diff options
Diffstat (limited to 'OldMdePkg/Include/Protocol/SerialIo.h')
| -rw-r--r-- | OldMdePkg/Include/Protocol/SerialIo.h | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/OldMdePkg/Include/Protocol/SerialIo.h b/OldMdePkg/Include/Protocol/SerialIo.h new file mode 100644 index 0000000000..89a73409d9 --- /dev/null +++ b/OldMdePkg/Include/Protocol/SerialIo.h @@ -0,0 +1,266 @@ +/** @file
+ Serial IO protocol as defined in the EFI 1.0 specification.
+
+ Abstraction of a basic serial device. Targeted at 16550 UART, but
+ could be much more generic.
+
+ Copyright (c) 2006, Intel Corporation
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ Module Name: SerialIo.h
+
+**/
+
+#ifndef __SERIAL_IO_PROTOCOL_H__
+#define __SERIAL_IO_PROTOCOL_H__
+
+#define EFI_SERIAL_IO_PROTOCOL_GUID \
+ { \
+ 0xBB25CF6F, 0xF1D4, 0x11D2, {0x9A, 0x0C, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0xFD } \
+ }
+
+typedef struct _EFI_SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL;
+
+//
+// Serial IO Data structures
+//
+typedef enum {
+ DefaultParity,
+ NoParity,
+ EvenParity,
+ OddParity,
+ MarkParity,
+ SpaceParity
+} EFI_PARITY_TYPE;
+
+typedef enum {
+ DefaultStopBits,
+ OneStopBit,
+ OneFiveStopBits,
+ TwoStopBits
+} EFI_STOP_BITS_TYPE;
+
+//
+// define for Control bits, grouped by read only, write only, and read write
+//
+//
+// Read Only
+//
+#define EFI_SERIAL_CLEAR_TO_SEND 0x00000010
+#define EFI_SERIAL_DATA_SET_READY 0x00000020
+#define EFI_SERIAL_RING_INDICATE 0x00000040
+#define EFI_SERIAL_CARRIER_DETECT 0x00000080
+#define EFI_SERIAL_INPUT_BUFFER_EMPTY 0x00000100
+#define EFI_SERIAL_OUTPUT_BUFFER_EMPTY 0x00000200
+
+//
+// Write Only
+//
+#define EFI_SERIAL_REQUEST_TO_SEND 0x00000002
+#define EFI_SERIAL_DATA_TERMINAL_READY 0x00000001
+
+//
+// Read Write
+//
+#define EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE 0x00001000
+#define EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE 0x00002000
+#define EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE 0x00004000
+
+//
+// Serial IO Member Functions
+//
+/**
+ Reset the serial device.
+
+ @param This Protocol instance pointer.
+
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The serial device could not be reset.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_RESET) (
+ IN EFI_SERIAL_IO_PROTOCOL *This
+ )
+;
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data buts, and stop bits on a serial device.
+
+ @param This Protocol instance pointer.
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the the
+ device's default interface speed.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's dfault FIFO depth.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+
+ @retval EFI_SUCCESS The device was reset.
+ @retval EFI_DEVICE_ERROR The serial device could not be reset.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_SET_ATTRIBUTES) (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT64 BaudRate,
+ IN UINT32 ReceiveFifoDepth,
+ IN UINT32 Timeout,
+ IN EFI_PARITY_TYPE Parity,
+ IN UINT8 DataBits,
+ IN EFI_STOP_BITS_TYPE StopBits
+ )
+;
+
+/**
+ Set the control bits on a serial device
+
+ @param This Protocol instance pointer.
+ @param Control Set the bits of Control that are settable.
+
+ @retval EFI_SUCCESS The new control bits were set on the serial device.
+ @retval EFI_UNSUPPORTED The serial device does not support this operation.
+ @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_SET_CONTROL_BITS) (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN UINT32 Control
+ )
+;
+
+/**
+ Retrieves the status of thecontrol bits on a serial device
+
+ @param This Protocol instance pointer.
+ @param Control A pointer to return the current Control signals from the serial device.
+
+ @retval EFI_SUCCESS The control bits were read from the serial device.
+ @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_GET_CONTROL_BITS) (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ OUT UINT32 *Control
+ )
+;
+
+/**
+ Writes data to a serial device.
+
+ @param This Protocol instance pointer.
+ @param BufferSize On input, the size of the Buffer. On output, the amount of
+ data actually written.
+ @param Buffer The buffer of data to write
+
+ @retval EFI_SUCCESS The data was written.
+ @retval EFI_DEVICE_ERROR The device reported an error.
+ @retval EFI_TIMEOUT The data write was stopped due to a timeout.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_WRITE) (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ IN VOID *Buffer
+ )
+;
+
+/**
+ Writes data to a serial device.
+
+ @param This Protocol instance pointer.
+ @param BufferSize On input, the size of the Buffer. On output, the amount of
+ data returned in Buffer.
+ @param Buffer The buffer to return the data into.
+
+ @retval EFI_SUCCESS The data was read.
+ @retval EFI_DEVICE_ERROR The device reported an error.
+ @retval EFI_TIMEOUT The data write was stopped due to a timeout.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_SERIAL_READ) (
+ IN EFI_SERIAL_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer
+ )
+;
+
+/**
+ The data values in SERIAL_IO_MODE are read-only and are updated by the code
+ that produces the SERIAL_IO_PROTOCOL member functions.
+
+ ControlMask - A mask fo the Control bits that the device supports. The device
+ must always support the Input Buffer Empty control bit.
+ TimeOut - If applicable, the number of microseconds to wait before timing out
+ a Read or Write operation.
+ BaudRate - If applicable, the current baud rate setting of the device; otherwise,
+ baud rate has the value of zero to indicate that device runs at the
+ device's designed speed.
+ ReceiveFifoDepth - The number of characters the device will buffer on input
+ DataBits - The number of characters the device will buffer on input
+ Parity - If applicable, this is the EFI_PARITY_TYPE that is computed or
+ checked as each character is transmitted or reveived. If the device
+ does not support parity the value is the default parity value.
+ StopBits - If applicable, the EFI_STOP_BITS_TYPE number of stop bits per
+ character. If the device does not support stop bits the value is
+ the default stop bit values.
+
+**/
+typedef struct {
+ UINT32 ControlMask;
+
+ //
+ // current Attributes
+ //
+ UINT32 Timeout;
+ UINT64 BaudRate;
+ UINT32 ReceiveFifoDepth;
+ UINT32 DataBits;
+ UINT32 Parity;
+ UINT32 StopBits;
+} EFI_SERIAL_IO_MODE;
+
+#define SERIAL_IO_INTERFACE_REVISION 0x00010000
+#define EFI_SERIAL_IO_PROTOCOL_REVISION SERIAL_IO_INTERFACE_REVISION
+
+struct _EFI_SERIAL_IO_PROTOCOL {
+ UINT32 Revision;
+ EFI_SERIAL_RESET Reset;
+ EFI_SERIAL_SET_ATTRIBUTES SetAttributes;
+ EFI_SERIAL_SET_CONTROL_BITS SetControl;
+ EFI_SERIAL_GET_CONTROL_BITS GetControl;
+ EFI_SERIAL_WRITE Write;
+ EFI_SERIAL_READ Read;
+
+ EFI_SERIAL_IO_MODE *Mode;
+};
+
+extern EFI_GUID gEfiSerialIoProtocolGuid;
+
+#endif
|