diff options
Diffstat (limited to 'MdePkg/Include/Protocol/PciIo.h')
| -rw-r--r-- | MdePkg/Include/Protocol/PciIo.h | 503 |
1 files changed, 503 insertions, 0 deletions
diff --git a/MdePkg/Include/Protocol/PciIo.h b/MdePkg/Include/Protocol/PciIo.h new file mode 100644 index 0000000000..147f6b2441 --- /dev/null +++ b/MdePkg/Include/Protocol/PciIo.h @@ -0,0 +1,503 @@ +/** @file
+ EFI PCI I/O Protocol
+
+ Copyright (c) 2006, Intel Corporation
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ Module Name: PciIo.h
+
+**/
+
+#ifndef __PCI_IO_H__
+#define __PCI_IO_H__
+
+//
+// Global ID for the PCI I/O Protocol
+//
+#define EFI_PCI_IO_PROTOCOL_GUID \
+ { \
+ 0x4cf5b200, 0x68b8, 0x4ca5, {0x9e, 0xec, 0xb2, 0x3e, 0x3f, 0x50, 0x2, 0x9a } \
+ }
+
+typedef struct _EFI_PCI_IO_PROTOCOL EFI_PCI_IO_PROTOCOL;
+
+//
+// Prototypes for the PCI I/O Protocol
+//
+typedef enum {
+ EfiPciIoWidthUint8 = 0,
+ EfiPciIoWidthUint16,
+ EfiPciIoWidthUint32,
+ EfiPciIoWidthUint64,
+ EfiPciIoWidthFifoUint8,
+ EfiPciIoWidthFifoUint16,
+ EfiPciIoWidthFifoUint32,
+ EfiPciIoWidthFifoUint64,
+ EfiPciIoWidthFillUint8,
+ EfiPciIoWidthFillUint16,
+ EfiPciIoWidthFillUint32,
+ EfiPciIoWidthFillUint64,
+ EfiPciIoWidthMaximum
+} EFI_PCI_IO_PROTOCOL_WIDTH;
+
+//
+// Complete PCI address generater
+//
+#define EFI_PCI_IO_PASS_THROUGH_BAR 0xff // Special BAR that passes a memory or I/O cycle through unchanged
+#define EFI_PCI_IO_ATTRIBUTE_MASK 0x077f // All the following I/O and Memory cycles
+#define EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO 0x0001 // I/O cycles 0x0000-0x00FF (10 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_ISA_IO 0x0002 // I/O cycles 0x0100-0x03FF or greater (10 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO 0x0004 // I/O cycles 0x3C6, 0x3C8, 0x3C9 (10 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY 0x0008 // MEM cycles 0xA0000-0xBFFFF (24 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_VGA_IO 0x0010 // I/O cycles 0x3B0-0x3BB and 0x3C0-0x3DF (10 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO 0x0020 // I/O cycles 0x1F0-0x1F7, 0x3F6, 0x3F7 (10 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO 0x0040 // I/O cycles 0x170-0x177, 0x376, 0x377 (10 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x0080 // Map a memory range so write are combined
+#define EFI_PCI_IO_ATTRIBUTE_IO 0x0100 // Enable the I/O decode bit in the PCI Config Header
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY 0x0200 // Enable the Memory decode bit in the PCI Config Header
+#define EFI_PCI_IO_ATTRIBUTE_BUS_MASTER 0x0400 // Enable the DMA bit in the PCI Config Header
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED 0x0800 // Map a memory range so all r/w accesses are cached
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY_DISABLE 0x1000 // Disable a memory range
+#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE 0x2000 // Clear for an add-in PCI Device
+#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM 0x4000 // Clear for a physical PCI Option ROM accessed through ROM BAR
+#define EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE 0x8000 // Clear for PCI controllers that can not genrate a DAC
+#define EFI_PCI_IO_ATTRIBUTE_ISA_IO_16 0x10000 // I/O cycles 0x0100-0x03FF or greater (16 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16 0x20000 // I/O cycles 0x3C6, 0x3C8, 0x3C9 (16 bit decode)
+#define EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 0x30000 // I/O cycles 0x3B0-0x3BB and 0x3C0-0x3DF (16 bit decode)
+
+#define EFI_PCI_DEVICE_ENABLE (EFI_PCI_IO_ATTRIBUTE_IO | EFI_PCI_IO_ATTRIBUTE_MEMORY | EFI_PCI_IO_ATTRIBUTE_BUS_MASTER)
+#define EFI_VGA_DEVICE_ENABLE (EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO | EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY | EFI_PCI_IO_ATTRIBUTE_VGA_IO | EFI_PCI_IO_ATTRIBUTE_IO)
+
+//
