diff options
Diffstat (limited to 'Platform/BroxtonPlatformPkg/Common/SampleCode/NetworkPkg/UefiPxeBcDxe/PxeBcImpl.c')
-rw-r--r-- | Platform/BroxtonPlatformPkg/Common/SampleCode/NetworkPkg/UefiPxeBcDxe/PxeBcImpl.c | 2411 |
1 files changed, 2411 insertions, 0 deletions
diff --git a/Platform/BroxtonPlatformPkg/Common/SampleCode/NetworkPkg/UefiPxeBcDxe/PxeBcImpl.c b/Platform/BroxtonPlatformPkg/Common/SampleCode/NetworkPkg/UefiPxeBcDxe/PxeBcImpl.c new file mode 100644 index 0000000000..12e5566a79 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/SampleCode/NetworkPkg/UefiPxeBcDxe/PxeBcImpl.c @@ -0,0 +1,2411 @@ +/** @file
+ This implementation of EFI_PXE_BASE_CODE_PROTOCOL and EFI_LOAD_FILE_PROTOCOL.
+
+ Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "PxeBcImpl.h"
+
+
+/**
+ Enables the use of the PXE Base Code Protocol functions.
+
+ This function enables the use of the PXE Base Code Protocol functions. If the
+ Started field of the EFI_PXE_BASE_CODE_MODE structure is already TRUE, then
+ EFI_ALREADY_STARTED will be returned. If UseIpv6 is TRUE, then IPv6 formatted
+ addresses will be used in this session. If UseIpv6 is FALSE, then IPv4 formatted
+ addresses will be used in this session. If UseIpv6 is TRUE, and the Ipv6Supported
+ field of the EFI_PXE_BASE_CODE_MODE structure is FALSE, then EFI_UNSUPPORTED will
+ be returned. If there is not enough memory or other resources to start the PXE
+ Base Code Protocol, then EFI_OUT_OF_RESOURCES will be returned. Otherwise, the
+ PXE Base Code Protocol will be started.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] UseIpv6 Specifies the type of IP addresses that are to be
+ used during the session that is being started.
+ Set to TRUE for IPv6, and FALSE for IPv4.
+
+ @retval EFI_SUCCESS The PXE Base Code Protocol was started.
+ @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
+ @retval EFI_UNSUPPORTED UseIpv6 is TRUE, but the Ipv6Supported field of the
+ EFI_PXE_BASE_CODE_MODE structure is FALSE.
+ @retval EFI_ALREADY_STARTED The PXE Base Code Protocol is already in the started state.
+ @retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid
+ EFI_PXE_BASE_CODE_PROTOCOL structure.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough memory or other resources to start the
+ PXE Base Code Protocol.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcStart (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN BOOLEAN UseIpv6
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ UINTN Index;
+ EFI_STATUS Status;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+
+ if (Mode->Started) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ //
+ // Detect whether using IPv6 or not, and set it into mode data.
+ //
+ if (UseIpv6 && Mode->Ipv6Available && Mode->Ipv6Supported && Private->Ip6Nic != NULL) {
+ Mode->UsingIpv6 = TRUE;
+ } else if (!UseIpv6 && Private->Ip4Nic != NULL) {
+ Mode->UsingIpv6 = FALSE;
+ } else {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (Mode->UsingIpv6) {
+ AsciiPrint ("\n>>Start PXE over IPv6");
+ //
+ // Configure udp6 instance to receive data.
+ //
+ Status = Private->Udp6Read->Configure (
+ Private->Udp6Read,
+ &Private->Udp6CfgData
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ //
+ // Configure block size for TFTP as a default value to handle all link layers.
+ //
+ Private->BlockSize = (UINTN) (Private->Ip6MaxPacketSize -
+ PXEBC_DEFAULT_UDP_OVERHEAD_SIZE - PXEBC_DEFAULT_TFTP_OVERHEAD_SIZE);
+
+ //
+ // PXE over IPv6 starts here, initialize the fields and list header.
+ //
+ Private->Ip6Policy = PXEBC_IP6_POLICY_MAX;
+ Private->ProxyOffer.Dhcp6.Packet.Offer.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;
+ Private->DhcpAck.Dhcp6.Packet.Ack.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;
+ Private->PxeReply.Dhcp6.Packet.Ack.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;
+
+ for (Index = 0; Index < PXEBC_OFFER_MAX_NUM; Index++) {
+ Private->OfferBuffer[Index].Dhcp6.Packet.Offer.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;
+ }
+
+ //
+ // Create event and set status for token to capture ICMP6 error message.
+ //
+ Private->Icmp6Token.Status = EFI_NOT_READY;
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ PxeBcIcmp6ErrorUpdate,
+ Private,
+ &Private->Icmp6Token.Event
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ //
+ // Set Ip6 policy to Automatic to start the IP6 router discovery.
+ //
+ Status = PxeBcSetIp6Policy (Private);
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+ } else {
+ AsciiPrint ("\n>>Start PXE over IPv4");
+ //
+ // Configure udp4 instance to receive data.
+ //
+ Status = Private->Udp4Read->Configure (
+ Private->Udp4Read,
+ &Private->Udp4CfgData
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ //
+ // Configure block size for TFTP as a default value to handle all link layers.
+ //
+ Private->BlockSize = (UINTN) (Private->Ip4MaxPacketSize -
+ PXEBC_DEFAULT_UDP_OVERHEAD_SIZE - PXEBC_DEFAULT_TFTP_OVERHEAD_SIZE);
+
+ //
+ // PXE over IPv4 starts here, initialize the fields.
+ //
+ Private->ProxyOffer.Dhcp4.Packet.Offer.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;
+ Private->DhcpAck.Dhcp4.Packet.Ack.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;
+ Private->PxeReply.Dhcp4.Packet.Ack.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;
+
+ for (Index = 0; Index < PXEBC_OFFER_MAX_NUM; Index++) {
+ Private->OfferBuffer[Index].Dhcp4.Packet.Offer.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;
+ }
+
+ PxeBcSeedDhcp4Packet (&Private->SeedPacket, Private->Udp4Read);
+
+ //
+ // Create the event for Arp cache update.
+ //
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ PxeBcArpCacheUpdate,
+ Private,
+ &Private->ArpUpdateEvent
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ //
+ // Start a periodic timer by second to update Arp cache.
+ //
+ Status = gBS->SetTimer (
+ Private->ArpUpdateEvent,
+ TimerPeriodic,
+ TICKS_PER_SECOND
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ //
+ // Create event and set status for token to capture ICMP error message.
+ //
+ Private->Icmp6Token.Status = EFI_NOT_READY;
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ PxeBcIcmpErrorUpdate,
+ Private,
+ &Private->IcmpToken.Event
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ //
+ //DHCP4 service allows only one of its children to be configured in
+ //the active state, If the DHCP4 D.O.R.A started by IP4 auto
+ //configuration and has not been completed, the Dhcp4 state machine
+ //will not be in the right state for the PXE to start a new round D.O.R.A.
+ //so we need to switch it's policy to static.
+ //
+ Status = PxeBcSetIp4Policy (Private);
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+ }
+
+ //
+ // If PcdTftpBlockSize is set to non-zero, override the default value.
+ //
+ if (PcdGet64 (PcdTftpBlockSize) != 0) {
+ Private->BlockSize = (UINTN) PcdGet64 (PcdTftpBlockSize);
+ }
+
+ //
+ // Create event for UdpRead/UdpWrite timeout since they are both blocking API.
+ //
+ Status = gBS->CreateEvent (
+ EVT_TIMER,
+ TPL_CALLBACK,
+ NULL,
+ NULL,
+ &Private->UdpTimeOutEvent
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR;
+ }
+
+ Private->IsAddressOk = FALSE;
+ Mode->Started = TRUE;
+
+ return EFI_SUCCESS;
+
+ON_ERROR:
+ if (Mode->UsingIpv6) {
+ if (Private->Icmp6Token.Event != NULL) {
+ gBS->CloseEvent (Private->Icmp6Token.Event);
+ Private->Icmp6Token.Event = NULL;
+ }
+ Private->Udp6Read->Configure (Private->Udp6Read, NULL);
+ Private->Ip6->Configure (Private->Ip6, NULL);
+ } else {
+ if (Private->ArpUpdateEvent != NULL) {
+ gBS->CloseEvent (Private->ArpUpdateEvent);
+ Private->ArpUpdateEvent = NULL;
+ }
+ if (Private->IcmpToken.Event != NULL) {
+ gBS->CloseEvent (Private->IcmpToken.Event);
+ Private->IcmpToken.Event = NULL;
+ }
+ Private->Udp4Read->Configure (Private->Udp4Read, NULL);
+ Private->Ip4->Configure (Private->Ip4, NULL);
+ }
+ return Status;
+}
+
+
+/**
+ Disable the use of the PXE Base Code Protocol functions.
+
+ This function stops all activity on the network device. All the resources allocated
+ in Start() are released, the Started field of the EFI_PXE_BASE_CODE_MODE structure is
+ set to FALSE, and EFI_SUCCESS is returned. If the Started field of the EFI_PXE_BASE_CODE_MODE
+ structure is already FALSE, then EFI_NOT_STARTED will be returned.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The PXE Base Code Protocol was stopped.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is already in the stopped state.
+ @retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid
+ EFI_PXE_BASE_CODE_PROTOCOL structure.
+ @retval Others
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcStop (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ BOOLEAN Ipv6Supported;
+ BOOLEAN Ipv6Available;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+ Ipv6Supported = Mode->Ipv6Supported;
+ Ipv6Available = Mode->Ipv6Available;
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (Mode->UsingIpv6) {
+ //
+ // Configure all the instances for IPv6 as NULL.
+ //
+ ZeroMem (&Private->Udp6CfgData.StationAddress, sizeof (EFI_IPv6_ADDRESS));
+ ZeroMem (&Private->Ip6CfgData.StationAddress, sizeof (EFI_IPv6_ADDRESS));
+ Private->Dhcp6->Stop (Private->Dhcp6);
+ Private->Dhcp6->Configure (Private->Dhcp6, NULL);
+ Private->Udp6Write->Configure (Private->Udp6Write, NULL);
+ Private->Udp6Read->Groups (Private->Udp6Read, FALSE, NULL);
+ Private->Udp6Read->Configure (Private->Udp6Read, NULL);
+ Private->Ip6->Cancel (Private->Ip6, &Private->Icmp6Token);
+ Private->Ip6->Configure (Private->Ip6, NULL);
+ PxeBcUnregisterIp6Address (Private);
+ if (Private->Icmp6Token.Event != NULL) {
+ gBS->CloseEvent (Private->Icmp6Token.Event);
+ Private->Icmp6Token.Event = NULL;
+ }
+ if (Private->Dhcp6Request != NULL) {
+ FreePool (Private->Dhcp6Request);
+ Private->Dhcp6Request = NULL;
+ }
+ if (Private->BootFileName != NULL) {
+ FreePool (Private->BootFileName);
+ Private->BootFileName = NULL;
+ }
+ } else {
+ //
+ // Configure all the instances for IPv4 as NULL.
