diff options
Diffstat (limited to 'OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772.h')
-rw-r--r-- | OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772.h | 1032 |
1 files changed, 0 insertions, 1032 deletions
diff --git a/OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772.h b/OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772.h deleted file mode 100644 index 92ac64d1b3..0000000000 --- a/OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772b/Ax88772.h +++ /dev/null @@ -1,1032 +0,0 @@ -/** @file
- Definitions for ASIX AX88772 Ethernet adapter.
-
- Copyright (c) 2011 - 2015, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _AX88772_H_
-#define _AX88772_H_
-
-#include <Uefi.h>
-
-#include <Guid/EventGroup.h>
-
-#include <IndustryStandard/Pci.h>
-
-#include <Library/BaseMemoryLib.h>
-#include <Library/DebugLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiDriverEntryPoint.h>
-#include <Library/UefiLib.h>
-#include <Library/UefiRuntimeLib.h>
-
-#include <Protocol/DevicePath.h>
-#include <Protocol/LoadedImage.h>
-#include <Protocol/NetworkInterfaceIdentifier.h>
-#include <Protocol/SimpleNetwork.h>
-#include <Protocol/UsbIo.h>
-
-#define MAX_QUEUE_SIZE 50
-#define MAX_BULKIN_SIZE 16384
-#define HW_HDR_LENGTH 8
-
-
-#define MAX_LINKIDLE_THRESHOLD 20000
-
-
-
-//------------------------------------------------------------------------------
-// Macros
-//------------------------------------------------------------------------------
-
-#if defined(_MSC_VER) /* Handle Microsoft VC++ compiler specifics. */
-#define DBG_ENTER() DEBUG (( 0xffffffff, "Entering " __FUNCTION__ "\n" )) ///< Display routine entry
-#define DBG_EXIT() DEBUG (( 0xffffffff, "Exiting " __FUNCTION__ "\n" )) ///< Display routine exit
-#define DBG_EXIT_DEC(Status) DEBUG (( 0xffffffff, "Exiting " __FUNCTION__ ", Status: %d\n", Status )) ///< Display routine exit with decimal value
-#define DBG_EXIT_HEX(Status) DEBUG (( 0xffffffff, "Exiting " __FUNCTION__ ", Status: 0x%08x\n", Status )) ///< Display routine exit with hex value
-#define DBG_EXIT_STATUS(Status) DEBUG (( 0xffffffff, "Exiting " __FUNCTION__ ", Status: %r\n", Status )) ///< Display routine exit with status value
-#define DBG_EXIT_TF(Status) DEBUG (( 0xffffffff, "Exiting " __FUNCTION__ ", returning %s\n", (FALSE == Status) ? L"FALSE" : L"TRUE" )) ///< Display routine with TRUE/FALSE value
-#else // _MSC_VER
-#define DBG_ENTER() ///< Display routine entry
-#define DBG_EXIT() ///< Display routine exit
-#define DBG_EXIT_DEC(Status) ///< Display routine exit with decimal value
-#define DBG_EXIT_HEX(Status) ///< Display routine exit with hex value
-#define DBG_EXIT_STATUS(Status) ///< Display routine exit with status value
-#define DBG_EXIT_TF(Status) ///< Display routine with TRUE/FALSE value
-#endif // _MSC_VER
-
-#define USB_IS_IN_ENDPOINT(EndPointAddr) (((EndPointAddr) & BIT7) != 0) ///< Return TRUE/FALSE for IN direction
-#define USB_IS_OUT_ENDPOINT(EndPointAddr) (((EndPointAddr) & BIT7) == 0) ///< Return TRUE/FALSE for OUT direction
-#define USB_IS_BULK_ENDPOINT(Attribute) (((Attribute) & (BIT0 | BIT1)) == USB_ENDPOINT_BULK) ///< Return TRUE/FALSE for BULK type
