diff options
Diffstat (limited to 'MdePkg/Library/SmmPciLibPciRootBridgeIo/PciLib.c')
| -rw-r--r-- | MdePkg/Library/SmmPciLibPciRootBridgeIo/PciLib.c | 1434 |
1 files changed, 0 insertions, 1434 deletions
diff --git a/MdePkg/Library/SmmPciLibPciRootBridgeIo/PciLib.c b/MdePkg/Library/SmmPciLibPciRootBridgeIo/PciLib.c deleted file mode 100644 index 0b94aeb62a..0000000000 --- a/MdePkg/Library/SmmPciLibPciRootBridgeIo/PciLib.c +++ /dev/null @@ -1,1434 +0,0 @@ -/** @file
- PCI Library using SMM PCI Root Bridge I/O Protocol.
-
- Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials are
- licensed and made available under the terms and conditions of
- the BSD License which accompanies this distribution. The full
- text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-#include <PiSmm.h>
-#include <Protocol/SmmPciRootBridgeIo.h>
-#include <Library/PciLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseLib.h>
-#include <Library/SmmServicesTableLib.h>
-
-
-/**
- Assert the validity of a PCI address. A valid PCI address should contain 1's
- only in the low 28 bits.
-
- @param A The address to validate.
- @param M Additional bits to assert to be zero.
-
-**/
-#define ASSERT_INVALID_PCI_ADDRESS(A,M) \
- ASSERT (((A) & (~0xfffffff | (M))) == 0)
-
-/**
- Translate PCI Lib address into format of PCI Root Bridge I/O Protocol.
-
- @param A The address that encodes the PCI Bus, Device, Function and
- Register.
-
-**/
-#define PCI_TO_PCI_ROOT_BRIDGE_IO_ADDRESS(A) \
- ((((A) << 4) & 0xff000000) | (((A) >> 4) & 0x00000700) | (((A) << 1) & 0x001f0000) | (LShiftU64((A) & 0xfff, 32)))
-
-//
-// Global varible to cache pointer to PCI Root Bridge I/O protocol.
-//
-EFI_SMM_PCI_ROOT_BRIDGE_IO_PROTOCOL *mSmmPciRootBridgeIo = NULL;
-
-/**
- The constructor function caches the pointer to PCI Root Bridge I/O protocol.
-
- The constructor function locates PCI Root Bridge I/O protocol from protocol database.
- It will ASSERT() if that operation fails and it will always return EFI_SUCCESS.
-
- @param ImageHandle The firmware allocated handle for the EFI image.
- @param SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
-
-**/
-EFI_STATUS
-EFIAPI
-PciLibConstructor (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
-
- Status = gSmst->SmmLocateProtocol (&gEfiSmmPciRootBridgeIoProtocolGuid, NULL, (VOID**) &mSmmPciRootBridgeIo);
- ASSERT_EFI_ERROR (Status);
- ASSERT (mSmmPciRootBridgeIo != NULL);
-
- return EFI_SUCCESS;
-}
-
-/**
- Internal worker function to read a PCI configuration register.
-
- This function wraps EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() service.
- It reads and returns the PCI configuration register specified by Address,
- the width of data is specified by Width.
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param Width The width of data to read
-
- @return The value read from the PCI configuration register.
-
-**/
-UINT32
-SmmPciLibPciRootBridgeIoReadWorker (
- IN UINTN Address,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width
- )
-{
- UINT32 Data;
-
- mSmmPciRootBridgeIo->Pci.Read (
- mSmmPciRootBridgeIo,
- Width,
- PCI_TO_PCI_ROOT_BRIDGE_IO_ADDRESS (Address),
- 1,
- &Data
- );
-
- return Data;
-}
-
-/**
- Internal worker function to writes a PCI configuration register.
-
- This function wraps EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Write() service.
- It writes the PCI configuration register specified by Address with the
- value specified by Data. The width of data is specifed by Width.
- Data is returned.
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param Width The width of data to write
- @param Data The value to write.
-
- @return The value written to the PCI configuration register.