+ //
+ ZeroMem (&Private->Udp4CfgData.StationAddress, sizeof (EFI_IPv4_ADDRESS));
+ ZeroMem (&Private->Udp4CfgData.SubnetMask, sizeof (EFI_IPv4_ADDRESS));
+ ZeroMem (&Private->Ip4CfgData.StationAddress, sizeof (EFI_IPv4_ADDRESS));
+ ZeroMem (&Private->Ip4CfgData.SubnetMask, sizeof (EFI_IPv4_ADDRESS));
+ Private->Dhcp4->Stop (Private->Dhcp4);
+ Private->Dhcp4->Configure (Private->Dhcp4, NULL);
+ Private->Udp4Write->Configure (Private->Udp4Write, NULL);
+ Private->Udp4Read->Groups (Private->Udp4Read, FALSE, NULL);
+ Private->Udp4Read->Configure (Private->Udp4Read, NULL);
+ Private->Ip4->Cancel (Private->Ip4, &Private->IcmpToken);
+ Private->Ip4->Configure (Private->Ip4, NULL);
+ if (Private->ArpUpdateEvent != NULL) {
+ gBS->CloseEvent (Private->ArpUpdateEvent);
+ Private->ArpUpdateEvent = NULL;
+ }
+ if (Private->IcmpToken.Event != NULL) {
+ gBS->CloseEvent (Private->IcmpToken.Event);
+ Private->IcmpToken.Event = NULL;
+ }
+ Private->BootFileName = NULL;
+ }
+
+ gBS->CloseEvent (Private->UdpTimeOutEvent);
+ Private->CurSrcPort = 0;
+ Private->BootFileSize = 0;
+ Private->SolicitTimes = 0;
+ Private->ElapsedTime = 0;
+ ZeroMem (&Private->StationIp, sizeof (EFI_IP_ADDRESS));
+ ZeroMem (&Private->SubnetMask, sizeof (EFI_IP_ADDRESS));
+ ZeroMem (&Private->GatewayIp, sizeof (EFI_IP_ADDRESS));
+ ZeroMem (&Private->ServerIp, sizeof (EFI_IP_ADDRESS));
+
+ //
+ // Reset the mode data.
+ //
+ ZeroMem (Mode, sizeof (EFI_PXE_BASE_CODE_MODE));
+ Mode->Ipv6Available = Ipv6Available;
+ Mode->Ipv6Supported = Ipv6Supported;
+ Mode->AutoArp = TRUE;
+ Mode->TTL = DEFAULT_TTL;
+ Mode->ToS = DEFAULT_ToS;
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Attempts to complete a DHCPv4 D.O.R.A. (discover / offer / request / acknowledge) or DHCPv6
+ S.A.R.R (solicit / advertise / request / reply) sequence.
+
+ If SortOffers is TRUE, then the cached DHCP offer packets will be sorted before
+ they are tried. If SortOffers is FALSE, then the cached DHCP offer packets will
+ be tried in the order in which they are received. Please see the Preboot Execution
+ Environment (PXE) Specification and Unified Extensible Firmware Interface (UEFI)
+ Specification for additional details on the implementation of DHCP.
+ If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,
+ then the DHCP sequence will be stopped and EFI_ABORTED will be returned.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] SortOffers TRUE if the offers received should be sorted. Set to FALSE to
+ try the offers in the order that they are received.
+
+ @retval EFI_SUCCESS Valid DHCP has completed.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid
+ EFI_PXE_BASE_CODE_PROTOCOL structure.
+ @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough memory to complete the DHCP Protocol.
+ @retval EFI_ABORTED The callback function aborted the DHCP Protocol.
+ @retval EFI_TIMEOUT The DHCP Protocol timed out.
+ @retval EFI_ICMP_ERROR An ICMP error packet was received during the DHCP session.
+ @retval EFI_NO_RESPONSE Valid PXE offer was not received.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcDhcp (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN BOOLEAN SortOffers
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_STATUS Status;
+ EFI_PXE_BASE_CODE_IP_FILTER IpFilter;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = EFI_SUCCESS;
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+ Mode->IcmpErrorReceived = FALSE;
+ Private->Function = EFI_PXE_BASE_CODE_FUNCTION_DHCP;
+ Private->IsOfferSorted = SortOffers;
+ Private->SolicitTimes = 0;
+ Private->ElapsedTime = 0;
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (Mode->UsingIpv6) {
+
+ //
+ // Stop Udp6Read instance
+ //
+ Private->Udp6Read->Configure (Private->Udp6Read, NULL);
+
+ //
+ // Start S.A.R.R. process to get a IPv6 address and other boot information.
+ //
+ Status = PxeBcDhcp6Sarr (Private, Private->Dhcp6);
+ } else {
+
+ //
+ // Stop Udp4Read instance
+ //
+ Private->Udp4Read->Configure (Private->Udp4Read, NULL);
+
+ //
+ // Start D.O.R.A. process to get a IPv4 address and other boot information.
+ //
+ Status = PxeBcDhcp4Dora (Private, Private->Dhcp4);
+ }
+
+ //
+ // Reconfigure the UDP instance with the default configuration.
+ //
+ if (Mode->UsingIpv6) {
+ Private->Udp6Read->Configure (Private->Udp6Read, &Private->Udp6CfgData);
+ } else {
+ Private->Udp4Read->Configure (Private->Udp4Read, &Private->Udp4CfgData);
+ }
+ //
+ // Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP
+ // receive filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.
+ //
+ ZeroMem(&IpFilter, sizeof (EFI_PXE_BASE_CODE_IP_FILTER));
+ IpFilter.Filters = EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP;
+ This->SetIpFilter (This, &IpFilter);
+
+ return Status;
+}
+
+
+/**
+ Attempts to complete the PXE Boot Server and/or boot image discovery sequence.
+
+ This function attempts to complete the PXE Boot Server and/or boot image discovery
+ sequence. If this sequence is completed, then EFI_SUCCESS is returned, and the
+ PxeDiscoverValid, PxeDiscover, PxeReplyReceived, and PxeReply fields of the
+ EFI_PXE_BASE_CODE_MODE structure are filled in. If UseBis is TRUE, then the
+ PxeBisReplyReceived and PxeBisReply fields of the EFI_PXE_BASE_CODE_MODE structure
+ will also be filled in. If UseBis is FALSE, then PxeBisReplyValid will be set to FALSE.
+ In the structure referenced by parameter Info, the PXE Boot Server list, SrvList[],
+ has two uses: It is the Boot Server IP address list used for unicast discovery
+ (if the UseUCast field is TRUE), and it is the list used for Boot Server verification
+ (if the MustUseList field is TRUE). Also, if the MustUseList field in that structure
+ is TRUE and the AcceptAnyResponse field in the SrvList[] array is TRUE, any Boot
+ Server reply of that type will be accepted. If the AcceptAnyResponse field is
+ FALSE, only responses from Boot Servers with matching IP addresses will be accepted.
+ This function can take at least 10 seconds to timeout and return control to the
+ caller. If the Discovery sequence does not complete, then EFI_TIMEOUT will be
+ returned. Please see the Preboot Execution Environment (PXE) Specification for
+ additional details on the implementation of the Discovery sequence.
+ If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,
+ then the Discovery sequence is stopped and EFI_ABORTED will be returned.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] Type The type of bootstrap to perform.
+ @param[in] Layer Pointer to the boot server layer number to discover, which must be
+ PXE_BOOT_LAYER_INITIAL when a new server type is being
+ discovered.
+ @param[in] UseBis TRUE if Boot Integrity Services are to be used. FALSE otherwise.
+ @param[in] Info Pointer to a data structure that contains additional information
+ on the type of discovery operation that is to be performed.
+ It is optional.
+
+ @retval EFI_SUCCESS The Discovery sequence has been completed.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate enough memory to complete Discovery.
+ @retval EFI_ABORTED The callback function aborted the Discovery sequence.
+ @retval EFI_TIMEOUT The Discovery sequence timed out.
+ @retval EFI_ICMP_ERROR An ICMP error packet was received during the PXE discovery
+ session.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcDiscover (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN UINT16 Type,
+ IN UINT16 *Layer,
+ IN BOOLEAN UseBis,
+ IN EFI_PXE_BASE_CODE_DISCOVER_INFO *Info OPTIONAL
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_PXE_BASE_CODE_DISCOVER_INFO DefaultInfo;
+ EFI_PXE_BASE_CODE_SRVLIST *SrvList;
+ PXEBC_BOOT_SVR_ENTRY *BootSvrEntry;
+ UINT16 Index;
+ EFI_STATUS Status;
+ EFI_PXE_BASE_CODE_IP_FILTER IpFilter;
+ EFI_PXE_BASE_CODE_DISCOVER_INFO *NewCreatedInfo;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+ Mode->IcmpErrorReceived = FALSE;
+ BootSvrEntry = NULL;
+ SrvList = NULL;
+ Status = EFI_DEVICE_ERROR;
+ Private->Function = EFI_PXE_BASE_CODE_FUNCTION_DISCOVER;
+ NewCreatedInfo = NULL;
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ //
+ // Station address should be ready before do discover.
+ //
+ if (!Private->IsAddressOk) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Mode->UsingIpv6) {
+
+ //
+ // Stop Udp6Read instance
+ //
+ Private->Udp6Read->Configure (Private->Udp6Read, NULL);
+ } else {
+
+ //
+ // Stop Udp4Read instance
+ //
+ Private->Udp4Read->Configure (Private->Udp4Read, NULL);
+ }
+
+ //
+ // There are 3 methods to get the information for discover.
+ //
+ ZeroMem (&DefaultInfo, sizeof (EFI_PXE_BASE_CODE_DISCOVER_INFO));
+ if (*Layer != EFI_PXE_BASE_CODE_BOOT_LAYER_INITIAL) {
+ //
+ // 1. Take the previous setting as the discover info.
+ //
+ if (!Mode->PxeDiscoverValid ||
+ !Mode->PxeReplyReceived ||
+ (!Mode->PxeBisReplyReceived && UseBis)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Info = &DefaultInfo;
+ Info->IpCnt = 1;
+ Info->UseUCast = TRUE;
+ SrvList = Info->SrvList;
+ SrvList[0].Type = Type;
+ SrvList[0].AcceptAnyResponse = FALSE;
+
+ CopyMem (&SrvList->IpAddr, &Private->ServerIp, sizeof (EFI_IP_ADDRESS));
+
+ } else if (Info == NULL) {
+ //
+ // 2. Extract the discover information from the cached packets if unspecified.
