diff options
Diffstat (limited to 'MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c')
| -rw-r--r-- | MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 1054 |
1 files changed, 1054 insertions, 0 deletions
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c new file mode 100644 index 0000000000..306fd37a29 --- /dev/null +++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c @@ -0,0 +1,1054 @@ +/** @file
+
+ Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "UfsPassThru.h"
+
+//
+// Template for Ufs Pass Thru private data.
+//
+UFS_PASS_THRU_PRIVATE_DATA gUfsPassThruTemplate = {
+ UFS_PASS_THRU_SIG, // Signature
+ NULL, // Handle
+ { // ExtScsiPassThruMode
+ 0xFFFFFFFF,
+ //
+ // Note that the driver doesn't support ExtScsiPassThru non blocking I/O.
+ //
+ EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL,
+ sizeof (UINTN)
+ },
+ { // ExtScsiPassThru
+ NULL,
+ UfsPassThruPassThru,
+ UfsPassThruGetNextTargetLun,
+ UfsPassThruBuildDevicePath,
+ UfsPassThruGetTargetLun,
+ UfsPassThruResetChannel,
+ UfsPassThruResetTargetLun,
+ UfsPassThruGetNextTarget
+ },
+ 0, // UfsHostController
+ 0, // UfsHcBase
+ 0, // Capabilities
+ 0, // TaskTag
+ 0, // UtpTrlBase
+ 0, // Nutrs
+ 0, // TrlMapping
+ 0, // UtpTmrlBase
+ 0, // Nutmrs
+ 0, // TmrlMapping
+ { // Luns
+ {
+ UFS_LUN_0, // Ufs Common Lun 0
+ UFS_LUN_1, // Ufs Common Lun 1
+ UFS_LUN_2, // Ufs Common Lun 2
+ UFS_LUN_3, // Ufs Common Lun 3
+ UFS_LUN_4, // Ufs Common Lun 4
+ UFS_LUN_5, // Ufs Common Lun 5
+ UFS_LUN_6, // Ufs Common Lun 6
+ UFS_LUN_7, // Ufs Common Lun 7
+ UFS_WLUN_REPORT_LUNS, // Ufs Reports Luns Well Known Lun
+ UFS_WLUN_UFS_DEV, // Ufs Device Well Known Lun
+ UFS_WLUN_BOOT, // Ufs Boot Well Known Lun
+ UFS_WLUN_RPMB // RPMB Well Known Lun
+ },
+ 0x0000, // By default don't expose any Luns.
+ 0x0
+ }
+};
+
+EFI_DRIVER_BINDING_PROTOCOL gUfsPassThruDriverBinding = {
+ UfsPassThruDriverBindingSupported,
+ UfsPassThruDriverBindingStart,
+ UfsPassThruDriverBindingStop,
+ 0x10,
+ NULL,
+ NULL
+};
+
+UFS_DEVICE_PATH mUfsDevicePathTemplate = {
+ {
+ MESSAGING_DEVICE_PATH,
+ MSG_UFS_DP,
+ {
+ (UINT8) (sizeof (UFS_DEVICE_PATH)),
+ (UINT8) ((sizeof (UFS_DEVICE_PATH)) >> 8)
+ }
+ },
+ 0,
+ 0
+};
+
+UINT8 mUfsTargetId[TARGET_MAX_BYTES];
+
+/**
+ Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
+ supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
+ nonblocking I/O functionality is optional.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it represents
+ the id of the SCSI device to send the SCSI Request Packet. Each
+ transport driver may choose to utilize a subset of this size to suit the needs
+ of transport target representation. For example, a Fibre Channel driver
+ may use only 8 bytes (WWN) to represent an FC target.
+ @param Lun The LUN of the SCSI device to send the SCSI Request Packet.
+ @param Packet A pointer to the SCSI Request Packet to send to the SCSI device
+ specified by Target and Lun.
