diff options
Diffstat (limited to 'PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c')
| -rw-r--r-- | PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c | 965 |
1 files changed, 812 insertions, 153 deletions
diff --git a/PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c b/PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c index 36f83f62e0..9230434185 100644 --- a/PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c +++ b/PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c @@ -1,14 +1,14 @@ /** @file
PCI Root Bridge Io Protocol implementation
- Copyright (c) 2008 - 2009, Intel Corporation<BR> All rights
- reserved. This program and the accompanying materials are
- licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved. <BR>
+This program and the accompanying materials are
+licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
@@ -33,6 +33,35 @@ RESOURCE_CONFIGURATION Configuration = { // Protocol Member Function Prototypes
//
+/**
+ Polls an address in memory mapped I/O space until an exit condition is met, or
+ a timeout occurs.
+
+ This function provides a standard way to poll a PCI memory location. A PCI memory read
+ operation is performed at the PCI memory address specified by Address for the width specified
+ by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
+ read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
+ Mask) is equal to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the memory operations. The caller is
+ responsible for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the memory address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPollMem (
@@ -45,6 +74,35 @@ RootBridgeIoPollMem ( OUT UINT64 *Result
);
+/**
+ Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
+ satisfied or after a defined duration.
+
+ This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
+ performed at the PCI I/O address specified by Address for the width specified by Width.
+ The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
+ repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
+ to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the I/O operations.
+ @param[in] Address The base address of the I/O operations. The caller is responsible
+ for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the I/O address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPollIo (
@@ -57,6 +115,29 @@ RootBridgeIoPollIo ( OUT UINT64 *Result
);
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoMemRead (
@@ -67,6 +148,28 @@ RootBridgeIoMemRead ( IN OUT VOID *Buffer
);
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+**/
EFI_STATUS
EFIAPI
RootBridgeIoMemWrite (
@@ -77,6 +180,24 @@ RootBridgeIoMemWrite ( IN OUT VOID *Buffer
);
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoIoRead (
@@ -87,6 +208,24 @@ RootBridgeIoIoRead ( IN OUT VOID *UserBuffer
);
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoIoWrite (
@@ -97,6 +236,30 @@ RootBridgeIoIoWrite ( IN OUT VOID *UserBuffer
);
+/**
+ Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
+ root bridge memory space.
+
+ The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
+ space to another region of PCI root bridge memory space. This is especially useful for video scroll
+ operation on a memory mapped video buffer.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI root bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] DestAddress The destination address of the memory operation. The caller is
+ responsible for aligning the DestAddress if required.
+ @param[in] SrcAddress The source address of the memory operation. The caller is
+ responsible for aligning the SrcAddress if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at DestAddress and SrcAddress.
+
+ @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoCopyMem (
@@ -107,6 +270,29 @@ RootBridgeIoCopyMem ( IN UINTN Count
);
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPciRead (
@@ -117,6 +303,29 @@ RootBridgeIoPciRead ( IN OUT VOID *Buffer
);
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPciWrite (
@@ -127,6 +336,32 @@ RootBridgeIoPciWrite ( IN OUT VOID *Buffer
);
+/**
+ Provides the PCI controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ The Map() function provides the PCI controller specific addresses needed to access system
+ memory. This function is used to map system memory for PCI bus master DMA accesses.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Operation Indicates if the bus master is going to read or write to system memory.
+ @param[in] HostAddress The system memory address to map to the PCI controller.
+ @param[in][out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
+ @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
+ to access the system memory's HostAddress.
+ @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_INVALID_PARAMETER Operation is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
+ @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
+ @retval EFI_INVALID_PARAMETER Mapping is NULL.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoMap (
@@ -138,6 +373,22 @@ RootBridgeIoMap ( OUT VOID **Mapping
);
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ The Unmap() function completes the Map() operation and releases any corresponding resources.
+ If the operation was an EfiPciOperationBusMasterWrite or
+ EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
+ Any resources used for the mapping are freed.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+ @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
+ @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoUnmap (
@@ -145,6 +396,27 @@ RootBridgeIoUnmap ( IN VOID *Mapping
);
+/**
+ Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
+ EfiPciOperationBusMasterCommonBuffer64 mapping.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range. Only
+ the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
+ and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_INVALID_PARAMETER MemoryType is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoAllocateBuffer (
@@ -156,6 +428,20 @@ RootBridgeIoAllocateBuffer ( IN UINT64 Attributes
);
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+ was not allocated with AllocateBuffer().