+ //
+ NewCreatedInfo = &DefaultInfo;
+ Status = PxeBcExtractDiscoverInfo (Private, Type, &NewCreatedInfo, &BootSvrEntry, &SrvList);
+ if (EFI_ERROR (Status)) {
+ goto ON_EXIT;
+ }
+ ASSERT (NewCreatedInfo != NULL);
+ Info = NewCreatedInfo;
+ } else {
+ //
+ // 3. Take the pass-in information as the discover info, and validate the server list.
+ //
+ SrvList = Info->SrvList;
+
+ if (!SrvList[0].AcceptAnyResponse) {
+ for (Index = 1; Index < Info->IpCnt; Index++) {
+ if (SrvList[Index].AcceptAnyResponse) {
+ break;
+ }
+ }
+ if (Index != Info->IpCnt) {
+ //
+ // It's invalid if the first server doesn't accecpt any response
+ // but any of the other servers does accept any response.
+ //
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+ }
+ }
+
+ //
+ // Info and BootSvrEntry/SrvList are all ready by now, so execute discover by UniCast/BroadCast/MultiCast.
+ //
+ if ((!Info->UseUCast && !Info->UseBCast && !Info->UseMCast) ||
+ (Info->MustUseList && Info->IpCnt == 0)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Private->IsDoDiscover = TRUE;
+
+ if (Info->UseMCast) {
+ //
+ // Do discover by multicast.
+ //
+ Status = PxeBcDiscoverBootServer (
+ Private,
+ Type,
+ Layer,
+ UseBis,
+ &Info->ServerMCastIp,
+ Info->IpCnt,
+ SrvList
+ );
+
+ } else if (Info->UseBCast) {
+ //
+ // Do discover by broadcast, but only valid for IPv4.
+ //
+ ASSERT (!Mode->UsingIpv6);
+ Status = PxeBcDiscoverBootServer (
+ Private,
+ Type,
+ Layer,
+ UseBis,
+ NULL,
+ Info->IpCnt,
+ SrvList
+ );
+
+ } else if (Info->UseUCast) {
+ //
+ // Do discover by unicast.
+ //
+ for (Index = 0; Index < Info->IpCnt; Index++) {
+ if (BootSvrEntry == NULL) {
+ CopyMem (&Private->ServerIp, &SrvList[Index].IpAddr, sizeof (EFI_IP_ADDRESS));
+ } else {
+ ASSERT (!Mode->UsingIpv6);
+ ZeroMem (&Private->ServerIp, sizeof (EFI_IP_ADDRESS));
+ CopyMem (&Private->ServerIp, &BootSvrEntry->IpAddr[Index], sizeof (EFI_IPv4_ADDRESS));
+ }
+
+ Status = PxeBcDiscoverBootServer (
+ Private,
+ Type,
+ Layer,
+ UseBis,
+ &Private->ServerIp,
+ Info->IpCnt,
+ SrvList
+ );
+ }
+ }
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // Parse the cached PXE reply packet, and store it into mode data if valid.
+ //
+ if (Mode->UsingIpv6) {
+ Status = PxeBcParseDhcp6Packet (&Private->PxeReply.Dhcp6);
+ if (!EFI_ERROR (Status)) {
+ CopyMem (
+ &Mode->PxeReply.Dhcpv6,
+ &Private->PxeReply.Dhcp6.Packet.Ack.Dhcp6,
+ Private->PxeReply.Dhcp6.Packet.Ack.Length
+ );
+ Mode->PxeReplyReceived = TRUE;
+ Mode->PxeDiscoverValid = TRUE;
+ }
+ } else {
+ Status = PxeBcParseDhcp4Packet (&Private->PxeReply.Dhcp4);
+ if (!EFI_ERROR (Status)) {
+ CopyMem (
+ &Mode->PxeReply.Dhcpv4,
+ &Private->PxeReply.Dhcp4.Packet.Ack.Dhcp4,
+ Private->PxeReply.Dhcp4.Packet.Ack.Length
+ );
+ Mode->PxeReplyReceived = TRUE;
+ Mode->PxeDiscoverValid = TRUE;
+ }
+ }
+ }
+
+ON_EXIT:
+
+ if (NewCreatedInfo != NULL && NewCreatedInfo != &DefaultInfo) {
+ FreePool (NewCreatedInfo);
+ }
+
+ if (Mode->UsingIpv6) {
+ Private->Udp6Read->Configure (Private->Udp6Read, &Private->Udp6CfgData);
+ } else {
+ Private->Udp4Read->Configure (Private->Udp4Read, &Private->Udp4CfgData);
+ }
+
+ //
+ // Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP
+ // receive filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.
+ //
+ ZeroMem(&IpFilter, sizeof (EFI_PXE_BASE_CODE_IP_FILTER));
+ IpFilter.Filters = EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP;
+ This->SetIpFilter (This, &IpFilter);
+
+ return Status;
+}
+
+
+/**
+ Used to perform TFTP and MTFTP services.
+
+ This function is used to perform TFTP and MTFTP services. This includes the
+ TFTP operations to get the size of a file, read a directory, read a file, and
+ write a file. It also includes the MTFTP operations to get the size of a file,
+ read a directory, and read a file. The type of operation is specified by Operation.
+ If the callback function that is invoked during the TFTP/MTFTP operation does
+ not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE, then EFI_ABORTED will
+ be returned.
+ For read operations, the return data will be placed in the buffer specified by
+ BufferPtr. If BufferSize is too small to contain the entire downloaded file,
+ then EFI_BUFFER_TOO_SMALL will be returned and BufferSize will be set to zero,
+ or the size of the requested file. (NOTE: the size of the requested file is only returned
+ if the TFTP server supports TFTP options). If BufferSize is large enough for the
+ read operation, then BufferSize will be set to the size of the downloaded file,
+ and EFI_SUCCESS will be returned. Applications using the PxeBc.Mtftp() services
+ should use the get-file-size operations to determine the size of the downloaded
+ file prior to using the read-file operations-especially when downloading large
+ (greater than 64 MB) files-instead of making two calls to the read-file operation.
+ Following this recommendation will save time if the file is larger than expected
+ and the TFTP server does not support TFTP option extensions. Without TFTP option
+ extension support, the client must download the entire file, counting and discarding
+ the received packets, to determine the file size.
+ For write operations, the data to be sent is in the buffer specified by BufferPtr.
+ BufferSize specifies the number of bytes to send. If the write operation completes
+ successfully, then EFI_SUCCESS will be returned.
+ For TFTP "get file size" operations, the size of the requested file or directory
+ is returned in BufferSize, and EFI_SUCCESS will be returned. If the TFTP server
+ does not support options, the file will be downloaded into a bit bucket and the
+ length of the downloaded file will be returned. For MTFTP "get file size" operations,
+ if the MTFTP server does not support the "get file size" option, EFI_UNSUPPORTED
+ will be returned.
+ This function can take up to 10 seconds to timeout and return control to the caller.
+ If the TFTP sequence does not complete, EFI_TIMEOUT will be returned.
+ If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,
+ then the TFTP sequence is stopped and EFI_ABORTED will be returned.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] Operation The type of operation to perform.
+ @param[in, out] BufferPtr A pointer to the data buffer.
+ @param[in] Overwrite Only used on write file operations. TRUE if a file on a remote
+ server can be overwritten.
+ @param[in, out] BufferSize For get-file-size operations, *BufferSize returns the size of the
+ requested file.
+ @param[in] BlockSize The requested block size to be used during a TFTP transfer.
+ @param[in] ServerIp The TFTP / MTFTP server IP address.
+ @param[in] Filename A Null-terminated ASCII string that specifies a directory name
+ or a file name.
+ @param[in] Info Pointer to the MTFTP information.
+ @param[in] DontUseBuffer Set to FALSE for normal TFTP and MTFTP read file operation.
+
+ @retval EFI_SUCCESS The TFTP/MTFTP operation was completed.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
+ @retval EFI_BUFFER_TOO_SMALL The buffer is not large enough to complete the read operation.
+ @retval EFI_ABORTED The callback function aborted the TFTP/MTFTP operation.
+ @retval EFI_TIMEOUT The TFTP/MTFTP operation timed out.
+ @retval EFI_ICMP_ERROR An ICMP error packet was received during the MTFTP session.
+ @retval EFI_TFTP_ERROR A TFTP error packet was received during the MTFTP session.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcMtftp (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN EFI_PXE_BASE_CODE_TFTP_OPCODE Operation,
+ IN OUT VOID *BufferPtr OPTIONAL,
+ IN BOOLEAN Overwrite,
+ IN OUT UINT64 *BufferSize,
+ IN UINTN *BlockSize OPTIONAL,
+ IN EFI_IP_ADDRESS *ServerIp,
+ IN UINT8 *Filename,
+ IN EFI_PXE_BASE_CODE_MTFTP_INFO *Info OPTIONAL,
+ IN BOOLEAN DontUseBuffer
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_MTFTP4_CONFIG_DATA Mtftp4Config;
+ EFI_MTFTP6_CONFIG_DATA Mtftp6Config;
+ VOID *Config;
+ EFI_STATUS Status;
+ EFI_PXE_BASE_CODE_IP_FILTER IpFilter;
+
+
+ if ((This == NULL) ||
+ (Filename == NULL) ||
+ (BufferSize == NULL) ||
+ (ServerIp == NULL) ||
+ ((BufferPtr == NULL) && DontUseBuffer) ||
+ ((BlockSize != NULL) && (*BlockSize < PXE_MTFTP_DEFAULT_BLOCK_SIZE)) ||
+ (!NetIp4IsUnicast (NTOHL (ServerIp->Addr[0]), 0) && !NetIp6IsValidUnicast (&ServerIp->v6))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Config = NULL;
+ Status = EFI_DEVICE_ERROR;
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+
+ if (Mode->UsingIpv6) {
+ //
+ // Set configuration data for Mtftp6 instance.
+ //
+ ZeroMem (&Mtftp6Config, sizeof (EFI_MTFTP6_CONFIG_DATA));
+ Config = &Mtftp6Config;
+ Mtftp6Config.TimeoutValue = PXEBC_MTFTP_TIMEOUT;
+ Mtftp6Config.TryCount = PXEBC_MTFTP_RETRIES;
+ CopyMem (&Mtftp6Config.StationIp, &Private->StationIp.v6, sizeof (EFI_IPv6_ADDRESS));
+ CopyMem (&Mtftp6Config.ServerIp, &ServerIp->v6, sizeof (EFI_IPv6_ADDRESS));
+ //
+ // Stop Udp6Read instance
+ //
+ Private->Udp6Read->Configure (Private->Udp6Read, NULL);
+ } else {
+ //
+ // Set configuration data for Mtftp4 instance.
