diff options
Diffstat (limited to 'OvmfPkg')
21 files changed, 478 insertions, 332 deletions
diff --git a/OvmfPkg/ResetVector/Bin/ResetVector.ia32.port80.raw b/OvmfPkg/ResetVector/Bin/ResetVector.ia32.port80.raw Binary files differnew file mode 100644 index 0000000000..b136e69af9 --- /dev/null +++ b/OvmfPkg/ResetVector/Bin/ResetVector.ia32.port80.raw diff --git a/OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw b/OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw Binary files differindex 76286b9fa3..f772255004 100644 --- a/OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw +++ b/OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw diff --git a/OvmfPkg/ResetVector/Bin/ResetVector.ia32.serial.raw b/OvmfPkg/ResetVector/Bin/ResetVector.ia32.serial.raw Binary files differnew file mode 100644 index 0000000000..7b17db95e3 --- /dev/null +++ b/OvmfPkg/ResetVector/Bin/ResetVector.ia32.serial.raw diff --git a/OvmfPkg/ResetVector/Bin/ResetVector.x64.port80.raw b/OvmfPkg/ResetVector/Bin/ResetVector.x64.port80.raw Binary files differnew file mode 100644 index 0000000000..307fc666a5 --- /dev/null +++ b/OvmfPkg/ResetVector/Bin/ResetVector.x64.port80.raw diff --git a/OvmfPkg/ResetVector/Bin/ResetVector.x64.raw b/OvmfPkg/ResetVector/Bin/ResetVector.x64.raw Binary files differindex adf44b1028..aff1447b99 100644 --- a/OvmfPkg/ResetVector/Bin/ResetVector.x64.raw +++ b/OvmfPkg/ResetVector/Bin/ResetVector.x64.raw diff --git a/OvmfPkg/ResetVector/Bin/ResetVector.x64.serial.raw b/OvmfPkg/ResetVector/Bin/ResetVector.x64.serial.raw Binary files differnew file mode 100644 index 0000000000..3224e3f3b4 --- /dev/null +++ b/OvmfPkg/ResetVector/Bin/ResetVector.x64.serial.raw diff --git a/OvmfPkg/ResetVector/Build.py b/OvmfPkg/ResetVector/Build.py new file mode 100644 index 0000000000..ff723c8fd0 --- /dev/null +++ b/OvmfPkg/ResetVector/Build.py @@ -0,0 +1,53 @@ +## @file +# Automate the process of building the various reset vector types +# +# Copyright (c) 2009, Intel Corporation +# +# All rights reserved. This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +import glob +import os +import subprocess +import sys + +def RunCommand(commandLine): + #print ' '.join(commandLine) + return subprocess.call(commandLine) + +for filename in glob.glob(os.path.join('Bin', '*.raw')): + os.remove(filename) + +for arch in ('ia32', 'x64'): + for debugType in (None, 'port80', 'serial'): + output = os.path.join('Bin', 'ResetVector') + output += '.' + arch + if debugType is not None: + output += '.' + debugType + output += '.raw' + commandLine = ( + 'nasm', + '-D', 'ARCH_%s' % arch.upper(), + '-D', 'DEBUG_%s' % str(debugType).upper(), + '-o', output, + 'ResetVectorCode.asm', + ) + ret = RunCommand(commandLine) + print '\tASM\t' + output + if ret != 0: sys.exit(ret) + + commandLine = ( + 'python', + 'Tools/FixupForRawSection.py', + output, + ) + print '\tFIXUP\t' + output + ret = RunCommand(commandLine) + if ret != 0: sys.exit(ret) + diff --git a/OvmfPkg/ResetVector/CommonMacros.inc b/OvmfPkg/ResetVector/CommonMacros.inc index 19c6d07a3f..c25c8663ed 100644 --- a/OvmfPkg/ResetVector/CommonMacros.inc +++ b/OvmfPkg/ResetVector/CommonMacros.inc @@ -1,4 +1,6 @@ ;------------------------------------------------------------------------------
+; @file
+; Common macros used in the ResetVector VTF module.
;
; Copyright (c) 2008, Intel Corporation
; All rights reserved. This program and the accompanying materials
@@ -9,25 +11,11 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; CommonMacros.inc
-;
-; Abstract:
-;
-; Common macros used in the ResetVector VTF module.