+ @param Event If nonblocking I/O is not supported then Event is ignored, and blocking
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If
+ Event is not NULL and non blocking I/O is supported, then
+ nonblocking I/O is performed, and Event will be signaled when the
+ SCSI Request Packet completes.
+
+ @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
+ commands, InTransferLength bytes were transferred from
+ InDataBuffer. For write and bi-directional commands,
+ OutTransferLength bytes were transferred by
+ OutDataBuffer.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
+ could be transferred is returned in InTransferLength. For write
+ and bi-directional commands, OutTransferLength bytes were
+ transferred by OutDataBuffer.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Request Packets already queued. The caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
+ Packet.
+ @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
+ by the host adapter. This includes the case of Bi-directional SCSI
+ commands not supported by the implementation. The SCSI Request
+ Packet was not sent, so no additional status information is available.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruPassThru (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+ UINT8 UfsLun;
+ UINT16 Index;
+
+ Private = UFS_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if ((Packet == NULL) || (Packet->Cdb == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Don't support variable length CDB
+ //
+ if ((Packet->CdbLength != 6) && (Packet->CdbLength != 10) &&
+ (Packet->CdbLength != 12) && (Packet->CdbLength != 16)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Packet->SenseDataLength != 0) && (Packet->SenseData == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->InDataBuffer, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->OutDataBuffer, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->SenseData, This->Mode->IoAlign)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For UFS 2.0 compatible device, 0 is always used to represent the location of the UFS device.
+ //
+ SetMem (mUfsTargetId, TARGET_MAX_BYTES, 0x00);
+ if ((Target == NULL) || (CompareMem(Target, mUfsTargetId, TARGET_MAX_BYTES) != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // UFS 2.0 spec Section 10.6.7 - Translation of 8-bit UFS LUN to 64-bit SCSI LUN Address
+ // 0xC1 in the first 8 bits of the 64-bit address indicates a well known LUN address in the SAM SCSI format.
+ // The second 8 bits of the 64-bit address saves the corresponding 8-bit UFS LUN.
+ //
+ if ((UINT8)Lun == UFS_WLUN_PREFIX) {
+ UfsLun = BIT7 | (((UINT8*)&Lun)[1] & 0xFF);
+ } else if ((UINT8)Lun == 0) {
+ UfsLun = ((UINT8*)&Lun)[1] & 0xFF;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ for (Index = 0; Index < UFS_MAX_LUNS; Index++) {
+ if ((Private->Luns.BitMask & (BIT0 << Index)) == 0) {
+ continue;
+ }
+
+ if (Private->Luns.Lun[Index] == UfsLun) {
+ break;
+ }
+ }
+
+ if (Index == UFS_MAX_LUNS) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = UfsExecScsiCmds (Private, UfsLun, Packet);
+
+ return Status;
+}
+
+/**
+ Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
+ can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
+ Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
+ Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
+ channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target On input, a pointer to the Target ID (an array of size
+ TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+ @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
+ channel. On output, a pointer to the LUN of the next SCSI device present
+ on a SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
+ channel was returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
+ not returned on a previous call to GetNextTargetLun().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruGetNextTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target,
+ IN OUT UINT64 *Lun
+ )
+{
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+ UINT8 UfsLun;
+ UINT16 Index;
+ UINT16 Next;
+
+ Private = UFS_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if (Target == NULL || Lun == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ UfsLun = 0;
+ SetMem (mUfsTargetId, TARGET_MAX_BYTES, 0xFF);
+ if (CompareMem (*Target, mUfsTargetId, TARGET_MAX_BYTES) == 0) {
+ //
+ // If the array is all 0xFF's, return the first exposed Lun to caller.