+ //
+ ZeroMem (&Mtftp4Config, sizeof (EFI_MTFTP4_CONFIG_DATA));
+ Config = &Mtftp4Config;
+ Mtftp4Config.UseDefaultSetting = FALSE;
+ Mtftp4Config.TimeoutValue = PXEBC_MTFTP_TIMEOUT;
+ Mtftp4Config.TryCount = PXEBC_MTFTP_RETRIES;
+ CopyMem (&Mtftp4Config.StationIp, &Private->StationIp.v4, sizeof (EFI_IPv4_ADDRESS));
+ CopyMem (&Mtftp4Config.SubnetMask, &Private->SubnetMask.v4, sizeof (EFI_IPv4_ADDRESS));
+ CopyMem (&Mtftp4Config.GatewayIp, &Private->GatewayIp.v4, sizeof (EFI_IPv4_ADDRESS));
+ CopyMem (&Mtftp4Config.ServerIp, &ServerIp->v4, sizeof (EFI_IPv4_ADDRESS));
+ //
+ // Stop Udp4Read instance
+ //
+ Private->Udp4Read->Configure (Private->Udp4Read, NULL);
+ }
+
+ Mode->TftpErrorReceived = FALSE;
+ Mode->IcmpErrorReceived = FALSE;
+
+ switch (Operation) {
+
+ case EFI_PXE_BASE_CODE_TFTP_GET_FILE_SIZE:
+ //
+ // Send TFTP request to get file size.
+ //
+ Status = PxeBcTftpGetFileSize (
+ Private,
+ Config,
+ Filename,
+ BlockSize,
+ BufferSize
+ );
+
+ break;
+
+ case EFI_PXE_BASE_CODE_TFTP_READ_FILE:
+ //
+ // Send TFTP request to read file.
+ //
+ Status = PxeBcTftpReadFile (
+ Private,
+ Config,
+ Filename,
+ BlockSize,
+ BufferPtr,
+ BufferSize,
+ DontUseBuffer
+ );
+
+ break;
+
+ case EFI_PXE_BASE_CODE_TFTP_WRITE_FILE:
+ //
+ // Send TFTP request to write file.
+ //
+ Status = PxeBcTftpWriteFile (
+ Private,
+ Config,
+ Filename,
+ Overwrite,
+ BlockSize,
+ BufferPtr,
+ BufferSize
+ );
+
+ break;
+
+ case EFI_PXE_BASE_CODE_TFTP_READ_DIRECTORY:
+ //
+ // Send TFTP request to read directory.
+ //
+ Status = PxeBcTftpReadDirectory (
+ Private,
+ Config,
+ Filename,
+ BlockSize,
+ BufferPtr,
+ BufferSize,
+ DontUseBuffer
+ );
+
+ break;
+
+ case EFI_PXE_BASE_CODE_MTFTP_GET_FILE_SIZE:
+ case EFI_PXE_BASE_CODE_MTFTP_READ_FILE:
+ case EFI_PXE_BASE_CODE_MTFTP_READ_DIRECTORY:
+ Status = EFI_UNSUPPORTED;
+
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+
+ break;
+ }
+
+ if (Status == EFI_ICMP_ERROR) {
+ Mode->IcmpErrorReceived = TRUE;
+ }
+
+ //
+ // Reconfigure the UDP instance with the default configuration.
+ //
+ if (Mode->UsingIpv6) {
+ Private->Udp6Read->Configure (Private->Udp6Read, &Private->Udp6CfgData);
+ } else {
+ Private->Udp4Read->Configure (Private->Udp4Read, &Private->Udp4CfgData);
+ }
+ //
+ // Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP
+ // receive filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.
+ //
+ ZeroMem(&IpFilter, sizeof (EFI_PXE_BASE_CODE_IP_FILTER));
+ IpFilter.Filters = EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP;
+ This->SetIpFilter (This, &IpFilter);
+
+ return Status;
+}
+
+
+/**
+ Writes a UDP packet to the network interface.
+
+ This function writes a UDP packet specified by the (optional HeaderPtr and)
+ BufferPtr parameters to the network interface. The UDP header is automatically
+ built by this routine. It uses the parameters OpFlags, DestIp, DestPort, GatewayIp,
+ SrcIp, and SrcPort to build this header. If the packet is successfully built and
+ transmitted through the network interface, then EFI_SUCCESS will be returned.
+ If a timeout occurs during the transmission of the packet, then EFI_TIMEOUT will
+ be returned. If an ICMP error occurs during the transmission of the packet, then
+ the IcmpErrorReceived field is set to TRUE, the IcmpError field is filled in and
+ EFI_ICMP_ERROR will be returned. If the Callback Protocol does not return
+ EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE, then EFI_ABORTED will be returned.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] OpFlags The UDP operation flags.
+ @param[in] DestIp The destination IP address.
+ @param[in] DestPort The destination UDP port number.
+ @param[in] GatewayIp The gateway IP address.
+ @param[in] SrcIp The source IP address.
+ @param[in, out] SrcPort The source UDP port number.
+ @param[in] HeaderSize An optional field which may be set to the length of a header
+ at HeaderPtr to be prefixed to the data at BufferPtr.
+ @param[in] HeaderPtr If HeaderSize is not NULL, a pointer to a header to be
+ prefixed to the data at BufferPtr.
+ @param[in] BufferSize A pointer to the size of the data at BufferPtr.
+ @param[in] BufferPtr A pointer to the data to be written.
+
+ @retval EFI_SUCCESS The UDP Write operation completed.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_BAD_BUFFER_SIZE The buffer is too long to be transmitted.
+ @retval EFI_ABORTED The callback function aborted the UDP Write operation.
+ @retval EFI_TIMEOUT The UDP Write operation timed out.
+ @retval EFI_ICMP_ERROR An ICMP error packet was received during the UDP write session.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcUdpWrite (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN UINT16 OpFlags,
+ IN EFI_IP_ADDRESS *DestIp,
+ IN EFI_PXE_BASE_CODE_UDP_PORT *DestPort,
+ IN EFI_IP_ADDRESS *GatewayIp OPTIONAL,
+ IN EFI_IP_ADDRESS *SrcIp OPTIONAL,
+ IN OUT EFI_PXE_BASE_CODE_UDP_PORT *SrcPort OPTIONAL,
+ IN UINTN *HeaderSize OPTIONAL,
+ IN VOID *HeaderPtr OPTIONAL,
+ IN UINTN *BufferSize,
+ IN VOID *BufferPtr
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_UDP4_SESSION_DATA Udp4Session;
+ EFI_UDP6_SESSION_DATA Udp6Session;
+ EFI_STATUS Status;
+ BOOLEAN DoNotFragment;
+
+ if (This == NULL || DestIp == NULL || DestPort == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+
+ if ((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_MAY_FRAGMENT) != 0) {
+ DoNotFragment = FALSE;
+ } else {
+ DoNotFragment = TRUE;
+ }
+
+ if (!Mode->UsingIpv6 && GatewayIp != NULL && !NetIp4IsUnicast (NTOHL (GatewayIp->Addr[0]), 0)) {
+ //
+ // Gateway is provided but it's not a unicast IPv4 address, while it will be ignored for IPv6.
+ //
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (HeaderSize != NULL && (*HeaderSize == 0 || HeaderPtr == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (BufferSize == NULL || (*BufferSize != 0 && BufferPtr == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (!Private->IsAddressOk && SrcIp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Private->CurSrcPort == 0 ||
+ (SrcPort != NULL && *SrcPort != Private->CurSrcPort)) {
+ //
+ // Reconfigure UDPv4/UDPv6 for UdpWrite if the source port changed.
+ //
+ if (SrcPort != NULL) {
+ Private->CurSrcPort = *SrcPort;
+ }
+ }
+
+ if (Mode->UsingIpv6) {
+ Status = PxeBcConfigUdp6Write (
+ Private->Udp6Write,
+ &Private->StationIp.v6,
+ &Private->CurSrcPort
+ );
+ } else {
+ //
+ // Configure the UDPv4 instance with gateway information from DHCP server as default.
+ //
+ Status = PxeBcConfigUdp4Write (
+ Private->Udp4Write,
+ &Private->StationIp.v4,
+ &Private->SubnetMask.v4,
+ &Private->GatewayIp.v4,
+ &Private->CurSrcPort,
+ DoNotFragment
+ );
+ }
+
+ if (EFI_ERROR (Status)) {
+ Private->CurSrcPort = 0;
+ return EFI_INVALID_PARAMETER;
+ } else if (SrcPort != NULL) {
+ *SrcPort = Private->CurSrcPort;
+ }
+
+ //
+ // Start a timer as timeout event for this blocking API.
+ //
+ gBS->SetTimer (Private->UdpTimeOutEvent, TimerRelative, PXEBC_UDP_TIMEOUT);
+
+ if (Mode->UsingIpv6) {
+ //
+ // Construct UDPv6 session data.
+ //
+ ZeroMem (&Udp6Session, sizeof (EFI_UDP6_SESSION_DATA));
+ CopyMem (&Udp6Session.DestinationAddress, DestIp, sizeof (EFI_IPv6_ADDRESS));
+ Udp6Session.DestinationPort = *DestPort;
+ if (SrcIp != NULL) {
+ CopyMem (&Udp6Session.SourceAddress, SrcIp, sizeof (EFI_IPv6_ADDRESS));
+ }
+ if (SrcPort != NULL) {
+ Udp6Session.SourcePort = *SrcPort;
+ }
+
+ Status = PxeBcUdp6Write (
+ Private->Udp6Write,
+ &Udp6Session,
+ Private->UdpTimeOutEvent,
+ HeaderSize,
+ HeaderPtr,
+ BufferSize,
+ BufferPtr
+ );
+ } else {
+ //
+ // Construct UDPv4 session data.
+ //
+ ZeroMem (&Udp4Session, sizeof (EFI_UDP4_SESSION_DATA));
+ CopyMem (&Udp4Session.DestinationAddress, DestIp, sizeof (EFI_IPv4_ADDRESS));
+ Udp4Session.DestinationPort = *DestPort;
+ if (SrcIp != NULL) {
+ CopyMem (&Udp4Session.SourceAddress, SrcIp, sizeof (EFI_IPv4_ADDRESS));
+ }
+ if (SrcPort != NULL) {
+ Udp4Session.SourcePort = *SrcPort;
+ }
+ //
+ // Override the gateway information if user specified.
+ //
+ Status = PxeBcUdp4Write (
+ Private->Udp4Write,
+ &Udp4Session,
+ Private->UdpTimeOutEvent,
+ (EFI_IPv4_ADDRESS *) GatewayIp,
+ HeaderSize,
+ HeaderPtr,
+ BufferSize,
+ BufferPtr
+ );
+ }
+
+ gBS->SetTimer (Private->UdpTimeOutEvent, TimerCancel, 0);
+
+
+ //
+ // Reset the UdpWrite instance.
