diff options
Diffstat (limited to 'NetworkPkg/IpSecDxe/IkeService.c')
-rw-r--r-- | NetworkPkg/IpSecDxe/IkeService.c | 769 |
1 files changed, 769 insertions, 0 deletions
diff --git a/NetworkPkg/IpSecDxe/IkeService.c b/NetworkPkg/IpSecDxe/IkeService.c new file mode 100644 index 0000000000..0550534f9c --- /dev/null +++ b/NetworkPkg/IpSecDxe/IkeService.c @@ -0,0 +1,769 @@ +/** @file
+ Provide IPsec Key Exchange (IKE) service general interfaces.
+
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "IkeService.h"
+#include "IpSecConfigImpl.h"
+#include "Ikev2/Utility.h"
+
+IKE_EXCHANGE_INTERFACE *mIkeExchange[] = {
+ &mIkev1Exchange,
+ &mIkev2Exchange
+};
+
+EFI_UDP4_CONFIG_DATA mUdp4Conf = {
+ FALSE,
+ FALSE,
+ FALSE,
+ TRUE,
+ //
+ // IO parameters
+ //
+ 0,
+ 64,
+ FALSE,
+ 0,
+ 1000000,
+ FALSE,
+ {0,0,0,0},
+ {0,0,0,0},
+ IKE_DEFAULT_PORT,
+ {0,0,0,0},
+ 0
+};
+
+EFI_UDP6_CONFIG_DATA mUdp6Conf = {
+ FALSE,
+ FALSE,
+ TRUE,
+ //
+ // IO parameters
+ //
+ 0,
+ 128,
+ 0,
+ 1000000,
+ //Access Point
+ {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0},
+ IKE_DEFAULT_PORT,
+ {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0},
+ 0
+};
+
+/**
+ Check if the NIC handle is binded to a Udp service.
+
+ @param[in] Private Pointer of IPSEC_PRIVATE_DATA.
+ @param[in] NicHandle The Handle of the NIC card.
+ @param[in] IpVersion The version of the IP stack.
+
+ @return a pointer of IKE_UDP_SERVICE.
+
+**/
+IKE_UDP_SERVICE *
+IkeLookupUdp (
+ IN IPSEC_PRIVATE_DATA *Private,
+ IN EFI_HANDLE Handle,
+ IN UINT8 IpVersion
+ )
+{
+ LIST_ENTRY *Head;
+ LIST_ENTRY *Entry;
+ LIST_ENTRY *Next;
+ IKE_UDP_SERVICE *Udp;
+
+ Udp = NULL;
+ Head = (IpVersion == IP_VERSION_4) ? &Private->Udp4List : &Private->Udp6List;
+
+ NET_LIST_FOR_EACH_SAFE (Entry, Next, Head) {
+
+ Udp = IPSEC_UDP_SERVICE_FROM_LIST (Entry);
+ //
+ // Find the right udp service which installed on the appointed NIC handle.
+ //
+ if (Handle == Udp->NicHandle) {
+ break;
+ } else {
+ Udp = NULL;
+ }
+ }
+
+ return Udp;
+}
+
+/**
+ Configure a UDPIO's UDP4 instance.
+
+ This fuction is called by the UdpIoCreateIo() to configures a
+ UDP4 instance.
+
+ @param[in] UdpIo The UDP_IO to be configured.
+ @param[in] Context User-defined data when calling UdpIoCreateIo().
+
+ @retval EFI_SUCCESS The configuration succeeded.
+ @retval Others The UDP4 instance fails to configure.
+
+**/
+EFI_STATUS
+IkeConfigUdp4 (
+ IN UDP_IO *UdpIo,
+ IN VOID *Context
+ )
+{
+ EFI_UDP4_CONFIG_DATA Udp4Cfg;
+ EFI_UDP4_PROTOCOL *Udp4;
+
+ ZeroMem (&Udp4Cfg, sizeof (EFI_UDP4_CONFIG_DATA));
+
+ Udp4 = UdpIo->Protocol.Udp4;
+ CopyMem (
+ &Udp4Cfg,
+ &mUdp4Conf,
+ sizeof (EFI_UDP4_CONFIG_DATA)
+ );
+
+ if (Context != NULL) {
+ //
+ // Configure udp4 io with local default address.
