diff options
Diffstat (limited to 'MdeModulePkg/Bus/Scsi/ScsiDiskDxe')
| -rw-r--r-- | MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 313 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 147 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | 11 |
3 files changed, 446 insertions, 25 deletions
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c index 6faebc7305..8f9a6256e9 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c @@ -1,7 +1,7 @@ /** @file
SCSI disk driver that layers on every SCSI IO protocol in the system.
-Copyright (c) 2006 - 2008, Intel Corporation. <BR>
+Copyright (c) 2006 - 2009, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -15,7 +15,6 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "ScsiDisk.h"
-
EFI_DRIVER_BINDING_PROTOCOL gScsiDiskDriverBinding = {
ScsiDiskDriverBindingSupported,
ScsiDiskDriverBindingStart,
@@ -25,6 +24,13 @@ EFI_DRIVER_BINDING_PROTOCOL gScsiDiskDriverBinding = { NULL
};
+EFI_DISK_INFO_PROTOCOL gScsiDiskInfoProtocolTemplate = {
+ EFI_DISK_INFO_SCSI_INTERFACE_GUID,
+ ScsiDiskInfoInquiry,
+ ScsiDiskInfoIdentify,
+ ScsiDiskInfoSenseData,
+ ScsiDiskInfoWhichIde
+};
/**
The user Entry Point for module ScsiDisk.
@@ -248,10 +254,13 @@ ScsiDiskDriverBindingStart ( // Determine if Block IO should be produced on this controller handle
//
if (DetermineInstallBlockIo(Controller)) {
+ InitializeInstallDiskInfo(ScsiDiskDevice, Controller);
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiBlockIoProtocolGuid,
&ScsiDiskDevice->BlkIo,
+ &gEfiDiskInfoProtocolGuid,
+ &ScsiDiskDevice->DiskInfo,
NULL
);
if (!EFI_ERROR(Status)) {
@@ -333,10 +342,13 @@ ScsiDiskDriverBindingStop ( }
ScsiDiskDevice = SCSI_DISK_DEV_FROM_THIS (BlkIo);
- Status = gBS->UninstallProtocolInterface (
+ Status = gBS->UninstallMultipleProtocolInterfaces (
Controller,
&gEfiBlockIoProtocolGuid,
- &ScsiDiskDevice->BlkIo
+ &ScsiDiskDevice->BlkIo,
+ &gEfiDiskInfoProtocolGuid,
+ &ScsiDiskDevice->DiskInfo,
+ NULL
);
if (!EFI_ERROR (Status)) {
gBS->CloseProtocol (
@@ -366,7 +378,7 @@ ScsiDiskDriverBindingStop ( @retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
- @return EFI_STATUS is retured from EFI_SCSI_IO_PROTOCOL.ResetDevice().
+ @return EFI_STATUS is returned from EFI_SCSI_IO_PROTOCOL.ResetDevice().
**/
EFI_STATUS
@@ -649,7 +661,7 @@ ScsiDiskFlushBlocks ( /**
- Dectect Device and read out capacity ,if error occurs, parse the sense key.
+ Detect Device and read out capacity ,if error occurs, parse the sense key.
@param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param MustReadCapacity The flag about reading device capacity
@@ -954,7 +966,7 @@ ScsiDiskInquiryDevice ( }
/**
- To test deivice.
+ To test device.
When Test Unit Ready command succeeds, retrieve Sense Keys via Request Sense;
When Test Unit Ready command encounters any error caused by host adapter or
@@ -1380,7 +1392,7 @@ CheckTargetStatus ( Retrieve all sense keys from the device.
When encountering error during the process, if retrieve sense keys before
- error encounterred, it returns the sense keys with return status set to EFI_SUCCESS,
+ error encountered, it returns the sense keys with return status set to EFI_SUCCESS,
and NeedRetry set to FALSE; otherwize, return the proper return status.
