diff options
Diffstat (limited to 'Platform/BroxtonPlatformPkg')
94 files changed, 18169 insertions, 0 deletions
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/98_LINK.ASL b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/98_LINK.ASL new file mode 100644 index 0000000000..eb3ca15800 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/98_LINK.ASL @@ -0,0 +1,589 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+// Use this information when determining the Possible IRQs that can be
+// used in a given system.
+//
+// The following IRQs are always in use by legacy devices:
+// 0 = System Timer
+// 2 = 8259 PIC
+// 8 = RTC
+// 9 = SCI Interrupt (It may be used, we choose not to)
+// 13 = Co-processor Error
+//
+// The following may be in use by legacy devices:
+// 1 = If using PS/2 Keyboard
+// 3 = If COMx Port Enabled and IRQ = 3
+// 4 = If COMx Port Enabled and IRQ = 4
+// 5 = If LPT Port Enabled and IRQ = 5
+// 6 = If FDC Enabled
+// 7 = If LPT Port Enabled and IRQ = 7
+// 12 = If using PS/2 Mouse
+// 14 = Primary IDE (If populated and in Compatibility Mode)
+// 15 = Secondary IDE (If populated and in Compatibility Mode)
+//
+// The following will never be in use by legacy devices:
+// 10 = Assign to PARC, PCRC, PERC, PGRC
+// 11 = Assign to PBRC, PDRC, PFRC, PHRC
+
+Device(LNKA) // PARC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F")) // PCI Interrupt Link Device
+
+ Name(_UID,1) // Unique to other Link Devices
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PARC,0x80,PARC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSA)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLA,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLA,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PARC,0x0F),IRQ0)
+
+ Return(RTLA)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PARC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PARC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
+
+Device(LNKB) // PBRC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F"))
+
+ Name(_UID,2)
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PBRC,0x80,PBRC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSB)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLB,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLB,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PBRC,0x0F),IRQ0)
+
+ Return(RTLB)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in.
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it,
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PBRC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PBRC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
+
+Device(LNKC) // PCRC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F"))
+
+ Name(_UID,3)
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PCRC,0x80,PCRC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSC)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLC,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLC,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PCRC,0x0F),IRQ0)
+
+ Return(RTLC)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in.
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it,
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PCRC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PCRC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
+
+Device(LNKD) // PDRC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F"))
+
+ Name(_UID,4)
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PDRC,0x80,PDRC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSD)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLD,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLD,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PDRC,0x0F),IRQ0)
+
+ Return(RTLD)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in.
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it,
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PDRC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PDRC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
+
+Device(LNKE) // PERC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F"))
+
+ Name(_UID,5)
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PERC,0x80,PERC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSE)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLE,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLE,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PERC,0x0F),IRQ0)
+
+ Return(RTLE)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PERC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PERC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
+
+Device(LNKF) // PFRC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F"))
+
+ Name(_UID,6)
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PFRC,0x80,PFRC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSF)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLF,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLF,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PFRC,0x0F),IRQ0)
+
+ Return(RTLF)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in.
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it,
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PFRC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PFRC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
+
+Device(LNKG) // PGRC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F"))
+
+ Name(_UID,7)
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PGRC,0x80,PGRC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSG)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLG,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLG,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PGRC,0x0F),IRQ0)
+
+ Return(RTLG)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in.
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it,
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PGRC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PGRC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
+
+Device(LNKH) // PHRC Routing Resource
+{
+ Name(_HID,EISAID("PNP0C0F"))
+
+ Name(_UID,8)
+
+ // Disable the PCI IRQ.
+
+ Method(_DIS,0,Serialized)
+ {
+ Or(PHRC,0x80,PHRC)
+ }
+
+ // Possible IRQ Resource Setting.
+
+ Method (_PRS, 0, Serialized)
+ {
+ return (PRSH)
+ }
+
+ // Current IRQ Resource Setting.
+
+ Method(_CRS,0,Serialized)
+ {
+ Name(RTLH,ResourceTemplate()
+ {
+ IRQ(Level,ActiveLow,Shared) {}
+ })
+
+ // Point to specific byte.
+
+ CreateWordField(RTLH,1,IRQ0)
+
+ // Zero out IRQ mask bits 0-15
+
+ Store(Zero,IRQ0)
+
+ ShiftLeft(1,And(PHRC,0x0F),IRQ0)
+
+ Return(RTLH)
+ }
+
+ // Set IRQ Resource Setting.
+
+ Method(_SRS,1,Serialized)
+ {
+ // Point to the specific byte passed in.
+
+ CreateWordField(Arg0,1,IRQ0)
+
+ // Determine the IRQ bit to set and store it,
+
+ FindSetRightBit(IRQ0,Local0)
+ Decrement(Local0)
+ Store(Local0,PHRC)
+ }
+
+ // PCI IRQ Status.
+
+ Method(_STA,0,Serialized)
+ {
+ If (And(PHRC,0x80)) {
+ Return(0x0009)
+ } Else {
+ Return(0x000B)
+ }
+ }
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AMLUPD.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AMLUPD.asl new file mode 100644 index 0000000000..32c4f7f1b7 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AMLUPD.asl @@ -0,0 +1,26 @@ +/** @file
+ ACPI DSDT table
+
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+///////////////////////////////////////////////////////////////////////////////////
+//Values are set like this to have ASL compiler reserve enough space for objects
+///////////////////////////////////////////////////////////////////////////////////
+//
+// Available Sleep states
+//
+Name(SS1,0)
+Name(SS2,0)
+Name(SS3,1)
+Name(SS4,1)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AcpiTablePlatform.h b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AcpiTablePlatform.h new file mode 100644 index 0000000000..f588165198 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AcpiTablePlatform.h @@ -0,0 +1,68 @@ +/** @file
+ This file describes the contents of the ACPI Fixed ACPI Description Table
+ (FADT).
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _Platform_h_INCLUDED_
+#define _Platform_h_INCLUDED_
+
+#include <IndustryStandard/Acpi.h>
+
+//
+// ACPI table information used to initialize tables.
+//
+#define EFI_ACPI_OEM_ID 'I','N','T','E','L',' ' // OEMID 6 bytes long
+#define EFI_ACPI_OEM_TABLE_ID SIGNATURE_64('L','A','N','F','O','R','D','C') // OEM table id 8 bytes long
+#define EFI_ACPI_OEM_REVISION 0x00000005
+#define EFI_ACPI_CREATOR_ID SIGNATURE_32('M','S','F','T')
+#define EFI_ACPI_CREATOR_REVISION 0x0100000D
+#define INT_MODEL 0x01
+#define PM_PROFILE EFI_ACPI_4_0_PM_PROFILE_MOBILE
+#define SCI_INT_VECTOR 0x0009
+#define SMI_CMD_IO_PORT 0x000000B2
+#define ACPI_ENABLE 0x0A0
+#define ACPI_DISABLE 0x0A1
+#define S4BIOS_REQ 0x00
+#define PSTATE_CNT 0x00
+#define PM1a_EVT_BLK 0x400
+#define PM1b_EVT_BLK 0x00000000
+#define PM1a_CNT_BLK 0x404
+#define PM1b_CNT_BLK 0x00000000
+#define PM2_CNT_BLK 0x450
+#define PM_TMR_BLK 0x408
+#define GPE0_BLK 0x420
+#define GPE1_BLK 0x00000000
+#define PM1_EVT_LEN 0x04
+#define PM1_CNT_LEN 0x02
+#define PM2_CNT_LEN 0x01
+#define PM_TM_LEN 0x04
+#define GPE0_BLK_LEN 0x20
+#define GPE1_BLK_LEN 0x00
+#define GPE1_BASE 0x00
+#define CST_CNT 0x00
+#define P_LVL2_LAT 0x0032
+#define P_LVL3_LAT 0x0096
+#define FLUSH_SIZE 0x0400
+#define FLUSH_STRIDE 0x0010
+#define DUTY_OFFSET 0x01
+#define DUTY_WIDTH 0x03
+#define DAY_ALRM 0x0D
+#define MON_ALRM 0x00
+#define CENTURY 0x32
+#define FLAG (EFI_ACPI_5_0_WBINVD | EFI_ACPI_5_0_SLP_BUTTON | EFI_ACPI_5_0_RESET_REG_SUP | EFI_ACPI_5_0_RTC_S4)
+#define IAPC_BOOT_ARCH (EFI_ACPI_5_0_8042 | EFI_ACPI_5_0_LEGACY_DEVICES)
+#define RESERVED 0x00
+
+#endif
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AcpiTables.inf b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AcpiTables.inf new file mode 100644 index 0000000000..1e456e3405 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/AcpiTables.inf @@ -0,0 +1,46 @@ +## @file
+# Component information file for the ACPI tables.
+#
+# Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = AcpiTables
+ FILE_GUID = 7E374E25-8E01-4FEE-87F2-390C23C606CD
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+ EDK_RELEASE_VERSION = 0x00020000
+ EFI_SPECIFICATION_VERSION = 0x00020000
+
+[sources.common]
+ DSDT.ASL
+ Facs/Facs.aslc
+ Facp/Facp.aslc
+ Madt/Madt30.aslc
+ Mcfg/Mcfg.aslc
+ Hpet/Hpet.aslc
+ Dmar/Dmar.aslc
+ Dmar/Dmar.h
+ Lpit/Lpit.aslc
+ Lpit/Lpit.h
+ SsdtRtd3/RvpRtd3.asl
+ DBG2/DBG2.aslc
+ DBGP/DBGP.aslc
+ DptfAcpiTable/Dptf.asl
+ UsbTypeC/UsbTypeC.asl
+ Wsmt/Wsmt.act
+
+[Packages]
+ MdePkg/MdePkg.dec
+ BroxtonPlatformPkg/PlatformPkg.dec
+ BroxtonSiPkg/BroxtonSiPkg.dec
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Bxt.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Bxt.asl new file mode 100644 index 0000000000..aa06bda436 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Bxt.asl @@ -0,0 +1,64 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope (\_SB.PCI0) {
+ //
+ // Integrated Sensor Hub - Device 17, Function 0
+ //
+ Device(ISH0) {
+ Name(_ADR, 0x00110000)
+ Method (_STA, 0, NotSerialized) {
+ Return (0x0F)
+ }
+
+ //--------------------
+ // Intel Proprietary Wake up Event solution
+ //--------------------
+ Method(_DSM, 0x4, Serialized)
+ {
+ If (LEqual(Arg0, ToUUID("1730E71D-E5DD-4A34-BE57-4D76B6A2FE37"))) {
+ // Function 0 : Query Function
+ If (LEqual(Arg2, Zero)) {
+ // Revision 0
+ If (LEqual(Arg1, Zero)) {
+ Return(Buffer(One) { 0x03 }) // There are 1 function defined other than Query.
+ } Else {
+ Return(0) // Revision mismatch
+ }
+ }
+ // Function 1 :
+ If (LEqual(Arg2, One)) {
+ Store(DerefOf(Index(Arg3, Zero)), Local0)
+ If (LEqual(Local0, Zero)) {
+
+ } Else {
+ //Handle sleep, dock, un-dock events here
+ }
+ Return(0)
+ } Else {
+ Return(0) // Function number mismatch but normal return.
+ }
+ } Else {
+ Return(Buffer(One) { 0x00 }) // Guid mismatch
+ }
+ }
+
+ Method (_PS0, 0, NotSerialized) { // _PS0: Power State 0
+ }
+
+ Method (_PS3, 0, NotSerialized) { // _PS3: Power State 3
+ }
+ }
+
+}//end scope
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/BxtPGpioDefine.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/BxtPGpioDefine.asl new file mode 100644 index 0000000000..69b8ec2fb3 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/BxtPGpioDefine.asl @@ -0,0 +1,274 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _BXTP_GPIO_DEFINE_ASL_
+#define _BXTP_GPIO_DEFINE_ASL_
+
+//
+// GPIO pad and offset definition as GPIO HAS
+// North community GPIO pad definition
+//
+#define N_GPIO_0 0x00C50500 //GPIO_0
+#define N_GPIO_1 0x00C50508 //GPIO_1
+#define N_GPIO_2 0x00C50510 //GPIO_2
+#define N_GPIO_3 0x00C50518 //GPIO_3
+#define N_GPIO_4 0x00C50520 //GPIO_4
+#define N_GPIO_5 0x00C50528 //GPIO_5
+#define N_GPIO_6 0x00C50530 //GPIO_6
+#define N_GPIO_7 0x00C50538 //GPIO_7
+#define N_GPIO_8 0x00C50540 //GPIO_8
+#define N_GPIO_9 0x00C50548 //GPIO_9
+#define N_GPIO_10 0x00C50550 //GPIO_10
+#define N_GPIO_11 0x00C50558 //GPIO_11
+#define N_GPIO_12 0x00C50560 //GPIO_12
+#define N_GPIO_13 0x00C50568 //GPIO_13
+#define N_GPIO_14 0x00C50570 //GPIO_14
+#define N_GPIO_15 0x00C50578 //GPIO_15
+#define N_GPIO_16 0x00C50580 //GPIO_16
+#define N_GPIO_17 0x00C50588 //GPIO_17
+#define N_GPIO_18 0x00C50590 //GPIO_18
+#define N_GPIO_19 0x00C50598 //GPIO_19
+#define N_GPIO_20 0x00C505A0 //GPIO_20
+#define N_GPIO_21 0x00C505A8 //GPIO_21
+#define N_GPIO_22 0x00C505B0 //GPIO_22
+#define N_GPIO_23 0x00C505B8 //GPIO_23
+#define N_GPIO_24 0x00C505C0 //GPIO_24
+#define N_GPIO_25 0x00C505C8 //GPIO_25
+#define N_GPIO_26 0x00C505D0 //GPIO_26
+#define N_GPIO_27 0x00C505D8 //GPIO_27
+#define N_GPIO_28 0x00C505E0 //GPIO_28
+#define N_GPIO_29 0x00C505E8 //GPIO_29
+#define N_GPIO_30 0x00C505F0 //GPIO_30
+#define N_GPIO_31 0x00C505F8 //GPIO_31
+#define N_GPIO_32 0x00C50600 //GPIO_32
+#define N_GPIO_33 0x00C50608 //GPIO_33
+#define N_GPIO_34 0x00C50610 //PWM0
+#define N_GPIO_35 0x00C50618 //PWM1
+#define N_GPIO_36 0x00C50620 //PWM2
+#define N_GPIO_37 0x00C50628 //PWM3
+#define N_GPIO_38 0x00C50630 //LPSS_UART0_RXD
+#define N_GPIO_39 0x00C50638 //LPSS_UART0_TXD
+#define N_GPIO_40 0x00C50640 //LPSS_UART0_RTS_B
+#define N_GPIO_41 0x00C50648 //LPSS_UART0_CTS_B
+#define N_GPIO_42 0x00C50650 //LPSS_UART1_RXD
+#define N_GPIO_43 0x00C50658 //LPSS_UART1_TXD
+#define N_GPIO_44 0x00C50660 //LPSS_UART1_RTS_B
+#define N_GPIO_45 0x00C50668 //LPSS_UART1_CTS_B
+#define N_GPIO_46 0x00C50670 //LPSS_UART2_RXD
+#define N_GPIO_47 0x00C50678 //LPSS_UART2_TXD
+#define N_GPIO_48 0x00C50680 //LPSS_UART2_RTS_B
+#define N_GPIO_49 0x00C50688 //LPSS_UART2_CTS_B
+#define N_GPIO_62 0x00C50690 //GP_CAMERASB00
+#define N_GPIO_63 0x00C50698 //GP_CAMERASB01
+#define N_GPIO_64 0x00C506A0 //GP_CAMERASB02
+#define N_GPIO_65 0x00C506A8 //GP_CAMERASB03
+#define N_GPIO_66 0x00C506B0 //GP_CAMERASB04
+#define N_GPIO_67 0x00C506B8 //GP_CAMERASB05
+#define N_GPIO_68 0x00C506C0 //GP_CAMERASB06
+#define N_GPIO_69 0x00C506C8 //GP_CAMERASB07
+#define N_GPIO_70 0x00C506D0 //GP_CAMERASB08
+#define N_GPIO_71 0x00C506D8 //GP_CAMERASB09
+#define N_GPIO_72 0x00C506E0 //GP_CAMERASB10
+#define N_GPIO_73 0x00C506E8 //GP_CAMERASB11
+#define N_TCK 0x00C506F0 //TCK
+#define N_TRST_B 0x00C506F8 //TRST_B
+#define N_TMS 0x00C50700 //TMS
+#define N_TDI 0x00C50708 //TDI
+#define N_CX_PMODE 0x00C50710 //CX_PMODE
+#define N_CX_PREQ_B 0x00C50718 //CX_PREQ_B
+#define N_JTAGX 0x00C50720 //JTAGX
+#define N_CX_PRDY_B 0x00C50728 //CXPRDY_B
+#define N_TDO 0x00C50730 //TDO
+#define N_CNV_BRI_DT 0x00C50738 //CNV_BRI_DT
+#define N_CNV_BRI_RSP 0x00C50740 //CNV_BRI_RSP
+#define N_CNV_RGI_DT 0x00C50748 //CNV_RGI_DT
+#define N_CNV_RGI_RSP 0x00C50750 //CNV_RGI_RSP
+#define N_SVID0_ALERT_B 0x00C50758 //SVID0_ALERT_B
+#define N_SVID0_DATA 0x00C50760 //SVID0_DATA
+#define N_SVID0_CLK 0x00C50768 //SVID0_CLK
+
+// Northwest community GPIO pad definition
+#define NW_GPIO_187 0x00C40500 //HV_DDI0_DDC_SDA
+#define NW_GPIO_188 0x00C40508 //HV_DDI0_DDC_SCL
+#define NW_GPIO_189 0x00C40510 //HV_DDI1_DDC_SDA
+#define NW_GPIO_190 0x00C40518 //HV_DDI1_DDC_SCL
+#define NW_GPIO_191 0x00C40520 //DBI_SDA
+#define NW_GPIO_192 0x00C40528 //DBI_SCL
+#define NW_GPIO_193 0x00C40530 //PANEL0_VDDEN
+#define NW_GPIO_194 0x00C40538 //PANEL0_BKLTEN
+#define NW_GPIO_195 0x00C40540 //PANEL0_BKLTCTL
+#define NW_GPIO_196 0x00C40548 //PANEL1_VDDEN
+#define NW_GPIO_197 0x00C40550 //PANEL1_BKLTEN
+#define NW_GPIO_198 0x00C40558 //PANEL1_BKLTCTL
+#define NW_GPIO_199 0x00C40560 //DBI_CSX
+#define NW_GPIO_200 0x00C40568 //DBI_RESX
+#define NW_GPIO_201 0x00C40570 //GP_INTD_DSI_TE1
+#define NW_GPIO_202 0x00C40578 //GP_INTD_DSI_TE2
+#define NW_GPIO_203 0x00C40580 //USB_OC0_B
+#define NW_GPIO_204 0x00C40588 //USB_OC1_B
+#define NW_PMC_SPI_FS0 0x00C40590 //PMC_SPI_FS0
+#define NW_PMC_SPI_FS1 0x00C40598 //PMC_SPI_FS1
+#define NW_PMC_SPI_FS2 0x00C405A0 //PMC_SPI_FS2
+#define NW_PMC_SPI_RXD 0x00C405A8 //PMC_SPI_RXD
+#define NW_PMC_SPI_TXD 0x00C405B0 //PMC_SPI_TXD
+#define NW_PMC_SPI_CLK 0x00C405B8 //PMC_SPI_CLK
+#define NW_PMIC_PWRGOOD 0x00C405C0 //PMIC_PWRGOOD
+#define NW_PMIC_RESET_B 0x00C405C8 //PMIC_RESET_B
+#define NW_GPIO_213 0x00C405D0 //PMIC_SDWN_B
+#define NW_GPIO_214 0x00C405D8 //PMIC_BCUDISW2
+#define NW_GPIO_215 0x00C405E0 //PMIC_BCUDISCRIT
+#define NW_PMIC_THERMTRIP_B 0x00C405E8 //PMIC_THERMTRIP_B
+#define NW_PMIC_STDBY 0x00C405F0 //PMIC_STDBY
+#define NW_PROCHOT_B 0x00C405F8 //PROCHOT_B
+#define NW_PMIC_I2C_SCL 0x00C40600 //PMIC_I2C_SCL
+#define NW_PMIC_I2C_SDA 0x00C40608 //PMIC_I2C_SDA
+#define NW_GPIO_74 0x00C40610 //AVS_I2S1_MCLK
+#define NW_GPIO_75 0x00C40618 //AVS_I2S1_BCLK
+#define NW_GPIO_76 0x00C40620 //AVS_I2S1_WS_SYNC
+#define NW_GPIO_77 0x00C40628 //AVS_I2S1_SDI
+#define NW_GPIO_78 0x00C40630 //AVS_I2S1_SDO
+#define NW_GPIO_79 0x00C40638 //AVS_M_CLK_A1
+#define NW_GPIO_80 0x00C40640 //AVS_M_CLK_B1
+#define NW_GPIO_81 0x00C40648 //AVS_M_DATA_1
+#define NW_GPIO_82 0x00C40650 //AVS_M_CLK_AB2
+#define NW_GPIO_83 0x00C40658 //AVS_M_DATA_2
+#define NW_GPIO_84 0x00C40660 //AVS_I2S2_MCLK
+#define NW_GPIO_85 0x00C40668 //AVS_I2S2_BCLK
+#define NW_GPIO_86 0x00C40670 //AVS_I2S2_WS_SYNC
+#define NW_GPIO_87 0x00C40678 //AVS_I2S2_SDI
+#define NW_GPIO_88 0x00C40680 //AVS_I2S2_SDO
+#define NW_GPIO_89 0x00C40688 //AVS_I2S3_BCLK
+#define NW_GPIO_90 0x00C40690 //AVS_I2S3_WS_SYNC
+#define NW_GPIO_91 0x00C40698 //AVS_I2S3_SDI
+#define NW_GPIO_92 0x00C406A0 //AVS_I2S3_SDO
+#define NW_GPIO_97 0x00C406A8 //FST_SPI_CS0_B
+#define NW_GPIO_98 0x00C406B0 //FST_SPI_CS1_B
+#define NW_GPIO_99 0x00C406B8 //FST_SPI_MOSI_IO0
+#define NW_GPIO_100 0x00C406C0 //FST_SPI_MISO_IO1
+#define NW_GPIO_101 0x00C406C8 //FST_SPI_IO2
+#define NW_GPIO_102 0x00C406D0 //FST_SPI_IO3
+#define NW_GPIO_103 0x00C406D8 //FST_SPI_CLK
+#define NW_FST_SPI_CLK_FB 0x00C406E0 //FST_SPI_CLK_FB
+#define NW_GPIO_104 0x00C406E8 //GP_SSP_0_CLK
+#define NW_GPIO_105 0x00C406F0 //GP_SSP_0_FS0
+#define NW_GPIO_106 0x00C406F8 //GP_SSP_0_FS1
+#define NW_GPIO_109 0x00C40700 //GP_SSP_0_RXD
+#define NW_GPIO_110 0x00C40708 //GP_SSP_0_TXD
+#define NW_GPIO_111 0x00C40710 //GP_SSP_1_CLK
+#define NW_GPIO_112 0x00C40718 //GP_SSP_1_FS0
+#define NW_GPIO_113 0x00C40720 //GP_SSP_1_FS1
+#define NW_GPIO_116 0x00C40728 //GP_SSP_1_RXD
+#define NW_GPIO_117 0x00C40730 //GP_SSP_1_TXD
+#define NW_GPIO_118 0x00C40738 //GP_SSP_2_CLK
+#define NW_GPIO_119 0x00C40740 //GP_SSP_2_FS0
+#define NW_GPIO_120 0x00C40748 //GP_SSP_2_FS1
+#define NW_GPIO_121 0x00C40750 //GP_SSP_2_FS2
+#define NW_GPIO_122 0x00C40758 //GP_SSP_2_RXD
+#define NW_GPIO_123 0x00C40760 //GP_SSP_2_TXD
+
+// West community GPIO pad definition
+#define W_GPIO_124 0x00C70500 //LPSS_I2S0_SDA
+#define W_GPIO_125 0x00C70508 //LPSS_I2S0_SCL
+#define W_GPIO_126 0x00C70510 //LPSS_I2S1_SDA
+#define W_GPIO_127 0x00C70518 //LPSS_I2S1_SCL
+#define W_GPIO_128 0x00C70520 //LPSS_I2S2_SDA
+#define W_GPIO_129 0x00C70528 //LPSS_I2S2_SCL
+#define W_GPIO_130 0x00C70530 //LPSS_I2S3_SDA
+#define W_GPIO_131 0x00C70538 //LPSS_I2S3_SCL
+#define W_GPIO_132 0x00C70540 //LPSS_I2S4_SDA
+#define W_GPIO_133 0x00C70548 //LPSS_I2S4_SCL
+#define W_GPIO_134 0x00C70550 //LPSS_I2S5_SDA
+#define W_GPIO_135 0x00C70558 //LPSS_I2S5_SCL
+#define W_GPIO_136 0x00C70560 //LPSS_I2S6_SDA
+#define W_GPIO_137 0x00C70568 //LPSS_I2S6_SCL
+#define W_GPIO_138 0x00C70570 //LPSS_I2S7_SDA
+#define W_GPIO_139 0x00C70578 //LPSS_I2S7_SCL
+#define W_GPIO_146 0x00C70580 //ISH_GPIO_0
+#define W_GPIO_147 0x00C70588 //ISH_GPIO_1
+#define W_GPIO_148 0x00C70590 //ISH_GPIO_2
+#define W_GPIO_149 0x00C70598 //ISH_GPIO_3
+#define W_GPIO_150 0x00C705a0 //ISH_GPIO_4
+#define W_GPIO_151 0x00C705a8 //ISH_GPIO_5
+#define W_GPIO_152 0x00C705b0 //ISH_GPIO_6
+#define W_GPIO_153 0x00C705b8 //ISH_GPIO_7
+#define W_GPIO_154 0x00C705c0 //ISH_GPIO_8
+#define W_GPIO_155 0x00C705c8 //ISH_GPIO_9
+#define W_GPIO_209 0x00C705d0 //PCIE_CLKREQ0_B
+#define W_GPIO_210 0x00C705d8 //PCIE_CLKREQ1_B
+#define W_GPIO_211 0x00C705e0 //PCIE_CLKREQ2_B
+#define W_GPIO_212 0x00C705e8 //PCIE_CLKREQ3_B
+#define W_OSC_CLK_OUT_0 0x00C705f0 //OSC_CLK_OUT0
+#define W_OSC_CLK_OUT_1 0x00C705f8 //OSC_CLK_OUT1
+#define W_OSC_CLK_OUT_2 0x00C70600 //OSC_CLK_OUT2
+#define W_OSC_CLK_OUT_3 0x00C70608 //OSC_CLK_OUT3
+#define W_OSC_CLK_OUT_4 0x00C70610 //OSC_CLK_OUT4
+#define W_PMU_AC_PRESENT 0x00C70618 //PMU_AC_PRESENT
+#define W_PMU_BATLOW_B 0x00C70620 //PMU_BATLOW_B
+#define W_PMU_PLTRST_B 0x00C70628 //PMU_PLTRST_B
+#define W_PMU_PWRBTN_B 0x00C70630 //PMU_PWRBTN_B
+#define W_PMU_RESETBUTTON_B 0x00C70638 //PMU_RESETBUTTON_B
+#define W_PMU_SLP_S0_B 0x00C70640 //PMU_SLP_S0_B
+#define W_PMU_SLP_S3_B 0x00C70648 //PMU_SLP_S3_B
+#define W_PMU_SLP_S4_B 0x00C70650 //PMU_SLP_S4_B
+#define W_PMU_SUSCLK 0x00C70658 //PMU_SUSCLK
+#define W_PMU_WAKE_B 0x00C70660 //PMU_WAKE_B
+#define W_SUS_STAT_B 0x00C70668 //SUS_STAT_B
+#define W_SUSPWRDNACK 0x00C70670 //SUSPWRDNACK
+
+// Southwest community GPIO pad definition
+#define SW_GPIO_205 0x00C00500 //PCIE_WAKE0_B
+#define SW_GPIO_206 0x00C00508 //PCIE_WAKE1_B
+#define SW_GPIO_207 0x00C00510 //PCIE_WAKE2_B
+#define SW_GPIO_208 0x00C00518 //PCIE_WAKE3_B
+#define SW_GPIO_156 0x00C00520 //EMMC0_CLK
+#define SW_GPIO_157 0x00C00528 //EMMC0_D0
+#define SW_GPIO_158 0x00C00530 //EMMC0_D1
+#define SW_GPIO_159 0x00C00538 //EMMC0_D2
+#define SW_GPIO_160 0x00C00540 //EMMC0_D3
+#define SW_GPIO_161 0x00C00548 //EMMC0_D4
+#define SW_GPIO_162 0x00C00550 //EMMC0_D5
+#define SW_GPIO_163 0x00C00558 //EMMC0_D6
+#define SW_GPIO_164 0x00C00560 //EMMC0_D7
+#define SW_GPIO_165 0x00C00568 //EMMC0_CMD0
+#define SW_GPIO_166 0x00C00570 //SDIO_CLK
+#define SW_GPIO_167 0x00C00578 //SDIO_D0
+#define SW_GPIO_168 0x00C00580 //SDIO_D1
+#define SW_GPIO_169 0x00C00588 //SDIO_D2
+#define SW_GPIO_170 0x00C00590 //SDIO_D3
+#define SW_GPIO_171 0x00C00598 //SDIO_CMD
+#define SW_GPIO_172 0x00C005A0 //SDCARD_CLK
+#define SW_GPIO_179 0x00C005A8 //SDCARD_CLK_FB
+#define SW_GPIO_173 0x00C005B0 //SDCARD_D0
+#define SW_GPIO_174 0x00C005B8 //SDCARD_D1
+#define SW_GPIO_175 0x00C005C0 //SDCARD_D2
+#define SW_GPIO_176 0x00C005C8 //SDCARD_D3
+#define SW_GPIO_177 0x00C005D0 //SDCARD_CD_B
+#define SW_GPIO_178 0x00C005D8 //SDCARD_CMD
+#define SW_GPIO_186 0x00C005E0 //SDCARD_LVL_WP
+#define SW_GPIO_182 0x00C005E8 //EMMC0_STROBE
+#define SW_GPIO_183 0x00C005F0 //SDIO_PWR_DOWN_B
+#define SW_SMB_ALERTB 0x00C005F8 //SMB_ALERTB
+#define SW_SMB_CLK 0x00C00600 //SMB_CLK
+#define SW_SMB_DATA 0x00C00608 //SMB_DATA
+#define SW_LPC_ILB_SERIRQ 0x00C00610 //LPC_ILB_SERIRQ
+#define SW_LPC_CLKOUT0 0x00C00618 //LPC_CLKOUT0
+#define SW_LPC_CLKOUT1 0x00C00620 //LPC_CLKOUT1
+#define SW_LPC_AD0 0x00C00628 //LPC_AD0
+#define SW_LPC_AD1 0x00C00630 //LPC_AD1
+#define SW_LPC_AD2 0x00C00638 //LPC_AD2
+#define SW_LPC_AD3 0x00C00640 //LPC_AD3
+#define SW_LPC_CLKRUN 0x00C00648 //LPC_CLKRUN
+#define SW_LPC_FRAMEB 0x00C00650 //LPC_FRAMEB
+
+#endif
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/CPU.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/CPU.asl new file mode 100644 index 0000000000..982f2475d2 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/CPU.asl @@ -0,0 +1,44 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ // NOTE: The _PDC Implementation is out of the scope of this
+ // reference code. Please see the latest Hyper-Threading Technology
+ // Reference Code for complete implementation details.
+
+ Scope(\_PR)
+ {
+ Processor(CPU0, // Unique name for Processor 0.
+ 1, // Unique ID for Processor 0.
+ 0x00, // CPU0 ACPI P_BLK address = ACPIBASE + 10h.
+ 0) // CPU0 ICH7M P_BLK length = 6 bytes.
+ {}
+
+ Processor(CPU1, // Unique name for Processor 1.
+ 2, // Unique ID for Processor 1.
+ 0x00,
+ 0) // CPU1 P_BLK length = 6 bytes.
+ {}
+
+ Processor(CPU2, // Unique name for Processor 2.
+ 3, // Unique ID for Processor 2.
+ 0x00,
+ 0) // CPU2 P_BLK length = 6 bytes.
+ {}
+
+ Processor(CPU3, // Unique name for Processor 3.
+ 4, // Unique ID for Processor 3.
+ 0x00,
+ 0) // CPU3 P_BLK length = 6 bytes.
+ {}
+ } // End _PR
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/CSRT.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/CSRT.aslc new file mode 100644 index 0000000000..99d16ff017 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/CSRT.aslc @@ -0,0 +1,221 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "acpitablePlatform.h"
+#include "Csrt.h"
+
+//
+// Debug Port Table
+//
+EFI_ACPI_CSRT_TABLE Csrt =
+{
+ { //EFI_ACPI_DESCRIPTION_HEADER Start
+ EFI_ACPI_4_0_CORE_SYSTEM_RESOURCE_TABLE_SIGNATURE,
+ sizeof(EFI_ACPI_CSRT_TABLE),
+ EFI_ACPI_CSRT_TABLE_REVISION,
+ 0, // to make sum of entire table == 0
+ EFI_ACPI_OEM_ID, // OEMID is a 6 bytes long field
+ EFI_ACPI_OEM_TABLE_ID, // OEM table identification(8 bytes long)
+ EFI_ACPI_OEM_REVISION, // OEM revision
+ EFI_ACPI_CREATOR_ID, // ASL compiler vendor ID
+ EFI_ACPI_CREATOR_REVISION // ASL compiler revision number
+ }, //EFI_ACPI_DESCRIPTION_HEADER End
+ {
+ //
+ // LPIO1 DMA RESOURCE_GROUP_INFO1
+ //
+ { //RESOURCE_GROUP_HEADER Start
+ sizeof(RESOURCE_GROUP_INFO1),// sizeof(RESOURCE_GROUP_INFO)
+ 0x4C544E49,
+ 0x00000000,
+ 0x0004,
+ 0x0000,
+ 0x0001,
+ 0x0000,
+ sizeof(SHARED_INFO_SECTION),
+ {
+ // Shared Info Section
+ 0x0001, // Major Version 1
+ 0x0000, // Minor Version 0
+ 0x55AA55AA, // MMIO Base - Low Part
+ 0x00000000, // MMIO Base - High Part
+ 0x0000002A, // Interrupt GSI 42
+ 0x02, // Interrupt Polarity
+ 0x00, // Interrupt Mode
+ 0x06, // Number of Channels
+ 0x20, // DMA Address Width
+ 0x0000, // Base Request Line
+ 0x0010, // Number of Handshake Signals
+ 0x0001000 // Maximum Block Transfer Size
+ },
+ }, // End of Resource Group header
+ {
+ {
+ // Controller 0
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0001, // Resource Type
+ 0x20495053 // UID - SPI
+ },
+ {
+ // Channel 0
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x30414843 // UID - CHA0
+ },
+ {
+ // Channel 1
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x31414843 // UID - CHA1
+ },
+ {
+ // Channel 2
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x32414843 // UID - CHA2
+ },
+ {
+ // Channel 3
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x33414843 // UID - CHA3
+ },
+ {
+ // Channel 4
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x34414843 // UID - CHA4
+ },
+ {
+ // Channel 5
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x35414843 // UID - CHA5
+ }
+ }
+ },
+ {
+ //
+ // LPIO2 DMA RESOURCE_GROUP_INFO2
+ //
+ { //RESOURCE_GROUP_HEADER Start
+ sizeof(RESOURCE_GROUP_INFO2),// sizeof(RESOURCE_GROUP_INFO)
+ 0x4C544E49,
+ 0x00000000,
+ 0x0005,
+ 0x0000,
+ 0x0001,
+ 0x0000,
+ sizeof(SHARED_INFO_SECTION),
+ {
+ // Shared Info Section
+ 0x0001, // Major Version 1
+ 0x0000, // Minor Version 0
+ 0x55AA55AA, // MMIO Base - Low Part
+ 0x00000000, // MMIO Base - High Part
+ 0x0000002B, // Interrupt GSI 43
+ 0x02, // Interrupt Polarity
+ 0x00, // Interrupt Mode
+ 0x08, // Number of Channels
+ 0x20, // DMA Address Width
+ 0x0010, // Base Request Line
+ 0x0010, // Number of Handshake Signals
+ 0x0001000 // Maximum Block Transfer Size
+ },
+ }, // End of Resource Group header
+ {
+ {
+ // Controller 0
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0001, // Resource Type
+ 0x20433249 // UID - I2C
+ },
+ {
+ // Channel 0
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x30414843 // UID - CHA0
+ },
+ {
+ // Channel 1
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x31414843 // UID - CHA1
+ },
+ {
+ // Channel 2
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x32414843 // UID - CHA2
+ },
+ {
+ // Channel 3
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x33414843 // UID - CHA3
+ },
+ {
+ // Channel 4
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x34414843 // UID - CHA4
+ },
+ {
+ // Channel 5
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x35414843 // UID - CHA5
+ },
+ {
+ // Channel 6
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x36414843 // UID - CHA6
+ },
+ {
+ // Channel 7
+ 0x0000000C, // Resource Descriptor Length
+ 0x0003, // Resource Type
+ 0x0000, // Resource Type
+ 0x37414843 // UID - CHA7
+ }
+ }
+ }//LPIO2 DMA RESOURCE_GROUP_INFO2 End
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&Csrt;
+}
\ No newline at end of file diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Csrt.h b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Csrt.h new file mode 100644 index 0000000000..4802acbbb1 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Csrt.h @@ -0,0 +1,82 @@ +/** @file
+ The header file of CSRT.