+ //
+ Udp4Cfg.UseDefaultAddress = TRUE;
+ }
+
+ return Udp4->Configure (Udp4, &Udp4Cfg);
+}
+
+/**
+ Configure a UDPIO's UDP6 instance.
+
+ This fuction is called by the UdpIoCreateIo()to configure a
+ UDP6 instance.
+
+ @param[in] UdpIo The UDP_IO to be configured.
+ @param[in] Context User-defined data when calling UdpIoCreateIo().
+
+ @retval EFI_SUCCESS The configuration succeeded.
+ @retval Others The configuration fails.
+
+**/
+EFI_STATUS
+IkeConfigUdp6 (
+ IN UDP_IO *UdpIo,
+ IN VOID *Context
+ )
+{
+ EFI_UDP6_PROTOCOL *Udp6;
+ EFI_UDP6_CONFIG_DATA Udp6Cfg;
+
+ ZeroMem (&Udp6Cfg, sizeof (EFI_UDP6_CONFIG_DATA));
+
+ Udp6 = UdpIo->Protocol.Udp6;
+ CopyMem (
+ &Udp6Cfg,
+ &mUdp6Conf,
+ sizeof (EFI_UDP6_CONFIG_DATA)
+ );
+
+ if (Context != NULL) {
+ //
+ // Configure instance with a destination address to start source address
+ // selection, and then get the configure data from the mode data to store
+ // the source address.
+ //
+ CopyMem (
+ &Udp6Cfg.RemoteAddress,
+ Context,
+ sizeof (EFI_IPv6_ADDRESS)
+ );
+ }
+
+ return Udp6->Configure (Udp6, &Udp6Cfg);
+}
+
+/**
+ Open and configure the related output UDPIO for IKE packet sending.
+
+ If the UdpService is not configured, this fuction calls UdpIoCreatIo() to
+ create UDPIO to bind this UdpService for IKE packet sending. If the UdpService
+ has already been configured, then return.
+
+ @param[in] UdpService The UDP_IO to be configured.
+ @param[in] RemoteIp User-defined data when calling UdpIoCreateIo().
+
+ @retval EFI_SUCCESS The configuration is successful.
+ @retval Others The configuration fails.
+
+**/
+EFI_STATUS
+IkeOpenOutputUdp (
+ IN IKE_UDP_SERVICE *UdpService,
+ IN EFI_IP_ADDRESS *RemoteIp
+ )
+{
+ EFI_STATUS Status;
+ EFI_IP4_CONFIG_PROTOCOL *Ip4Cfg;
+ EFI_IP4_IPCONFIG_DATA *Ip4CfgData;
+ UINTN BufSize;
+ EFI_IP6_MODE_DATA Ip6ModeData;
+ EFI_UDP6_PROTOCOL *Udp6;
+
+ Status = EFI_SUCCESS;
+ Ip4CfgData = NULL;
+ BufSize = 0;
+
+ //
+ // Check whether the input and output udp io are both configured.
+ //
+ if (UdpService->IsConfigured) {
+ goto ON_EXIT;
+ }
+
+ if (UdpService->IpVersion == UDP_IO_UDP4_VERSION) {
+ //
+ // Handle ip4config protocol to get local default address.
+ //
+ Status = gBS->HandleProtocol (
+ UdpService->NicHandle,
+ &gEfiIp4ConfigProtocolGuid,
+ (VOID **) &Ip4Cfg
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto ON_EXIT;
+ }
+
+ Status = Ip4Cfg->GetData (Ip4Cfg, &BufSize, NULL);
+
+ if (EFI_ERROR (Status) && Status != EFI_BUFFER_TOO_SMALL) {
+ goto ON_EXIT;
+ }
+
+ Ip4CfgData = AllocateZeroPool (BufSize);
+
+ if (Ip4CfgData == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ Status = Ip4Cfg->GetData (Ip4Cfg, &BufSize, Ip4CfgData);
+ if (EFI_ERROR (Status)) {
+ goto ON_EXIT;
+ }
+
+ CopyMem (
+ &UdpService->DefaultAddress.v4,
+ &Ip4CfgData->StationAddress,
+ sizeof (EFI_IPv4_ADDRESS)
+ );
+
+ //
+ // Create udp4 io for output with local default address.
