diff options
Diffstat (limited to 'MdePkg/Library/BaseS3SmbusLib/S3SmbusLib.c')
-rw-r--r-- | MdePkg/Library/BaseS3SmbusLib/S3SmbusLib.c | 502 |
1 files changed, 0 insertions, 502 deletions
diff --git a/MdePkg/Library/BaseS3SmbusLib/S3SmbusLib.c b/MdePkg/Library/BaseS3SmbusLib/S3SmbusLib.c deleted file mode 100644 index 1a7e0aef64..0000000000 --- a/MdePkg/Library/BaseS3SmbusLib/S3SmbusLib.c +++ /dev/null @@ -1,502 +0,0 @@ -/** @file
- Smbus Library Services that do SMBus transactions and also enable the operatation
- to be replayed during an S3 resume. This library class maps directly on top
- of the SmbusLib class.
-
- Copyright (c) 2007, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions
- of the BSD License which accompanies this distribution. The
- full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include <Base.h>
-
-#include <Library/DebugLib.h>
-#include <Library/S3BootScriptLib.h>
-#include <Library/SmbusLib.h>
-#include <Library/S3SmbusLib.h>
-
-/**
- Saves an SMBus operation to S3 script to be replayed on S3 resume.
-
- This function provides a standard way to save SMBus operation to S3 boot Script.
- The data can either be of the Length byte, word, or a block of data.
- If it falis to save S3 boot script, then ASSERT ().
-
- @param SmbusOperation Signifies which particular SMBus hardware protocol instance that it will use to
- execute the SMBus transactions.
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Length Signifies the number of bytes that this operation will do. The maximum number of
- bytes can be revision specific and operation specific.
- @param Buffer Contains the value of data to execute to the SMBus slave device. Not all operations
- require this argument. The length of this buffer is identified by Length.
-
-**/
-VOID
-InternalSaveSmBusExecToBootScript (
- IN EFI_SMBUS_OPERATION SmbusOperation,
- IN UINTN SmBusAddress,
- IN UINTN Length,
- IN OUT VOID *Buffer
- )
-{
- RETURN_STATUS Status;
-
- Status = S3BootScriptSaveSmbusExecute (
- SmBusAddress,
- SmbusOperation,
- &Length,
- Buffer
- );
- ASSERT (Status == RETURN_SUCCESS);
-}
-
-/**
- Executes an SMBUS quick read command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress.
- Only the SMBUS slave address field of SmBusAddress is required.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If PEC is set in SmBusAddress, then ASSERT().
- If Command in SmBusAddress is not zero, then ASSERT().
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
-**/
-VOID
-EFIAPI
-S3SmBusQuickRead (
- IN UINTN SmBusAddress,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- SmBusQuickRead (SmBusAddress, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusQuickRead, SmBusAddress, 0, NULL);
-}
-
-/**
- Executes an SMBUS quick write command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress.
- Only the SMBUS slave address field of SmBusAddress is required.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If PEC is set in SmBusAddress, then ASSERT().
- If Command in SmBusAddress is not zero, then ASSERT().
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
-**/
-VOID
-EFIAPI
-S3SmBusQuickWrite (
- IN UINTN SmBusAddress,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- SmBusQuickWrite (SmBusAddress, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusQuickWrite, SmBusAddress, 0, NULL);
-}
-
-/**
- Executes an SMBUS receive byte command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress.
- Only the SMBUS slave address field of SmBusAddress is required.
- The byte received from the SMBUS is returned.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Command in SmBusAddress is not zero, then ASSERT().
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The byte received from the SMBUS.
-
-**/
-UINT8
-EFIAPI
-S3SmBusReceiveByte (
- IN UINTN SmBusAddress,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINT8 Byte;
-
- Byte = SmBusReceiveByte (SmBusAddress, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusReceiveByte, SmBusAddress, 1, &Byte);
-
- return Byte;
-}
-
-/**
- Executes an SMBUS send byte command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress.
- The byte specified by Value is sent.
- Only the SMBUS slave address field of SmBusAddress is required. Value is returned.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Command in SmBusAddress is not zero, then ASSERT().
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Value The 8-bit value to send.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The parameter of Value.
-
-**/
-UINT8
-EFIAPI
-S3SmBusSendByte (
- IN UINTN SmBusAddress,
- IN UINT8 Value,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINT8 Byte;
-
- Byte = SmBusSendByte (SmBusAddress, Value, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusSendByte, SmBusAddress, 1, &Byte);
-
- return Byte;
-}
-
-/**
- Executes an SMBUS read data byte command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress.
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
- The 8-bit value read from the SMBUS is returned.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The byte read from the SMBUS.
-
-**/
-UINT8
-EFIAPI
-S3SmBusReadDataByte (
- IN UINTN SmBusAddress,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINT8 Byte;
-
- Byte = SmBusReadDataByte (SmBusAddress, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusReadByte, SmBusAddress, 1, &Byte);
-
- return Byte;
-}
-
-/**
- Executes an SMBUS write data byte command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress.
