diff options
Diffstat (limited to 'MdeModulePkg/Library/UefiBootManagerLib/BmConnect.c')
-rw-r--r-- | MdeModulePkg/Library/UefiBootManagerLib/BmConnect.c | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/MdeModulePkg/Library/UefiBootManagerLib/BmConnect.c b/MdeModulePkg/Library/UefiBootManagerLib/BmConnect.c new file mode 100644 index 0000000000..0172f959d7 --- /dev/null +++ b/MdeModulePkg/Library/UefiBootManagerLib/BmConnect.c @@ -0,0 +1,318 @@ +/** @file + Library functions which relate with connecting the device. + +Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.<BR> +This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include "InternalBm.h" + +/** + Connect all the drivers to all the controllers. + + This function makes sure all the current system drivers manage the correspoinding + controllers if have. And at the same time, makes sure all the system controllers + have driver to manage it if have. +**/ +VOID +BmConnectAllDriversToAllControllers ( + VOID + ) +{ + EFI_STATUS Status; + UINTN HandleCount; + EFI_HANDLE *HandleBuffer; + UINTN Index; + + do { + // + // Connect All EFI 1.10 drivers following EFI 1.10 algorithm + // + gBS->LocateHandleBuffer ( + AllHandles, + NULL, + NULL, + &HandleCount, + &HandleBuffer + ); + + for (Index = 0; Index < HandleCount; Index++) { + gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE); + } + + if (HandleBuffer != NULL) { + FreePool (HandleBuffer); + } + + // + // Check to see if it's possible to dispatch an more DXE drivers. + // The above code may have made new DXE drivers show up. + // If any new driver is dispatched (Status == EFI_SUCCESS) and we will try + // the connect again. + // + Status = gDS->Dispatch (); + + } while (!EFI_ERROR (Status)); +} + +/** + This function will connect all the system driver to controller + first, and then special connect the default console, this make + sure all the system controller available and the platform default + console connected. + +**/ +VOID +EFIAPI +EfiBootManagerConnectAll ( + VOID + ) +{ + // + // Connect the platform console first + // + EfiBootManagerConnectAllDefaultConsoles (); + + // + // Generic way to connect all the drivers + // + BmConnectAllDriversToAllControllers (); + + // + // Here we have the assumption that we have already had + // platform default console + // + EfiBootManagerConnectAllDefaultConsoles (); +} + +/** + This function will create all handles associate with every device + path node. If the handle associate with one device path node can not + be created successfully, then still give chance to do the dispatch, + which load the missing drivers if possible. + + @param DevicePathToConnect The device path which will be connected, it can be + a multi-instance device path + @param MatchingHandle Return the controller handle closest to the DevicePathToConnect + + @retval EFI_SUCCESS All handles associate with every device path node + have been created + @retval EFI_OUT_OF_RESOURCES There is no resource to create new handles + @retval EFI_NOT_FOUND Create the handle associate with one device path + node failed + +**/ +EFI_STATUS +EFIAPI +EfiBootManagerConnectDevicePath ( + IN EFI_DEVICE_PATH_PROTOCOL *DevicePathToConnect, + OUT EFI_HANDLE *MatchingHandle OPTIONAL + ) +{ + EFI_STATUS Status; + EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath; + EFI_HANDLE Handle; + EFI_HANDLE PreviousHandle; + EFI_TPL CurrentTpl; + + if (DevicePathToConnect == NULL) { + return EFI_INVALID_PARAMETER; + } + + CurrentTpl = EfiGetCurrentTpl (); + // + // Start the real work of connect with RemainingDevicePath + // + PreviousHandle = NULL; + do { + // + // Find the handle that best matches the Device Path. If it is only a + // partial match the remaining part of the device path is returned in + // RemainingDevicePath. + // + RemainingDevicePath = DevicePathToConnect; + Status = gBS->LocateDevicePath (&gEfiDevicePathProtocolGuid, &RemainingDevicePath, &Handle); + if (!EFI_ERROR (Status)) { + if (Handle == PreviousHandle) { + // + // If no forward progress is made try invoking the Dispatcher. + // A new FV may have been added to the system an new drivers + // may now be found. + // Status == EFI_SUCCESS means a driver was dispatched + // Status == EFI_NOT_FOUND means no new drivers were dispatched + // + if (CurrentTpl == TPL_APPLICATION) { + Status = gDS->Dispatch (); + } else { + // + // Always return EFI_NOT_FOUND here + // to prevent dead loop when control handle is found but connection failded case + // + Status = EFI_NOT_FOUND; + } + } + + + if (!EFI_ERROR (Status)) { + PreviousHandle = Handle; + // + // Connect all drivers that apply to Handle and RemainingDevicePath, + // the Recursive flag is FALSE so only one level will be expanded. + // + // Do not check the connect status here, if the connect controller fail, + // then still give the chance to do dispatch, because partial + // RemainingDevicepath may be in the new FV + // + // 1. If the connect fail, RemainingDevicepath and handle will not + // change, so next time will do the dispatch, then dispatch's status + // will take effect + // 2. If the connect success, the RemainingDevicepath and handle will + // change, then avoid the dispatch, we have chance to continue the + // next connection + // + gBS->ConnectController (Handle, NULL, RemainingDevicePath, FALSE); + if (MatchingHandle != NULL) { + *MatchingHandle = Handle; + } + } + } + // + // Loop until RemainingDevicePath is an empty device path + // + } while (!EFI_ERROR (Status) && !IsDevicePathEnd (RemainingDevicePath)); + + ASSERT (EFI_ERROR (Status) || IsDevicePathEnd (RemainingDevicePath)); + + return Status; +} + +/** + This function will disconnect all current system handles. + + gBS->DisconnectController() is invoked for each handle exists in system handle buffer. + If handle is a bus type handle, all childrens also are disconnected recursively by + gBS->DisconnectController(). +**/ +VOID +EFIAPI +EfiBootManagerDisconnectAll ( + VOID + ) +{ + UINTN HandleCount; + EFI_HANDLE *HandleBuffer; + UINTN Index; + + // + // Disconnect all + // + gBS->LocateHandleBuffer ( + AllHandles, + NULL, + NULL, + &HandleCount, + &HandleBuffer + ); + for (Index = 0; Index < HandleCount; Index++) { + gBS->DisconnectController (HandleBuffer[Index], NULL, NULL); + } + + if (HandleBuffer != NULL) { + FreePool (HandleBuffer); + } +} + +/** + Connect the specific Usb device which match the short form device path, + and whose bus is determined by Host Controller (Uhci or Ehci). + + @param DevicePath A short-form device path that starts with the first + element being a USB WWID or a USB Class device + path + + @return EFI_INVALID_PARAMETER DevicePath is NULL pointer. + DevicePath is not a USB device path. + + @return EFI_SUCCESS Success to connect USB device + @return EFI_NOT_FOUND Fail to find handle for USB controller to connect. + +**/ +EFI_STATUS +BmConnectUsbShortFormDevicePath ( + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath + ) +{ + EFI_STATUS Status; + EFI_HANDLE *Handles; + UINTN HandleCount; + UINTN Index; + EFI_PCI_IO_PROTOCOL *PciIo; + UINT8 Class[3]; + BOOLEAN AtLeastOneConnected; + + // + // Check the passed in parameters + // + if (DevicePath == NULL) { + return EFI_INVALID_PARAMETER; + } + + if ((DevicePathType (DevicePath) != MESSAGING_DEVICE_PATH) || + ((DevicePathSubType (DevicePath) != MSG_USB_CLASS_DP) && (DevicePathSubType (DevicePath) != MSG_USB_WWID_DP)) + ) { + return EFI_INVALID_PARAMETER; + } + + // + // Find the usb host controller firstly, then connect with the remaining device path + // + AtLeastOneConnected = FALSE; + Status = gBS->LocateHandleBuffer ( + ByProtocol, + &gEfiPciIoProtocolGuid, + NULL, + &HandleCount, + &Handles + ); + if (!EFI_ERROR (Status)) { + for (Index = 0; Index < HandleCount; Index++) { + Status = gBS->HandleProtocol ( + Handles[Index], + &gEfiPciIoProtocolGuid, + (VOID **) &PciIo + ); + if (!EFI_ERROR (Status)) { + // + // Check whether the Pci device is the wanted usb host controller + // + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x09, 3, &Class); + if (!EFI_ERROR (Status) && + ((PCI_CLASS_SERIAL == Class[2]) && (PCI_CLASS_SERIAL_USB == Class[1])) + ) { + Status = gBS->ConnectController ( + Handles[Index], + NULL, + DevicePath, + FALSE + ); + if (!EFI_ERROR(Status)) { + AtLeastOneConnected = TRUE; + } + } + } + } + + if (Handles != NULL) { + FreePool (Handles); + } + } + + return AtLeastOneConnected ? EFI_SUCCESS : EFI_NOT_FOUND; +} |