diff options
Diffstat (limited to 'MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c')
| -rw-r--r-- | MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 34 |
1 files changed, 15 insertions, 19 deletions
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c index f160a1d2ec..370b8ea441 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c @@ -325,7 +325,7 @@ XhcCreateUrb ( Ep = &Urb->Ep;
Ep->DevAddr = DevAddr;
- Ep->EpAddr = EpAddr & 0x0F;
+ Ep->EpAddr = (UINT8)(EpAddr & 0x0F);
Ep->Direction = ((EpAddr & 0x80) != 0) ? EfiUsbDataIn : EfiUsbDataOut;
Ep->DevSpeed = DevSpeed;
Ep->MaxPacket = MaxPacket;
@@ -352,7 +352,6 @@ XhcCreateUrb ( **/
EFI_STATUS
-EFIAPI
XhcCreateTransferTrb (
IN USB_XHCI_DEV *Xhc,
IN URB *Urb
@@ -369,7 +368,7 @@ XhcCreateTransferTrb ( UINTN TrbNum;
SlotId = XhcDevAddrToSlotId(Urb->Ep.DevAddr);
- Dci = XhcEndpointToDci (Urb->Ep.EpAddr, Urb->Ep.Direction);
+ Dci = XhcEndpointToDci (Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction));
EPRing = (TRANSFER_RING *)(UINTN) UsbDevContext[SlotId].EndpointTransferRing[Dci-1];
Urb->Ring = EPRing;
OutputDevContxt = (DEVICE_CONTEXT *)(UINTN) Xhc->DCBAA[SlotId];
@@ -610,7 +609,7 @@ XhcInitSched ( //
MaxScratchpadBufs = ((Xhc->HcSParams2.Data.ScratchBufHi) << 5) | (Xhc->HcSParams2.Data.ScratchBufLo);
Xhc->MaxScratchpadBufs = MaxScratchpadBufs;
- ASSERT (MaxScratchpadBufs >= 0 && MaxScratchpadBufs <= 1023);
+ ASSERT (MaxScratchpadBufs <= 1023);
if (MaxScratchpadBufs != 0) {
ScratchBuf = AllocateAlignedZeroPool(MaxScratchpadBufs * sizeof (UINT64), Xhc->PageSize);
ASSERT (ScratchBuf != NULL);
@@ -633,8 +632,8 @@ XhcInitSched ( // a 64-bit address pointing to where the Device Context Base Address Array is located.
//
Xhc->DCBAA = (UINT64 *)(UINTN)Dcbaa;
- XhcWriteOpReg64 (Xhc, XHC_DCBAAP_OFFSET, (UINT64)Xhc->DCBAA);
- DEBUG ((EFI_D_INFO, "XhcInitSched:DCBAA=0x%x\n", (UINT64)Xhc->DCBAA));
+ XhcWriteOpReg64 (Xhc, XHC_DCBAAP_OFFSET, (UINT64)(UINTN)Xhc->DCBAA);
+ DEBUG ((EFI_D_INFO, "XhcInitSched:DCBAA=0x%x\n", (UINT64)(UINTN)Xhc->DCBAA));
//
// Define the Command Ring Dequeue Pointer by programming the Command Ring Control Register
@@ -705,7 +704,7 @@ XhcRecoverHaltedEndpoint ( Status = EFI_SUCCESS;
SlotId = XhcDevAddrToSlotId(Urb->Ep.DevAddr);
- Dci = XhcEndpointToDci(Urb->Ep.EpAddr, Urb->Ep.Direction);
+ Dci = XhcEndpointToDci(Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction));
DEBUG ((EFI_D_INFO, "Recovery Halted Slot = %x,Dci = %x\n", SlotId, Dci));
@@ -760,7 +759,6 @@ XhcRecoverHaltedEndpoint ( **/
VOID
-EFIAPI
CreateEventRing (
IN USB_XHCI_DEV *Xhc,
IN UINT8 EventInterrupter,
@@ -811,7 +809,7 @@ CreateEventRing ( XhcWriteRuntimeReg64 (