+ //
+ SetMem (*Target, TARGET_MAX_BYTES, 0x00);
+ for (Index = 0; Index < UFS_MAX_LUNS; Index++) {
+ if ((Private->Luns.BitMask & (BIT0 << Index)) != 0) {
+ UfsLun = Private->Luns.Lun[Index];
+ break;
+ }
+ }
+ if (Index != UFS_MAX_LUNS) {
+ *Lun = 0;
+ if ((UfsLun & BIT7) == BIT7) {
+ ((UINT8*)Lun)[0] = UFS_WLUN_PREFIX;
+ ((UINT8*)Lun)[1] = UfsLun & ~BIT7;
+ } else {
+ ((UINT8*)Lun)[1] = UfsLun;
+ }
+ return EFI_SUCCESS;
+ } else {
+ return EFI_NOT_FOUND;
+ }
+ }
+
+ SetMem (mUfsTargetId, TARGET_MAX_BYTES, 0x00);
+ if (CompareMem (*Target, mUfsTargetId, TARGET_MAX_BYTES) == 0) {
+ if (((UINT8*)Lun)[0] == UFS_WLUN_PREFIX) {
+ UfsLun = BIT7 | (((UINT8*)Lun)[1] & 0xFF);
+ } else if (((UINT8*)Lun)[0] == 0) {
+ UfsLun = ((UINT8*)Lun)[1] & 0xFF;
+ } else {
+ return EFI_NOT_FOUND;
+ }
+
+ for (Index = 0; Index < UFS_MAX_LUNS; Index++) {
+ if ((Private->Luns.BitMask & (BIT0 << Index)) == 0) {
+ continue;
+ }
+
+ if (Private->Luns.Lun[Index] != UfsLun) {
+ continue;
+ }
+
+ for (Next = Index + 1; Next < UFS_MAX_LUNS; Next++) {
+ if ((Private->Luns.BitMask & (BIT0 << Next)) != 0) {
+ UfsLun = Private->Luns.Lun[Next];
+ break;
+ }
+ }
+
+ if (Next == UFS_MAX_LUNS) {
+ return EFI_NOT_FOUND;
+ } else {
+ break;
+ }
+ }
+
+ if (Index != UFS_MAX_LUNS) {
+ *Lun = 0;
+ if ((UfsLun & BIT7) == BIT7) {
+ ((UINT8*)Lun)[0] = UFS_WLUN_PREFIX;
+ ((UINT8*)Lun)[1] = UfsLun & ~BIT7;
+ } else {
+ ((UINT8*)Lun)[1] = UfsLun;
+ }
+ return EFI_SUCCESS;
+ } else {
+ return EFI_NOT_FOUND;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Used to allocate and build a device path node for a SCSI device on a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
+ Target ID of the SCSI device for which a device path node is to be
+ allocated and built. Transport drivers may chose to utilize a subset of
+ this size to suit the representation of targets. For example, a Fibre
+ Channel driver may use only 8 bytes (WWN) in the array to represent a
+ FC target.
+ @param Lun The LUN of the SCSI device for which a device path node is to be
+ allocated and built.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ specified by Target and Lun. This function is responsible for
+ allocating the buffer DevicePath with the boot service
+ AllocatePool(). It is the caller's responsibility to free
+ DevicePath when the caller is finished with DevicePath.
+
+ @retval EFI_SUCCESS The device path node that describes the SCSI device specified by
+ Target and Lun was allocated and returned in
+ DevicePath.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
+ on the SCSI channel.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruBuildDevicePath (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+ EFI_DEV_PATH *DevicePathNode;
+ UINT8 UfsLun;
+ UINT16 Index;
+
+ Private = UFS_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ //
+ // Validate parameters passed in.
