diff options
Diffstat (limited to 'NetworkPkg/Ip6Dxe/Ip6Impl.c')
-rw-r--r-- | NetworkPkg/Ip6Dxe/Ip6Impl.c | 1847 |
1 files changed, 0 insertions, 1847 deletions
diff --git a/NetworkPkg/Ip6Dxe/Ip6Impl.c b/NetworkPkg/Ip6Dxe/Ip6Impl.c deleted file mode 100644 index b186c0af20..0000000000 --- a/NetworkPkg/Ip6Dxe/Ip6Impl.c +++ /dev/null @@ -1,1847 +0,0 @@ -/** @file
- Implementation of EFI_IP6_PROTOCOL protocol interfaces.
-
- (C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
- Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "Ip6Impl.h"
-
-EFI_IPSEC2_PROTOCOL *mIpSec = NULL;
-
-EFI_IP6_PROTOCOL mEfiIp6ProtocolTemplete = {
- EfiIp6GetModeData,
- EfiIp6Configure,
- EfiIp6Groups,
- EfiIp6Routes,
- EfiIp6Neighbors,
- EfiIp6Transmit,
- EfiIp6Receive,
- EfiIp6Cancel,
- EfiIp6Poll
-};
-
-/**
- Gets the current operational settings for this instance of the EFI IPv6 Protocol driver.
-
- The GetModeData() function returns the current operational mode data for this driver instance.
- The data fields in EFI_IP6_MODE_DATA are read only. This function is used optionally to
- retrieve the operational mode data of underlying networks or drivers.
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[out] Ip6ModeData Pointer to the EFI IPv6 Protocol mode data structure.
- @param[out] MnpConfigData Pointer to the managed network configuration data structure.
- @param[out] SnpModeData Pointer to the simple network mode data structure.
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_INVALID_PARAMETER This is NULL.
- @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6GetModeData (
- IN EFI_IP6_PROTOCOL *This,
- OUT EFI_IP6_MODE_DATA *Ip6ModeData OPTIONAL,
- OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL,
- OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL
- )
-{
- IP6_PROTOCOL *IpInstance;
- IP6_SERVICE *IpSb;
- IP6_INTERFACE *IpIf;
- EFI_IP6_CONFIG_DATA *Config;
- EFI_STATUS Status;
- EFI_TPL OldTpl;
-
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
- IpIf = IpInstance->Interface;
-
- if (IpSb->LinkLocalDadFail) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Ip6ModeData != NULL) {
- //
- // IsStarted is "whether the EfiIp6Configure has been called".
- // IsConfigured is "whether the station address has been configured"
- //
- Ip6ModeData->IsStarted = (BOOLEAN) (IpInstance->State == IP6_STATE_CONFIGED);
- Ip6ModeData->MaxPacketSize = IpSb->MaxPacketSize;
- CopyMem (&Ip6ModeData->ConfigData, &IpInstance->ConfigData, sizeof (EFI_IP6_CONFIG_DATA));
- Ip6ModeData->IsConfigured = FALSE;
-
- Ip6ModeData->AddressCount = 0;
- Ip6ModeData->AddressList = NULL;
-
- Ip6ModeData->GroupCount = IpInstance->GroupCount;
- Ip6ModeData->GroupTable = NULL;
-
- Ip6ModeData->RouteCount = 0;
- Ip6ModeData->RouteTable = NULL;
-
- Ip6ModeData->NeighborCount = 0;
- Ip6ModeData->NeighborCache = NULL;
-
- Ip6ModeData->PrefixCount = 0;
- Ip6ModeData->PrefixTable = NULL;
-
- Ip6ModeData->IcmpTypeCount = 23;
- Ip6ModeData->IcmpTypeList = AllocateCopyPool (
- Ip6ModeData->IcmpTypeCount * sizeof (EFI_IP6_ICMP_TYPE),
- mIp6SupportedIcmp
- );
- if (Ip6ModeData->IcmpTypeList == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Error;
- }
-
- //
- // Return the currently configured IPv6 addresses and corresponding prefix lengths.
- //
- Status = Ip6BuildEfiAddressList (
- IpSb,
- &Ip6ModeData->AddressCount,
- &Ip6ModeData->AddressList
- );
- if (EFI_ERROR (Status)) {
- goto Error;
- }
-
- //
- // Return the current station address for this IP child.
- // If UseAnyStationAddress is set to TRUE, IP6 driver will
- // select a source address from its address list. Otherwise use the
- // StationAddress in config data.
- //
- if (Ip6ModeData->IsStarted) {
- Config = &Ip6ModeData->ConfigData;
-
- if (IpIf->Configured || NetIp6IsUnspecifiedAddr (&Config->DestinationAddress)) {
- Ip6ModeData->IsConfigured = TRUE;
- } else {
- Ip6ModeData->IsConfigured = FALSE;
- }
-
- //
- // Build a EFI route table for user from the internal route table.
- //
- Status = Ip6BuildEfiRouteTable (
- IpSb->RouteTable,
- &Ip6ModeData->RouteCount,
- &Ip6ModeData->RouteTable
- );
-
- if (EFI_ERROR (Status)) {
- goto Error;
- }
- }
-
- if (Ip6ModeData->IsConfigured) {
- //
- // Return the joined multicast group addresses.
- //
- if (IpInstance->GroupCount != 0) {
- Ip6ModeData->GroupTable = AllocateCopyPool (
- IpInstance->GroupCount * sizeof (EFI_IPv6_ADDRESS),
- IpInstance->GroupList
- );
- if (Ip6ModeData->GroupTable == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Error;
- }
- }
- //
- // Return the neighbor cache entries
- //
- Status = Ip6BuildEfiNeighborCache (
- IpInstance,
- &Ip6ModeData->NeighborCount,
- &Ip6ModeData->NeighborCache
- );
- if (EFI_ERROR (Status)) {
- goto Error;
- }
-
- //
- // Return the prefix table entries
- //
- Status = Ip6BuildPrefixTable (
- IpInstance,
- &Ip6ModeData->PrefixCount,
- &Ip6ModeData->PrefixTable
- );
- if (EFI_ERROR (Status)) {
- goto Error;
- }
-
- }
- }
-
- //
- // Get fresh mode data from MNP, since underlying media status may change
- //
- Status = IpSb->Mnp->GetModeData (IpSb->Mnp, MnpConfigData, SnpModeData);
-
- goto Exit;
-
-Error:
- if (Ip6ModeData != NULL) {
- if (Ip6ModeData->AddressList != NULL) {
- FreePool (Ip6ModeData->AddressList);
- }
-
- if (Ip6ModeData->GroupTable != NULL) {
- FreePool (Ip6ModeData->GroupTable);
- }
-
- if (Ip6ModeData->RouteTable != NULL) {
- FreePool (Ip6ModeData->RouteTable);
- }
-
- if (Ip6ModeData->NeighborCache != NULL) {
- FreePool (Ip6ModeData->NeighborCache);
- }
-
- if (Ip6ModeData->PrefixTable != NULL) {
- FreePool (Ip6ModeData->PrefixTable);
- }
-
- if (Ip6ModeData->IcmpTypeList != NULL) {
- FreePool (Ip6ModeData->IcmpTypeList);
- }
- }
-
-Exit:
- gBS->RestoreTPL (OldTpl);
- return Status;
-}
-
-/**
- Validate that Ipv6 address is OK to be used as station address or next hop address/ neighbor.
-
- @param[in] IpSb The IP6 service instance.
- @param[in] Ip The IPv6 address to validate.
