diff options
Diffstat (limited to 'OvmfPkg')
| -rw-r--r-- | OvmfPkg/Include/Library/QemuFwCfgS3Lib.h | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/OvmfPkg/Include/Library/QemuFwCfgS3Lib.h b/OvmfPkg/Include/Library/QemuFwCfgS3Lib.h index 1c473610d1..76c8554cb7 100644 --- a/OvmfPkg/Include/Library/QemuFwCfgS3Lib.h +++ b/OvmfPkg/Include/Library/QemuFwCfgS3Lib.h @@ -19,6 +19,8 @@ #ifndef __FW_CFG_S3_LIB__
#define __FW_CFG_S3_LIB__
+#include <Base.h>
+
/**
Determine if S3 support is explicitly enabled.
@@ -36,4 +38,324 @@ QemuFwCfgS3Enabled ( VOID
);
+
+/**
+ Prototype for the callback function that the client module provides.
+
+ In the callback function, the client module calls the
+ QemuFwCfgS3ScriptWriteBytes(), QemuFwCfgS3ScriptReadBytes(),
+ QemuFwCfgS3ScriptSkipBytes(), and QemuFwCfgS3ScriptCheckValue() functions.
+ Those functions produce ACPI S3 Boot Script opcodes that will perform fw_cfg
+ DMA operations, and will check any desired values that were read, during S3
+ resume.
+
+ The callback function is invoked when the production of ACPI S3 Boot Script
+ opcodes becomes possible. This may occur directly on the call stack of
+ QemuFwCfgS3CallWhenBootScriptReady() (see below), or after
+ QemuFwCfgS3CallWhenBootScriptReady() has successfully returned.
+
+ The callback function must not return if it fails -- in the general case,
+ there is noone to propagate any errors to. Therefore, on error, an error
+ message should be logged, and CpuDeadLoop() must be called.
+
+ @param[in,out] Context Carries information from the client module
+ itself (i.e., from the invocation of
+ QemuFwCfgS3CallWhenBootScriptReady()) to the
+ callback function.
+
+ If Context points to dynamically allocated
+ storage, then the callback function must
+ release it.
+
+ @param[in,out] ScratchBuffer Points to reserved memory, allocated by
+ QemuFwCfgS3CallWhenBootScriptReady()
+ internally.
+
+ ScratchBuffer is typed and sized by the client
+ module when it calls
+ QemuFwCfgS3CallWhenBootScriptReady(). The
+ client module defines a union type of
+ structures for ScratchBuffer such that the
+ union can hold client data for any desired
+ fw_cfg DMA read and write operations, and value
+ checking.
+
+ The callback function casts ScratchBuffer to
+ the union type described above. It passes union
+ member sizes as NumberOfBytes to
+ QemuFwCfgS3ScriptReadBytes() and
+ QemuFwCfgS3ScriptWriteBytes(). It passes field
+ addresses and sizes in structures in the union
+ as ScratchData and ValueSize to
+ QemuFwCfgS3ScriptCheckValue().
+
+ ScratchBuffer is aligned at 8 bytes.
+**/
+typedef
+VOID (EFIAPI FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION) (
+ IN OUT VOID *Context, OPTIONAL
+ IN OUT VOID *ScratchBuffer
+ );
+
+
+/**
+ Install the client module's FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION callback for
+ when the production of ACPI S3 Boot Script opcodes becomes possible.
+
+ Take ownership of the client-provided Context, and pass it to the callback
+ function, when the latter is invoked.
+
+ Allocate scratch space for those ACPI S3 Boot Script opcodes to work upon
+ that the client will produce in the callback function.
+
+ @param[in] Callback FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION to invoke
+ when the production of ACPI S3 Boot Script
+ opcodes becomes possible. Callback() may be
+ called immediately from
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ @param[in,out] Context Client-provided data structure for the
+ Callback() callback function to consume.
+
+ If Context points to dynamically allocated
+ memory, then Callback() must release it.
+
+ If Context points to dynamically allocated
+ memory, and
+ QemuFwCfgS3CallWhenBootScriptReady() returns
+ successfully, then the caller of
+ QemuFwCfgS3CallWhenBootScriptReady() must
+ neither dereference nor even evaluate Context
+ any longer, as ownership of the referenced area
+ has been transferred to Callback().
+
+ @param[in] ScratchBufferSize The size of the scratch buffer that will hold,
+ in reserved memory, all client data read,
+ written, and checked by the ACPI S3 Boot Script
+ opcodes produced by Callback().
+
+ @retval RETURN_UNSUPPORTED The library instance does not support this
+ function.
+
+ @retval RETURN_NOT_FOUND The fw_cfg DMA interface to QEMU is
+ unavailable.
+
+ @retval RETURN_BAD_BUFFER_SIZE ScratchBufferSize is too large.
+
+ @retval RETURN_OUT_OF_RESOURCES Memory allocation failed.
+
+ @retval RETURN_SUCCESS Callback() has been installed, and the
+ ownership of Context has been transferred.
+ Reserved memory has been allocated for the
+ scratch buffer.
+
+ A successful invocation of
+ QemuFwCfgS3CallWhenBootScriptReady() cannot
+ be rolled back.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3CallWhenBootScriptReady (
+ IN FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION *Callback,
+ IN OUT VOID *Context, OPTIONAL
+ IN UINTN ScratchBufferSize
+ );
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that (optionally) select an fw_cfg item,
+ and transfer data to it.