+ //
+ SetMem (mUfsTargetId, TARGET_MAX_BYTES, 0x00);
+ if (CompareMem (Target, mUfsTargetId, TARGET_MAX_BYTES) != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((UINT8)Lun == UFS_WLUN_PREFIX) {
+ UfsLun = BIT7 | (((UINT8*)&Lun)[1] & 0xFF);
+ } else if ((UINT8)Lun == 0) {
+ UfsLun = ((UINT8*)&Lun)[1] & 0xFF;
+ } else {
+ return EFI_NOT_FOUND;
+ }
+
+ for (Index = 0; Index < UFS_MAX_LUNS; Index++) {
+ if ((Private->Luns.BitMask & (BIT0 << Index)) == 0) {
+ continue;
+ }
+
+ if (Private->Luns.Lun[Index] == UfsLun) {
+ break;
+ }
+ }
+
+ if (Index == UFS_MAX_LUNS) {
+ return EFI_NOT_FOUND;
+ }
+
+ DevicePathNode = AllocateCopyPool (sizeof (UFS_DEVICE_PATH), &mUfsDevicePathTemplate);
+ if (DevicePathNode == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DevicePathNode->Ufs.Pun = 0;
+ DevicePathNode->Ufs.Lun = UfsLun;
+
+ *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) DevicePathNode;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to translate a device path node to a Target ID and LUN.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param DevicePath A pointer to a single device path node that describes the SCSI device
+ on the SCSI channel.
+ @param Target A pointer to the Target Array which represents the ID of a SCSI device
+ on the SCSI channel.
+ @param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
+
+ @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
+ LUN, and they were returned in Target and Lun.
+ @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
+ does not exist.
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in
+ DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruGetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 **Target,
+ OUT UINT64 *Lun
+ )
+{
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+ EFI_DEV_PATH *DevicePathNode;
+ UINT8 Pun;
+ UINT8 UfsLun;
+ UINT16 Index;
+
+ Private = UFS_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ //
+ // Validate parameters passed in.
+ //
+ if (DevicePath == NULL || Target == NULL || Lun == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether the DevicePath belongs to SCSI_DEVICE_PATH
+ //
+ if ((DevicePath->Type != MESSAGING_DEVICE_PATH) || (DevicePath->SubType != MSG_UFS_DP) ||
+ (DevicePathNodeLength(DevicePath) != sizeof(SCSI_DEVICE_PATH))) {
+ return EFI_UNSUPPORTED;
+ }
+
+ DevicePathNode = (EFI_DEV_PATH *) DevicePath;
+
+ Pun = (UINT8) DevicePathNode->Ufs.Pun;
+ UfsLun = (UINT8) DevicePathNode->Ufs.Lun;
+
+ if (Pun != 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ for (Index = 0; Index < UFS_MAX_LUNS; Index++) {
+ if ((Private->Luns.BitMask & (BIT0 << Index)) == 0) {
+ continue;
+ }
+
+ if (Private->Luns.Lun[Index] == UfsLun) {
+ break;
+ }
+ }
+
+ if (Index == UFS_MAX_LUNS) {
+ return EFI_NOT_FOUND;
+ }
+
+ SetMem (*Target, TARGET_MAX_BYTES, 0x00);
+ *Lun = 0;
+ if ((UfsLun & BIT7) == BIT7) {
+ ((UINT8*)Lun)[0] = UFS_WLUN_PREFIX;
+ ((UINT8*)Lun)[1] = UfsLun & ~BIT7;
+ } else {
+ ((UINT8*)Lun)[1] = UfsLun;
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The SCSI channel was reset.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruResetChannel (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
+ )
+{
+ //
+ // Return success directly then upper layer driver could think reset channel operation is done.
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Resets a SCSI logical unit that is connected to a SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
+ target port ID of the SCSI device containing the SCSI logical unit to
+ reset. Transport drivers may chose to utilize a subset of this array to suit
+ the representation of their targets.
+ @param Lun The LUN of the SCSI device to reset.
+
+ @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+ @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
+ specified by Target and Lun.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruResetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun
+ )
+{
+ //
+ // Return success directly then upper layer driver could think reset target LUN operation is done.
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
+ be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
+ for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
+ see if a SCSI device is actually present at that location on the SCSI channel.