- @param[in] Flag If TRUE, validate if the address is OK to be used
- as station address. If FALSE, validate if the
- address is OK to be used as the next hop address/
- neighbor.
-
- @retval TRUE The Ip address is valid and could be used.
- @retval FALSE Invalid Ip address.
-
-**/
-BOOLEAN
-Ip6IsValidAddress (
- IN IP6_SERVICE *IpSb,
- IN EFI_IPv6_ADDRESS *Ip,
- IN BOOLEAN Flag
- )
-{
- if (!NetIp6IsUnspecifiedAddr (Ip)) {
- if (!NetIp6IsValidUnicast(Ip)) {
- return FALSE;
- }
- if (Ip6IsOneOfSetAddress (IpSb, Ip, NULL, NULL)) {
- return Flag;
- }
- } else {
- return Flag;
- }
-
- return (BOOLEAN) !Flag;
-}
-
-/**
- Validate whether the value of protocol is illegal or not. Protocol is the 'Next Header' field
- in the last IPv6 extension header, or basic IPv6 header is there's no extension header.
-
- @param[in] Protocol Default value of 'Next Header'
-
- @retval TRUE The protocol is illegal.
- @retval FALSE The protocol is legal.
-
-**/
-BOOLEAN
-Ip6IsIllegalProtocol (
- IN UINT8 Protocol
- )
-{
- if (Protocol == IP6_HOP_BY_HOP || Protocol == EFI_IP_PROTO_ICMP || Protocol == IP4_PROTO_IGMP) {
- return TRUE;
- }
-
- if (Protocol == 41 || Protocol == 43 || Protocol == 44 || Protocol == 59 || Protocol == 60 || Protocol == 124) {
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Intiialize the IP6_PROTOCOL structure to the unconfigured states.
-
- @param[in] IpSb The IP6 service instance.
- @param[in, out] IpInstance The IP6 child instance.
-
-**/
-VOID
-Ip6InitProtocol (
- IN IP6_SERVICE *IpSb,
- IN OUT IP6_PROTOCOL *IpInstance
- )
-{
- ASSERT ((IpSb != NULL) && (IpInstance != NULL));
-
- ZeroMem (IpInstance, sizeof (IP6_PROTOCOL));
-
- IpInstance->Signature = IP6_PROTOCOL_SIGNATURE;
- IpInstance->State = IP6_STATE_UNCONFIGED;
- IpInstance->Service = IpSb;
- IpInstance->GroupList = NULL;
- CopyMem (&IpInstance->Ip6Proto, &mEfiIp6ProtocolTemplete, sizeof (EFI_IP6_PROTOCOL));
-
- NetMapInit (&IpInstance->RxTokens);
- NetMapInit (&IpInstance->TxTokens);
- InitializeListHead (&IpInstance->Received);
- InitializeListHead (&IpInstance->Delivered);
-
- EfiInitializeLock (&IpInstance->RecycleLock, TPL_NOTIFY);
-}
-
-/**
- Configure the IP6 child. If the child is already configured,
- change the configuration parameter. Otherwise, configure it
- for the first time. The caller should validate the configuration
- before deliver them to it. It also don't do configure NULL.
-
- @param[in, out] IpInstance The IP6 child to configure.
- @param[in] Config The configure data.
-
- @retval EFI_SUCCESS The IP6 child is successfully configured.
- @retval EFI_DEVICE_ERROR Failed to free the pending transive or to
- configure underlying MNP, or other errors.
- @retval EFI_NO_MAPPING The IP6 child is configured to use the default
- address, but the default address hasn't been
- configured. The IP6 child doesn't need to be
- reconfigured when the default address is configured.
- @retval EFI_OUT_OF_RESOURCES No more memory space is available.
- @retval other Other error occurs.
-
-**/
-EFI_STATUS
-Ip6ConfigProtocol (
- IN OUT IP6_PROTOCOL *IpInstance,
- IN EFI_IP6_CONFIG_DATA *Config
- )
-{
- IP6_SERVICE *IpSb;
- IP6_INTERFACE *IpIf;
- EFI_STATUS Status;
- EFI_IP6_CONFIG_DATA *Current;
- IP6_ADDRESS_INFO *AddressInfo;
- BOOLEAN StationZero;
- BOOLEAN DestZero;
- EFI_IPv6_ADDRESS Source;
- BOOLEAN AddrOk;
-
- IpSb = IpInstance->Service;
- Current = &IpInstance->ConfigData;
-
- //
- // User is changing packet filters. It must be stopped
- // before the station address can be changed.
- //
- if (IpInstance->State == IP6_STATE_CONFIGED) {
- //
- // Cancel all the pending transmit/receive from upper layer
- //
- Status = Ip6Cancel (IpInstance, NULL);
-
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- CopyMem (Current, Config, sizeof (EFI_IP6_CONFIG_DATA));
- return EFI_SUCCESS;
- }
-
- //
- // Set up the interface.
- //
- StationZero = NetIp6IsUnspecifiedAddr (&Config->StationAddress);
- DestZero = NetIp6IsUnspecifiedAddr (&Config->DestinationAddress);
-
- if (StationZero && DestZero) {
- //
- // StationAddress is still zero.
- //
-
- NET_GET_REF (IpSb->DefaultInterface);
- IpInstance->Interface = IpSb->DefaultInterface;
- InsertTailList (&IpSb->DefaultInterface->IpInstances, &IpInstance->AddrLink);
-
- CopyMem (Current, Config, sizeof (EFI_IP6_CONFIG_DATA));
- IpInstance->State = IP6_STATE_CONFIGED;
-
- return EFI_SUCCESS;
- }
-
- if (StationZero && !DestZero) {
- Status = Ip6SelectSourceAddress (IpSb, &Config->DestinationAddress, &Source);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- } else {
- IP6_COPY_ADDRESS (&Source, &Config->StationAddress);
- }
-
- AddrOk = Ip6IsOneOfSetAddress (IpSb, &Source, &IpIf, &AddressInfo);
- if (AddrOk) {
- if (AddressInfo != NULL) {
- IpInstance->PrefixLength = AddressInfo->PrefixLength;
- } else {
- IpInstance->PrefixLength = IP6_LINK_LOCAL_PREFIX_LENGTH;
- }
- } else {
- //
- // The specified source address is not one of the addresses IPv6 maintains.
- //
- return EFI_INVALID_PARAMETER;
- }
-
-
- NET_GET_REF (IpIf);
- IpInstance->Interface = IpIf;
- InsertTailList (&IpIf->IpInstances, &IpInstance->AddrLink);
-
- CopyMem (Current, Config, sizeof (EFI_IP6_CONFIG_DATA));
- IP6_COPY_ADDRESS (&Current->StationAddress, &Source);
- IpInstance->State = IP6_STATE_CONFIGED;
-
- return EFI_SUCCESS;
-}
-
-/**
- Clean up the IP6 child, and release all the resources used by it.
-
- @param[in, out] IpInstance The IP6 child to clean up.
-
- @retval EFI_SUCCESS The IP6 child is cleaned up.
- @retval EFI_DEVICE_ERROR Some resources failed to be released.
-
-**/
-EFI_STATUS
-Ip6CleanProtocol (
- IN OUT IP6_PROTOCOL *IpInstance
- )
-{
- if (EFI_ERROR (Ip6Cancel (IpInstance, NULL))) {
- return EFI_DEVICE_ERROR;
- }
-
- if (EFI_ERROR (Ip6Groups (IpInstance, FALSE, NULL))) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Some packets haven't been recycled. It is because either the
- // user forgets to recycle the packets, or because the callback
- // hasn't been called. Just leave it alone.