-;
;------------------------------------------------------------------------------
%define ADDR16_OF(x) (0x10000 - fourGigabytes + x)
%define ADDR_OF(x) (0x100000000 - fourGigabytes + x)
-%macro callEdx 1
- mov edx, ADDR_OF(%%returnLabel)
- jmp %1
-%%returnLabel:
-%endmacro
-
%macro OneTimeCall 1
jmp %1
%1 %+ OneTimerCallReturn:
diff --git a/OvmfPkg/ResetVector/Ia16/ResetVectorOldTools.asm b/OvmfPkg/ResetVector/DebugDisabled.asm index 75e259b0b6..78389f4e45 100644 --- a/OvmfPkg/ResetVector/Ia16/ResetVectorOldTools.asm +++ b/OvmfPkg/ResetVector/DebugDisabled.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; Debug disabled
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,43 +11,16 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; Reset-16Bit-old-tools.asm
-;
-; Abstract:
-;
-; First code exectuted by processor after resetting.
-;
;------------------------------------------------------------------------------
-BITS 16
-
-earlyInit_Real16:
+BITS 16
- jmp real16InitSerialPort
-real16SerialPortInitReturn:
-
- jmp to32BitFlat
-
-ALIGN 16
-
-;
-; Junk data. Old GenFv tool will modify data here.
-;
- DQ 0, 0
-
-;
-; Reset Vector
-;
-; This is where the processor will begin execution
-;
- jmp short earlyInit_Real16
-
-;
-; Junk data. Old GenFv tool will modify data here.
-;
-ALIGN 16
+%macro debugInitialize 0
+ ;
+ ; No initialization is required
+ ;
+%endmacro
-fourGigabytes:
+%macro debugShowPostCode 1
+%endmacro
diff --git a/OvmfPkg/ResetVector/Ia16/16RealTo32Flat.asm b/OvmfPkg/ResetVector/Ia16/16RealTo32Flat.asm index d030c0b52b..47e3c6d929 100644 --- a/OvmfPkg/ResetVector/Ia16/16RealTo32Flat.asm +++ b/OvmfPkg/ResetVector/Ia16/16RealTo32Flat.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; Transition from 16 bit real mode into 32 bit flat protected mode
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2008 - 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,14 +11,6 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; 16RealTo32Flat.asm
-;
-; Abstract:
-;
-; Transition from 16 bit real mode into 32 bit flat protected mode
-;
;------------------------------------------------------------------------------
%define SEC_DEFAULT_CR0 0x40000023
@@ -24,11 +18,12 @@ BITS 16
-to32BitFlat:
+;
+; Modified: EAX, EBX
+;
+TransitionFromReal16To32BitFlat:
- writeToSerialPort '1'
- writeToSerialPort '6'
- writeToSerialPort ' '
+ debugShowPostCode POSTCODE_16BIT_MODE
cli
@@ -42,10 +37,6 @@ o32 lgdt [bx] mov eax, SEC_DEFAULT_CR0
mov cr0, eax
-; mov eax, cr0
-; or al, 1
-; mov cr0, eax
-
jmp LINEAR_CODE_SEL:dword ADDR_OF(jumpTo32BitAndLandHere)
BITS 32
jumpTo32BitAndLandHere:
@@ -53,18 +44,16 @@ jumpTo32BitAndLandHere: mov eax, SEC_DEFAULT_CR4
mov cr4, eax
- writeToSerialPort '3'
- writeToSerialPort '2'
- writeToSerialPort ' '
+ debugShowPostCode POSTCODE_32BIT_MODE
- mov ax, LINEAR_SEL
- mov ds, ax
- mov es, ax
- mov fs, ax
- mov gs, ax
- mov ss, ax
+ mov ax, LINEAR_SEL
+ mov ds, ax
+ mov es, ax
+ mov fs, ax
+ mov gs, ax
+ mov ss, ax
- jmp TransitionFrom16RealTo32FlatComplete
+ OneTimeCallRet TransitionFromReal16To32BitFlat
ALIGN 2
@@ -77,75 +66,75 @@ ALIGN 16 GDT_BASE:
; null descriptor
NULL_SEL equ $-GDT_BASE
- dw 0 ; limit 15:0
- dw 0 ; base 15:0
- db 0 ; base 23:16
- db 0 ; type
- db 0 ; limit 19:16, flags
- db 0 ; base 31:24
+ dw 0 ; limit 15:0
+ dw 0 ; base 15:0
+ db 0 ; base 23:16
+ db 0 ; type
+ db 0 ; limit 19:16, flags
+ db 0 ; base 31:24
; linear data segment descriptor
LINEAR_SEL equ $-GDT_BASE
- dw 0FFFFh ; limit 0xFFFFF
- dw 0 ; base 0
- db 0
- db 092h ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
- db 0
+ dw 0FFFFh ; limit 0xFFFFF
+ dw 0 ; base 0
+ db 0