+ //
+ if (Mode->UsingIpv6) {
+ Private->Udp6Write->Configure (Private->Udp6Write, NULL);
+ } else {
+ Private->Udp4Write->Configure (Private->Udp4Write, NULL);
+ }
+
+ return Status;
+}
+
+
+/**
+ Reads a UDP packet from the network interface.
++
+ This function reads a UDP packet from a network interface. The data contents
+ are returned in (the optional HeaderPtr and) BufferPtr, and the size of the
+ buffer received is returned in BufferSize . If the input BufferSize is smaller
+ than the UDP packet received (less optional HeaderSize), it will be set to the
+ required size, and EFI_BUFFER_TOO_SMALL will be returned. In this case, the
+ contents of BufferPtr are undefined, and the packet is lost. If a UDP packet is
+ successfully received, then EFI_SUCCESS will be returned, and the information
+ from the UDP header will be returned in DestIp, DestPort, SrcIp, and SrcPort if
+ they are not NULL. Depending on the values of OpFlags and the DestIp, DestPort,
+ SrcIp, and SrcPort input values, different types of UDP packet receive filtering
+ will be performed. The following tables summarize these receive filter operations.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] OpFlags The UDP operation flags.
+ @param[in, out] DestIp The destination IP address.
+ @param[in, out] DestPort The destination UDP port number.
+ @param[in, out] SrcIp The source IP address.
+ @param[in, out] SrcPort The source UDP port number.
+ @param[in] HeaderSize An optional field which may be set to the length of a
+ header at HeaderPtr to be prefixed to the data at BufferPtr.
+ @param[in] HeaderPtr If HeaderSize is not NULL, a pointer to a header to be
+ prefixed to the data at BufferPtr.
+ @param[in, out] BufferSize A pointer to the size of the data at BufferPtr.
+ @param[in] BufferPtr A pointer to the data to be read.
+
+ @retval EFI_SUCCESS The UDP Read operation was completed.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
+ @retval EFI_BUFFER_TOO_SMALL The packet is larger than Buffer can hold.
+ @retval EFI_ABORTED The callback function aborted the UDP Read operation.
+ @retval EFI_TIMEOUT The UDP Read operation timed out.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcUdpRead (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN UINT16 OpFlags,
+ IN OUT EFI_IP_ADDRESS *DestIp OPTIONAL,
+ IN OUT EFI_PXE_BASE_CODE_UDP_PORT *DestPort OPTIONAL,
+ IN OUT EFI_IP_ADDRESS *SrcIp OPTIONAL,
+ IN OUT EFI_PXE_BASE_CODE_UDP_PORT *SrcPort OPTIONAL,
+ IN UINTN *HeaderSize OPTIONAL,
+ IN VOID *HeaderPtr OPTIONAL,
+ IN OUT UINTN *BufferSize,
+ IN VOID *BufferPtr
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_UDP4_COMPLETION_TOKEN Udp4Token;
+ EFI_UDP6_COMPLETION_TOKEN Udp6Token;
+ EFI_UDP4_RECEIVE_DATA *Udp4Rx;
+ EFI_UDP6_RECEIVE_DATA *Udp6Rx;
+ EFI_STATUS Status;
+ BOOLEAN IsDone;
+ BOOLEAN IsMatched;
+ UINTN CopiedLen;
+ UINTN HeaderLen;
+ UINTN HeaderCopiedLen;
+ UINTN BufferCopiedLen;
+ UINT32 FragmentLength;
+ UINTN FragmentIndex;
+ UINT8 *FragmentBuffer;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+ IsDone = FALSE;
+ IsMatched = FALSE;
+ Udp4Rx = NULL;
+ Udp6Rx = NULL;
+
+ if (((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_DEST_PORT) == 0 && DestPort == NULL) ||
+ ((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_SRC_IP) == 0 && SrcIp == NULL) ||
+ ((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_SRC_PORT) == 0 && SrcPort == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((HeaderSize != NULL && *HeaderSize == 0) || (HeaderSize != NULL && HeaderPtr == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((BufferSize == NULL) || (BufferPtr == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ ZeroMem (&Udp6Token, sizeof (EFI_UDP6_COMPLETION_TOKEN));
+ ZeroMem (&Udp4Token, sizeof (EFI_UDP4_COMPLETION_TOKEN));
+
+ if (Mode->UsingIpv6) {
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ PxeBcCommonNotify,
+ &IsDone,
+ &Udp6Token.Event
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ } else {
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ PxeBcCommonNotify,
+ &IsDone,
+ &Udp4Token.Event
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ }
+
+ //
+ // Start a timer as timeout event for this blocking API.
+ //
+ gBS->SetTimer (Private->UdpTimeOutEvent, TimerRelative, PXEBC_UDP_TIMEOUT);
+ Mode->IcmpErrorReceived = FALSE;
+
+ //
+ // Read packet by Udp4Read/Udp6Read until matched or timeout.
+ //
+ while (!IsMatched && !EFI_ERROR (Status)) {
+ if (Mode->UsingIpv6) {
+ Status = PxeBcUdp6Read (
+ Private->Udp6Read,
+ &Udp6Token,
+ Mode,
+ Private->UdpTimeOutEvent,
+ OpFlags,
+ &IsDone,
+ &IsMatched,
+ DestIp,
+ DestPort,
+ SrcIp,
+ SrcPort
+ );
+ } else {
+ Status = PxeBcUdp4Read (
+ Private->Udp4Read,
+ &Udp4Token,
+ Mode,
+ Private->UdpTimeOutEvent,
+ OpFlags,
+ &IsDone,
+ &IsMatched,
+ DestIp,
+ DestPort,
+ SrcIp,
+ SrcPort
+ );
+ }
+ }
+
+ if (Status == EFI_ICMP_ERROR ||
+ Status == EFI_NETWORK_UNREACHABLE ||
+ Status == EFI_HOST_UNREACHABLE ||
+ Status == EFI_PROTOCOL_UNREACHABLE ||
+ Status == EFI_PORT_UNREACHABLE) {
+ //
+ // Get different return status for icmp error from Udp, refers to UEFI spec.
+ //
+ Mode->IcmpErrorReceived = TRUE;
+ }
+ gBS->SetTimer (Private->UdpTimeOutEvent, TimerCancel, 0);
+
+ if (IsMatched) {
+ //
+ // Copy the rececived packet to user if matched by filter.
+ //
+ if (Mode->UsingIpv6) {
+ Udp6Rx = Udp6Token.Packet.RxData;
+ ASSERT (Udp6Rx != NULL);
+
+ HeaderLen = 0;
+ if (HeaderSize != NULL) {
+ HeaderLen = MIN (*HeaderSize, Udp6Rx->DataLength);
+ }
+
+ if (Udp6Rx->DataLength - HeaderLen > *BufferSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ } else {
+ if (HeaderSize != NULL) {
+ *HeaderSize = HeaderLen;
+ }
+ *BufferSize = Udp6Rx->DataLength - HeaderLen;
+
+ HeaderCopiedLen = 0;
+ BufferCopiedLen = 0;
+ for (FragmentIndex = 0; FragmentIndex < Udp6Rx->FragmentCount; FragmentIndex++) {
+ FragmentLength = Udp6Rx->FragmentTable[FragmentIndex].FragmentLength;
+ FragmentBuffer = Udp6Rx->FragmentTable[FragmentIndex].FragmentBuffer;
+ if (HeaderCopiedLen + FragmentLength < HeaderLen) {
+ //
+ // Copy the header part of received data.
+ //
+ CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, FragmentLength);
+ HeaderCopiedLen += FragmentLength;
+ } else if (HeaderCopiedLen < HeaderLen) {
+ //
+ // Copy the header part of received data.
+ //
+ CopiedLen = HeaderLen - HeaderCopiedLen;
+ CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, CopiedLen);
+ HeaderCopiedLen += CopiedLen;
+
+ //
+ // Copy the other part of received data.
+ //
+ CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer + CopiedLen, FragmentLength - CopiedLen);
+ BufferCopiedLen += (FragmentLength - CopiedLen);
+ } else {
+ //
+ // Copy the other part of received data.
+ //
+ CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer, FragmentLength);
+ BufferCopiedLen += FragmentLength;
+ }
+ }
+ }
+ //
+ // Recycle the receiving buffer after copy to user.
+ //
+ gBS->SignalEvent (Udp6Rx->RecycleSignal);
+ } else {
+ Udp4Rx = Udp4Token.Packet.RxData;
+ ASSERT (Udp4Rx != NULL);
+
+ HeaderLen = 0;
+ if (HeaderSize != NULL) {
+ HeaderLen = MIN (*HeaderSize, Udp4Rx->DataLength);
+ }
+
+ if (Udp4Rx->DataLength - HeaderLen > *BufferSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ } else {
+ if (HeaderSize != NULL) {
+ *HeaderSize = HeaderLen;
+ }
+ *BufferSize = Udp4Rx->DataLength - HeaderLen;
+
+ HeaderCopiedLen = 0;
+ BufferCopiedLen = 0;
+ for (FragmentIndex = 0; FragmentIndex < Udp4Rx->FragmentCount; FragmentIndex++) {
+ FragmentLength = Udp4Rx->FragmentTable[FragmentIndex].FragmentLength;
+ FragmentBuffer = Udp4Rx->FragmentTable[FragmentIndex].FragmentBuffer;
+ if (HeaderCopiedLen + FragmentLength < HeaderLen) {
+ //
+ // Copy the header part of received data.
+ //
+ CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, FragmentLength);
+ HeaderCopiedLen += FragmentLength;
+ } else if (HeaderCopiedLen < HeaderLen) {
+ //
+ // Copy the header part of received data.
+ //
+ CopiedLen = HeaderLen - HeaderCopiedLen;
+ CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, CopiedLen);
+ HeaderCopiedLen += CopiedLen;
+
+ //
+ // Copy the other part of received data.
+ //
+ CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer + CopiedLen, FragmentLength - CopiedLen);
+ BufferCopiedLen += (FragmentLength - CopiedLen);
+ } else {
+ //
+ // Copy the other part of received data.
+ //
+ CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer, FragmentLength);
+ BufferCopiedLen += FragmentLength;
+ }
+ }
+ }
+ //
+ // Recycle the receiving buffer after copy to user.
+ //
+ gBS->SignalEvent (Udp4Rx->RecycleSignal);
+ }
+ }
+
+ if (Mode->UsingIpv6) {
+ Private->Udp6Read->Cancel (Private->Udp6Read, &Udp6Token);
+ gBS->CloseEvent (Udp6Token.Event);
+ } else {
+ Private->Udp4Read->Cancel (Private->Udp4Read, &Udp4Token);
+ gBS->CloseEvent (Udp4Token.Event);
+ }
+
+ return Status;
+}
+
+
+/**
+ Updates the IP receive filters of a network device and enables software filtering.