@param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@@ -1484,7 +1496,7 @@ ScsiDiskRequestSenseKeys ( **/
VOID
GetMediaInfo (
- IN OUT SCSI_DISK_DEV *ScsiDiskDevice,
+ IN OUT SCSI_DISK_DEV *ScsiDiskDevice,
EFI_SCSI_DISK_CAPACITY_DATA *Capacity10,
EFI_SCSI_DISK_CAPACITY_DATA16 *Capacity16
)
@@ -1560,7 +1572,7 @@ ParseInquiryData ( /**
Read sector from SCSI Disk.
- @param ScsiDiskDevice The poiniter of SCSI_DISK_DEV
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param Buffer The buffer to fill in the read out data
@param Lba Logic block address
@param NumberOfBlocks The number of blocks to read
@@ -1664,7 +1676,7 @@ ScsiDiskReadSectors ( /**
Write sector to SCSI Disk.
- @param ScsiDiskDevice The poiniter of SCSI_DISK_DEV
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param Buffer The buffer of data to be written into SCSI Disk
@param Lba Logic block address
@param NumberOfBlocks The number of blocks to read
@@ -1763,7 +1775,7 @@ ScsiDiskWriteSectors ( /**
- Sumbmit Read command.
+ Submit Read command.
@param ScsiDiskDevice The pointer of ScsiDiskDevice
@param NeedRetry The pointer of flag indicates if needs retry if error happens
@@ -2036,7 +2048,7 @@ ScsiDiskIsHardwareError ( @param SenseCounts The number of sense key
@retval TRUE Media is changed.
- @retval FALSE Medit is NOT changed.
+ @retval FALSE Media is NOT changed.
**/
BOOLEAN
ScsiDiskIsMediaChange (
@@ -2256,7 +2268,7 @@ ReleaseScsiDiskDeviceResources ( Determine if Block Io should be produced.
- @param ChildHandle Child Handle to retrive Parent information.
+ @param ChildHandle Child Handle to retrieve Parent information.
@retval TRUE Should produce Block Io.
@retval FALSE Should not produce Block Io.
@@ -2353,3 +2365,276 @@ GetParentProtocol ( return NULL;
}
+/**
+ Provides inquiry information for the controller type.
+
+ This function is used by the IDE bus driver to get inquiry data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in,out] InquiryData Pointer to a buffer for the inquiry data.
+ @param[in,out] InquiryDataSize Pointer to the value for the inquiry data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoInquiry (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *InquiryData,
+ IN OUT UINT32 *InquiryDataSize
+ )
+{
+ EFI_STATUS Status;
+ SCSI_DISK_DEV *ScsiDiskDevice;
+
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_DISKINFO (This);
+
+ Status = EFI_BUFFER_TOO_SMALL;
+ if (*InquiryDataSize >= sizeof (ScsiDiskDevice->InquiryData)) {
+ Status = EFI_SUCCESS;
+ CopyMem (InquiryData, &ScsiDiskDevice->InquiryData, sizeof (ScsiDiskDevice->InquiryData));
+ }
+ *InquiryDataSize = sizeof (ScsiDiskDevice->InquiryData);
+ return Status;
+}
+
+
+/**
+ Provides identify information for the controller type.
+
+ This function is used by the IDE bus driver to get identify data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ instance.
+ @param[in,out] IdentifyData Pointer to a buffer for the identify data.
+ @param[in,out] IdentifyDataSize Pointer to the value for the identify data
+ size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoIdentify (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *IdentifyData,
+ IN OUT UINT32 *IdentifyDataSize
+ )
+{
+ EFI_STATUS Status;
+ SCSI_DISK_DEV *ScsiDiskDevice;
+
+ if (CompareGuid (&This->Interface, &gEfiDiskInfoScsiInterfaceGuid)) {
+ //
+ // Physical SCSI bus does not support this data class.