- //
- if (!IsListEmpty (&IpInstance->Delivered)) {
- ;
- }
-
- if (IpInstance->Interface != NULL) {
- RemoveEntryList (&IpInstance->AddrLink);
- Ip6CleanInterface (IpInstance->Interface, IpInstance);
- IpInstance->Interface = NULL;
- }
-
- if (IpInstance->GroupList != NULL) {
- FreePool (IpInstance->GroupList);
- IpInstance->GroupList = NULL;
- IpInstance->GroupCount = 0;
- }
-
- NetMapClean (&IpInstance->TxTokens);
-
- NetMapClean (&IpInstance->RxTokens);
-
- return EFI_SUCCESS;
-}
-
-/**
- Configure the MNP parameter used by IP. The IP driver uses one MNP
- child to transmit/receive frames. By default, it configures MNP
- to receive unicast/multicast/broadcast. Also, it will enable/disable
- the promiscuous receive according to whether there is IP child
- enable that or not. If Force is FALSE, it will iterate through
- all the IP children to check whether the promiscuous receive
- setting has been changed. If it hasn't been changed, it won't
- reconfigure the MNP. If Force is TRUE, the MNP is configured
- whether that is changed or not.
-
- @param[in] IpSb The IP6 service instance that is to be changed.
- @param[in] Force Force the configuration or not.
-
- @retval EFI_SUCCESS The MNP successfully configured/reconfigured.
- @retval Others Configuration failed.
-
-**/
-EFI_STATUS
-Ip6ServiceConfigMnp (
- IN IP6_SERVICE *IpSb,
- IN BOOLEAN Force
- )
-{
- LIST_ENTRY *Entry;
- LIST_ENTRY *ProtoEntry;
- IP6_INTERFACE *IpIf;
- IP6_PROTOCOL *IpInstance;
- BOOLEAN Reconfig;
- BOOLEAN PromiscReceive;
- EFI_STATUS Status;
-
- Reconfig = FALSE;
- PromiscReceive = FALSE;
-
- if (!Force) {
- //
- // Iterate through the IP children to check whether promiscuous
- // receive setting has been changed. Update the interface's receive
- // filter also.
- //
- NET_LIST_FOR_EACH (Entry, &IpSb->Interfaces) {
-
- IpIf = NET_LIST_USER_STRUCT (Entry, IP6_INTERFACE, Link);
- IpIf->PromiscRecv = FALSE;
-
- NET_LIST_FOR_EACH (ProtoEntry, &IpIf->IpInstances) {
- IpInstance = NET_LIST_USER_STRUCT (ProtoEntry, IP6_PROTOCOL, AddrLink);
-
- if (IpInstance->ConfigData.AcceptPromiscuous) {
- IpIf->PromiscRecv = TRUE;
- PromiscReceive = TRUE;
- }
- }
- }
-
- //
- // If promiscuous receive isn't changed, it isn't necessary to reconfigure.
- //
- if (PromiscReceive == IpSb->MnpConfigData.EnablePromiscuousReceive) {
- return EFI_SUCCESS;
- }
-
- Reconfig = TRUE;
- IpSb->MnpConfigData.EnablePromiscuousReceive = PromiscReceive;
- }
-
- Status = IpSb->Mnp->Configure (IpSb->Mnp, &IpSb->MnpConfigData);
-
- //
- // recover the original configuration if failed to set the configure.
- //
- if (EFI_ERROR (Status) && Reconfig) {
- IpSb->MnpConfigData.EnablePromiscuousReceive = (BOOLEAN) !PromiscReceive;
- }
-
- return Status;
-}
-
-/**
- Assigns an IPv6 address and subnet mask to this EFI IPv6 Protocol driver instance.
-
- The Configure() function is used to set, change, or reset the operational parameters and filter
- settings for this EFI IPv6 Protocol instance. Until these parameters have been set, no network traffic
- can be sent or received by this instance. Once the parameters have been reset (by calling this
- function with Ip6ConfigData set to NULL), no more traffic can be sent or received until these
- parameters have been set again. Each EFI IPv6 Protocol instance can be started and stopped
- independently of each other by enabling or disabling their receive filter settings with the
- Configure() function.
-
- If Ip6ConfigData.StationAddress is a valid non-zero IPv6 unicast address, it is required
- to be one of the currently configured IPv6 addresses listed in the EFI IPv6 drivers, or else
- EFI_INVALID_PARAMETER will be returned. If Ip6ConfigData.StationAddress is
- unspecified, the IPv6 driver will bind a source address according to the source address selection
- algorithm. Clients could frequently call GetModeData() to check get currently configured IPv6
- address list in the EFI IPv6 driver. If both Ip6ConfigData.StationAddress and
- Ip6ConfigData.Destination are unspecified, when transmitting the packet afterwards, the
- source address filled in each outgoing IPv6 packet is decided based on the destination of this packet.
-
- If operational parameters are reset or changed, any pending transmit and receive requests will be
- cancelled. Their completion token status will be set to EFI_ABORTED and their events will be
- signaled.
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[in] Ip6ConfigData Pointer to the EFI IPv6 Protocol configuration data structure.
- If NULL, reset the configuration data.
-
- @retval EFI_SUCCESS The driver instance was successfully opened.
- @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- - This is NULL.
- - Ip6ConfigData.StationAddress is neither zero nor
- a unicast IPv6 address.
- - Ip6ConfigData.StationAddress is neither zero nor
- one of the configured IP addresses in the EFI IPv6 driver.
- - Ip6ConfigData.DefaultProtocol is illegal.
- @retval EFI_OUT_OF_RESOURCES The EFI IPv6 Protocol driver instance data could not be allocated.
- @retval EFI_NO_MAPPING The IPv6 driver was responsible for choosing a source address for
- this instance, but no source address was available for use.
- @retval EFI_ALREADY_STARTED The interface is already open and must be stopped before the IPv6
- address or prefix length can be changed.
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI IPv6
- Protocol driver instance was not opened.
- @retval EFI_UNSUPPORTED Default protocol specified through
- Ip6ConfigData.DefaulProtocol isn't supported.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Configure (
- IN EFI_IP6_PROTOCOL *This,
- IN EFI_IP6_CONFIG_DATA *Ip6ConfigData OPTIONAL
- )
-{
- IP6_PROTOCOL *IpInstance;
- EFI_IP6_CONFIG_DATA *Current;
- EFI_TPL OldTpl;
- EFI_STATUS Status;
- IP6_SERVICE *IpSb;
-
- //
- // First, validate the parameters
- //
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
-
- if (IpSb->LinkLocalDadFail && Ip6ConfigData != NULL) {
- return EFI_DEVICE_ERROR;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
-
- Status = EFI_INVALID_PARAMETER;
-
- //
- // Validate the configuration first.
- //
- if (Ip6ConfigData != NULL) {
- //
- // Check whether the station address is valid.
- //
- if (!Ip6IsValidAddress (IpSb, &Ip6ConfigData->StationAddress, TRUE)) {
- goto Exit;
- }
- //
- // Check whether the default protocol is valid.
- //
- if (Ip6IsIllegalProtocol (Ip6ConfigData->DefaultProtocol)) {
- goto Exit;
- }
-
- //
- // User can only update packet filters when already configured.
- // If it wants to change the station address, it must configure(NULL)
- // the instance firstly.