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#define EFI_ACPI_CSRT_TABLE_REVISION 0x00000000
+#define NUMBER_RESOURCE_GROUP_INFO 1 //2
+#define MAX_NO_CHANNEL1_SUPPORTED 7
+#define MAX_NO_CHANNEL2_SUPPORTED 9
+#define NAMESPACE_STRING_MAX_LENGTH 16
+
+//
+// Ensure proper structure formats
+//
+#pragma pack (1)
+
+
+typedef struct _SHARED_INFO_SECTION {
+ UINT16 MajVersion;
+ UINT16 MinVersion;
+ UINT32 MMIOLowPart;
+ UINT32 MMIOHighPart;
+ UINT32 IntGSI;
+ UINT8 IntPol;
+ UINT8 IntMode;
+ UINT8 NoOfCh;
+ UINT8 DMAAddressWidth;
+ UINT16 BaseReqLine;
+ UINT16 NoOfHandSig;
+ UINT32 MaxBlockTransferSize;
+} SHARED_INFO_SECTION;
+
+typedef struct _RESOURCE_GROUP_HEADER {
+ UINT32 Length;
+ UINT32 VendorId;
+ UINT32 SubVendorId;
+ UINT16 DeviceId;
+ UINT16 SubDeviceId;
+ UINT16 Revision;
+ UINT16 Reserved;
+ UINT32 SharedInfoLength;
+ SHARED_INFO_SECTION SharedInfoSection;
+} RESOURCE_GROUP_HEADER;
+
+typedef struct _RESOURCE_DESCRIPTOR {
+ UINT32 Length;
+ UINT16 ResourceType;
+ UINT16 ResourceSubType;
+ UINT32 UUID;
+} RESOURCE_DESCRIPTOR;
+
+typedef struct {
+ RESOURCE_GROUP_HEADER ResourceGroupHeaderInfo;
+ RESOURCE_DESCRIPTOR ResourceDescriptorInfo[MAX_NO_CHANNEL1_SUPPORTED];
+} RESOURCE_GROUP_INFO1;
+
+typedef struct {
+ RESOURCE_GROUP_HEADER ResourceGroupHeaderInfo;
+ RESOURCE_DESCRIPTOR ResourceDescriptorInfo[MAX_NO_CHANNEL2_SUPPORTED];
+} RESOURCE_GROUP_INFO2;
+
+//
+// DBGP structure
+//
+typedef struct {
+ EFI_ACPI_DESCRIPTION_HEADER Header;
+ RESOURCE_GROUP_INFO1 ResourceGroupsInfo1;
+ RESOURCE_GROUP_INFO2 ResourceGroupsInfo2;
+} EFI_ACPI_CSRT_TABLE;
+
+#pragma pack ()
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DBG2/DBG2.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DBG2/DBG2.aslc new file mode 100644 index 0000000000..9e6ad8023b --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DBG2/DBG2.aslc @@ -0,0 +1,77 @@ +/** @file
+ Debug Port Table 2
+
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "AcpiTablePlatform.h"
+#include <Dbg2t.h>
+#include <PiDxe.h>
+
+//
+// Debug Port Table
+//
+EFI_ACPI_DEBUG_PORT_2_TABLE Dbg2 = {
+ {
+ EFI_ACPI_5_0_DEBUG_PORT_2_TABLE_SIGNATURE,
+ sizeof(EFI_ACPI_DEBUG_PORT_2_TABLE),
+ EFI_ACPI_OEM_DBG2_TABLE_REVISION,
+ 0, // to make sum of entire table == 0
+ EFI_ACPI_OEM_ID, // OEMID is a 6 bytes long field
+ EFI_ACPI_OEM_TABLE_ID_2, // OEM table identification(8 bytes long)
+ EFI_ACPI_OEM_REVISION, // OEM revision
+ EFI_ACPI_CREATOR_ID, // ASL compiler vendor ID
+ EFI_ACPI_CREATOR_REVISION // ASL compiler revision number
+ },
+ OFFSET_OF (EFI_ACPI_DEBUG_PORT_2_TABLE, DbgDeviceInfoCom1),
+ NUMBER_DBG_DEVICE_INFO,
+ //
+ // LPSS-UART
+ //
+ {
+ DEBUG_DEVICE_INFORMATION_REVISION,
+ sizeof(DEBUG_DEVICE_INFORMATION),
+ 1, // NumberOfGenericAddressRegisters
+ NAMESPACE_STRING_MAX_LENGTH,
+ OFFSET_OF (DEBUG_DEVICE_INFORMATION, NamespaceString),
+ 0, // OemDataLength
+ 0, // OemDataOffset
+ 0x8000, // PortType - Serial
+ 0x0000, // PortSubtype - 16550 compatible
+ 0, // Reserved
+ OFFSET_OF (DEBUG_DEVICE_INFORMATION, BaseAddressRegister),
+ OFFSET_OF (DEBUG_DEVICE_INFORMATION, AddressSize),
+ {
+ 0x00, // Address_Space_ID = 0 System Memory, 1 System IO
+ 0x08, // Register_Bit_Width = 8 bits
+ 0x00, // Register_Bit_offset
+ 0x00, // Access size
+ 0x00000000 // Base address of COM1. NOTE: Updated in AcpiPlatform.
+ },
+ {
+ sizeof (EFI_ACPI_2_0_GENERIC_ADDRESS_STRUCTURE)
+ },
+ ".",
+ }
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&Dbg2;
+}
\ No newline at end of file diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DBGP/DBGP.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DBGP/DBGP.aslc new file mode 100644 index 0000000000..2f8dab3951 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DBGP/DBGP.aslc @@ -0,0 +1,57 @@ +/** @file
+ ACPI DBGP table
+
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// Statements that include other files
+//
+#include "Dbgp.h"
+
+EFI_ACPI_DEBUG_PORT_DESCRIPTION_TABLE Dbgp = {
+ EFI_ACPI_3_0_DEBUG_PORT_TABLE_SIGNATURE,
+ sizeof (EFI_ACPI_DEBUG_PORT_DESCRIPTION_TABLE),
+ EFI_ACPI_DBGP_TABLE_REVISION,
+ 0x00, // Checksum will be updated at runtime
+ ' ', // OEMID 6 BYTES - It is expected that these values will be updated at runtime
+ ' ', // OEMID 6 BYTES - It is expected that these values will be updated at runtime
+ ' ', // OEMID 6 BYTES - It is expected that these values will be updated at runtime
+ ' ', // OEMID 6 BYTES - It is expected that these values will be updated at runtime
+ ' ', // OEMID 6 BYTES - It is expected that these values will be updated at runtime
+ ' ', // OEMID 6 BYTES - It is expected that these values will be updated at runtime
+ 0, // OEM TABLE ID 8 BYTES -
+ EFI_ACPI_OEM_DBGP_REVISION, // OEM REVISION
+ 0, // CREATOR ID
+ 0, // CREATOR REVISION
+ 0, // Interfacetype, 0 = full 16550 interface
+ {0}, // Reserved 3 bytes, must be 0.
+ {
+ 0,
+ 0x08, // RegisterBitWidth
+ 0, // RegisterBitOffset
+ 0x00,
+ 0x00
+ } // Base address. Put actual value later.
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from removing the
+ // data structure from the exeutable
+ //
+ return (VOID*)&Dbgp;
+}
\ No newline at end of file diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DSDT.ASL b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DSDT.ASL new file mode 100644 index 0000000000..49b018c536 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DSDT.ASL @@ -0,0 +1,95 @@ +/** @file
+ ACPI DSDT table
+
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+DefinitionBlock (
+ "DSDT.aml",
+ "DSDT",
+ 0x02, // DSDT revision.
+ // A Revision field value greater than or equal to 2 signifies that integers
+ // Declared within the Definition Block are to be evaluated as 64-bit values
+ "INTEL", // OEM ID (6 byte string)
+ "BXT-SOC", // OEM table ID (8 byte string)
+ 0x0 // OEM version of DSDT table (4 byte Integer)
+ )
+
+{
+ External(\_SB.PCI0.GFX0, DeviceObj)
+// Miscellaneous services enabled in Project
+ include ("token.asl")
+ Include ("AMLUPD.asl")
+ include ("GloblNvs.asl")
+ include ("PciTree.asl")
+ include ("Sc.asl")
+ include ("LpcB.asl")
+ include ("Bxt.asl")
+ include ("CPU.asl")
+ include ("Platform.asl")
+ include ("THERMAL.ASL")
+ include ("PCI_DRC.ASL")
+ include ("Video.asl")
+ Include ("PcieRpPxsxWrapper.asl")
+ include ("Pep/Pep.asl")
+ include ("Gpe.asl") //Need this for xHCI D3 wake flow.
+
+ if (LEqual(ECR1,1)) {
+ Scope(\_SB.PCI0) {
+ //
+ // PCI-specific method's GUID
+ //
+ Name(PCIG, ToUUID("E5C937D0-3553-4d7a-9117-EA4D19C3434D"))
+ Method(PCID, 4, Serialized) {
+ If (LEqual(Arg0, PCIG)) { // PCIE capabilities UUID
+ If (LGreaterEqual(Arg1,3)) { // revision at least 3
+ If (LEqual(Arg2,0)) { Return (Buffer(2){0x01,0x03}) } // function 0: list of supported functions
+ If (LEqual(Arg2,8)) { Return (1) } // function 8: Avoiding Power-On Reset Delay Duplication on Sx Resume
+ If (LEqual(Arg2,9)) { Return (Package(5){50000,Ones,Ones,50000,Ones}) } // function 9: Specifying Device Readiness Durations
+ }
+ }
+ return (Buffer(1){0})
+ }
+ } //scope
+ } //if
+
+ Scope(\_SB.PCI0) {
+ //PciCheck, Arg0=UUID, returns true if support for 'PCI delays optimization ECR' is enabled and the UUID is correct
+ Method(PCIC,1,Serialized) {
+ If (LEqual(ECR1,1)) {
+ If (LEqual(Arg0, PCIG)) {
+ return (1)
+ }
+ }
+ return (0)
+ }
+ }
+
+// Sleep states supported by Chipset/Board.
+//----------------------------------------------------------------------
+// SSx - BIOS setup controlled enabled _Sx Sleep state status
+// Values to be written to SLP_TYPE register are provided by SBACPI.SDL (South Bridge ACPI ModulePart)
+
+ Name(\_S0, Package(4) {0x0,0x0,0,0}) // mandatory System state
+ if (SS1) {Name(\_S1, Package(4) {0x1,0x0,0,0})}
+ if (SS3) {Name(\_S3, Package(4) {0x5,0x0,0,0})}
+ if (SS4) {Name(\_S4, Package(4) {0x6,0x0,0,0})}
+ Name(\_S5, Package(4) {0x7,0x0,0,0}) // mandatory System state
+
+ Method(PTS, 1) { // METHOD CALLED FROM _PTS PRIOR TO ENTER ANY SLEEP STATE
+ If (Arg0) {
+ // entering any sleep state
+ }
+ }
+ Method(WAK, 1) { // METHOD CALLED FROM _WAK RIGHT AFTER WAKE UP
+ }
+}// End of ASL File
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Dmar/Dmar.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Dmar/Dmar.aslc new file mode 100644 index 0000000000..98ffab2c86 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Dmar/Dmar.aslc @@ -0,0 +1,188 @@ +/** @file
+ ACPI DMA address Remapping table
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "Dmar.h"
+
+EFI_ACPI_DMAR_TABLE DmarTable = {
+
+ EFI_ACPI_VTD_DMAR_TABLE_SIGNATURE,
+ sizeof (EFI_ACPI_DMAR_TABLE),
+ EFI_ACPI_DMAR_TABLE_REVISION,
+
+ //
+ // Checksum will be updated at runtime
+ //
+ 0x00,
+
+ //
+ // It is expected that these values will be programmed at runtime
+ //
+ 'I', 'N', 'T', 'E', 'L', ' ',
+ EFI_ACPI_DMAR_OEM_TABLE_ID,
+ 0x1,
+ EFI_ACPI_DMAR_OEM_CREATOR_ID,
+ 1,
+
+ //
+ // DMAR table specific entries below:
+ //
+
+ //
+ // 39-bit addressing Host Address Width
+ //
+ 38,
+
+ //
+ // Flags
+ //
+ 0,
+
+ //
+ // Reserved fields
+ //
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+
+ //
+ // First DRHD structure, VT-d Engine #1
+ //
+ {
+ 0, // Type = 0 (DRHD)
+ sizeof (EFI_ACPI_DRHD_ENGINE1_STRUCT), // Length of structure
+ 0, // Flag - Do not include all - bugbug - not clear what this means
+ 0, // Reserved fields
+ 0, // Segment
+ 0x00000000, // Base address of DMA-remapping hardware - Updated at boot time
+
+ //
+ // Device Scopes
+ //
+ {
+ 1, // Type
+ sizeof (EFI_ACPI_DEV_SCOPE_STRUCTURE), // Length
+ 0, // Segment number
+ 0, // Reserved
+ 0, // Start bus number
+ {2, 0} // PCI path
+ }
+ },
+
+ //Second DRHD structure VT-d Engine# 2
+ {
+ 0, // Type = 0 (DRHD)
+ sizeof(EFI_ACPI_DRHD_ENGINE2_STRUCT), // Length of strucure.
+ 1, // Flag - Include all
+ 0, // Reserved
+ 0, // Segment Number
+ 0x00000000, // Base address of DMA-remapping hardware.
+
+ {
+ //
+ // Device Scopes
+ //
+ {
+ 3, // Type=IO APIC
+ sizeof (EFI_ACPI_DEV_SCOPE_STRUCTURE), // Length
+ 0, // Reserved
+ 1, // Enumeration ID
+ 0xFA, // Start bus number
+ {31, 0} // PCI path
+ },
+ //
+ // Device Scopes
+ //
+ {
+ 4, // Type=HPET
+ sizeof (EFI_ACPI_DEV_SCOPE_STRUCTURE), // Length
+ 0, // Reserved
+ 0, // Enumeration ID
+ 0xFA, // Start bus number
+ {15, 0} // PCI path
+ }
+ }
+ },
+
+ //RMRR structure for USB devices.
+ {
+ 0x1, // Type 1 - RMRR structure
+ sizeof(EFI_ACPI_RMRR_USB_STRUC), // Length
+ 0x0000, // Reserved
+ 0x0000, // Segment Num
+ 0x0000000000000000, // RMRR Base address - Updated in runtime.
+ 0x0000000000000000, // RMRR Limit address - Updated in runtime.
+ {
+ {
+ 1, // Type
+ sizeof(EFI_ACPI_DEV_SCOPE_STRUCTURE), // Length
+ 0, // Reserved
+ 0, // Enum ID
+ 0, // Start bus number
+ {21, 0} // PCI path
+ },
+ {
+ 1, // Type
+ sizeof(EFI_ACPI_DEV_SCOPE_STRUCTURE), // Length
+ 0, // Reserved
+ 0, // Enum ID
+ 0, // Start bus number
+ {21, 1} // PCI path
+ }
+ }
+ },
+
+ //RMRR structure for IGD device.
+ {
+ 1, // Type 1 - RMRR structure
+ sizeof(EFI_ACPI_RMRR_IGD_STRUC), // Length
+ 0x0000, // Reserved
+ 0x0000, // Segment Num
+ 0x0000000000000000, // RMRR Base address - Updated in runtime.
+ 0x0000000000000000, // RMRR Limit address - Updated in runtime.
+ {
+ {
+ 1, // Type
+ sizeof(EFI_ACPI_DEV_SCOPE_STRUCTURE), // Length
+ 0, // Reserved
+ 0, // Enum ID
+ 0, // Start bus number
+ {2, 0} // PCI path
+ }
+ }
+ }
+};
+
+//
+// Dummy function required for build tools
+//
+#if defined (__GNUC__)
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from removing the
+ // data structure from the executable
+ //
+ return (VOID*)&DmarTable;
+}
+#else
+int
+main (
+ VOID
+ )
+{
+ return 0;
+}
+#endif
\ No newline at end of file diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Dmar/Dmar.h b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Dmar/Dmar.h new file mode 100644 index 0000000000..558a96408e --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Dmar/Dmar.h @@ -0,0 +1,33 @@ +/** @file
+ This file describes the contents of the ACPI DMA address Remapping
+ Some additional ACPI values are defined in Acpi1_0.h and Acpi2_0.h.
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SA_DMAR_H_
+#define _SA_DMAR_H_
+
+///
+/// Include standard ACPI table definitions
+///
+#include <IndustryStandard/Acpi30.h>
+#include <DmaRemappingTable.h>
+
+#pragma pack(1)
+
+#define EFI_ACPI_DMAR_OEM_TABLE_ID 0x20574442 ///< "BDW "
+#define EFI_ACPI_DMAR_OEM_CREATOR_ID 0x4C544E49 ///< "INTL"
+#pragma pack()
+
+#endif
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Art.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Art.asl new file mode 100644 index 0000000000..7e858d4cc9 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Art.asl @@ -0,0 +1,46 @@ +/** @file
+ ACPI Active Cooling Relationship Table
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.IETM)
+{
+ // _ART (Active Cooling Relationship Table)
+ //
+ // Arguments:
+ // None
+ // Return Value:
+ // A variable-length Package containing a Revision ID and a list of Active Relationship Packages as described below:
+ //
+ // Return Value Information
+ // Package {
+ // Revision, // Integer - Current revision is: 0
+ // ActiveRelationship[0] // Package
+ // ...
+ // ActiveRelationship[n] // Package
+ // }
+ //
+ Name(_ART, Package()
+ {
+ 0, // Revision
+ // Source Target Weight, AC0MaxLevel, AC1MaxLevel, AC2MaxLevel, AC3MaxLevel, AC4MaxLevel, AC5MaxLevel, AC6MaxLevel, AC7MaxLevel, AC8MaxLevel, AC9MaxLevel
+ Package(){\_SB.TFN1, \_SB.PCI0.TCPU, 100, 100, 80, 50, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
+ Package(){\_SB.TFN1, \_SB.SEN1, 100, 100, 80, 50, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
+ Package(){\_SB.TFN1, \_SB.GEN1, 100, 100, 80, 50, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
+ Package(){\_SB.TFN1, \_SB.GEN2, 100, 100, 80, 50, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
+ Package(){\_SB.TFN1, \_SB.GEN3, 100, 100, 80, 50, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
+ Package(){\_SB.TFN1, \_SB.GEN4, 100, 100, 80, 50, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF}
+ })
+
+} // End of Scope \_SB.IETM
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/BiosDataVault.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/BiosDataVault.asl new file mode 100644 index 0000000000..adbd8a186b --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/BiosDataVault.asl @@ -0,0 +1,15 @@ +/** @file
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+0xE5,0x1F,0x0C,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/DPLYParticipant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/DPLYParticipant.asl new file mode 100644 index 0000000000..8519ffe30a --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/DPLYParticipant.asl @@ -0,0 +1,155 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(TDSP)
+ {
+ Name(_HID, EISAID("INT3406")) // Intel DPTF Display Device
+ Name(_UID, "DPLY")
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If(LEqual(\DDSP,0)){
+ Return(0x00)
+ }
+ Return(0x0F)
+ }
+
+ // DDDL (DPTF Display Depth Limit)
+ //
+ // The DDDL object indicates dynamically a lower limit on the brightness control levels currently supported by the platform
+ // for the participant. Value returned must be a Percentage value that is in the _BCL brightness list.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // Brightness Display Depth Limit in percent
+ //
+ Method(DDDL)
+ {
+ Return(30) // 30% - This value must appear in the _BCL package
+ }
+
+ // DDPC ( DPTF Display Power/Performance Control)
+ //
+ // The DDPC object indicates dynamically a higher limit (ceiling) on the brightness control levels currently supported by
+ // the platform for the participant. Value returned must be a Percentage value that is in the _BCL brightness list.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // Display Power/Performance Control in percent
+ //
+ Method(DDPC)
+ {
+ Return(80) // 80% - This value must appear in the _BCL package
+ }
+
+ // _BCL (Query List of Brightness Control Levels Supported)
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A variable-length Package containing a list of integers representing the supported brightness
+ // levels. Each integer has 8 bits of significant dat
+ // Notes:
+ // List of supported brightness levels in the following sequence:
+ // Level when machine has full power.
+ // Level when machine is on batteries.
+ // Other supported levels.
+ //
+ Method(_BCL,,,,PkgObj)
+ {
+ Return(Package(){80, 50, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100})
+ }
+
+ // _BCM (Set the Brightness Level)
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the new brightness level
+ // Return Value:
+ // None
+ //
+ Method(_BCM,1)
+ {
+ If(CondRefOf(\_SB.PCI0.GFX0.DD1F._BCM))
+ {
+ \_SB.PCI0.GFX0.DD1F._BCM(Arg0) // call the core Graphics method
+ }
+ }
+
+ // _BQC (Brightness Query Current level)
+ //
+ // This method returns the current brightness level of a built-in display output device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the current brightness level (must be one of the values returned from the
+ // _BCL method)
+ //
+ Method(_BQC,0)
+ {
+ If(CondRefOf(\_SB.PCI0.GFX0.DD1F._BQC))
+ {
+ Return(\_SB.PCI0.GFX0.DD1F._BQC()) // call the core Graphics method
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _DCS (Return the Status of Output Device)
+ //
+ // This method is required if hotkey display switching is supported.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the device status (32 bits)
+ // Bit Definitions:
+ // [0] - Output connector exists in the system now
+ // [1] - Output is activated
+ // [2] - Output is ready to switch
+ // [3] - Output is not defective (it is functioning properly)
+ // [4] - Device is attached (this is optional)
+ // [31:5] Reserved (must be zero)
+ //
+ Method(_DCS,0)
+ {
+ If(CondRefOf(\_SB.PCI0.GFX0.DD1F._DCS))
+ {
+ Return(\_SB.PCI0.GFX0.DD1F._DCS()) // call the core Graphics method
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ } // End TDSP Device
+}// end Scope(\_SB)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Dppm.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Dppm.asl new file mode 100644 index 0000000000..d85f776118 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Dppm.asl @@ -0,0 +1,63 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.IETM)
+{
+ //
+ // DPPM Passive Policy 2.0
+ //
+ Name (DP2P, Package ()
+ {
+ ToUUID("9E04115A-AE87-4D1C-9500-0F3E340BFE75")
+ })
+
+ //
+ // DPPM Passive Policy 1.0
+ //
+ Name (DPSP, Package ()
+ {
+ ToUUID("42A441D6-AE6A-462B-A84B-4A8CE79027D3")
+ })
+
+ // DPPM Active Policy
+ //
+ Name (DASP, Package ()
+ {
+ ToUUID("3A95C389-E4B8-4629-A526-C52C88626BAE")
+ })
+
+ //
+ // DPPM Crtical Policy
+ //
+ Name (DCSP, Package()
+ {
+ ToUUID("97C68AE7-15FA-499c-B8C9-5DA81D606E0A")
+ })
+
+ //
+ // Power Boss Policy
+ //
+ Name (POBP, Package ()
+ {
+ ToUUID("F5A35014-C209-46A4-993A-EB56DE7530A1")
+ })
+
+ //
+ // Virtual Sensor Policy
+ //
+ Name (DVSP, Package ()
+ {
+ ToUUID("6ED722A7-9240-48a5-B479-31EEF723D7CF")
+ })
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Dptf.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Dptf.asl new file mode 100644 index 0000000000..6cedff40e3 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Dptf.asl @@ -0,0 +1,641 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+DefinitionBlock (
+ "Dptf.aml",
+ "SSDT",
+ 2,
+ "DptfTab",
+ "DptfTab",
+ 0x1000
+ )
+{
+ External(\P8XH, MethodObj)
+ External(\ECON, IntObj)
+ External(\OSSL, IntObj)
+ External(\PSVT, IntObj)
+ External(\CRTT, IntObj)
+ External(\ACTT, IntObj)
+ External(\PWRS, IntObj)
+
+ External(\_TZ.ETMD, IntObj)
+ External(\_TZ.TZ01, ThermalZoneObj)
+ External(\_TZ.LEGA, IntObj)
+ External(\_TZ.LEGP, IntObj)
+ External(\_TZ.LEGC, IntObj)
+
+ External(\_PR.CPU0, DeviceObj)
+ External(\_PR.CPU1, DeviceObj)
+ External(\_PR.CPU2, DeviceObj)
+ External(\_PR.CPU3, DeviceObj)
+
+ External(\DPTE, IntObj) // DptfEnable
+ External(\DCFE, IntObj) // EnableDCFG
+
+ External(\DPSR, IntObj) // DptfProcessor
+ External(\DPCT, IntObj) // DptfProcCriticalTemperature
+ External(\DPPT, IntObj) // DptfProcPassiveTemperature
+ External(\DPAT, IntObj) // DptfProcActiveTemperature
+ External(\DPC3, IntObj) // DptfProcCriticalTemperatureS3
+ External(\DPHT, IntObj) // DptfProcHotThermalTripPoint
+ External(\CPUS, IntObj) // ThermalSamplingPeriodTCPU
+
+ External(\DDSP, IntObj) // DptfDisplayDevice
+
+ External(\S1DE, IntObj) // EnableSen1Participant
+ External(\S1AT, IntObj) // ActiveThermalTripPointSen1
+ External(\S1PT, IntObj) // PassiveThermalTripPointSen1
+ External(\S1CT, IntObj) // CriticalThermalTripPointSen1
+ External(\S1S3, IntObj) // CriticalThermalTripPointSen1S3
+ External(\S1HT, IntObj) // HotThermalTripPointSen1
+ External(\SSP1, IntObj) // SensorSamplingPeriodSen1
+
+ External(\GN1E, IntObj) // EnableGen1Participant
+ External(\G1AT, IntObj) // ActiveThermalTripPointGen1
+ External(\G1PT, IntObj) // PassiveThermalTripPointGen1
+ External(\G1CT, IntObj) // CriticalThermalTripPointGen1
+ External(\G1C3, IntObj) // CriticalThermalTripPointGen1S3
+ External(\G1HT, IntObj) // HotThermalTripPointGen1
+ External(\TSP1, IntObj) // ThermistorSamplingPeriodGen1
+
+ External(\GN2E, IntObj) // EnableGen2Participant
+ External(\G2AT, IntObj) // ActiveThermalTripPointGen2
+ External(\G2PT, IntObj) // PassiveThermalTripPointGen2
+ External(\G2CT, IntObj) // CriticalThermalTripPointGen2
+ External(\G2C3, IntObj) // CriticalThermalTripPointGen2S3
+ External(\G2HT, IntObj) // HotThermalTripPointGen2
+ External(\TSP2, IntObj) // ThermistorSamplingPeriodGen2
+
+ External(\GN3E, IntObj) // EnableGen3Participant
+ External(\G3AT, IntObj) // ActiveThermalTripPointGen3
+ External(\G3PT, IntObj) // PassiveThermalTripPointGen3
+ External(\G3CT, IntObj) // CriticalThermalTripPointGen3
+ External(\G3C3, IntObj) // CriticalThermalTripPointGen3S3
+ External(\G3HT, IntObj) // HotThermalTripPointGen3
+ External(\TSP3, IntObj) // ThermistorSamplingPeriodGen3
+
+ External(\GN4E, IntObj) // EnableGen4Participant
+ External(\G4AT, IntObj) // ActiveThermalTripPointGen4
+ External(\G4PT, IntObj) // PassiveThermalTripPointGen4
+ External(\G4CT, IntObj) // CriticalThermalTripPointGen4
+ External(\G4C3, IntObj) // CriticalThermalTripPointGen4S3
+ External(\G4HT, IntObj) // HotThermalTripPointGen4
+ External(\TSP4, IntObj) // ThermistorSamplingPeriodGen4
+
+ External(\VSP1, IntObj) // EnableVS1Participant
+ External(\V1AT, IntObj) // ActiveThermalTripPointVS1
+ External(\V1PV, IntObj) // PassiveThermalTripPointVS1
+ External(\V1CR, IntObj) // CriticalThermalTripPointVS1
+ External(\V1C3, IntObj) // CriticalThermalTripPointVS1S3
+ External(\V1HT, IntObj) // HotThermalTripPointVS1
+
+ External(\VSP2, IntObj) // EnableVS2Participant
+ External(\V2AT, IntObj) // ActiveThermalTripPointVS2
+ External(\V2PV, IntObj) // PassiveThermalTripPointVS2
+ External(\V2CR, IntObj) // CriticalThermalTripPointVS2
+ External(\V2C3, IntObj) // CriticalThermalTripPointVS2S3
+ External(\V2HT, IntObj) // HotThermalTripPointVS2
+
+ External(\VSP3, IntObj) // EnableVS3Participant
+ External(\V3AT, IntObj) // ActiveThermalTripPointVS3
+ External(\V3PV, IntObj) // PassiveThermalTripPointVS3
+ External(\V3CR, IntObj) // CriticalThermalTripPointVS3
+ External(\V3C3, IntObj) // CriticalThermalTripPointVS3S3
+ External(\V3HT, IntObj) // HotThermalTripPointVS3
+
+ External(\DPAP, IntObj) // EnableActivePolicy
+ External(\DPPP, IntObj) // EnablePassivePolicy
+ External(\TRTV, IntObj) // TrtRevision
+ External(\DPCP, IntObj) // EnableCriticalPolicy
+ External(\PBPE, IntObj) // EnablePowerBossPolicy
+ External(\VSPE, IntObj) // EnableVSPolicy
+
+ External(\DFAN, IntObj) // DptfFanDevice
+ External(\CHGE, IntObj) // DptfChargerDevice
+ External(\PWRE, IntObj) // EnablePowerParticipant
+ External(\PPPR, IntObj) // PowerParticipantPollingRate
+
+ External(\ODV0, IntObj) // OemDesignVariable0
+ External(\ODV1, IntObj) // OemDesignVariable1
+ External(\ODV2, IntObj) // OemDesignVariable2
+ External(\ODV3, IntObj) // OemDesignVariable3
+ External(\ODV4, IntObj) // OemDesignVariable4
+ External(\ODV5, IntObj) // OemDesignVariable5
+
+ External(\_SB.PCI0, DeviceObj)
+ External(\_SB.PCI0.VLVC.MHBR, FieldUnitObj)
+
+
+ External(\_PR.CPU0._PSS, MethodObj)
+ External(\_PR.CPU0.NPSS, PkgObj)
+ External(\_PR.CPU0.SPSS, PkgObj)
+ External(\_PR.CPU0._PPC, IntObj)
+ External(\_PR.CPU0._TSS, MethodObj)
+ External(\_PR.CPU0._PTC, MethodObj)
+ External(\_PR.CPU0._TSD, MethodObj)
+ External(\_PR.CPU0._TPC, IntObj)
+ External(\_PR.CPU0._TDL, MethodObj)
+
+ External(\_SB.PCI0.GFX0, DeviceObj)
+ External(\_SB.PCI0.GFX0.DD1F, DeviceObj)
+ External(\_SB.PCI0.GFX0.DD1F._BCM, MethodObj)
+ External(\_SB.PCI0.GFX0.DD1F._BQC, MethodObj)
+ External(\_SB.PCI0.GFX0.DD1F._DCS, MethodObj)
+
+Scope(\_SB)
+{
+ //
+ // DPTF Thermal Zone Device
+ //
+ Device(IETM){
+ //
+ // Intel DPTF Thermal Framework Device
+ //
+ Name(_HID, EISAID("INT3400"))
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\DPTE,1)) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ //
+ // Note: the number of GUID package elements in TMPP must be equal or greater than the number
+ // of store statements in IDSP in order to prevent an overrun.
+ //
+ Name(TMPP,Package()
+ {
+ ToUUID("00000000-0000-0000-0000-000000000000"),
+ ToUUID("00000000-0000-0000-0000-000000000000"),
+ ToUUID("00000000-0000-0000-0000-000000000000"),
+ ToUUID("00000000-0000-0000-0000-000000000000"),
+ ToUUID("00000000-0000-0000-0000-000000000000")
+ })
+
+ // IDSP (Intel DPTF Supported Policies)
+ //
+ // This object evaluates to a package of packages, with each package containing the UUID
+ // values to represent a policy implemented and supported by the Intel DPTF software stack.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // Package of Guid packages
+ //
+ Method(IDSP,0,Serialized,,PkgObj)
+ {
+ Name(TMPI,0)
+
+ // Passive Policy 2.0 GUID
+ If (LAnd(LEqual(\DPPP,2),CondRefOf(DP2P))) {
+ Store(DeRefOf(Index(DP2P,0)), Index(TMPP,TMPI))
+ Increment(TMPI)
+ }
+
+ // Passive Policy 1.0 GUID
+ If (LAnd(LEqual(\DPPP,1),CondRefOf(DPSP))) {
+ Store(DeRefOf(Index(DPSP,0)), Index(TMPP,TMPI))
+ Increment(TMPI)
+ }
+
+ // Active Policy GUID
+ If (LAnd(LEqual(\DPAP,1),CondRefOf(DASP))) {
+ Store(DeRefOf(Index(DASP,0)), Index(TMPP,TMPI))
+ Increment(TMPI)
+ }
+
+ // Critical Policy GUID
+ If (LAnd(LEqual(\DPCP,1),CondRefOf(DCSP))) {
+ Store(DeRefOf(Index(DCSP,0)), Index(TMPP,TMPI))
+ Increment(TMPI)
+ }
+
+ // Power Boss Policy GUID
+ If (LAnd(LEqual(\PBPE,1),CondRefOf(POBP))) {
+ Store(DeRefOf(Index(POBP,0)), Index(TMPP,TMPI))
+ Increment(TMPI)
+ }
+
+ // Virtual Sensor Policy GUID
+ If (LAnd(LEqual(\VSPE,1),CondRefOf(DVSP))) {
+ Store(DeRefOf(Index(DVSP,0)), Index(TMPP,TMPI))
+ Increment(TMPI)
+ }
+
+ Return(TMPP)
+ }
+
+ //
+ // Save original trip points so _OSC method can enable/disable Legacy thermal policies by manipulating trip points.