+ //
+ UdpService->Output = UdpIoCreateIo (
+ UdpService->NicHandle,
+ UdpService->ImageHandle,
+ IkeConfigUdp4,
+ UDP_IO_UDP4_VERSION,
+ &UdpService->DefaultAddress
+ );
+
+ if (UdpService->Output == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+
+ } else {
+ //
+ // Create udp6 io for output with remote address.
+ //
+ UdpService->Output = UdpIoCreateIo (
+ UdpService->NicHandle,
+ UdpService->ImageHandle,
+ IkeConfigUdp6,
+ UDP_IO_UDP6_VERSION,
+ RemoteIp
+ );
+
+ if (UdpService->Output == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ON_EXIT;
+ }
+ //
+ // Get ip6 mode data to get the result of source address selection.
+ //
+ ZeroMem (&Ip6ModeData, sizeof (EFI_IP6_MODE_DATA));
+
+ Udp6 = UdpService->Output->Protocol.Udp6;
+ Status = Udp6->GetModeData (Udp6, NULL, &Ip6ModeData, NULL, NULL);
+
+ if (EFI_ERROR (Status)) {
+ UdpIoFreeIo (UdpService->Output);
+ goto ON_EXIT;
+ }
+ //
+ // Reconfigure udp6 io without remote address.
+ //
+ Udp6->Configure (Udp6, NULL);
+ Status = IkeConfigUdp6 (UdpService->Output, NULL);
+
+ //
+ // Record the selected source address for ipsec process later.
+ //
+ CopyMem (
+ &UdpService->DefaultAddress.v6,
+ &Ip6ModeData.ConfigData.StationAddress,
+ sizeof (EFI_IPv6_ADDRESS)
+ );
+ }
+
+ UdpService->IsConfigured = TRUE;
+
+ON_EXIT:
+ if (Ip4CfgData != NULL) {
+ FreePool (Ip4CfgData);
+ }
+
+ return Status;
+}
+
+/**
+ Open and configure a UDPIO of Udp4 for IKE packet receiving.
+
+ This function is called at the IPsecDriverBinding start. IPsec create a UDP4 and
+ UDP4 IO for each NIC handle.
+
+ @param[in] Private Point to IPSEC_PRIVATE_DATA
+ @param[in] Controller Handler for NIC card.
+
+ @retval EFI_SUCCESS The Operation is successful.
+ @retval EFI_OUT_OF_RESOURCE The required system resource can't be allocated.
+
+**/
+EFI_STATUS
+IkeOpenInputUdp4 (
+ IN IPSEC_PRIVATE_DATA *Private,
+ IN EFI_HANDLE Controller
+ )
+{
+ IKE_UDP_SERVICE *Udp4Srv;
+
+ //
+ // Check whether udp4 io of the controller has already been opened.
+ //
+ Udp4Srv = IkeLookupUdp (Private, Controller, IP_VERSION_4);
+
+ if (Udp4Srv != NULL) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ Udp4Srv = AllocateZeroPool (sizeof (IKE_UDP_SERVICE));
+
+ if (Udp4Srv == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // Create udp4 io for iutput.
+ //
+ Udp4Srv->Input = UdpIoCreateIo (
+ Controller,
+ Private->ImageHandle,
+ IkeConfigUdp4,
+ UDP_IO_UDP4_VERSION,
+ NULL
+ );
+
+ if (Udp4Srv->Input == NULL) {
+ FreePool (Udp4Srv);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Udp4Srv->NicHandle = Controller;
+ Udp4Srv->ImageHandle = Private->ImageHandle;
+ Udp4Srv->ListHead = &(Private->Udp4List);
+ Udp4Srv->IpVersion = UDP_IO_UDP4_VERSION;
+ Udp4Srv->IsConfigured = FALSE;
+
+ ZeroMem (&Udp4Srv->DefaultAddress, sizeof (EFI_IP_ADDRESS));
+
+ //
+ // Insert the udp4 io into the list and increase the count.
+ //
+ InsertTailList (&Private->Udp4List, &Udp4Srv->List);
+
+ Private->Udp4Num++;
+
+ UdpIoRecvDatagram (Udp4Srv->Input, IkeDispatch, Udp4Srv, 0);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Open and configure a UDPIO of Udp6 for IKE packet receiving.
