diff options
Diffstat (limited to 'MdeModulePkg/Library/DxeNetLib')
| -rw-r--r-- | MdeModulePkg/Library/DxeNetLib/DxeNetLib.c | 245 |
1 files changed, 226 insertions, 19 deletions
diff --git a/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c b/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c index a5a6762985..5037243b37 100644 --- a/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c +++ b/MdeModulePkg/Library/DxeNetLib/DxeNetLib.c @@ -2146,6 +2146,213 @@ NetLibGetMacString ( }
/**
+ Detect media status for specified network device.
+
+ The underlying UNDI driver may or may not support reporting media status from
+ GET_STATUS command (PXE_STATFLAGS_GET_STATUS_NO_MEDIA_SUPPORTED). This routine
+ will try to invoke Snp->GetStatus() to get the media status: if media already
+ present, it return directly; if media not present, it will stop SNP and then
+ restart SNP to get the latest media status, this give chance to get the correct
+ media status for old UNDI driver which doesn't support reporting media status
+ from GET_STATUS command.
+ Note: there will be two limitations for current algorithm:
+ 1) for UNDI with this capability, in case of cable is not attached, there will
+ be an redundant Stop/Start() process;
+ 2) for UNDI without this capability, in case cable is attached in UNDI
+ initialize while unattached latter, NetLibDetectMedia() will report
+ MediaPresent as TRUE, this cause upper layer apps wait for timeout time.
+
+ @param[in] ServiceHandle The handle where network service binding protocols are
+ installed on.
+ @param[out] MediaPresent The pointer to store the media status.
+
+ @retval EFI_SUCCESS Media detection success.
+ @retval EFI_INVALID_PARAMETER ServiceHandle is not valid network device handle.
+ @retval EFI_UNSUPPORTED Network device does not support media detection.
+ @retval EFI_DEVICE_ERROR SNP is in unknown state.
+
+**/
+EFI_STATUS
+EFIAPI
+NetLibDetectMedia (
+ IN EFI_HANDLE ServiceHandle,
+ OUT BOOLEAN *MediaPresent
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE SnpHandle;
+ EFI_SIMPLE_NETWORK_PROTOCOL *Snp;
+ UINT32 InterruptStatus;
+ UINT32 OldState;
+ EFI_MAC_ADDRESS *MCastFilter;
+ UINT32 MCastFilterCount;
+ UINT32 EnableFilterBits;
+ UINT32 DisableFilterBits;
+ BOOLEAN ResetMCastFilters;
+
+ ASSERT (MediaPresent != NULL);
+
+ //
+ // Get SNP handle
+ //
+ Snp = NULL;
+ SnpHandle = NetLibGetSnpHandle (ServiceHandle, &Snp);
+ if (SnpHandle == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check whether SNP support media detection
+ //
+ if (!Snp->Mode->MediaPresentSupported) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Invoke Snp->GetStatus() to refresh MediaPresent field in SNP mode data
+ //
+ Status = Snp->GetStatus (Snp, &InterruptStatus, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Snp->Mode->MediaPresent) {
+ //
+ // Media is present, return directly
+ //
+ *MediaPresent = TRUE;
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Till now, GetStatus() report no media; while, in case UNDI not support
+ // reporting media status from GetStatus(), this media status may be incorrect.
+ // So, we will stop SNP and then restart it to get the correct media status.