+ //
+ Name (PTRP,0) // Passive trip point
+ Name (PSEM,0) // Passive semaphore
+ Name (ATRP,0) // Active trip point
+ Name (ASEM,0) // Active semaphore
+ Name (YTRP,0) // Critical trip point
+ Name (YSEM,0) // Critical semaphore
+
+ // _OSC (Operating System Capabilities)
+ //
+ // This object is evaluated by each DPTF policy implementation to communicate to the platform of the existence and/or control transfer.
+ //
+ // Arguments: (4)
+ // Arg0 - A Buffer containing a UUID
+ // Arg1 - An Integer containing a Revision ID of the buffer format
+ // Arg2 - An Integer containing a count of entries in Arg3
+ // Arg3 - A Buffer containing a list of DWORD capabilities
+ // Return Value:
+ // A Buffer containing a list of capabilities
+ //
+ Method(_OSC, 4,Serialized,,BuffObj,{BuffObj,IntObj,IntObj,BuffObj})
+ {
+ Name (NUMP,0)
+ Name (UID2,ToUUID("FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF"))
+
+ // Point to Status DWORD in the Arg3 buffer (STATUS)
+ CreateDWordField(Arg3, 0, STS1)
+
+ // Point to Caps DWORDs of the Arg3 buffer (CAPABILITIES)
+ CreateDWordField(Arg3, 4, CAP1)
+
+ //
+ // _OSC needs to validate the UUID and Revision.
+ //
+ // IF Unrecognized UUID
+ // Return Unrecognized UUID _OSC Failure
+ // IF Unsupported Revision
+ // Return Unsupported Revision _OSC Failure
+ //
+ // STS0[0] = Reserved
+ // STS0[1] = _OSC Failure
+ // STS0[2] = Unrecognized UUID
+ // STS0[3] = Unsupported Revision
+ // STS0[4] = Capabilities masked
+ //
+ // Get the platform UUID's that are available, this will be a package of packages.
+ //
+ IDSP() // initialize TMPP with GUID's
+ Store(SizeOf(TMPP),NUMP) // how many GUID's in the package?
+
+ // Note: The comparison method used is necessary due to
+ // limitations of certain OSes which cannot perform direct
+ // buffer comparisons.
+ //
+ // Create a set of "Input" UUID fields.
+ //
+ CreateDWordField(Arg0, 0x0, IID0)
+ CreateDWordField(Arg0, 0x4, IID1)
+ CreateDWordField(Arg0, 0x8, IID2)
+ CreateDWordField(Arg0, 0xC, IID3)
+ //
+ // Create a set of "Expected" UUID fields.
+ //
+ CreateDWordField(UID2, 0x0, EID0)
+ CreateDWordField(UID2, 0x4, EID1)
+ CreateDWordField(UID2, 0x8, EID2)
+ CreateDWordField(UID2, 0xC, EID3)
+ //
+ // Compare the input UUID to the list of UUID's in the system.
+ //
+ While(NUMP){
+ //
+ // copy one uuid from TMPP to UID2
+ //
+ Store(DeRefOf (Index (TMPP, Subtract(NUMP,1))),UID2)
+ //
+ // Verify the input UUID matches the expected UUID.
+ //
+ If (LAnd(LAnd(LEqual(IID0, EID0), LEqual(IID1, EID1)), LAnd(LEqual(IID2, EID2), LEqual(IID3, EID3)))) {
+ Break // break out of while loop when matching UUID is found
+ }
+ Decrement(NUMP)
+ }
+
+ If (LEqual(NUMP,0)) {
+ //
+ // Return Unrecognized UUID _OSC Failure
+ //
+ And(STS1,0xFFFFFF00,STS1)
+ Or(STS1,0x6,STS1)
+ Return(Arg3)
+ }
+
+ If (LNot(LEqual(Arg1, 1)))
+ {
+ //
+ // Return Unsupported Revision _OSC Failure
+ //
+ And(STS1,0xFFFFFF00,STS1)
+ Or(STS1,0xA,STS1)
+ Return(Arg3)
+ }
+
+ If (LNot(LEqual(Arg2, 2)))
+ {
+ //
+ // Return Argument 3 Buffer Count not sufficient
+ //
+ And(STS1,0xFFFFFF00,STS1)
+ Or(STS1,0x2,STS1)
+ Return(Arg3)
+ }
+
+ //
+ // Passive Policy 2.0 GUID
+ //
+ If (CondRefOf(\PSVT)) {
+ If (LEqual(PSEM,0)) {
+ Store(1,PSEM) // use semaphore so variable is only initialized once
+ Store(\PSVT,PTRP) // save trip point in case we have to restore it
+ }
+ //
+ // copy the GUID to UID2
+ //
+ If (CondRefOf(DP2P)) {
+ Store(DeRefOf (Index (DP2P, 0)),UID2)
+ }
+ //
+ // Verify the test UUID matches the input UUID.
+ //
+ If (LAnd(LAnd(LEqual(IID0, EID0), LEqual(IID1, EID1)), LAnd(LEqual(IID2, EID2), LEqual(IID3, EID3)))) {
+ // do passive notify
+ If(Not(And(STS1, 0x01))) // Test Query Flag
+ { // Not a query operation, so process the request
+ If (And(CAP1, 0x01)) {
+ // Enable DPTF
+ // Nullify the legacy thermal zone.
+ Store(110,\PSVT) // spoof legacy trip point with high value
+ Store(0, \_TZ.LEGP) // disable legacy thermal management
+ } Else { // policy unloading, re-enable legacy thermal zone
+ Store(PTRP,\PSVT) // restore passive value
+ Store(1, \_TZ.LEGP) // enable legacy thermal management
+ }
+ // Send notification to legacy thermal zone for legacy policy to be enabled/disabled
+ Notify (\_TZ.TZ01, 0x81)
+ }
+ Return (Arg3)
+ }
+ }
+
+ //
+ // Active Policy GUID
+ //
+ If (CondRefOf(\ACTT)) {
+ If (LEqual(ASEM,0)) {
+ Store(1,ASEM) // use semaphore so variable is only initialized once
+ Store(\ACTT,ATRP) // save trip point in case we have to restore it
+ }
+ //
+ // copy the GUID to UID2
+ //
+ If (CondRefOf(DASP)) {
+ Store(DeRefOf (Index (DASP, 0)),UID2)
+ }
+ //
+ // Verify the test UUID matches the input UUID.
+ //
+ If (LAnd(LAnd(LEqual(IID0, EID0), LEqual(IID1, EID1)), LAnd(LEqual(IID2, EID2), LEqual(IID3, EID3)))) {
+ // do active notify
+ If (Not(And(STS1, 0x01))) {
+ // Test Query Flag
+ // Not a query operation, so process the request
+ If(And(CAP1, 0x01)) {
+ // Enable DPTF
+ // Nullify the legacy thermal zone.
+ Store(110,\ACTT) // spoof legacy trip point with high value
+ Store(0, \_TZ.LEGA) // disable legacy thermal management
+ } Else { // policy unloading, re-enable legacy thermal zone
+ Store(ATRP,\ACTT) // restore legacy value
+ Store(1, \_TZ.LEGA) // enable legacy thermal management
+ }
+ // Send notification to legacy thermal zone for legacy policy to be enabled/disabled
+ Notify(\_TZ.TZ01, 0x81)
+ }
+ Return(Arg3)
+ }
+ }
+
+ //
+ // Critical Policy GUID
+ //
+ If (CondRefOf(\CRTT)) {
+ If (LEqual(YSEM,0)) {
+ Store(1,YSEM) // use semaphore so variable is only initialized once
+ Store(\CRTT,YTRP) // save trip point in case we have to restore it
+ }
+ //
+ // copy the GUID to UID2
+ //
+ If (CondRefOf(DCSP)) {
+ Store(DeRefOf (Index (DCSP, 0)),UID2)
+ }
+ //
+ // Verify the test UUID matches the input UUID.
+ //
+ If (LAnd(LAnd(LEqual(IID0, EID0), LEqual(IID1, EID1)), LAnd(LEqual(IID2, EID2), LEqual(IID3, EID3)))) {
+ // do critical notify
+ If (Not(And(STS1, 0x01))) {
+ // Test Query Flag
+ // Not a query operation, so process the request
+ If (And(CAP1, 0x01)) {
+ // Enable DPTF
+ // Nullify the legacy thermal zone.
+ Store(210,\CRTT) // spoof legacy trip point with high value
+ Store(0, \_TZ.LEGC) // disable legacy thermal management
+ } Else { // policy unloading, re-enable legacy thermal zone
+ Store(YTRP,\CRTT) // restore legacy value
+ Store(1, \_TZ.LEGC) // enable legacy thermal management
+ }
+ // Send notification to legacy thermal zone for legacy policy to be enabled/disabled
+ Notify(\_TZ.TZ01, 0x81)
+ }
+ Return(Arg3)
+ }
+ }
+
+ Return(Arg3)
+ } // _OSC
+
+ // KTOC (Kelvin to Celsius)
+ //
+ // This control method converts from 10ths of degree Kelvin to Celsius.
+ //
+ // Arguments: (1)
+ // Arg0 - Temperature in 10ths of degree Kelvin
+ // Return Value:
+ // Temperature in Celsius
+ //
+ Method(KTOC,1,Serialized)
+ {
+ If (LGreater(Arg0,2732)) { // make sure we have a temperature above zero Celcius
+ Return(Divide(Subtract(Arg0,2732),10))
+ } Else {
+ Return(0) // negative temperatures Celcius are changed to 0 degrees Celcius
+ }
+ }
+
+ // CTOK (Celsius to Kelvin)
+ //
+ // This control method converts from Celsius to 10ths of degree Kelvin.
+ //
+ // Arguments: (1)
+ // Arg0 - Temperature in Celsius
+ // Return Value:
+ // Temperature in 10ths of degree Kelvin
+ //
+ Method(CTOK,1,Serialized)
+ {
+ Return(Add(Multiply(Arg0,10),2732))
+ }
+
+ // DCFG (DPTF Configuration)
+ //
+ // Returns a DWORD data representing the desired behavior of DPTF besides supported DSP and participants.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the DPTF Configuration bitmap:
+ // Bit 0 = Generic UI Access Control (0 - enable as default, 1 - disable access)
+ // Bit 1 = Restricted UI Access Control ( 0 - enable as default, 1 - disable access )
+ // Bit 2 = Shell Access Control ( 0 - enable as default, 1 - disable access)
+ // Bit 3 = Environment Monitoring Report Control ( 0 - report is allowed as default, 1 - No environmental monitoring report to Microsoft )
+ // Bit 4 = Thermal Mitigation Report Control ( 0 - No mitigation report to Microsoft as default, 1 - report is allowed)
+ // Bit 5 = Thermal Policy Report Control ( 0 - No policy report to Microsoft as default, 1 - report is allowed)
+ // Bits[31:6] - Reserved (must be cleared).
+ //
+ Method(DCFG)
+ {
+ Return(\DCFE)
+ }
+
+ // ODVP (Oem Design Variables Package)
+ //
+ // Variables for OEM's to customize DPTF behavior based on platform changes.
+ //
+ Name(ODVX,Package(){0,0,0,0,0,0})
+
+ // ODVP (Oem Design Variables Package)
+ //
+ // Variables for OEM's to customize DPTF behavior based on platform changes.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // Package of integers
+ //
+ Method(ODVP,0,Serialized,,PkgObj)
+ {
+ Store(\ODV0,Index(ODVX,0))
+ Store(\ODV1,Index(ODVX,1))
+ Store(\ODV2,Index(ODVX,2))
+ Store(\ODV3,Index(ODVX,3))
+ Store(\ODV4,Index(ODVX,4))
+ Store(\ODV5,Index(ODVX,5))
+ Return(ODVX)
+ }
+
+ } // End IETM Device
+} // End \_SB Scope
+
+
+
+
+//
+// CPU Participant
+//
+Include("TCPUParticipant.asl")
+
+Include("DPLYParticipant.asl")
+
+//
+// Participants using motherboard sensors.
+//
+Include("SEN1Participant.asl")
+
+//
+// Fan participant.
+//
+Include("TFN1Participant.asl")
+
+//
+// Participants using device sensors.
+//
+Include("TPWRParticipant.asl")
+
+//
+// Participants using motherboard thermistors.
+//
+Include("Gen1Participant.asl")
+Include("Gen2Participant.asl")
+Include("Gen3Participant.asl")
+Include("Gen4Participant.asl")
+
+//
+// Policy support files
+//
+Include("Art.asl")
+Include("Trt.asl")
+Include("Psvt.asl")
+Include("Dppm.asl")
+
+//
+// Participants using virtual sensors.
+//
+Include("Vir1Participant.asl")
+Include("Vir2Participant.asl")
+Include("Vir3Participant.asl")
+
+Scope(\_SB.IETM)
+{
+ // GDDV (Get Dptf Data Vault)
+ //
+ // The data vault can contain APCT, APAT, and PSVT tables.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A package containing the data vault
+ //
+ Method(GDDV,0,Serialized,0,PkgObj)
+ {
+ Return(Package()
+ {
+ Buffer()
+ {
+ Include("BiosDataVault.asl") // empty data vault for documentation purposes
+ }
+ })
+ }
+} // End Scope(\_SB.IETM)
+
+} // End SSDT
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen1Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen1Participant.asl new file mode 100644 index 0000000000..290a11fb77 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen1Participant.asl @@ -0,0 +1,349 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(GEN1) // Generic participant
+ {
+ Name(_HID, EISAID("INT3403"))
+ Name(_UID, "GEN1")
+ Name(_STR, Unicode ("Thermistor 1 CPU_VR_RT5D1"))
+ Name(PTYP, 0x12)
+
+ Name(FAUX, 0)
+ Name(SAUX, 0)
+ Name(CTYP,0) // Mode
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (\GN1E) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _TMP (Temperature)
+ //
+ // This control method returns the thermal zone's current operating temperature.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the current temperature of the thermal zone (in tenths of degrees Kelvin)
+ //
+ Method(_TMP,0,Serialized)
+ {
+
+ Return(3000) // degrees kelvin
+
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 2)
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT0,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 0
+ {
+
+ }
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT1,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 1
+ {
+
+ }
+
+ // Thermal Sensor Hysteresis, 2 degrees
+ Name(GTSH, 20)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.GEN1, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius, this could be a platform policy with setup item
+ }
+
+ // _TSP (Thermal Sampling Period)
+ //
+ // Sets the polling interval in 10ths of seconds. A value of 0 tells the driver to use interrupts.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the polling rate in tenths of seconds.
+ // A value of 0 will specify using interrupts through the ACPI notifications.
+ //
+ // The granularity of the sampling period is 0.1 seconds. For example, if the sampling period is 30.0
+ // seconds, then _TSP needs to report 300; if the sampling period is 0.5 seconds, then it will report 5.
+ //
+ Method(_TSP,0,Serialized)
+ {
+ Return(\TSP1)
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\G1AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G1AT)) // Active Cooling Policy
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ If (LEqual(\G1AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G1AT),100)) // 10 degrees less than _AC0
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ If (LEqual(\G1AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G1AT),200)) // 20 degrees less than _AC0
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\G1PT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G1PT)) // Passive Cooling Policy
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\G1CT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G1CT))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\G1C3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G1C3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\G1HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G1HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.GEN1, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ Store(Arg0, VERS)
+ Store(Arg1, CTYP)
+ Store(Arg2, ALMT)
+ Store(Arg3, PLMT)
+ Store(Arg4, WKLD)
+ Store(Arg5, DSTA)
+ Store(Arg6, RES1)
+ Notify(\_SB.GEN1, 0x91)
+ }
+ }
+
+ } // End of Device(Gen1)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen2Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen2Participant.asl new file mode 100644 index 0000000000..b1fb98da4c --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen2Participant.asl @@ -0,0 +1,349 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(GEN2) // Generic participant
+ {
+ Name(_HID, EISAID("INT3403"))
+ Name(_UID, "GEN2")
+ Name(_STR, Unicode ("Thermistor 2 DIMM0_RT1E1"))
+ Name(PTYP, 0x12)
+
+ Name(FAUX, 0)
+ Name(SAUX, 0)
+ Name(CTYP,0) // Mode
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (\GN2E) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _TMP (Temperature)
+ //
+ // This control method returns the thermal zone's current operating temperature.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the current temperature of the thermal zone (in tenths of degrees Kelvin)
+ //
+ Method(_TMP,0,Serialized)
+ {
+
+ Return(3000) // degrees kelvin
+
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 2)
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT0,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 0
+ {
+
+ }
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT1,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 1
+ {
+
+ }
+
+ // Thermal Sensor Hysteresis, 2 degrees
+ Name(GTSH, 20)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.GEN2, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius, this could be a platform policy with setup item
+ }
+
+ // _TSP (Thermal Sampling Period)
+ //
+ // Sets the polling interval in 10ths of seconds. A value of 0 tells the driver to use interrupts.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the polling rate in tenths of seconds.
+ // A value of 0 will specify using interrupts through the ACPI notifications.
+ //
+ // The granularity of the sampling period is 0.1 seconds. For example, if the sampling period is 30.0
+ // seconds, then _TSP needs to report 300; if the sampling period is 0.5 seconds, then it will report 5.
+ //
+ Method(_TSP,0,Serialized)
+ {
+ Return(\TSP2)
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\G2AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G2AT)) // Active Cooling Policy
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ If (LEqual(\G2AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G2AT),100)) // 10 degrees less than _AC0
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ If (LEqual(\G2AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G2AT),200)) // 20 degrees less than _AC0
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\G2PT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G2PT)) // Passive Cooling Policy
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\G2CT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G2CT))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\G2C3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G2C3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\G2HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G2HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.GEN2, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ Store(Arg0, VERS)
+ Store(Arg1, CTYP)
+ Store(Arg2, ALMT)
+ Store(Arg3, PLMT)
+ Store(Arg4, WKLD)
+ Store(Arg5, DSTA)
+ Store(Arg6, RES1)
+ Notify(\_SB.GEN2, 0x91)
+ }
+ }
+
+ } // End of Device(Gen2)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen3Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen3Participant.asl new file mode 100644 index 0000000000..591ba5f3a3 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen3Participant.asl @@ -0,0 +1,349 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(GEN3) // Generic participant
+ {
+ Name(_HID, EISAID("INT3403"))
+ Name(_UID, "GEN3")
+ Name(_STR, Unicode ("Thermistor 3 AMBIENT_TEMP_RT4B1"))
+ Name(PTYP, 0x12)
+
+ Name(FAUX, 0)
+ Name(SAUX, 0)
+ Name(CTYP,0) // Mode
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (\GN3E) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _TMP (Temperature)
+ //
+ // This control method returns the thermal zone's current operating temperature.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the current temperature of the thermal zone (in tenths of degrees Kelvin)
+ //
+ Method(_TMP,0,Serialized)
+ {
+
+ Return(3000) // degrees kelvin
+
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 2)
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT0,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 0
+ {
+
+ }
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT1,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 1
+ {
+
+ }
+
+ // Thermal Sensor Hysteresis, 2 degrees
+ Name(GTSH, 20)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.GEN3, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius, this could be a platform policy with setup item
+ }
+
+ // _TSP (Thermal Sampling Period)
+ //
+ // Sets the polling interval in 10ths of seconds. A value of 0 tells the driver to use interrupts.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the polling rate in tenths of seconds.
+ // A value of 0 will specify using interrupts through the ACPI notifications.
+ //
+ // The granularity of the sampling period is 0.1 seconds. For example, if the sampling period is 30.0
+ // seconds, then _TSP needs to report 300; if the sampling period is 0.5 seconds, then it will report 5.
+ //
+ Method(_TSP,0,Serialized)
+ {
+ Return(\TSP3)
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\G3AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G3AT)) // Active Cooling Policy
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ If (LEqual(\G3AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G3AT),100)) // 10 degrees less than _AC0
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ If (LEqual(\G3AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G3AT),200)) // 20 degrees less than _AC0
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\G3PT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G3PT)) // Passive Cooling Policy
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\G3CT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G3CT))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\G3C3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G3C3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\G3HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G3HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.GEN3, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ Store(Arg0, VERS)
+ Store(Arg1, CTYP)
+ Store(Arg2, ALMT)
+ Store(Arg3, PLMT)
+ Store(Arg4, WKLD)
+ Store(Arg5, DSTA)
+ Store(Arg6, RES1)
+ Notify(\_SB.GEN3, 0x91)
+ }
+ }
+
+ } // End of Device(Gen3)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen4Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen4Participant.asl new file mode 100644 index 0000000000..128295cfd6 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Gen4Participant.asl @@ -0,0 +1,349 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(GEN4) // Generic participant
+ {
+ Name(_HID, EISAID("INT3403"))
+ Name(_UID, "GEN4")
+ Name(_STR, Unicode ("Thermistor 4 SKIN_RT3H1"))
+ Name(PTYP, 0x12)
+
+ Name(FAUX, 0)
+ Name(SAUX, 0)
+ Name(CTYP,0) // Mode
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (\GN4E) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _TMP (Temperature)
+ //
+ // This control method returns the thermal zone's current operating temperature.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the current temperature of the thermal zone (in tenths of degrees Kelvin)
+ //
+ Method(_TMP,0,Serialized)
+ {
+
+ Return(3000) // degrees kelvin
+
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 2)
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT0,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 0
+ {
+
+ }
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+ Method(PAT1,1,Serialized) // send Arg0 to EC as Programmable Auxiliary Trip Point 1
+ {
+
+ }
+
+ // Thermal Sensor Hysteresis, 2 degrees
+ Name(GTSH, 20)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.GEN4, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius, this could be a platform policy with setup item
+ }
+
+ // _TSP (Thermal Sampling Period)
+ //
+ // Sets the polling interval in 10ths of seconds. A value of 0 tells the driver to use interrupts.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the polling rate in tenths of seconds.
+ // A value of 0 will specify using interrupts through the ACPI notifications.
+ //
+ // The granularity of the sampling period is 0.1 seconds. For example, if the sampling period is 30.0
+ // seconds, then _TSP needs to report 300; if the sampling period is 0.5 seconds, then it will report 5.
+ //
+ Method(_TSP,0,Serialized)
+ {
+ Return(\TSP4)
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\G4AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G4AT)) // Active Cooling Policy
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ If (LEqual(\G4AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G4AT),100)) // 10 degrees less than _AC0
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ If (LEqual(\G4AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\G4AT),200)) // 20 degrees less than _AC0
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\G4PT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G4PT)) // Passive Cooling Policy
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\G4CT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G4CT))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\G4C3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G4C3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\G4HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\G4HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.GEN4, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ Store(Arg0, VERS)
+ Store(Arg1, CTYP)
+ Store(Arg2, ALMT)
+ Store(Arg3, PLMT)
+ Store(Arg4, WKLD)
+ Store(Arg5, DSTA)
+ Store(Arg6, RES1)
+ Notify(\_SB.GEN4, 0x91)
+ }
+ }
+
+ } // End of Device(Gen4)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Psvt.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Psvt.asl new file mode 100644 index 0000000000..c0aef55a07 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Psvt.asl @@ -0,0 +1,33 @@ +/** @file
+ Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.IETM)
+{
+ // PTTL (Participant Temperature Tolerance Level)
+ // This object evaluates to an integer representing the temperature range within which any change
+ // in participant temperature is considered acceptable and no policy actions will be taken by the
+ // policy. The temperature tolerance level is expressed in the units of 10s of Kelvin.
+ //
+ Name (PTTL, 20) // ToleranceLevel
+ Name (PSVT, Package()
+ {
+ 2,
+ Package(){\_SB.PCI0.TCPU, \_SB.SEN1, 2, 300, 3032, 9, 0x00010000, 12000, 500, 10, 20, 0},
+ Package(){\_SB.PCI0.TCPU, \_SB.SEN1, 2, 300, 3082, 9, 0x00010000, 9000, 500, 10, 20, 0},
+ Package(){\_SB.PCI0.TCPU, \_SB.SEN1, 2, 300, 3132, 9, 0x00010000, 6000, 500, 10, 20, 0},
+ Package(){\_SB.PCI0.TCPU, \_SB.SEN1, 1, 300, 3232, 9, 0x00010000, "MIN", 500, 10, 20, 0},
+ Package(){\_SB.PCI0.TCPU, \_SB.PCI0.TCPU,1,50,3532, 9, 0x00010000, "MIN", 500, 10, 20, 0}
+ })
+
+}// end Scope(\_SB.IETM)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/SEN1Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/SEN1Participant.asl new file mode 100644 index 0000000000..7050021faf --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/SEN1Participant.asl @@ -0,0 +1,343 @@ +/** @file
+ Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(SEN1)
+ {
+ Name(_HID, EISAID("INT3403")) // Intel DPTF Temperature Sensor Device
+ Name(_UID, "SEN1")
+ Name(_STR, Unicode ("Sensor 1 CPU VR Temp"))
+ Name(PTYP, 0x03)
+
+ Name(FAUX, 0)
+ Name(SAUX, 0)
+ Name(CTYP,0) // Mode
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\S1DE,1)) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _TMP (Temperature)
+ //
+ // This control method returns the thermal zone's current operating temperature.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the current temperature of the thermal zone (in tenths of degrees Kelvin)
+ //
+ Method(_TMP,0,Serialized)
+ {
+
+ Return(3000)
+
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 2)
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+
+
+ // PATx (Participant Programmable Auxiliary Trip) - Sets Aux Trip Point
+ //
+ // The PATx objects shall take a single integer parameter, in tenths of degree Kelvin, which
+ // represents the temperature at which the device should notify the participant driver of
+ // an auxiliary trip event. A PATx control method returns no value.
+ //
+ // Arguments: (1)
+ // Arg0 - temperature in tenths of degree Kelvin
+ // Return Value:
+ // None
+ //
+
+
+ // Thermal Sensor Hysteresis, 2 degrees
+ Name(GTSH, 20)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.SEN1, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius, this could be a platform policy with setup item
+ }
+
+ // _TSP (Thermal Sampling Period)
+ //
+ // Sets the polling interval in 10ths of seconds. A value of 0 tells the driver to use interrupts.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the polling rate in tenths of seconds.
+ // A value of 0 will specify using interrupts through the ACPI notifications.
+ //
+ // The granularity of the sampling period is 0.1 seconds. For example, if the sampling period is 30.0
+ // seconds, then _TSP needs to report 300; if the sampling period is 0.5 seconds, then it will report 5.
+ //
+ Method(_TSP,0,Serialized)
+ {
+ Return(\SSP1)
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\S1AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\S1AT)) // Active Cooling Policy
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ If (LEqual(\S1AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\S1AT),100)) // 10 degrees less than _AC0
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ If (LEqual(\S1AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\S1AT),200)) // 20 degrees less than _AC0
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\S1PT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\S1PT)) // Passive Cooling Policy
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\S1CT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\S1CT))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\S1S3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\S1S3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\S1HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\S1HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.SEN1, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ Store(Arg0, VERS)
+ Store(Arg1, CTYP)
+ Store(Arg2, ALMT)
+ Store(Arg3, PLMT)
+ Store(Arg4, WKLD)
+ Store(Arg5, DSTA)
+ Store(Arg6, RES1)
+ Notify(\_SB.SEN1, 0x91)
+ }
+ }
+
+ } // End SEN1 Device
+}// end Scope(\_SB)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TFN1Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TFN1Participant.asl new file mode 100644 index 0000000000..c3f6e46f39 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TFN1Participant.asl @@ -0,0 +1,138 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(TFN1)
+ {
+ Name(_HID, EISAID("INT3404")) // Intel DPTF Fan Device
+ Name(_UID, "TFN1")
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\DFAN,1)) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _FIF (Fan Information)
+ //
+ // The optional _FIF object provides OSPM with fan device capability information.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A Package containing the fan device parameters.
+ //
+ Method(_FIF)
+ {
+ Return (Package (){
+ 0, // Revision:Integer
+ 1, // FineGrainControl:Integer Boolean
+ 2, // StepSize:Integer DWORD
+ 0 // LowSpeedNotificationSupport:Integer Boolean
+ })
+ }
+
+ // _FPS (Fan Performance States)
+ //
+ // Evaluates to a variable-length package containing a list of packages that describe the fan device's performance states.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A variable-length Package containing a Revision ID and a list of Packages that describe the fan device's performance states.
+ //
+ Method(_FPS,,,,PkgObj)
+ {
+ Return (Package()
+ {
+ 0, // Revision:Integer
+ // Control, TripPoint, Speed, NoiseLevel, Power
+ Package(){100, 0xFFFFFFFF, 12200, 500, 5000},
+ Package(){ 95, 0xFFFFFFFF, 11600, 475, 4750},
+ Package(){ 90, 0xFFFFFFFF, 11100, 450, 4500},
+ Package(){ 85, 0xFFFFFFFF, 10500, 425, 4250},
+ Package(){ 80, 0xFFFFFFFF, 9900, 400, 4000},
+ Package(){ 75, 0xFFFFFFFF, 9300, 375, 3750},
+ Package(){ 70, 0xFFFFFFFF, 8600, 350, 3500},
+ Package(){ 60, 0xFFFFFFFF, 7400, 300, 3000},
+ Package(){ 50, 0xFFFFFFFF, 6200, 250, 2500},
+ Package(){ 40, 0xFFFFFFFF, 4850, 200, 2000},
+ Package(){ 25, 0xFFFFFFFF, 2900, 125, 1250},
+ Package(){ 0, 0xFFFFFFFF, 0, 0, 0} // OFF
+ })
+ }
+
+ // _FSL (Fan Set Level)
+ //
+ // The optional _FSL object is a control method that OSPM evaluates to set a fan device's speed (performance state) to a specific level.
+ //
+ // Arguments: (1)
+ // Arg0 - Level (Integer): conveys to the platform the fan speed level to be set.
+ // Return Value:
+ // None
+ //
+ // Argument Information
+ // Arg0: Level. If the fan supports fine-grained control, Level is a percentage of maximum level (0-100)
+ // that the platform is to engage the fan. If the fan does not support fine-grained control,
+ // Level is a Control field value from a package in the _FPS object's package list.
+ // A Level value of zero causes the platform to turn off the fan.
+ //
+ Method(_FSL,1,Serialized)
+ {
+
+ }
+
+ Name(TFST, Package()
+ {
+ 0, // Revision:Integer
+ 0xFFFFFFFF, // Control:Integer DWORD
+ 0xFFFFFFFF // Speed:Integer DWORD
+ })
+
+ //_FST (Fan Status)
+ //
+ // The optional _FST object provides status information for the fan device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A Package containing fan device status information
+ //
+ Method(_FST,0,Serialized,,PkgObj)
+ {
+
+ Return(TFST)
+ }
+
+ } // End TFN1 Device
+} // End \_SB
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TPwrParticipant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TPwrParticipant.asl new file mode 100644 index 0000000000..a9eef870ff --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TPwrParticipant.asl @@ -0,0 +1,288 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(TPWR) // Power participant
+ {
+ Name(_HID, EISAID("INT3407")) //Intel DPTF platform power device
+ Name(_UID, "TPWR")
+ Name(_STR, Unicode ("Platform Power"))
+ Name(PTYP, 0x11)
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\PWRE,1)) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // _BST (Battery Status)
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A Package containing the battery status in the format below:
+ // Package {
+ // Battery State
+ // Battery Present Rate
+ // Battery Remaining Capacity
+ // Battery Present Voltage
+ // }
+ //
+ Method(_BST,,,,PkgObj)
+ {
+ Return(Package(){0,0,0,0})
+ }
+
+ // _BIX (Battery Information Extended)
+ //
+ // The _BIX object returns the static portion of the Control Method Battery information.
+ // This information remains constant until the battery is changed.
+ // The _BIX object returns all information available via the _BIF object plus additional battery information.
+ // The _BIF object is deprecated in lieu of _BIX in ACPI 4.0.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A Package containing the battery information as described below
+ // Package {
+ // Revision
+ // Power Unit
+ // Design Capacity
+ // Last Full Charge Capacity
+ // Battery Technology
+ // Design Voltage
+ // Design Capacity of Warning
+ // Design Capacity of Low
+ // Cycle Count
+ // Measurement Accuracy
+ // Max Sampling Time
+ // Min Sampling Time
+ // Max Averaging Interval
+ // Min Averaging Interval
+ // Battery Capacity Granularity 1
+ // Battery Capacity Granularity 2
+ // Model Number
+ // Serial Number
+ // Battery Type
+ // OEM Information
+ // Battery Swapping Capability
+ // }
+ //
+ Method(_BIX,,,,PkgObj)
+ {
+ Return(Package(){0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"0","0","0","0",0})
+ }
+
+ // PSOC (Platform State of Charge)
+ //
+ // This object evaluates to the remaining battery state of charge in %.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // remaining battery charge in %
+ //
+ Method(PSOC)
+ {
+
+ Return (0) // EC not available
+
+
+ }
+
+ // PMAX (Platform MAXimum)
+ //
+ // The PMAX object provides maximum power that can be supported by the battery in mW.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // maximum power in mW
+ //
+ Method(PMAX,0,Serialized)
+ {
+
+ Return(0)
+
+ }
+
+ // NPWR (N PoWeR)
+ //
+ // True Platform Power: Could be AC supplied+Battery Pack supplied power or AC supplied.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // Power required to charge battery in mW.
+ //
+ Method(NPWR)
+ {
+ Return(20000) // 20 watts
+ }
+
+ // PSRC (Power SouRCe)
+ //
+ // The PSRC object provides power source type.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value: (enumeration which DPTF driver expects)
+ // 0 = DC
+ // 1 = AC
+ // 2 = USB
+ // 3 = WC
+ //
+ // Notes: (Bitmap from EC)
+ // Bit0=1 if AC
+ // Bit1=1 if USB-PD
+ // Bit2=1 if Wireless Charger
+ //
+ Method(PSRC, 0, Serialized)
+ {
+
+
+ Return(0) // Default return is DC
+
+ }
+
+ // ARTG (Adapter RaTinG)
+ //
+ // The ARTG object provides AC adapter rating in mW.
+ // ARTG should return 0 if PSRC is DC (0).
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // AC adapter rating in mW
+ //
+ Method(ARTG)
+ {
+ If (LEqual(PSRC(),1)) {
+ // AC check
+ Return(90000) // 90 watts
+ } Else {
+ Return(0)
+ }
+ }
+
+ // CTYP (Charger TYPe)
+ //
+ // The CTYP object provides charger type.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // 0x01 = Traditional
+ // 0x02 = Hybrid
+ // 0x03 = NVDC
+ //
+ Method(CTYP)
+ {
+ Return(3)
+ }
+
+ // PROP (Platform Rest Of worst case Power)
+ //
+ // This object provides maximum worst case platform rest of power.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // power in milliwatts
+ //
+ Method(PROP)
+ {
+ Return(25000) // 25 watts
+ }
+
+ // APKP (Ac PeaK Power)
+ //
+ // This object provides maximum adapter power output.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // power in milliwatts
+ //
+ Method(APKP)
+ {
+ Return(90000) // 90 watts
+ }
+
+ // APKT (Ac PeaK Time)
+ //
+ // This object provides the maximum time the adapter can maintain peak power.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // time in milliseconds
+ //
+ Method(APKT)
+ {
+ Return(10) // 10 milliseconds
+ }
+
+ // PBSS (Power Battery Steady State)
+ //
+ // Returns max sustained power for battery.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // power in milliwatts
+ //
+ Method(PBSS)
+ {
+ }
+
+ // DPSP (DPTF Power Sampling Period)
+ //
+ // Sets the polling interval in 10ths of seconds. A value of 0 tells the driver to use event notification for PMAX and PBSS..