+
+ This function is called at the IPsecDriverBinding start. IPsec create a UDP6 and UDP6
+ IO for each NIC handle.
+
+ @param[in] Private Point to IPSEC_PRIVATE_DATA
+ @param[in] Controller Handler for NIC card.
+
+ @retval EFI_SUCCESS The Operation is successful.
+ @retval EFI_OUT_OF_RESOURCE The required system resource can't be allocated.
+
+**/
+EFI_STATUS
+IkeOpenInputUdp6 (
+ IN IPSEC_PRIVATE_DATA *Private,
+ IN EFI_HANDLE Controller
+ )
+{
+ IKE_UDP_SERVICE *Udp6Srv;
+
+ Udp6Srv = IkeLookupUdp (Private, Controller, IP_VERSION_6);
+
+ if (Udp6Srv != NULL) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ Udp6Srv = AllocateZeroPool (sizeof (IKE_UDP_SERVICE));
+
+ if (Udp6Srv == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // Create udp6 io for input.
+ //
+ Udp6Srv->Input = UdpIoCreateIo (
+ Controller,
+ Private->ImageHandle,
+ IkeConfigUdp6,
+ UDP_IO_UDP6_VERSION,
+ NULL
+ );
+
+ if (Udp6Srv->Input == NULL) {
+ FreePool (Udp6Srv);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Udp6Srv->NicHandle = Controller;
+ Udp6Srv->ImageHandle = Private->ImageHandle;
+ Udp6Srv->ListHead = &(Private->Udp6List);
+ Udp6Srv->IpVersion = UDP_IO_UDP6_VERSION;
+ Udp6Srv->IsConfigured = FALSE;
+
+ ZeroMem (&Udp6Srv->DefaultAddress, sizeof (EFI_IP_ADDRESS));
+
+ //
+ // Insert the udp6 io into the list and increase the count.
+ //
+ InsertTailList (&Private->Udp6List, &Udp6Srv->List);
+
+ Private->Udp6Num++;
+
+ UdpIoRecvDatagram (Udp6Srv->Input, IkeDispatch, Udp6Srv, 0);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ The general interface of starting IPsec Key Exchange.
+
+ This function is called when a IKE negotiation to start getting a Key.
+
+ @param[in] UdpService Point to IKE_UDP_SERVICE which will be used for
+ IKE packet sending.
+ @param[in] SpdEntry Point to the SPD entry related to the IKE negotiation.
+ @param[in] RemoteIp Point to EFI_IP_ADDRESS related to the IKE negotiation.
+
+ @retval EFI_SUCCESS The Operation is successful.
+ @retval EFI_ACCESS_DENIED No related PAD entry was found.
+ @retval EFI_INVALID_PARAMETER The IKE version is not supported.
+
+**/
+EFI_STATUS
+IkeNegotiate (
+ IN IKE_UDP_SERVICE *UdpService,
+ IN IPSEC_SPD_ENTRY *SpdEntry,
+ IN EFI_IP_ADDRESS *RemoteIp
+ )
+{
+ EFI_STATUS Status;
+ UINT8 *IkeSaSession;
+ IKE_EXCHANGE_INTERFACE *Exchange;
+ IPSEC_PRIVATE_DATA *Private;
+ IPSEC_PAD_ENTRY *PadEntry;
+ UINT8 IkeVersion;
+
+ Private = (UdpService->IpVersion == IP_VERSION_4) ?
+ IPSEC_PRIVATE_DATA_FROM_UDP4LIST(UdpService->ListHead) :
+ IPSEC_PRIVATE_DATA_FROM_UDP6LIST(UdpService->ListHead);
+
+ //
+ // Try to open udp io for output if it hasn't.
+ //
+ Status = IkeOpenOutputUdp (UdpService, RemoteIp);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // Try to find the IKE SA session in the IKEv1 and IKEv2 established SA session list.
+ //
+ IkeSaSession = (UINT8 *) Ikev2SaSessionLookup (&Private->Ikev2EstablishedList, RemoteIp);
+
+
+ if (IkeSaSession == NULL) {
+ //
+ // Find the pad entry by the remote ip address.
+ //
+ PadEntry = IpSecLookupPadEntry (UdpService->IpVersion, RemoteIp);
+ if (PadEntry == NULL) {
+ return EFI_ACCESS_DENIED;
+ }
+ //
+ // Determine the IKE exchange instance by the auth protocol in pad entry.