-#define USB_IS_INTERRUPT_ENDPOINT(Attribute) (((Attribute) & (BIT0 | BIT1)) == USB_ENDPOINT_INTERRUPT) ///< Return TRUE/FALSE for INTERRUPT type
-
-
-#define PRINT(_L_STR) (gST->ConOut->OutputString(gST->ConOut,(_L_STR)))
-//------------------------------------------------------------------------------
-// Constants
-//------------------------------------------------------------------------------
-
-#define DEBUG_RX_BROADCAST 0x40000000 ///< Display RX broadcast messages
-#define DEBUG_RX_MULTICAST 0x20000000 ///< Display RX multicast messages
-#define DEBUG_RX_UNICAST 0x10000000 ///< Display RX unicast messages
-#define DEBUG_MAC_ADDRESS 0x08000000 ///< Display the MAC address
-#define DEBUG_LINK 0x04000000 ///< Display the link status
-#define DEBUG_TX 0x02000000 ///< Display the TX messages
-#define DEBUG_PHY 0x01000000 ///< Display the PHY register values
-#define DEBUG_SROM 0x00800000 ///< Display the SROM contents
-#define DEBUG_TIMER 0x00400000 ///< Display the timer routine entry/exit
-#define DEBUG_TPL 0x00200000 ///< Display the timer routine entry/exit
-
-#define AX88772_MAX_PKT_SIZE 2048 ///< Maximum packet size
-
-#define ETHERNET_HEADER_SIZE sizeof ( ETHERNET_HEADER ) ///< Size in bytes of the Ethernet header
-#define MIN_ETHERNET_PKT_SIZE 60 ///< Minimum packet size including Ethernet header
-#define MAX_ETHERNET_PKT_SIZE 1500 ///< Ethernet spec 3.1.1: Minimum packet size
-
-#define USB_NETWORK_CLASS 0x09 ///< USB Network class code
-#define USB_BUS_TIMEOUT 1000 ///< USB timeout in milliseconds
-
-#define TIMER_MSEC 20 ///< Polling interval for the NIC
-//#define TPL_AX88772 TPL_CALLBACK ///< TPL for routine synchronization
-
-#define HC_DEBUG 0
-#define BULKIN_TIMEOUT 20
-#define AUTONEG_DELAY 500000
-#define AUTONEG_POLLCNT 20
-
-/**
- Verify new TPL value
-
- This macro which is enabled when debug is enabled verifies that
- the new TPL value is >= the current TPL value.
-**/
-#ifdef VERIFY_TPL
-#undef VERIFY_TPL
-#endif // VERIFY_TPL
-
-#if !defined(MDEPKG_NDEBUG)
-
-#define VERIFY_TPL(tpl) \
-{ \
- EFI_TPL PreviousTpl; \
- \
- PreviousTpl = gBS->RaiseTPL ( TPL_HIGH_LEVEL ); \
- gBS->RestoreTPL ( PreviousTpl ); \
- if ( PreviousTpl > tpl ) { \
- DEBUG (( DEBUG_ERROR, "Current TPL: %d, New TPL: %d\r\n", PreviousTpl, tpl )); \
- ASSERT ( PreviousTpl <= tpl ); \
- } \
-}
-
-#else // MDEPKG_NDEBUG
-
-#define VERIFY_TPL(tpl)
-
-#endif // MDEPKG_NDEBUG
-
-//------------------------------------------------------------------------------
-// Hardware Definition
-//------------------------------------------------------------------------------
-
-#define FreeQueueSize 10
-
-#define DEV_SIGNATURE SIGNATURE_32 ('A','X','8','8') ///< Signature of data structures in memory
-
-#define RESET_MSEC 1000 ///< Reset duration
-#define PHY_RESET_MSEC 500 ///< PHY reset duration
-
-//
-// RX Control register
-//
-
-#define RXC_PRO 0x0001 ///< Receive all packets
-#define RXC_AMALL 0x0002 ///< Receive all multicast packets
-#define RXC_SEP 0x0004 ///< Save error packets
-#define RXC_AB 0x0008 ///< Receive broadcast packets
-#define RXC_AM 0x0010 ///< Use multicast destination address hash table
-#define RXC_AP 0x0020 ///< Accept physical address from Multicast Filter
-#define RXC_SO 0x0080 ///< Start operation