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the polling rate in tenths of seconds.
+ // A value of 0 will specify using interrupts through the ACPI notifications.
+ //
+ // The granularity of the sampling period is 0.1 seconds. For example, if the sampling period is 30.0
+ // seconds, then report 300; if the sampling period is 0.5 seconds, then will report 5.
+ //
+ Method(DPSP,0,Serialized)
+ {
+ Return(\PPPR)
+ }
+
+ } // End TPWR Device
+}// end Scope(\_SB)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TcpuParticipant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TcpuParticipant.asl new file mode 100644 index 0000000000..db27cfbf96 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/TcpuParticipant.asl @@ -0,0 +1,568 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0)
+{
+ Device(TCPU) {
+ Name(_ADR, 0x00000001) // Intel Dptf Processor Device 0, Function 1
+
+ Name(GTSH, 20) // Hystersis, 2 Degree clesius
+ Name(LSTM,0) // Last temperature reported
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\DPSR,0)) {
+ Return(0x00)
+ }
+ Return(0x0F)
+ }
+
+ // PPCC (Participant Power Control Capabilities)
+ //
+ // The PPCC object evaluates to a package of packages that indicates to DPTF processor
+ // participant the power control capabilities.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // PPCC package of packages
+ //
+ // PPCC will be initialized by the _INI method with power on default values from the PPM code.
+ //
+ Name (PPCC, Package() {
+ 0x2, //Revision
+ Package () { //Power Limit 1
+ 0, //PowerLimitIndex, 0 for Power Limit 1
+ 1000, //PowerLimitMinimum in mW
+ 15000, //PowerLimitMaximum
+ 1000, //TimeWindowMinimum
+ 1000, //TimeWindowMaximum
+ 250 //StepSize
+ }
+ })
+
+ // _PPC (Performance Present Capabilities)
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the range of states supported
+ // 0 - States 0 through nth state are available (all states available)
+ // 1 - States 1 through nth state are available
+ // 2 - States 2 through nth state are available
+ // ...
+ // n - State n is available only
+ //
+ Name(_PPC,0)
+
+ // SPPC (Set Participant Performance Capability)
+ //
+ // SPPC is a control method object that takes one integer parameter that will indicate the maximum allowable
+ // P-State for OSPM to use at any given time.
+ //
+ // Arguments: (1)
+ // Arg0 - integer
+ // Return Value:
+ // None
+ //
+ Method(SPPC,1,Serialized)
+ {
+ Store ("cpudptf: SPPC Called", Debug)
+ If (CondRefOf(\_PR.CPU0._PPC)) {
+ Store(Arg0,\_PR.CPU0._PPC) // Note: _PPC must be an Integer not a Method
+ }
+ Notify(\_PR.CPU0, 0x80) // Tell P000 driver to re-eval _PPC
+ Notify(\_PR.CPU1, 0x80) // Tell P000 driver to re-eval _PPC
+ Notify(\_PR.CPU2, 0x80) // Tell P000 driver to re-eval _PPC
+ Notify(\_PR.CPU3, 0x80) // Tell P000 driver to re-eval _PPC
+ }
+
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(TCPU, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius, this could be a platform policy with setup item
+ }
+
+ // _PSS (Performance Supported States)
+ //
+ // This optional object indicates to OSPM the number of supported processor performance states that any given system can support.
+ //
+ // Arguments: (1)
+ // None
+ // Return Value:
+ // A variable-length Package containing a list of Pstate sub-packages as described below
+ //
+ // Return Value Information
+ // Package {
+ // PState [0] // Package - Performance state 0
+ // ....
+ // PState [n] // Package - Performance state n
+ // }
+ //
+ // Each Pstate sub-Package contains the elements described below:
+ // Package {
+ // CoreFrequency // Integer (DWORD)
+ // Power // Integer (DWORD)
+ // Latency // Integer (DWORD)
+ // BusMasterLatency // Integer (DWORD)
+ // Control // Integer (DWORD)
+ // Status // Integer (DWORD)
+ // }
+ //
+ Method(_PSS,,,,PkgObj)
+ {
+ Store ("cpudptf: _PSS Called", Debug)
+ If (CondRefOf(\_PR.CPU0._PSS)) {
+ // Ensure _PSS is present
+ Return(\_PR.CPU0._PSS())
+ } Else {
+ Return(Package()
+ {
+ Package(){0,0,0,0,0,0},
+ Package(){0,0,0,0,0,0}
+ })
+ }
+ }
+
+ // _TSS (Throttling Supported States)
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A variable-length Package containing a list of Tstate sub-packages as described below
+ //
+ // Return Value Information
+ // Package {
+ // TState [0] // Package - Throttling state 0
+ // ....
+ // TState [n] // Package - Throttling state n
+ // }
+ //
+ // Each Tstate sub-Package contains the elements described below:
+ // Package {
+ // Percent // Integer (DWORD)
+ // Power // Integer (DWORD)
+ // Latency // Integer (DWORD)
+ // Control // Integer (DWORD)
+ // Status // Integer (DWORD)
+ // }
+ //
+ Method(_TSS,,,,PkgObj)
+ {
+ Store ("cpudptf: _TSS Called", Debug)
+ If (CondRefOf(\_PR.CPU0._TSS)) {
+ // Ensure _TSS is present
+ Return(\_PR.CPU0._TSS())
+ } Else {
+ Return(Package()
+ {
+ Package(){0,0,0,0,0},
+ Package(){0,0,0,0,0}
+ })
+ }
+ }
+
+ // _TPC (Throttling Present Capabilities)
+ //
+ // This optional object is a method that dynamically indicates to OSPM the number of throttling states currently supported by the platform.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the number of states supported:
+ // 0 - states 0 .. nth state available (all states available)
+ // 1 - state 1 .. nth state available
+ // 2 - state 2 .. nth state available
+ // ...
+ // n - state n available only
+ //
+ Method(_TPC)
+ {
+ Store ("cpudptf: _TPC Called", Debug)
+ If (CondRefOf(\_PR.CPU0._TPC)) {
+ Return(\_PR.CPU0._TPC)
+ } Else {
+ Return(0)
+ }
+ }
+
+ // _PTC (Processor Throttling Control)
+ //
+ // _PTC is an optional object that defines a processor throttling control interface alternative to the I/O address spaced-based P_BLK throttling control register (P_CNT)
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A Package as described below
+ //
+ // Return Value Information
+ // Package {
+ // ControlRegister // Buffer (Resource Descriptor)
+ // StatusRegister // Buffer (Resource Descriptor)
+ // }
+ //
+ Method(_PTC)
+ {
+ Store ("cpudptf: _PTC Called", Debug)
+ If (CondRefOf(\_PR.CPU0._PTC)) {
+ Return(\_PR.CPU0._PTC())
+ } Else {
+ Return(Package(){
+ ResourceTemplate (){Register (FFixedHW,0,0,0)},
+ ResourceTemplate (){Register (FFixedHW,0,0,0)}
+ })
+ }
+ }
+
+ // _TSD (T-State Dependency)
+ //
+ // This optional object provides T-state control cross logical processor dependency information to OSPM.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A variable-length Package containing a list of T-state dependency Packages as described below.
+ //
+ // Return Value Information
+ // Package {
+ // NumEntries // Integer
+ // Revision // Integer (BYTE)
+ // Domain // Integer (DWORD)
+ // CoordType // Integer (DWORD)
+ // NumProcessors // Integer (DWORD)
+ // }
+ //
+ Method(_TSD,,,,PkgObj)
+ {
+ Store ("cpudptf: _TSD Called", Debug)
+ If (CondRefOf(\_PR.CPU0._TSD)) {
+ // Ensure _TSD is present
+ Return(\_PR.CPU0._TSD())
+ } Else {
+ Return(Package()
+ {
+ Package(){5,0,0,0,0},
+ Package(){5,0,0,0,0}
+ })
+ }
+ }
+
+ // _TDL (T-state Depth Limit)
+ //
+ // This optional object evaluates to the _TSS entry number of the lowest power throttling state that OSPM may use.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the Throttling Depth Limit _TSS entry number:
+ // 0 - throttling disabled.
+ // 1 - state 1 is the lowest power T-state available.
+ // 2 - state 2 is the lowest power T-state available.
+ // ...
+ // n - state n is the lowest power T-state available.
+ //
+ Method(_TDL)
+ {
+ Store ("cpudptf: _TDL Called", Debug)
+ If (CondRefOf(\_PR.CPU0._TDL)) {
+ Return(\_PR.CPU0._TDL())
+ } Else {
+ Return(0)
+ }
+ }
+
+ // _PDL (P-state Depth Limit)
+ //
+ // This optional object evaluates to the _PSS entry number of the lowest performance P-state that OSPM may use when performing passive thermal control.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the P-state Depth Limit _PSS entry number:
+ // Integer containing the P-state Depth Limit _PSS entry number:
+ // 0 - P0 is the only P-state available for OSPM use
+ // 1 - state 1 is the lowest power P-state available
+ // 2 - state 2 is the lowest power P-state available
+ // ...
+ // n - state n is the lowest power P-state available
+ //
+ Method(_PDL)
+ {
+ Store ("cpudptf: _PDL Called", Debug)
+ If (CondRefOf(\_PR.CPU0._PSS)) {
+ // Ensure _PSS is present
+ // OSSL means OS Selection, WOS is Zero, AOS is One
+ If (LEqual(\OSSL,1)) {
+ Return(Subtract(SizeOf(\_PR.CPU0.SPSS),1)) // PSS entry for AOS
+ } Else {
+ Return(Subtract(SizeOf(\_PR.CPU0.NPSS),1)) // PSS entry for WOS
+ }
+ } Else {
+ Return(0)
+ }
+ }
+
+ // _TSP (Thermal Sampling Period)
+ //
+ // Sets the polling interval in 10ths of seconds. A value of 0 tells the driver to use interrupts.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the polling rate in tenths of seconds.
+ // A value of 0 will specify using interrupts through the ACPI notifications.
+ //
+ // The granularity of the sampling period is 0.1 seconds. For example, if the sampling period is 30.0
+ // seconds, then _TSP needs to report 300; if the sampling period is 0.5 seconds, then it will report 5.
+ //
+ Method(_TSP,0,Serialized)
+ {
+ Return(\CPUS)
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\DPAT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\DPAT)) // Active Cooling Policy
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ If (LEqual(\DPAT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\DPAT),200)) // 20 degrees less than _AC0
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ If (LEqual(\DPAT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(Subtract(\_SB.IETM.CTOK(\DPAT),300)) // 30 degrees less than _AC0
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\DPPT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\DPPT)) // Passive Cooling Policy. Have this in Global NVS
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\DPCT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\DPCT))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\DPC3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\DPC3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\DPHT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\DPHT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0,CTYP)
+ Notify(TCPU, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(CTYP, 0) // Device specific cooling policy type
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ Store(Arg0, VERS)
+ Store(Arg1, CTYP)
+ Store(Arg2, ALMT)
+ Store(Arg3, PLMT)
+ Store(Arg4, WKLD)
+ Store(Arg5, DSTA)
+ Store(Arg6, RES1)
+ Notify(TCPU, 0x91)
+ }
+ }
+
+ } // End Device(TCPU)
+} // End Scope(\_SB.PCI0)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Trt.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Trt.asl new file mode 100644 index 0000000000..f395fdebd6 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Trt.asl @@ -0,0 +1,52 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.IETM)
+{
+ // _TRT (Thermal Relationship Table)
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // A variable-length Package containing a list of Thermal Relationship Packages as described below.
+ //
+ // Return Value Information
+ // Package {
+ // ThermalRelationship[0] // Package
+ // ...
+ // ThermalRelationship[n] // Package
+ // }
+ //
+ Name(_TRT, Package()
+ {
+ // Source Target Influence Period Reserved
+ Package(){\_SB.PCI0.TCPU, \_SB.SEN1, 10, 100, 0, 0, 0, 0}
+ })
+
+ // TRTR (Thermal Relationship Table Revision)
+ //
+ // This object evaluates to an integer value that defines the revision of the _TRT object.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // 0: Traditional TRT as defined by the ACPI Specification.
+ // 1: Priority based TRT
+ //
+ Method(TRTR)
+ {
+ Return(TRTV)
+ }
+
+} // End Scope(\_SB.IETM)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir1Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir1Participant.asl new file mode 100644 index 0000000000..a04bb908fb --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir1Participant.asl @@ -0,0 +1,454 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(VIR1)
+ {
+ Name(_HID, EISAID("INT3409")) // Intel DPTF Virtual Sensor Participant Device
+ Name(_UID, "VIR1")
+ Name(PTYP, 0x15) // TypeVirtualSensor
+ Name(_STR, Unicode ("Top_skin"))
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\VSP1,1)) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 0)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.VIR1, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius
+ }
+
+ Name (VSCT, Package()
+ {
+ 1,
+ Package()
+ {
+ Package () {\_SB.GEN2, 14, 0, 600, 0, 300, 2932},
+ Package () {"NA", 14, 2, 1000, 0, 100, 0}
+ }
+ })
+
+ Name (VSPT, Package()
+ {
+ 1,
+ Package()
+ {
+ Package () {3031, 100},
+ Package () {3131, 50},
+ Package () {3231, 10}
+ }
+ })
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\V1AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Store(\_SB.IETM.CTOK(\V1AT),Local1)
+ If (LGreaterEqual(LSTM,Local1)) {
+ Return(Subtract(Local1,20)) // subtract 2 degrees which is the Hysteresis
+ }
+ Else
+ {
+ Return(Local1)
+ }
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 40))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 80))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC3,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 120))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC4,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 160))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC5,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 200))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC6,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 240))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC7,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 280))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC8,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 320))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC9,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 360))
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\V1PV,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V1PV))
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\V1CR,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V1CR))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\V1C3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V1C3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\V1HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V1HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.VIR1, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(CTYP,0) // Mode
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ Name(CHNG,0) // Semaphore to record policy change
+
+ If (LNotEqual(Arg0, 0)) {
+ Return // unsupported version
+ }
+
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ // bounds check
+ If (LNotEqual(Arg1, CTYP)) {
+ Store(1,CHNG)
+ Store(Arg1, CTYP)
+ }
+ }
+
+ If (LOr(LGreaterEqual(Arg1,0),LLessEqual(Arg1,5))) {
+ // bounds check
+ If (LNotEqual(Arg2, ALMT)) {
+ Store(1, CHNG)
+ Store(Arg2, ALMT)
+ }
+ }
+
+ If (LOr(LGreaterEqual(Arg1,0),LLessEqual(Arg1,5))) {
+ // bounds check
+ If (LNotEqual(Arg3, PLMT)) {
+ Store(1, CHNG)
+ Store(Arg3, PLMT)
+ }
+ }
+
+ If (LNotEqual(Arg4, WKLD)) {
+ Store(1, CHNG)
+ Store(Arg4, WKLD)
+ }
+
+ If (LNotEqual(Arg5, DSTA)) {
+ Store(1,CHNG)
+ Store(Arg5, DSTA)
+ }
+
+ If (LNotEqual(Arg6, RES1)) {
+ Store(1, CHNG)
+ Store(Arg6, RES1)
+ }
+
+ If (CHNG) {
+ // only notify when change occurrs
+ Notify(\_SB.VIR1, 0x91)
+ }
+ } // end Method(DSCP)
+
+ } // End VIR1 Device
+}// end Scope(\_SB)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir2Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir2Participant.asl new file mode 100644 index 0000000000..1974fd5dc1 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir2Participant.asl @@ -0,0 +1,454 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(VIR2)
+ {
+ Name(_HID, EISAID("INT3409")) // Intel DPTF Virtual Sensor Participant Device
+ Name(_UID, "VIR2")
+ Name(PTYP, 0x15) // TypeVirtualSensor
+ Name(_STR, Unicode ("Bot_skin"))
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\VSP2,1)){
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 0)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.VIR2, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius
+ }
+
+ Name (VSCT, Package()
+ {
+ 1,
+ Package()
+ {
+ Package () {\_SB.GEN1, 14, 0, 600, 0, 300, 2932},
+ Package () {"NA", 14, 2, 1000, 0, 100, 0}
+ }
+ })
+
+ Name (VSPT, Package()
+ {
+ 1,
+ Package()
+ {
+ Package () {3031, 100},
+ Package () {3131, 50},
+ Package () {3231, 10}
+ }
+ })
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\V2AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Store(\_SB.IETM.CTOK(\V2AT),Local1)
+ If (LGreaterEqual(LSTM,Local1)) {
+ Return(Subtract(Local1,20)) // subtract 2 degrees which is the Hysteresis
+ }
+ Else
+ {
+ Return(Local1)
+ }
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 40))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 80))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC3,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 120))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC4,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 160))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC5,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 200))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC6,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 240))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC7,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 280))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC8,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 320))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC9,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 360))
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\V2PV,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V2PV))
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\V2CR,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V2CR))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\V2C3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V2C3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\V2HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V2HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.VIR2, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(CTYP,0) // Mode
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ Name(CHNG,0) // Semaphore to record policy change
+
+ If (LNotEqual(Arg0, 0)) {
+ Return // unsupported version
+ }
+
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ // bounds check
+ If (LNotEqual(Arg1, CTYP)) {
+ Store(1,CHNG)
+ Store(Arg1, CTYP)
+ }
+ }
+
+ If (LOr(LGreaterEqual(Arg1,0),LLessEqual(Arg1,5))) {
+ // bounds check
+ If (LNotEqual(Arg2, ALMT)) {
+ Store(1, CHNG)
+ Store(Arg2, ALMT)
+ }
+ }
+
+ If (LOr(LGreaterEqual(Arg1,0),LLessEqual(Arg1,5))) {
+ // bounds check
+ If (LNotEqual(Arg3, PLMT)) {
+ Store(1, CHNG)
+ Store(Arg3, PLMT)
+ }
+ }
+
+ If (LNotEqual(Arg4, WKLD)) {
+ Store(1, CHNG)
+ Store(Arg4, WKLD)
+ }
+
+ If (LNotEqual(Arg5, DSTA)) {
+ Store(1,CHNG)
+ Store(Arg5, DSTA)
+ }
+
+ If (LNotEqual(Arg6, RES1)) {
+ Store(1, CHNG)
+ Store(Arg6, RES1)
+ }
+
+ If (CHNG) {
+ // only notify when change occurrs
+ Notify(\_SB.VIR2, 0x91)
+ }
+ } // end Method(DSCP)
+
+ } // End VIR2 Device
+}// end Scope(\_SB)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir3Participant.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir3Participant.asl new file mode 100644 index 0000000000..54d3c93697 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/DptfAcpiTable/Vir3Participant.asl @@ -0,0 +1,454 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB)
+{
+ Device(VIR3)
+ {
+ Name(_HID, EISAID("INT3409")) // Intel DPTF Virtual Sensor Participant Device
+ Name(_UID, "VIR3")
+ Name(PTYP, 0x15) // TypeVirtualSensor
+ Name(_STR, Unicode ("Ambient"))
+
+ // _STA (Status)
+ //
+ // This object returns the current status of a device.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing a device status bitmap:
+ // Bit 0 - Set if the device is present.
+ // Bit 1 - Set if the device is enabled and decoding its resources.
+ // Bit 2 - Set if the device should be shown in the UI.
+ // Bit 3 - Set if the device is functioning properly (cleared if device failed its diagnostics).
+ // Bit 4 - Set if the battery is present.
+ // Bits 5-31 - Reserved (must be cleared).
+ //
+ Method(_STA)
+ {
+ If (LEqual(\VSP3,1)) {
+ Return(0x0F)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ // Returns Number of Aux Trips available
+ Name(PATC, 0)
+
+ Name(LSTM,0) // Last temperature reported
+
+ // _DTI (Device Temperature Indication)
+ //
+ // Conveys the temperature of a device's internal temperature sensor to the platform when a temperature trip point
+ // is crossed or when a meaningful temperature change occurs.
+ //
+ // Arguments: (1)
+ // Arg0 - An Integer containing the current value of the temperature sensor (in tenths Kelvin)
+ // Return Value:
+ // None
+ //
+ Method(_DTI, 1)
+ {
+ Store(Arg0,LSTM)
+ Notify(\_SB.VIR3, 0x91) // notify the participant of a trip point change event
+ }
+
+ // _NTT (Notification Temperature Threshold)
+ //
+ // Returns the temperature change threshold for devices containing native temperature sensors to cause
+ // evaluation of the _DTI object
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the temperature threshold in tenths of degrees Kelvin.
+ //
+ Method(_NTT, 0)
+ {
+ Return(2782) // 5 degree Celcius
+ }
+
+ Name (VSCT, Package()
+ {
+ 1,
+ Package()
+ {
+ Package () {\_SB.GEN3, 14, 0, 500, 0, 200, 2932},
+ Package () {\_SB.GEN4, 14, 0, 500, 0, 300, 2932}
+ }
+ })
+
+ Name (VSPT, Package()
+ {
+ 1,
+ Package()
+ {
+ Package () {3031, 100},
+ Package () {3131, 50},
+ Package () {3231, 10}
+ }
+ })
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\V3AT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Store(\_SB.IETM.CTOK(\V3AT),Local1)
+ If (LGreaterEqual(LSTM,Local1)) {
+ Return(Subtract(Local1,20)) // subtract 2 degrees which is the Hysteresis
+ }
+ Else
+ {
+ Return(Local1)
+ }
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC1,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 40))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC2,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 80))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC3,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 120))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC4,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 160))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC5,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 200))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC6,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 240))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC7,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 280))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC8,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 320))
+ }
+
+ // _ACx (Active Cooling)
+ //
+ // This optional object, if present under a thermal zone, returns the
+ // temperature trip point at which OSPM must start or stop Active cooling,
+ // where x is a value between 0 and 9 that designates multiple active cooling levels of the thermal zone.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the active cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_AC9,0,Serialized)
+ {
+ Return(Subtract(_AC0(), 360))
+ }
+
+ // _PSV (Passive)
+ //
+ // This optional object, if present under a thermal zone, evaluates to the temperature
+ // at which OSPM must activate passive cooling policy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the passive cooling temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\V3PV,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V3PV))
+ }
+
+ // _CRT (Critical Temperature)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM must shutdown the system.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\V3CR,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V3CR))
+ }
+
+ // _CR3 (Critical Temperature for S3/CS)
+ //
+ // This object, when defined under a thermal zone, returns the critical temperature at which OSPM
+ // must transition to Standby or Connected Standy.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the critical temperature threshold in tenths of degrees Kelvin
+ //
+ Method(_CR3,0,Serialized)
+ {
+ If (LEqual(\V3C3,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V3C3))
+ }
+
+ // _HOT (Hot Temperature)
+ //
+ // This optional object, when defined under a thermal zone, returns the critical temperature
+ // at which OSPM may choose to transition the system into the S4 sleeping state.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // The return value is an integer that represents the critical sleep threshold tenths of degrees Kelvin.
+ //
+ Method(_HOT,0,Serialized)
+ {
+ If (LEqual(\V3HT,0)) {Return(0xFFFFFFFF)} // signal DPTF driver to disable trip point
+ Return(\_SB.IETM.CTOK(\V3HT))
+ }
+
+ // _SCP (Set Cooling Policy)
+ //
+ // Arguments: (3)
+ // Arg0 - Mode An Integer containing the cooling mode policy code
+ // Arg1 - AcousticLimit An Integer containing the acoustic limit
+ // Arg2 - PowerLimit An Integer containing the power limit
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode - 0 = Active, 1 = Passive
+ // Acoustic Limit - Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit - Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ //
+ Method(_SCP, 3, Serialized)
+ {
+ If (LOr(LEqual(Arg0,0),LEqual(Arg0,1))) {
+ Store(Arg0, CTYP)
+ Notify(\_SB.VIR3, 0x91)
+ }
+ }
+
+ Name(VERS,0) // Version
+ Name(CTYP,0) // Mode
+ Name(ALMT,0) // Acoustic Limit
+ Name(PLMT,0) // Power Limit
+ Name(WKLD,0) // Workload Hint
+ Name(DSTA,0) // Device State Hint
+ Name(RES1,0) // Reserved 1
+
+ // DSCP (DPTF Set Cooling Policy)
+ //
+ // Arguments: (7)
+ // Arg0 - Version: For DPTF 8.0, this value is always 0.
+ // Arg1 - Mode: Integer containing the cooling mode policy code
+ // Arg2 - Acoustic Limit: Acoustic Limit value as defined in ACPI specification
+ // Arg3 - Power Limit: Power Limit value as defined in ACPI specification
+ // Arg4 - Workload Hint: Arbitrary Platform defined Integer that indicates to the platform the type of workload run in the OS.
+ // Arg5 - Device State Hint: An integer value that indicates the state of the device.
+ // Arg6 - Reserved 1
+ // Return Value:
+ // None
+ //
+ // Argument Information:
+ // Mode: 0 = Active(Typically AC Power Source), 1 = Passive(Typically Battery Power Source)
+ // Acoustic Limit: Specifies the maximum acceptable acoustic level that active cooling devices may generate.
+ // Values are 1 to 5 where 1 means no acoustic tolerance and 5 means maximum acoustic tolerance.
+ // Power Limit: Specifies the maximum acceptable power level that active cooling devices may consume.
+ // Values are from 1 to 5 where 1 means no power may be used to cool and 5 means maximum power may be used to cool.
+ // Workload Hint: Refer to Intel DPTF Configuration Guide on how to set this value for various workloads for each Operating System.
+ // Device State Hint: An integer value that indicates the state of the device.
+ // First byte indicates portrait or landscape mode.
+ // Second byte indicates horizontal or vertical orientation.
+ // Third byte indicates proximity sensor status (if available).
+ // Fourth byte is unused.
+ // xxxxxx00h: Portrait
+ // xxxxxx01h: Landscape
+ // xxxx00xxh: Horizontal
+ // xxxx01xxh: Vertical
+ // xx00xxxxh: Proximity sensor Off (Device not in proximity to user)
+ // xx01xxxxh: Proximity sensor On (Device in proximity to user)
+ //
+ Method(DSCP, 7, Serialized)
+ {
+ Name(CHNG,0) // Semaphore to record policy change
+
+ If (LNotEqual(Arg0, 0)) {
+ Return // unsupported version
+ }
+
+ If (LOr(LEqual(Arg1,0),LEqual(Arg1,1))) {
+ // bounds check
+ If (LNotEqual(Arg1, CTYP)) {
+ Store(1,CHNG)
+ Store(Arg1, CTYP)
+ }
+ }
+
+ If (LOr(LGreaterEqual(Arg1,0),LLessEqual(Arg1,5))) {
+ // bounds check
+ If (LNotEqual(Arg2, ALMT)) {
+ Store(1, CHNG)
+ Store(Arg2, ALMT)
+ }
+ }
+
+ If (LOr(LGreaterEqual(Arg1,0),LLessEqual(Arg1,5))) {
+ // bounds check
+ If (LNotEqual(Arg3, PLMT)) {
+ Store(1, CHNG)
+ Store(Arg3, PLMT)
+ }
+ }
+
+ If (LNotEqual(Arg4, WKLD)) {
+ Store(1, CHNG)
+ Store(Arg4, WKLD)
+ }
+
+ If (LNotEqual(Arg5, DSTA)) {
+ Store(1,CHNG)
+ Store(Arg5, DSTA)
+ }
+
+ If (LNotEqual(Arg6, RES1)) {
+ Store(1, CHNG)
+ Store(Arg6, RES1)
+ }
+
+ If (CHNG) {
+ // only notify when change occurrs
+ Notify(\_SB.VIR3, 0x91)
+ }
+ } // end Method(DSCP)
+
+ } // End VIR3 Device
+}// end Scope(\_SB)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Facp/Facp.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Facp/Facp.aslc new file mode 100644 index 0000000000..3123cd16e6 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Facp/Facp.aslc @@ -0,0 +1,182 @@ +/** @file
+ Fixed ACPI Description Table
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiDxe.h>
+#include <IndustryStandard/Acpi50.h>
+#include "AcpiTablePlatform.h"
+
+EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE FACP = {
+ {
+ EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE,
+ sizeof (EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE),
+ EFI_ACPI_5_0_FIXED_ACPI_DESCRIPTION_TABLE_REVISION,
+ 0, // To make sum of entire table == 0
+ EFI_ACPI_OEM_ID, // OEMID is a 6 bytes long field
+ EFI_ACPI_OEM_TABLE_ID, // OEM table identification (8 bytes long)
+ EFI_ACPI_OEM_REVISION, // OEM revision number
+ EFI_ACPI_CREATOR_ID, // ASL compiler vendor ID
+ EFI_ACPI_CREATOR_REVISION // ASL compiler revision number
+ },
+ 0, // Physical addesss of FACS
+ 0, // Physical address of DSDT
+ INT_MODEL, // System Interrupt Model (ignored in 2k and later, must be 0 for 98)
+ PM_PROFILE, // Preferred PM Profile
+ SCI_INT_VECTOR, // System vector of SCI interrupt
+ SMI_CMD_IO_PORT, // Port address of SMI command port
+ ACPI_ENABLE, // value to write to port smi_cmd to enable ACPI
+ ACPI_DISABLE, // value to write to port smi_cmd to disable ACPI
+ S4BIOS_REQ, // Value to write to SMI CMD port to enter the S4BIOS state
+ PSTATE_CNT, // PState control
+ PM1a_EVT_BLK, // Port address of Power Mgt 1a Event Reg Blk
+ PM1b_EVT_BLK, // Port address of Power Mgt 1b Event Reg Blk
+ PM1a_CNT_BLK, // Port address of Power Mgt 1a Ctrl Reg Blk
+ PM1b_CNT_BLK, // Port address of Power Mgt 1b Ctrl Reg Blk
+ PM2_CNT_BLK, // Port address of Power Mgt 2 Ctrl Reg Blk
+ PM_TMR_BLK, // Port address of Power Mgt Timer Ctrl Reg Blk
+ GPE0_BLK, // Port address of General Purpose Event 0 Reg Blk
+ GPE1_BLK, // Port address of General Purpose Event 1 Reg Blk
+ PM1_EVT_LEN, // Byte Length of ports at pm1X_evt_blk
+ PM1_CNT_LEN, // Byte Length of ports at pm1X_cnt_blk
+ PM2_CNT_LEN, // Byte Length of ports at pm2_cnt_blk
+ PM_TM_LEN, // Byte Length of ports at pm_tm_blk
+ GPE0_BLK_LEN, // Byte Length of ports at gpe0_blk
+ GPE1_BLK_LEN, // Byte Length of ports at gpe1_blk
+ GPE1_BASE, // Offset in gpe model where gpe1 events start
+ CST_CNT, // _CST support
+ P_LVL2_LAT, // Worst case HW latency to enter/exit C2 state
+ P_LVL3_LAT, // Worst case HW latency to enter/exit C3 state
+ FLUSH_SIZE, // Size of area read to flush caches
+ FLUSH_STRIDE, // Stride used in flushing caches
+ DUTY_OFFSET, // Bit location of duty cycle field in p_cnt reg
+ DUTY_WIDTH, // Bit width of duty cycle field in p_cnt reg
+ DAY_ALRM, // Index to day-of-month alarm in RTC CMOS RAM
+ MON_ALRM, // Index to month-of-year alarm in RTC CMOS RAM
+ CENTURY, // Index to century in RTC CMOS RAM
+ IAPC_BOOT_ARCH, // IA-PCI Boot Architecture Flag
+ RESERVED, // Reserved
+ FLAG,
+ {
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 8,
+ 0,
+ 0,
+ 0xCF9
+ },
+ 0x06, // Hardware reset value
+ 0, 0, 0, // Reserved
+ 0, // XFirmwareCtrl
+ 0, // XDsdt
+ //
+ // X_PM1a Event Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x10,
+ 0x00,
+ EFI_ACPI_3_0_WORD,
+ PM1a_EVT_BLK,
+
+ //
+ // X_PM1b Event Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x00,
+ 0x00,
+ EFI_ACPI_RESERVED_BYTE,
+ PM1b_EVT_BLK,
+
+ //
+ // X_PM1a Control Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x10,
+ 0x00,
+ EFI_ACPI_5_0_WORD,
+ PM1a_CNT_BLK,
+
+ //
+ // X_PM1b Control Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x00,
+ 0x00,
+ EFI_ACPI_5_0_UNDEFINED,
+ PM1b_CNT_BLK,
+
+ //
+ // X_PM2 Control Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x08,
+ 0x00,
+ EFI_ACPI_5_0_BYTE,
+ PM2_CNT_BLK,
+
+ //
+ // X_PM Timer Control Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x20,
+ 0x00,
+ EFI_ACPI_5_0_DWORD,
+ PM_TMR_BLK,
+
+ //
+ // X_General Purpose Event 0 Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x100,
+ 0x00,
+ EFI_ACPI_5_0_BYTE,
+ GPE0_BLK,
+
+ //
+ // X_General Purpose Event 1 Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x00,
+ 0x00,
+ EFI_ACPI_5_0_UNDEFINED,
+ GPE1_BLK,
+
+ //
+ // Sleep Control Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x08,
+ 0x00,
+ EFI_ACPI_5_0_BYTE,
+ 0x405,
+
+ //
+ // Sleep Status Register Block
+ //
+ EFI_ACPI_5_0_SYSTEM_IO,
+ 0x08,
+ 0x00,
+ EFI_ACPI_5_0_BYTE,
+ 0x401,
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&FACP;
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Facs/Facs.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Facs/Facs.aslc new file mode 100644 index 0000000000..8bb6cfebde --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Facs/Facs.aslc @@ -0,0 +1,77 @@ +/** @file
+ Firmware ACPI Control Structure Table
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// Statements that include other files
+//
+
+#include <PiDxe.h>
+#include <IndustryStandard/Acpi50.h>
+#include "AcpiTablePlatform.h"
+
+EFI_ACPI_5_0_FIRMWARE_ACPI_CONTROL_STRUCTURE FACS = {
+ EFI_ACPI_5_0_FIRMWARE_ACPI_CONTROL_STRUCTURE_SIGNATURE,
+ sizeof (EFI_ACPI_5_0_FIRMWARE_ACPI_CONTROL_STRUCTURE),
+
+ //
+ // Hardware Signature will be updated at runtime
+ //
+ 0x00000000, //HardwareSignature
+ 0x00000000, //FirmwareWakingVector
+ 0x00000000, //GlobalLock
+ 0x00000000, //Flags
+ 0x0000000000000000, //XFirmwareWakingVector
+ EFI_ACPI_5_0_FIRMWARE_ACPI_CONTROL_STRUCTURE_VERSION,
+ EFI_ACPI_RESERVED_BYTE, //Reserved0[3]
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ 0x00000000, //OspmFlags
+ EFI_ACPI_RESERVED_BYTE, //Reserved1[24]
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&FACS;
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/GloblNvs.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/GloblNvs.asl new file mode 100644 index 0000000000..b2f6f56093 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/GloblNvs.asl @@ -0,0 +1,478 @@ +/** @file
+ ACPI GNVS
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ //
+ // Define a Global region of ACPI NVS Region that may be used for any
+ // type of implementation. The starting offset and size will be fixed
+ // up by the System BIOS during POST. Note that the Size must be a word
+ // in size to be fixed up correctly.