+ //
+ return EFI_NOT_FOUND;
+ }
+
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_DISKINFO (This);
+
+ Status = EFI_BUFFER_TOO_SMALL;
+ if (*IdentifyDataSize >= sizeof (ScsiDiskDevice->IdentifyData)) {
+ Status = EFI_SUCCESS;
+ CopyMem (IdentifyData, &ScsiDiskDevice->IdentifyData, sizeof (ScsiDiskDevice->IdentifyData));
+ }
+ *IdentifyDataSize = sizeof (ScsiDiskDevice->IdentifyData);
+ return Status;
+}
+
+/**
+ Provides sense data information for the controller type.
+
+ This function is used by the IDE bus driver to get sense data.
+ Data format of Sense data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in,out] SenseData Pointer to the SenseData.
+ @param[in,out] SenseDataSize Size of SenseData in bytes.
+ @param[out] SenseDataNumber Pointer to the value for the sense data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class.
+ @retval EFI_DEVICE_ERROR Error reading SenseData from device.
+ @retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoSenseData (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *SenseData,
+ IN OUT UINT32 *SenseDataSize,
+ OUT UINT8 *SenseDataNumber
+ )
+{
+ return EFI_NOT_FOUND;
+}
+
+
+/**
+ This function is used by the IDE bus driver to get controller information.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
+ @param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
+
+ @retval EFI_SUCCESS IdeChannel and IdeDevice are valid.
+ @retval EFI_UNSUPPORTED This is not an IDE device.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoWhichIde (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ OUT UINT32 *IdeChannel,
+ OUT UINT32 *IdeDevice
+ )
+{
+ SCSI_DISK_DEV *ScsiDiskDevice;
+
+ if (CompareGuid (&This->Interface, &gEfiDiskInfoScsiInterfaceGuid)) {
+ //
+ // This is not an IDE physical device.
+ //
+ return EFI_UNSUPPORTED;
+ }
+
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_DISKINFO (This);
+ *IdeChannel = ScsiDiskDevice->Channel;
+ *IdeDevice = ScsiDiskDevice->Device;
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Issues ATA IDENTIFY DEVICE command to identify ATAPI device.
+
+ This function tries to fill 512-byte ATAPI_IDENTIFY_DATA for ATAPI device to
+ implement Identify() interface for DiskInfo protocol. The ATA command is sent
+ via SCSI Request Packet.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
+
+ @retval EFI_SUCCESS The ATAPI device identify data were retrieved successfully.
+ @retval others Some error occurred during the identification that ATAPI device.
+
+**/
+EFI_STATUS
+AtapiIdentifyDevice (
+ IN OUT SCSI_DISK_DEV *ScsiDiskDevice
+ )
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ UINT8 Cdb[6];
+
+ //
+ // Initialize SCSI REQUEST_PACKET and 6-byte Cdb
+ //
+ ZeroMem (&CommandPacket, sizeof (CommandPacket));
+ ZeroMem (Cdb, sizeof (Cdb));
+
+ Cdb[0] = ATA_CMD_IDENTIFY_DEVICE;
+ CommandPacket.Timeout = EFI_TIMER_PERIOD_SECONDS (1);
+ CommandPacket.Cdb = Cdb;
+ CommandPacket.CdbLength = sizeof (Cdb);
+ CommandPacket.InDataBuffer = &ScsiDiskDevice->IdentifyData;
+ CommandPacket.InTransferLength = sizeof (ScsiDiskDevice->IdentifyData);
+
+ return ScsiDiskDevice->ScsiIo->ExecuteScsiCommand (ScsiDiskDevice->ScsiIo, &CommandPacket, NULL);
+}
+
+
+/**
+ Initialize the installation of DiskInfo protocol.
+
+ This function prepares for the installation of DiskInfo protocol on the child handle.
+ By default, it installs DiskInfo protocol with SCSI interface GUID. If it further
+ detects that the physical device is an ATAPI/AHCI device, it then updates interface GUID
+ to be IDE/AHCI interface GUID.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Child handle to install DiskInfo protocol.