-#define RXC_MFB 0x0300 ///< Maximum frame burst
-#define RXC_MFB_2048 0 ///< Maximum frame size: 2048 bytes
-#define RXC_MFB_4096 0x0100 ///< Maximum frame size: 4096 bytes
-#define RXC_MFB_8192 0x0200 ///< Maximum frame size: 8192 bytes
-#define RXC_MFB_16384 0x0300 ///< Maximum frame size: 16384 bytes
-
-/*Freddy*/
-#define RXC_RH1M 0x0100 ///< Rx header 1
-#define RXC_RH2M 0x0200 ///< Rx header 2
-#define RXC_RH3M 0x0400 ///< Rx header 3
-/*Freddy*/
-
-//
-// Medium Status register
-//
-
-#define MS_FD 0x0002 ///< Full duplex
-#define MS_ONE 0x0004 ///< Must be one
-#define MS_RFC 0x0010 ///< RX flow control enable
-#define MS_TFC 0x0020 ///< TX flow control enable
-#define MS_PF 0x0080 ///< Pause frame enable
-#define MS_RE 0x0100 ///< Receive enable
-#define MS_PS 0x0200 ///< Port speed 1=100, 0=10 Mbps
-#define MS_SBP 0x0800 ///< Stop back pressure
-#define MS_SM 0x1000 ///< Super MAC support
-
-//
-// Software PHY Select register
-//
-
-#define SPHY_PSEL (1 << 0) ///< Select internal PHY
-#define SPHY_SSMII (1 << 2)
-#define SPHY_SSEN (1 << 4)
-#define SPHY_ASEL 0x02 ///< 1=Auto select, 0=Manual select
-
-//
-// Software Reset register
-//
-
-#define SRR_RR 0x01 ///< Clear receive frame length error
-#define SRR_RT 0x02 ///< Clear transmit frame length error
-#define SRR_BZTYPE 0x04 ///< External PHY reset pin tri-state enable
-#define SRR_PRL 0x08 ///< External PHY reset pin level
-#define SRR_BZ 0x10 ///< Force Bulk to return zero length packet
-#define SRR_IPRL 0x20 ///< Internal PHY reset control
-#define SRR_IPPD 0x40 ///< Internal PHY power down
-
-//
-// PHY ID values
-//
-
-#define PHY_ID_INTERNAL 0x0010 ///< Internal PHY
-
-//
-// USB Commands
-//
-
-#define CMD_PHY_ACCESS_SOFTWARE 0x06 ///< Software in control of PHY
-#define CMD_PHY_REG_READ 0x07 ///< Read PHY register, Value: PHY, Index: Register, Data: Register value
-#define CMD_PHY_REG_WRITE 0x08 ///< Write PHY register, Value: PHY, Index: Register, Data: New 16-bit value
-#define CMD_PHY_ACCESS_HARDWARE 0x0a ///< Hardware in control of PHY
-#define CMD_SROM_READ 0x0b ///< Read SROM register: Value: Address, Data: Value
-#define CMD_RX_CONTROL_WRITE 0x10 ///< Set the RX control register, Value: New value
-#define CMD_GAPS_WRITE 0x12 ///< Write the gaps register, Value: New value
-#define CMD_MAC_ADDRESS_READ 0x13 ///< Read the MAC address, Data: 6 byte MAC address
-#define CMD_MAC_ADDRESS_WRITE 0x14 ///< Set the MAC address, Data: New 6 byte MAC address
-#define CMD_MULTICAST_HASH_WRITE 0x16 ///< Write the multicast hash table, Data: New 8 byte value
-#define CMD_MULTICAST_HASH_READ 0x16 ///< Read the multicast hash table
-#define CMD_MEDIUM_STATUS_READ 0x1a ///< Read medium status register, Data: Register value
-#define CMD_MEDIUM_STATUS_WRITE 0x1b ///< Write medium status register, Value: New value
-#define CMD_WRITE_GPIOS 0x1f
-#define CMD_RESET 0x20 ///< Reset register, Value: New value
-#define CMD_PHY_SELECT 0x22 ///< PHY select register, Value: New value
-
-/*Freddy*/
-#define CMD_RXQTC 0x2a ///< RX Queue Cascade Threshold Control Register
-/*Freddy*/
-
-//------------------------------
-// USB Endpoints
-//------------------------------
-