-
-**/
-UINT32
-SmmPciLibPciRootBridgeIoWriteWorker (
- IN UINTN Address,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT32 Data
- )
-{
- mSmmPciRootBridgeIo->Pci.Write (
- mSmmPciRootBridgeIo,
- Width,
- PCI_TO_PCI_ROOT_BRIDGE_IO_ADDRESS (Address),
- 1,
- &Data
- );
- return Data;
-}
-
-/**
- Registers a PCI device so PCI configuration registers may be accessed after
- SetVirtualAddressMap().
-
- Registers the PCI device specified by Address so all the PCI configuration registers
- associated with that PCI device may be accessed after SetVirtualAddressMap() is called.
-
- If Address > 0x0FFFFFFF, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
-
- @retval RETURN_SUCCESS The PCI device was registered for runtime access.
- @retval RETURN_UNSUPPORTED An attempt was made to call this function
- after ExitBootServices().
- @retval RETURN_UNSUPPORTED The resources required to access the PCI device
- at runtime could not be mapped.
- @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
- complete the registration.
-
-**/
-RETURN_STATUS
-EFIAPI
-PciRegisterForRuntimeAccess (
- IN UINTN Address
- )
-{
- ASSERT_INVALID_PCI_ADDRESS (Address, 0);
- return RETURN_UNSUPPORTED;
-}
-
-/**
- Reads an 8-bit PCI configuration register.
-
- Reads and returns the 8-bit PCI configuration register specified by Address.
- This function must guarantee that all PCI read and write operations are
- serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
-
- @return The read value from the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciRead8 (
- IN UINTN Address
- )
-{
- ASSERT_INVALID_PCI_ADDRESS (Address, 0);
-
- return (UINT8) SmmPciLibPciRootBridgeIoReadWorker (Address, EfiPciWidthUint8);
-}
-
-/**
- Writes an 8-bit PCI configuration register.
-
- Writes the 8-bit PCI configuration register specified by Address with the
- value specified by Value. Value is returned. This function must guarantee
- that all PCI read and write operations are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param Value The value to write.
-
- @return The value written to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciWrite8 (
- IN UINTN Address,
- IN UINT8 Value
- )
-{
- ASSERT_INVALID_PCI_ADDRESS (Address, 0);
-
- return (UINT8) SmmPciLibPciRootBridgeIoWriteWorker (Address, EfiPciWidthUint8, Value);
-}
-
-/**
- Performs a bitwise OR of an 8-bit PCI configuration register with
- an 8-bit value.
-
- Reads the 8-bit PCI configuration register specified by Address, performs a
- bitwise OR between the read result and the value specified by
- OrData, and writes the result to the 8-bit PCI configuration register
- specified by Address. The value written to the PCI configuration register is
- returned. This function must guarantee that all PCI read and write operations
- are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param OrData The value to OR with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciOr8 (
- IN UINTN Address,
- IN UINT8 OrData
- )
-{
- return PciWrite8 (Address, (UINT8) (PciRead8 (Address) | OrData));
-}
-
-/**
- Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
- value.
-
- Reads the 8-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData, and
- writes the result to the 8-bit PCI configuration register specified by
- Address. The value written to the PCI configuration register is returned.
- This function must guarantee that all PCI read and write operations are
- serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param AndData The value to AND with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciAnd8 (
- IN UINTN Address,
- IN UINT8 AndData
- )
-{
- return PciWrite8 (Address, (UINT8) (PciRead8 (Address) & AndData));
-}
-
-/**
- Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
- value, followed a bitwise OR with another 8-bit value.
-
- Reads the 8-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData,
- performs a bitwise OR between the result of the AND operation and
- the value specified by OrData, and writes the result to the 8-bit PCI
- configuration register specified by Address. The value written to the PCI
- configuration register is returned. This function must guarantee that all PCI
- read and write operations are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param AndData The value to AND with the PCI configuration register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciAndThenOr8 (
- IN UINTN Address,
- IN UINT8 AndData,
- IN UINT8 OrData
- )
-{
- return PciWrite8 (Address, (UINT8) ((PciRead8 (Address) & AndData) | OrData));
-}
-
-/**
- Reads a bit field of a PCI configuration register.