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoFreeBuffer (
@@ -164,12 +450,51 @@ RootBridgeIoFreeBuffer ( OUT VOID *HostAddress
);
+/**
+ Flushes all PCI posted write transactions from a PCI host bridge to system memory.
+
+ The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
+ memory. Posted write transactions are generated by PCI bus masters when they perform write
+ transactions to target addresses in system memory.
+ This function does not flush posted write transactions from any PCI bridges. A PCI controller
+ specific action must be taken to guarantee that the posted write transactions have been flushed from
+ the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
+ a PCI read transaction from the PCI controller prior to calling Flush().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+
+ @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
+ bridge to system memory.
+ @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
+ host bridge due to a hardware error.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoFlush (
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
);
+/**
+ Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
+ attributes that a PCI root bridge is currently using.
+
+ The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
+ and the mask of attributes that the PCI root bridge is currently using.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Supported A pointer to the mask of attributes that this PCI root bridge
+ supports setting with SetAttributes().
+ @param Attributes A pointer to the mask of attributes that this PCI root bridge is
+ currently using.
+
+ @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
+ bridge supports is returned in Supports. If Attributes is
+ not NULL, then the attributes that the PCI root bridge is currently
+ using is returned in Attributes.
+ @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoGetAttributes (
@@ -178,6 +503,36 @@ RootBridgeIoGetAttributes ( OUT UINT64 *Attributes
);
+/**
+ Sets attributes for a resource range on a PCI root bridge.
+
+ The SetAttributes() function sets the attributes specified in Attributes for the PCI root
+ bridge on the resource range specified by ResourceBase and ResourceLength. Since the
+ granularity of setting these attributes may vary from resource type to resource type, and from
+ platform to platform, the actual resource range and the one passed in by the caller may differ. As a
+ result, this function may set the attributes specified by Attributes on a larger resource range
+ than the caller requested. The actual range is returned in ResourceBase and
+ ResourceLength. The caller is responsible for verifying that the actual range for which the
+ attributes were set is acceptable.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Attributes The mask of attributes to set. If the attribute bit
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
+ MEMORY_DISABLE is set, then the resource range is specified by
+ ResourceBase and ResourceLength. If
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
+ MEMORY_DISABLE are not set, then ResourceBase and
+ ResourceLength are ignored, and may be NULL.
+ @param[in][out] ResourceBase A pointer to the base address of the resource range to be modified
+ by the attributes specified by Attributes.
+ @param[in][out] ResourceLength A pointer to the length of the resource range to be modified by the
+ attributes specified by Attributes.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoSetAttributes (
@@ -187,6 +542,29 @@ RootBridgeIoSetAttributes ( IN OUT UINT64 *ResourceLength
);
+/**
+ Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
+ resource descriptors.
+
+ There are only two resource descriptor types from the ACPI Specification that may be used to
+ describe the current resources allocated to a PCI root bridge. These are the QWORD Address
+ Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
+ QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
+ or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
+ Address Space Descriptors followed by an End Tag.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
+ current configuration of this PCI root bridge. The storage for the
+ ACPI 2.0 resource descriptors is allocated by this function. The
+ caller must treat the return buffer as read-only data, and the buffer
+ must not be freed by the caller.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoConfiguration (
@@ -197,6 +575,24 @@ RootBridgeIoConfiguration ( //
// Sub Function Prototypes
//
+/**
+ Internal help function for read and write PCI configuration space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Write Switch value for Read or Write.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] UserBuffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
RootBridgeIoPciRW (
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
@@ -213,6 +609,18 @@ RootBridgeIoPciRW ( EFI_METRONOME_ARCH_PROTOCOL *mMetronome;
EFI_CPU_IO2_PROTOCOL *mCpuIo;
+/**
+
+ Construct the Pci Root Bridge Io protocol
+
+ @param Protocol Point to protocol instance
+ @param HostBridgeHandle Handle of host bridge
+ @param Attri Attribute of host bridge
+ @param ResAppeture ResourceAppeture for host bridge
+
+ @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
+
+**/
EFI_STATUS
RootBridgeConstructor (
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
@@ -220,21 +628,6 @@ RootBridgeConstructor ( IN UINT64 Attri,
IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture
)
-/*++
-
-Routine Description:
-
- Construct the Pci Root Bridge Io protocol
-
-Arguments:
-
- Protocol - protocol to initialize
-
-Returns:
-
- None
-
---*/
{
EFI_STATUS Status;
PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
@@ -322,6 +715,35 @@ Returns: return EFI_SUCCESS;
}
+/**
+ Polls an address in memory mapped I/O space until an exit condition is met, or
+ a timeout occurs.