+ //
+
+ OperationRegion(GNVS, SystemMemory, 0xFFFF0000, 0xAA55)
+ Field(GNVS, AnyAcc, Lock, Preserve)
+ {
+ Offset(0), // Miscellaneous Dynamic Registers:
+// Name-----Size-------Offset----Description
+ OSYS, 16, // (00) Operating System
+ LIDS, 8, // (02) Lid State (Lid Open = 1)
+ PWRS, 8, // (03) Power State (AC Mode = 1)
+ ACTT, 8, // (04) Active Trip Point
+ CRTT, 8, // (05) Critical Trip Point
+ DTS1, 8, // (06) Digital Thermal Sensor 1 Reading
+ DTS2, 8, // (07) Digital Thermal Sensor 2 Reading
+ APIC, 8, // (08) APIC Enabled by SBIOS (APIC Enabled = 1)
+ MPEN, 8, // (09) Number of Logical Processors if MP Enabled != 0
+ CADL, 8, // (10) Current Attached Device List
+ CSTE, 16, // (11) Current Display State
+ NSTE, 16, // (13) Next Display State
+ NDID, 8, // (15) Number of Valid Device IDs
+ DID1, 32, // (16) Device ID 1
+ DID2, 32, // (20) Device ID 2
+ DID3, 32, // (24) Device ID 3
+ DID4, 32, // (28) Device ID 4
+ DID5, 32, // (32) Device ID 5
+ BLCS, 8, // (36) Backlight Control Support
+ BRTL, 8, // (37) Brightness Level Percentage
+ ALSE, 8, // (38) ALS Enable
+ MORD, 8, // (39) Memory Overwrite Request Data
+ PPRP, 32, // (40) Physical Presence request operation response
+ PPRQ, 8, // (44) Physical Presence request operation
+ LPPR, 8, // (45) Last Physical Presence request operation
+ BDID, 8, // (46) Platform board id
+ ASLB, 32, // (47) IGD OpRegion base address
+ IBTT, 8, // (51) IGD Boot Display Device
+ IPAT, 8, // (52) IGD Panel Type CMOs option
+ ITVF, 8, // (53) IGD TV Format CMOS option
+ ITVM, 8, // (54) IGD TV Minor Format CMOS option
+ IPSC, 8, // (55) IGD Panel Scaling
+ IBLC, 8, // (56) IGD BLC Configuration
+ IBIA, 8, // (57) IGD BIA Configuration
+ ISSC, 8, // (58) IGD SSC Configuration
+ I409, 8, // (59) IGD 0409 Modified Settings Flag
+ I509, 8, // (60) IGD 0509 Modified Settings Flag
+ I609, 8, // (61) IGD 0609 Modified Settings Flag
+ I709, 8, // (62) IGD 0709 Modified Settings Flag
+ IDMS, 8, // (63) IGD DVMT Memory Size
+ IF1E, 8, // (64) IGD Function 1 Enable
+ GSMI, 8, // (65) GMCH SMI/SCI mode (0=SCI)
+ PAVP, 8, // (66) IGD PAVP data
+ OSCC, 8, // (67) PCIE OSC Control
+ NEXP, 8, // (68) Native PCIE Setup Value
+ DSEN, 8, // (69) _DOS Display Support Flag.
+ GPIC, 8, // (70) Global IOAPIC/8259 Interrupt Mode Flag.
+ CTYP, 8, // (71) Global Cooling Type Flag.
+ L01C, 8, // (72) Global L01 Counter.
+ DID6, 32, // (73) Device ID 6
+ DID7, 32, // (77) Device ID 7
+ DID8, 32, // (81) Device ID 8
+ DID9, 32, // (85) Device ID 9
+ DIDA, 32, // (89) Device ID 10
+ DIDB, 32, // (93) Device ID 11
+ DIDC, 32, // (97) Device ID 12
+ DIDD, 32, // (101) Device ID 13
+ DIDE, 32, // (105) Device ID 14
+ DIDF, 32, // (109) Device ID 15
+ NHLA, 32, // (113) HD-Audio NHLT ACPI address
+ NHLL, 32, // (117) HD-Audio NHLT ACPI length
+ ADFM, 32, // (121) HD-Audio DSP Feature Mask
+ PFLV, 8, // (125) Platform Flavor
+ BREV, 8, // (126) Board Rev
+ XHCI, 8, // (127) xHCI controller mode
+ PMEN, 8, // (128) PMIC enable/disable
+ IPUD, 8, // (129) IPU device Acpi type -- 0: Auto; 1: Acpi Igfx; 2: Acpi no Igfx
+ U21A, 32, // (130) HSUART2 BAR1
+ GP0A, 32, // (134) GPIO0 BAR
+ GP0L, 32, // (138) GPIO0 BAR Length
+ GP1A, 32, // (142) GPIO1 BAR
+ GP1L, 32, // (146) GPIO1 BAR Length
+ GP2A, 32, // (150) GPIO2 BAR
+ GP2L, 32, // (154) GPIO2 BAR Length
+ GP3A, 32, // (158) GPIO3 BAR
+ GP3L, 32, // (162) GPIO3 BAR Length
+ GP4A, 32, // (166) GPIO4 BAR
+ GP4L, 32, // (170) GPIO4 BAR Length
+ eM0A, 32, // (174) eMMC BAR0
+ eM0L, 32, // (178) eMMC BAR0 Length
+ eM1A, 32, // (182) eMMC BAR1
+ eM1L, 32, // (186) eMMC BAR1 Length
+ DPTE, 8, // (190) DPTF Enable
+ S0DE, 8, // (191) EnableSen0Participant
+ S0PT, 8, // (192) PassiveThermalTripPointSen0
+ S0C3, 8, // (193) CriticalThermalTripPointSen0S3
+ S0HT, 8, // (194) HotThermalTripPointSen0
+ S0CT, 8, // (195) CriticalThermalTripPointSen0
+ CHGE, 8, // (196) DptfChargerDevice
+ DDSP, 8, // (197) DPTFDisplayDevice
+ DFAN, 8, // (198) DPTF Fan device
+ DPSR, 8, // (199) DPTF Processor device
+ DPCT, 32, // (200) DPTF Processor participant critical temperature
+ DPPT, 32, // (204) DPTF Processor participant passive temperature
+ DGC0, 32, // (208) DPTF Generic sensor0 participant critical temperature
+ DGP0, 32, // (212) DPTF Generic sensor0 participant passive temperature
+ DGC1, 32, // (216) DPTF Generic sensor1 participant critical temperature
+ DGP1, 32, // (220) DPTF Generic sensor1 participant passive temperature
+ DGC2, 32, // (224) DPTF Generic sensor2 participant critical temperature
+ DGP2, 32, // (228) DPTF Generic sensor2 participant passive temperature
+ DGC3, 32, // (232) DPTF Generic sensor3 participant critical temperature
+ DGP3, 32, // (236) DPTF Generic sensor3 participant passive temperature
+ DGC4, 32, // (240) DPTF Generic sensor3 participant critical temperature
+ DGP4, 32, // (244) DPTF Generic sensor3 participant passive temperature
+ DLPM, 8, // (248) DPTF Current low power mode setting
+ DSC0, 32, // (249) DPTF Critical threshold0 for SCU
+ DSC1, 32, // (253) DPTF Critical threshold1 for SCU
+ DSC2, 32, // (257) DPTF Critical threshold2 for SCU
+ DSC3, 32, // (261) DPTF Critical threshold3 for SCU
+ DSC4, 32, // (265) DPTF Critical threshold4 for SCU
+ , 8, // (269) Reserved
+ LPOE, 32, // (270) DPTF LPO Enable
+ LPPS, 32, // (274) P-State start index
+ LPST, 32, // (278) Step size
+ LPPC, 32, // (282) Power control setting
+ LPPF, 32, // (286) Performance control setting
+ DPME, 8, // (290) DPTF DPPM enable/disable
+ BCSL, 8, // (291) Battery charging solution 0-CLV 1-ULPMC
+ TPMA, 32, // (292) TPM Base Address
+ TPML, 32, // (296) TPM Length
+ PSSD, 8, // (300) PSS Device: 0 - None, 1 - Monzax 2K, 2 - Monzax 8K
+ MDMS, 8, // (301) Modem selection: 0: Disabled, 1: 7260; 2: 7360;
+ GPSM, 8, // (302) GNSS/GPS mode selection, 0: LPSS mode, 1: ISH mode
+ ADPM, 32, // (303) Hd-Audio DSP Post-Processing Module Mask
+ OSSL, 8, // (307) OS Selection 0: WOS 1:AOS: 2:Legacy OS
+ WIFD, 8, // (308) Wi-Fi Device Select 0: Lightning Peak 1: Broadcom: only used by BXT-M
+ DD1A, 32, // (309) IPC Bar0 Address
+ DD1L, 32, // (313) IPC Bar0 Length
+ DD3A, 32, // (317) IPC Bar1 Address
+ DD3L, 32, // (321) IPC Bar1 Length
+ BMDA, 32, // (325) IPC BIOS mail box data
+ BMIA, 32, // (329) IPC BIOS mail box interface
+ P2BA, 32, // (333) P2SB Base Address: only used by BXT-M
+ EDPV, 8, // (337) Check for eDP display device: only used by BXT-M
+ DIDX, 32, // (338) Device ID for eDP device: only used by BXT-M
+ EPCS, 8, // (342) SGX Feature Status
+ EMNA, 64, // (343) SGX Feature PRMRR Base address
+ ELNG, 64, // (351) SGX Feature PRMRR Length (854-861)
+ WCAS, 8, // (359) 0 - Disable, 1 - IMX214, 2 - IMX135
+ UCAS, 8, // (360) 0 - Disable, 1 - OV2740
+ ADOS, 8, // (361) 0 - Disable, 1 - WM8281, 2 - WM8998
+//------------------Delta between BXTM and BXTP--------------------
+ D11A, 32, // (362) DMA1 BAR1
+ D11L, 32, // (366) DMA1 BAR1 Length >> Not used in BXT
+ ECDB, 8, // (370) [CSDebugLightEC] EC Debug Light (CAPS LOCK) for when in Low Power S0 Idle State
+ ECLP, 8, // (371) EC Low Power Mode: 1 - Enabled, 0 - Disabled
+ ECNO, 8, // (372) [CSNotifyEC] EC Notification of Low Power S0 Idle State
+ EMOD, 8, // (373) Enable / Disable Modern Standby Mode
+ I21A, 32, // (374) I2C2 BAR1
+ I21L, 32, // (378) I2C2 BAR1 Length
+ I31A, 32, // (382) I2C3 BAR1
+ I31L, 32, // (386) I2C3 BAR1 Length
+ I41A, 32, // (390) I2C4 BAR1
+ I41L, 32, // (394) I2C4 BAR1 Length
+ I51A, 32, // (398) I2C5 BAR1
+ I51L, 32, // (402) I2C5 BAR1 Length
+ I61A, 32, // (406) I2C6 BAR1
+ I61L, 32, // (410) I2C6 BAR1 Length
+ I71A, 32, // (414) I2C7 BAR1
+ I71L, 32, // (418) I2C7 BAR1 Length
+ OTG0, 32, // (422) USB OTG BAR0
+ OTG1, 32, // (426) USB OTG BAR1
+ P10A, 32, // (430) PWM1 BAR0
+ P10L, 32, // (434) PWM1 BAR0 Length
+ P11A, 32, // (438) PWM1 BAR1
+ P11L, 32, // (442) PWM1 BAR1 Length
+ P21A, 32, // (446) PWM2 BAR1
+ P21L, 32, // (450) PWM2 BAR1 Length >> Not used in BXT
+ P80D, 32, // (454) Port 80 Debug Port Value
+ PEP0, 8, // (458) [Rtd3P0dl] User selectable Delay for Device D0 transition.
+ PEPC, 16, // (459) [LowPowerS0IdleConstraint] PEP Constraints
+ // Bit[1:0] - SATA (0:None, 1:SATA Ports[all], 2:SATA Controller)
+ // [2] - En/Dis UART 0
+ // [3] - UART 1
+ // [4] - SDIO
+ // [5] - I2C 0
+ // [6] - I2C 1
+ // [7] - XHCI
+ // [8] - HD Audio (includes ADSP)
+ // [9] - Gfx
+ // [10] - EMMC
+ // [11] - SDXC
+ // [12] - CPU
+ PEPY, 8, // (461) [PepList] RTD3 PEP support list(BIT0 - GFx , BIT1 - Sata, BIT2 - UART, BIT3 - SDHC, Bit4 - I2C0, BIT5 - I2C1, Bit6 - XHCI, Bit7 - Audio)
+ PLCS, 8, // (462) [PL1LimitCS] set PL1 limit when entering CS
+ PLVL, 16, // (463) [PL1LimitCSValue] PL1 limit value
+ PSCP, 8, // (465) [PstateCapping] P-state Capping
+ PSVT, 8, // (466) Passive Trip Point
+ RCG0, 16, // (467) [RTD3Config0] RTD3 Config Setting
+ //(BIT0:ZPODD,BIT1:USB Camera Port4, BIT2/3:SATA Port3, Bit4/5:Sata Port1/2, Bit6:Card Reader, Bit7:WWAN, Bit8:WSB SIP FAB1 Card reader)
+ RTD3, 8, // (469) Runtime D3 support.
+ S0ID, 8, // (470) [LowPowerS0Idle] Low Power S0 Idle Enable
+ S21A, 32, // (471) SPI2 BAR1
+ S21L, 32, // (475) SPI2 BAR1 Length
+ S31A, 32, // (479) SPI3 BAR1
+ S31L, 32, // (483) SPI3 BAR1 Length
+ SD1A, 32, // (487) SDCard BAR1
+ SD1L, 32, // (491) SDCard BAR1 Length
+ SI1A, 32, // (495) SDIO BAR1
+ SI1L, 32, // (499) SDIO BAR1 Length
+ SP1A, 32, // (503) SPI BAR1
+ SP1L, 32, // (507) SPI BAR1 Length
+ SPST, 8, // (511) [SataPortState] SATA port state, Bit0 - Port0, Bit1 - Port1, Bit2 - Port2, Bit3 - Port3
+ U11A, 32, // (512) HSUART BAR1
+ U11L, 32, // (516) HSUART BAR1 Length
+ U21L, 32, // (520) HSUART2 BAR1 Length
+ W381, 8, // (524) WPCN381U: only used by BXT-P
+ ECON, 8, // (525) Embedded Controller Availability Flag.
+ PB1E, 8, // (526) 10sec Power button support
+ // Bit0: 10 sec P-button Enable/Disable
+ // Bit1: Internal Flag
+ // Bit2: Rotation Lock flag, 0:unlock, 1:lock
+ // Bit3: Slate/Laptop Mode Flag, 0: Slate, 1: Laptop
+ // Bit4: Undock / Dock Flag, 0: Undock, 1: Dock
+ // Bit5: VBDL Flag. 0: VBDL is not called, 1: VBDL is called, Virtual Button Driver is loaded.
+ // Bit6: Reserved for future use.
+ // Bit7: EC 10sec PB Override state for S3/S4 wake up.
+ DBGS, 8, // (527) Debug State
+ IPUA, 32, // (528) IPU Base Address
+ BNUM, 8, // (532) Number of batteries
+ B0SC, 8, // (533) Battery 0 Stored Capacity
+ ECR1, 8, // (534) PciDelayOptimizationEcr
+ HVCO, 8, // (535) HPLL VCO
+ UBCB, 32, // (536) USB Type C OpRegion base address
+ SBTD, 8, // (540) SelectBtDevice
+ //
+ // DPPM Devices and trip points
+ //
+ DPAT, 32, // (541) DptfProcActiveTemperature
+ , 8, //
+ , 8, //
+ , 8, //
+ , 8, //
+ , 8, //
+ Offset(550),
+ S1DE, 8, // (550) EnableSen1Participant
+ S1AT, 8, // (551) ActiveThermalTripPointSen1
+ S1PT, 8, // (552) PassiveThermalTripPointSen1
+ S1CT, 8, // (553) CriticalThermalTripPointSen1
+ SSP1, 8, // (554) SensorSamplingPeriodSen1
+ //
+ // DPPM Policies
+ //
+ DPAP, 8, // (555) EnableActivePolicy
+ DPPP, 8, // (556) EnablePassivePolicy
+ DPCP, 8, // (557) EnableCriticalPolicy
+ , 8, // (558) DPTF Reserved
+
+ TC1V, 8, // (559) Passive Trip Point TC1 Value
+ TC2V, 8, // (560) Passive Trip Point TC2 Value
+ TSPV, 8, // (561) Passive Trip Point TSP Value
+ DTSE, 8, // (562) Digital Thermal Sensor Enable
+ , 8, // (563) Dptf Reserved
+ IGDS, 8, // (564) IGD State
+ HPME, 8, // (565) Enable/Disable HighPerformance mode for Dptf
+ WWEN, 8, // (566) WWAN Enable
+ //
+ // Offset (567) to (572) used by BXT-M DPTF
+ //
+ Offset(573),
+ PASL, 8, // (573) Panel AOB 0 - Disable, 1 - TIANMA , 2 - TRULY Fab B TypeC, 3 - TRULY Fab B, 4 -TRULY Fab B Command Mode, 5 - TRULY Fab B Command Mode TypeC
+ IRMC, 8, // (574) IRMT CONFIGURATION
+ CPUS, 8, // (575) ThermalSamplingPeriodTCPU
+ STEP, 8, // (576) BXT Stepping ID
+ RVD1, 8, // (577) Reserved
+ LTR1, 8, // (578) Latency Tolerance Reporting Enable
+ LTR2, 8, // (579) Latency Tolerance Reporting Enable
+ LTR3, 8, // (580) Latency Tolerance Reporting Enable
+ LTR4, 8, // (581) Latency Tolerance Reporting Enable
+ LTR5, 8, // (582) Latency Tolerance Reporting Enable
+ LTR6, 8, // (583) Latency Tolerance Reporting Enable
+ OBF1, 8, // (584) Optimized Buffer Flush and Fill
+ OBF2, 8, // (585) Optimized Buffer Flush and Fill
+ OBF3, 8, // (586) Optimized Buffer Flush and Fill
+ OBF4, 8, // (587) Optimized Buffer Flush and Fill
+ OBF5, 8, // (588) Optimized Buffer Flush and Fill
+ OBF6, 8, // (589) Optimized Buffer Flush and Fill
+ RPA1, 32, // (590) Root Port address 1
+ RPA2, 32, // (594) Root Port address 2
+ RPA3, 32, // (598) Root Port address 3
+ RPA4, 32, // (602) Root Port address 4
+ RPA5, 32, // (606) Root Port address 5
+ RPA6, 32, // (610) Root Port address 6
+ PML1, 16, // (614) PCIE LTR max snoop Latency 1
+ PML2, 16, // (616) PCIE LTR max snoop Latency 2
+ PML3, 16, // (618) PCIE LTR max snoop Latency 3
+ PML4, 16, // (620) PCIE LTR max snoop Latency 4
+ PML5, 16, // (622) PCIE LTR max snoop Latency 5
+ PML6, 16, // (624) PCIE LTR max snoop Latency 6
+ PNL1, 16, // (626) PCIE LTR max no snoop Latency 1
+ PNL2, 16, // (628) PCIE LTR max no snoop Latency 2
+ PNL3, 16, // (630) PCIE LTR max no snoop Latency 3
+ PNL4, 16, // (632) PCIE LTR max no snoop Latency 4
+ PNL5, 16, // (634) PCIE LTR max no snoop Latency 5
+ PNL6, 16, // (636) PCIE LTR max no snoop Latency 6
+ TRTV, 8, // (638) TrtRevision
+ WWPS, 32, // (639) WWAN PSV
+ PWRE, 8, // (643) EnablePowerParticipant
+ PBPE, 8, // (644) EnablePowerBossPolicy
+ HGEN, 8, // (645) HG Enabled (0=Disabled, 1=Enabled)
+ XBAS, 32, // (646) Any Device's PCIe Config Space Base Address
+ DLPW, 16, // (650) Delay after Power Enable
+ DLHR, 16, // (652) Delay after Hold Reset
+ HRCO, 32, // (654) dGPU HLD RST GPIO Community Offset
+ HRPO, 16, // (658) dGPU HLD RST GPIO Pin Offset
+ HRAI, 8, // (660) dGPU HLD RST GPIO Active Information
+ PECO, 32, // (661) dGPU PWR Enable GPIO Community Offset
+ PEPO, 16, // (665) dGPU PWR Enable GPIO Pin Offset
+ PEAI, 8, // (667) dGPU PWR Enable GPIO Active Information
+ SCBN, 8, // (668) PCIe Endpoint Bus Number
+ EECP, 8, // (669) PCIe Endpoint PCIe Capability Structure Offset
+ RPBA, 32, // (670) dGPU Root Port Base Address
+ NVGA, 32, // (674) NVIG opregion address
+ NVHA, 32, // (678) NVHM opregion address
+ AMDA, 32, // (682) AMDA opregion address
+ GN1E, 8, // (686) EnableGen1Participant
+ GN2E, 8, // (687) EnableGen2Participant
+ GN3E, 8, // (688) EnableGen3Participant
+ GN4E, 8, // (689) EnableGen4Participant
+ G1AT, 8, // (690) ActiveThermalTripPointGen1
+ G1PT, 8, // (691) PassiveThermalTripPointGen1
+ G1CT, 8, // (692) CriticalThermalTripPointGen1
+ G1HT, 8, // (693) HotThermalTripPointGen1
+ G1C3, 8, // (694) CriticalThermalTripPointGen1S3
+ TSP1, 8, // (695) ThermistorSamplingPeriodGen1
+ G2AT, 8, // (696) ActiveThermalTripPointGen2
+ G2PT, 8, // (697) PassiveThermalTripPointGen2
+ G2CT, 8, // (698) CriticalThermalTripPointGen2
+ G2HT, 8, // (699) HotThermalTripPointGen2
+ G2C3, 8, // (700) CriticalThermalTripPointGen2S3
+ TSP2, 8, // (701) ThermistorSamplingPeriodGen2
+ G3AT, 8, // (702) ActiveThermalTripPointGen3
+ G3PT, 8, // (703) PassiveThermalTripPointGen3
+ G3CT, 8, // (704) CriticalThermalTripPointGen3
+ G3HT, 8, // (705) HotThermalTripPointGen3
+ G3C3, 8, // (706) CriticalThermalTripPointGen3S3
+ TSP3, 8, // (707) ThermistorSamplingPeriodGen3
+ G4AT, 8, // (708) ActiveThermalTripPointGen4
+ G4PT, 8, // (709) PassiveThermalTripPointGen4
+ G4CT, 8, // (710) CriticalThermalTripPointGen4
+ G4HT, 8, // (711) HotThermalTripPointGen4
+ G4C3, 8, // (712) CriticalThermalTripPointGen4S3
+ TSP4, 8, // (713) ThermistorSamplingPeriodGen4
+ DPC3, 32, // (714) DptfProcCriticalTemperatureS3
+ DPHT, 32, // (718) DptfProcHotThermalTripPoint
+ S1S3, 8, // (722) CriticalThermalTripPointSen1S3
+ S1HT, 8, // (723) HotThermalTripPointSen1
+ PCSP, 8, // (724) PMIC Stepping
+ IOBF, 8, // (725) ScHdAudioIoBufferOwnership
+ XDCE, 8, // (726) Xdci Enabled
+ RSVD, 16, // (727) Reserved[2]
+ VTKB, 8, // (729) Virtual keyboard Function 0- Disable 1- Discrete Touch 2- Integrated Touch
+ //
+ //WiGig for BXTM B0
+ //
+ WGEN, 8, // (730) WiGig Enable switch, for BXTM B0
+ WGPL, 16, // (731) WiGig SPLC Power Limit
+ WGTW, 32, // (733) WiGig SPLC Time Window
+
+ PSME, 8, // (737) WiGig Power sharing manager enabling
+ PSD0, 8, // (738) WiGig PSM SPLC0 Domain Type
+ PSP0, 16, // (739) WiGig PSM SPLC0 Power Limit
+ PST0, 32, // (741) WiGig PSM SPLC0 Time Window
+ PSD1, 8, // (745) WiGig PSM SPLC1 Domain Type
+ PSP1, 16, // (746) WiGig PSM SPLC1 Power Limit
+ PST1, 32, // (748) WiGig PSM SPLC1 Time Window
+
+ PDD0, 8, // (752) WiGig PSM DPLC0 Domain Type
+ PDP0, 8, // (753) WiGig PSM DPLC0 Domain Preference
+ PDI0, 8, // (754) WiGig PSM DPLC0 Power Limit Index
+ PDL0, 16, // (755) WiGig PSM DPLC0 Power Limit
+ PDT0, 32, // (757) WiGig PSM DPLC0 Time Window
+
+ PDD1, 8, // (761) WiGig PSM DPLC1 Domain Type
+ PDP1, 8, // (762) WiGig PSM DPLC1 Domain Preference
+ PDI1, 8, // (763) WiGig PSM DPLC1 Power Limit Index
+ PDL1, 16, // (764) WiGig PSM DPLC1 Power Limit
+ PDT1, 32, // (766) WiGig PSM DPLC1 Time Window
+ IS3A, 8, // (770) I2S audio codec device - INT343A
+ ISC1, 8, // (771) I2S audio codec device - INT34C1
+ NFCN, 8, // (772) I2C NFC device - NXP1001
+ PSSI, 8, // (773) I2S PSS device - IMPJ0003
+ , 8, // (774) (not used)
+ GSBC, 8, // (775) UART GPS device - BCM4752
+
+ AG1L, 64, // (776)
+ AG1H, 64, // (784)
+ AG2L, 64, // (792)
+ AG2H, 64, // (800)
+ AG3L, 64, // (808)
+ AG3H, 64, // (816)
+
+ PPPR, 16, // (824) PowerParticipantPollingRate
+ DCFE, 16, // (826) EnableDCFG (DPTF Configuration)
+
+ ODV0, 8, // (828) DPTF OemDesignVariable0
+ ODV1, 8, // (829) DPTF OemDesignVariable1
+ ODV2, 8, // (830) DPTF OemDesignVariable2
+ ODV3, 8, // (831) DPTF OemDesignVariable3
+ ODV4, 8, // (832) DPTF OemDesignVariable4
+ ODV5, 8, // (833) DPTF OemDesignVariable5
+
+ VSP1, 8, // (834) EnableVS1Participant
+ V1AT, 8, // (835) ActiveThermalTripPointVS1
+ V1PV, 8, // (836) PassiveThermalTripPointVS1
+ V1CR, 8, // (837) CriticalThermalTripPointVS1
+ V1C3, 8, // (838) CriticalThermalTripPointVS1S3
+ V1HT, 8, // (839) HotThermalTripPointVS1
+ VSP2, 8, // (840) EnableVS2Participant
+ V2AT, 8, // (841) ActiveThermalTripPointVS2
+ V2PV, 8, // (842) PassiveThermalTripPointVS2
+ V2CR, 8, // (843) CriticalThermalTripPointVS2
+ V2C3, 8, // (844) CriticalThermalTripPointVS2S3
+ V2HT, 8, // (845) HotThermalTripPointVS2
+ VSP3, 8, // (846) EnableVS3Participant
+ V3AT, 8, // (847) ActiveThermalTripPointVS3
+ V3PV, 8, // (848) PassiveThermalTripPointVS3
+ V3CR, 8, // (849) CriticalThermalTripPointVS3
+ V3C3, 8, // (850) CriticalThermalTripPointVS3S3
+ V3HT, 8, // (851) HotThermalTripPointVS3
+
+ VSPE, 8, // (852) EnableVsPolicy
+ SDS1, 8, // (853) SPI1 Fingerprint device - FPC1020/FPC1021
+ NFCS, 8, // (854) NFC device select: 0: disabled; 1: NFC (IPT)/secure NFC; 2: NFC;
+ , 16, // (855) reserved
+ , 32, // (857) reserved
+ PNSL, 8, // (861) Panel Selection (0=eDP, >=1 for MIPI)
+ EEPI, 8, // (862) EPIEnable
+ ETYC, 8, // (863) TypeCEnable
+ WWPT, 8, // (864) PassiveThermalTripPointWWAN
+ WWC3, 8, // (865) CriticalThermalTripPointWWANS3
+ WWHT, 8, // (866) HotThermalTripPointWWAN
+ WWCT, 8, // (867) CriticalThermalTripPointWWAN
+ DPHL, 8, // (868) DisplayHighLimit
+ DPLL, 8, // (869) DisplayLowLimit
+ ODBG, 8, // (871) OsDbgEnable
+ M32B, 32, // (874) PCIE MMIO resource base
+ M32L, 32, // (878) PCIE MMIO resource length
+ CROT, 8, // (883) Camera Sensor Rotation Angle
+ TCPL, 8, // (884) I2c Touch Panel
+ TCPD, 8, // (885) I2c Touch pad
+ IC0S, 32, // (886) I2C0 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+ IC1S, 32, // (890) I2C1 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+ IC2S, 32, // (894) I2C2 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+ IC3S, 32, // (898) I2C3 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+ IC4S, 32, // (902) I2C4 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+ IC5S, 32, // (906) I2C5 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+ IC6S, 32, // (910) I2C6 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+ IC7S, 32, // (914) I2C7 Speed - Standard mode/Fast mode/FastPlus mode/HighSpeed mode
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Gpe.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Gpe.asl new file mode 100644 index 0000000000..e0bc9326ae --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Gpe.asl @@ -0,0 +1,73 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+// General Purpose Events. This Scope handles the Run-time and
+// Wake-time SCIs. The specific method called will be determined by
+// the _Lxx value, where xx equals the bit location in the General
+// Purpose Event register(s).
+
+External(HGLS, MethodObj)
+External(HGAS, MethodObj)
+
+Scope(\_GPE)
+{
+ Method(_L0D, 0) {
+ Notify(\_SB.PCI0.XHC, 0x02)
+ }
+
+ Method(_L0E, 0) {
+ Notify(\_SB.PCI0.HDAS, 0x02)
+ }
+
+ // Dummy method for the Tier 1 GPIO SCI enable bit
+ Method(_L0F, 0) {}
+
+ Method(_L39){
+ // Required for ACPI 5.0 native Windows support
+ Notify(\_SB.PCI0.SATA.PRT0, 2) // Device Wake (Windows)
+ }
+
+ Method(_L08, 0) {
+ \_SB.PCI0.RP02.HPME()
+ Notify(\_SB.PCI0.RP02, 0x02)
+ }
+
+ Method(_L09, 0) {
+ If (LEqual(RP1D,0)) {
+ \_SB.PCI0.RP01.HPME()
+ Notify(\_SB.PCI0.RP01, 0x02)
+ }
+ If(LEqual(RP2D,0)) {
+ \_SB.PCI0.RP02.HPME()
+ Notify(\_SB.PCI0.RP02, 0x02)
+ }
+ If(LEqual(RP3D,0)) {
+ \_SB.PCI0.RP03.HPME()
+ Notify(\_SB.PCI0.RP03, 0x02)
+ }
+ If(LEqual(RP4D,0)) {
+ \_SB.PCI0.RP04.HPME()
+ Notify(\_SB.PCI0.RP04, 0x02)
+ }
+ If(LEqual(RP5D,0)) {
+ \_SB.PCI0.RP05.HPME()
+ Notify(\_SB.PCI0.RP05, 0x02)
+ }
+ If(LEqual(RP6D,0)) {
+ \_SB.PCI0.RP06.HPME()
+ Notify(\_SB.PCI0.RP06, 0x02)
+ }
+ }
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/GpioLib.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/GpioLib.asl new file mode 100644 index 0000000000..c1166a4077 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/GpioLib.asl @@ -0,0 +1,163 @@ +/** @file
+ Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+include ("BxtPGpioDefine.asl")
+
+//
+// GPIO Access Library
+//
+Scope(\_SB)
+{
+ //
+ // Get Pad Configuration DW0 register value
+ //
+ Method(GPC0, 0x1, Serialized)
+ {
+ //
+ // Arg0 - (GpioCommunityAddress + Gpio MMIO_Offset)
+ //
+
+ // Local0 = (GpioCommunityAddress + Gpio MMIO_Offset)
+ Store(Arg0, Local0)
+ OperationRegion(PDW0, SystemMemory, Or (P2BA, Local0), 4)
+ Field(PDW0, AnyAcc, NoLock, Preserve) {
+ Offset(0x0),
+ TEMP,32
+ }
+ Return(TEMP)
+ }
+
+ //
+ // Set Pad Configuration DW0 register value
+ //
+ Method(SPC0, 0x2, Serialized)
+ {
+ //
+ // Arg0 - (GpioCommunityAddress + Gpio MMIO_Offset)
+ // Arg1 - Value for DW0 register
+ //
+
+ // Local0 = (GpioCommunityAddress + Gpio MMIO_Offset)
+ Store(Arg0, Local0)
+ OperationRegion(PDW0, SystemMemory, Or (P2BA, Local0), 4)
+ Field(PDW0, AnyAcc, NoLock, Preserve) {
+ Offset(0x0),
+ TEMP,32
+ }
+ Store(Arg1,TEMP)
+ }
+
+ //
+ // Get Pad Configuration DW1 register value
+ //
+ Method(GPC1, 0x1, Serialized)
+ {
+ //
+ // Arg0 -Local0 = (GpioCommunityAddress + Gpio MMIO_Offset) + 0x4
+ //
+
+ // Local0 = (GpioCommunityAddress + Gpio MMIO_Offset) + 0x4
+ Store( Add( Arg0, 0x4), Local0)
+ OperationRegion(PDW1, SystemMemory, Or (P2BA, Local0), 4)
+ Field(PDW1, AnyAcc, NoLock, Preserve) {
+ Offset(0x0),
+ TEMP,32
+ }
+ Return(TEMP)
+ }
+
+ //
+ // Set Pad Configuration DW1 register value
+ //
+ Method(SPC1, 0x2, Serialized)
+ {
+ //
+ // Arg0 - (GpioCommunityAddress + Gpio MMIO_Offset) + 0x4
+ // Arg1 - Value for DW1 register
+ //
+
+ // Local0 = (GpioCommunityAddress + Gpio MMIO_Offset) + 0x4
+ Store( Add( Arg0, 0x4), Local0)
+ OperationRegion(PDW1, SystemMemory, Or (P2BA, Local0), 4)
+ Field(PDW1, AnyAcc, NoLock, Preserve) {
+ Offset(0x0),
+ TEMP,32
+ }
+ Store(Arg1,TEMP)
+ }
+
+ //
+ // Get GPI Input Value
+ //
+ Method(GGIV, 0x1, Serialized)
+ {
+ //
+ // Arg0 - (GpioCommunityAddress + Gpio MMIO_Offset)
+ //
+
+ // Local0 = (GpioCommunityAddress + Gpio MMIO_Offset)
+ Store( Arg0, Local0)
+ OperationRegion(PDW0, SystemMemory, Or (P2BA, Local0), 4)
+ Field(PDW0, AnyAcc, NoLock, Preserve) {
+ Offset(0x0),
+ , 1,
+ TEMP,1,
+ , 30
+ }
+ Return(TEMP)
+ }
+
+ //
+ // Get GPO Output Value
+ //
+ Method(GGOV, 0x1, Serialized)
+ {
+ //
+ // Arg0 - (GpioCommunityAddress + Gpio MMIO_Offset)
+ //
+
+ // Local0 = (GpioCommunityAddress + Gpio MMIO_Offset)
+ Store( Arg0, Local0)
+ OperationRegion(PDW0, SystemMemory, Or (P2BA, Local0), 4)
+ Field(PDW0, AnyAcc, NoLock, Preserve) {
+ Offset(0x0),
+ TEMP,1,
+ , 31
+ }
+ Return(TEMP)
+ }
+
+ //
+ // Set GPO Output Value
+ //
+ Method(SGOV, 0x2, Serialized)
+ {
+ //
+ // Arg0 - (GpioCommunityAddress + Gpio MMIO_Offset)
+ // Arg1 - Value of GPIO Tx State
+ //
+
+ // Local0 = (GpioCommunityAddress + Gpio MMIO_Offset)
+ Store( Arg0, Local0)
+ OperationRegion(PDW0, SystemMemory, Or (P2BA, Local0), 4)
+ Field(PDW0, AnyAcc, NoLock, Preserve) {
+ Offset(0x0),
+ TEMP,1,
+ , 31
+ }
+ Store(Arg1,TEMP)
+ }
+
+} // \_SB Scope
+
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/HOST_BUS.ASL b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/HOST_BUS.ASL new file mode 100644 index 0000000000..059259d141 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/HOST_BUS.ASL @@ -0,0 +1,334 @@ +/** @file
+ This file contains the Broxton PCI configuration space definition.