+
+ @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
+ @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
+ On output, a pointer to the Target ID (an array of
+ TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
+ channel. An input value of 0xF(all bytes in the array are 0xF) in the
+ Target array retrieves the Target ID of the first SCSI device present on a
+ SCSI channel.
+
+ @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
+ channel was returned in Target.
+ @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
+ @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
+ returned on a previous call to GetNextTarget().
+ @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruGetNextTarget (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target
+ )
+{
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+
+ Private = UFS_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
+
+ if (Target == NULL || *Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ SetMem (mUfsTargetId, TARGET_MAX_BYTES, 0xFF);
+ if (CompareMem(*Target, mUfsTargetId, TARGET_MAX_BYTES) == 0) {
+ SetMem (*Target, TARGET_MAX_BYTES, 0x00);
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Since ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruDriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHostController;
+
+ //
+ // Ufs Pass Thru driver is a device driver, and should ingore the
+ // "RemainingDevicePath" according to UEFI spec
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ (VOID *) &ParentDevicePath,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // EFI_ALREADY_STARTED is also an error
+ //
+ return Status;
+ }
+ //
+ // Close the protocol because we don't use it here
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEdkiiUfsHostControllerProtocolGuid,
+ (VOID **) &UfsHostController,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR (Status)) {
+ //
+ // EFI_ALREADY_STARTED is also an error
+ //
+ return Status;
+ }
+
+ //
+ // Close the I/O Abstraction(s) used to perform the supported test
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEdkiiUfsHostControllerProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruDriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+ UINTN UfsHcBase;
+ UINT32 Index;
+ UFS_CONFIG_DESC Config;
+
+ Status = EFI_SUCCESS;
+ UfsHc = NULL;
+ Private = NULL;
+ UfsHcBase = 0;
+
+ DEBUG ((EFI_D_INFO, "==UfsPassThru Start== Controller = %x\n", Controller));
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEdkiiUfsHostControllerProtocolGuid,
+ (VOID **) &UfsHc,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Open Ufs Host Controller Protocol Error, Status = %r\n", Status));
+ goto Error;
+ }
+
+ //
+ // Get the UFS Host Controller MMIO Bar Base Address.
+ //
+ Status = UfsHc->GetUfsHcMmioBar (UfsHc, &UfsHcBase);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Get Ufs Host Controller Mmio Bar Error, Status = %r\n", Status));
+ goto Error;
+ }
+
+ //
+ // Initialize Ufs Pass Thru private data for managed UFS Host Controller.
+ //
+ Private = AllocateCopyPool (sizeof (UFS_PASS_THRU_PRIVATE_DATA), &gUfsPassThruTemplate);
+ if (Private == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Error;
+ }
+
+ Private->ExtScsiPassThru.Mode = &Private->ExtScsiPassThruMode;
+ Private->UfsHostController = UfsHc;
+ Private->UfsHcBase = UfsHcBase;
+
+ //
+ // Initialize UFS Host Controller H/W.
+ //
+ Status = UfsControllerInit (Private);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Ufs Host Controller Initialization Error, Status = %r\n", Status));
+ goto Error;
+ }
+
+ //
+ // UFS 2.0 spec Section 13.1.3.3:
+ // At the end of the UFS Interconnect Layer initialization on both host and device side,
+ // the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
+ //
+ Status = UfsExecNopCmds (Private);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Ufs Sending NOP IN command Error, Status = %r\n", Status));
+ goto Error;
+ }
+
+ //
+ // The host enables the device initialization completion by setting fDeviceInit flag.
+ //
+ Status = UfsSetFlag (Private, UfsFlagDevInit);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Ufs Set fDeviceInit Flag Error, Status = %r\n", Status));
+ goto Error;
+ }
+
+ //
+ // Get Ufs Device's Lun Info by reading Configuration Descriptor.