-
- Reads the bit field in an 8-bit PCI configuration register. The bit field is
- specified by the StartBit and the EndBit. The value of the bit field is
- returned.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address The PCI configuration register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
-
- @return The value of the bit field read from the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciBitFieldRead8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead8 (PciRead8 (Address), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to a PCI configuration register.
-
- Writes Value to the bit field of the PCI configuration register. The bit
- field is specified by the StartBit and the EndBit. All other bits in the
- destination PCI configuration register are preserved. The new value of the
- 8-bit register is returned.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param Value The new value of the bit field.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciBitFieldWrite8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 Value
- )
-{
- return PciWrite8 (
- Address,
- BitFieldWrite8 (PciRead8 (Address), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
- writes the result back to the bit field in the 8-bit port.
-
- Reads the 8-bit PCI configuration register specified by Address, performs a
- bitwise OR between the read result and the value specified by
- OrData, and writes the result to the 8-bit PCI configuration register
- specified by Address. The value written to the PCI configuration register is
- returned. This function must guarantee that all PCI read and write operations
- are serialized. Extra left bits in OrData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param OrData The value to OR with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciBitFieldOr8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 OrData
- )
-{
- return PciWrite8 (
- Address,
- BitFieldOr8 (PciRead8 (Address), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
- AND, and writes the result back to the bit field in the 8-bit register.
-
- Reads the 8-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData, and
- writes the result to the 8-bit PCI configuration register specified by
- Address. The value written to the PCI configuration register is returned.
- This function must guarantee that all PCI read and write operations are
- serialized. Extra left bits in AndData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciBitFieldAnd8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData
- )
-{
- return PciWrite8 (
- Address,
- BitFieldAnd8 (PciRead8 (Address), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
- bitwise OR, and writes the result back to the bit field in the
- 8-bit port.
-
- Reads the 8-bit PCI configuration register specified by Address, performs a
- bitwise AND followed by a bitwise OR between the read result and
- the value specified by AndData, and writes the result to the 8-bit PCI
- configuration register specified by Address. The value written to the PCI
- configuration register is returned. This function must guarantee that all PCI
- read and write operations are serialized. Extra left bits in both AndData and
- OrData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If StartBit is greater than 7, then ASSERT().
- If EndBit is greater than 7, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
- If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..7.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..7.
- @param AndData The value to AND with the PCI configuration register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT8
-EFIAPI
-PciBitFieldAndThenOr8 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT8 AndData,
- IN UINT8 OrData
- )
-{
- return PciWrite8 (
- Address,
- BitFieldAndThenOr8 (PciRead8 (Address), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 16-bit PCI configuration register.
-
- Reads and returns the 16-bit PCI configuration register specified by Address.
- This function must guarantee that all PCI read and write operations are
- serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
-
- @return The read value from the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciRead16 (
- IN UINTN Address
- )
-{
- ASSERT_INVALID_PCI_ADDRESS (Address, 1);
-
- return (UINT16) SmmPciLibPciRootBridgeIoReadWorker (Address, EfiPciWidthUint16);
-}
-
-/**
- Writes a 16-bit PCI configuration register.
-
- Writes the 16-bit PCI configuration register specified by Address with the
- value specified by Value. Value is returned. This function must guarantee
- that all PCI read and write operations are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param Value The value to write.
-
- @return The value written to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciWrite16 (
- IN UINTN Address,
- IN UINT16 Value
- )
-{
- ASSERT_INVALID_PCI_ADDRESS (Address, 1);
-
- return (UINT16) SmmPciLibPciRootBridgeIoWriteWorker (Address, EfiPciWidthUint16, Value);
-}
-
-/**
- Performs a bitwise OR of a 16-bit PCI configuration register with
- a 16-bit value.