+
+ This function provides a standard way to poll a PCI memory location. A PCI memory read
+ operation is performed at the PCI memory address specified by Address for the width specified
+ by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
+ read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
+ Mask) is equal to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the memory operations. The caller is
+ responsible for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the memory address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPollMem (
@@ -333,16 +755,6 @@ RootBridgeIoPollMem ( IN UINT64 Delay,
OUT UINT64 *Result
)
-/*++
-
-Routine Description:
- Memory Poll
-
-Arguments:
-
-Returns:
-
---*/
{
EFI_STATUS Status;
UINT64 NumberOfTicks;
@@ -406,6 +818,35 @@ Returns: return EFI_TIMEOUT;
}
+/**
+ Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
+ satisfied or after a defined duration.
+
+ This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
+ performed at the PCI I/O address specified by Address for the width specified by Width.
+ The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
+ repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
+ to Value.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the I/O operations.
+ @param[in] Address The base address of the I/O operations. The caller is responsible
+ for aligning Address if required.
+ @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
+ are ignored. The bits in the bytes below Width which are zero in
+ Mask are ignored when polling the I/O address.
+ @param[in] Value The comparison value used for the polling exit criteria.
+ @param[in] Delay The number of 100 ns units to poll. Note that timer available may
+ be of poorer granularity.
+ @param[out] Result Pointer to the last value read from the memory location.
+
+ @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
+ @retval EFI_INVALID_PARAMETER Width is invalid.
+ @retval EFI_INVALID_PARAMETER Result is NULL.
+ @retval EFI_TIMEOUT Delay expired before a match occurred.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPollIo (
@@ -417,16 +858,6 @@ RootBridgeIoPollIo ( IN UINT64 Delay,
OUT UINT64 *Result
)
-/*++
-
-Routine Description:
- Io Poll
-
-Arguments:
-
-Returns:
-
---*/
{
EFI_STATUS Status;
UINT64 NumberOfTicks;
@@ -488,6 +919,29 @@ Returns: return EFI_TIMEOUT;
}
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoMemRead (
@@ -497,16 +951,6 @@ RootBridgeIoMemRead ( IN UINTN Count,
IN OUT VOID *Buffer
)
-/*++
-
-Routine Description:
- Memory read
-
-Arguments:
-
-Returns:
-
---*/
{
PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OldWidth;
@@ -546,6 +990,28 @@ Returns: Address, OldCount, Buffer);
}
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
+
+ The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
+ registers in the PCI root bridge memory space.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operation.
+ @param[in] Address The base address of the memory operation. The caller is
+ responsible for aligning the Address if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+**/
EFI_STATUS
EFIAPI
RootBridgeIoMemWrite (
@@ -555,16 +1021,6 @@ RootBridgeIoMemWrite ( IN UINTN Count,
IN OUT VOID *Buffer
)
-/*++
-
-Routine Description:
- Memory write
-
-Arguments:
-
-Returns:
-
---*/
{
PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OldWidth;
@@ -603,6 +1059,24 @@ Returns: Address, OldCount, Buffer);
}
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoIoRead (
@@ -612,16 +1086,6 @@ RootBridgeIoIoRead ( IN UINTN Count,
IN OUT VOID *Buffer
)
-/*++
-
-Routine Description:
- Io read
-
-Arguments:
-
-Returns:
-
---*/
{
@@ -671,6 +1135,24 @@ Returns: }
+/**
+ Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The base address of the I/O operation. The caller is responsible for
+ aligning the Address if required.
+ @param[in] Count The number of I/O operations to perform. Bytes moved is Width
+ size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoIoWrite (
@@ -680,16 +1162,6 @@ RootBridgeIoIoWrite ( IN UINTN Count,
IN OUT VOID *Buffer
)
-/*++
-
-Routine Description:
- Io write
-
-Arguments:
-
-Returns:
-
---*/
{
UINTN AlignMask;
PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
@@ -737,6 +1209,30 @@ Returns: }
+/**
+ Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
+ root bridge memory space.