+// *******************************************************
+// EFI_PCI_IO_PROTOCOL_OPERATION
+// *******************************************************
+//
+typedef enum {
+ EfiPciIoOperationBusMasterRead,
+ EfiPciIoOperationBusMasterWrite,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ EfiPciIoOperationMaximum
+} EFI_PCI_IO_PROTOCOL_OPERATION;
+
+//
+// *******************************************************
+// EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION
+// *******************************************************
+//
+typedef enum {
+ EfiPciIoAttributeOperationGet,
+ EfiPciIoAttributeOperationSet,
+ EfiPciIoAttributeOperationEnable,
+ EfiPciIoAttributeOperationDisable,
+ EfiPciIoAttributeOperationSupported,
+ EfiPciIoAttributeOperationMaximum
+} EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION;
+
+/**
+ Reads from the memory space of a PCI controller. Returns when either the polling exit criteria is
+ satisfied or after a defined duration.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param Offset The offset within the selected BAR to start the memory operation.
+ @param Mask Mask used for the polling criteria.
+ @param Value The comparison value used for the polling exit criteria.
+ @param Delay The number of 100 ns units to poll.
+ @param Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
+ @retval EFI_UNSUPPORTED Offset is not valid for the BarIndex of this PCI controller.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_POLL_IO_MEM) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
+ IN UINT8 BarIndex,
+ IN UINT64 Offset,
+ IN UINT64 Mask,
+ IN UINT64 Value,
+ IN UINT64 Delay,
+ OUT UINT64 *Result
+ );
+
+/**
+ Enable a PCI driver to access PCI controller registers in the PCI memory or I/O space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory or I/O operations.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for the memory or I/O operation to perform.
+ @param Offset The offset within the selected BAR to start the memory or I/O operation.
+ @param Count The number of memory or I/O operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI controller.
+ @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
+ @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
+ valid for the PCI BAR specified by BarIndex.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_IO_MEM) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
+ IN UINT8 BarIndex,
+ IN UINT64 Offset,
+ IN UINTN Count,
+ IN OUT VOID *Buffer
+ );
+
+typedef struct {
+ EFI_PCI_IO_PROTOCOL_IO_MEM Read;
+ EFI_PCI_IO_PROTOCOL_IO_MEM Write;
+} EFI_PCI_IO_PROTOCOL_ACCESS;
+
+/**
+ Enable a PCI driver to access PCI controller registers in PCI configuration space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory operations.
+ @param Offset The offset within the PCI configuration space for the PCI controller.
+ @param Count The number of PCI configuration operations to perform.
+ @param Buffer For read operations, the destination buffer to store the results. For write
+ operations, the source buffer to write data from.
+
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI controller.
+ @retval EFI_UNSUPPORTED The address range specified by Offset, Width, and Count is not
+ valid for the PCI configuration header of the PCI controller.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL or Width is invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_CONFIG) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
+ IN UINT32 Offset,
+ IN UINTN Count,
+ IN OUT VOID *Buffer
+ );
+
+typedef struct {
+ EFI_PCI_IO_PROTOCOL_CONFIG Read;
+ EFI_PCI_IO_PROTOCOL_CONFIG Write;
+} EFI_PCI_IO_PROTOCOL_CONFIG_ACCESS;
+
+/**
+ Enables a PCI driver to copy one region of PCI memory space to another region of PCI
+ memory space.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Width Signifies the width of the memory operations.