+ db 092h ; present, ring 0, data, expand-up, writable
+ db 0CFh ; page-granular, 32-bit
+ db 0
; linear code segment descriptor
LINEAR_CODE_SEL equ $-GDT_BASE
- dw 0FFFFh ; limit 0xFFFFF
- dw 0 ; base 0
- db 0
- db 09Ah ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
- db 0
+ dw 0FFFFh ; limit 0xFFFFF
+ dw 0 ; base 0
+ db 0
+ db 09Ah ; present, ring 0, data, expand-up, writable
+ db 0CFh ; page-granular, 32-bit
+ db 0
; system data segment descriptor
SYS_DATA_SEL equ $-GDT_BASE
- dw 0FFFFh ; limit 0xFFFFF
- dw 0 ; base 0
- db 0
- db 092h ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
- db 0
+ dw 0FFFFh ; limit 0xFFFFF
+ dw 0 ; base 0
+ db 0
+ db 092h ; present, ring 0, data, expand-up, writable
+ db 0CFh ; page-granular, 32-bit
+ db 0
; system code segment descriptor
SYS_CODE_SEL equ $-GDT_BASE
- dw 0FFFFh ; limit 0xFFFFF
- dw 0 ; base 0
- db 0
- db 09Ah ; present, ring 0, data, expand-up, writable
- db 0CFh ; page-granular, 32-bit
- db 0
+ dw 0FFFFh ; limit 0xFFFFF
+ dw 0 ; base 0
+ db 0
+ db 09Ah ; present, ring 0, data, expand-up, writable
+ db 0CFh ; page-granular, 32-bit
+ db 0
; spare segment descriptor
LINEAR_CODE64_SEL equ $-GDT_BASE
- DW -1 ; LimitLow
- DW 0 ; BaseLow
- DB 0 ; BaseMid
+ DW -1 ; LimitLow
+ DW 0 ; BaseLow
+ DB 0 ; BaseMid
DB 9bh
- DB 0afh ; LimitHigh (CS.L=1, CS.D=0)
- DB 0 ; BaseHigh
+ DB 0afh ; LimitHigh (CS.L=1, CS.D=0)
+ DB 0 ; BaseHigh
; spare segment descriptor
SPARE4_SEL equ $-GDT_BASE
- dw 0 ; limit 0xFFFFF
- dw 0 ; base 0
- db 0
- db 0 ; present, ring 0, data, expand-up, writable
- db 0 ; page-granular, 32-bit
- db 0
+ dw 0 ; limit 0xFFFFF
+ dw 0 ; base 0
+ db 0
+ db 0 ; present, ring 0, data, expand-up, writable
+ db 0 ; page-granular, 32-bit
+ db 0
; spare segment descriptor
SPARE5_SEL equ $-GDT_BASE
- dw 0 ; limit 0xFFFFF
- dw 0 ; base 0
- db 0
- db 0 ; present, ring 0, data, expand-up, writable
- db 0 ; page-granular, 32-bit
- db 0
+ dw 0 ; limit 0xFFFFF
+ dw 0 ; base 0
+ db 0
+ db 0 ; present, ring 0, data, expand-up, writable
+ db 0 ; page-granular, 32-bit
+ db 0
GDT_END:
diff --git a/OvmfPkg/ResetVector/Ia16/Init16.asm b/OvmfPkg/ResetVector/Ia16/Init16.asm new file mode 100644 index 0000000000..3d3d8b0267 --- /dev/null +++ b/OvmfPkg/ResetVector/Ia16/Init16.asm @@ -0,0 +1,48 @@ +;------------------------------------------------------------------------------
+; @file
+; 16-bit initialization code
+;
+; Copyright (c) 2008 - 2009, Intel Corporation
+; All rights reserved. This program and the accompanying materials
+; are licensed and made available under the terms and conditions of the BSD License
+; which accompanies this distribution. The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+;------------------------------------------------------------------------------
+
+
+BITS 16
+
+;
+; @param[out] DI 'BP' to indicate boot-strap processor
+;
+EarlyBspInitReal16:
+ mov di, 'BP'
+ jmp short Main16
+
+;
+; @param[out] DI 'AP' to indicate application processor
+;
+EarlyApInitReal16:
+ mov di, 'AP'
+ jmp short Main16
+
+;
+; Modified: EAX
+;
+; @param[in] EAX Initial value of the EAX register (BIST: Built-in Self Test)
+; @param[out] ESP Initial value of the EAX register (BIST: Built-in Self Test)
+;
+EarlyInit16:
+ ;
+ ; ESP - Initial value of the EAX register (BIST: Built-in Self Test)
+ ;
+ mov esp, eax
+
+ debugInitialize
+
+ OneTimeCallRet EarlyInit16
+
diff --git a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm index 63aeaf6b24..0eff743183 100644 --- a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm +++ b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; First code exectuted by processor after resetting.