+ It defines various Broxton PCI Configuration Space registers
+ which will be used to dynamically produce all resources in the Host Bus.
+ @note This ASL file needs to be included as part of platform ACPI DSDT table.
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Device(VLVC)
+{
+ Name(_ADR, 0x00000000) // Device 0, Function 0
+
+ // Define various MCH Controller PCI Configuration Space
+ // registers which will be used to dynamically produce all
+ // resources in the Host Bus _CRS.
+
+ OperationRegion(HBUS, PCI_Config, 0x00, 0xFF)
+ Field(HBUS, DWordAcc, NoLock, Preserve)
+ {
+ Offset(0x48), // MCHBAR (0:0:0:48)
+ MHEN, 1, // Enable
+ , 14,
+ MHBR, 24, // MCHBAR [38:15]
+ Offset(0xB0),
+ BDSM, 32, // Base of Data Stolen Memory
+ BGSM, 32, // Base of Graphics Stolen Memory
+ Offset(0xBC),
+ TOLD, 32, // Top of Low Useable DRAM
+ }
+}
+
+//
+// BUS, I/O, and MMIO resources
+//
+Method(_CRS,0,Serialized) {
+ //
+ // Create pointers to PCI MMIO values
+ //
+ CreateDwordField(RES0, ^PM01._MIN, M1MN)
+ CreateDwordField(RES0, ^PM01._MAX, M1MX)
+ CreateDwordField(RES0, ^PM01._LEN, M1LN)
+
+ //
+ // Set Memory Size Values. TLUD represents bits 31:20 of phyical
+ // TOM, so shift these bits into the correct position and fix up
+ // the Memory Region available to PCI.
+ //
+ Store (M32L, M1LN)
+ Store (M32B, M1MN)
+ Subtract (Add (M1MN, M1LN), 1, M1MX)
+
+ //
+ // Create pointers to Base of Data Stolen Memory Values
+ //
+ CreateDwordField(RES0, ^DSM1._MIN, GSMN)
+ CreateDwordField(RES0, ^DSM1._MAX, GSMX)
+ CreateDwordField(RES0, ^DSM1._LEN, GSLN)
+
+ // Read C-Unit PCI CFG Reg. 0xB0 for BDSM
+ Store(^VLVC.BDSM, GSMN)
+
+ // Read C-Unit PCI CFG Reg. 0xBC for TOLUD
+ And(^VLVC.TOLD, 0xFFFFF000, GSMX)
+ Decrement(GSMX)
+
+ Add(Subtract(GSMX, GSMN), 1, GSLN)
+
+ //
+ // Create pointers to Base of Graphics Stolen Memory Values
+ //
+ CreateDwordField(RES0, ^GSM1._MIN, GDMN)
+ CreateDwordField(RES0, ^GSM1._MAX, GDMX)
+ CreateDwordField(RES0, ^GSM1._LEN, GDLN)
+
+ // Read C-Unit PCI CFG Reg. 0xB4 for BGSM
+ Store(^VLVC.BGSM, GDMN)
+
+ // Read C-Unit PCI CFG Reg. 0xBC for TOLUD
+ And(^VLVC.BDSM, 0xFFFFF000, GDMX)
+ Decrement(GDMX)
+
+ Add(Subtract(GDMX, GDMN), 1, GDLN)
+
+ Return(RES0)
+}
+
+Name( RES0,ResourceTemplate() {
+ WORDBusNumber ( // Bus number resource (0); the bridge produces bus numbers for its subsequent buses
+ ResourceProducer, // bit 0 of general flags is 1
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ PosDecode, // PosDecode
+ 0x0000, // Granularity
+ 0x0000, // Min
+ 0x00FF, // Max
+ 0x0000, // Translation
+ 0x0100 // Range Length = Max-Min+1
+ )
+
+ IO (Decode16, 0x70, 0x77, 0x01, 0x08) //Consumed resource (0xCF8-0xCFF)
+ IO (Decode16, 0xCF8, 0xCF8, 0x01, 0x08) //Consumed resource (0xCF8-0xCFF)
+
+ WORDIO ( // Consumed-and-produced resource (all I/O below CF8)
+ ResourceProducer, // bit 0 of general flags is 0
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ PosDecode,
+ EntireRange,
+ 0x0000, // Granularity
+ 0x0000, // Min
+ 0x006F, // Max
+ 0x0000, // Translation
+ 0x0070 // Range Length
+ )
+
+ WORDIO ( // Consumed-and-produced resource
+ ResourceProducer, // bit 0 of general flags is 0
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ PosDecode,
+ EntireRange,
+ 0x0000, // Granularity
+ 0x0078, // Min
+ 0x0CF7, // Max
+ 0x0000, // Translation
+ 0x0C80 // Range Length
+ )
+
+ WORDIO ( // Consumed-and-produced resource (all I/O above CFF)
+ ResourceProducer, // bit 0 of general flags is 0
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ PosDecode,
+ EntireRange,
+ 0x0000, // Granularity
+ 0x0D00, // Min
+ 0xFFFF, // Max
+ 0x0000, // Translation
+ 0xF300 // Range Length
+ )
+
+ DWORDMEMORY ( // Descriptor for legacy VGA video RAM
+ ResourceProducer, // bit 0 of general flags is 0
+ PosDecode,
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ Cacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0x000A0000, // Min
+ 0x000BFFFF, // Max
+ 0x00000000, // Translation
+ 0x00020000 // Range Length
+ ,,,
+ LGB1
+ )
+
+ DWORDMEMORY ( // Descriptor for legacy OptionRom
+ ResourceProducer, // bit 0 of general flags is 0
+ PosDecode,
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ Cacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0x000C0000, // Min
+ 0x000DFFFF, // Max
+ 0x00000000, // Translation
+ 0x00020000 // Range Length
+ ,,,
+ LGB2
+ )
+
+ DWORDMEMORY ( // Descriptor for BIOS Area
+ ResourceProducer, // bit 0 of general flags is 0
+ PosDecode,
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ Cacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0x000E0000, // Min
+ 0x000FFFFF, // Max
+ 0x00000000, // Translation
+ 0x00020000 // Range Length
+ ,,,
+ LGB3
+ )
+
+ DWORDMEMORY ( // Descriptor for Base of Data Stolen Memory
+ ResourceProducer, // bit 0 of general flags is 0
+ PosDecode,
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ Cacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0x3be00000, // Min
+ 0x3FFFFFFF, // Max
+ 0x00000000, // Translation
+ 0x04200000 // Range Length
+ ,,,
+ DSM1
+ )
+
+ DWORDMEMORY ( // Descriptor for Base of Graphics Stolen Memory
+ ResourceProducer, // bit 0 of general flags is 0
+ PosDecode,
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ Cacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0x3be00000, // Min
+ 0x3FFFFFFF, // Max
+ 0x00000000, // Translation
+ 0x04200000 // Range Length
+ ,,,
+ GSM1
+ )
+
+ DWORDMEMORY ( // Descriptor for PCI MMIO
+ ResourceProducer, // bit 0 of general flags is 0
+ PosDecode,
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ NonCacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0x80000000, // Min
+ 0xBFFFFFFF, // Max
+ 0x00000000, // Translation
+ 0x40000000 // Range Length
+ ,,,
+ PM01
+ )
+
+ DWORDMEMORY ( // Descriptor for PCI CFG Space
+ ResourceProducer, // bit 0 of general flags is 0
+ PosDecode,
+ MinFixed, // Range is fixed
+ MaxFixed, // Range is fixed
+ NonCacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0xE0000000, // Min
+ 0xEFFFFFFF, // Max
+ 0x00000000, // Translation
+ 0x10000000 // Range Length
+ ,,,
+ PM02
+ )
+
+})
+
+Name(GUID,Buffer(){0x5b, 0x4d, 0xdb, 0x33,
+ 0xf7, 0x1f,
+ 0x1c, 0x40,
+ 0x96, 0x57,
+ 0x74, 0x41, 0xc0, 0x3d, 0xd7, 0x66})
+
+
+Name(SUPP,0) // PCI _OSC Support Field value
+Name(CTRL,0) // PCI _OSC Control Field value
+
+Method(_OSC,4,Serialized)
+{
+ //
+ // Check for proper UUID
+ // Save the capabilities buffer
+ //
+ Store(Arg3,Local0)
+
+ //
+ // Create DWord-adressable fields from the Capabilties Buffer
+ //
+ CreateDWordField(Local0,0,CDW1)
+ CreateDWordField(Local0,4,CDW2)
+ CreateDWordField(Local0,8,CDW3)
+
+ //
+ // Check for proper UUID
+ //
+ If (LAnd(LEqual(Arg0,GUID),NEXP)) {
+ // Save Capabilities DWord2 & 3
+ Store(CDW2,SUPP)
+ Store(CDW3,CTRL)
+
+ If (Not(And(CDW1,1))) {
+ // Query flag clear?
+ // Disable GPEs for features granted native control.
+ If (And(CTRL,0x01)) {
+ NHPG()
+ }
+ If (And(CTRL,0x04)) {
+ // PME control granted?
+ NPME()
+ }
+ }
+
+ If (LNotEqual(Arg1,One)) {
+ //
+ // Unknown revision
+ //
+ Or(CDW1,0x08,CDW1)
+ }
+
+ If (LNotEqual(CDW3,CTRL)) {
+ //
+ // Capabilities bits were masked
+ //
+ Or(CDW1,0x10,CDW1)
+ }
+ //
+ // Update DWORD3 in the buffer
+ //
+ Store(CTRL,CDW3)
+ Store(CTRL,OSCC)
+ Return(Local0)
+ } Else {
+ Or(CDW1,4,CDW1) // Unrecognized UUID
+ Return(Local0)
+ }
+} // End _OSC
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Hpet/Hpet.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Hpet/Hpet.aslc new file mode 100644 index 0000000000..312a4cadbb --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Hpet/Hpet.aslc @@ -0,0 +1,59 @@ +/** @file
+ The High Precision Event Timer Table
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// Statements that include other files
+//
+
+#include <Hpet.h>
+#include "AcpiTablePlatform.h"
+
+// Hpet Table
+EFI_ACPI_HIGH_PRECISION_EVENT_TIMER_TABLE_HEADER HPET = {
+ {
+ EFI_ACPI_3_0_HIGH_PRECISION_EVENT_TIMER_TABLE_SIGNATURE,
+ sizeof (EFI_ACPI_HIGH_PRECISION_EVENT_TIMER_TABLE_HEADER),
+ EFI_ACPI_HIGH_PRECISION_EVENT_TIMER_TABLE_REVISION,
+ 0, // to make sum of entire table == 0
+ EFI_ACPI_OEM_ID, // OEMID is a 6 bytes long field
+ EFI_ACPI_OEM_TABLE_ID, // OEM table identification(8 bytes long)
+ EFI_ACPI_OEM_REVISION, // OEM revision
+ EFI_ACPI_CREATOR_ID, // ASL compiler vendor ID
+ EFI_ACPI_CREATOR_REVISION // ASL compiler revision number
+ },
+ 0x0, // EventTimerBlockId
+ {
+ 0x00, // Address_Space_ID = System Memory
+ 0x40, // Register_Bit_Width = 32 bits, mentioned about write failures when in 64bit in SCU HAS
+ 0x00, // Register_Bit_offset
+ 0x00, // Dword access
+ HPET_BASE_ADDRESS, // Base addresse of HPET
+ },
+ 0x0, // Only HPET's _UID in Namespace
+ MAIN_COUNTER_MIN_PERIODIC_CLOCK_TICKS,
+ 0x0
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&HPET;
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/LPC_DEV.ASL b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/LPC_DEV.ASL new file mode 100644 index 0000000000..3d2cebe834 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/LPC_DEV.ASL @@ -0,0 +1,115 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+scope (\_SB) {
+
+ Device(RTC) // RTC
+ {
+ Name(_HID,EISAID("PNP0B00"))
+
+ Name(_CRS,ResourceTemplate()
+ {
+ IO(Decode16,0x70,0x70,0x01,0x08)
+ })
+ }
+
+ Device(HPET) // High Performance Event Timer
+ {
+ Name (_HID, EisaId ("PNP0103"))
+ Name (_UID, 0x00)
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite,
+ 0xFED00000, // Address Base
+ 0x00000400, // Address Length
+ )
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, , , )
+ {
+ 0x00000008, //0xB HPET-2
+ }
+ })
+ Return (RBUF)
+ }
+ }
+}
+
+Device(IPIC) // 8259 PIC
+{
+ Name(_HID,EISAID("PNP0000"))
+
+ Name(_CRS,ResourceTemplate()
+ {
+ IO(Decode16,0x20,0x20,0x01,0x02)
+ IO(Decode16,0x24,0x24,0x01,0x02)
+ IO(Decode16,0x28,0x28,0x01,0x02)
+ IO(Decode16,0x2C,0x2C,0x01,0x02)
+ IO(Decode16,0x30,0x30,0x01,0x02)
+ IO(Decode16,0x34,0x34,0x01,0x02)
+ IO(Decode16,0x38,0x38,0x01,0x02)
+ IO(Decode16,0x3C,0x3C,0x01,0x02)
+ IO(Decode16,0xA0,0xA0,0x01,0x02)
+ IO(Decode16,0xA4,0xA4,0x01,0x02)
+ IO(Decode16,0xA8,0xA8,0x01,0x02)
+ IO(Decode16,0xAC,0xAC,0x01,0x02)
+ IO(Decode16,0xB0,0xB0,0x01,0x02)
+ IO(Decode16,0xB4,0xB4,0x01,0x02)
+ IO(Decode16,0xB8,0xB8,0x01,0x02)
+ IO(Decode16,0xBC,0xBC,0x01,0x02)
+ IO(Decode16,0x4D0,0x4D0,0x01,0x02)
+ IRQNoFlags() {2}
+ })
+}
+
+Device(LDRC) // LPC Device Resource Consumption
+{
+ Name(_HID,EISAID("PNP0C02"))
+
+ Name(_UID,2)
+
+ Name(_CRS,ResourceTemplate()
+ {
+ IO(Decode16,0x2E,0x2E,0x1,0x02) // WPCN381U SIO Config Index + Data.
+ IO(Decode16,0x4E,0x4E,0x1,0x02) // LPC Slot Access.
+ IO(Decode16,0x61,0x61,0x1,0x1) // NMI Status.
+ IO(Decode16,0x63,0x63,0x1,0x1) // Processor I/F.
+ IO(Decode16,0x65,0x65,0x1,0x1) // Processor I/F.
+ IO(Decode16,0x67,0x67,0x1,0x1) // Processor I/F.
+ IO(Decode16,0x70,0x70,0x1,0x1) // NMI Enable.
+ IO(Decode16,0x80,0x80,0x1,0x10) // Postcode.
+ IO(Decode16,0x92,0x92,0x1,0x1) // Processor I/F.
+ IO(Decode16,0xB2,0xB2,0x01,0x02) // Software SMI.
+ IO(Decode16,0x680,0x680,0x1,0x20) // 32 Byte I/O.
+ IO(Decode16,0x400,0x400,0x1,0x80) // ACPI Base.
+ IO(Decode16,0x500,0x500,0x1,0xFF) // GPIO Base.
+ IO(Decode16,0x600,0x600,0x1,0x20) // WPCN381U SIO SWC + ACPI Base.
+ IO(Decode16,0x164e,0x164e,0x1,0x02) // WPCN381U SIO Config Index1 + Data1.
+ })
+}
+Device(TIMR) // 8254 Timer
+{
+ Name(_HID,EISAID("PNP0100"))
+
+ Name(_CRS,ResourceTemplate()
+ {
+ IO(Decode16,0x40,0x40,0x01,0x04)
+ IO(Decode16,0x50,0x50,0x10,0x04)
+ IRQNoFlags() {0}
+ })
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/LpcB.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/LpcB.asl new file mode 100644 index 0000000000..c39dba7d78 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/LpcB.asl @@ -0,0 +1,49 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+// LPC Bridge - Device 31, Function 0
+// Define the needed LPC registers used by ASL.
+
+scope(\_SB) {
+ OperationRegion(ILBR, SystemMemory, \IBAS, 0x8C)
+ Field(ILBR, AnyAcc, NoLock, Preserve) {
+ Offset(0x08), // 0x08
+ PARC, 8,
+ PBRC, 8,
+ PCRC, 8,
+ PDRC, 8,
+ PERC, 8,
+ PFRC, 8,
+ PGRC, 8,
+ PHRC, 8,
+ Offset(0x88), // 0x88
+ , 4,
+ UI4E, 1
+ }
+
+ Include ("98_LINK.ASL")
+}
+// LPC Bridge - Device 31, Function 0
+scope (\_SB.PCI0.LPCB) {
+ OperationRegion(LPC0, PCI_Config, 0x40, 0xC0)
+ Field(LPC0, AnyAcc, NoLock, Preserve)
+ {
+ Offset(0x040), // 0x80
+ C1EN, 1, // COM1 Enable
+ , 31
+ }
+
+ Include ("LPC_DEV.ASL")
+
+} //end of SCOPE
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Lpit/Lpit.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Lpit/Lpit.aslc new file mode 100644 index 0000000000..c018f57caa --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Lpit/Lpit.aslc @@ -0,0 +1,191 @@ +/** @file
+ Low Power Idle Table
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// Include files
+//
+
+#include <PiDxe.h>
+#include <IndustryStandard/Acpi50.h>
+
+
+//
+// LPIT Definitions
+//
+
+#define EFI_ACPI_LOW_POWER_IDLE_TABLE_REVISION 0x1
+
+//
+// Ensure proper structure formats
+//
+#pragma pack(1)
+
+typedef union _EFI_ACPI_LPI_STATE_FLAGS {
+ struct {
+ UINT32 Disabled :1;
+ UINT32 CounterUnavailable :1;
+ UINT32 Reserved :30;
+ };
+ UINT32 AsUlong;
+} EFI_ACPI_LPI_STATE_FLAGS, *PEFI_ACPI_LPI_STATE_FLAGS;
+
+// Only Mwait LPI here:
+
+typedef struct _EFI_ACPI_MWAIT_LPI_STATE_DESCRIPTOR {
+ UINT32 Type; // offset: 0
+ UINT32 Length; // offset: 4
+ UINT16 UniqueId; // offset: 8
+ UINT8 Reserved[2]; // offset: 9
+ EFI_ACPI_LPI_STATE_FLAGS Flags; // offset: 12
+ EFI_ACPI_2_0_GENERIC_ADDRESS_STRUCTURE EntryTrigger; // offset: 16
+ UINT32 Residency; // offset: 28
+ UINT32 Latency; // offset: 32
+ EFI_ACPI_2_0_GENERIC_ADDRESS_STRUCTURE ResidencyCounter; // offset: 36
+ UINT64 ResidencyCounterFrequency; //offset: 48
+} EFI_ACPI_MWAIT_LPI_STATE_DESCRIPTOR;
+
+
+//
+// Defines for LPIT table, some are CHV specific
+//
+
+
+// signature "LPIT"
+#define EFI_ACPI_LOW_POWER_IDLE_TABLE_SIGNATURE 0x5449504c
+
+#define EFI_ACPI_OEM_LPIT_REVISION 0x00000000
+
+#define EFI_ACPI_LOW_POWER_IDLE_MWAIT_TYPE 0x0
+#define EFI_ACPI_LOW_POWER_IDLE_DEFAULT_FLAG 0x0
+#define EFI_ACPI_LOW_POWER_IDLE_RES_FREQ 0x0
+
+//
+// LPI state count (4 on BXT: S0ir, S0i1, S0i2, S0i3)
+//
+
+#define EFI_ACPI_BXT_LPI_STATE_COUNT 0x1
+
+//
+// LPI TRIGGER (HW C7 on CHV),
+// TOFIX!!!
+//
+#define EFI_ACPI_BXT_LPI_TRIGGER {0x7f, 1, 2, 0x0, 0x60}
+
+//
+// LPI residency counter (MSR based)
+//
+
+#define EFI_ACPI_BXT_LPI_RES_COUNTER0 {0x7F,64,0x0,0x0,0x632}
+#define EFI_ACPI_BXT_LPI_RES_COUNTER1 {0x7F,64,0x0,0x0,0x630}
+#define EFI_ACPI_BXT_LPI_RES_COUNTER2 {0x7F,64,0x0,0x0,0x631}
+#define EFI_ACPI_BXT_LPI_RES_COUNTER3 {0x7F,64,0x0,0x0,0x632}
+
+
+//
+// LPI break-even residency in us - all match S0i3 residency
+// Residency estimate: Latency x 3
+//
+#define EFI_ACPI_BXT_LPI_MIN_RES0 30000
+#define EFI_ACPI_BXT_LPI_MIN_RES1 15000
+#define EFI_ACPI_BXT_LPI_MIN_RES2 15000
+#define EFI_ACPI_BXT_LPI_MIN_RES3 15000
+
+//
+// LPI latency in us - all match S0i3 latency
+//
+#define EFI_ACPI_BXT_LPI_LATENCY0 3000
+#define EFI_ACPI_BXT_LPI_LATENCY1 5000
+#define EFI_ACPI_BXT_LPI_LATENCY2 5000
+#define EFI_ACPI_BXT_LPI_LATENCY3 5000
+
+//
+// LPI ID
+//
+#define EFI_ACPI_BXT_LPI_UNIQUE_ID0 0
+#define EFI_ACPI_BXT_LPI_UNIQUE_ID1 1
+#define EFI_ACPI_BXT_LPI_UNIQUE_ID2 2
+#define EFI_ACPI_BXT_LPI_UNIQUE_ID3 3
+
+//
+// LPI ACPI table header
+//
+
+
+typedef struct _EFI_ACPI_LOW_POWER_IDLE_TABLE {
+ EFI_ACPI_DESCRIPTION_HEADER Header;
+ EFI_ACPI_MWAIT_LPI_STATE_DESCRIPTOR LpiStates[EFI_ACPI_BXT_LPI_STATE_COUNT];
+} EFI_ACPI_LOW_POWER_IDLE_TABLE;
+
+#pragma pack()
+
+EFI_ACPI_LOW_POWER_IDLE_TABLE Lpit = {
+
+ //
+ // Header
+ //
+
+
+ EFI_ACPI_LOW_POWER_IDLE_TABLE_SIGNATURE,
+ sizeof (EFI_ACPI_LOW_POWER_IDLE_TABLE),
+ EFI_ACPI_LOW_POWER_IDLE_TABLE_REVISION ,
+
+ //
+ // Checksum will be updated at runtime
+ //
+ 0x00,
+
+ //
+ // It is expected that these values will be updated at runtime
+ //
+ ' ', ' ', ' ', ' ', ' ', ' ',
+
+ 0,
+ EFI_ACPI_OEM_LPIT_REVISION,
+ 0,
+ 0,
+
+
+
+ //
+ // Descriptor
+ //
+ {
+ {
+ EFI_ACPI_LOW_POWER_IDLE_MWAIT_TYPE,
+ sizeof(EFI_ACPI_MWAIT_LPI_STATE_DESCRIPTOR),
+ EFI_ACPI_BXT_LPI_UNIQUE_ID0,
+ {0,0},
+ {EFI_ACPI_LOW_POWER_IDLE_DEFAULT_FLAG}, //Flags
+ EFI_ACPI_BXT_LPI_TRIGGER, //EntryTrigger
+ EFI_ACPI_BXT_LPI_MIN_RES0, //Residency
+ EFI_ACPI_BXT_LPI_LATENCY0, //Latency
+ EFI_ACPI_BXT_LPI_RES_COUNTER0, //ResidencyCounter
+ EFI_ACPI_LOW_POWER_IDLE_RES_FREQ //Residency counter frequency
+ }
+ }
+};
+
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&Lpit;
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Lpit/Lpit.h b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Lpit/Lpit.h new file mode 100644 index 0000000000..bd5219caad --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Lpit/Lpit.h @@ -0,0 +1,121 @@ +/** @file
+ The header file of Low Power Idle Table.
+
+ Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _LPIT_H_
+#define _LPIT_H_
+
+//
+// Statements that include other files
+//
+
+#include <IndustryStandard/Acpi20.h>
+
+// signature "LPIT"
+#define ACPI_LOW_POWER_IDLE_TABLE_SIGNATURE 0x5449504c
+#define ACPI_OEM_LPIT_REVISION 0x00000000
+
+#define ACPI_LOW_POWER_IDLE_MWAIT_TYPE 0x0
+#define ACPI_LOW_POWER_IDLE_DEFAULT_FLAG 0x0
+#define ACPI_LOW_POWER_IDLE_NO_RES_COUNTER_FLAG 0x2
+#define ACPI_LOW_POWER_IDLE_RES_FREQ_TSC 0x0
+
+//
+// LPI state count
+//
+#define ACPI_LPI_STATE_COUNT 2
+
+//
+// LPI TRIGGER (HW C10)
+//
+#define ACPI_LPI_TRIGGER {0x7F,0x1,0x2,0x0,0x60}
+
+//
+// LPI residency counter (HW C10)
+//
+#define ACPI_LPI_RES_COUNTER {0x7F,64,0x0,0x0,0x632}
+
+//
+// LPI DUMMY COUNTER
+//
+#define ACPI_DUMMY_RES_COUNTER {0x0,0,0x0,0x0,0x0}
+
+
+//
+// LPI break-even residency in us (HW C10)
+//
+#define ACPI_LPI_MIN_RES 30000
+
+//
+// LPI latency in us (HW C10)
+//
+#define ACPI_LPI_LATENCY 3000
+
+//
+// LPI ID (HW C10 audio)
+//
+#define ACPI_LPI_AUDIO_ID 0
+
+//
+// LPI ID (HW C10 CS)
+//
+#define ACPI_LPI_CS_ID 1
+
+#define EFI_ACPI_LOW_POWER_IDLE_TABLE_REVISION 0x1
+
+//
+// Ensure proper structure formats
+//
+#pragma pack(1)
+
+typedef union _EFI_ACPI_LPI_STATE_FLAGS {
+ struct {
+ UINT32 Disabled :1;
+ UINT32 CounterUnavailable :1;
+ UINT32 Reserved :30;
+ };
+ UINT32 AsUlong;
+} EFI_ACPI_LPI_STATE_FLAGS, *PEFI_ACPI_LPI_STATE_FLAGS;
+
+// Only Mwait LPI here:
+
+typedef struct _EFI_ACPI_MWAIT_LPI_STATE_DESCRIPTOR {
+ UINT32 Type; // offset: 0
+ UINT32 Length; // offset: 4
+ UINT16 UniqueId; // offset: 8
+ UINT8 Reserved[2]; // offset: 10
+ EFI_ACPI_LPI_STATE_FLAGS Flags; // offset: 12
+ EFI_ACPI_2_0_GENERIC_ADDRESS_STRUCTURE EntryTrigger; // offset: 16
+ UINT32 Residency; // offset: 28
+ UINT32 Latency; // offset: 32
+ EFI_ACPI_2_0_GENERIC_ADDRESS_STRUCTURE ResidencyCounter; // offset: 36
+ UINT64 ResidencyCounterFrequency; //offset: 48
+} EFI_ACPI_MWAIT_LPI_STATE_DESCRIPTOR;
+
+#pragma pack()
+
+//
+// LPI ACPI table header
+//
+#pragma pack(1)
+
+typedef struct _ACPI_LOW_POWER_IDLE_TABLE {
+ EFI_ACPI_DESCRIPTION_HEADER Header;
+ EFI_ACPI_MWAIT_LPI_STATE_DESCRIPTOR LpiStates[ACPI_LPI_STATE_COUNT];
+} ACPI_LOW_POWER_IDLE_TABLE;
+
+#pragma pack()
+
+#endif //_LPIT_H_
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Madt/Madt.h b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Madt/Madt.h new file mode 100644 index 0000000000..b575e73a26 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Madt/Madt.h @@ -0,0 +1,188 @@ +/** @file
+ This file describes the contents of the ACPI Multiple APIC Description
+ Table (MADT). Some additional ACPI values are defined in Acpi1_0.h and
+ Acpi2_0.h.
+ To make changes to the MADT, it is necessary to update the count for the
+ APIC structure being updated, and to modify table found in Madt.c.
+
+ Copyright (c) 1996 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _MADT_H
+#define _MADT_H
+
+//
+// Statements that include other files
+//
+#include "AcpiTablePlatform.h"
+#include <IndustryStandard/Acpi10.h>
+#include <IndustryStandard/Acpi20.h>
+#include <IndustryStandard/Acpi30.h>
+#include "Platform.h"
+
+//
+// MADT Definitions
+//
+#define EFI_ACPI_OEM_MADT_REVISION 0x00000000
+//
+// Multiple APIC Flags are defined in AcpiX.0.h
+//
+#define EFI_ACPI_1_0_MULTIPLE_APIC_FLAGS (EFI_ACPI_1_0_PCAT_COMPAT)
+#define EFI_ACPI_2_0_MULTIPLE_APIC_FLAGS (EFI_ACPI_2_0_PCAT_COMPAT)
+#define EFI_ACPI_3_0_MULTIPLE_APIC_FLAGS (EFI_ACPI_3_0_PCAT_COMPAT)
+#define EFI_ACPI_4_0_MULTIPLE_APIC_FLAGS (EFI_ACPI_4_0_PCAT_COMPAT)
+
+//
+// Define the number of each table type.
+// This is where the table layout is modified.
+//
+#define EFI_ACPI_PROCESSOR_LOCAL_APIC_COUNT MAX_CPU_NUM
+#define EFI_ACPI_LOCAL_APIC_NMI_COUNT MAX_CPU_NUM
+#define EFI_ACPI_IO_APIC_COUNT 1
+#define EFI_ACPI_INTERRUPT_SOURCE_OVERRIDE_COUNT 2
+#define EFI_ACPI_NON_MASKABLE_INTERRUPT_SOURCE_COUNT 0
+#define EFI_ACPI_LOCAL_APIC_ADDRESS_OVERRIDE_COUNT 0
+#define EFI_ACPI_IO_SAPIC_COUNT 0
+#define EFI_ACPI_PROCESSOR_LOCAL_SAPIC_COUNT 0
+#define EFI_ACPI_PLATFORM_INTERRUPT_SOURCES_COUNT 0
+
+//
+// MADT structure
+//
+//
+// Ensure proper structure formats
+//
+#pragma pack(1)
+//
+// ACPI 1.0 Table structure
+//
+typedef struct {
+ EFI_ACPI_1_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER Header;
+
+#if EFI_ACPI_PROCESSOR_LOCAL_APIC_COUNT > 0
+ EFI_ACPI_1_0_PROCESSOR_LOCAL_APIC_STRUCTURE LocalApic[EFI_ACPI_PROCESSOR_LOCAL_APIC_COUNT];
+#endif
+
+#if EFI_ACPI_IO_APIC_COUNT > 0
+ EFI_ACPI_1_0_IO_APIC_STRUCTURE IoApic[EFI_ACPI_IO_APIC_COUNT];
+#endif
+
+#if EFI_ACPI_INTERRUPT_SOURCE_OVERRIDE_COUNT > 0
+ EFI_ACPI_1_0_INTERRUPT_SOURCE_OVERRIDE_STRUCTURE Iso[EFI_ACPI_INTERRUPT_SOURCE_OVERRIDE_COUNT];
+#endif
+
+#if EFI_ACPI_NON_MASKABLE_INTERRUPT_SOURCE_COUNT > 0
+ EFI_ACPI_1_0_NON_MASKABLE_INTERRUPT_SOURCE_STRUCTURE NmiSource[EFI_ACPI_NON_MASKABLE_INTERRUPT_SOURCE_COUNT];
+#endif
+
+#if EFI_ACPI_LOCAL_APIC_NMI_COUNT > 0
+ EFI_ACPI_1_0_LOCAL_APIC_NMI_STRUCTURE LocalApicNmi[EFI_ACPI_LOCAL_APIC_NMI_COUNT];
+#endif
+
+#if EFI_ACPI_LOCAL_APIC_ADDRESS_OVERRIDE_COUNT > 0
+ EFI_ACPI_1_0_LOCAL_APIC_ADDRESS_OVERRIDE_STRUCTURE LocalApicOverride[EFI_ACPI_LOCAL_APIC_ADDRESS_OVERRIDE_COUNT];
+#endif
+
+} EFI_ACPI_1_0_MULTIPLE_APIC_DESCRIPTION_TABLE;
+
+//
+// ACPI 2.0 Table structure
+//
+typedef struct {
+ EFI_ACPI_2_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER Header;
+
+#if EFI_ACPI_PROCESSOR_LOCAL_APIC_COUNT > 0
+ EFI_ACPI_2_0_PROCESSOR_LOCAL_APIC_STRUCTURE LocalApic[EFI_ACPI_PROCESSOR_LOCAL_APIC_COUNT];
+#endif
+
+#if EFI_ACPI_IO_APIC_COUNT > 0
+ EFI_ACPI_2_0_IO_APIC_STRUCTURE IoApic[EFI_ACPI_IO_APIC_COUNT];
+#endif
+
+#if EFI_ACPI_INTERRUPT_SOURCE_OVERRIDE_COUNT > 0
+ EFI_ACPI_2_0_INTERRUPT_SOURCE_OVERRIDE_STRUCTURE Iso[EFI_ACPI_INTERRUPT_SOURCE_OVERRIDE_COUNT];
+#endif
+
+#if EFI_ACPI_NON_MASKABLE_INTERRUPT_SOURCE_COUNT > 0
+ EFI_ACPI_2_0_NON_MASKABLE_INTERRUPT_SOURCE_STRUCTURE NmiSource[EFI_ACPI_NON_MASKABLE_INTERRUPT_SOURCE_COUNT];
+#endif
+
+#if EFI_ACPI_LOCAL_APIC_NMI_COUNT > 0
+ EFI_ACPI_2_0_LOCAL_APIC_NMI_STRUCTURE LocalApicNmi[EFI_ACPI_LOCAL_APIC_NMI_COUNT];
+#endif
+
+#if EFI_ACPI_LOCAL_APIC_ADDRESS_OVERRIDE_COUNT > 0
+ EFI_ACPI_2_0_LOCAL_APIC_ADDRESS_OVERRIDE_STRUCTURE LocalApicOverride[EFI_ACPI_LOCAL_APIC_ADDRESS_OVERRIDE_COUNT];
+#endif
+
+#if EFI_ACPI_IO_SAPIC_COUNT > 0
+ EFI_ACPI_2_0_IO_SAPIC_STRUCTURE IoSapic[EFI_ACPI_IO_SAPIC_COUNT];
+#endif
+
+#if EFI_ACPI_PROCESSOR_LOCAL_SAPIC_COUNT > 0
+ EFI_ACPI_2_0_PROCESSOR_LOCAL_SAPIC_STRUCTURE LocalSapic[EFI_ACPI_PROCESSOR_LOCAL_SAPIC_COUNT];
+#endif
+
+#if EFI_ACPI_PLATFORM_INTERRUPT_SOURCES_COUNT > 0
+ EFI_ACPI_2_0_PLATFORM_INTERRUPT_SOURCES_STRUCTURE PlatformInterruptSources[EFI_ACPI_PLATFORM_INTERRUPT_SOURCES_COUNT];
+#endif
+
+} EFI_ACPI_2_0_MULTIPLE_APIC_DESCRIPTION_TABLE;
+
+//
+// ACPI 3.0 Table structure
+//
+typedef struct {
+ EFI_ACPI_3_0_MULTIPLE_APIC_DESCRIPTION_TABLE_HEADER Header;
+
+#if EFI_ACPI_PROCESSOR_LOCAL_APIC_COUNT > 0 // Type 0x00
+ EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC_STRUCTURE LocalApic[EFI_ACPI_PROCESSOR_LOCAL_APIC_COUNT];
+#endif
+
+#if EFI_ACPI_IO_APIC_COUNT > 0 // Type 0x01
+ EFI_ACPI_3_0_IO_APIC_STRUCTURE IoApic[EFI_ACPI_IO_APIC_COUNT];
+#endif
+
+#if EFI_ACPI_INTERRUPT_SOURCE_OVERRIDE_COUNT > 0 // Type 0x02
+ EFI_ACPI_3_0_INTERRUPT_SOURCE_OVERRIDE_STRUCTURE Iso[EFI_ACPI_INTERRUPT_SOURCE_OVERRIDE_COUNT];
+#endif
+
+#if EFI_ACPI_NON_MASKABLE_INTERRUPT_SOURCE_COUNT > 0 // Type 0x03
+ EFI_ACPI_3_0_NON_MASKABLE_INTERRUPT_SOURCE_STRUCTURE NmiSource[EFI_ACPI_NON_MASKABLE_INTERRUPT_SOURCE_COUNT];
+#endif
+
+#if EFI_ACPI_LOCAL_APIC_NMI_COUNT > 0 // Type 0x04
+ EFI_ACPI_3_0_LOCAL_APIC_NMI_STRUCTURE LocalApicNmi[EFI_ACPI_LOCAL_APIC_NMI_COUNT];
+#endif
+
+#if EFI_ACPI_LOCAL_APIC_ADDRESS_OVERRIDE_COUNT > 0 // Type 0x05
+ EFI_ACPI_3_0_LOCAL_APIC_ADDRESS_OVERRIDE_STRUCTURE LocalApicOverride[EFI_ACPI_LOCAL_APIC_ADDRESS_OVERRIDE_COUNT];
+#endif
+
+#if EFI_ACPI_IO_SAPIC_COUNT > 0 // Type 0x06
+ EFI_ACPI_3_0_IO_SAPIC_STRUCTURE IoSapic[EFI_ACPI_IO_SAPIC_COUNT];
+#endif
+
+#if EFI_ACPI_PROCESSOR_LOCAL_SAPIC_COUNT > 0 // Type 0x07 : This table changes in madt 2.0
+ EFI_ACPI_3_0_PROCESSOR_LOCAL_SAPIC_STRUCTURE LocalSapic[EFI_ACPI_PROCESSOR_LOCAL_SAPIC_COUNT];
+#endif
+
+#if EFI_ACPI_PLATFORM_INTERRUPT_SOURCES_COUNT > 0 // Type 0x08
+ EFI_ACPI_3_0_PLATFORM_INTERRUPT_SOURCES_STRUCTURE PlatformInterruptSources[EFI_ACPI_PLATFORM_INTERRUPT_SOURCES_COUNT];
+#endif
+
+} EFI_ACPI_3_0_MULTIPLE_APIC_DESCRIPTION_TABLE;
+
+#pragma pack()
+
+#endif
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Madt/Madt30.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Madt/Madt30.aslc new file mode 100644 index 0000000000..6c595dbf1b --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Madt/Madt30.aslc @@ -0,0 +1,209 @@ +/** @file
+ Multiple APIC Description Table
+
+ Copyright (c) 1996 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// Statements that include other files
+//
+#include "Madt.h"
+#include <IndustryStandard/Acpi50.h>
+
+//
+// Multiple APIC Description Table
+//
+EFI_ACPI_3_0_MULTIPLE_APIC_DESCRIPTION_TABLE Madt = {
+ EFI_ACPI_3_0_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE, // **Signatures are the same 1.0-3.0 because it says "APIC".