+
+ The NewFilter field is used to modify the network device's current IP receive
+ filter settings and to enable a software filter. This function updates the IpFilter
+ field of the EFI_PXE_BASE_CODE_MODE structure with the contents of NewIpFilter.
+ The software filter is used when the USE_FILTER in OpFlags is set to UdpRead().
+ The current hardware filter remains in effect no matter what the settings of OpFlags.
+ This is so that the meaning of ANY_DEST_IP set in OpFlags to UdpRead() is from those
+ packets whose reception is enabled in hardware-physical NIC address (unicast),
+ broadcast address, logical address or addresses (multicast), or all (promiscuous).
+ UdpRead() does not modify the IP filter settings.
+ Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP receive
+ filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.
+ If an application or driver wishes to preserve the IP receive filter settings,
+ it will have to preserve the IP receive filter settings before these calls, and
+ use SetIpFilter() to restore them after the calls. If incompatible filtering is
+ requested (for example, PROMISCUOUS with anything else), or if the device does not
+ support a requested filter setting and it cannot be accommodated in software
+ (for example, PROMISCUOUS not supported), EFI_INVALID_PARAMETER will be returned.
+ The IPlist field is used to enable IPs other than the StationIP. They may be
+ multicast or unicast. If IPcnt is set as well as EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP,
+ then both the StationIP and the IPs from the IPlist will be used.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] NewFilter Pointer to the new set of IP receive filters.
+
+ @retval EFI_SUCCESS The IP receive filter settings were updated.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcSetIpFilter (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN EFI_PXE_BASE_CODE_IP_FILTER *NewFilter
+ )
+{
+ EFI_STATUS Status;
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_UDP4_CONFIG_DATA *Udp4Cfg;
+ EFI_UDP6_CONFIG_DATA *Udp6Cfg;
+ UINTN Index;
+ BOOLEAN NeedPromiscuous;
+ BOOLEAN AcceptPromiscuous;
+ BOOLEAN AcceptBroadcast;
+ BOOLEAN MultiCastUpdate;
+
+ if (This == NULL || NewFilter == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+ Status = EFI_SUCCESS;
+ NeedPromiscuous = FALSE;
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ for (Index = 0; Index < NewFilter->IpCnt; Index++) {
+ ASSERT (Index < EFI_PXE_BASE_CODE_MAX_IPCNT);
+ if (!Mode->UsingIpv6 &&
+ IP4_IS_LOCAL_BROADCAST (EFI_IP4 (NewFilter->IpList[Index].v4))) {
+ //
+ // IPv4 broadcast address should not be in IP filter.
+ //
+ return EFI_INVALID_PARAMETER;
+ }
+ if ((NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP) != 0 &&
+ (NetIp4IsUnicast (EFI_IP4 (NewFilter->IpList[Index].v4), 0) ||
+ NetIp6IsValidUnicast (&NewFilter->IpList[Index].v6))) {
+ //
+ // If EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP is set and IPv4/IPv6 address
+ // is in IpList, promiscuous mode is needed.
+ //
+ NeedPromiscuous = TRUE;
+ }
+ }
+
+ AcceptPromiscuous = FALSE;
+ AcceptBroadcast = FALSE;
+ MultiCastUpdate = FALSE;
+
+ if (NeedPromiscuous ||
+ (NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_PROMISCUOUS) != 0 ||
+ (NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_PROMISCUOUS_MULTICAST) != 0) {
+ //
+ // Configure UDPv4/UDPv6 as promiscuous mode to receive all packets.
+ //
+ AcceptPromiscuous = TRUE;
+ } else if ((NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_BROADCAST) != 0) {
+ //
+ // Configure UDPv4 to receive all broadcast packets.
+ //
+ AcceptBroadcast = TRUE;
+ }
+
+ //
+ // In multicast condition when Promiscuous FALSE and IpCnt no-zero.
+ // Here check if there is any update of the multicast ip address. If yes,
+ // we need leave the old multicast group (by Config UDP instance to NULL),
+ // and join the new multicast group.
+ //
+ if (!AcceptPromiscuous) {
+ if ((NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP) != 0) {
+ if (Mode->IpFilter.IpCnt != NewFilter->IpCnt) {
+ MultiCastUpdate = TRUE;
+ } else if (CompareMem (Mode->IpFilter.IpList, NewFilter->IpList, NewFilter->IpCnt * sizeof (EFI_IP_ADDRESS)) != 0 ) {
+ MultiCastUpdate = TRUE;
+ }
+ }
+ }
+
+ if (!Mode->UsingIpv6) {
+ //
+ // Check whether we need reconfigure the UDP4 instance.
+ //
+ Udp4Cfg = &Private->Udp4CfgData;
+ if ((AcceptPromiscuous != Udp4Cfg->AcceptPromiscuous) ||
+ (AcceptBroadcast != Udp4Cfg->AcceptBroadcast) || MultiCastUpdate) {
+ //
+ // Clear the UDP4 instance configuration, all joined groups will be left
+ // during the operation.
+ //
+ Private->Udp4Read->Configure (Private->Udp4Read, NULL);
+
+ //
+ // Configure the UDP instance with the new configuration.
+ //
+ Udp4Cfg->AcceptPromiscuous = AcceptPromiscuous;
+ Udp4Cfg->AcceptBroadcast = AcceptBroadcast;
+ Status = Private->Udp4Read->Configure (Private->Udp4Read, Udp4Cfg);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // In not Promiscuous mode, need to join the new multicast group.
+ //
+ if (!AcceptPromiscuous) {
+ for (Index = 0; Index < NewFilter->IpCnt; ++Index) {
+ if (IP4_IS_MULTICAST (EFI_NTOHL (NewFilter->IpList[Index].v4))) {
+ //
+ // Join the mutilcast group.
+ //
+ Status = Private->Udp4Read->Groups (Private->Udp4Read, TRUE, &NewFilter->IpList[Index].v4);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+ }
+ }
+ }
+ } else {
+ //
+ // Check whether we need reconfigure the UDP6 instance.
+ //
+ Udp6Cfg = &Private->Udp6CfgData;
+ if ((AcceptPromiscuous != Udp6Cfg->AcceptPromiscuous) || MultiCastUpdate) {
+ //
+ // Clear the UDP6 instance configuration, all joined groups will be left
+ // during the operation.
+ //
+ Private->Udp6Read->Configure (Private->Udp6Read, NULL);
+
+ //
+ // Configure the UDP instance with the new configuration.
+ //
+ Udp6Cfg->AcceptPromiscuous = AcceptPromiscuous;
+ Status = Private->Udp6Read->Configure (Private->Udp6Read, Udp6Cfg);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // In not Promiscuous mode, need to join the new multicast group.
+ //
+ if (!AcceptPromiscuous) {
+ for (Index = 0; Index < NewFilter->IpCnt; ++Index) {
+ if (IP6_IS_MULTICAST (&NewFilter->IpList[Index].v6)) {
+ //
+ // Join the mutilcast group.
+ //
+ Status = Private->Udp6Read->Groups (Private->Udp6Read, TRUE, &NewFilter->IpList[Index].v6);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+ }
+ }
+ }
+ }
+
+ //
+ // Save the new IP filter into mode data.
+ //
+ CopyMem (&Mode->IpFilter, NewFilter, sizeof (Mode->IpFilter));
+
+ return Status;
+}
+
+
+/**
+ Uses the ARP protocol to resolve a MAC address. It is not supported for IPv6.
+
+ This function uses the ARP protocol to resolve a MAC address. The IP address specified
+ by IpAddr is used to resolve a MAC address. If the ARP protocol succeeds in resolving
+ the specified address, then the ArpCacheEntries and ArpCache fields of the mode data
+ are updated, and EFI_SUCCESS is returned. If MacAddr is not NULL, the resolved
+ MAC address is placed there as well. If the PXE Base Code protocol is in the
+ stopped state, then EFI_NOT_STARTED is returned. If the ARP protocol encounters
+ a timeout condition while attempting to resolve an address, then EFI_TIMEOUT is
+ returned. If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,
+ then EFI_ABORTED is returned.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] IpAddr Pointer to the IP address that is used to resolve a MAC address.
+ @param[in] MacAddr If not NULL, a pointer to the MAC address that was resolved with the
+ ARP protocol.
+
+ @retval EFI_SUCCESS The IP or MAC address was resolved.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
+ @retval EFI_ICMP_ERROR An error occur with the ICMP packet message.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcArp (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN EFI_IP_ADDRESS *IpAddr,
+ IN EFI_MAC_ADDRESS *MacAddr OPTIONAL
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_EVENT ResolvedEvent;
+ EFI_STATUS Status;
+ EFI_MAC_ADDRESS TempMac;
+ EFI_MAC_ADDRESS ZeroMac;
+ BOOLEAN IsResolved;
+
+ if (This == NULL || IpAddr == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+ ResolvedEvent = NULL;
+ Status = EFI_SUCCESS;
+ IsResolved = FALSE;
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (Mode->UsingIpv6) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Station address should be ready before do arp.
+ //
+ if (!Private->IsAddressOk) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Mode->IcmpErrorReceived = FALSE;
+ ZeroMem (&TempMac, sizeof (EFI_MAC_ADDRESS));
+ ZeroMem (&ZeroMac, sizeof (EFI_MAC_ADDRESS));
+
+ if (!Mode->AutoArp) {
+ //
+ // If AutoArp is FALSE, only search in the current Arp cache.
+ //
+ PxeBcArpCacheUpdate (NULL, Private);
+ if (!PxeBcCheckArpCache (Mode, &IpAddr->v4, &TempMac)) {
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+ } else {
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ PxeBcCommonNotify,
+ &IsResolved,
+ &ResolvedEvent
+ );
+ if (EFI_ERROR (Status)) {
+ goto ON_EXIT;
+ }
+
+ //
+ // If AutoArp is TRUE, try to send Arp request on initiative.
+ //
+ Status = Private->Arp->Request (Private->Arp, &IpAddr->v4, ResolvedEvent, &TempMac);
+ if (EFI_ERROR (Status) && Status != EFI_NOT_READY) {
+ goto ON_EXIT;
+ }
+
+ while (!IsResolved) {
+ if (CompareMem (&TempMac, &ZeroMac, sizeof (EFI_MAC_ADDRESS)) != 0) {
+ break;
+ }
+ }
+ if (CompareMem (&TempMac, &ZeroMac, sizeof (EFI_MAC_ADDRESS)) != 0) {
+ Status = EFI_SUCCESS;
+ } else {
+ Status = EFI_TIMEOUT;
+ }
+ }
+
+ //
+ // Copy the Mac address to user if needed.