-
- Reads the 16-bit PCI configuration register specified by Address, performs a
- bitwise OR between the read result and the value specified by
- OrData, and writes the result to the 16-bit PCI configuration register
- specified by Address. The value written to the PCI configuration register is
- returned. This function must guarantee that all PCI read and write operations
- are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param OrData The value to OR with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciOr16 (
- IN UINTN Address,
- IN UINT16 OrData
- )
-{
- return PciWrite16 (Address, (UINT16) (PciRead16 (Address) | OrData));
-}
-
-/**
- Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
- value.
-
- Reads the 16-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData, and
- writes the result to the 16-bit PCI configuration register specified by
- Address. The value written to the PCI configuration register is returned.
- This function must guarantee that all PCI read and write operations are
- serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param AndData The value to AND with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciAnd16 (
- IN UINTN Address,
- IN UINT16 AndData
- )
-{
- return PciWrite16 (Address, (UINT16) (PciRead16 (Address) & AndData));
-}
-
-/**
- Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
- value, followed a bitwise OR with another 16-bit value.
-
- Reads the 16-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData,
- performs a bitwise OR between the result of the AND operation and
- the value specified by OrData, and writes the result to the 16-bit PCI
- configuration register specified by Address. The value written to the PCI
- configuration register is returned. This function must guarantee that all PCI
- read and write operations are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param AndData The value to AND with the PCI configuration register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciAndThenOr16 (
- IN UINTN Address,
- IN UINT16 AndData,
- IN UINT16 OrData
- )
-{
- return PciWrite16 (Address, (UINT16) ((PciRead16 (Address) & AndData) | OrData));
-}
-
-/**
- Reads a bit field of a PCI configuration register.
-
- Reads the bit field in a 16-bit PCI configuration register. The bit field is
- specified by the StartBit and the EndBit. The value of the bit field is
- returned.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address The PCI configuration register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
-
- @return The value of the bit field read from the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciBitFieldRead16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead16 (PciRead16 (Address), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to a PCI configuration register.
-
- Writes Value to the bit field of the PCI configuration register. The bit
- field is specified by the StartBit and the EndBit. All other bits in the
- destination PCI configuration register are preserved. The new value of the
- 16-bit register is returned.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param Value The new value of the bit field.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciBitFieldWrite16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 Value
- )
-{
- return PciWrite16 (
- Address,
- BitFieldWrite16 (PciRead16 (Address), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
- writes the result back to the bit field in the 16-bit port.
-
- Reads the 16-bit PCI configuration register specified by Address, performs a
- bitwise OR between the read result and the value specified by
- OrData, and writes the result to the 16-bit PCI configuration register
- specified by Address. The value written to the PCI configuration register is
- returned. This function must guarantee that all PCI read and write operations
- are serialized. Extra left bits in OrData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param OrData The value to OR with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciBitFieldOr16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 OrData
- )
-{
- return PciWrite16 (
- Address,
- BitFieldOr16 (PciRead16 (Address), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
- AND, and writes the result back to the bit field in the 16-bit register.
-
- Reads the 16-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData, and
- writes the result to the 16-bit PCI configuration register specified by
- Address. The value written to the PCI configuration register is returned.
- This function must guarantee that all PCI read and write operations are
- serialized. Extra left bits in AndData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciBitFieldAnd16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData
- )
-{
- return PciWrite16 (
- Address,
- BitFieldAnd16 (PciRead16 (Address), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
- bitwise OR, and writes the result back to the bit field in the
- 16-bit port.
-
- Reads the 16-bit PCI configuration register specified by Address, performs a
- bitwise AND followed by a bitwise OR between the read result and
- the value specified by AndData, and writes the result to the 16-bit PCI
- configuration register specified by Address. The value written to the PCI
- configuration register is returned. This function must guarantee that all PCI
- read and write operations are serialized. Extra left bits in both AndData and
- OrData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 16-bit boundary, then ASSERT().
- If StartBit is greater than 15, then ASSERT().
- If EndBit is greater than 15, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
- If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..15.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..15.