-#define CONTROL_ENDPOINT 0 ///< Control endpoint
-#define INTERRUPT_ENDPOINT 1 ///< Interrupt endpoint
-#define BULK_IN_ENDPOINT 2 ///< Receive endpoint
-#define BULK_OUT_ENDPOINT 3 ///< Transmit endpoint
-
-//------------------------------
-// PHY Registers
-//------------------------------
-
-#define PHY_BMCR 0 ///< Control register
-#define PHY_BMSR 1 ///< Status register
-#define PHY_ANAR 4 ///< Autonegotiation advertisement register
-#define PHY_ANLPAR 5 ///< Autonegotiation link parter ability register
-#define PHY_ANER 6 ///< Autonegotiation expansion register
-
-// BMCR - Register 0
-
-#define BMCR_RESET 0x8000 ///< 1 = Reset the PHY, bit clears after reset
-#define BMCR_LOOPBACK 0x4000 ///< 1 = Loopback enabled
-#define BMCR_100MBPS 0x2000 ///< 100 Mbits/Sec
-#define BMCR_10MBPS 0 ///< 10 Mbits/Sec
-#define BMCR_AUTONEGOTIATION_ENABLE 0x1000 ///< 1 = Enable autonegotiation
-#define BMCR_POWER_DOWN 0x0800 ///< 1 = Power down
-#define BMCR_ISOLATE 0x0400 ///< 0 = Isolate PHY
-#define BMCR_RESTART_AUTONEGOTIATION 0x0200 ///< 1 = Restart autonegotiation
-#define BMCR_FULL_DUPLEX 0x0100 ///< Full duplex operation
-#define BMCR_HALF_DUPLEX 0 ///< Half duplex operation
-#define BMCR_COLLISION_TEST 0x0080 ///< 1 = Collision test enabled
-
-// BSMR - Register 1
-
-#define BMSR_100BASET4 0x8000 ///< 1 = 100BASE-T4 mode
-#define BMSR_100BASETX_FDX 0x4000 ///< 1 = 100BASE-TX full duplex
-#define BMSR_100BASETX_HDX 0x2000 ///< 1 = 100BASE-TX half duplex
-#define BMSR_10BASET_FDX 0x1000 ///< 1 = 10BASE-T full duplex
-#define BMSR_10BASET_HDX 0x0800 ///< 1 = 10BASE-T half duplex
-#define BMSR_MF 0x0040 ///< 1 = PHY accepts frames with preamble suppressed
-#define BMSR_AUTONEG_CMPLT 0x0020 ///< 1 = Autonegotiation complete
-#define BMSR_RF 0x0010 ///< 1 = Remote fault
-#define BMSR_AUTONEG 0x0008 ///< 1 = Able to perform autonegotiation
-#define BMSR_LINKST 0x0004 ///< 1 = Link up
-#define BMSR_JABBER_DETECT 0x0002 ///< 1 = jabber condition detected
-#define BMSR_EXTENDED_CAPABILITY 0x0001 ///< 1 = Extended register capable
-
-// ANAR and ANLPAR Registers 4, 5
-
-#define AN_NP 0x8000 ///< 1 = Next page available
-#define AN_ACK 0x4000 ///< 1 = Link partner acknowledged
-#define AN_RF 0x2000 ///< 1 = Remote fault indicated by link partner
-#define AN_FCS 0x0400 ///< 1 = Flow control ability
-#define AN_T4 0x0200 ///< 1 = 100BASE-T4 support
-#define AN_TX_FDX 0x0100 ///< 1 = 100BASE-TX Full duplex
-#define AN_TX_HDX 0x0080 ///< 1 = 100BASE-TX support
-#define AN_10_FDX 0x0040 ///< 1 = 10BASE-T Full duplex
-#define AN_10_HDX 0x0020 ///< 1 = 10BASE-T support
-#define AN_CSMA_CD 0x0001 ///< 1 = IEEE 802.3 CSMA/CD support
-
-// asix_flags defines
-#define FLAG_NONE 0
-#define FLAG_TYPE_AX88172 BIT0
-#define FLAG_TYPE_AX88772 BIT1
-#define FLAG_TYPE_AX88772B BIT2
-#define FLAG_EEPROM_MAC BIT3 // initial mac address in eeprom
-
-//------------------------------------------------------------------------------
-// Data Types
-//------------------------------------------------------------------------------
-
-typedef struct {
- UINT16 VendorId;
- UINT16 ProductId;
- INT32 Flags;
-}ASIX_DONGLE;
-
-/**
- Ethernet header layout
-
- IEEE 802.3-2002 Part 3 specification, section 3.1.1.