+
+**/
+VOID
+InitializeInstallDiskInfo (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathNode;
+ EFI_DEVICE_PATH_PROTOCOL *ChildDevicePathNode;
+ ATAPI_DEVICE_PATH *AtapiDevicePath;
+ SATA_DEVICE_PATH *SataDevicePath;
+ UINTN IdentifyRetry;
+
+ Status = gBS->HandleProtocol (ChildHandle, &gEfiDevicePathProtocolGuid, (VOID **) &DevicePathNode);
+ //
+ // Device Path protocol must be installed on the device handle.
+ //
+ ASSERT_EFI_ERROR (Status);
+ //
+ // Copy the DiskInfo protocol template.
+ //
+ CopyMem (&ScsiDiskDevice->DiskInfo, &gScsiDiskInfoProtocolTemplate, sizeof (gScsiDiskInfoProtocolTemplate));
+
+ while (!IsDevicePathEnd (DevicePathNode)) {
+ ChildDevicePathNode = NextDevicePathNode (DevicePathNode);
+ if ((DevicePathType (DevicePathNode) == HARDWARE_DEVICE_PATH) &&
+ (DevicePathSubType (DevicePathNode) == HW_PCI_DP) &&
+ (DevicePathType (ChildDevicePathNode) == MESSAGING_DEVICE_PATH) &&
+ ((DevicePathSubType (ChildDevicePathNode) == MSG_ATAPI_DP) ||
+ (DevicePathSubType (ChildDevicePathNode) == MSG_SATA_DP))) {
+
+ IdentifyRetry = 3;
+ do {
+ //
+ // Issue ATA Identify Device Command via SCSI command, which is required to publish DiskInfo protocol
+ // with IDE/AHCI interface GUID.
+ //
+ Status = AtapiIdentifyDevice (ScsiDiskDevice);
+ if (!EFI_ERROR (Status)) {
+ if (DevicePathSubType(ChildDevicePathNode) == MSG_ATAPI_DP) {
+ //
+ // We find the valid ATAPI device path
+ //
+ AtapiDevicePath = (ATAPI_DEVICE_PATH *) ChildDevicePathNode;
+ ScsiDiskDevice->Channel = AtapiDevicePath->PrimarySecondary;
+ ScsiDiskDevice->Device = AtapiDevicePath->SlaveMaster;
+ //
+ // Update the DiskInfo.Interface to IDE interface GUID for the physical ATAPI device.
+ //
+ CopyGuid (&ScsiDiskDevice->DiskInfo.Interface, &gEfiDiskInfoIdeInterfaceGuid);
+ } else {
+ //
+ // We find the valid SATA device path
+ //
+ SataDevicePath = (SATA_DEVICE_PATH *) ChildDevicePathNode;
+ ScsiDiskDevice->Channel = SataDevicePath->HBAPortNumber;
+ ScsiDiskDevice->Device = SataDevicePath->PortMultiplierPortNumber;
+ //
+ // Update the DiskInfo.Interface to AHCI interface GUID for the physical AHCI device.
+ //
+ CopyGuid (&ScsiDiskDevice->DiskInfo.Interface, &gEfiDiskInfoAhciInterfaceGuid);
+ }
+ return;
+ }
+ } while (--IdentifyRetry > 0);
+ }
+ DevicePathNode = ChildDevicePathNode;
+ }
+
+ return;
+}
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h index c5761c2cec..a7bc94313a 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h @@ -1,7 +1,7 @@ /** @file
Header file for SCSI Disk Driver.