+ //
+ if (MacAddr != NULL && !EFI_ERROR (Status)) {
+ CopyMem (MacAddr, &TempMac, sizeof (EFI_MAC_ADDRESS));
+ }
+
+ON_EXIT:
+ if (ResolvedEvent != NULL) {
+ gBS->CloseEvent (ResolvedEvent);
+ }
+ return Status;
+}
+
+
+/**
+ Updates the parameters that affect the operation of the PXE Base Code Protocol.
+
+ This function sets parameters that affect the operation of the PXE Base Code Protocol.
+ The parameter specified by NewAutoArp is used to control the generation of ARP
+ protocol packets. If NewAutoArp is TRUE, then ARP Protocol packets will be generated
+ as required by the PXE Base Code Protocol. If NewAutoArp is FALSE, then no ARP
+ Protocol packets will be generated. In this case, the only mappings that are
+ available are those stored in the ArpCache of the EFI_PXE_BASE_CODE_MODE structure.
+ If there are not enough mappings in the ArpCache to perform a PXE Base Code Protocol
+ service, then the service will fail. This function updates the AutoArp field of
+ the EFI_PXE_BASE_CODE_MODE structure to NewAutoArp.
+ The SetParameters() call must be invoked after a Callback Protocol is installed
+ to enable the use of callbacks.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] NewAutoArp If not NULL, a pointer to a value that specifies whether to replace the
+ current value of AutoARP.
+ @param[in] NewSendGUID If not NULL, a pointer to a value that specifies whether to replace the
+ current value of SendGUID.
+ @param[in] NewTTL If not NULL, a pointer to be used in place of the current value of TTL,
+ the "time to live" field of the IP header.
+ @param[in] NewToS If not NULL, a pointer to be used in place of the current value of ToS,
+ the "type of service" field of the IP header.
+ @param[in] NewMakeCallback If not NULL, a pointer to a value that specifies whether to replace the
+ current value of the MakeCallback field of the Mode structure.
+
+ @retval EFI_SUCCESS The new parameters values were updated.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcSetParameters (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN BOOLEAN *NewAutoArp OPTIONAL,
+ IN BOOLEAN *NewSendGUID OPTIONAL,
+ IN UINT8 *NewTTL OPTIONAL,
+ IN UINT8 *NewToS OPTIONAL,
+ IN BOOLEAN *NewMakeCallback OPTIONAL
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_GUID SystemGuid;
+ EFI_STATUS Status;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (NewMakeCallback != NULL) {
+ if (*NewMakeCallback) {
+ //
+ // Update the previous PxeBcCallback protocol.
+ //
+ Status = gBS->HandleProtocol (
+ Private->Controller,
+ &gEfiPxeBaseCodeCallbackProtocolGuid,
+ (VOID **) &Private->PxeBcCallback
+ );
+
+ if (EFI_ERROR (Status) || (Private->PxeBcCallback->Callback == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ } else {
+ Private->PxeBcCallback = NULL;
+ }
+ Mode->MakeCallbacks = *NewMakeCallback;
+ }
+
+ if (NewSendGUID != NULL) {
+ if (*NewSendGUID && EFI_ERROR (NetLibGetSystemGuid (&SystemGuid))) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Mode->SendGUID = *NewSendGUID;
+ }
+
+ if (NewAutoArp != NULL) {
+ Mode->AutoArp = *NewAutoArp;
+ }
+
+ if (NewTTL != NULL) {
+ Mode->TTL = *NewTTL;
+ }
+
+ if (NewToS != NULL) {
+ Mode->ToS = *NewToS;
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Updates the station IP address and/or subnet mask values of a network device.
+
+ This function updates the station IP address and/or subnet mask values of a network
+ device. The NewStationIp field is used to modify the network device's current IP address.
+ If NewStationIP is NULL, then the current IP address will not be modified. Otherwise,
+ this function updates the StationIp field of the EFI_PXE_BASE_CODE_MODE structure
+ with NewStationIp. The NewSubnetMask field is used to modify the network device's current subnet
+ mask. If NewSubnetMask is NULL, then the current subnet mask will not be modified.
+ Otherwise, this function updates the SubnetMask field of the EFI_PXE_BASE_CODE_MODE
+ structure with NewSubnetMask.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] NewStationIp Pointer to the new IP address to be used by the network device.
+ @param[in] NewSubnetMask Pointer to the new subnet mask to be used by the network device.
+
+ @retval EFI_SUCCESS The new station IP address and/or subnet mask were updated.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcSetStationIP (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN EFI_IP_ADDRESS *NewStationIp OPTIONAL,
+ IN EFI_IP_ADDRESS *NewSubnetMask OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+ EFI_ARP_CONFIG_DATA ArpConfigData;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (NewStationIp != NULL &&
+ (!NetIp4IsUnicast (NTOHL (NewStationIp->Addr[0]), 0) &&
+ !NetIp6IsValidUnicast (&NewStationIp->v6))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+ Status = EFI_SUCCESS;
+
+ if (!Mode->UsingIpv6 &&
+ NewSubnetMask != NULL &&
+ !IP4_IS_VALID_NETMASK (NTOHL (NewSubnetMask->Addr[0]))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (Mode->UsingIpv6 && NewStationIp != NULL) {
+ //
+ // Set the IPv6 address by Ip6Config protocol.
+ //
+ Status = PxeBcRegisterIp6Address (Private, &NewStationIp->v6);
+ if (EFI_ERROR (Status)) {
+ goto ON_EXIT;
+ }
+ } else if (!Mode->UsingIpv6 && NewStationIp != NULL) {
+ //
+ // Configure the corresponding ARP with the IPv4 address.
+ //
+ ZeroMem (&ArpConfigData, sizeof (EFI_ARP_CONFIG_DATA));
+
+ ArpConfigData.SwAddressType = 0x0800;
+ ArpConfigData.SwAddressLength = (UINT8) sizeof (EFI_IPv4_ADDRESS);
+ ArpConfigData.StationAddress = &NewStationIp->v4;
+
+ Private->Arp->Configure (Private->Arp, NULL);
+ Private->Arp->Configure (Private->Arp, &ArpConfigData);
+
+ if (NewSubnetMask != NULL) {
+ Mode->RouteTableEntries = 1;
+ Mode->RouteTable[0].IpAddr.Addr[0] = NewStationIp->Addr[0] & NewSubnetMask->Addr[0];
+ Mode->RouteTable[0].SubnetMask.Addr[0] = NewSubnetMask->Addr[0];
+ Mode->RouteTable[0].GwAddr.Addr[0] = 0;
+ }
+
+ Private->IsAddressOk = TRUE;
+ }
+
+ if (NewStationIp != NULL) {
+ CopyMem (&Mode->StationIp, NewStationIp, sizeof (EFI_IP_ADDRESS));
+ CopyMem (&Private->StationIp, NewStationIp, sizeof (EFI_IP_ADDRESS));
+ }
+
+ if (!Mode->UsingIpv6 && NewSubnetMask != NULL) {
+ CopyMem (&Mode->SubnetMask, NewSubnetMask, sizeof (EFI_IP_ADDRESS));
+ CopyMem (&Private->SubnetMask ,NewSubnetMask, sizeof (EFI_IP_ADDRESS));
+ }
+
+ Status = PxeBcFlushStationIp (Private, NewStationIp, NewSubnetMask);
+ON_EXIT:
+ return Status;
+}
+
+
+/**
+ Updates the contents of the cached DHCP and Discover packets.
+
+ The pointers to the new packets are used to update the contents of the cached
+ packets in the EFI_PXE_BASE_CODE_MODE structure.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
+ @param[in] NewDhcpDiscoverValid Pointer to a value that will replace the current
+ DhcpDiscoverValid field.
+ @param[in] NewDhcpAckReceived Pointer to a value that will replace the current
+ DhcpAckReceived field.
+ @param[in] NewProxyOfferReceived Pointer to a value that will replace the current
+ ProxyOfferReceived field.
+ @param[in] NewPxeDiscoverValid Pointer to a value that will replace the current
+ ProxyOfferReceived field.
+ @param[in] NewPxeReplyReceived Pointer to a value that will replace the current
+ PxeReplyReceived field.
+ @param[in] NewPxeBisReplyReceived Pointer to a value that will replace the current
+ PxeBisReplyReceived field.
+ @param[in] NewDhcpDiscover Pointer to the new cached DHCP Discover packet contents.
+ @param[in] NewDhcpAck Pointer to the new cached DHCP Ack packet contents.
+ @param[in] NewProxyOffer Pointer to the new cached Proxy Offer packet contents.
+ @param[in] NewPxeDiscover Pointer to the new cached PXE Discover packet contents.
+ @param[in] NewPxeReply Pointer to the new cached PXE Reply packet contents.
+ @param[in] NewPxeBisReply Pointer to the new cached PXE BIS Reply packet contents.
+
+ @retval EFI_SUCCESS The cached packet contents were updated.