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2008 - 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,28 +11,25 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; Reset-16Bit-vft0.asm
-;
-; Abstract:
-;
-; First code exectuted by processor after resetting.
-;
;------------------------------------------------------------------------------
-BITS 16
-
-earlyInit_Real16:
+BITS 16
- jmp real16InitSerialPort
-real16SerialPortInitReturn:
+ALIGN 16
- jmp to32BitFlat
+applicationProcessorEntryPoint:
+;
+; Application Processors entry point
+;
+; GenFv generates code aligned on a 4k boundary which will jump to this
+; location. (0xffffffe0) This allows the Local APIC Startup IPI to be
+; used to wake up the application processors.
+;
+ jmp short EarlyApInitReal16
-ALIGN 16
+ALIGN 8
- DD 0, 0, 0
+ DD 0
;
; The VTF signature
@@ -39,16 +38,20 @@ ALIGN 16 ; any fixups.
;
vtfSignature:
- DB 'V', 'T', 'F', 0
+ DB 'V', 'T', 'F', 0
+
+ALIGN 16
+resetVector:
;
; Reset Vector
;
; This is where the processor will begin execution
;
- jmp short earlyInit_Real16
+ wbinvd
+ jmp short EarlyBspInitReal16
-ALIGN 16
+ALIGN 16
fourGigabytes:
diff --git a/OvmfPkg/ResetVector/Ia32/32FlatTo64Flat.asm b/OvmfPkg/ResetVector/Ia32/32FlatTo64Flat.asm index f0528d4460..a97f9cc707 100644 --- a/OvmfPkg/ResetVector/Ia32/32FlatTo64Flat.asm +++ b/OvmfPkg/ResetVector/Ia32/32FlatTo64Flat.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; Transition from 32 bit flat protected mode into 64 bit flat protected mode
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2008 - 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,18 +11,13 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; 32FlatTo64Flat.asm
-;
-; Abstract:
-;
-; Transition from 32 bit flat protected mode into 64 bit flat protected mode
-;
;------------------------------------------------------------------------------
BITS 32
+;
+; Modified: EAX
+;
Transition32FlatTo64Flat:
mov eax, ((ADDR_OF_START_OF_RESET_CODE & ~0xfff) - 0x1000)
@@ -43,9 +40,7 @@ Transition32FlatTo64Flat: BITS 64
jumpTo64BitAndLandHere:
- writeToSerialPort '6'
- writeToSerialPort '4'
- writeToSerialPort ' '
+ debugShowPostCode POSTCODE_64BIT_MODE
OneTimeCallRet Transition32FlatTo64Flat
diff --git a/OvmfPkg/ResetVector/Ia32/SearchForBfvBase.asm b/OvmfPkg/ResetVector/Ia32/SearchForBfvBase.asm index e6ca6e6ffb..21b64f46e3 100644 --- a/OvmfPkg/ResetVector/Ia32/SearchForBfvBase.asm +++ b/OvmfPkg/ResetVector/Ia32/SearchForBfvBase.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; Search for the Boot Firmware Volume (BFV) base address
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2008 - 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,14 +11,6 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; SearchForBfvBase.asm
-;
-; Abstract:
-;
-; Search for the Boot FV Base Address
-;
;------------------------------------------------------------------------------
;#define EFI_FIRMWARE_FILE_SYSTEM2_GUID \
@@ -29,21 +23,21 @@ BITS 32
;
-; Input:
-; None
+; Modified: EAX, EBX
+; Preserved: EDI, ESP
;
-; Output:
-; EBP - BFV Base Address
-;
-; Modified:
-; EAX, EBX
+; @param[out] EBP Address of Boot Firmware Volume (BFV)
;
Flat32SearchForBfvBase:
xor eax, eax
searchingForBfvHeaderLoop:
+ ;
+ ; We check for a firmware volume at every 4KB address in the top 16MB
+ ; just below 4GB. (Addresses at 0xffHHH000 where H is any hex digit.)