+ @param DestBarIndex The BAR index in the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param DestOffset The destination offset within the BAR specified by DestBarIndex to
+ start the memory writes for the copy operation.
+ @param SrcBarIndex The BAR index in the standard PCI Configuration header to use as the
+ base address for the memory operation to perform.
+ @param SrcOffset The source offset within the BAR specified by SrcBarIndex to start
+ the memory reads for the copy operation.
+ @param Count The number of memory operations to perform. Bytes moved is Width
+ size * Count, starting at DestOffset and SrcOffset.
+
+ @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
+ @retval EFI_UNSUPPORTED DestBarIndex not valid for this PCI controller.
+ @retval EFI_UNSUPPORTED SrcBarIndex not valid for this PCI controller.
+ @retval EFI_UNSUPPORTED The address range specified by DestOffset, Width, and Count
+ is not valid for the PCI BAR specified by DestBarIndex.
+ @retval EFI_UNSUPPORTED The address range specified by SrcOffset, Width, and Count is
+ not valid for the PCI BAR specified by SrcBarIndex.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_COPY_MEM) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN EFI_PCI_IO_PROTOCOL_WIDTH Width,
+ IN UINT8 DestBarIndex,
+ IN UINT64 DestOffset,
+ IN UINT8 SrcBarIndex,
+ IN UINT64 SrcOffset,
+ IN UINTN Count
+ );
+
+/**
+ Provides the PCI controller-Cspecific addresses needed to access system memory.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_MAP) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN EFI_PCI_IO_PROTOCOL_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+ @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_UNMAP) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN VOID *Mapping
+ );
+
+/**
+ Allocates pages that are suitable for an EfiPciIoOperationBusMasterCommonBuffer
+ mapping.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or
+ EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_ALLOCATE_BUFFER) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ IN UINT64 Attributes
+ );
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+ was not allocated with AllocateBuffer().
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_FREE_BUFFER) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN UINTN Pages,
+ IN VOID *HostAddress
+ );
+
+/**
+ Flushes all PCI posted write transactions from a PCI host bridge to system memory.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
+ bridge to system memory.
+ @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
+ host bridge due to a hardware error.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_FLUSH) (
+ IN EFI_PCI_IO_PROTOCOL *This
+ );
+
+/**
+ Retrieves this PCI controller's current PCI bus number, device number, and function number.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param SegmentNumber The PCI controller's current PCI segment number.
+ @param BusNumber The PCI controller's current PCI bus number.
+ @param DeviceNumber The PCI controller's current PCI device number.
+ @param FunctionNumber The PCI controller's current PCI function number.
+
+ @retval EFI_SUCCESS The PCI controller location was returned.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_GET_LOCATION) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ OUT UINTN *SegmentNumber,
+ OUT UINTN *BusNumber,
+ OUT UINTN *DeviceNumber,
+ OUT UINTN *FunctionNumber
+ );
+
+/**
+ Performs an operation on the attributes that this PCI controller supports. The operations include
+ getting the set of supported attributes, retrieving the current attributes, setting the current
+ attributes, enabling attributes, and disabling attributes.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Operation The operation to perform on the attributes for this PCI controller.
+ @param Attributes The mask of attributes that are used for Set, Enable, and Disable
+ operations.
+ @param Result A pointer to the result mask of attributes that are returned for the Get
+ and Supported operations.
+
+ @retval EFI_SUCCESS The operation on the PCI controller's attributes was completed.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_UNSUPPORTED one or more of the bits set in
+ Attributes are not supported by this PCI controller or one of
+ its parent bridges when Operation is Set, Enable or Disable.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_ATTRIBUTES) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation,
+ IN UINT64 Attributes,
+ OUT UINT64 *Result OPTIONAL
+ );
+
+/**
+ Gets the attributes that this PCI controller supports setting on a BAR using
+ SetBarAttributes(), and retrieves the list of resource descriptors for a BAR.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for resource range. The legal range for this field is 0..5.