- //
- if (IpInstance->State == IP6_STATE_CONFIGED) {
- Current = &IpInstance->ConfigData;
-
- if (!EFI_IP6_EQUAL (&Current->StationAddress, &Ip6ConfigData->StationAddress)) {
- Status = EFI_ALREADY_STARTED;
- goto Exit;
- }
-
- if (NetIp6IsUnspecifiedAddr (&Current->StationAddress) && IP6_NO_MAPPING (IpInstance)) {
- Status = EFI_NO_MAPPING;
- goto Exit;
- }
- }
- }
-
- //
- // Configure the instance or clean it up.
- //
- if (Ip6ConfigData != NULL) {
- Status = Ip6ConfigProtocol (IpInstance, Ip6ConfigData);
- } else {
- Status = Ip6CleanProtocol (IpInstance);
-
- //
- // Don't change the state if it is DESTROY, consider the following
- // valid sequence: Mnp is unloaded-->Ip Stopped-->Udp Stopped,
- // Configure (ThisIp, NULL). If the state is changed to UNCONFIGED,
- // the unload fails miserably.
- //
- if (IpInstance->State == IP6_STATE_CONFIGED) {
- IpInstance->State = IP6_STATE_UNCONFIGED;
- }
- }
-
- //
- // Update the MNP's configure data. Ip6ServiceConfigMnp will check
- // whether it is necessary to reconfigure the MNP.
- //
- Ip6ServiceConfigMnp (IpInstance->Service, FALSE);
-
-Exit:
- gBS->RestoreTPL (OldTpl);
- return Status;
-}
-
-/**
- Joins and leaves multicast groups.
-
- The Groups() function is used to join and leave multicast group sessions. Joining a group will
- enable reception of matching multicast packets. Leaving a group will disable reception of matching
- multicast packets. Source-Specific Multicast isn't required to be supported.
-
- If JoinFlag is FALSE and GroupAddress is NULL, all joined groups will be left.
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[in] JoinFlag Set to TRUE to join the multicast group session, and FALSE to leave.
- @param[in] GroupAddress Pointer to the IPv6 multicast address.
- This is an optional parameter that may be NULL.
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_INVALID_PARAMETER One or more of the following is TRUE:
- - This is NULL.
- - JoinFlag is TRUE and GroupAddress is NULL.
- - GroupAddress is not NULL and *GroupAddress is
- not a multicast IPv6 address.
- - GroupAddress is not NULL and *GroupAddress is in the
- range of SSM destination address.
- @retval EFI_NOT_STARTED This instance has not been started.
- @retval EFI_OUT_OF_RESOURCES System resources could not be allocated.
- @retval EFI_UNSUPPORTED This EFI IPv6 Protocol implementation does not support multicast groups.
- @retval EFI_ALREADY_STARTED The group address is already in the group table (when
- JoinFlag is TRUE).
- @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is FALSE).
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Groups (
- IN EFI_IP6_PROTOCOL *This,
- IN BOOLEAN JoinFlag,
- IN EFI_IPv6_ADDRESS *GroupAddress OPTIONAL
- )
-{
- EFI_TPL OldTpl;
- EFI_STATUS Status;
- IP6_PROTOCOL *IpInstance;
- IP6_SERVICE *IpSb;
-
- if ((This == NULL) || (JoinFlag && GroupAddress == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (GroupAddress != NULL && !IP6_IS_MULTICAST (GroupAddress)) {
- return EFI_INVALID_PARAMETER;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
-
- if (IpSb->LinkLocalDadFail) {
- return EFI_DEVICE_ERROR;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
-
- if (IpInstance->State != IP6_STATE_CONFIGED) {
- Status = EFI_NOT_STARTED;
- goto ON_EXIT;
- }
-
- Status = Ip6Groups (IpInstance, JoinFlag, GroupAddress);
-
-ON_EXIT:
- gBS->RestoreTPL (OldTpl);
- return Status;
-}
-
-/**
- Adds and deletes routing table entries.
-
- The Routes() function adds a route to, or deletes a route from, the routing table.
-
- Routes are determined by comparing the leftmost PrefixLength bits of Destination with
- the destination IPv6 address arithmetically. The gateway address must be on the same subnet as the
- configured station address.
-
- The default route is added with Destination and PrefixLegth both set to all zeros. The
- default route matches all destination IPv6 addresses that do not match any other routes.
-
- All EFI IPv6 Protocol instances share a routing table.
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[in] DeleteRoute Set to TRUE to delete this route from the routing table. Set to
- FALSE to add this route to the routing table. Destination,
- PrefixLength and Gateway are used as the key to each
- route entry.
- @param[in] Destination The address prefix of the subnet that needs to be routed.
- This is an optional parameter that may be NULL.
- @param[in] PrefixLength The prefix length of Destination. Ignored if Destination
- is NULL.
- @param[in] GatewayAddress The unicast gateway IPv6 address for this route.
- This is an optional parameter that may be NULL.
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_NOT_STARTED The driver instance has not been started.
- @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- - This is NULL.
- - When DeleteRoute is TRUE, both Destination and
- GatewayAddress are NULL.
- - When DeleteRoute is FALSE, either Destination or
- GatewayAddress is NULL.
- - *GatewayAddress is not a valid unicast IPv6 address.
- - *GatewayAddress is one of the local configured IPv6
- addresses.
- @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table.
- @retval EFI_NOT_FOUND This route is not in the routing table (when DeleteRoute is TRUE).
- @retval EFI_ACCESS_DENIED The route is already defined in the routing table (when
- DeleteRoute is FALSE).
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Routes (
- IN EFI_IP6_PROTOCOL *This,
- IN BOOLEAN DeleteRoute,
- IN EFI_IPv6_ADDRESS *Destination OPTIONAL,
- IN UINT8 PrefixLength,
- IN EFI_IPv6_ADDRESS *GatewayAddress OPTIONAL
- )
-{
- IP6_PROTOCOL *IpInstance;
- EFI_STATUS Status;
- EFI_TPL OldTpl;
- IP6_SERVICE *IpSb;
-
- if ((This == NULL) || (PrefixLength >= IP6_PREFIX_NUM)) {
- return EFI_INVALID_PARAMETER;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
-
- if (IpSb->LinkLocalDadFail) {
- return EFI_DEVICE_ERROR;
- }
-
- if (IpInstance->State != IP6_STATE_CONFIGED) {
- return EFI_NOT_STARTED;
- }
-
- if (DeleteRoute && (Destination == NULL) && (GatewayAddress == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (!DeleteRoute && (Destination == NULL || GatewayAddress == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (GatewayAddress != NULL) {
- if (!Ip6IsValidAddress (IpSb, GatewayAddress, FALSE)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (!NetIp6IsUnspecifiedAddr (GatewayAddress) &&
- !NetIp6IsNetEqual (GatewayAddress, &IpInstance->ConfigData.StationAddress, PrefixLength)
- ) {
- return EFI_INVALID_PARAMETER;
- }
- }
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
-
- //
- // Update the route table
- //
- if (DeleteRoute) {
- Status = Ip6DelRoute (IpSb->RouteTable, Destination, PrefixLength, GatewayAddress);
- } else {
- Status = Ip6AddRoute (IpSb->RouteTable, Destination, PrefixLength, GatewayAddress);
- }
-
- gBS->RestoreTPL (OldTpl);
- return Status;
-}
-
-/**
- Add or delete Neighbor cache entries.
-
- The Neighbors() function is used to add, update, or delete an entry from neighbor cache.
- IPv6 neighbor cache entries are typically inserted and updated by the network protocol driver as
- network traffic is processed. Most neighbor cache entries will timeout and be deleted if the network
- traffic stops. Neighbor cache entries that were inserted by Neighbors() may be static (will not
- timeout) or dynamic (will timeout).