+ ;
sub eax, 0x1000
- cmp eax, 0xff800000
+ cmp eax, 0xff000000
jb searchedForBfvHeaderButNotFound
;
@@ -70,19 +64,23 @@ searchingForBfvHeaderLoop: jmp searchedForBfvHeaderAndItWasFound
searchedForBfvHeaderButNotFound:
- writeToSerialPort '!'
- xor eax, eax
+ ;
+ ; Hang if the SEC entry point was not found
+ ;
+ debugShowPostCode POSTCODE_BFV_NOT_FOUND
-searchedForBfvHeaderAndItWasFound:
+ ;
+ ; 0xbfbfbfbf in the EAX & EBP registers helps signal what failed
+ ; for debugging purposes.
+ ;
+ mov eax, 0xBFBFBFBF
mov ebp, eax
+ jmp $
- writeToSerialPort 'B'
- writeToSerialPort 'F'
- writeToSerialPort 'V'
- writeToSerialPort ' '
+searchedForBfvHeaderAndItWasFound:
+ mov ebp, eax
- or ebp, ebp
- jz $
+ debugShowPostCode POSTCODE_BFV_FOUND
OneTimeCallRet Flat32SearchForBfvBase
diff --git a/OvmfPkg/ResetVector/Ia32/SearchForSecAndPeiEntries.asm b/OvmfPkg/ResetVector/Ia32/SearchForSecEntry.asm index 9bb0cd1fa6..01d051918c 100644 --- a/OvmfPkg/ResetVector/Ia32/SearchForSecAndPeiEntries.asm +++ b/OvmfPkg/ResetVector/Ia32/SearchForSecEntry.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; Search for the SEC Core entry point
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2008 - 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,40 +11,26 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; SearchForSecAndPeiEntry.asm
-;
-; Abstract:
-;
-; Search for the SEC Core and PEI Core entry points
-;
;------------------------------------------------------------------------------
BITS 32
%define EFI_FV_FILETYPE_SECURITY_CORE 0x03
-%define EFI_FV_FILETYPE_PEI_CORE 0x04
;
-; Input:
-; EBP - BFV Base Address
+; Modified: EAX, EBX, ECX, EDX
+; Preserved: EDI, EBP, ESP
;
-; Output:
-; ESI - SEC Core Entry Point Address (or 0 if not found)
-; EDI - PEI Core Entry Point Address (or 0 if not found)
+; @param[in] EBP Address of Boot Firmware Volume (BFV)
+; @param[out] ESI SEC Core Entry Point Address
;
-; Modified:
-; EAX, EBX, ECX
-;
-Flat32SearchForSecAndPeiEntries:
+Flat32SearchForSecEntryPoint:
;
; Initialize EBP and ESI to 0
;
xor ebx, ebx
mov esi, ebx
- mov edi, ebx
;
; Pass over the BFV header
@@ -50,7 +38,7 @@ Flat32SearchForSecAndPeiEntries: mov eax, ebp
mov bx, [ebp + 0x30]
add eax, ebx
- jc doneSeachingForSecAndPeiEntries
+ jc secEntryPointWasNotFound
jmp searchingForFfsFileHeaderLoop
@@ -59,17 +47,17 @@ moveForwardWhileSearchingForFfsFileHeaderLoop: ; Make forward progress in the search
;
inc eax
- jc doneSeachingForSecAndPeiEntries
+ jc secEntryPointWasNotFound
searchingForFfsFileHeaderLoop:
test eax, eax
- jz doneSeachingForSecAndPeiEntries
+ jz secEntryPointWasNotFound
;
; Ensure 8 byte alignment
;
add eax, 7
- jc doneSeachingForSecAndPeiEntries
+ jc secEntryPointWasNotFound
and al, 0xf8
;
@@ -82,7 +70,6 @@ searchingForFfsFileHeaderLoop: and ecx, 0x00ffffff
or ecx, ecx
jz moveForwardWhileSearchingForFfsFileHeaderLoop
-; jmp $
add ecx, eax
jz jumpSinceWeFoundTheLastFfsFile
jc moveForwardWhileSearchingForFfsFileHeaderLoop
@@ -91,53 +78,41 @@ jumpSinceWeFoundTheLastFfsFile: ;
; There seems to be a valid file at eax
;
- mov bl, [eax + 0x12] ; BL - File Type
- cmp bl, EFI_FV_FILETYPE_PEI_CORE
- je fileTypeIsPeiCore
- cmp bl, EFI_FV_FILETYPE_SECURITY_CORE
+ cmp byte [eax + 0x12], EFI_FV_FILETYPE_SECURITY_CORE ; Check File Type
jne readyToTryFfsFileAtEcx
fileTypeIsSecCore:
- callEdx GetEntryPointOfFfsFileReturnEdx
- test eax, eax
- jz readyToTryFfsFileAtEcx
-
- mov esi, eax
- jmp readyToTryFfsFileAtEcx
-
-fileTypeIsPeiCore:
- callEdx GetEntryPointOfFfsFileReturnEdx
+ OneTimeCall GetEntryPointOfFfsFile
test eax, eax
- jz readyToTryFfsFileAtEcx
-
- mov edi, eax
+ jnz doneSeachingForSecEntryPoint
readyToTryFfsFileAtEcx:
+ ;
+ ; Try the next FFS file at ECX
+ ;
mov eax, ecx
jmp searchingForFfsFileHeaderLoop
-doneSeachingForSecAndPeiEntries:
+secEntryPointWasNotFound:
+ xor eax, eax
+
+doneSeachingForSecEntryPoint:
+ mov esi, eax
test esi, esi
jnz secCoreEntryPointWasFound
- writeToSerialPort '!'