+
+ The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
+ space to another region of PCI root bridge memory space. This is especially useful for video scroll
+ operation on a memory mapped video buffer.
+ The memory operations are carried out exactly as requested. The caller is responsible for satisfying
+ any alignment and memory width restrictions that a PCI root bridge on a platform might require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] DestAddress The destination address of the memory operation. The caller is
+ responsible for aligning the DestAddress if required.
+ @param[in] SrcAddress The source address of the memory operation. The caller is
+ responsible for aligning the SrcAddress if required.
+ @param[in] Count The number of memory operations to perform. Bytes moved is
+ Width size * Count, starting at DestAddress and SrcAddress.
+
+ @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoCopyMem (
@@ -746,16 +1242,6 @@ RootBridgeIoCopyMem ( IN UINT64 SrcAddress,
IN UINTN Count
)
-/*++
-
-Routine Description:
- Memory copy
-
-Arguments:
-
-Returns:
-
---*/
{
EFI_STATUS Status;
BOOLEAN Direction;
@@ -812,6 +1298,29 @@ Returns: return EFI_SUCCESS;
}
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPciRead (
@@ -821,16 +1330,6 @@ RootBridgeIoPciRead ( IN UINTN Count,
IN OUT VOID *Buffer
)
-/*++
-
-Routine Description:
- Pci read
-
-Arguments:
-
-Returns:
-
---*/
{
if (Buffer == NULL) {
@@ -846,6 +1345,29 @@ Returns: return RootBridgeIoPciRW (This, FALSE, Width, Address, Count, Buffer);
}
+/**
+ Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
+
+ The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
+ registers for a PCI controller.
+ The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
+ any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
+ require.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] Address The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoPciWrite (
@@ -855,16 +1377,6 @@ RootBridgeIoPciWrite ( IN UINTN Count,
IN OUT VOID *Buffer
)
-/*++
-
-Routine Description:
- Pci write
-
-Arguments:
-
-Returns:
-
---*/
{
if (Buffer == NULL) {
@@ -880,6 +1392,32 @@ Returns: return RootBridgeIoPciRW (This, TRUE, Width, Address, Count, Buffer);
}
+/**
+ Provides the PCI controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ The Map() function provides the PCI controller specific addresses needed to access system
+ memory. This function is used to map system memory for PCI bus master DMA accesses.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Operation Indicates if the bus master is going to read or write to system memory.
+ @param[in] HostAddress The system memory address to map to the PCI controller.
+ @param[in][out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
+ @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
+ to access the system memory's HostAddress.
+ @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_INVALID_PARAMETER Operation is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
+ @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
+ @retval EFI_INVALID_PARAMETER Mapping is NULL.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoMap (
@@ -890,7 +1428,6 @@ RootBridgeIoMap ( OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
OUT VOID **Mapping
)
-
{
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS PhysicalAddress;
@@ -999,13 +1536,28 @@ RootBridgeIoMap ( return EFI_SUCCESS;
}
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ The Unmap() function completes the Map() operation and releases any corresponding resources.
+ If the operation was an EfiPciOperationBusMasterWrite or
+ EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
+ Any resources used for the mapping are freed.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+ @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
+ @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoUnmap (
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
IN VOID *Mapping
)
-
{
MAP_INFO *MapInfo;
@@ -1041,6 +1593,27 @@ RootBridgeIoUnmap ( return EFI_SUCCESS;
}
+/**
+ Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
+ EfiPciOperationBusMasterCommonBuffer64 mapping.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range. Only
+ the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
+ and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_INVALID_PARAMETER MemoryType is invalid.
+ @retval EFI_INVALID_PARAMETER HostAddress is NULL.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoAllocateBuffer (
@@ -1051,7 +1624,6 @@ RootBridgeIoAllocateBuffer ( OUT VOID **HostAddress,
IN UINT64 Attributes
)
-
{
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS PhysicalAddress;
@@ -1092,6 +1664,20 @@ RootBridgeIoAllocateBuffer ( return EFI_SUCCESS;
}
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+ was not allocated with AllocateBuffer().
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoFreeBuffer (
@@ -1099,25 +1685,34 @@ RootBridgeIoFreeBuffer ( IN UINTN Pages,
OUT VOID *HostAddress
)
-
{
return gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress, Pages);
}
+/**
+ Flushes all PCI posted write transactions from a PCI host bridge to system memory.