+ //
+ ASSERT (PadEntry->Data->AuthProtocol < EfiIPsecAuthProtocolMaximum);
+ if (PadEntry->Data->AuthProtocol == EfiIPsecAuthProtocolIKEv1) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Exchange = mIkeExchange[PadEntry->Data->AuthProtocol];
+ //
+ // Start the main mode stage to negotiate IKE SA.
+ //
+ Status = Exchange->NegotiateSa (UdpService, SpdEntry, PadEntry, RemoteIp);
+ } else {
+ //
+ // Determine the IKE exchange instance by the IKE version in IKE SA session.
+ //
+ IkeVersion = IkeGetVersionFromSession (IkeSaSession);
+ if (IkeVersion != 2) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Exchange = mIkeExchange[IkeVersion - 1];
+ //
+ // Start the quick mode stage to negotiate child SA.
+ //
+ Status = Exchange->NegotiateChildSa (IkeSaSession, SpdEntry, NULL);
+ }
+
+ return Status;
+}
+
+/**
+ The generic interface when receive a IKE packet.
+
+ This function is called when UDP IO receives a IKE packet.
+
+ @param[in] Packet Point to received IKE packet.
+ @param[in] EndPoint Point to UDP_END_POINT which contains the information of
+ Remote IP and Port.
+ @param[in] IoStatus The Status of Recieve Token.
+ @param[in] Context Point to data passed from the caller.
+
+**/
+VOID
+IkeDispatch (
+ IN NET_BUF *Packet,
+ IN UDP_END_POINT *EndPoint,
+ IN EFI_STATUS IoStatus,
+ IN VOID *Context
+ )
+{
+ IPSEC_PRIVATE_DATA *Private;
+ IKE_PACKET *IkePacket;
+ IKE_HEADER *IkeHdr;
+ IKE_UDP_SERVICE *UdpService;
+ IKE_EXCHANGE_INTERFACE *Exchange;
+ EFI_STATUS Status;
+
+ UdpService = (IKE_UDP_SERVICE *) Context;
+ IkePacket = NULL;
+ Private = (UdpService->IpVersion == IP_VERSION_4) ?
+ IPSEC_PRIVATE_DATA_FROM_UDP4LIST(UdpService->ListHead) :
+ IPSEC_PRIVATE_DATA_FROM_UDP6LIST(UdpService->ListHead);
+
+ if (EFI_ERROR (IoStatus)) {
+ goto ON_EXIT;
+ }
+ //
+ // Check whether the ipsec is enabled or not.
+ //
+ if (Private->IpSec.DisabledFlag == TRUE) {
+ goto ON_EXIT;
+ }
+
+ if (EndPoint->RemotePort != IKE_DEFAULT_PORT) {
+ goto ON_EXIT;
+ }
+
+ //
+ // Build IKE packet from the received netbuf.
+ //
+ IkePacket = IkePacketFromNetbuf (Packet);
+
+ if (IkePacket == NULL) {
+ goto ON_EXIT;
+ }
+ //
+ // Get the remote address from the IKE packet.
+ //
+ if (UdpService->IpVersion == IP_VERSION_4) {
+ *(UINT32 *) IkePacket->RemotePeerIp.Addr = HTONL ((*(UINT32 *) EndPoint->RemoteAddr.Addr));
+ } else {
+ CopyMem (
+ &IkePacket->RemotePeerIp,
+ NTOHLLL (&EndPoint->RemoteAddr.v6),
+ sizeof (EFI_IPv6_ADDRESS)
+ );
+ }
+ //
+ // Try to open udp io for output if hasn't.
+ //
+ Status = IkeOpenOutputUdp (UdpService, &IkePacket->RemotePeerIp);
+
+ if (EFI_ERROR (Status)) {
+ goto ON_EXIT;
+ }
+
+ IkeHdr = IkePacket->Header;
+
+ //
+ // Determine the IKE exchange instance by the IKE version in IKE header.