- @param AndData The value to AND with the PCI configuration register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT16
-EFIAPI
-PciBitFieldAndThenOr16 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT16 AndData,
- IN UINT16 OrData
- )
-{
- return PciWrite16 (
- Address,
- BitFieldAndThenOr16 (PciRead16 (Address), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a 32-bit PCI configuration register.
-
- Reads and returns the 32-bit PCI configuration register specified by Address.
- This function must guarantee that all PCI read and write operations are
- serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
-
- @return The read value from the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciRead32 (
- IN UINTN Address
- )
-{
- ASSERT_INVALID_PCI_ADDRESS (Address, 3);
-
- return SmmPciLibPciRootBridgeIoReadWorker (Address, EfiPciWidthUint32);
-}
-
-/**
- Writes a 32-bit PCI configuration register.
-
- Writes the 32-bit PCI configuration register specified by Address with the
- value specified by Value. Value is returned. This function must guarantee
- that all PCI read and write operations are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param Value The value to write.
-
- @return The value written to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciWrite32 (
- IN UINTN Address,
- IN UINT32 Value
- )
-{
- ASSERT_INVALID_PCI_ADDRESS (Address, 3);
-
- return SmmPciLibPciRootBridgeIoWriteWorker (Address, EfiPciWidthUint32, Value);
-}
-
-/**
- Performs a bitwise OR of a 32-bit PCI configuration register with
- a 32-bit value.
-
- Reads the 32-bit PCI configuration register specified by Address, performs a
- bitwise OR between the read result and the value specified by
- OrData, and writes the result to the 32-bit PCI configuration register
- specified by Address. The value written to the PCI configuration register is
- returned. This function must guarantee that all PCI read and write operations
- are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param OrData The value to OR with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciOr32 (
- IN UINTN Address,
- IN UINT32 OrData
- )
-{
- return PciWrite32 (Address, PciRead32 (Address) | OrData);
-}
-
-/**
- Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
- value.
-
- Reads the 32-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData, and
- writes the result to the 32-bit PCI configuration register specified by
- Address. The value written to the PCI configuration register is returned.
- This function must guarantee that all PCI read and write operations are
- serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param AndData The value to AND with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciAnd32 (
- IN UINTN Address,
- IN UINT32 AndData
- )
-{
- return PciWrite32 (Address, PciRead32 (Address) & AndData);
-}
-
-/**
- Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
- value, followed a bitwise OR with another 32-bit value.
-
- Reads the 32-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData,
- performs a bitwise OR between the result of the AND operation and
- the value specified by OrData, and writes the result to the 32-bit PCI
- configuration register specified by Address. The value written to the PCI
- configuration register is returned. This function must guarantee that all PCI
- read and write operations are serialized.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
-
- @param Address The address that encodes the PCI Bus, Device, Function and
- Register.
- @param AndData The value to AND with the PCI configuration register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciAndThenOr32 (
- IN UINTN Address,
- IN UINT32 AndData,
- IN UINT32 OrData
- )
-{
- return PciWrite32 (Address, (PciRead32 (Address) & AndData) | OrData);
-}
-
-/**
- Reads a bit field of a PCI configuration register.
-
- Reads the bit field in a 32-bit PCI configuration register. The bit field is
- specified by the StartBit and the EndBit. The value of the bit field is
- returned.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
-
- @param Address The PCI configuration register to read.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
-
- @return The value of the bit field read from the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciBitFieldRead32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit
- )
-{
- return BitFieldRead32 (PciRead32 (Address), StartBit, EndBit);
-}
-
-/**
- Writes a bit field to a PCI configuration register.
-
- Writes Value to the bit field of the PCI configuration register. The bit
- field is specified by the StartBit and the EndBit. All other bits in the
- destination PCI configuration register are preserved. The new value of the
- 32-bit register is returned.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param Value The new value of the bit field.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciBitFieldWrite32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 Value
- )
-{
- return PciWrite32 (
- Address,
- BitFieldWrite32 (PciRead32 (Address), StartBit, EndBit, Value)
- );
-}
-
-/**
- Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
- writes the result back to the bit field in the 32-bit port.
