diff options
Diffstat (limited to 'NetworkPkg/IpSecDxe/IkeService.c')
| -rw-r--r-- | NetworkPkg/IpSecDxe/IkeService.c | 92 |
1 files changed, 47 insertions, 45 deletions
diff --git a/NetworkPkg/IpSecDxe/IkeService.c b/NetworkPkg/IpSecDxe/IkeService.c index 8def212dae..2ea5962537 100644 --- a/NetworkPkg/IpSecDxe/IkeService.c +++ b/NetworkPkg/IpSecDxe/IkeService.c @@ -1,6 +1,6 @@ /** @file
Provide IPsec Key Exchange (IKE) service general interfaces.
-
+
Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
@@ -104,13 +104,13 @@ IkeLookupUdp ( /**
Configure a UDPIO's UDP4 instance.
-
- This fuction is called by the UdpIoCreateIo() to configures a
+
+ This fuction is called by the UdpIoCreateIo() to configures a
UDP4 instance.
-
+
@param[in] UdpIo The UDP_IO to be configured.
@param[in] Context User-defined data when calling UdpIoCreateIo().
-
+
@retval EFI_SUCCESS The configuration succeeded.
@retval Others The UDP4 instance fails to configure.
@@ -146,13 +146,13 @@ IkeConfigUdp4 ( /**
Configure a UDPIO's UDP6 instance.
-
- This fuction is called by the UdpIoCreateIo()to configure a
+
+ This fuction is called by the UdpIoCreateIo()to configure a
UDP6 instance.
-
+
@param[in] UdpIo The UDP_IO to be configured.
@param[in] Context User-defined data when calling UdpIoCreateIo().
-
+
@retval EFI_SUCCESS The configuration succeeded.
@retval Others The configuration fails.
@@ -194,14 +194,14 @@ IkeConfigUdp6 ( /**
Open and configure the related output UDPIO for IKE packet sending.
-
- If the UdpService is not configured, this fuction calls UdpIoCreatIo() to
+
+ If the UdpService is not configured, this fuction calls UdpIoCreatIo() to
create UDPIO to bind this UdpService for IKE packet sending. If the UdpService
has already been configured, then return.
-
+
@param[in] UdpService The UDP_IO to be configured.
@param[in] RemoteIp User-defined data when calling UdpIoCreateIo().
-
+
@retval EFI_SUCCESS The configuration is successful.
@retval Others The configuration fails.
@@ -340,16 +340,16 @@ ON_EXIT: /**
Open and configure a UDPIO of Udp4 for IKE packet receiving.
-
- This function is called at the IPsecDriverBinding start. IPsec create a UDP4 and
+
+ This function is called at the IPsecDriverBinding start. IPsec create a UDP4 and
UDP4 IO for each NIC handle.
-
+
@param[in] Private Point to IPSEC_PRIVATE_DATA
@param[in] Controller Handler for NIC card.
-
+
@retval EFI_SUCCESS The Operation is successful.
@retval EFI_OUT_OF_RESOURCE The required system resource can't be allocated.
-
+
**/
EFI_STATUS
IkeOpenInputUdp4 (
@@ -411,16 +411,16 @@ IkeOpenInputUdp4 ( /**
Open and configure a UDPIO of Udp6 for IKE packet receiving.
-
+
This function is called at the IPsecDriverBinding start. IPsec create a UDP6 and UDP6
IO for each NIC handle.
-
+
@param[in] Private Point to IPSEC_PRIVATE_DATA
@param[in] Controller Handler for NIC card.
-
+
@retval EFI_SUCCESS The Operation is successful.
@retval EFI_OUT_OF_RESOURCE The required system resource can't be allocated.
-
+
**/
EFI_STATUS
IkeOpenInputUdp6 (
@@ -479,18 +479,18 @@ IkeOpenInputUdp6 ( /**
The general interface of starting IPsec Key Exchange.
-
+
This function is called when a IKE negotiation to start getting a Key.
-
- @param[in] UdpService Point to IKE_UDP_SERVICE which will be used for
+
+ @param[in] UdpService Point to IKE_UDP_SERVICE which will be used for
IKE packet sending.
@param[in] SpdEntry Point to the SPD entry related to the IKE negotiation.
@param[in] RemoteIp Point to EFI_IP_ADDRESS related to the IKE negotiation.