+ sizeof (EFI_ACPI_3_0_MULTIPLE_APIC_DESCRIPTION_TABLE), // **Length
+ EFI_ACPI_5_0_MULTIPLE_APIC_DESCRIPTION_TABLE_REVISION,
+ //
+ // EFI_ACPI_3_0_MULTIPLE_APIC_DESCRIPTION_TABLE_REVISION, // **Table Revision must be 2.0 for ACPI 3.0
+ // Checksum will be updated at runtime
+ //
+ 0x00, // **Check sum
+ //
+ // It is expected that these values will be programmed at runtime
+ //
+ ' ', // OEMID
+ ' ', // Creative way to
+ ' ', // make six bytes
+ ' ', // of space in
+ ' ', // a table for
+ ' ', // **OEMID
+ 0, // **OEM Table ID
+ EFI_ACPI_OEM_MADT_REVISION, // **OEM Revision
+ 0, // **Creator ID
+ 0, // **Creator Revision
+ //
+ // MADT specific fields
+ //
+ LOCAL_APIC_BASE_ADDRESS, // **Local APIC Address
+ EFI_ACPI_4_0_MULTIPLE_APIC_FLAGS, // **Flags
+ //
+ // Processor Local APIC Structure
+ // Correct processor order, Primary threads first then Hyper threads
+ // And correct APIC-ids
+ // This text below is included as a reference until Thurley is 100%:
+ // According to EDS the Local APIC ID is determined based of a bit structure
+ // Bit 24: Core ID Bit 25: Core Pair ID Bit 26-27: Reserved Bit 28-30: Socket ID Bit 31: Reserved
+ // 4 Sockets and 4 Cores per Socket.
+ // So possible LAPIC IDs 00, 01, 02, 03, 10, 11, 12, 13, 20, 21, 22, 23, 30, 31, 32, 33
+ // Static Entries 00, 10, 20, 30, 01, 11, 21, 31, 02, 12, 22, 32, 03, 13, 23, 33
+ // BSP needs to be first entry in table. Check before boot. If BSP non zero need to rotate the entries.
+ // Suppore BSP is LAPIC ID xy. Rotate the table by using formula [x + (y * 4)]
+ // So if BSP LAPIC ID is 21 then table rotated 6 times.
+ // End of Reference Text.
+ // Thurley is supposed to be 2 sockets, 4 cores, and hyperthreading available per each core.
+ // 2 (sockets) x 4 (cores) = 8 (processors non-HT), 8 (processors non-HT) x 2 (HT/proc) = 16 (HT procs)
+ // Rhyme & reason of the ordering below. This is a best guess ordering for now,
+ // Thurley EPS may give better info on LAPIC numbers.
+ // Ordering was established to help dissipate heat across two sockets evenly.
+ // Since logical processor number only has to be unique, I followed
+ // a similar approach to high end servers and have the first digit of the LAPIC
+ // id the socket number.
+ //
+ EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC, // Type 0x00
+ sizeof (EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC_STRUCTURE), // Length
+ 0x01, // Processor ID
+ 0x00, // Local APIC ID
+ 0x00000001, // Flags - Disabled (until initialized by platform driver)
+ EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC, // Type
+ sizeof (EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC_STRUCTURE), // Length
+ 0x02, // Processor ID
+ 0x02, // Local APIC ID
+ 0x00000001, // Flags - Disabled (until initialized by platform driver)
+ EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC, // Type
+ sizeof (EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC_STRUCTURE), // Length
+ 0x03, // Processor ID
+ 0x04, // Local APIC ID
+ 0x00000001, // Flags - Disabled (until initialized by platform driver)
+ EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC, // Type
+ sizeof (EFI_ACPI_3_0_PROCESSOR_LOCAL_APIC_STRUCTURE), // Length
+ 0x04, // Processor ID
+ 0x06, // Local APIC ID
+ 0x00000001, // Flags - Disabled (until initialized by platform driver)
+ //
+ // *************** IO APIC Structure ******************
+ //
+ //
+ //
+ // ************************** I/O APIC (ICH) **************
+ //
+ EFI_ACPI_3_0_IO_APIC, // Type 0x01
+ sizeof (EFI_ACPI_3_0_IO_APIC_STRUCTURE), // Length
+ ICH_IOAPIC_ID, // IO APIC ID
+ EFI_ACPI_RESERVED_BYTE, // Reserved EFI_ACPI_RESERVED_BYTE
+ IO_APIC_BASE_ADDRESS, // IO APIC Address (physical) 0xFEC00000
+ 0x18 * 0, // Global System Interrupt Base
+
+ //
+ // Interrupt Source Override Structure: Sample
+ //
+ // EFI_ACPI_2_0_INTERRUPT_SOURCE_OVERRIDE, // Type 0x02
+ // sizeof (EFI_ACPI_2_0_INTERRUPT_SOURCE_OVERRIDE_STRUCTURE),// Length
+ // 0x00, // Bus
+ // 0x00, // Source
+ // 0x00000000, // Global System Interrupt
+ // 0x0000, // Flags
+ //
+ // IRQ0=>IRQ2 Interrupt Source Override Structure
+ //
+ EFI_ACPI_3_0_INTERRUPT_SOURCE_OVERRIDE, // Type 0x02
+ sizeof (EFI_ACPI_3_0_INTERRUPT_SOURCE_OVERRIDE_STRUCTURE), // Length
+ 0x00, // Bus - ISA
+ 0x00, // Source - IRQ0
+ 0x00000002, // Global System Interrupt - IRQ2
+ 0x0000, // Flags - Conforms to specifications of the bus
+ //
+ // ISO (SCI Active High) Interrupt Source Override Structure
+ //
+ EFI_ACPI_3_0_INTERRUPT_SOURCE_OVERRIDE, // Type 0x02
+ sizeof (EFI_ACPI_3_0_INTERRUPT_SOURCE_OVERRIDE_STRUCTURE), // Length
+ 0x00, // Bus - ISA
+ 0x09, // Source - IRQ0
+ 0x00000009, // Global System Interrupt - IRQ2
+ 0x000F, // Flags - Level-tiggered, Active Low
+
+ //
+ // Non-Maskable Interrupt (NMIs) Source Structure: Sample
+ //
+ // EFI_ACPI_2_0_NON_MASKABLE_INTERRUPT_SOURCE, // Type 0x03
+ // sizeof (EFI_ACPI_2_0_NON_MASKABLE_INTERRUPT_SOURCE_STRUCTURE), // Length
+ // 0x0000, // Flags
+ // 0x00000000, // Global System Interrupt
+ //
+ // Local APIC NMI Structure: Sample
+ //
+ // EFI_ACPI_2_0_LOCAL_APIC_NMI, // Type 0x04
+ // sizeof (EFI_ACPI_2_0_LOCAL_APIC_NMI_STRUCTURE), // Length
+ // 0x00, // ACPI Processor ID
+ // 0x0000, // Flags
+ // 0x00, // Local APIC LINT#
+ // >>> CORE_m008 Add Local APIC NMI tables for 2nd, 3rd and 4th physical processors.
+ //
+ // Assuming here that only need to entries for two sockets.
+ //
+ EFI_ACPI_3_0_LOCAL_APIC_NMI, // Type
+ sizeof (EFI_ACPI_3_0_LOCAL_APIC_NMI_STRUCTURE), // Length
+ 0x01, // ACPI Processor ID
+ 0x000D, // Flags - Level-tiggered, Active High
+ 0x01, // Local APIC LINT#
+ EFI_ACPI_3_0_LOCAL_APIC_NMI, // Type
+ sizeof (EFI_ACPI_3_0_LOCAL_APIC_NMI_STRUCTURE), // Length
+ 0x02, // ACPI Processor ID
+ 0x000D, // Flags - Level-tiggered, Active High
+ 0x01, // Local APIC LINT#
+ EFI_ACPI_3_0_LOCAL_APIC_NMI, // Type
+ sizeof (EFI_ACPI_3_0_LOCAL_APIC_NMI_STRUCTURE), // Length
+ 0x03, // ACPI Processor ID
+ 0x000D, // Flags - Level-tiggered, Active High
+ 0x01, // Local APIC LINT#
+ EFI_ACPI_3_0_LOCAL_APIC_NMI, // Type
+ sizeof (EFI_ACPI_3_0_LOCAL_APIC_NMI_STRUCTURE), // Length
+ 0x04, // ACPI Processor ID
+ 0x000D, // Flags - Level-tiggered, Active High
+ 0x01, // Local APIC LINT#
+
+ //
+ // Local APIC Address Override Structure: Sample
+ //
+ // EFI_ACPI_2_0_LOCAL_APIC_ADDRESS_OVERRIDE, // Type 0x5
+ // sizeof (EFI_ACPI_2_0_LOCAL_APIC_ADDRESS_OVERRIDE_STRUCTURE), // Length
+ // EFI_ACPI_RESERVED_WORD, // Reserved
+ // 0x0000000000000000, // Local APIC Address
+ //
+ // Sample Platform Interrupt Sources Structure
+ //
+ // EFI_ACPI_2_0_PLATFORM_INTERRUPT_SOURCES, // Type 0x8
+ // sizeof (EFI_ACPI_2_0_PLATFORM_INTERRUPT_SOURCES_STRUCTURE), // Length
+ // 0x0000, // Flags
+ // 0x00, // Interrupt Type
+ // 0x00, // Processor ID
+ // 0x00, // Processor EID
+ // 0x00, // IO SAPIC Vector
+ // 0x00000000, // Global System Interrupt
+ // EFI_ACPI_RESERVED_DWORD, // Reserved
+ //
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&Madt;
+}
\ No newline at end of file diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Mcfg/Mcfg.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Mcfg/Mcfg.aslc new file mode 100644 index 0000000000..e3120e83f3 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Mcfg/Mcfg.aslc @@ -0,0 +1,78 @@ +/** @file
+ ACPI Memory mapped configuration space base address Description Table
+
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// Statements that include other files
+//
+#include <Mcfg.h>
+
+//
+// MCFG Table definition
+//
+EFI_ACPI_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE MCFG = {
+ EFI_ACPI_3_0_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE_SIGNATURE,
+ sizeof (EFI_ACPI_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE),
+ EFI_ACPI_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE_REVISION,
+ //
+ // Checksum will be updated at runtime
+ //
+ 0x00,
+ //
+ // It is expected that these values will be programmed at runtime
+ //
+ ' ',
+ ' ',
+ ' ',
+ ' ',
+ ' ',
+ ' ',
+
+ 0,
+ EFI_ACPI_OEM_MCFG_REVISION,
+ 0,
+ 0,
+ //
+ // Beginning of MCFG specific fields
+ //
+ EFI_ACPI_RESERVED_QWORD,
+ //
+ // Sample Memory Mapped Configuration Space Base Address Structure
+ //
+ // 0x0, // Base Address
+ // 0x0, // PCI Segment Group Number
+ // 0x0, // Start Bus Number
+ // 0x0, // End Bus Number
+ // EFI_ACPI_RESERVED_DWORD, // Reserved
+ //
+ // Memory Mapped Configuration Space Base Address Structure for BNB
+ //
+ 0x0, // Base Address, will be updated by AcpiPlatform
+ 0x0, // PCI Segment Group Number
+ 0x0, // Start Bus Number
+ PLATFORM_MAX_BUS_NUM, // End Bus Number
+ EFI_ACPI_RESERVED_DWORD, // Reserved
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&MCFG;
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PCI_DRC.ASL b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PCI_DRC.ASL new file mode 100644 index 0000000000..f6b4e53368 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PCI_DRC.ASL @@ -0,0 +1,83 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope (\_SB.PCI0) {
+
+ Device(PDRC) // PCI Device Resource Consumption
+ {
+ Name(_HID,EISAID("PNP0C02"))
+
+ Name(_UID,1)
+
+ Name(BUF0,ResourceTemplate()
+ {
+ //
+ // PCI Express BAR _BAS and _LEN will be updated in _CRS below according to B0:D0:F0:Reg.60h
+ // Forced hard code at the moment.
+ //
+ //Memory32Fixed (ReadWrite, 0, 0, PCIX) // PCIEX BAR
+ Memory32Fixed (ReadWrite, 0x0E0000000, 0x010000000, PCIX)
+
+ //
+ // MPHY BAR. Check if the hard code meets the real configuration.
+ // If not, dynamically update it like the _CRS method below.
+ //
+ Memory32Fixed (ReadWrite, 0x0FEA00000, 0x0100000, MPHB) // MPHY BAR
+
+ //
+ // SPI BAR. Check if the hard code meets the real configuration.
+ // If not, dynamically update it like the _CRS method below.
+ //
+ Memory32Fixed (ReadWrite, 0x0FED01000, 0x01000,SPIB) // SPI BAR
+
+ //
+ // PMC BAR. Check if the hard code meets the real configuration.
+ // If not, dynamically update it like the _CRS method below.
+ //
+ Memory32Fixed (ReadWrite, 0x0FED03000, 0x01000,PMCB) // PMC BAR
+
+ //
+ // PUNIT BAR. Check if the hard code meets the real configuration.
+ // If not, dynamically update it like the _CRS method below.
+ //
+ Memory32Fixed (ReadWrite, 0x0FED06000, 0x01000, PUNB) // PUNIT BAR
+
+ //
+ // ILB BAR. Check if the hard code meets the real configuration.
+ // If not, dynamically update it like the _CRS method below.
+ //
+ Memory32Fixed (ReadWrite, 0x0FED08000, 0x02000, ILBB) // ILB BAR
+
+ //
+ // IO BAR. Check if the hard code meets the real configuration.
+ // If not, dynamically update it like the _CRS method below.
+ //
+ Memory32Fixed (ReadWrite, 0x0FED80000, 0x040000, IOBR) // IO BAR
+
+ //
+ // RCRB BAR _BAS will be updated in _CRS below according to B0:D31:F0:Reg.F0h
+ //
+ Memory32Fixed (ReadWrite, 0x0FED1C000, 0x01000, RCRB) // RCRB BAR
+
+ //
+ // Local APIC range(0xFEE0_0000 to 0xFEEF_FFFF)
+ //
+ Memory32Fixed (ReadOnly, 0x0FEE00000, 0x0100000, LIOH)
+ })
+
+ Method(_CRS,0,Serialized)
+ {
+ Return(BUF0)
+ }
+ }
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PciTree.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PciTree.asl new file mode 100644 index 0000000000..7f66fb2834 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PciTree.asl @@ -0,0 +1,199 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB) {
+ Name(PR00, Package(){
+// Host Bridge
+ Package(){0x0000FFFF, 2, LNKA, 0 }, // NPK
+ Package(){0x0002FFFF, 0, LNKD, 0 }, // Mobile IGFX
+ Package(){0x0003FFFF, 0, LNKF, 0 }, // IUNIT
+ Package(){0x000AFFFF, 0, LNKE, 0 }, // ISH
+ Package(){0x000BFFFF, 0, LNKF, 0 }, // PUNIT
+ Package(){0x000CFFFF, 0, LNKH, 0 }, // GMM
+
+ Package(){0x000EFFFF, 0, LNKA, 0 }, // D14: Low Power Audio Engine
+ Package(){0x000FFFFF, 0, LNKE, 0 }, // CSE
+ Package(){0x0012FFFF, 0, LNKD, 0 }, // D18: SATA Controller
+
+ Package(){0x0013FFFF, 0, LNKG, 0 }, // D19: PCI Express Port 3-6
+ Package(){0x0013FFFF, 1, LNKH, 0 }, // D19: PCI Express Port 3-6
+ Package(){0x0013FFFF, 2, LNKE, 0 }, // D19: PCI Express Port 3-6
+ Package(){0x0013FFFF, 3, LNKF, 0 }, // D19: PCI Express Port 3-6
+
+ Package(){0x0014FFFF, 0, LNKG, 0 }, // D20: PCI Express Port 1-2
+ Package(){0x0014FFFF, 1, LNKH, 0 }, // D20: PCI Express Port 1-2
+
+ Package(){0x0015FFFF, 0, LNKB, 0 }, // D21: xHCI Host, xDCI
+ Package(){0x0015FFFF, 1, LNKC, 0 },
+
+ Package(){0x001FFFFF, 0, LNKE, 0 }, // SMBus
+ })
+
+ Name(AR00, Package() {
+
+// Fields: Address,
+// PCI Pin,
+// Source (0 is global interrupt pool),
+// Source Index (IRQ if Source=0)
+
+ Package(){0x0000FFFF, 0, 0, 16 }, // NPK Device
+ Package(){0x0000FFFF, 1, 0, 24 }, // PUNIT Device (INTB -> 24)
+ Package(){0x0002FFFF, 0, 0, 19 }, // GEN (Intel GFX)
+ Package(){0x0003FFFF, 0, 0, 21 }, // IUNIT
+ Package(){0x000DFFFF, 1, 0, 40 }, // PMC
+ Package(){0x000EFFFF, 0, 0, 25 }, // HD-Audio
+ Package(){0x000FFFFF, 0, 0, 20 }, // CSE
+ Package(){0x0011FFFF, 0, 0, 26 }, // ISH
+ Package(){0x0012FFFF, 0, 0, 19 }, // SATA
+
+// D19: PCI Express Port 3-6
+ Package(){0x0013FFFF, 0, 0, 22 }, // PCIE0
+ Package(){0x0013FFFF, 1, 0, 23 }, // PCIE0
+ Package(){0x0013FFFF, 2, 0, 20 }, // PCIE0
+ Package(){0x0013FFFF, 3, 0, 21 }, // PCIE0
+
+// D20: PCI Express Port 1-2
+ Package(){0x0014FFFF, 0, 0, 22 }, // PCIE1
+ Package(){0x0014FFFF, 1, 0, 23 }, // PCIE1
+
+ Package(){0x0015FFFF, 0, 0, 17 }, // xHCI
+ Package(){0x0015FFFF, 1, 0, 13 }, // xDCI
+
+ Package(){0x0016FFFF, 0, 0, 27 }, // I2C0
+ Package(){0x0016FFFF, 1, 0, 28 }, // I2C1
+ Package(){0x0016FFFF, 2, 0, 29 }, // I2C2
+ Package(){0x0016FFFF, 3, 0, 30 }, // I2C3 // usage note: taking this line as an example, device 0x16, function 3 will use apic irq 30
+
+ Package(){0x0017FFFF, 0, 0, 31 }, // I2C4
+ Package(){0x0017FFFF, 1, 0, 32 }, // I2C5
+ Package(){0x0017FFFF, 2, 0, 33 }, // I2C6
+ Package(){0x0017FFFF, 3, 0, 34 }, // I2C7
+
+ Package(){0x0018FFFF, 0, 0, 4 }, // UART1
+ Package(){0x0018FFFF, 1, 0, 5 }, // UART2
+ Package(){0x0018FFFF, 2, 0, 6 }, // UART3
+ Package(){0x0018FFFF, 3, 0, 7 }, // UART4
+
+ Package(){0x0019FFFF, 0, 0, 35 }, // SPI1
+ Package(){0x0019FFFF, 1, 0, 36 }, // SPI2
+ Package(){0x0019FFFF, 2, 0, 37 }, // SPI3
+
+ Package(){0x001BFFFF, 0, 0, 3 }, // SDCard
+ Package(){0x001CFFFF, 0, 0, 39 }, // eMMC
+ Package(){0x001EFFFF, 0, 0, 42 }, // SDIO
+
+ Package(){0x001FFFFF, 0, 0, 20 } // SMBus
+ })
+
+ Name(PR04, Package(){
+// PCIE Port #1 Slot
+ Package(){0x0000FFFF, 0, LNKG, 0 },
+ Package(){0x0000FFFF, 1, LNKH, 0 },
+ Package(){0x0000FFFF, 2, LNKE, 0 },
+ Package(){0x0000FFFF, 3, LNKF, 0 },
+ })
+
+ Name(AR04, Package(){
+// PCIE Port #1 Slot
+ Package(){0x0000FFFF, 0, 0, 22 },
+ Package(){0x0000FFFF, 1, 0, 23 },
+ Package(){0x0000FFFF, 2, 0, 20 },
+ Package(){0x0000FFFF, 3, 0, 21 },
+ })
+
+ Name(PR05, Package(){
+// PCIE Port #2 Slot
+ Package(){0x0000FFFF, 0, LNKH, 0 },
+ Package(){0x0000FFFF, 1, LNKE, 0 },
+ Package(){0x0000FFFF, 2, LNKF, 0 },
+ Package(){0x0000FFFF, 3, LNKG, 0 },
+ })
+
+ Name(AR05, Package(){
+// PCIE Port #2 Slot
+ Package(){0x0000FFFF, 0, 0, 23 },
+ Package(){0x0000FFFF, 1, 0, 20 },
+ Package(){0x0000FFFF, 2, 0, 21 },
+ Package(){0x0000FFFF, 3, 0, 22 },
+ })
+
+ Name(PR06, Package(){
+// PCIE Port #3 Slot
+ Package(){0x0000FFFF, 0, LNKE, 0 },
+ Package(){0x0000FFFF, 1, LNKF, 0 },
+ Package(){0x0000FFFF, 2, LNKG, 0 },
+ Package(){0x0000FFFF, 3, LNKH, 0 },
+ })
+
+ Name(AR06, Package(){
+// PCIE Port #3 Slot
+ Package(){0x0000FFFF, 0, 0, 20 },
+ Package(){0x0000FFFF, 1, 0, 21 },
+ Package(){0x0000FFFF, 2, 0, 22 },
+ Package(){0x0000FFFF, 3, 0, 23 },
+ })
+
+ Name(PR07, Package(){
+// PCIE Port #4 Slot
+ Package(){0x0000FFFF, 0, LNKF, 0 },
+ Package(){0x0000FFFF, 1, LNKG, 0 },
+ Package(){0x0000FFFF, 2, LNKH, 0 },
+ Package(){0x0000FFFF, 3, LNKE, 0 },
+ })
+
+ Name(AR07, Package(){
+// PCIE Port #4 Slot
+ Package(){0x0000FFFF, 0, 0, 21 },
+ Package(){0x0000FFFF, 1, 0, 22 },
+ Package(){0x0000FFFF, 2, 0, 23 },
+ Package(){0x0000FFFF, 3, 0, 20 },
+ })
+
+//---------------------------------------------------------------------------
+// List of IRQ resource buffers compatible with _PRS return format.
+//---------------------------------------------------------------------------
+// Naming legend:
+// RSxy, PRSy - name of the IRQ resource buffer to be returned by _PRS, "xy" - last two characters of IRQ Link name.
+// Note. PRSy name is generated if IRQ Link name starts from "LNK".
+// HLxy , LLxy - reference names, can be used to access bit mask of available IRQs. HL and LL stand for active High(Low) Level triggered Irq model.
+//---------------------------------------------------------------------------
+ Name(PRSA, ResourceTemplate(){ // Link name: LNKA
+ IRQ(Level, ActiveLow, Shared, LLKA) {3,4,5,6,10,11,12,14,15}
+ })
+ Alias(PRSA,PRSB) // Link name: LNKB
+ Alias(PRSA,PRSC) // Link name: LNKC
+ Alias(PRSA,PRSD) // Link name: LNKD
+ Alias(PRSA,PRSE) // Link name: LNKE
+ Alias(PRSA,PRSF) // Link name: LNKF
+ Alias(PRSA,PRSG) // Link name: LNKG
+ Alias(PRSA,PRSH) // Link name: LNKH
+//---------------------------------------------------------------------------
+// Begin PCI tree object scope
+//---------------------------------------------------------------------------
+
+ Device(PCI0) { // PCI Bridge "Host Bridge"
+ Name(_HID, EISAID("PNP0A08")) // Indicates PCI Express/PCI-X Mode2 host hierarchy
+ Name(_CID, EISAID("PNP0A03")) // To support legacy OS that doesn't understand the new HID
+ Name(_ADR, 0x00000000)
+ Method(^BN00, 0) { return(0x0000) } // Returns default Bus number for Peer PCI buses. Name can be overriden with control method placed directly under Device scope
+ Method(_BBN, 0) { return(BN00()) } // Bus number, optional for the Root PCI Bus
+ Name(_UID, 0x0000) // Unique Bus ID, optional
+
+ Method(_PRT,0) {
+ If(PICM) {Return(AR00)} // APIC mode
+ Return (PR00) // PIC Mode
+ } // end _PRT
+ include ("HOST_BUS.ASL")
+ } // end PCI0 Bridge "Host Bridge"
+} // end _SB scope
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PcieRpPxsxWrapper.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PcieRpPxsxWrapper.asl new file mode 100644 index 0000000000..9675f966df --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PcieRpPxsxWrapper.asl @@ -0,0 +1,43 @@ +/** @file
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope (\_SB.PCI0.RP01.PXSX)
+{
+ Include("Wifi.asl")
+}
+
+Scope (\_SB.PCI0.RP02.PXSX)
+{
+ Include("Wifi.asl")
+}
+
+Scope (\_SB.PCI0.RP03.PXSX)
+{
+ Include("Wifi.asl")
+}
+
+Scope (\_SB.PCI0.RP04.PXSX)
+{
+ Include("Wifi.asl")
+}
+
+Scope (\_SB.PCI0.RP05.PXSX)
+{
+ Include("Wifi.asl")
+}
+
+Scope (\_SB.PCI0.RP06.PXSX)
+{
+ Include("Wifi.asl")
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Pep/Pep.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Pep/Pep.asl new file mode 100644 index 0000000000..5daf6e941e --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Pep/Pep.asl @@ -0,0 +1,255 @@ +/** @file
+ ACPI uPEP Support
+
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\_PR.NLPC, IntObj)
+
+//@todo MSFT has NOT implemented uPEP for Non-CS configuration on Win10. Need to uncomment once MSFT fully implements uPEP
+If (LOr(LEqual(S0ID, 1),LGreaterEqual(OSYS, 2015))) {
+ //Comment out the GFX0, since the _DEP is added in NorthCluster/AcpiTables/Sa.asl
+ Scope(\_SB.PCI0.SATA) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C0) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C1) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C2) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C3) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C4) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C5) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C6) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.I2C7) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.SPI1) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.SPI2) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.SPI3) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.URT1) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.URT2) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.URT4) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.XHC) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_PR.CPU0) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_PR.CPU1) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_PR.CPU2) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_PR.CPU3) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.SDIO) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.SDHA) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.SDC) { Name(_DEP, Package(){\_SB.PEPD}) }
+ Scope(\_SB.PCI0.RP02.PXSX) { Name(_DEP, Package(){\_SB.PEPD}) }
+}
+
+Scope(\_SB)
+{
+ Device (PEPD)
+ {
+ Name (_HID, "INT33A1")
+ Name (_CID, EISAID ("PNP0D80"))
+ Name (_UID, 0x1)
+
+ Name(PEPP, Zero)
+ Name (DEVS, Package()
+ {
+ 1,
+ Package() {"\\_SB.PCI0.GFX0"},
+ //Package() {"\\_SB.PCI0.SAT0.PRT1"}
+ })
+
+ Name(DEVY, Package() // uPEP Device List
+ {
+ //
+ // 1: ACPI Device Descriptor: Fully Qualified name-string
+ // 2: Enabled/Disabled Field
+ // 0 = This device is disabled and applies no constraints
+ // 1+ = This device is enabled and applies constraints
+ // 3: Constraint Package: entry per LPI state in LPIT
+ // a. Associated LPI State UID
+ // ID == 0xFF: same constraints apply to all states in LPIT
+ // b: minimum Dx state as pre-condition
+ // c: (optional) OEM specific OEM may provide an additional encoding
+ // which further defines the D-state Constraint
+ // 0x0-0x7F - Reserved
+ // 0x80-0xFF - OEM defined
+ //
+ Package() {"\\_PR.CPU0", 0x1, Package() {0, Package() {0xFF, 0}}},
+ Package() {"\\_PR.CPU1", 0x1, Package() {0, Package() {0xFF, 0}}},
+ Package() {"\\_PR.CPU2", 0x1, Package() {0, Package() {0xFF, 0}}},
+ Package() {"\\_PR.CPU3", 0x1, Package() {0, Package() {0xFF, 0}}},
+ Package() {"\\_SB.PCI0.GFX0", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.SATA", 0x1, Package() {0, Package() {0xFF, 0, 0x81}}},
+ Package() {"\\_SB.PCI0.URT1", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.URT2", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.URT3", 0x0, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.URT4", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.SPI1", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.SPI2", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.SPI3", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C0", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C1", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C2", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C3", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C4", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C5", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C6", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.I2C7", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.PWM", 0x0, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.SDIO", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.SDHA", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.SDC", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"\\_SB.PCI0.XHC", 0x1, Package() {0, Package() {0xFF, 3}}},
+ Package() {"INTELAUDIO\\FUNC_01&VEN_8086&DEV_280*", 0x1, Package(){0, Package (){0xFF, 3}}},
+ Package() {"\\_SB.PCI0.RP02.PXSX", 0x0, Package() {0, Package() {0xFF, 0}}},
+ })
+
+ Name(BCCD, Package() // Bugcheck Critical Device(s)
+ {
+ //
+ // 1: ACPI Device Descriptor: Fully Qualified name string
+ // 2: Package of packages: 1 or more specific commands to power up critical device
+ // 2a: Package: GAS-structure describing location of PEP accessible power control
+ // Refer to ACPI 5.0 spec section 5.2.3.1 for details
+ // a: Address Space ID (0 = System Memory)
+ // NOTE: A GAS Address Space of 0x7F (FFH) indicates remaining package
+ // elements are Intel defined
+ // b: Register bit width (32 = DWORD)
+ // c: Register bit offset
+ // d: Access size (3 = DWORD Access)
+ // e: Address (for System Memory = 64-bit physical address)
+ // 2b: Package containing:
+ // a: AND mask !V not applicable for all Trigger Types
+ // b: Value (bits required to power up the critical device)
+ // c: Trigger Type:
+ // 0 = Read
+ // 1 = Write
+ // 2 = Write followed by Read
+ // 3 = Read Modify Write
+ // 4 = Read Modify Write followed by Read
+ // 2c: Power up delay: Time delay before next operation in uSec
+ //
+ Package() {"\\_SB.PCI0.SATA", Package() {
+ Package() {Package() {1, 8, 0, 1, 0xB2}, // GAS Structure 8-bit IO Port
+ Package() {0x0, 0xCD, 0x1}, // Write 0xCD
+ 16000} // Power up delay = 16ms
+ }
+ },
+ Package() {"\\_SB.PCI0.SATA.PRT0", Package(){
+ Package() {Package() {1, 8, 0, 1, 0xB2}, // GAS Structure 8-bit IO Port
+ Package() {0x0, 0xCD, 0x1}, // Write 0xCD
+ 16000} // Power up delay = 16ms
+ }
+ },
+ Package() {"\\_SB.PCI0.SATA.PRT1", Package(){
+ Package() {Package() {1, 8, 0, 1, 0xB2}, // GAS Structure 8-bit IO Port
+ Package() {0x0, 0xCD, 0x1}, // Write 0xCD
+ 16000} // Power up delay = 16ms
+ }
+ },
+ })
+
+ Method(_STA, 0x0, NotSerialized)
+ {
+ If (LOr(LGreaterEqual(OSYS,2015), LAnd(LGreaterEqual(OSYS,2012),LEqual(S0ID, 1)))) {
+ Return(0xf)
+ }
+ Return(0)
+ }
+
+ Method(_DSM, 0x4, Serialized)
+ {
+
+ If (LEqual(Arg0,ToUUID("c4eb40a0-6cd2-11e2-bcfd-0800200c9a66"))) {
+ // Number of Functions (including this one)
+ If (LEqual(Arg2, Zero)) {
+ Return(Buffer(One){0x07})
+ }
+
+ If (LEqual(\_PR.NLPC, 1)) {
+ Store (0x01, Index (DeRefOf(Index (DEVY, 0)), 1)) // 0 - CPU-0
+ Store (0x00, Index (DeRefOf(Index (DEVY, 1)), 1)) // 1 - CPU-1
+ Store (0x00, Index (DeRefOf(Index (DEVY, 2)), 1)) // 2 - CPU-2
+ Store (0x00, Index (DeRefOf(Index (DEVY, 3)), 1)) // 3 - CPU-3
+ }
+
+ If (LEqual(\_PR.NLPC, 2)) {
+ Store (0x01, Index (DeRefOf(Index (DEVY, 0)), 1)) // 0 - CPU-0
+ Store (0x00, Index (DeRefOf(Index (DEVY, 1)), 1)) // 1 - CPU-1
+ Store (0x01, Index (DeRefOf(Index (DEVY, 2)), 1)) // 2 - CPU-2
+ Store (0x00, Index (DeRefOf(Index (DEVY, 3)), 1)) // 3 - CPU-3
+ }
+
+ If (LEqual(\_PR.NLPC, 3)) {
+ Store (0x01, Index (DeRefOf(Index (DEVY, 0)), 1)) // 0 - CPU-0
+ Store (0x01, Index (DeRefOf(Index (DEVY, 1)), 1)) // 1 - CPU-1
+ Store (0x01, Index (DeRefOf(Index (DEVY, 2)), 1)) // 2 - CPU-2
+ Store (0x00, Index (DeRefOf(Index (DEVY, 3)), 1)) // 3 - CPU-3
+ }
+
+ If (LEqual(\_PR.NLPC, 4)) {
+ Store (0x01, Index (DeRefOf(Index (DEVY, 0)), 1)) // 0 - CPU-0
+ Store (0x01, Index (DeRefOf(Index (DEVY, 1)), 1)) // 1 - CPU-1
+ Store (0x01, Index (DeRefOf(Index (DEVY, 2)), 1)) // 2 - CPU-2
+ Store (0x01, Index (DeRefOf(Index (DEVY, 3)), 1)) // 3 - CPU-3
+ }
+
+ If (LEqual(ODBG, 0)) {
+ Store (0x01, Index (DeRefOf(Index (DEVY, 8)), 1)) // URT-3
+ }
+
+ If (LEqual(ODBG, 1)) {
+ Store (0x00, Index (DeRefOf(Index (DEVY, 8)), 1)) // URT-3
+ }
+
+ If (\_SB.PCI0.RP02.PXSX.WIST()) {
+ Store (3, Index(DeRefOf(Index(DeRefOf(Index (DeRefOf(Index (DEVY, 27)), 2)), 1)), 1)) // 27 - RP02
+ Store (0x01, Index (DeRefOf(Index (DEVY, 27)), 1)) // 27 - RP02
+ }
+
+ // Device Constraints Enumeration
+ If (LEqual(Arg2, One)) {
+ If (LEqual(S0ID, 1)) {
+ Return(DEVY)
+ }
+ Return(Package() {0})
+ }
+ // BCCD
+ If (LEqual(Arg2, 2)) {
+ Return(BCCD)
+ }
+ // Screen off notification
+ If (LEqual(Arg2, 0x3)) {
+
+ }
+
+ // Screen on notification
+ If (LEqual(Arg2, 0x4)) {
+
+ }
+
+ // resiliency phase entry (deep standby entry)
+ If (LEqual(Arg2, 0x5)) {
+ If (LEqual(S0ID, 1)) { //S0ID: >=1: CS 0: non-CS
+ // call method specific to CS platforms when the system is in a
+ // standby state with very limited SW activities
+ \GUAM(1) // 0x01 - Power State Standby (CS Entry)
+ }
+ }
+
+ // resiliency phase exit (deep standby exit)
+ If (LEqual(Arg2, 0x6)) {
+ If (LEqual(S0ID, 1)) { //S0ID: >=1: CS 0: non-CS
+ // call method specific to CS platforms when the system is in a
+ // standby state with very limited SW activities
+ \GUAM(0) // 0x00 - Power State On (CS Exit)
+ }
+ }
+ }// If(LEqual(Arg0,ToUUID("c4eb40a0-6cd2-11e2-bcfd-0800200c9a66")))
+ Return(One)
+ } // Method(_DSM)
+ } //device (PEPD)
+} // End Scope(\_SB)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Platform.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Platform.asl new file mode 100644 index 0000000000..7847f2f6dc --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Platform.asl @@ -0,0 +1,783 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+// Define the following External variables to prevent a WARNING when
+// using ASL.EXE and an ERROR when using IASL.EXE.