-
- Reads the 32-bit PCI configuration register specified by Address, performs a
- bitwise OR between the read result and the value specified by
- OrData, and writes the result to the 32-bit PCI configuration register
- specified by Address. The value written to the PCI configuration register is
- returned. This function must guarantee that all PCI read and write operations
- are serialized. Extra left bits in OrData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param OrData The value to OR with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciBitFieldOr32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 OrData
- )
-{
- return PciWrite32 (
- Address,
- BitFieldOr32 (PciRead32 (Address), StartBit, EndBit, OrData)
- );
-}
-
-/**
- Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
- AND, and writes the result back to the bit field in the 32-bit register.
-
- Reads the 32-bit PCI configuration register specified by Address, performs a
- bitwise AND between the read result and the value specified by AndData, and
- writes the result to the 32-bit PCI configuration register specified by
- Address. The value written to the PCI configuration register is returned.
- This function must guarantee that all PCI read and write operations are
- serialized. Extra left bits in AndData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with the PCI configuration register.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciBitFieldAnd32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData
- )
-{
- return PciWrite32 (
- Address,
- BitFieldAnd32 (PciRead32 (Address), StartBit, EndBit, AndData)
- );
-}
-
-/**
- Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
- bitwise OR, and writes the result back to the bit field in the
- 32-bit port.
-
- Reads the 32-bit PCI configuration register specified by Address, performs a
- bitwise AND followed by a bitwise OR between the read result and
- the value specified by AndData, and writes the result to the 32-bit PCI
- configuration register specified by Address. The value written to the PCI
- configuration register is returned. This function must guarantee that all PCI
- read and write operations are serialized. Extra left bits in both AndData and
- OrData are stripped.
-
- If Address > 0x0FFFFFFF, then ASSERT().
- If Address is not aligned on a 32-bit boundary, then ASSERT().
- If StartBit is greater than 31, then ASSERT().
- If EndBit is greater than 31, then ASSERT().
- If EndBit is less than StartBit, then ASSERT().
- If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
- If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
-
- @param Address The PCI configuration register to write.
- @param StartBit The ordinal of the least significant bit in the bit field.
- Range 0..31.
- @param EndBit The ordinal of the most significant bit in the bit field.
- Range 0..31.
- @param AndData The value to AND with the PCI configuration register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the PCI configuration register.
-
-**/
-UINT32
-EFIAPI
-PciBitFieldAndThenOr32 (
- IN UINTN Address,
- IN UINTN StartBit,
- IN UINTN EndBit,
- IN UINT32 AndData,
- IN UINT32 OrData
- )
-{
- return PciWrite32 (
- Address,
- BitFieldAndThenOr32 (PciRead32 (Address), StartBit, EndBit, AndData, OrData)
- );
-}
-
-/**
- Reads a range of PCI configuration registers into a caller supplied buffer.
-
- Reads the range of PCI configuration registers specified by StartAddress and
- Size into the buffer specified by Buffer. This function only allows the PCI
- configuration registers from a single PCI function to be read. Size is
- returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
- and 16-bit PCI configuration read cycles may be used at the beginning and the
- end of the range.
-
- If StartAddress > 0x0FFFFFFF, then ASSERT().
- If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
- If Size > 0 and Buffer is NULL, then ASSERT().
-
- @param StartAddress The starting address that encodes the PCI Bus, Device,
- Function and Register.
- @param Size The size in bytes of the transfer.
- @param Buffer The pointer to a buffer receiving the data read.