-
- The implementation should follow the neighbor cache timeout mechanism which is defined in
- RFC4861. The default neighbor cache timeout value should be tuned for the expected network
- environment
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[in] DeleteFlag Set to TRUE to delete the specified cache entry, set to FALSE to
- add (or update, if it already exists and Override is TRUE) the
- specified cache entry. TargetIp6Address is used as the key
- to find the requested cache entry.
- @param[in] TargetIp6Address Pointer to the Target IPv6 address.
- @param[in] TargetLinkAddress Pointer to the link-layer address of the target. Ignored if NULL.
- @param[in] Timeout Time in 100-ns units that this entry will remain in the neighbor
- cache, it will be deleted after Timeout. A value of zero means that
- the entry is permanent. A non-zero value means that the entry is
- dynamic.
- @param[in] Override If TRUE, the cached link-layer address of the matching entry will
- be overridden and updated; if FALSE, EFI_ACCESS_DENIED
- will be returned if a corresponding cache entry already existed.
-
- @retval EFI_SUCCESS The data has been queued for transmission.
- @retval EFI_NOT_STARTED This instance has not been started.
- @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- - This is NULL.
- - TargetIpAddress is NULL.
- - *TargetLinkAddress is invalid when not NULL.
- - *TargetIpAddress is not a valid unicast IPv6 address.
- - *TargetIpAddress is one of the local configured IPv6
- addresses.
- @retval EFI_OUT_OF_RESOURCES Could not add the entry to the neighbor cache.
- @retval EFI_NOT_FOUND This entry is not in the neighbor cache (when DeleteFlag is
- TRUE or when DeleteFlag is FALSE while
- TargetLinkAddress is NULL.).
- @retval EFI_ACCESS_DENIED The to-be-added entry is already defined in the neighbor cache,
- and that entry is tagged as un-overridden (when Override
- is FALSE).
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Neighbors (
- IN EFI_IP6_PROTOCOL *This,
- IN BOOLEAN DeleteFlag,
- IN EFI_IPv6_ADDRESS *TargetIp6Address,
- IN EFI_MAC_ADDRESS *TargetLinkAddress OPTIONAL,
- IN UINT32 Timeout,
- IN BOOLEAN Override
- )
-{
- EFI_TPL OldTpl;
- EFI_STATUS Status;
- IP6_PROTOCOL *IpInstance;
- IP6_SERVICE *IpSb;
-
- if (This == NULL || TargetIp6Address == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (NetIp6IsUnspecifiedAddr (TargetIp6Address)) {
- return EFI_INVALID_PARAMETER;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
-
- if (IpSb->LinkLocalDadFail) {
- return EFI_DEVICE_ERROR;
- }
-
- if (!Ip6IsValidAddress (IpSb, TargetIp6Address, FALSE)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (TargetLinkAddress != NULL) {
- if (!Ip6IsValidLinkAddress (IpSb, TargetLinkAddress)) {
- return EFI_INVALID_PARAMETER;
- }
- }
-
- if (Ip6IsOneOfSetAddress (IpSb, TargetIp6Address, NULL, NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
- if (IpInstance->State != IP6_STATE_CONFIGED) {
- Status = EFI_NOT_STARTED;
- goto Exit;
- }
-
- if (DeleteFlag) {
- Status = Ip6DelNeighbor (IpInstance->Service, TargetIp6Address, TargetLinkAddress, Timeout, Override);
- } else {
- Status = Ip6AddNeighbor (IpInstance->Service, TargetIp6Address, TargetLinkAddress, Timeout, Override);
- }
-
-Exit:
- gBS->RestoreTPL (OldTpl);
- return Status;
-}
-
-/**
- Check whether the user's token or event has already
- been enqueue on IP6's list.
-
- @param[in] Map The container of either user's transmit or receive
- token.
- @param[in] Item Current item to check against.
- @param[in] Context The Token to check againist.
-
- @retval EFI_ACCESS_DENIED The token or event has already been enqueued in IP
- @retval EFI_SUCCESS The current item isn't the same token/event as the
- context.
-
-**/
-EFI_STATUS
-EFIAPI
-Ip6TokenExist (
- IN NET_MAP *Map,
- IN NET_MAP_ITEM *Item,
- IN VOID *Context
- )
-{
- EFI_IP6_COMPLETION_TOKEN *Token;
- EFI_IP6_COMPLETION_TOKEN *TokenInItem;
-
- Token = (EFI_IP6_COMPLETION_TOKEN *) Context;
- TokenInItem = (EFI_IP6_COMPLETION_TOKEN *) Item->Key;
-
- if (Token == TokenInItem || Token->Event == TokenInItem->Event) {
- return EFI_ACCESS_DENIED;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Validate the user's token against the current station address.
-
- @param[in] Token User's token to validate.
-
- @retval EFI_INVALID_PARAMETER Some parameters are invalid.
- @retval EFI_BAD_BUFFER_SIZE The user's option/data is too long.
- @retval EFI_SUCCESS The token is OK.
-
-**/
-EFI_STATUS
-Ip6TxTokenValid (
- IN EFI_IP6_COMPLETION_TOKEN *Token
- )
-{
- EFI_IP6_TRANSMIT_DATA *TxData;
- UINT32 Index;
- UINT32 DataLength;
-
- if (Token == NULL || Token->Event == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- TxData = Token->Packet.TxData;
-
- if (TxData == NULL || (TxData->ExtHdrsLength != 0 && TxData->ExtHdrs == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (TxData->FragmentCount == 0 || TxData->DataLength == 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- for (DataLength = 0, Index = 0; Index < TxData->FragmentCount; Index++) {
- if (TxData->FragmentTable[Index].FragmentLength == 0 || TxData->FragmentTable[Index].FragmentBuffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- DataLength += TxData->FragmentTable[Index].FragmentLength;
- }
-
- if (TxData->DataLength != DataLength) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // TODO: Token.Packet.TxData.DataLength is too short to transmit.
- // return EFI_BUFFER_TOO_SMALL;
- //
-
- //
- // If Token.Packet.TxData.DataLength is beyond the maximum that which can be
- // described through the Fragment Offset field in Fragment header when performing
- // fragmentation.
- //
- if (TxData->DataLength > 64 * 1024) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- The callback function for the net buffer which wraps the user's
- transmit token. Although this function seems simple, there
- are some subtle aspects.
- When user requests the IP to transmit a packet by passing it a
- token, the token is wrapped in an IP6_TXTOKEN_WRAP and the data
- is wrapped in an net buffer. The net buffer's Free function is
- set to Ip6FreeTxToken. The Token and token wrap are added to the
- IP child's TxToken map. Then the buffer is passed to Ip6Output for
- transmission. If an error happened before that, the buffer
- is freed, which in turn frees the token wrap. The wrap may
- have been added to the TxToken map or not, and the user's event
- shouldn't be fired because we are still in the EfiIp6Transmit. If
- the buffer has been sent by Ip6Output, it should be removed from
- the TxToken map and user's event signaled. The token wrap and buffer
- are bound together. Check the comments in Ip6Output for information
- about IP fragmentation.
-
- @param[in] Context The token's wrap.