-
+
@retval EFI_SUCCESS The Operation is successful.
@retval EFI_ACCESS_DENIED No related PAD entry was found.
@retval EFI_INVALID_PARAMETER The IKE version is not supported.
-
+
**/
EFI_STATUS
IkeNegotiate (
@@ -519,8 +519,8 @@ IkeNegotiate ( }
//
// Try to find the IKE SA session in the IKEv1 and IKEv2 established SA session list.
- //
- IkeSaSession = (UINT8 *) Ikev2SaSessionLookup (&Private->Ikev2EstablishedList, RemoteIp);
+ //
+ IkeSaSession = (UINT8 *) Ikev2SaSessionLookup (&Private->Ikev2EstablishedList, RemoteIp);
if (IkeSaSession == NULL) {
@@ -551,7 +551,7 @@ IkeNegotiate ( if (IkeVersion != 2) {
return EFI_INVALID_PARAMETER;
}
-
+
Exchange = mIkeExchange[IkeVersion - 1];
//
// Start the quick mode stage to negotiate child SA.
@@ -564,15 +564,15 @@ IkeNegotiate ( /**
The generic interface when receive a IKE packet.
-
+
This function is called when UDP IO receives a IKE packet.
-
+
@param[in] Packet Point to received IKE packet.
- @param[in] EndPoint Point to UDP_END_POINT which contains the information of
+ @param[in] EndPoint Point to UDP_END_POINT which contains the information of
Remote IP and Port.
@param[in] IoStatus The Status of Recieve Token.
@param[in] Context Point to data passed from the caller.
-
+
**/
VOID
EFIAPI
@@ -687,17 +687,19 @@ ON_EXIT: /**
Delete all established IKE SAs and related Child SAs.
-
- This function is the subfunction of the IpSecCleanupAllSa(). It first calls
- IkeDeleteChildSa() to delete all Child SAs then send out the related
+
+ This function is the subfunction of the IpSecCleanupAllSa(). It first calls
+ IkeDeleteChildSa() to delete all Child SAs then send out the related
Information packet.
- @param[in] Private Pointer of the IPSEC_PRIVATE_DATA
+ @param[in] Private Pointer of the IPSEC_PRIVATE_DATA
+ @param[in] IsDisableIPsec Indicate whether needs to disable IPsec.
**/
VOID
IkeDeleteAllSas (
- IN IPSEC_PRIVATE_DATA *Private
+ IN IPSEC_PRIVATE_DATA *Private,
+ IN BOOLEAN IsDisableIpsec
)
{
LIST_ENTRY *Entry;
@@ -719,17 +721,17 @@ IkeDeleteAllSas ( //
if (!IsListEmpty (&Private->Ikev2SessionList)) {
NET_LIST_FOR_EACH_SAFE (Entry, NextEntry, &Private->Ikev2SessionList) {
- Ikev2SaSession = IKEV2_SA_SESSION_BY_SESSION (Entry);
+ Ikev2SaSession = IKEV2_SA_SESSION_BY_SESSION (Entry);
RemoveEntryList (Entry);
Ikev2SaSessionFree (Ikev2SaSession);
}
}
-
+
//
// If there is no existing established IKE SA, set the Ipsec DisableFlag to TRUE
// and turn off the IsIPsecDisabling flag.
//
- if (IsListEmpty (&Private->Ikev2EstablishedList)) {
+ if (IsListEmpty (&Private->Ikev2EstablishedList) && IsDisableIpsec) {
Value = IPSEC_STATUS_DISABLED;
Status = gRT->SetVariable (
IPSECCONFIG_STATUS_NAME,
@@ -752,7 +754,7 @@ IkeDeleteAllSas ( for (Entry = Private->Ikev2EstablishedList.ForwardLink; Entry != &Private->Ikev2EstablishedList;) {
Ikev2SaSession = IKEV2_SA_SESSION_BY_SESSION (Entry);
Entry = Entry->ForwardLink;
-
+
Ikev2SaSession->SessionCommon.State = IkeStateSaDeleting;
//
@@ -762,10 +764,10 @@ IkeDeleteAllSas ( if (IkeVersion == 2) {
Exchange = mIkeExchange[IkeVersion - 1];
Exchange->NegotiateInfo((UINT8*)Ikev2SaSession, NULL);
- }
+ }
}
}
-
+
}
|