-secCoreEntryPointWasFound:
- writeToSerialPort 'S'
- writeToSerialPort 'E'
- writeToSerialPort 'C'
- writeToSerialPort ' '
- test edi, edi
- jnz peiCoreEntryPointWasFound
- writeToSerialPort '!'
-peiCoreEntryPointWasFound:
- writeToSerialPort 'P'
- writeToSerialPort 'E'
- writeToSerialPort 'I'
- writeToSerialPort ' '
+secCoreEntryPointWasNotFound:
+ ;
+ ; Hang if the SEC entry point was not found
+ ;
+ debugShowPostCode POSTCODE_SEC_NOT_FOUND
+ jz $
- OneTimeCallRet Flat32SearchForSecAndPeiEntries
+secCoreEntryPointWasFound:
+ debugShowPostCode POSTCODE_SEC_FOUND
+ OneTimeCallRet Flat32SearchForSecEntryPoint
%define EFI_SECTION_PE32 0x10
@@ -152,7 +127,7 @@ peiCoreEntryPointWasFound: ; Modified:
; EBX
;
-GetEntryPointOfFfsFileReturnEdx:
+GetEntryPointOfFfsFile:
test eax, eax
jz getEntryPointOfFfsFileErrorReturn
add eax, 0x18 ; EAX = Start of section
@@ -217,6 +192,5 @@ getEntryPointOfFfsFileErrorReturn: mov eax, 0
getEntryPointOfFfsFileReturn:
- jmp edx
-
+ OneTimeCallRet GetEntryPointOfFfsFile
diff --git a/OvmfPkg/ResetVector/JumpToSec.asm b/OvmfPkg/ResetVector/JumpToSec.asm deleted file mode 100644 index d7442f0e9d..0000000000 --- a/OvmfPkg/ResetVector/JumpToSec.asm +++ /dev/null @@ -1,63 +0,0 @@ -;------------------------------------------------------------------------------
-;
-; Copyright (c) 2008, Intel Corporation
-; All rights reserved. This program and the accompanying materials
-; are licensed and made available under the terms and conditions of the BSD License
-; which accompanies this distribution. The full text of the license may be found at
-; http://opensource.org/licenses/bsd-license.php
-;
-; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-;
-; Module Name:
-;
-; JumpToSec.asm
-;
-; Abstract:
-;
-; Jump from the reset vector binary to SEC
-;
-;------------------------------------------------------------------------------
-
-BITS 32
-
-TransitionFrom16RealTo32FlatComplete:
-
- OneTimeCall Flat32SearchForBfvBase
-
- OneTimeCall Flat32SearchForSecAndPeiEntries
-
- ;
- ; ESI - SEC Core entry point
- ; EDI - PEI Core entry point
- ; EBP - Start of BFV
- ;
- ; Jump to SEC Core entry point
- ;
-
-%ifdef ARCH_IA32
-
- jmp esi
-
-%else
-
- OneTimeCall Transition32FlatTo64Flat
-BITS 64
-
- mov rax, 0x00000000ffffffff
- and rsi, rax
- and rdi, rax
- and rbp, rax
- ;
- ; RSI - SEC Core entry point
- ; RDI - PEI Core entry point
- ; RBP - Start of BFV
- ;
- ; Jump to SEC Core entry point
- ;
-
- jmp rsi
-
-%endif
-
-
diff --git a/OvmfPkg/ResetVector/Main.asm b/OvmfPkg/ResetVector/Main.asm new file mode 100644 index 0000000000..bc2a3b168a --- /dev/null +++ b/OvmfPkg/ResetVector/Main.asm @@ -0,0 +1,106 @@ +;------------------------------------------------------------------------------
+; @file
+; Main routine of the pre-SEC code up through the jump into SEC
+;
+; Copyright (c) 2008 - 2009, Intel Corporation
+; All rights reserved. This program and the accompanying materials
+; are licensed and made available under the terms and conditions of the BSD License
+; which accompanies this distribution. The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+;------------------------------------------------------------------------------
+
+
+BITS 16
+
+;
+; Modified: EBX, ECX, EDX, EBP
+;
+; @param[in,out] RAX/EAX Initial value of the EAX register
+; (BIST: Built-in Self Test)
+; @param[in,out] DI 'BP': boot-strap processor, or
+; 'AP': application processor
+; @param[out] RBP/EBP Address of Boot Firmware Volume (BFV)
+;
+; @return None This routine jumps to SEC and does not return
+;
+Main16:
+ OneTimeCall EarlyInit16
