse device is connected to system, try to get the mouse packet data.
-
- @param Event - TimerEvent in PS2_MOUSE_DEV
- @param Context - Pointer to PS2_MOUSE_DEV structure
-
-**/
-VOID
-EFIAPI
-PollMouse (
- IN EFI_EVENT Event,
- IN VOID *Context
- );
-
-/**
- I/O work flow of in 8042 data.
-
- @param Data Data value
-
- @retval EFI_SUCCESS Success to execute I/O work flow
- @retval EFI_TIMEOUT Keyboard controller time out.
-**/
-EFI_STATUS
-In8042Data (
- IN OUT UINT8 *Data
- );
-
-/**
- Check whether there is Ps/2 mouse device in system
-
- @param MouseDev - Mouse Private Data Structure
-
- @retval TRUE - Keyboard in System.
- @retval FALSE - Keyboard not in System.
-
-**/
-BOOLEAN
-CheckMouseConnect (
- IN PS2_MOUSE_DEV *MouseDev
- );
-
-#endif
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.inf b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.inf deleted file mode 100644 index 2c7688a051..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.inf +++ /dev/null @@ -1,76 +0,0 @@ -## @file
-# PS2 Mouse Driver.
-#
-# This dirver provides support for PS2 based mice.
-#
-# Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = Ps2MouseDxe
- MODULE_UNI_FILE = Ps2MouseDxe.uni
- FILE_GUID = 08464531-4C99-4C4C-A887-8D8BA4BBB063
- MODULE_TYPE = UEFI_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = InitializePs2Mouse
-
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-# DRIVER_BINDING = gPS2MouseDriver;
-# COMPONENT_NAME = gPs2MouseComponentName;
-# COMPONENT_NAME2 = gPs2MouseComponentName2;
-#
-
-[Sources]
- ComponentName.c
- CommPs2.h
- CommPs2.c
- Ps2Mouse.h
- Ps2Mouse.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
-
-[LibraryClasses]
- ReportStatusCodeLib
- UefiBootServicesTableLib
- MemoryAllocationLib
- BaseMemoryLib
- UefiLib
- UefiDriverEntryPoint
- DebugLib
- PcdLib
- IoLib
- DevicePathLib
-
-[Protocols]
- gEfiSioProtocolGuid ## TO_START
- gEfiSimplePointerProtocolGuid ## BY_START
- gEfiDevicePathProtocolGuid ## TO_START
-
-[FeaturePcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification ## CONSUMES
-
-#
-# [Event]
-#
-# ##
-# # Timer event used to check the mouse state at a regular interval.
-# #
-# EVENT_TYPE_PERIODIC_TIMER ## CONSUMES
-#
-
-[UserExtensions.TianoCore."ExtraFiles"]
- Ps2MouseDxeExtra.uni
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.uni b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.uni deleted file mode 100644 index 417474411d..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxe.uni +++ /dev/null @@ -1,22 +0,0 @@ -// /** @file
-// PS2 Mouse Driver.
-//
-// This dirver provides support for PS2 based mice.
-//
-// Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
-//
-// This program and the accompanying materials
-// are licensed and made available under the terms and conditions of the BSD License
-// which accompanies this distribution. The full text of the license may be found at
-// http://opensource.org/licenses/bsd-license.php
-//
-// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//
-// **/
-
-
-#string STR_MODULE_ABSTRACT #language en-US "PS2 Mouse Driver"
-
-#string STR_MODULE_DESCRIPTION #language en-US "This driver provides support for PS2-based mice."
-
diff --git a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxeExtra.uni b/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxeExtra.uni deleted file mode 100644 index fee64d8d18..0000000000 --- a/MdeModulePkg/Bus/Isa/Ps2MouseDxe/Ps2MouseDxeExtra.uni +++ /dev/null @@ -1,20 +0,0 @@ -// /** @file
-// Ps2MouseDxe Localized Strings and Content
-//
-// Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
-//
-// This program and the accompanying materials
-// are licensed and made available under the terms and conditions of the BSD License
-// which accompanies this distribution. The full text of the license may be found at
-// http://opensource.org/licenses/bsd-license.php
-//
-// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//
-// **/
-
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
-"PS2 Mouse DXE Driver"
-
-
|