+ //
+ OldState = Snp->Mode->State;
+ if (OldState >= EfiSimpleNetworkMaxState) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ MCastFilter = NULL;
+
+ if (OldState == EfiSimpleNetworkInitialized) {
+ //
+ // SNP is already in use, need Shutdown/Stop and then Start/Initialize
+ //
+
+ //
+ // Backup current SNP receive filter settings
+ //
+ EnableFilterBits = Snp->Mode->ReceiveFilterSetting;
+ DisableFilterBits = Snp->Mode->ReceiveFilterMask ^ EnableFilterBits;
+
+ ResetMCastFilters = TRUE;
+ MCastFilterCount = Snp->Mode->MCastFilterCount;
+ if (MCastFilterCount != 0) {
+ MCastFilter = AllocateCopyPool (
+ MCastFilterCount * sizeof (EFI_MAC_ADDRESS),
+ Snp->Mode->MCastFilter
+ );
+ ASSERT (MCastFilter != NULL);
+
+ ResetMCastFilters = FALSE;
+ }
+
+ //
+ // Shutdown/Stop the simple network
+ //
+ Status = Snp->Shutdown (Snp);
+ if (!EFI_ERROR (Status)) {
+ Status = Snp->Stop (Snp);
+ }
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ //
+ // Start/Initialize the simple network
+ //
+ Status = Snp->Start (Snp);
+ if (!EFI_ERROR (Status)) {
+ Status = Snp->Initialize (Snp, 0, 0);
+ }
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ //
+ // Here we get the correct media status
+ //
+ *MediaPresent = Snp->Mode->MediaPresent;
+
+ //
+ // Restore SNP receive filter settings
+ //
+ Status = Snp->ReceiveFilters (
+ Snp,
+ EnableFilterBits,
+ DisableFilterBits,
+ ResetMCastFilters,
+ MCastFilterCount,
+ MCastFilter
+ );
+
+ if (MCastFilter != NULL) {
+ FreePool (MCastFilter);
+ }
+
+ return Status;
+ }
+
+ //
+ // SNP is not in use, it's in state of EfiSimpleNetworkStopped or EfiSimpleNetworkStarted
+ //
+ if (OldState == EfiSimpleNetworkStopped) {
+ //
+ // SNP not start yet, start it
+ //
+ Status = Snp->Start (Snp);
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+ }
+
+ //
+ // Initialize the simple network
+ //
+ Status = Snp->Initialize (Snp, 0, 0);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Exit;
+ }
+
+ //
+ // Here we get the correct media status
+ //
+ *MediaPresent = Snp->Mode->MediaPresent;
+
+ //
+ // Shut down the simple network
+ //
+ Snp->Shutdown (Snp);
+
+Exit:
+ if (OldState == EfiSimpleNetworkStopped) {
+ //
+ // Original SNP sate is Stopped, restore to original state
+ //
+ Snp->Stop (Snp);
+ }
+
+ if (MCastFilter != NULL) {
+ FreePool (MCastFilter);
+ }
+
+ return Status;
+}
+
+/**
Check the default address used by the IPv4 driver is static or dynamic (acquired
from DHCP).
@@ -2417,7 +2624,7 @@ NetLibGetNicHandle ( @param[in] String The pointer to the Ascii string.
@param[out] Ip4Address The pointer to the converted IPv4 address.
- @retval EFI_SUCCESS Convert to IPv4 address successfully.
+ @retval EFI_SUCCESS Convert to IPv4 address successfully.
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip4Address is NULL.
**/
@@ -2460,7 +2667,7 @@ NetLibAsciiStrToIp4 ( //
// Convert the string to IPv4 address. AsciiStrDecimalToUintn stops at the
- // first character that is not a valid decimal character, '.' or '\0' here.
+ // first character that is not a valid decimal character, '.' or '\0' here.
//
NodeVal = AsciiStrDecimalToUintn (TempStr);
if (NodeVal > 0xFF) {
@@ -2483,7 +2690,7 @@ NetLibAsciiStrToIp4 ( @param[in] String The pointer to the Ascii string.
@param[out] Ip6Address The pointer to the converted IPv6 address.
- @retval EFI_SUCCESS Convert to IPv6 address successfully.
+ @retval EFI_SUCCESS Convert to IPv6 address successfully.
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip6Address is NULL.
**/
@@ -2519,7 +2726,7 @@ NetLibAsciiStrToIp6 ( return EFI_INVALID_PARAMETER;
} else {
AllowedCnt = 7;
- }
+ }
}
ZeroMem (Ip6Address, sizeof (EFI_IPv6_ADDRESS));
@@ -2547,7 +2754,7 @@ NetLibAsciiStrToIp6 ( // ::0 looks strange. report error to user.