-
- @return Size
-
-**/
-UINTN
-EFIAPI
-PciReadBuffer (
- IN UINTN StartAddress,
- IN UINTN Size,
- OUT VOID *Buffer
- )
-{
- UINTN ReturnValue;
-
- ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
- ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
-
- if (Size == 0) {
- return Size;
- }
-
- ASSERT (Buffer != NULL);
-
- //
- // Save Size for return
- //
- ReturnValue = Size;
-
- if ((StartAddress & BIT0) != 0) {
- //
- // Read a byte if StartAddress is byte aligned
- //
- *(volatile UINT8 *)Buffer = PciRead8 (StartAddress);
- StartAddress += sizeof (UINT8);
- Size -= sizeof (UINT8);
- Buffer = (UINT8*)Buffer + 1;
- }
-
- if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
- //
- // Read a word if StartAddress is word aligned
- //
- WriteUnaligned16 (Buffer, PciRead16 (StartAddress));
- StartAddress += sizeof (UINT16);
- Size -= sizeof (UINT16);
- Buffer = (UINT16*)Buffer + 1;
- }
-
- while (Size >= sizeof (UINT32)) {
- //
- // Read as many double words as possible
- //
- WriteUnaligned32 (Buffer, PciRead32 (StartAddress));
- StartAddress += sizeof (UINT32);
- Size -= sizeof (UINT32);
- Buffer = (UINT32*)Buffer + 1;
- }
-
- if (Size >= sizeof (UINT16)) {
- //
- // Read the last remaining word if exist
- //
- WriteUnaligned16 (Buffer, PciRead16 (StartAddress));
- StartAddress += sizeof (UINT16);
- Size -= sizeof (UINT16);
- Buffer = (UINT16*)Buffer + 1;
- }
-
- if (Size >= sizeof (UINT8)) {
- //
- // Read the last remaining byte if exist
- //
- *(volatile UINT8 *)Buffer = PciRead8 (StartAddress);
- }
-
- return ReturnValue;
-}
-
-/**
- Copies the data in a caller supplied buffer to a specified range of PCI
- configuration space.
-
- Writes the range of PCI configuration registers specified by StartAddress and
- Size from the buffer specified by Buffer. This function only allows the PCI
- configuration registers from a single PCI function to be written. Size is
- returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
- 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
- and the end of the range.
-
- If StartAddress > 0x0FFFFFFF, then ASSERT().
- If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
- If Size > 0 and Buffer is NULL, then ASSERT().
-
- @param StartAddress The starting address that encodes the PCI Bus, Device,
- Function and Register.
- @param Size The size in bytes of the transfer.
- @param Buffer The pointer to a buffer containing the data to write.
-
- @return Size written to StartAddress.
-
-**/
-UINTN
-EFIAPI
-PciWriteBuffer (
- IN UINTN StartAddress,
- IN UINTN Size,
- IN VOID *Buffer
- )
-{
- UINTN ReturnValue;
-
- ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
- ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
-
- if (Size == 0) {
- return 0;
- }
-
- ASSERT (Buffer != NULL);
-
- //
- // Save Size for return
- //
- ReturnValue = Size;
-
- if ((StartAddress & BIT0) != 0) {
- //
- // Write a byte if StartAddress is byte aligned
- //
- PciWrite8 (StartAddress, *(UINT8*)Buffer);
- StartAddress += sizeof (UINT8);
- Size -= sizeof (UINT8);
- Buffer = (UINT8*)Buffer + 1;
- }
-
- if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
- //
- // Write a word if StartAddress is word aligned
- //
- PciWrite16 (StartAddress, ReadUnaligned16 (Buffer));
- StartAddress += sizeof (UINT16);
- Size -= sizeof (UINT16);
- Buffer = (UINT16*)Buffer + 1;
- }
-
- while (Size >= sizeof (UINT32)) {
- //
- // Write as many double words as possible
- //
- PciWrite32 (StartAddress, ReadUnaligned32 (Buffer));
- StartAddress += sizeof (UINT32);
- Size -= sizeof (UINT32);
- Buffer = (UINT32*)Buffer + 1;
- }
-
- if (Size >= sizeof (UINT16)) {
- //
- // Write the last remaining word if exist
- //
- PciWrite16 (StartAddress, ReadUnaligned16 (Buffer));
- StartAddress += sizeof (UINT16);
- Size -= sizeof (UINT16);
- Buffer = (UINT16*)Buffer + 1;
- }
-
- if (Size >= sizeof (UINT8)) {
- //
- // Write the last remaining byte if exist
- //
- PciWrite8 (StartAddress, *(UINT8*)Buffer);
- }
-
- return ReturnValue;
-}
|