+ @param Supports A pointer to the mask of attributes that this PCI controller supports
+ setting for this BAR with SetBarAttributes().
+ @param Resources A pointer to the ACPI 2.0 resource descriptors that describe the current
+ configuration of this BAR of the PCI controller.
+
+ @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI
+ controller supports are returned in Supports. If Resources
+ is not NULL, then the ACPI 2.0 resource descriptors that the PCI
+ controller is currently using are returned in Resources.
+ @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
+ @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to allocate
+ Resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_GET_BAR_ATTRIBUTES) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN UINT8 BarIndex,
+ OUT UINT64 *Supports, OPTIONAL
+ OUT VOID **Resources OPTIONAL
+ );
+
+/**
+ Sets the attributes for a range of a BAR on a PCI controller.
+
+ @param This A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param Attributes The mask of attributes to set for the resource range specified by
+ BarIndex, Offset, and Length.
+ @param BarIndex The BAR index of the standard PCI Configuration header to use as the
+ base address for resource range. The legal range for this field is 0..5.
+ @param Offset A pointer to the BAR relative base address of the resource range to be
+ modified by the attributes specified by Attributes.
+ @param Length A pointer to the length of the resource range to be modified by the
+ attributes specified by Attributes.
+
+ @retval EFI_SUCCESS The set of attributes specified by Attributes for the resource
+ range specified by BarIndex, Offset, and Length were
+ set on the PCI controller, and the actual resource range is returned
+ in Offset and Length.
+ @retval EFI_INVALID_PARAMETER Offset or Length is NULL.
+ @retval EFI_UNSUPPORTED BarIndex not valid for this PCI controller.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to set the attributes on the
+ resource range specified by BarIndex, Offset, and
+ Length.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PCI_IO_PROTOCOL_SET_BAR_ATTRIBUTES) (
+ IN EFI_PCI_IO_PROTOCOL *This,
+ IN UINT64 Attributes,
+ IN UINT8 BarIndex,
+ IN OUT UINT64 *Offset,
+ IN OUT UINT64 *Length
+ );
+
+//
+// Interface structure for the PCI I/O Protocol
+//
+struct _EFI_PCI_IO_PROTOCOL {
+ EFI_PCI_IO_PROTOCOL_POLL_IO_MEM PollMem;
+ EFI_PCI_IO_PROTOCOL_POLL_IO_MEM PollIo;
+ EFI_PCI_IO_PROTOCOL_ACCESS Mem;
+ EFI_PCI_IO_PROTOCOL_ACCESS Io;
+ EFI_PCI_IO_PROTOCOL_CONFIG_ACCESS Pci;
+ EFI_PCI_IO_PROTOCOL_COPY_MEM CopyMem;
+ EFI_PCI_IO_PROTOCOL_MAP Map;
+ EFI_PCI_IO_PROTOCOL_UNMAP Unmap;
+ EFI_PCI_IO_PROTOCOL_ALLOCATE_BUFFER AllocateBuffer;
+ EFI_PCI_IO_PROTOCOL_FREE_BUFFER FreeBuffer;
+ EFI_PCI_IO_PROTOCOL_FLUSH Flush;
+ EFI_PCI_IO_PROTOCOL_GET_LOCATION GetLocation;
+ EFI_PCI_IO_PROTOCOL_ATTRIBUTES Attributes;
+ EFI_PCI_IO_PROTOCOL_GET_BAR_ATTRIBUTES GetBarAttributes;
+ EFI_PCI_IO_PROTOCOL_SET_BAR_ATTRIBUTES SetBarAttributes;
+ UINT64 RomSize;
+ VOID *RomImage;
+};
+
+extern EFI_GUID gEfiPciIoProtocolGuid;
+
+#endif
|