+
+ ;
+ ; Transition the processor from 16-bit real mode to 32-bit flat mode
+ ;
+ OneTimeCall TransitionFromReal16To32BitFlat
+
+BITS 32
+
+ ;
+ ; Search for the Boot Firmware Volume (BFV)
+ ;
+ OneTimeCall Flat32SearchForBfvBase
+
+ ;
+ ; EBP - Start of BFV
+ ;
+
+ ;
+ ; Search for the SEC entry point
+ ;
+ OneTimeCall Flat32SearchForSecEntryPoint
+
+ ;
+ ; ESI - SEC Core entry point
+ ; EBP - Start of BFV
+ ;
+
+%ifdef ARCH_IA32
+
+ ;
+ ; Restore initial EAX value into the EAX register
+ ;
+ mov eax, esp
+
+ ;
+ ; Jump to the 32-bit SEC entry point
+ ;
+ jmp esi
+
+%else
+
+ ;
+ ; Transition the processor from 32-bit flat mode to 64-bit flat mode
+ ;
+ OneTimeCall Transition32FlatTo64Flat
+
+BITS 64
+
+ ;
+ ; Some values were calculated in 32-bit mode. Make sure the upper
+ ; 32-bits of 64-bit registers are zero for these values.
+ ;
+ mov rax, 0x00000000ffffffff
+ and rsi, rax
+ and rbp, rax
+ and rsp, rax
+
+ ;
+ ; RSI - SEC Core entry point
+ ; RBP - Start of BFV
+ ;
+
+ ;
+ ; Restore initial EAX value into the RAX register
+ ;
+ mov rax, rsp
+
+ ;
+ ; Jump to the 64-bit SEC entry point
+ ;
+ jmp rsi
+
+%endif
+
+
diff --git a/OvmfPkg/ResetVector/Port80Debug.asm b/OvmfPkg/ResetVector/Port80Debug.asm new file mode 100644 index 0000000000..2f9d0862e8 --- /dev/null +++ b/OvmfPkg/ResetVector/Port80Debug.asm @@ -0,0 +1,28 @@ +;------------------------------------------------------------------------------
+; @file
+; Port 0x80 debug support macros
+;
+; Copyright (c) 2009, Intel Corporation
+; All rights reserved. This program and the accompanying materials
+; are licensed and made available under the terms and conditions of the BSD License
+; which accompanies this distribution. The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+;------------------------------------------------------------------------------
+
+BITS 16
+
+%macro debugInitialize 0
+ ;
+ ; No initialization is required
+ ;
+%endmacro
+
+%macro debugShowPostCode 1
+ mov al, %1
+ out 0x80, al
+%endmacro
+
diff --git a/OvmfPkg/ResetVector/PostCodes.inc b/OvmfPkg/ResetVector/PostCodes.inc new file mode 100644 index 0000000000..2556aed873 --- /dev/null +++ b/OvmfPkg/ResetVector/PostCodes.inc @@ -0,0 +1,25 @@ +;------------------------------------------------------------------------------
+; @file
+; Definitions of POST CODES for the reset vector module
+;
+; Copyright (c) 2009, Intel Corporation
+; All rights reserved. This program and the accompanying materials
+; are licensed and made available under the terms and conditions of the BSD License
+; which accompanies this distribution. The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+;------------------------------------------------------------------------------
+
+%define POSTCODE_16BIT_MODE 0x16
+%define POSTCODE_32BIT_MODE 0x32
+%define POSTCODE_64BIT_MODE 0x64
+
+%define POSTCODE_BFV_NOT_FOUND 0xb0
+%define POSTCODE_BFV_FOUND 0xb1
+
+%define POSTCODE_SEC_NOT_FOUND 0xf0
+%define POSTCODE_SEC_FOUND 0xf1
+
diff --git a/OvmfPkg/ResetVector/ResetVectorCode.asm b/OvmfPkg/ResetVector/ResetVectorCode.asm index 4339505635..8b13942304 100644 --- a/OvmfPkg/ResetVector/ResetVectorCode.asm +++ b/OvmfPkg/ResetVector/ResetVectorCode.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; This file includes all other code files to assemble the reset vector code
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2008 - 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,14 +11,6 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; ResetVectorCode.asm
-;
-; Abstract:
-;
-; Create code for VTF raw section.