-**/
-#pragma pack(1)
-typedef struct {
- UINT8 dest_addr[PXE_HWADDR_LEN_ETHER]; ///< Destination LAN address
- UINT8 src_addr[PXE_HWADDR_LEN_ETHER]; ///< Source LAN address
- UINT16 type; ///< Protocol or length
-} ETHERNET_HEADER;
-#pragma pack()
-
-/**
- Receive and Transmit packet structure
-**/
-#pragma pack(1)
-typedef struct _RX_TX_PACKET {
- struct _RX_TX_PACKET * pNext; ///< Next receive packet
- UINT16 Length; ///< Packet length
- UINT16 LengthBar; ///< Complement of the length
- UINT8 Data[ AX88772_MAX_PKT_SIZE ]; ///< Received packet data
-} RX_TX_PACKET;
-#pragma pack()
-
-
-#pragma pack(1)
-typedef struct _RX_PKT {
- struct _RX_PKT *pNext;
- BOOLEAN f_Used;
- UINT16 Length;
- UINT8 Data [AX88772_MAX_PKT_SIZE] ;
-} RX_PKT;
-#pragma pack()
-
-/**
- AX88772 control structure
-
- The driver uses this structure to manage the Asix AX88772 10/100
- Ethernet controller.
-**/
-typedef struct {
- UINTN Signature; ///< Structure identification
-
- //
- // USB data
- //
- EFI_HANDLE Controller; ///< Controller handle
- EFI_USB_IO_PROTOCOL * pUsbIo; ///< USB driver interface
-
- //
- // Simple network protocol data
- //
- EFI_SIMPLE_NETWORK_PROTOCOL SimpleNetwork; ///< Driver's network stack interface
- EFI_SIMPLE_NETWORK_PROTOCOL SimpleNetwork_Backup;
- EFI_SIMPLE_NETWORK_MODE SimpleNetworkData; ///< Data for simple network
-
- //
- // Ethernet controller data
- //
- BOOLEAN bInitialized; ///< Controller initialized
- VOID * pTxBuffer; ///< Last transmit buffer
- UINT16 PhyId; ///< PHY ID
-
- //
- // Link state
- //
- BOOLEAN b100Mbps; ///< Current link speed, FALSE = 10 Mbps
- BOOLEAN bComplete; ///< Current state of auto-negotiation
- BOOLEAN bFullDuplex; ///< Current duplex
- BOOLEAN bLinkUp; ///< Current link state
- UINTN LinkIdleCnt;
- UINTN PollCount; ///< Number of times the autonegotiation status was polled
- UINT16 CurRxControl;
- //
- // Receive buffer list
- //
- RX_TX_PACKET * pRxTest;
- RX_TX_PACKET * pTxTest;
-
- INT8 MulticastHash[8];
- EFI_MAC_ADDRESS MAC;
- BOOLEAN bHavePkt;
-
- EFI_DEVICE_PATH_PROTOCOL *MyDevPath;
-
- EFI_DRIVER_BINDING_PROTOCOL * DrvBind;
-
- RX_PKT * QueueHead;
- RX_PKT * pNextFill;
- RX_PKT * pFirstFill;
- UINTN PktCntInQueue;
- UINT8 * pBulkInBuff;
-
- INT32 Flags;
-
-} NIC_DEVICE;
-
-#define DEV_FROM_SIMPLE_NETWORK(a) CR (a, NIC_DEVICE, SimpleNetwork, DEV_SIGNATURE) ///< Locate NIC_DEVICE from Simple Network Protocol
-
-//------------------------------------------------------------------------------
-// Simple Network Protocol
-//------------------------------------------------------------------------------
-
-/**
- Reset the network adapter.
-
- Resets a network adapter and reinitializes it with the parameters that
- were provided in the previous call to Initialize (). The transmit and
- receive queues are cleared. Receive filters, the station address, the
- statistics, and the multicast-IP-to-HW MAC addresses are not reset by
- this call.
-
- This routine calls ::Ax88772Reset to perform the adapter specific
- reset operation. This routine also starts the link negotiation
- by calling ::Ax88772NegotiateLinkStart.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] bExtendedVerification Indicates that the driver may perform a more
- exhaustive verification operation of the device
- during reset.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Reset (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN bExtendedVerification
- );
-
-/**
- Initialize the simple network protocol.
-
- This routine calls ::Ax88772MacAddressGet to obtain the
- MAC address.
-
- @param [in] pNicDevice NIC_DEVICE_INSTANCE pointer
-
- @retval EFI_SUCCESS Setup was successful
-
-**/
-EFI_STATUS
-SN_Setup (
- IN NIC_DEVICE * pNicDevice
- );
-
-/**
- This routine starts the network interface.