+ //
+ if (IKE_MAJOR_VERSION (IkeHdr->Version) == 2) {
+ Exchange = mIkeExchange[IKE_MAJOR_VERSION (IkeHdr->Version) - 1];
+ } else {
+ goto ON_EXIT;
+ }
+
+ switch (IkeHdr->ExchangeType) {
+ case IKE_XCG_TYPE_IDENTITY_PROTECT:
+ case IKE_XCG_TYPE_SA_INIT:
+ case IKE_XCG_TYPE_AUTH:
+ Exchange->HandleSa (UdpService, IkePacket);
+ break;
+
+ case IKE_XCG_TYPE_QM:
+ case IKE_XCG_TYPE_CREATE_CHILD_SA:
+ Exchange->HandleChildSa (UdpService, IkePacket);
+ break;
+
+ case IKE_XCG_TYPE_INFO:
+ case IKE_XCG_TYPE_INFO2:
+ Exchange->HandleInfo (UdpService, IkePacket);
+ break;
+
+ default:
+ break;
+ }
+
+ON_EXIT:
+ if (IkePacket != NULL) {
+ IkePacketFree (IkePacket);
+ }
+
+ if (Packet != NULL) {
+ NetbufFree (Packet);
+ }
+
+ UdpIoRecvDatagram (UdpService->Input, IkeDispatch, UdpService, 0);
+
+ return ;
+}
+
+/**
+ Delete all established IKE SAs and related Child SAs.
+
+ This function is the subfunction of the IpSecCleanupAllSa(). It first calls
+ IkeDeleteChildSa() to delete all Child SAs then send out the related
+ Information packet.
+
+ @param[in] Private Pointer of the IPSEC_PRIVATE_DATA
+
+**/
+VOID
+IkeDeleteAllSas (
+ IN IPSEC_PRIVATE_DATA *Private
+ )
+{
+ LIST_ENTRY *Entry;
+ LIST_ENTRY *NextEntry;
+ IKEV2_SA_SESSION *Ikev2SaSession;
+ UINT8 Value;
+ EFI_STATUS Status;
+ IKE_EXCHANGE_INTERFACE *Exchange;
+ UINT8 IkeVersion;
+
+ Exchange = NULL;
+
+ //
+ // If the IKEv1 is supported, first deal with the Ikev1Estatblished list.
+ //
+
+ //
+ // If IKEv2 SAs are under establishing, delete it directly.
+ //
+ if (!IsListEmpty (&Private->Ikev2SessionList)) {
+ NET_LIST_FOR_EACH_SAFE (Entry, NextEntry, &Private->Ikev2SessionList) {
+ Ikev2SaSession = IKEV2_SA_SESSION_BY_SESSION (Entry);
+ RemoveEntryList (Entry);
+ Ikev2SaSessionFree (Ikev2SaSession);
+ }
+ }
+
+ //
+ // If there is no existing established IKE SA, set the Ipsec DisableFlag to TRUE
+ // and turn off the IsIPsecDisabling flag.
+ //
+ if (IsListEmpty (&Private->Ikev2EstablishedList)) {
+ Value = IPSEC_STATUS_DISABLED;
+ Status = gRT->SetVariable (
+ IPSECCONFIG_STATUS_NAME,
+ &gEfiIpSecConfigProtocolGuid,
+ EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ sizeof (Value),
+ &Value
+ );
+ if (!EFI_ERROR (Status)) {
+ Private->IpSec.DisabledFlag = TRUE;
+ Private->IsIPsecDisabling = FALSE;
+ return ;
+ }
+ }
+
+ //
+ // Delete established IKEv2 SAs.
+ //
+ if (!IsListEmpty (&Private->Ikev2EstablishedList)) {
+ for (Entry = Private->Ikev2EstablishedList.ForwardLink; Entry != &Private->Ikev2EstablishedList;) {
+ Ikev2SaSession = IKEV2_SA_SESSION_BY_SESSION (Entry);
+ Entry = Entry->ForwardLink;
+
+ Ikev2SaSession->SessionCommon.State = IkeStateSaDeleting;
+
+ //
+ // Call for Information Exchange.
+ //
+ IkeVersion = IkeGetVersionFromSession ((UINT8*)Ikev2SaSession);
+ if (IkeVersion == 2) {
+ Exchange = mIkeExchange[IkeVersion - 1];
+ Exchange->NegotiateInfo((UINT8*)Ikev2SaSession, NULL);
+ }
+ }
+ }
+
+}
+
+
+
|