-;
;------------------------------------------------------------------------------
%ifdef ARCH_IA32
@@ -29,15 +23,30 @@ %endif
%include "CommonMacros.inc"
-%include "SerialDebug.asm"
+
+%include "PostCodes.inc"
+
+%ifdef DEBUG_NONE
+ %include "DebugDisabled.asm"
+%elifdef DEBUG_PORT80
+ %include "Port80Debug.asm"
+%elifdef DEBUG_SERIAL
+ %include "SerialDebug.asm"
+%else
+ %error "No debug type was specified."
+%endif
+
%include "Ia32/SearchForBfvBase.asm"
-%include "Ia32/SearchForSecAndPeiEntries.asm"
-%include "JumpToSec.asm"
-%include "Ia16/16RealTo32Flat.asm"
+%include "Ia32/SearchForSecEntry.asm"
%ifdef ARCH_X64
%include "Ia32/32FlatTo64Flat.asm"
%endif
+%include "Ia16/16RealTo32Flat.asm"
+%include "Ia16/Init16.asm"
+
+%include "Main.asm"
+
%include "Ia16/ResetVectorVtf0.asm"
diff --git a/OvmfPkg/ResetVector/SerialDebug.asm b/OvmfPkg/ResetVector/SerialDebug.asm index 2959fa5450..8c2ffc66d3 100644 --- a/OvmfPkg/ResetVector/SerialDebug.asm +++ b/OvmfPkg/ResetVector/SerialDebug.asm @@ -1,6 +1,8 @@ ;------------------------------------------------------------------------------
+; @file
+; Serial port debug support macros
;
-; Copyright (c) 2008, Intel Corporation
+; Copyright (c) 2008 - 2009, Intel Corporation
; All rights reserved. This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
@@ -9,18 +11,8 @@ ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
-; Module Name:
-;
-; SerialDebug.asm
-;
-; Abstract:
-;
-; Serial port support macros
-;
;------------------------------------------------------------------------------
-BITS 16
-
;//---------------------------------------------
;// UART Register Offsets
;//---------------------------------------------
@@ -88,12 +80,38 @@ BITS 16 out dx, al
%endmacro
-%macro writeToSerialPort 1
+%macro debugShowCharacter 1
waitForSerialTxReady
outToSerialPort 0, %1
%endmacro
-real16InitSerialPort:
+%macro debugShowHexDigit 1
+ %if (%1 < 0xa)
+ debugShowCharacter BYTE ('0' + (%1))
+ %else
+ debugShowCharacter BYTE ('a' + ((%1) - 0xa))
+ %endif
+%endmacro
+
+%macro debugNewline 0
+ debugShowCharacter `\r`
+ debugShowCharacter `\n`
+%endmacro
+
+%macro debugShowPostCode 1
+ debugShowHexDigit (((%1) >> 4) & 0xf)
+ debugShowHexDigit ((%1) & 0xf)
+ debugNewline
+%endmacro
+
+BITS 16
+
+%macro debugInitialize 0
+ jmp real16InitDebug
+real16InitDebugReturn:
+%endmacro
+
+real16InitDebug:
;
; Set communications format
;
@@ -110,5 +128,5 @@ real16InitSerialPort: ;
outToSerialPort LCR_OFFSET, SERIAL_DEFAULT_LCR
- jmp real16SerialPortInitReturn
+ jmp real16InitDebugReturn
|