Xhc,
XHC_ERDP_OFFSET + (32 * EventRing->EventInterrupter),
- (UINT64)EventRing->EventRingDequeue
+ (UINT64)(UINTN)EventRing->EventRingDequeue
);
//
// Program the Interrupter Event Ring Segment Table Base Address (ERSTBA) register(5.5.2.3.2)
@@ -819,7 +817,7 @@ CreateEventRing ( XhcWriteRuntimeReg64 (
Xhc,
XHC_ERSTBA_OFFSET + (32 * EventRing->EventInterrupter),
- (UINT64) ERSTBase
+ (UINT64)(UINTN)ERSTBase
);
//
// Need set IMAN IE bit to enble the ring interrupt
@@ -836,7 +834,6 @@ CreateEventRing ( **/
VOID
-EFIAPI
CreateTransferRing (
IN USB_XHCI_DEV *Xhc,
IN UINTN TrbNum,
@@ -1037,7 +1034,7 @@ XhcCheckUrbResult ( Urb->EvtRing->EventRingDequeue = Urb->EvtTrbStart;
for (Index = 0; Index < Urb->EvtRing->TrbNumber; Index++) {
XhcSyncEventRing (Xhc, Urb->EvtRing);
- Status = XhcCheckNewEvent (Xhc, Urb->EvtRing, &(TRB *)EvtTrb);
+ Status = XhcCheckNewEvent (Xhc, Urb->EvtRing, ((TRB **)&EvtTrb));
if (Status == EFI_NOT_READY) {
Urb->Result |= EFI_USB_ERR_TIMEOUT;
goto EXIT;
@@ -1151,7 +1148,7 @@ XhcExecTransfer ( Dci = 0;
} else {
SlotId = XhcDevAddrToSlotId(Urb->Ep.DevAddr);
- Dci = XhcEndpointToDci(Urb->Ep.EpAddr, Urb->Ep.Direction);
+ Dci = XhcEndpointToDci(Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction));
}
Status = EFI_SUCCESS;
@@ -1459,7 +1456,7 @@ XhcEndpointToDci ( if (EpAddr == 0) {
return 1;
} else {
- Index = 2 * EpAddr;
+ Index = (UINT8) (2 * EpAddr);
if (Direction == EfiUsbDataIn) {
Index += 1;
}
@@ -1476,7 +1473,6 @@ XhcEndpointToDci ( **/
UINT8
-EFIAPI
XhcDevAddrToSlotId (
IN UINT8 DevAddr
)
@@ -1613,11 +1609,11 @@ XhcSyncEventRing ( XHC_ERDP_OFFSET + (32 * EvtRing->EventInterrupter)
);
- if (((UINT64) XhcDequeue & (~0x0F)) != ((UINT64) EvtRing->EventRingDequeue & (~0x0F))) {
+ if (((UINT64)(UINTN)XhcDequeue & (~0x0F)) != ((UINT64)(UINTN)EvtRing->EventRingDequeue & (~0x0F))) {
XhcWriteRuntimeReg64 (
Xhc,
XHC_ERDP_OFFSET + (32 * EvtRing->EventInterrupter),
- (UINT64)EvtRing->EventRingDequeue | BIT3
+ (UINT64)(UINTN)EvtRing->EventRingDequeue | BIT3
);
}
@@ -1782,7 +1778,7 @@ RingIntTransferDoorBell ( UINT8 Dci;
SlotId = XhcDevAddrToSlotId(Urb->Ep.DevAddr);
- Dci = XhcEndpointToDci(Urb->Ep.EpAddr, Urb->Ep.Direction);
+ Dci = XhcEndpointToDci(Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction));
XhcRingDoorBell (Xhc, SlotId, Dci);
return EFI_SUCCESS;
}
@@ -2141,7 +2137,7 @@ XhcSetConfigCmd ( EpDesc = (USB_ENDPOINT_DESCRIPTOR *)((UINTN)EpDesc + EpDesc->Length);
}
- EpAddr = EpDesc->EndpointAddress & 0x0F;
+ EpAddr = (UINT8)(EpDesc->EndpointAddress & 0x0F);
Direction = (UINT8)((EpDesc->EndpointAddress & 0x80) ? EfiUsbDataIn : EfiUsbDataOut);
Dci = XhcEndpointToDci (EpAddr, Direction);
|