-
-**/
-VOID
-EFIAPI
-Ip6FreeTxToken (
- IN VOID *Context
- )
-{
- IP6_TXTOKEN_WRAP *Wrap;
- NET_MAP_ITEM *Item;
-
- Wrap = (IP6_TXTOKEN_WRAP *) Context;
-
- //
- // Signal IpSecRecycleEvent to inform IPsec free the memory
- //
- if (Wrap->IpSecRecycleSignal != NULL) {
- gBS->SignalEvent (Wrap->IpSecRecycleSignal);
- }
-
- //
- // Find the token in the instance's map. EfiIp6Transmit put the
- // token to the map. If that failed, NetMapFindKey will return NULL.
- //
- Item = NetMapFindKey (&Wrap->IpInstance->TxTokens, Wrap->Token);
-
- if (Item != NULL) {
- NetMapRemoveItem (&Wrap->IpInstance->TxTokens, Item, NULL);
- }
-
- if (Wrap->Sent) {
- gBS->SignalEvent (Wrap->Token->Event);
-
- //
- // Dispatch the DPC queued by the NotifyFunction of Token->Event.
- //
- DispatchDpc ();
- }
-
- FreePool (Wrap);
-}
-
-
-/**
- The callback function to Ip6Output to update the transmit status.
-
- @param[in] Packet The user's transmit packet.
- @param[in] IoStatus The result of the transmission.
- @param[in] Flag Not used during transmission.
- @param[in] Context The token's wrap.
-
-**/
-VOID
-Ip6OnPacketSent (
- IN NET_BUF *Packet,
- IN EFI_STATUS IoStatus,
- IN UINT32 Flag,
- IN VOID *Context
- )
-{
- IP6_TXTOKEN_WRAP *Wrap;
-
- //
- // This is the transmission request from upper layer,
- // not the IP6 driver itself.
- //
- Wrap = (IP6_TXTOKEN_WRAP *) Context;
- Wrap->Token->Status = IoStatus;
-
- NetbufFree (Wrap->Packet);
-}
-
-/**
- Places outgoing data packets into the transmit queue.
-
- The Transmit() function places a sending request in the transmit queue of this
- EFI IPv6 Protocol instance. Whenever the packet in the token is sent out or some
- errors occur, the event in the token will be signaled, and the status is updated.
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[in] Token Pointer to the transmit token.
-
- @retval EFI_SUCCESS The data has been queued for transmission.
- @retval EFI_NOT_STARTED This instance has not been started.
- @retval EFI_NO_MAPPING The IPv6 driver was responsible for choosing
- a source address for this transmission,
- but no source address was available for use.
- @retval EFI_INVALID_PARAMETER One or more of the following is TRUE:
- - This is NULL.
- - Token is NULL.
- - Token.Event is NULL.
- - Token.Packet.TxData is NULL.
- - Token.Packet.ExtHdrsLength is not zero and
- Token.Packet.ExtHdrs is NULL.
- - Token.Packet.FragmentCount is zero.
- - One or more of the Token.Packet.TxData.
- FragmentTable[].FragmentLength fields is zero.
- - One or more of the Token.Packet.TxData.
- FragmentTable[].FragmentBuffer fields is NULL.
- - Token.Packet.TxData.DataLength is zero or not
- equal to the sum of fragment lengths.
- - Token.Packet.TxData.DestinationAddress is non
- zero when DestinationAddress is configured as
- non-zero when doing Configure() for this
- EFI IPv6 protocol instance.
- - Token.Packet.TxData.DestinationAddress is
- unspecified when DestinationAddress is unspecified
- when doing Configure() for this EFI IPv6 protocol
- instance.
- @retval EFI_ACCESS_DENIED The transmit completion token with the same Token.
- Event was already in the transmit queue.
- @retval EFI_NOT_READY The completion token could not be queued because
- the transmit queue is full.
- @retval EFI_NOT_FOUND Not route is found to destination address.
- @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data.
- @retval EFI_BUFFER_TOO_SMALL Token.Packet.TxData.TotalDataLength is too
- short to transmit.
- @retval EFI_BAD_BUFFER_SIZE If Token.Packet.TxData.DataLength is beyond the
- maximum that which can be described through the
- Fragment Offset field in Fragment header when
- performing fragmentation.
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Transmit (
- IN EFI_IP6_PROTOCOL *This,
- IN EFI_IP6_COMPLETION_TOKEN *Token
- )
-{
- IP6_SERVICE *IpSb;
- IP6_PROTOCOL *IpInstance;
- EFI_IP6_CONFIG_DATA *Config;
- EFI_STATUS Status;
- EFI_TPL OldTpl;
- EFI_IP6_HEADER Head;
- EFI_IP6_TRANSMIT_DATA *TxData;
- EFI_IP6_OVERRIDE_DATA *Override;
- IP6_TXTOKEN_WRAP *Wrap;
- UINT8 *ExtHdrs;
-
- //
- // Check input parameters.
- //
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- ExtHdrs = NULL;
-
- Status = Ip6TxTokenValid (Token);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
-
- if (IpSb->LinkLocalDadFail) {
- return EFI_DEVICE_ERROR;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
-
- if (IpInstance->State != IP6_STATE_CONFIGED) {
- Status = EFI_NOT_STARTED;
- goto Exit;
- }
-
- Config = &IpInstance->ConfigData;
-
- //
- // Check whether the token or signal already existed.
- //
- if (EFI_ERROR (NetMapIterate (&IpInstance->TxTokens, Ip6TokenExist, Token))) {
- Status = EFI_ACCESS_DENIED;
- goto Exit;
- }
-
- //
- // Build the IP header, fill in the information from ConfigData or OverrideData
- //
- ZeroMem (&Head, sizeof(EFI_IP6_HEADER));
- TxData = Token->Packet.TxData;
- IP6_COPY_ADDRESS (&Head.SourceAddress, &Config->StationAddress);
- IP6_COPY_ADDRESS (&Head.DestinationAddress, &Config->DestinationAddress);
-
- Status = EFI_INVALID_PARAMETER;
-
- if (NetIp6IsUnspecifiedAddr (&TxData->DestinationAddress)) {
- if (NetIp6IsUnspecifiedAddr (&Config->DestinationAddress)) {
- goto Exit;
- }
-
- ASSERT (!NetIp6IsUnspecifiedAddr (&Config->StationAddress));
-
- } else {
- //
- // StationAddress is unspecified only when ConfigData.Dest is unspecified.
- // Use TxData.Dest to override the DestinationAddress.
- //
- if (!NetIp6IsUnspecifiedAddr (&Config->DestinationAddress)) {
- goto Exit;
- }
-
- if (NetIp6IsUnspecifiedAddr (&Config->StationAddress)) {
- Status = Ip6SelectSourceAddress (
- IpSb,
- &TxData->DestinationAddress,
- &Head.SourceAddress
- );
- if (EFI_ERROR (Status)) {
- goto Exit;
- }
- }
-
- IP6_COPY_ADDRESS (&Head.DestinationAddress, &TxData->DestinationAddress);
- }
-
- //
- // Fill in Head infos.