-Copyright (c) 2004 - 2008, Intel Corporation. <BR>
+Copyright (c) 2004 - 2009, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -25,6 +25,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include <Protocol/DriverBinding.h>
#include <Protocol/ScsiPassThruExt.h>
#include <Protocol/ScsiPassThru.h>
+#include <Protocol/DiskInfo.h>
+
#include <Library/DebugLib.h>
#include <Library/UefiDriverEntryPoint.h>
@@ -33,8 +35,10 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include <Library/MemoryAllocationLib.h>
#include <Library/UefiScsiLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DevicePathLib.h>
#include <IndustryStandard/Scsi.h>
+#include <IndustryStandard/Atapi.h>
#define IS_DEVICE_FIXED(a) (a)->FixedDevice ? 1 : 0
@@ -58,10 +62,20 @@ typedef struct { EFI_UNICODE_STRING_TABLE *ControllerNameTable;
+ EFI_DISK_INFO_PROTOCOL DiskInfo;
+
+ //
+ // The following fields are only valid for ATAPI/SATA device
+ //
+ UINT32 Channel;
+ UINT32 Device;
+ ATAPI_IDENTIFY_DATA IdentifyData;
} SCSI_DISK_DEV;
#define SCSI_DISK_DEV_FROM_THIS(a) CR (a, SCSI_DISK_DEV, BlkIo, SCSI_DISK_DEV_SIGNATURE)
+#define SCSI_DISK_DEV_FROM_DISKINFO(a) CR (a, SCSI_DISK_DEV, DiskInfo, SCSI_DISK_DEV_SIGNATURE)
+
//
// Global Variables
//
@@ -385,8 +399,107 @@ ScsiDiskFlushBlocks ( IN EFI_BLOCK_IO_PROTOCOL *This
);
+
+/**
+ Provides inquiry information for the controller type.
+
+ This function is used by the IDE bus driver to get inquiry data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in,out] InquiryData Pointer to a buffer for the inquiry data.
+ @param[in,out] InquiryDataSize Pointer to the value for the inquiry data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading InquiryData from device
+ @retval EFI_BUFFER_TOO_SMALL InquiryDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoInquiry (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *InquiryData,
+ IN OUT UINT32 *InquiryDataSize
+ );
+
+
+/**
+ Provides identify information for the controller type.
+
+ This function is used by the IDE bus driver to get identify data. Data format
+ of Identify data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL
+ instance.
+ @param[in,out] IdentifyData Pointer to a buffer for the identify data.
+ @param[in,out] IdentifyDataSize Pointer to the value for the identify data
+ size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class
+ @retval EFI_DEVICE_ERROR Error reading IdentifyData from device
+ @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoIdentify (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *IdentifyData,
+ IN OUT UINT32 *IdentifyDataSize
+ );
+
+
+/**
+ Provides sense data information for the controller type.
+
+ This function is used by the IDE bus driver to get sense data.
+ Data format of Sense data is defined by the Interface GUID.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[in,out] SenseData Pointer to the SenseData.
+ @param[in,out] SenseDataSize Size of SenseData in bytes.
+ @param[out] SenseDataNumber Pointer to the value for the sense data size.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_NOT_FOUND Device does not support this data class.
+ @retval EFI_DEVICE_ERROR Error reading SenseData from device.
+ @retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoSenseData (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ IN OUT VOID *SenseData,
+ IN OUT UINT32 *SenseDataSize,
+ OUT UINT8 *SenseDataNumber
+ );
+
+/**
+ This function is used by the IDE bus driver to get controller information.
+
+ @param[in] This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
+ @param[out] IdeChannel Pointer to the Ide Channel number. Primary or secondary.
+ @param[out] IdeDevice Pointer to the Ide Device number. Master or slave.
+
+ @retval EFI_SUCCESS IdeChannel and IdeDevice are valid.
+ @retval EFI_UNSUPPORTED This is not an IDE device.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskInfoWhichIde (
+ IN EFI_DISK_INFO_PROTOCOL *This,
+ OUT UINT32 *IdeChannel,
+ OUT UINT32 *IdeDevice
+ );
+
+
/**
- Dectect Device and read out capacity ,if error occurs, parse the sense key.
+ Detect Device and read out capacity ,if error occurs, parse the sense key.
@param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param MustReadCapacity The flag about reading device capacity
@@ -404,7 +517,7 @@ ScsiDiskDetectMedia ( );
/**
- To test deivice.