-
- @param [in] pSimpleNetwork Protocol instance pointer
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_ALREADY_STARTED The network interface was already started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Start (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork
- );
-
-/**
- Set the MAC address.
-
- This function modifies or resets the current station address of a
- network interface. If Reset is TRUE, then the current station address
- is set ot the network interface's permanent address. If Reset if FALSE
- then the current station address is changed to the address specified by
- pNew.
-
- This routine calls ::Ax88772MacAddressSet to update the MAC address
- in the network adapter.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] bReset Flag used to reset the station address to the
- network interface's permanent address.
- @param [in] pNew New station address to be used for the network
- interface.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_StationAddress (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN bReset,
- IN EFI_MAC_ADDRESS * pNew
- );
-
-/**
- This function resets or collects the statistics on a network interface.
- If the size of the statistics table specified by StatisticsSize is not
- big enough for all of the statistics that are collected by the network
- interface, then a partial buffer of statistics is returned in
- StatisticsTable.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] bReset Set to TRUE to reset the statistics for the network interface.
- @param [in, out] pStatisticsSize On input the size, in bytes, of StatisticsTable. On output
- the size, in bytes, of the resulting table of statistics.
- @param [out] pStatisticsTable A pointer to the EFI_NETWORK_STATISTICS structure that
- conains the statistics.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_BUFFER_TOO_SMALL The pStatisticsTable is NULL or the buffer is too small.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Statistics (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN BOOLEAN bReset,
- IN OUT UINTN * pStatisticsSize,
- OUT EFI_NETWORK_STATISTICS * pStatisticsTable
- );
-
-/**
- This function stops a network interface. This call is only valid
- if the network interface is in the started state.
-
- @param [in] pSimpleNetwork Protocol instance pointer
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Stop (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork
- );
-
-/**
- This function releases the memory buffers assigned in the Initialize() call.
- Pending transmits and receives are lost, and interrupts are cleared and disabled.
- After this call, only Initialize() and Stop() calls may be used.
-
- @param [in] pSimpleNetwork Protocol instance pointer
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
- @retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Shutdown (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork
- );
-
-/**
- Send a packet over the network.
-
- This function places the packet specified by Header and Buffer on
- the transmit queue. This function performs a non-blocking transmit
- operation. When the transmit is complete, the buffer is returned
- via the GetStatus() call.
-
- This routine calls ::Ax88772Rx to empty the network adapter of
- receive packets. The routine then passes the transmit packet
- to the network adapter.
-
- @param [in] pSimpleNetwork Protocol instance pointer
- @param [in] HeaderSize The size, in bytes, of the media header to be filled in by
- the Transmit() function. If HeaderSize is non-zero, then
- it must be equal to SimpleNetwork->Mode->MediaHeaderSize
- and DestAddr and Protocol parameters must not be NULL.
- @param [in] BufferSize The size, in bytes, of the entire packet (media header and
- data) to be transmitted through the network interface.
- @param [in] pBuffer A pointer to the packet (media header followed by data) to
- to be transmitted. This parameter can not be NULL. If
- HeaderSize is zero, then the media header is Buffer must
- already be filled in by the caller. If HeaderSize is nonzero,
- then the media header will be filled in by the Transmit()
- function.
- @param [in] pSrcAddr The source HW MAC address. If HeaderSize is zero, then
- this parameter is ignored. If HeaderSize is nonzero and
- SrcAddr is NULL, then SimpleNetwork->Mode->CurrentAddress
- is used for the source HW MAC address.
- @param [in] pDestAddr The destination HW MAC address. If HeaderSize is zero, then
- this parameter is ignored.
- @param [in] pProtocol The type of header to build. If HeaderSize is zero, then
- this parameter is ignored.
-
- @retval EFI_SUCCESS This operation was successful.
- @retval EFI_NOT_STARTED The network interface was not started.
- @retval EFI_NOT_READY The network interface is too busy to accept this transmit request.
- @retval EFI_BUFFER_TOO_SMALL The BufferSize parameter is too small.
- @retval EFI_INVALID_PARAMETER pSimpleNetwork parameter was NULL or did not point to a valid
- EFI_SIMPLE_NETWORK_PROTOCOL structure.