+
+ The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
+ memory. Posted write transactions are generated by PCI bus masters when they perform write
+ transactions to target addresses in system memory.
+ This function does not flush posted write transactions from any PCI bridges. A PCI controller
+ specific action must be taken to guarantee that the posted write transactions have been flushed from
+ the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
+ a PCI read transaction from the PCI controller prior to calling Flush().
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+
+ @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
+ bridge to system memory.
+ @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
+ host bridge due to a hardware error.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoFlush (
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
)
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
---*/
{
//
// not supported yet
@@ -1125,6 +1720,26 @@ Returns: return EFI_SUCCESS;
}
+/**
+ Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
+ attributes that a PCI root bridge is currently using.
+
+ The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
+ and the mask of attributes that the PCI root bridge is currently using.
+
+ @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param Supported A pointer to the mask of attributes that this PCI root bridge
+ supports setting with SetAttributes().
+ @param Attributes A pointer to the mask of attributes that this PCI root bridge is
+ currently using.
+
+ @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
+ bridge supports is returned in Supports. If Attributes is
+ not NULL, then the attributes that the PCI root bridge is currently
+ using is returned in Attributes.
+ @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoGetAttributes (
@@ -1132,15 +1747,6 @@ RootBridgeIoGetAttributes ( OUT UINT64 *Supported,
OUT UINT64 *Attributes
)
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
---*/
{
PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
@@ -1164,6 +1770,36 @@ Returns: return EFI_SUCCESS;
}
+/**
+ Sets attributes for a resource range on a PCI root bridge.
+
+ The SetAttributes() function sets the attributes specified in Attributes for the PCI root
+ bridge on the resource range specified by ResourceBase and ResourceLength. Since the
+ granularity of setting these attributes may vary from resource type to resource type, and from
+ platform to platform, the actual resource range and the one passed in by the caller may differ. As a
+ result, this function may set the attributes specified by Attributes on a larger resource range
+ than the caller requested. The actual range is returned in ResourceBase and
+ ResourceLength. The caller is responsible for verifying that the actual range for which the
+ attributes were set is acceptable.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Attributes The mask of attributes to set. If the attribute bit
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
+ MEMORY_DISABLE is set, then the resource range is specified by
+ ResourceBase and ResourceLength. If
+ MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
+ MEMORY_DISABLE are not set, then ResourceBase and
+ ResourceLength are ignored, and may be NULL.
+ @param[in][out] ResourceBase A pointer to the base address of the resource range to be modified
+ by the attributes specified by Attributes.
+ @param[in][out] ResourceLength A pointer to the length of the resource range to be modified by the
+ attributes specified by Attributes.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoSetAttributes (
@@ -1172,15 +1808,6 @@ RootBridgeIoSetAttributes ( IN OUT UINT64 *ResourceBase,
IN OUT UINT64 *ResourceLength
)
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
---*/
{
PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
@@ -1205,21 +1832,35 @@ Returns: return EFI_SUCCESS;
}
+/**
+ Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
+ resource descriptors.
+
+ There are only two resource descriptor types from the ACPI Specification that may be used to
+ describe the current resources allocated to a PCI root bridge. These are the QWORD Address
+ Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
+ QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
+ or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
+ Address Space Descriptors followed by an End Tag.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
+ current configuration of this PCI root bridge. The storage for the
+ ACPI 2.0 resource descriptors is allocated by this function. The
+ caller must treat the return buffer as read-only data, and the buffer
+ must not be freed by the caller.
+
+ @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
+ @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
+ @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+
+**/
EFI_STATUS
EFIAPI
RootBridgeIoConfiguration (
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
OUT VOID **Resources
)
-/*++
-
-Routine Description:
-
-Arguments:
-
-Returns:
-
---*/
{
PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
UINTN Index;
@@ -1241,6 +1882,24 @@ Returns: //
// Internal function
//
+/**
+ Internal help function for read and write PCI configuration space.
+
+ @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ @param[in] Write Switch value for Read or Write.
+ @param[in] Width Signifies the width of the memory operations.
+ @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
+ @param[in] Count The number of PCI configuration operations to perform. Bytes
+ moved is Width size * Count, starting at Address.
+ @param[out] UserBuffer For read operations, the destination buffer to store the results. For
+ write operations, the source buffer to write data from.
+
+ @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+
+**/
EFI_STATUS
RootBridgeIoPciRW (
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
|