+ To test device.
When Test Unit Ready command succeeds, retrieve Sense Keys via Request Sense;
When Test Unit Ready command encounters any error caused by host adapter or
@@ -505,7 +618,7 @@ CheckTargetStatus ( Retrieve all sense keys from the device.
When encountering error during the process, if retrieve sense keys before
- error encounterred, it returns the sense keys with return status set to EFI_SUCCESS,
+ error encountered, it returns the sense keys with return status set to EFI_SUCCESS,
and NeedRetry set to FALSE; otherwize, return the proper return status.
@param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@@ -557,7 +670,7 @@ ParseInquiryData ( /**
Read sector from SCSI Disk.
- @param ScsiDiskDevice The poiniter of SCSI_DISK_DEV
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param Buffer The buffer to fill in the read out data
@param Lba Logic block address
@param NumberOfBlocks The number of blocks to read
@@ -577,7 +690,7 @@ ScsiDiskReadSectors ( /**
Write sector to SCSI Disk.
- @param ScsiDiskDevice The poiniter of SCSI_DISK_DEV
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param Buffer The buffer of data to be written into SCSI Disk
@param Lba Logic block address
@param NumberOfBlocks The number of blocks to read
@@ -595,7 +708,7 @@ ScsiDiskWriteSectors ( );
/**
- Sumbmit Read command.
+ Submit Read command.
@param ScsiDiskDevice The pointer of ScsiDiskDevice
@param NeedRetry The pointer of flag indicates if needs retry if error happens
@@ -792,7 +905,7 @@ ReleaseScsiDiskDeviceResources ( Determine if Block Io should be produced.
- @param ChildHandle Child Handle to retrive Parent information.
+ @param ChildHandle Child Handle to retrieve Parent information.
@retval TRUE Should produce Block Io.
@retval FALSE Should not produce Block Io.
@@ -804,6 +917,24 @@ DetermineInstallBlockIo ( );
/**
+ Initialize the installation of DiskInfo protocol.
+
+ This function prepares for the installation of DiskInfo protocol on the child handle.
+ By default, it installs DiskInfo protocol with SCSI interface GUID. If it further
+ detects that the physical device is an ATAPI/AHCI device, it then updates interface GUID
+ to be IDE/AHCI interface GUID.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Child handle to install DiskInfo protocol.
+
+**/
+VOID
+InitializeInstallDiskInfo (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ );
+
+/**
Search protocol database and check to see if the protocol
specified by ProtocolGuid is present on a ControllerHandle and opened by
ChildHandle with an attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf index c39bc6d2d0..9e168071c6 100644 --- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf +++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf @@ -3,7 +3,7 @@ # Scsi Disk driver. This driver detects the Scsi disk media and installs Block I/O Protocol
# on the device handle that holds the SCSI I/O Portocol.
#
-# Copyright (c) 2006 - 2008, Intel Corporation. <BR>
+# Copyright (c) 2006 - 2009, Intel Corporation. <BR>
# All rights reserved. This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
@@ -50,11 +50,16 @@ UefiLib
UefiDriverEntryPoint
DebugLib
-
+ DevicePathLib
[Protocols]
+ gEfiDiskInfoProtocolGuid ## BY_START
gEfiBlockIoProtocolGuid ## BY_START
gEfiScsiIoProtocolGuid ## TO_START
gEfiScsiPassThruProtocolGuid ## TO_START
gEfiExtScsiPassThruProtocolGuid ## TO_START
-
+
+[Guids]
+ gEfiDiskInfoScsiInterfaceGuid ## SOMETIME_PRODUCES (The device is physical SCSI disk)
+ gEfiDiskInfoIdeInterfaceGuid ## SOMETIME_PRODUCES (The device is ATAPI device in IDE mode)
+ gEfiDiskInfoAhciInterfaceGuid ## SOMETIME_PRODUCES (The device is ATAPI device in AHCI mode)
|