+
+ The opcodes produced by QemuFwCfgS3ScriptWriteBytes() will first restore
+ NumberOfBytes bytes in ScratchBuffer in-place, in reserved memory, then write
+ them to fw_cfg using DMA.
+
+ If the operation fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] FirmwareConfigItem The UINT16 selector key of the firmware config
+ item to write, expressed as INT32. If
+ FirmwareConfigItem is -1, no selection is
+ made, the write will occur to the currently
+ selected item, at its currently selected
+ offset. Otherwise, the specified item will be
+ selected, and the write will occur at offset
+ 0.
+
+ @param[in] NumberOfBytes Size of the data to restore in ScratchBuffer,
+ and to write from ScratchBuffer, during S3
+ resume. NumberOfBytes must not exceed
+ ScratchBufferSize, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER FirmwareConfigItem is invalid.
+
+ @retval RETURN_BAD_BUFFER_SIZE NumberOfBytes is larger than
+ ScratchBufferSize.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptWriteBytes (
+ IN INT32 FirmwareConfigItem,
+ IN UINTN NumberOfBytes
+ );
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that (optionally) select an fw_cfg item,
+ and transfer data from it.
+
+ The opcodes produced by QemuFwCfgS3ScriptReadBytes() will read NumberOfBytes
+ bytes from fw_cfg using DMA, storing the result in ScratchBuffer, in reserved
+ memory.
+
+ If the operation fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] FirmwareConfigItem The UINT16 selector key of the firmware config
+ item to read, expressed as INT32. If
+ FirmwareConfigItem is -1, no selection is
+ made, the read will occur from the currently
+ selected item, from its currently selected
+ offset. Otherwise, the specified item will be
+ selected, and the read will occur from offset
+ 0.
+
+ @param[in] NumberOfBytes Size of the data to read during S3 resume.
+ NumberOfBytes must not exceed
+ ScratchBufferSize, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER FirmwareConfigItem is invalid.
+
+ @retval RETURN_BAD_BUFFER_SIZE NumberOfBytes is larger than
+ ScratchBufferSize.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptReadBytes (
+ IN INT32 FirmwareConfigItem,
+ IN UINTN NumberOfBytes
+ );
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that (optionally) select an fw_cfg item,
+ and increase its offset.
+
+ If the operation fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] FirmwareConfigItem The UINT16 selector key of the firmware config
+ item to advance the offset of, expressed as
+ INT32. If FirmwareConfigItem is -1, no
+ selection is made, and the offset for the
+ currently selected item is increased.
+ Otherwise, the specified item will be
+ selected, and the offset increment will occur
+ from offset 0.
+
+ @param[in] NumberOfBytes The number of bytes to skip in the subject
+ fw_cfg item.
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER FirmwareConfigItem is invalid.
+
+ @retval RETURN_BAD_BUFFER_SIZE NumberOfBytes is too large.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptSkipBytes (
+ IN INT32 FirmwareConfigItem,
+ IN UINTN NumberOfBytes
+ );
+
+
+/**
+ Produce ACPI S3 Boot Script opcodes that check a value in ScratchBuffer.
+
+ If the check fails during S3 resume, the boot script will hang.
+
+ This function may only be called from the client module's
+ FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION, which was passed to
+ QemuFwCfgS3CallWhenBootScriptReady() as Callback.
+
+ @param[in] ScratchData Pointer to the UINT8, UINT16, UINT32 or UINT64 field
+ in ScratchBuffer that should be checked. The caller
+ is responsible for populating the field during S3
+ resume, by calling QemuFwCfgS3ScriptReadBytes() ahead
+ of QemuFwCfgS3ScriptCheckValue().
+
+ ScratchData must point into ScratchBuffer, which was
+ allocated, and passed to Callback(), by
+ QemuFwCfgS3CallWhenBootScriptReady().
+
+ ScratchData must be aligned at ValueSize bytes.
+
+ @param[in] ValueSize One of 1, 2, 4 or 8, specifying the size of the field
+ to check.
+
+ @param[in] ValueMask The value read from ScratchData is binarily AND-ed
+ with ValueMask, and the result is compared against
+ Value. If the masked data equals Value, the check
+ passes, and the boot script can proceed. Otherwise,
+ the check fails, and the boot script hangs.
+
+ @param[in] Value Refer to ValueMask.
+
+ @retval RETURN_SUCCESS The opcodes were appended to the ACPI S3
+ Boot Script successfully. There is no way
+ to undo this action.
+
+ @retval RETURN_INVALID_PARAMETER ValueSize is invalid.
+
+ @retval RETURN_INVALID_PARAMETER ValueMask or Value cannot be represented in
+ ValueSize bytes.
+
+ @retval RETURN_INVALID_PARAMETER ScratchData is not aligned at ValueSize
+ bytes.
+
+ @retval RETURN_BAD_BUFFER_SIZE The ValueSize bytes at ScratchData aren't
+ wholly contained in the ScratchBufferSize
+ bytes at ScratchBuffer.
+
+ @return Error codes from underlying functions.
+**/
+EFIAPI
+RETURN_STATUS
+QemuFwCfgS3ScriptCheckValue (
+ IN VOID *ScratchData,
+ IN UINT8 ValueSize,
+ IN UINT64 ValueMask,
+ IN UINT64 Value
+ );
+
#endif
|