+ //
+ Status = UfsRwDeviceDesc (Private, TRUE, UfsConfigDesc, 0, 0, &Config, sizeof (UFS_CONFIG_DESC));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Ufs Get Configuration Descriptor Error, Status = %r\n", Status));
+ goto Error;
+ }
+
+ //
+ // Check if 8 common luns are active and set corresponding bit mask.
+ // TODO: Parse device descriptor to decide if exposing RPMB LUN to upper layer for authentication access.
+ //
+ for (Index = 0; Index < 8; Index++) {
+ if (Config.UnitDescConfParams[Index].LunEn != 0) {
+ Private->Luns.BitMask |= (BIT0 << Index);
+ DEBUG ((EFI_D_INFO, "Ufs Lun %d is enabled\n", Index));
+ }
+ }
+
+ Status = gBS->InstallProtocolInterface (
+ &Controller,
+ &gEfiExtScsiPassThruProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &(Private->ExtScsiPassThru)
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return EFI_SUCCESS;
+
+Error:
+ if (Private != NULL) {
+ if (Private->TmrlMapping != NULL) {
+ UfsHc->Unmap (UfsHc, Private->TmrlMapping);
+ }
+ if (Private->UtpTmrlBase != NULL) {
+ UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (Private->Nutmrs * sizeof (UTP_TMRD)), Private->UtpTmrlBase);
+ }
+
+ if (Private->TrlMapping != NULL) {
+ UfsHc->Unmap (UfsHc, Private->TrlMapping);
+ }
+ if (Private->UtpTrlBase != NULL) {
+ UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (Private->Nutrs * sizeof (UTP_TMRD)), Private->UtpTrlBase);
+ }
+
+ FreePool (Private);
+ }
+
+ if (UfsHc != NULL) {
+ gBS->CloseProtocol (
+ Controller,
+ &gEdkiiUfsHostControllerProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ }
+
+ return Status;
+}
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+UfsPassThruDriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ UFS_PASS_THRU_PRIVATE_DATA *Private;
+ EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiPassThru;
+ EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
+
+ DEBUG ((EFI_D_INFO, "==UfsPassThru Stop== Controller Controller = %x\n", Controller));
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiExtScsiPassThruProtocolGuid,
+ (VOID **) &ExtScsiPassThru,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ Private = UFS_PASS_THRU_PRIVATE_DATA_FROM_THIS (ExtScsiPassThru);
+ UfsHc = Private->UfsHostController;
+
+ Status = gBS->UninstallProtocolInterface (
+ Controller,
+ &gEfiExtScsiPassThruProtocolGuid,
+ &(Private->ExtScsiPassThru)
+ );
+
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Stop Ufs Host Controller
+ //
+ Status = UfsControllerStop (Private);
+ ASSERT_EFI_ERROR (Status);
+
+ if (Private->TmrlMapping != NULL) {
+ UfsHc->Unmap (UfsHc, Private->TmrlMapping);
+ }
+ if (Private->UtpTmrlBase != NULL) {
+ UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (Private->Nutmrs * sizeof (UTP_TMRD)), Private->UtpTmrlBase);
+ }
+
+ if (Private->TrlMapping != NULL) {
+ UfsHc->Unmap (UfsHc, Private->TrlMapping);
+ }
+ if (Private->UtpTrlBase != NULL) {
+ UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (Private->Nutrs * sizeof (UTP_TMRD)), Private->UtpTrlBase);
+ }
+
+ FreePool (Private);
+
+ //
+ // Close protocols opened by UfsPassThru controller driver
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEdkiiUfsHostControllerProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return Status;
+}
+
+
+/**
+ The user Entry Point for module UfsPassThru. The user code starts with this function.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeUfsPassThru (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Install driver model protocol(s).
+ //
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gUfsPassThruDriverBinding,
+ ImageHandle,
+ &gUfsPassThruComponentName,
+ &gUfsPassThruComponentName2
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
|