+ @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
+ @retval EFI_INVALID_PARAMETER This is NULL or does not point to a valid
+ EFI_PXE_BASE_CODE_PROTOCOL structure.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeBcSetPackets (
+ IN EFI_PXE_BASE_CODE_PROTOCOL *This,
+ IN BOOLEAN *NewDhcpDiscoverValid OPTIONAL,
+ IN BOOLEAN *NewDhcpAckReceived OPTIONAL,
+ IN BOOLEAN *NewProxyOfferReceived OPTIONAL,
+ IN BOOLEAN *NewPxeDiscoverValid OPTIONAL,
+ IN BOOLEAN *NewPxeReplyReceived OPTIONAL,
+ IN BOOLEAN *NewPxeBisReplyReceived OPTIONAL,
+ IN EFI_PXE_BASE_CODE_PACKET *NewDhcpDiscover OPTIONAL,
+ IN EFI_PXE_BASE_CODE_PACKET *NewDhcpAck OPTIONAL,
+ IN EFI_PXE_BASE_CODE_PACKET *NewProxyOffer OPTIONAL,
+ IN EFI_PXE_BASE_CODE_PACKET *NewPxeDiscover OPTIONAL,
+ IN EFI_PXE_BASE_CODE_PACKET *NewPxeReply OPTIONAL,
+ IN EFI_PXE_BASE_CODE_PACKET *NewPxeBisReply OPTIONAL
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ EFI_PXE_BASE_CODE_MODE *Mode;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);
+ Mode = Private->PxeBc.Mode;
+
+ if (!Mode->Started) {
+ return EFI_NOT_STARTED;
+ }
+
+ if (NewDhcpDiscoverValid != NULL) {
+ Mode->DhcpDiscoverValid = *NewDhcpDiscoverValid;
+ }
+
+ if (NewDhcpAckReceived != NULL) {
+ Mode->DhcpAckReceived = *NewDhcpAckReceived;
+ }
+
+ if (NewProxyOfferReceived != NULL) {
+ Mode->ProxyOfferReceived = *NewProxyOfferReceived;
+ }
+
+ if (NewPxeDiscoverValid != NULL) {
+ Mode->PxeDiscoverValid = *NewPxeDiscoverValid;
+ }
+
+ if (NewPxeReplyReceived != NULL) {
+ Mode->PxeReplyReceived = *NewPxeReplyReceived;
+ }
+
+ if (NewPxeBisReplyReceived != NULL) {
+ Mode->PxeBisReplyReceived = *NewPxeBisReplyReceived;
+ }
+
+ if (NewDhcpDiscover != NULL) {
+ CopyMem (&Mode->DhcpDiscover, NewDhcpDiscover, sizeof (EFI_PXE_BASE_CODE_PACKET));
+ }
+
+ if (NewDhcpAck != NULL) {
+ CopyMem (&Mode->DhcpAck, NewDhcpAck, sizeof (EFI_PXE_BASE_CODE_PACKET));
+ }
+
+ if (NewProxyOffer != NULL) {
+ CopyMem (&Mode->ProxyOffer, NewProxyOffer, sizeof (EFI_PXE_BASE_CODE_PACKET));
+ }
+
+ if (NewPxeDiscover != NULL) {
+ CopyMem (&Mode->PxeDiscover, NewPxeDiscover, sizeof (EFI_PXE_BASE_CODE_PACKET));
+ }
+
+ if (NewPxeReply != NULL) {
+ CopyMem (&Mode->PxeReply, NewPxeReply, sizeof (EFI_PXE_BASE_CODE_PACKET));
+ }
+
+ if (NewPxeBisReply != NULL) {
+ CopyMem (&Mode->PxeBisReply, NewPxeBisReply, sizeof (EFI_PXE_BASE_CODE_PACKET));
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_PXE_BASE_CODE_PROTOCOL gPxeBcProtocolTemplate = {
+ EFI_PXE_BASE_CODE_PROTOCOL_REVISION,
+ EfiPxeBcStart,
+ EfiPxeBcStop,
+ EfiPxeBcDhcp,
+ EfiPxeBcDiscover,
+ EfiPxeBcMtftp,
+ EfiPxeBcUdpWrite,
+ EfiPxeBcUdpRead,
+ EfiPxeBcSetIpFilter,
+ EfiPxeBcArp,
+ EfiPxeBcSetParameters,
+ EfiPxeBcSetStationIP,
+ EfiPxeBcSetPackets,
+ NULL
+};
+
+
+/**
+ Callback function that is invoked when the PXE Base Code Protocol is about to transmit, has
+ received, or is waiting to receive a packet.
+
+ This function is invoked when the PXE Base Code Protocol is about to transmit, has received,
+ or is waiting to receive a packet. Parameters Function and Received specify the type of event.
+ Parameters PacketLen and Packet specify the packet that generated the event. If these fields
+ are zero and NULL respectively, then this is a status update callback. If the operation specified
+ by Function is to continue, then CALLBACK_STATUS_CONTINUE should be returned. If the operation
+ specified by Function should be aborted, then CALLBACK_STATUS_ABORT should be returned. Due to
+ the polling nature of UEFI device drivers, a callback function should not execute for more than 5 ms.
+ The SetParameters() function must be called after a Callback Protocol is installed to enable the
+ use of callbacks.
+
+ @param[in] This Pointer to the EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL instance.
+ @param[in] Function The PXE Base Code Protocol function that is waiting for an event.
+ @param[in] Received TRUE if the callback is being invoked due to a receive event. FALSE if
+ the callback is being invoked due to a transmit event.
+ @param[in] PacketLength The length, in bytes, of Packet. This field will have a value of zero if
+ this is a wait for receive event.
+ @param[in] PacketPtr If Received is TRUE, a pointer to the packet that was just received;
+ otherwise a pointer to the packet that is about to be transmitted.
+
+ @retval EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE If Function specifies a continue operation.
+ @retval EFI_PXE_BASE_CODE_CALLBACK_STATUS_ABORT If Function specifies an abort operation.
+
+**/
+EFI_PXE_BASE_CODE_CALLBACK_STATUS
+EFIAPI
+EfiPxeLoadFileCallback (
+ IN EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL *This,
+ IN EFI_PXE_BASE_CODE_FUNCTION Function,
+ IN BOOLEAN Received,
+ IN UINT32 PacketLength,
+ IN EFI_PXE_BASE_CODE_PACKET *PacketPtr OPTIONAL
+ )
+{
+ EFI_INPUT_KEY Key;
+ EFI_STATUS Status;
+
+ //
+ // Catch Ctrl-C or ESC to abort.
+ //
+ Status = gST->ConIn->ReadKeyStroke (gST->ConIn, &Key);
+
+ if (!EFI_ERROR (Status)) {
+
+ if (Key.ScanCode == SCAN_ESC || Key.UnicodeChar == (0x1F & 'c')) {
+
+ return EFI_PXE_BASE_CODE_CALLBACK_STATUS_ABORT;
+ }
+ }
+ //
+ // No print if receive packet
+ //
+ if (Received) {
+ return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;
+ }
+ //
+ // Print only for three functions
+ //
+ switch (Function) {
+
+ case EFI_PXE_BASE_CODE_FUNCTION_MTFTP:
+ //
+ // Print only for open MTFTP packets, not every MTFTP packets
+ //
+ if (PacketLength != 0 && PacketPtr != NULL) {
+ if (PacketPtr->Raw[0x1C] != 0x00 || PacketPtr->Raw[0x1D] != 0x01) {
+ return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;
+ }
+ }
+ break;
+
+ case EFI_PXE_BASE_CODE_FUNCTION_DHCP:
+ case EFI_PXE_BASE_CODE_FUNCTION_DISCOVER:
+ break;
+
+ default:
+ return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;
+ }
+
+ if (PacketLength != 0 && PacketPtr != NULL) {
+ //
+ // Print '.' when transmit a packet
+ //
+ AsciiPrint (".");
+ }
+
+ return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;
+}
+
+EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL gPxeBcCallBackTemplate = {
+ EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL_REVISION,
+ EfiPxeLoadFileCallback
+};
+
+
+/**
+ Causes the driver to load a specified file.
+
+ @param[in] This Protocol instance pointer.
+ @param[in] FilePath The device specific path of the file to load.
+ @param[in] BootPolicy If TRUE, indicates that the request originates from the
+ boot manager is attempting to load FilePath as a boot
+ selection. If FALSE, then FilePath must match an exact file
+ to be loaded.
+ @param[in, out] BufferSize On input the size of Buffer in bytes. On output with a return
+ code of EFI_SUCCESS, the amount of data transferred to
+ Buffer. On output with a return code of EFI_BUFFER_TOO_SMALL,
+ the size of Buffer required to retrieve the requested file.
+ @param[in] Buffer The memory buffer to transfer the file to. IF Buffer is NULL,
+ then no the size of the requested file is returned in
+ BufferSize.
+
+ @retval EFI_SUCCESS The file was loaded.
+ @retval EFI_UNSUPPORTED The device does not support the provided BootPolicy.
+ @retval EFI_INVALID_PARAMETER FilePath is not a valid device path, or
+ BufferSize is NULL.
+ @retval EFI_NO_MEDIA No medium was present to load the file.
+ @retval EFI_DEVICE_ERROR The file was not loaded due to a device error.
+ @retval EFI_NO_RESPONSE The remote system did not respond.
+ @retval EFI_NOT_FOUND The file was not found.
+ @retval EFI_ABORTED The file load process was manually cancelled.
+
+**/
+EFI_STATUS
+EFIAPI
+EfiPxeLoadFile (
+ IN EFI_LOAD_FILE_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath,
+ IN BOOLEAN BootPolicy,
+ IN OUT UINTN *BufferSize,
+ IN VOID *Buffer OPTIONAL
+ )
+{
+ PXEBC_PRIVATE_DATA *Private;
+ PXEBC_VIRTUAL_NIC *VirtualNic;
+ EFI_PXE_BASE_CODE_PROTOCOL *PxeBc;
+ BOOLEAN UsingIpv6;
+ EFI_STATUS Status;
+ BOOLEAN MediaPresent;
+
+ if (FilePath == NULL || !IsDevicePathEnd (FilePath)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ VirtualNic = PXEBC_VIRTUAL_NIC_FROM_LOADFILE (This);
+ Private = VirtualNic->Private;
+ PxeBc = &Private->PxeBc;
+ UsingIpv6 = FALSE;
+ Status = EFI_DEVICE_ERROR;
+
+ if (This == NULL || BufferSize == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Only support BootPolicy
+ //
+ if (!BootPolicy) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Check media status before PXE start
+ //
+ MediaPresent = TRUE;
+ NetLibDetectMedia (Private->Controller, &MediaPresent);
+ if (!MediaPresent) {
+ return EFI_NO_MEDIA;
+ }
+
+ //
+ // Check whether the virtual nic is using IPv6 or not.
+ //
+ if (VirtualNic == Private->Ip6Nic) {
+ UsingIpv6 = TRUE;
+ }
+
+ //
+ // Start Pxe Base Code to initialize PXE boot.
+ //
+ Status = PxeBc->Start (PxeBc, UsingIpv6);
+ if (Status == EFI_ALREADY_STARTED && UsingIpv6 != PxeBc->Mode->UsingIpv6) {
+ //
+ // PxeBc protocol has already been started but not on the required IP version, restart it.
+ //
+ Status = PxeBc->Stop (PxeBc);
+ if (!EFI_ERROR (Status)) {
+ Status = PxeBc->Start (PxeBc, UsingIpv6);
+ }
+ }
+ if (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED) {
+ Status = PxeBcLoadBootFile (Private, BufferSize, Buffer);
+ }
+
+ if (Status != EFI_SUCCESS &&
+ Status != EFI_UNSUPPORTED &&
+ Status != EFI_BUFFER_TOO_SMALL) {
+ //
+ // There are three cases, which needn't stop pxebc here.
+ // 1. success to download file.
+ // 2. success to get file size.
+ // 3. unsupported.
+ //
+ PxeBc->Stop (PxeBc);
+ } else {
+ //
+ // The DHCP4 can have only one configured child instance so we need to stop
+ // reset the DHCP4 child before we return. Otherwise these programs which
+ // also need to use DHCP4 will be impacted.
+ //
+ if (!PxeBc->Mode->UsingIpv6) {
+ Private->Dhcp4->Stop (Private->Dhcp4);
+ Private->Dhcp4->Configure (Private->Dhcp4, NULL);
+ }
+ }
+
+ return Status;
+}
+
+EFI_LOAD_FILE_PROTOCOL gLoadFileProtocolTemplate = { EfiPxeLoadFile };
+
|