- //
- Head.NextHeader = Config->DefaultProtocol;
- if (TxData->ExtHdrsLength != 0) {
- Head.NextHeader = TxData->NextHeader;
- }
-
- if (TxData->OverrideData != NULL) {
- Override = TxData->OverrideData;
- Head.NextHeader = Override->Protocol;
- Head.HopLimit = Override->HopLimit;
- Head.FlowLabelL = HTONS ((UINT16) Override->FlowLabel);
- Head.FlowLabelH = (UINT8) ((Override->FlowLabel >> 16) & 0x0F);
- } else {
- Head.HopLimit = Config->HopLimit;
- Head.FlowLabelL = HTONS ((UINT16) Config->FlowLabel);
- Head.FlowLabelH = (UINT8) ((Config->FlowLabel >> 16) & 0x0F);
- }
-
- Head.PayloadLength = HTONS ((UINT16) (TxData->ExtHdrsLength + TxData->DataLength));
-
- //
- // OK, it survives all the validation check. Wrap the token in
- // a IP6_TXTOKEN_WRAP and the data in a netbuf
- //
- Status = EFI_OUT_OF_RESOURCES;
- Wrap = AllocateZeroPool (sizeof (IP6_TXTOKEN_WRAP));
- if (Wrap == NULL) {
- goto Exit;
- }
-
- Wrap->IpInstance = IpInstance;
- Wrap->Token = Token;
- Wrap->Sent = FALSE;
- Wrap->Life = IP6_US_TO_SEC (Config->TransmitTimeout);
- Wrap->Packet = NetbufFromExt (
- (NET_FRAGMENT *) TxData->FragmentTable,
- TxData->FragmentCount,
- IP6_MAX_HEADLEN,
- 0,
- Ip6FreeTxToken,
- Wrap
- );
-
- if (Wrap->Packet == NULL) {
- FreePool (Wrap);
- goto Exit;
- }
-
- Token->Status = EFI_NOT_READY;
-
- Status = NetMapInsertTail (&IpInstance->TxTokens, Token, Wrap);
- if (EFI_ERROR (Status)) {
- //
- // NetbufFree will call Ip6FreeTxToken, which in turn will
- // free the IP6_TXTOKEN_WRAP. Now, the token wrap hasn't been
- // enqueued.
- //
- NetbufFree (Wrap->Packet);
- goto Exit;
- }
-
- //
- // Allocate a new buffer to store IPv6 extension headers to avoid updating
- // the original data in EFI_IP6_COMPLETION_TOKEN.
- //
- if (TxData->ExtHdrsLength != 0 && TxData->ExtHdrs != NULL) {
- ExtHdrs = (UINT8 *) AllocateCopyPool (TxData->ExtHdrsLength, TxData->ExtHdrs);
- if (ExtHdrs == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto Exit;
- }
- }
-
- //
- // Mark the packet sent before output it. Mark it not sent again if the
- // returned status is not EFI_SUCCESS;
- //
- Wrap->Sent = TRUE;
-
- Status = Ip6Output (
- IpSb,
- NULL,
- IpInstance,
- Wrap->Packet,
- &Head,
- ExtHdrs,
- TxData->ExtHdrsLength,
- Ip6OnPacketSent,
- Wrap
- );
- if (EFI_ERROR (Status)) {
- Wrap->Sent = FALSE;
- NetbufFree (Wrap->Packet);
- }
-
-Exit:
- gBS->RestoreTPL (OldTpl);
-
- if (ExtHdrs != NULL) {
- FreePool (ExtHdrs);
- }
-
- return Status;
-}
-
-/**
- Places a receiving request into the receiving queue.
-
- The Receive() function places a completion token into the receive packet queue.
- This function is always asynchronous.
-
- The Token.Event field in the completion token must be filled in by the caller
- and cannot be NULL. When the receive operation completes, the EFI IPv6 Protocol
- driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event
- is signaled.
-
- Current Udp implementation creates an IP child for each Udp child.
- It initates a asynchronous receive immediately no matter whether
- there is no mapping or not. Therefore, disable the returning EFI_NO_MAPPING for now.
- To enable it, the following check must be performed:
-
- if (NetIp6IsUnspecifiedAddr (&Config->StationAddress) && IP6_NO_MAPPING (IpInstance)) {
- Status = EFI_NO_MAPPING;
- goto Exit;
- }
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[in] Token Pointer to a token that is associated with the receive data descriptor.
-
- @retval EFI_SUCCESS The receive completion token was cached.
- @retval EFI_NOT_STARTED This EFI IPv6 Protocol instance has not been started.
- @retval EFI_NO_MAPPING When IP6 driver responsible for binding source address to this instance,
- while no source address is available for use.
- @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- - This is NULL.
- - Token is NULL.
- - Token.Event is NULL.
- @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system
- resources (usually memory).
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
- The EFI IPv6 Protocol instance has been reset to startup defaults.
- @retval EFI_ACCESS_DENIED The receive completion token with the same Token.Event was already
- in the receive queue.
- @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Receive (
- IN EFI_IP6_PROTOCOL *This,
- IN EFI_IP6_COMPLETION_TOKEN *Token
- )
-{
- IP6_PROTOCOL *IpInstance;
- EFI_STATUS Status;
- EFI_TPL OldTpl;
- IP6_SERVICE *IpSb;
-
- if (This == NULL || Token == NULL || Token->Event == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
-
- if (IpSb->LinkLocalDadFail) {
- return EFI_DEVICE_ERROR;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
-
- if (IpInstance->State != IP6_STATE_CONFIGED) {
- Status = EFI_NOT_STARTED;
- goto Exit;
- }
-
- //
- // Check whether the toke is already on the receive queue.
- //
- Status = NetMapIterate (&IpInstance->RxTokens, Ip6TokenExist, Token);
-
- if (EFI_ERROR (Status)) {
- Status = EFI_ACCESS_DENIED;
- goto Exit;
- }
-
- //
- // Queue the token then check whether there is pending received packet.
- //
- Status = NetMapInsertTail (&IpInstance->RxTokens, Token, NULL);
-
- if (EFI_ERROR (Status)) {
- goto Exit;
- }
-
- Status = Ip6InstanceDeliverPacket (IpInstance);
-
- //
- // Dispatch the DPC queued by the NotifyFunction of this instane's receive
- // event.
- //
- DispatchDpc ();
-
-Exit:
- gBS->RestoreTPL (OldTpl);
- return Status;
-}
-
-
-/**
- Cancel the transmitted but not recycled packet. If a matching
- token is found, it will call Ip6CancelPacket to cancel the
- packet. Ip6CancelPacket cancels all the fragments of the
- packet. When all the fragments are freed, the IP6_TXTOKEN_WRAP
- is deleted from the Map, and user's event is signalled.
- Because Ip6CancelPacket and other functions are all called in
- line, after Ip6CancelPacket returns, the Item has been freed.
-
- @param[in] Map The IP6 child's transmit queue.
- @param[in] Item The current transmitted packet to test.
- @param[in] Context The user's token to cancel.
-
- @retval EFI_SUCCESS Continue to check the next Item.
- @retval EFI_ABORTED The user's Token (Token != NULL) is cancelled.
-
-**/
-EFI_STATUS
-EFIAPI
-Ip6CancelTxTokens (
- IN NET_MAP *Map,
- IN NET_MAP_ITEM *Item,
- IN VOID *Context
- )
-{
- EFI_IP6_COMPLETION_TOKEN *Token;
- IP6_TXTOKEN_WRAP *Wrap;
-
- Token = (EFI_IP6_COMPLETION_TOKEN *) Context;
-
- //
- // Return EFI_SUCCESS to check the next item in the map if
- // this one doesn't match.
- //
- if ((Token != NULL) && (Token != Item->Key)) {
- return EFI_SUCCESS;
- }
-
- Wrap = (IP6_TXTOKEN_WRAP *) Item->Value;
- ASSERT (Wrap != NULL);
-
- //
- // Don't access the Item, Wrap and Token's members after this point.
- // Item and wrap has been freed. And we no longer own the Token.
- //
- Ip6CancelPacket (Wrap->IpInstance->Interface, Wrap->Packet, EFI_ABORTED);
-
- //
- // If only one item is to be cancel, return EFI_ABORTED to stop
- // iterating the map any more.