//
return EFI_INVALID_PARAMETER;
- }
+ }
//
// Skip the abbreviation part of IPv6 address.
@@ -2561,7 +2768,7 @@ NetLibAsciiStrToIp6 ( //
return EFI_INVALID_PARAMETER;
}
-
+
TailNodeCnt++;
if (TailNodeCnt >= (AllowedCnt - NodeCnt)) {
//
@@ -2572,7 +2779,7 @@ NetLibAsciiStrToIp6 ( }
TempStr2++;
- }
+ }
Short = TRUE;
Update = TRUE;
@@ -2587,12 +2794,12 @@ NetLibAsciiStrToIp6 ( //
return EFI_INVALID_PARAMETER;
}
- }
- }
+ }
+ }
//
// Convert the string to IPv6 address. AsciiStrHexToUintn stops at the first
- // character that is not a valid hexadecimal character, ':' or '\0' here.
+ // character that is not a valid hexadecimal character, ':' or '\0' here.
//
NodeVal = AsciiStrHexToUintn (TempStr);
if ((NodeVal > 0xFFFF) || (Index > 14)) {
@@ -2625,7 +2832,7 @@ NetLibAsciiStrToIp6 ( @param[in] String The pointer to the Ascii string.
@param[out] Ip4Address The pointer to the converted IPv4 address.
- @retval EFI_SUCCESS Convert to IPv4 address successfully.
+ @retval EFI_SUCCESS Convert to IPv4 address successfully.
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip4Address is NULL.
@retval EFI_OUT_OF_RESOURCES Fail to perform the operation due to lack of resource.
@@ -2638,7 +2845,7 @@ NetLibStrToIp4 ( {
CHAR8 *Ip4Str;
EFI_STATUS Status;
-
+
if ((String == NULL) || (Ip4Address == NULL)) {
return EFI_INVALID_PARAMETER;
}
@@ -2665,7 +2872,7 @@ NetLibStrToIp4 ( @param[in] String The pointer to the Ascii string.
@param[out] Ip6Address The pointer to the converted IPv6 address.
- @retval EFI_SUCCESS Convert to IPv6 address successfully.
+ @retval EFI_SUCCESS Convert to IPv6 address successfully.
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip6Address is NULL.
@retval EFI_OUT_OF_RESOURCES Fail to perform the operation due to lack of resource.
@@ -2674,11 +2881,11 @@ EFI_STATUS NetLibStrToIp6 (
IN CONST CHAR16 *String,
OUT EFI_IPv6_ADDRESS *Ip6Address
- )
+ )
{
CHAR8 *Ip6Str;
EFI_STATUS Status;
-
+
if ((String == NULL) || (Ip6Address == NULL)) {
return EFI_INVALID_PARAMETER;
}
@@ -2706,7 +2913,7 @@ NetLibStrToIp6 ( @param[out] Ip6Address The pointer to the converted IPv6 address.
@param[out] PrefixLength The pointer to the converted prefix length.
- @retval EFI_SUCCESS Convert to IPv6 address successfully.
+ @retval EFI_SUCCESS Convert to IPv6 address successfully.
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip6Address is NULL.
@retval EFI_OUT_OF_RESOURCES Fail to perform the operation due to lack of resource.
@@ -2716,14 +2923,14 @@ NetLibStrToIp6andPrefix ( IN CONST CHAR16 *String,
OUT EFI_IPv6_ADDRESS *Ip6Address,
OUT UINT8 *PrefixLength
- )
+ )
{
- CHAR8 *Ip6Str;
+ CHAR8 *Ip6Str;
CHAR8 *PrefixStr;
CHAR8 *TempStr;
EFI_STATUS Status;
UINT8 Length;
-
+
if ((String == NULL) || (Ip6Address == NULL) || (PrefixLength == NULL)) {
return EFI_INVALID_PARAMETER;
}
|