- @retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
-
-**/
-EFI_STATUS
-EFIAPI
-SN_Transmit (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN UINTN HeaderSize,
- IN UINTN BufferSize,
- IN VOID * pBuffer,
- IN EFI_MAC_ADDRESS * pSrcAddr,
- IN EFI_MAC_ADDRESS * pDestAddr,
- IN UINT16 * pProtocol
- );
-
-//------------------------------------------------------------------------------
-// Support Routines
-//------------------------------------------------------------------------------
-
-/**
- Get the MAC address
-
- This routine calls ::Ax88772UsbCommand to request the MAC
- address from the network adapter.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [out] pMacAddress Address of a six byte buffer to receive the MAC address.
-
- @retval EFI_SUCCESS The MAC address is available.
- @retval other The MAC address is not valid.
-
-**/
-EFI_STATUS
-Ax88772MacAddressGet (
- IN NIC_DEVICE * pNicDevice,
- OUT UINT8 * pMacAddress
- );
-
-/**
- Set the MAC address
-
- This routine calls ::Ax88772UsbCommand to set the MAC address
- in the network adapter.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] pMacAddress Address of a six byte buffer to containing the new MAC address.
-
- @retval EFI_SUCCESS The MAC address was set.
- @retval other The MAC address was not set.
-
-**/
-EFI_STATUS
-Ax88772MacAddressSet (
- IN NIC_DEVICE * pNicDevice,
- IN UINT8 * pMacAddress
- );
-
-/**
- Clear the multicast hash table
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
-
-**/
-VOID
-Ax88772MulticastClear (
- IN NIC_DEVICE * pNicDevice
- );
-
-/**
- Enable a multicast address in the multicast hash table
-
- This routine calls ::Ax88772Crc to compute the hash bit for
- this MAC address.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] pMacAddress Address of a six byte buffer to containing the MAC address.
-
-**/
-VOID
-Ax88772MulticastSet (
- IN NIC_DEVICE * pNicDevice,
- IN UINT8 * pMacAddress
- );
-
-/**
- Start the link negotiation
-
- This routine calls ::Ax88772PhyWrite to start the PHY's link
- negotiation.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
-
- @retval EFI_SUCCESS The link negotiation was started.
- @retval other Failed to start the link negotiation.
-
-**/
-EFI_STATUS
-Ax88772NegotiateLinkStart (
- IN NIC_DEVICE * pNicDevice
- );
-
-/**
- Complete the negotiation of the PHY link
-
- This routine calls ::Ax88772PhyRead to determine if the
- link negotiation is complete.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in, out] pPollCount Address of number of times this routine was polled
- @param [out] pbComplete Address of boolean to receive complate status.
- @param [out] pbLinkUp Address of boolean to receive link status, TRUE=up.
- @param [out] pbHiSpeed Address of boolean to receive link speed, TRUE=100Mbps.
- @param [out] pbFullDuplex Address of boolean to receive link duplex, TRUE=full.
-
- @retval EFI_SUCCESS The MAC address is available.
- @retval other The MAC address is not valid.
-
-**/
-EFI_STATUS
-Ax88772NegotiateLinkComplete (
- IN NIC_DEVICE * pNicDevice,
- IN OUT UINTN * pPollCount,
- OUT BOOLEAN * pbComplete,
- OUT BOOLEAN * pbLinkUp,
- OUT BOOLEAN * pbHiSpeed,
- OUT BOOLEAN * pbFullDuplex
- );
-
-/**
- Read a register from the PHY
-
- This routine calls ::Ax88772UsbCommand to read a PHY register.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] RegisterAddress Number of the register to read.
- @param [in, out] pPhyData Address of a buffer to receive the PHY register value
-
- @retval EFI_SUCCESS The PHY data is available.
- @retval other The PHY data is not valid.
-
-**/
-EFI_STATUS
-Ax88772PhyRead (
- IN NIC_DEVICE * pNicDevice,
- IN UINT8 RegisterAddress,
- IN OUT UINT16 * pPhyData
- );
-
-/**
- Write to a PHY register
-
- This routine calls ::Ax88772UsbCommand to write a PHY register.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] RegisterAddress Number of the register to read.
- @param [in] PhyData Address of a buffer to receive the PHY register value
-
- @retval EFI_SUCCESS The PHY data was written.
- @retval other Failed to wwrite the PHY register.