- The 8-bit value specified by Value is written.
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
- Value is returned.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Value The 8-bit value to write.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The parameter of Value.
-
-**/
-UINT8
-EFIAPI
-S3SmBusWriteDataByte (
- IN UINTN SmBusAddress,
- IN UINT8 Value,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINT8 Byte;
-
- Byte = SmBusWriteDataByte (SmBusAddress, Value, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusWriteByte, SmBusAddress, 1, &Byte);
-
- return Byte;
-}
-
-/**
- Executes an SMBUS read data word command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress.
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
- The 16-bit value read from the SMBUS is returned.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The byte read from the SMBUS.
-
-**/
-UINT16
-EFIAPI
-S3SmBusReadDataWord (
- IN UINTN SmBusAddress,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINT16 Word;
-
- Word = SmBusReadDataWord (SmBusAddress, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusReadWord, SmBusAddress, 2, &Word);
-
- return Word;
-}
-
-/**
- Executes an SMBUS write data word command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress.
- The 16-bit value specified by Value is written.
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
- Value is returned.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Value The 16-bit value to write.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The parameter of Value.
-
-**/
-UINT16
-EFIAPI
-S3SmBusWriteDataWord (
- IN UINTN SmBusAddress,
- IN UINT16 Value,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINT16 Word;
-
- Word = SmBusWriteDataWord (SmBusAddress, Value, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusWriteWord, SmBusAddress, 2, &Word);
-
- return Word;
-}
-
-/**
- Executes an SMBUS process call command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress.
- The 16-bit value specified by Value is written.
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
- The 16-bit value returned by the process call command is returned.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Length in SmBusAddress is not zero, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Value The 16-bit value to write.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The 16-bit value returned by the process call command.
-
-**/
-UINT16
-EFIAPI
-S3SmBusProcessCall (
- IN UINTN SmBusAddress,
- IN UINT16 Value,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINT16 Word;
-
- Word = SmBusProcessCall (SmBusAddress, Value, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusProcessCall, SmBusAddress, 2, &Value);
-
- return Word;
-}
-
-/**
- Executes an SMBUS read block command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress.
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
- Bytes are read from the SMBUS and stored in Buffer.
- The number of bytes read is returned, and will never return a value larger than 32-bytes.
- If Status is not NULL, then the status of the executed command is returned in Status.
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
- SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.
- If Length in SmBusAddress is not zero, then ASSERT().
- If Buffer is NULL, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The number of bytes read.
-
-**/
-UINTN
-EFIAPI
-S3SmBusReadBlock (
- IN UINTN SmBusAddress,
- OUT VOID *Buffer,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINTN Length;
-
- Length = SmBusReadBlock (SmBusAddress, Buffer, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusReadBlock, SmBusAddress, Length, Buffer);
-
- return Length;
-}
-
-/**
- Executes an SMBUS write block command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress.
- The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.
- Bytes are written to the SMBUS from Buffer.
- The number of bytes written is returned, and will never return a value larger than 32-bytes.
- If Status is not NULL, then the status of the executed command is returned in Status.
- If Length in SmBusAddress is zero or greater than 32, then ASSERT().
- If Buffer is NULL, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The number of bytes written.
-
-**/
-UINTN
-EFIAPI
-S3SmBusWriteBlock (
- IN UINTN SmBusAddress,
- OUT VOID *Buffer,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINTN Length;
-
- Length = SmBusWriteBlock (SmBusAddress, Buffer, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusWriteBlock, SmBusAddress, SMBUS_LIB_LENGTH (SmBusAddress), Buffer);
-
- return Length;
-}
-
-/**
- Executes an SMBUS block process call command and saves the value in the S3 script to be replayed
- on S3 resume.
-
- Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress.
- The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.
- Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer.
- If Status is not NULL, then the status of the executed command is returned in Status.
- It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read.
- SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.
- If Length in SmBusAddress is zero or greater than 32, then ASSERT().
- If WriteBuffer is NULL, then ASSERT().
- If ReadBuffer is NULL, then ASSERT().
- If any reserved bits of SmBusAddress are set, then ASSERT().
-
- @param SmBusAddress Address that encodes the SMBUS Slave Address,
- SMBUS Command, SMBUS Data Length, and PEC.
- @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS.
- @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS.
- @param Status Return status for the executed command.
- This is an optional parameter and may be NULL.
-
- @return The number of bytes written.
-
-**/
-UINTN
-EFIAPI
-S3SmBusBlockProcessCall (
- IN UINTN SmBusAddress,
- IN VOID *WriteBuffer,
- OUT VOID *ReadBuffer,
- OUT RETURN_STATUS *Status OPTIONAL
- )
-{
- UINTN Length;
-
- Length = SmBusBlockProcessCall (SmBusAddress, WriteBuffer, ReadBuffer, Status);
-
- InternalSaveSmBusExecToBootScript (EfiSmbusBWBRProcessCall, SmBusAddress, SMBUS_LIB_LENGTH (SmBusAddress), ReadBuffer);
-
- return Length;
-}
|