- //
- if (Token != NULL) {
- return EFI_ABORTED;
- }
-
- return EFI_SUCCESS;
-}
-
-
-/**
- Cancel the receive request. This is simple, because
- it is only enqueued in our local receive map.
-
- @param[in] Map The IP6 child's receive queue.
- @param[in] Item Current receive request to cancel.
- @param[in] Context The user's token to cancel.
-
-
- @retval EFI_SUCCESS Continue to check the next receive request on the
- queue.
- @retval EFI_ABORTED The user's token (token != NULL) has been
- cancelled.
-
-**/
-EFI_STATUS
-EFIAPI
-Ip6CancelRxTokens (
- IN NET_MAP *Map,
- IN NET_MAP_ITEM *Item,
- IN VOID *Context
- )
-{
- EFI_IP6_COMPLETION_TOKEN *Token;
- EFI_IP6_COMPLETION_TOKEN *This;
-
- Token = (EFI_IP6_COMPLETION_TOKEN *) Context;
- This = Item->Key;
-
- if ((Token != NULL) && (Token != This)) {
- return EFI_SUCCESS;
- }
-
- NetMapRemoveItem (Map, Item, NULL);
-
- This->Status = EFI_ABORTED;
- This->Packet.RxData = NULL;
- gBS->SignalEvent (This->Event);
-
- if (Token != NULL) {
- return EFI_ABORTED;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Cancel the user's receive/transmit request. It is the worker function of
- EfiIp6Cancel API.
-
- @param[in] IpInstance The IP6 child.
- @param[in] Token The token to cancel. If NULL, all token will be
- cancelled.
-
- @retval EFI_SUCCESS The token is cancelled.
- @retval EFI_NOT_FOUND The token isn't found on either the
- transmit/receive queue.
- @retval EFI_DEVICE_ERROR Not all tokens are cancelled when Token is NULL.
-
-**/
-EFI_STATUS
-Ip6Cancel (
- IN IP6_PROTOCOL *IpInstance,
- IN EFI_IP6_COMPLETION_TOKEN *Token OPTIONAL
- )
-{
- EFI_STATUS Status;
-
- //
- // First check the transmitted packet. Ip6CancelTxTokens returns
- // EFI_ABORTED to mean that the token has been cancelled when
- // token != NULL. So, return EFI_SUCCESS for this condition.
- //
- Status = NetMapIterate (&IpInstance->TxTokens, Ip6CancelTxTokens, Token);
- if (EFI_ERROR (Status)) {
- if ((Token != NULL) && (Status == EFI_ABORTED)) {
- return EFI_SUCCESS;
- }
-
- return Status;
- }
-
- //
- // Check the receive queue. Ip6CancelRxTokens also returns EFI_ABORT
- // for Token!=NULL and it is cancelled.
- //
- Status = NetMapIterate (&IpInstance->RxTokens, Ip6CancelRxTokens, Token);
- //
- // Dispatch the DPCs queued by the NotifyFunction of the canceled rx token's
- // events.
- //
- DispatchDpc ();
- if (EFI_ERROR (Status)) {
- if ((Token != NULL) && (Status == EFI_ABORTED)) {
- return EFI_SUCCESS;
- }
-
- return Status;
- }
-
- //
- // OK, if the Token is found when Token != NULL, the NetMapIterate
- // will return EFI_ABORTED, which has been interrupted as EFI_SUCCESS.
- //
- if (Token != NULL) {
- return EFI_NOT_FOUND;
- }
-
- //
- // If Token == NULL, cancel all the tokens. return error if not
- // all of them are cancelled.
- //
- if (!NetMapIsEmpty (&IpInstance->TxTokens) || !NetMapIsEmpty (&IpInstance->RxTokens)) {
-
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Abort an asynchronous transmit or receive request.
-
- The Cancel() function is used to abort a pending transmit or receive request.
- If the token is in the transmit or receive request queues, after calling this
- function, Token->Status will be set to EFI_ABORTED, and then Token->Event will
- be signaled. If the token is not in one of the queues, which usually means the
- asynchronous operation has completed, this function will not signal the token,
- and EFI_NOT_FOUND is returned.
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
- @param[in] Token Pointer to a token that has been issued by
- EFI_IP6_PROTOCOL.Transmit() or
- EFI_IP6_PROTOCOL.Receive(). If NULL, all pending
- tokens are aborted. Type EFI_IP6_COMPLETION_TOKEN is
- defined in EFI_IP6_PROTOCOL.Transmit().
-
- @retval EFI_SUCCESS The asynchronous I/O request was aborted and
- Token->Event was signaled. When Token is NULL, all
- pending requests were aborted, and their events were signaled.
- @retval EFI_INVALID_PARAMETER This is NULL.
- @retval EFI_NOT_STARTED This instance has not been started.
- @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was
- not found in the transmit or receive queue. It has either completed
- or was not issued by Transmit() and Receive().
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Cancel (
- IN EFI_IP6_PROTOCOL *This,
- IN EFI_IP6_COMPLETION_TOKEN *Token OPTIONAL
- )
-{
- IP6_PROTOCOL *IpInstance;
- EFI_STATUS Status;
- EFI_TPL OldTpl;
-
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
-
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
-
- if (IpInstance->State != IP6_STATE_CONFIGED) {
- Status = EFI_NOT_STARTED;
- goto Exit;
- }
-
- Status = Ip6Cancel (IpInstance, Token);
-
-Exit:
- gBS->RestoreTPL (OldTpl);
- return Status;
-}
-
-/**
- Polls for incoming data packets, and processes outgoing data packets.
-
- The Poll() function polls for incoming data packets and processes outgoing data
- packets. Network drivers and applications can call the EFI_IP6_PROTOCOL.Poll()
- function to increase the rate that data packets are moved between the communications
- device and the transmit and receive queues.
-
- In some systems the periodic timer event may not poll the underlying communications
- device fast enough to transmit and/or receive all data packets without missing
- incoming packets or dropping outgoing packets. Drivers and applications that are
- experiencing packet loss should try calling the EFI_IP6_PROTOCOL.Poll() function
- more often.
-
- @param[in] This Pointer to the EFI_IP6_PROTOCOL instance.
-
- @retval EFI_SUCCESS Incoming or outgoing data was processed.
- @retval EFI_NOT_STARTED This EFI IPv6 Protocol instance has not been started.
- @retval EFI_INVALID_PARAMETER This is NULL.
- @retval EFI_DEVICE_ERROR An unexpected system error or network error occurred.
- @retval EFI_NOT_READY No incoming or outgoing data was processed.
- @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue.
- Consider increasing the polling rate.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiIp6Poll (
- IN EFI_IP6_PROTOCOL *This
- )
-{
- IP6_PROTOCOL *IpInstance;
- IP6_SERVICE *IpSb;
- EFI_MANAGED_NETWORK_PROTOCOL *Mnp;
-
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- IpInstance = IP6_INSTANCE_FROM_PROTOCOL (This);
- IpSb = IpInstance->Service;
-
- if (IpSb->LinkLocalDadFail) {
- return EFI_DEVICE_ERROR;
- }
-
- if (IpInstance->State == IP6_STATE_UNCONFIGED) {
- return EFI_NOT_STARTED;
- }
-
- Mnp = IpInstance->Service->Mnp;
-
- //
- // Don't lock the Poll function to enable the deliver of
- // the packet polled up.
- //
- return Mnp->Poll (Mnp);
-
-}
-
|