-
-**/
-EFI_STATUS
-Ax88772PhyWrite (
- IN NIC_DEVICE * pNicDevice,
- IN UINT8 RegisterAddress,
- IN UINT16 PhyData
- );
-
-/**
- Reset the AX88772
-
- This routine uses ::Ax88772UsbCommand to reset the network
- adapter. This routine also uses ::Ax88772PhyWrite to reset
- the PHY.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
-
- @retval EFI_SUCCESS The MAC address is available.
- @retval other The MAC address is not valid.
-
-**/
-EFI_STATUS
-Ax88772Reset (
- IN NIC_DEVICE * pNicDevice
- );
-
-VOID
-Ax88772ChkLink (
- IN NIC_DEVICE * pNicDevice,
- IN BOOLEAN bUpdateLink
- );
-
-/**
- Receive a frame from the network.
-
- This routine polls the USB receive interface for a packet. If a packet
- is available, this routine adds the receive packet to the list of
- pending receive packets.
-
- This routine calls ::Ax88772NegotiateLinkComplete to verify
- that the link is up. This routine also calls ::SN_Reset to
- reset the network adapter when necessary. Finally this
- routine attempts to receive one or more packets from the
- network adapter.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] bUpdateLink TRUE = Update link status
-
-**/
-VOID
-Ax88772Rx (
- IN NIC_DEVICE * pNicDevice,
- IN BOOLEAN bUpdateLink
- );
-
-/**
- Enable or disable the receiver
-
- This routine calls ::Ax88772UsbCommand to update the
- receiver state. This routine also calls ::Ax88772MacAddressSet
- to establish the MAC address for the network adapter.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] RxFilter Simple network RX filter mask value
-
- @retval EFI_SUCCESS The MAC address was set.
- @retval other The MAC address was not set.
-
-**/
-EFI_STATUS
-Ax88772RxControl (
- IN NIC_DEVICE * pNicDevice,
- IN UINT32 RxFilter
- );
-
-/**
- Read an SROM location
-
- This routine calls ::Ax88772UsbCommand to read data from the
- SROM.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] Address SROM address
- @param [out] pData Buffer to receive the data
-
- @retval EFI_SUCCESS The read was successful
- @retval other The read failed
-
-**/
-EFI_STATUS
-Ax88772SromRead (
- IN NIC_DEVICE * pNicDevice,
- IN UINT32 Address,
- OUT UINT16 * pData
- );
-
-/**
- Send a command to the USB device.
-
- @param [in] pNicDevice Pointer to the NIC_DEVICE structure
- @param [in] pRequest Pointer to the request structure
- @param [in, out] pBuffer Data buffer address
-
- @retval EFI_SUCCESS The USB transfer was successful
- @retval other The USB transfer failed
-
-**/
-EFI_STATUS
-Ax88772UsbCommand (
- IN NIC_DEVICE * pNicDevice,
- IN USB_DEVICE_REQUEST * pRequest,
- IN OUT VOID * pBuffer
- );
-
-//------------------------------------------------------------------------------
-// EFI Component Name Protocol Support
-//------------------------------------------------------------------------------
-
-extern EFI_COMPONENT_NAME_PROTOCOL gComponentName; ///< Component name protocol declaration
-extern EFI_COMPONENT_NAME2_PROTOCOL gComponentName2; ///< Component name 2 protocol declaration
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param [in] pThis A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
- @param [in] pLanguage A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 3066 or ISO 639-2 language code format.
- @param [out] ppDriverName A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-GetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL * pThis,
- IN CHAR8 * pLanguage,
- OUT CHAR16 ** ppDriverName
- );
-
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param [in] pThis A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
- @param [in] ControllerHandle The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
- @param [in] ChildHandle The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
- @param [in] pLanguage A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 3066 or ISO 639-2 language code format.
- @param [out] ppControllerName A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
- @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-GetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL * pThis,
- IN EFI_HANDLE ControllerHandle,
- IN OPTIONAL EFI_HANDLE ChildHandle,
- IN CHAR8 * pLanguage,
- OUT CHAR16 ** ppControllerName
- );
-
-VOID
-FillPkt2Queue (
- IN EFI_SIMPLE_NETWORK_PROTOCOL * pSimpleNetwork,
- IN UINTN BufLength);
-
-//------------------------------------------------------------------------------
-
-#endif // _AX88772_H_
|