+
+External(PDC0)
+External(PDC1)
+External(PDC2)
+External(PDC3)
+External(\_PR.CPU0._PPC, IntObj)
+External(\_SB.PCI0.LPCB.TPM.PTS, MethodObj)
+Name(ECUP, 1) // EC State indicator: 1- Normal Mode 0- Low Power Mode
+Mutex(EHLD, 0) // EC Hold indicator: 0- No one accessing the EC Power State 1- Someone else is accessing the EC Power State
+
+External(\_SB.IETM,DeviceObj)
+External(\_SB.IETM.ODVP,MethodObj)
+External(\_SB.IETM.ODVX,PkgObj)
+External(\_SB.TPM.PTS, MethodObj)
+Name (ADW1, 0)
+
+//
+// Create a Global MUTEX.
+//
+Mutex(MUTX,0)
+
+// Define Port 80 as an ACPI Operating Region to use for debugging. Please
+// note that the Intel CRBs have the ability to ouput an entire DWord to
+// Port 80h for debugging purposes, so the model implemented here may not be
+// able to be used on OEM Designs.
+
+OperationRegion(PRT0,SystemIO,0x80,4)
+Field(PRT0,DwordAcc,Lock,Preserve)
+{
+ P80H, 32
+}
+
+// Port 80h Update:
+// Update 8 bits of the 32-bit Port 80h.
+//
+// Arguments:
+// Arg0: 0 = Write Port 80h, Bits 7:0 Only.
+// 1 = Write Port 80h, Bits 15:8 Only.
+// 2 = Write Port 80h, Bits 23:16 Only.
+// 3 = Write Port 80h, Bits 31:24 Only.
+// Arg1: 8-bit Value to write
+//
+// Return Value:
+// None
+
+Method(P8XH,2,Serialized)
+{
+ If (LEqual(Arg0,0)) // Write Port 80h, Bits 7:0.
+ {
+ Store(Or(And(P80D,0xFFFFFF00),Arg1),P80D)
+ }
+
+ If (LEqual(Arg0,1)) // Write Port 80h, Bits 15:8.
+ {
+ Store(Or(And(P80D,0xFFFF00FF),ShiftLeft(Arg1,8)),P80D)
+ }
+
+ If (LEqual(Arg0,2)) // Write Port 80h, Bits 23:16.
+ {
+ Store(Or(And(P80D,0xFF00FFFF),ShiftLeft(Arg1,16)),P80D)
+ }
+
+ If (LEqual(Arg0,3)) // Write Port 80h, Bits 31:24.
+ {
+ Store(Or(And(P80D,0x00FFFFFF),ShiftLeft(Arg1,24)),P80D)
+ }
+
+ Store(P80D,P80H)
+}
+
+//
+// Define SW SMI port as an ACPI Operating Region to use for generate SW SMI.
+//
+OperationRegion (SPRT, SystemIO, 0xB2, 2)
+Field (SPRT, ByteAcc, Lock, Preserve) {
+ SSMP, 8
+}
+
+// The _PIC Control Method is optional for ACPI design. It allows the
+// OS to inform the ASL code which interrupt controller is being used,
+// the 8259 or APIC. The reference code in this document will address
+// PCI IRQ Routing and resource allocation for both cases.
+//
+// The values passed into _PIC are:
+// 0 = 8259
+// 1 = IOAPIC
+
+Method(\_PIC,1)
+{
+ Store(Arg0,GPIC)
+ Store(Arg0,PICM)
+}
+
+OperationRegion(SWC0, SystemIO, 0x610, 0x0F)
+Field(SWC0, ByteAcc, NoLock, Preserve)
+{
+ G1S, 8, //SWC GPE1_STS
+ Offset(0x4),
+ G1E, 8,
+ Offset(0xA),
+ G1S2, 8, //SWC GPE1_STS_2
+ G1S3, 8 //SWC GPE1_STS_3
+}
+
+OperationRegion (SWC1, SystemIO, \PMBS, 0x2C)
+Field(SWC1, DWordAcc, NoLock, Preserve)
+{
+ Offset(0x20),
+ G0S, 32, //GPE0_STS
+ Offset(0x28),
+ G0EN, 32 //GPE0_EN
+}
+
+OperationRegion (PMCM, SystemMemory, Add(DD1A,0x1000), 0x1000)
+Field (PMCM, ByteAcc, NoLock, Preserve)
+{
+ Offset (0x94),
+ DHPD, 32, // DISPLAY_HPD_CTL
+}
+
+// Prepare to Sleep. The hook is called when the OS is about to
+// enter a sleep state. The argument passed is the numeric value of
+// the Sx state.
+
+Method(_PTS,1)
+{
+ Store(0,P80D) // Zero out the entire Port 80h DWord.
+ P8XH(0,Arg0) // Output Sleep State to Port 80h, Byte 0.
+
+ //clear the 3 SWC status bits
+ Store(Ones, G1S3)
+ Store(Ones, G1S2)
+ Store(1, G1S)
+
+ //set SWC GPE1_EN
+ Store(1,G1E)
+
+ //clear GPE0_STS
+ Store(Ones, G0S)
+
+ //
+ // Call TPM PTS method
+ //
+ \_SB.TPM.PTS (Arg0)
+
+ //
+ // Set GPIO_116 (SOC_CODEC_IRQ) 20k pull-down for device I2S audio codec INT343A before enter S3/S4
+ //
+ If (LAnd (LEqual (IOBF, 3), LEqual (IS3A, 1))) {
+ Store (\_SB.GPC1 (NW_GPIO_116), ADW1)
+ Or (ADW1, 0xFFFFC3FF, ADW1)
+ And (ADW1, 0x00001000, ADW1)
+ \_SB.SPC1 (NW_GPIO_116, ADW1)
+ }
+}
+
+// Wake. This hook is called when the OS is about to wake from a
+// sleep state. The argument passed is the numeric value of the
+// sleep state the system is waking from.
+
+Method(_WAK,1,Serialized)
+{
+ P8XH(1,0xAB) // Beginning of _WAK.
+
+ If (NEXP) {
+ // Reinitialize the Native PCI Express after resume
+ If (And(OSCC,0x02)) {
+ \_SB.PCI0.NHPG()
+ }
+
+ If (And(OSCC,0x04)) {
+ // PME control granted?
+ \_SB.PCI0.NPME()
+ }
+ }
+
+ If (LOr(LEqual(Arg0,3), LEqual(Arg0,4))) { // If S3 or S4 Resume
+ If (LEqual(PFLV,FMBL)) {
+ //
+ // if battery has changed from previous state i.e after Hibernate
+ // then update the PWRS and update the SMM Power state
+ //
+ If (LEqual(Arg0,4)) {
+ // Perform needed ACPI Notifications.
+ PNOT()
+ }
+ }
+
+
+ // Windows XP SP2 does not properly restore the P-State
+ // upon resume from S4 or S3 with degrade modes enabled.
+ // Use the existing _PPC methods to cycle the available
+ // P-States such that the processor ends up running at
+ // the proper P-State.
+ //
+ // Note: For S4, another possible W/A is to always boot
+ // the system in LFM.
+ //
+ If (LEqual(OSYS,2002)) {
+ If (LGreater(\_PR.CPU0._PPC,0)) {
+ Subtract(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC)
+ PNOT()
+ Add(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC)
+ PNOT()
+ } Else {
+ Add(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC)
+ PNOT()
+ Subtract(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC)
+ PNOT()
+ }
+ }
+
+ //
+ // Invoke SD card wake up method
+ //
+ \_SB.PCI0.SDC.WAK()
+ }
+ Return(Package(){0,0})
+}
+
+
+// Power Notification:
+// Perform all needed OS notifications during a
+// Power Switch.
+//
+// Arguments:
+// None
+//
+// Return Value:
+// None
+
+Method(PNOT,0,Serialized)
+{
+ //
+ // If MP enabled and driver support is present, notify both
+ // processors.
+ //
+ If (MPEN) {
+ If (And(PDC0,0x0008)) {
+ Notify(\_PR.CPU0,0x80) // Eval CPU0 _PPC.
+
+ If (And(PDC0,0x0010)) {
+ Sleep(100)
+ Notify(\_PR.CPU0,0x81) // Eval _CST.
+ }
+ }
+
+ If (And(PDC1,0x0008)) {
+ Notify(\_PR.CPU1,0x80) // Eval CPU1 _PPC.
+
+ If (And(PDC1,0x0010)) {
+ Sleep(100)
+ Notify(\_PR.CPU1,0x81) // Eval _CST.
+ }
+ }
+
+ If (And(PDC2,0x0008)) {
+ Notify(\_PR.CPU2,0x80) // Eval CPU2 _PPC.
+
+ If (And(PDC2,0x0010)) {
+ Sleep(100)
+ Notify(\_PR.CPU2,0x81) // Eval _CST.
+ }
+ }
+
+ If (And(PDC3,0x0008)) {
+ Notify(\_PR.CPU3,0x80) // Eval CPU3 _PPC.
+
+ If (And(PDC3,0x0010)) {
+ Sleep(100)
+ Notify(\_PR.CPU3,0x81) // Eval _CST.
+ }
+ }
+ } Else {
+ Notify(\_PR.CPU0,0x80) // Eval _PPC.
+ Sleep(100)
+ Notify(\_PR.CPU0,0x81) // Eval _CST
+ }
+
+ If (LEqual(\DPTE,1)) {
+ Notify(\_SB.IETM, 0x86) // Notification sent to DPTF driver (Policy) for PDRT reevaluation after AC/DC transtion has occurred.
+ }
+} //end of PNOT
+
+Name(CLMP, 0) // save the clamp bit
+Name(PLEN, 0) // save the power limit enable bit
+Name(PLSV, 0x8000) // save value of PL1 upon entering CS
+Name(CSEM, 0) //semaphore to avoid multiple calls to SPL1. SPL1/RPL1 must always be called in pairs, like push/pop off a stack
+//
+// SPL1 (Set PL1 to 4.5 watts with clamp bit set)
+// Per Legacy Thermal management CS requirements, we would like to set the PL1 limit when entering CS to 4.5W with clamp bit set via MMIO.
+// This can be done in the ACPI object which gets called by graphics driver during CS Entry.
+// Likewise, during CS exit, the BIOS must reset the PL1 value to the previous value prior to CS entry and reset the clamp bit.
+//
+// Arguments:
+// None
+//
+// Return Value:
+// None
+Method(SPL1,0,Serialized)
+{
+ If (LEqual(CSEM, 1))
+ {
+ Return() // we have already been called, must have CS exit before calling again
+ }
+ Store(1, CSEM) // record first call
+}
+//
+// RPL1 (Restore the PL1 register to the values prior to CS entry)
+//
+// Arguments:
+// None
+//
+// Return Value:
+// None
+Method(RPL1,0,Serialized)
+{
+ Store(0, CSEM) // restore semaphore
+}
+
+Name(DDPS, 0) // Current Display Power Status. 0= D0; non-zero = Dx state;. Initial value is zero.
+Name(UAMS, 0) // User Absent Mode state, Zero - User Present; non-Zero - User not present
+// GUAM - Global User Absent Mode
+// Run when a change to User Absent mode is made, e.g. screen/display on/off events.
+// Any device that needs notifications of these events includes its own UAMN Control Method.
+//
+// Arguments:
+// Power State:
+// 00h = On
+// 01h = Standby
+// 02h = Suspend
+// 04h = Off
+// 08h = Reduced On
+//
+// Return Value:
+// None
+//
+Method(GUAM,1,Serialized)
+{
+ If (LNotEqual(Arg0, DDPS)) { // Display controller D-State changed?
+ Store(Arg0, DDPS) //Update DDPS to current state
+ Store(LAnd(Arg0, LNot(PWRS)), UAMS) // UAMS: User Absent Mode state, Zero - User Present; non-Zero - User not present
+
+ //Port 80 code for CS
+ If (Arg0) {
+
+
+ If (PLCS) {
+ SPL1() // set PL1 to low value upon CS entry
+ }
+ } Else {
+
+ }
+
+ P_CS() // Powergating during CS
+ }
+}
+
+// Power CS Powergated Devices:
+// Method to enable/disable power during CS
+Method(P_CS,0,Serialized)
+{
+}
+
+//
+// System Bus
+//
+Scope(\_SB)
+{
+ Scope(PCI0)
+ {
+ Method(_INI,0)
+ {
+ // Determine the OS and store the value, where:
+ //
+ // OSYS = 2000 = WIN2000.
+ // OSYS = 2001 = WINXP, RTM or SP1.
+ // OSYS = 2002 = WINXP SP2.
+ // OSYS = 2006 = Vista.
+ // OSYS = 2009 = Windows 7 and Windows Server 2008 R2.
+ // OSYS = 2012 = Windows 8 and Windows Server 2012.
+ // OSYS = 2013 = Windows Blue.
+ // OSYS = 2015 = Windows 10.
+ //
+ // Assume Windows 2000 at a minimum.
+
+ Store(2000,OSYS)
+
+ // Check for a specific OS which supports _OSI.
+
+ If (CondRefOf(\_OSI)) {
+ // Linux returns _OSI = TRUE for numerous Windows
+ // strings so that it is fully compatible with
+ // BIOSes available in the market today. There are
+ // currently 2 known exceptions to this model:
+ // 1) Video Repost - Linux supports S3 without
+ // requiring a Driver, meaning a Video
+ // Repost will be required.
+ // 2) On-Screen Branding - a full CMT Logo
+ // is limited to the WIN2K and WINXP
+ // Operating Systems only.
+
+ // Use OSYS for Windows Compatibility.
+
+ If(\_OSI("Windows 2001")) // Windows XP
+ {
+ Store(2001,OSYS)
+ }
+
+ If(\_OSI("Windows 2001 SP1")) // Windows XP SP1
+ {
+ Store(2001,OSYS)
+ }
+
+ If(\_OSI("Windows 2001 SP2")) // Windows XP SP2
+ {
+ Store(2002,OSYS)
+ }
+
+ If(\_OSI("Windows 2006")) // Windows Vista
+ {
+ Store(2006,OSYS)
+ }
+
+ If(\_OSI("Windows 2009")) // Windows 7 and Windows Server 2008 R2
+ {
+ Store(2009,OSYS)
+ }
+
+ If(\_OSI("Windows 2012")) //Windows 8 and Windows Server 2012
+ {
+ Store(2012,OSYS)
+ }
+
+ If(\_OSI("Windows 2013")) //Windows 8.1 and Windows Server 2012 R2
+ {
+ Store(2013,OSYS)
+ }
+
+ If(\_OSI("Windows 2015")) //Windows 10
+ {
+ Store(2015,OSYS)
+ }
+ //
+ // If CMP is enabled, enable SMM C-State
+ // coordination. SMM C-State coordination
+ // will be disabled in _PDC if driver support
+ // for independent C-States deeper than C1
+ // is indicated.
+ }
+ }
+
+ Method(NHPG,0,Serialized)
+ {
+ Store(0,^RP01.HPEX) // clear the hot plug SCI enable bit
+ Store(0,^RP02.HPEX) // clear the hot plug SCI enable bit
+ Store(0,^RP03.HPEX) // clear the hot plug SCI enable bit
+ Store(0,^RP04.HPEX) // clear the hot plug SCI enable bit
+ Store(0,^RP05.HPEX) // clear the hot plug SCI enable bit
+ Store(0,^RP06.HPEX) // clear the hot plug SCI enable bit
+ Store(1,^RP01.HPSX) // clear the hot plug SCI status bit
+ Store(1,^RP02.HPSX) // clear the hot plug SCI status bit
+ Store(1,^RP03.HPSX) // clear the hot plug SCI status bit
+ Store(1,^RP04.HPSX) // clear the hot plug SCI status bit
+ Store(1,^RP05.HPSX) // clear the hot plug SCI status bit
+ Store(1,^RP06.HPSX) // clear the hot plug SCI status bit
+ }
+
+ Method(NPME,0,Serialized)
+ {
+ Store(0,^RP01.PMEX) // clear the PME SCI enable bit
+ Store(0,^RP02.PMEX) // clear the PME SCI enable bit
+ Store(0,^RP03.PMEX) // clear the PME SCI enable bit
+ Store(0,^RP04.PMEX) // clear the PME SCI enable bit
+ Store(0,^RP05.PMEX) // clear the PME SCI enable bit
+ Store(0,^RP06.PMEX) // clear the PME SCI enable bit
+ Store(1,^RP01.PMSX) // clear the PME SCI status bit
+ Store(1,^RP02.PMSX) // clear the PME SCI status bit
+ Store(1,^RP03.PMSX) // clear the PME SCI status bit
+ Store(1,^RP04.PMSX) // clear the PME SCI status bit
+ Store(1,^RP05.PMSX) // clear the PME SCI status bit
+ Store(1,^RP06.PMSX) // clear the PME SCI status bit
+ }
+ } // end Scope(PCI0)
+
+ //--------------------
+ // GPIO
+ //--------------------
+
+ Device (GPO0) // North Community for DFx GPIO, SATA GPIO, PWM, LPSS/ISH UARTs, IUnit GPIO, JTAG, and SVID
+ {
+ Name (_ADR, 0)
+ Name (_HID, "INT3452")
+ Name (_CID, "INT3452")
+ Name (_DDN, "General Purpose Input/Output (GPIO) Controller - North" )
+ Name (_UID, 1)
+ Name (LINK, "\\_SB.GPO0") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00004000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {14}
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField(^RBUF, ^BAR0._BAS, B0BA)
+ CreateDwordField(^RBUF, ^BAR0._LEN, B0LN)
+ Store(GP0A, B0BA)
+ Store(GP0L, B0LN)
+ Return (RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ Return(0xf)
+ }
+ // Track status of GPIO OpRegion availability for this controller
+ Name(AVBL, 0)
+ Method(_REG,2) {
+ If (Lequal(Arg0, 8)) {
+ Store(Arg1, ^AVBL)
+ }
+ }
+
+ OperationRegion(GPOP, SystemMemory, GP0A, GP0L)
+ Field(\_SB.GPO0.GPOP, ByteAcc, NoLock, Preserve) {
+ Offset(0x578), //PIN 15:15 * 8 + 0x500 // WiFi Reset
+ CWLE, 1,
+ Offset(0x5B0), //PIN 22:22 * 8 + 0x500 // SATA_ODD_PWRGT_R
+ ODPW, 1
+ }
+ } // Device (GPO0)
+
+ Device (GPO1) // Northwest Community for Display GPIO, PMC, Audio, and SPI
+ {
+ Name (_ADR, 0)
+ Name (_HID, "INT3452")
+ Name (_CID, "INT3452")
+ Name (_DDN, "General Purpose Input/Output (GPIO) Controller - Northwest" )
+ Name (_UID, 2)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00004000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {14}
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField(^RBUF, ^BAR0._BAS, B0BA)
+ CreateDwordField(^RBUF, ^BAR0._LEN, B0LN)
+ Store(GP1A, B0BA)
+ Store(GP1L, B0LN)
+ Return (RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ If (LLess(OSYS,2012)) {
+ // Don't report this GPIO for WIN7
+ Return (0)
+ }
+ Return(0xf)
+ }
+
+ } //Device (GPO1)
+
+
+ Device (GPO2) // West Community for LPSS/ISH I2C, ISH GPIO, iCLK, and PMU
+ {
+ Name (_ADR, 0)
+ Name (_HID, "INT3452")
+ Name (_CID, "INT3452")
+ Name (_DDN, "General Purpose Input/Output (GPIO) Controller - West" )
+ Name (_UID, 3)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00004000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {14}
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField(^RBUF, ^BAR0._BAS, B0BA)
+ CreateDwordField(^RBUF, ^BAR0._LEN, B0LN)
+ Store(GP2A, B0BA)
+ Store(GP2L, B0LN)
+ Return (RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ If (LLess(OSYS,2012)) {
+ // Don't report this GPIO for WIN7
+ Return (0)
+ }
+ Return(0xf)
+ }
+ } //Device (GPO2)
+
+ Device (GPO3) // Southwest Community for EMMC, SDIO, SDCARD, SMBUS, and LPC
+ {
+ Name (_ADR, 0)
+ Name (_HID, "INT3452")
+ Name (_CID, "INT3452")
+ Name (_DDN, "General Purpose Input/Output (GPIO) Controller - Southwest" )
+ Name (_UID, 4)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x00004000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {14}
+ })
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ CreateDwordField(^RBUF, ^BAR0._BAS, B0BA)
+ CreateDwordField(^RBUF, ^BAR0._LEN, B0LN)
+ Store(GP3A, B0BA)
+ Store(GP3L, B0LN)
+ Return (RBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ If(LLess(OSYS,2012)) {
+ // Don't report this GPIO for WIN7
+ Return (0)
+ }
+ Return(0xf)
+ }
+
+ // Track status of GPIO OpRegion availability for this controller
+ Name(AVBL, 0)
+ Method(_REG,2) {
+ If (Lequal(Arg0, 8)) {
+ Store(Arg1, ^AVBL)
+ }
+ }
+
+ OperationRegion(GPOP, SystemMemory, GP3A, GP3L)
+ Field(\_SB.GPO3.GPOP, ByteAcc, NoLock, Preserve) {
+ Offset(0x5F0), //PIN 30: 30 * 8 + 0x500 // GPIO_183 SD_CARD_PWR_EN_N
+ SDPC, 1
+ }
+ } //Device (GPO3)
+
+
+} // end Scope(\_SB)
+
+Scope (\)
+{
+ //
+ // Global Name, returns current Interrupt controller mode;
+ // updated from _PIC control method
+ //
+ Name(PICM, 0)
+
+ //
+ // Procedure: GPRW
+ //
+ // Description: Generic Wake up Control Method ("Big brother")
+ // to detect the Max Sleep State available in ASL Name scope
+ // and Return the Package compatible with _PRW format.
+ // Input: Arg0 = bit offset within GPE register space device event will be triggered to.
+ // Arg1 = Max Sleep state, device can resume the System from.
+ // If Arg1 = 0, Update Arg1 with Max _Sx state enabled in the System.
+ // Output: _PRW package
+ //
+ Name(PRWP, Package(){Zero, Zero}) // _PRW Package
+
+ Method(GPRW, 2)
+ {
+ Store(Arg0, Index(PRWP, 0)) // copy GPE#
+ //
+ // SS1-SS4 - enabled in BIOS Setup Sleep states
+ //
+ Store(ShiftLeft(SS1,1),Local0) // S1 ?
+ Or(Local0,ShiftLeft(SS2,2),Local0) // S2 ?
+ Or(Local0,ShiftLeft(SS3,3),Local0) // S3 ?
+ Or(Local0,ShiftLeft(SS4,4),Local0) // S4 ?
+ //
+ // Local0 has a bit mask of enabled Sx(1 based)
+ // bit mask of enabled in BIOS Setup Sleep states(1 based)
+ //
+ If (And(ShiftLeft(1, Arg1), Local0)) {
+ //
+ // Requested wake up value (Arg1) is present in Sx list of available Sleep states
+ //
+ Store(Arg1, Index(PRWP, 1)) // copy Sx#
+ } Else {
+ //
+ // Not available -> match Wake up value to the higher Sx state
+ //
+ ShiftRight(Local0, 1, Local0)
+ // If(LOr(LEqual(OSFL, 1), LEqual(OSFL, 2))) { // ??? Win9x
+ // FindSetLeftBit(Local0, Index(PRWP,1)) // Arg1 == Max Sx
+ // } Else { // ??? Win2k / XP
+ FindSetLeftBit(Local0, Index(PRWP,1)) // Arg1 == Min Sx
+ // }
+ }
+
+ Return(PRWP)
+ }
+}
+
+Scope (\_SB)
+{
+ Name(OSCI, 0) // \_SB._OSC DWORD2 input
+ Name(OSCO, 0) // \_SB._OSC DWORD2 output
+ Name(OSCP, 0) // \_SB._OSC CAPABILITIES
+ // _OSC (Operating System Capabilities)
+ // _OSC under \_SB scope is used to convey platform wide OSPM capabilities.
+ // For a complete description of _OSC ACPI Control Method, refer to ACPI 5.0
+ // specification, section 6.2.10.
+ // Arguments: (4)
+ // Arg0 - A Buffer containing the UUID "0811B06E-4A27-44F9-8D60-3CBBC22E7B48"
+ // Arg1 - An Integer containing the Revision ID of the buffer format
+ // Arg2 - An Integer containing a count of entries in Arg3
+ // Arg3 - A Buffer containing a list of DWORD capabilities
+ // Return Value:
+ // A Buffer containing the list of capabilities
+ //
+ Method(_OSC,4,Serialized)
+ {
+ //
+ // Point to Status DWORD in the Arg3 buffer (STATUS)
+ //
+ CreateDWordField(Arg3, 0, STS0)
+ //
+ // Point to Caps DWORDs of the Arg3 buffer (CAPABILITIES)
+ //
+ CreateDwordField(Arg3, 4, CAP0)
+
+ //
+ // Check UUID
+ //
+ If (LEqual(Arg0,ToUUID("0811B06E-4A27-44F9-8D60-3CBBC22E7B48"))) {
+ //
+ // Check Revision
+ //
+ If (LEqual(Arg1,One)) {
+ Store(CAP0, OSCP)
+ If (And(CAP0,0x04)) // Check _PR3 Support(BIT2)
+ {
+ Store(0x04, OSCO)
+ If (LEqual(RTD3,0)) // Is RTD3 support disabled in Bios Setup?
+ {
+ // RTD3 is disabled via BIOS Setup.
+ And(CAP0, 0x3B, CAP0) // Clear _PR3 capability
+ Or(STS0, 0x10, STS0) // Indicate capability bit is cleared
+ }
+ }
+ } Else{
+ And(STS0,0xFFFFFF00,STS0)
+ Or(STS0,0xA, STS0) // Unrecognised Revision and report OSC failure
+ }
+ } Else {
+ And(STS0,0xFFFFFF00,STS0)
+ Or (STS0,0x6, STS0) // Unrecognised UUID and report OSC failure
+ }
+
+ Return(Arg3)
+ } // End _OSC
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Audio/AudioCodec_INT343A.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Audio/AudioCodec_INT343A.asl new file mode 100644 index 0000000000..a1756ec6ef --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Audio/AudioCodec_INT343A.asl @@ -0,0 +1,57 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\IOBF, IntObj) // ScHdAudioIoBufferOwnership
+External(\IS3A, IntObj)
+
+Scope(\_SB.PCI0.I2C0) {
+ //-----------------------------------
+ // HD Audio I2S Codec device
+ // ALC 298
+ // I2C1
+ // GPIO_192:SOC_CODEC_PD_N North West Community number 5
+ // GPIO_116:SOC_CODEC_IRQ North West Community, direct IRQ, IRQ number 0x5B.
+ //-----------------------------------
+ Device (HDAC)
+ {
+ Name (_HID, "INT343A")
+ Name (_CID, "INT343A")
+ Name (_DDN, "Intel(R) Smart Sound Technology Audio Codec")
+ Name (_UID, 1)
+ Name (CADR, 0) // Codec I2C address
+
+ Method(_INI) {
+ }
+
+ Method (_CRS, 0, Serialized) {
+ Name (SBFB, ResourceTemplate () {
+ I2cSerialBus (0x1C, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.PCI0.I2C0",,,)
+ })
+
+ Name (SBFI, ResourceTemplate () {
+ Interrupt (ResourceConsumer, Level, ActiveLow, ExclusiveAndWake,,,) {0x5B}
+ })
+
+ Return (ConcatenateResTemplate(SBFB, SBFI))
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ If (LAnd (LEqual (IOBF, 3), LEqual(IS3A, 1))) {
+ Return (0xF) // I2S Codec Enabled
+ }
+ Return (0)
+ }
+ } // Device (HDAC)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Audio/AudioCodec_INT34C1.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Audio/AudioCodec_INT34C1.asl new file mode 100644 index 0000000000..562f3bd0f2 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Audio/AudioCodec_INT34C1.asl @@ -0,0 +1,57 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\ISC1, IntObj)
+
+Scope(\_SB.PCI0.I2C1)
+{
+ Device (ACD0) // Audio Codec driver I2C
+ {
+ Name (_ADR, 0x38)
+ Name (_HID, "INT34C1")
+ Name (_CID, "INT34C1")
+ Name (_DDN, "Intel(R) Smart Sound Technology Audio Codec" )
+ Name (_UID, 1)
+
+ Method(_CRS, 0x0, Serialized)
+ {
+ Name(SBUF,ResourceTemplate ()
+ {
+ I2CSerialBus(
+ 0x38, // SlaveAddress: bus address
+ , // SlaveMode: default to ControllerInitiated
+ 400000, // ConnectionSpeed: in Hz
+ , // Addressing Mode: default to 7 bit
+ "\\_SB.PCI0.I2C1", // ResourceSource: I2C bus controller name
+ , // Descriptor Name: creates name for offset of resource descriptor
+ ) // VendorData
+ GpioInt(Level, ActiveLow, ExclusiveAndWake, PullUp, 0,"\\_SB.GPO1") {69} // SOC_CODEC_IRQ
+ })
+ Return (SBUF)
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ If (LEqual (ISC1, 1)) {
+ Return (0xF) // I2S Codec Enabled
+ }
+ Return (0)
+ }
+
+ Method (_DIS, 0x0, NotSerialized)
+ {
+ }
+
+ } // Device (ACD0)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Bluetooth/Bluetooth_BCM2E40.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Bluetooth/Bluetooth_BCM2E40.asl new file mode 100644 index 0000000000..a001d67357 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Bluetooth/Bluetooth_BCM2E40.asl @@ -0,0 +1,55 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0.URT1)
+{
+ Device(BTH0) {
+ Method(_HID) {
+ // Return HID based on BIOS Setup
+ Return("BCM2EA8")
+ }
+
+ Method(_INI) {
+ }
+
+ Method(_CRS, 0x0, Serialized) {
+ Name(SBFG, ResourceTemplate (){
+ UARTSerialBus(115200,,,0xc0,,,FlowControlHardware,32,32,"\\_SB.PCI0.URT1" )
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO1", ) {27} // North-west(27):GPIO_214 NGFF_BT_DEV_WAKE_N
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO2", ) {24} // West(24):GPIO_154, BT_DISABLE2_1P8_N
+ GpioInt (Level, ActiveLow, Exclusive, PullDefault, 0x0000, "\\_SB.GPO1", 0x00, ResourceConsumer, ) {35}
+ })
+
+ Name(SBFI, ResourceTemplate () {
+ UARTSerialBus(115200,,,0xc0,,,FlowControlHardware,32,32,"\\_SB.PCI0.URT1" )
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO1", ) {27} // North-west(27):GPIO_214 NGFF_BT_DEV_WAKE_N
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO2", ) {24} // West(24):GPIO_154, BT_DISABLE2_1P8_N
+ Interrupt(ResourceConsumer, Level, ActiveLow, Exclusive, ) {0x34}
+ })
+
+ If(LLess(OSYS,2012)) { return (SBFI) } // For Windows 7 only report Interrupt; it doesn't support ACPI5.0 and wouldn't understand GpioInt nor I2cBus
+ Return (SBFG)
+ }
+
+ Method (_STA, 0x0, NotSerialized) {
+ If (LEqual (SBTD, 1)) {
+ Return (0xF)
+ }
+ Return (0)
+ }
+
+ Name (_S0W, 2) // required to put the device to D2 during S0 idle
+ } // Device BTH0
+
+} // end Scope(\_SB.PCI0.URT1)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Bluetooth/Bluetooth_BCM2EA1.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Bluetooth/Bluetooth_BCM2EA1.asl new file mode 100644 index 0000000000..815c6d3a98 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Bluetooth/Bluetooth_BCM2EA1.asl @@ -0,0 +1,55 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0.URT1)
+{
+ Device(BTH0) {
+ Method(_HID) {
+ // Return HID based on BIOS Setup
+ Return("BCM2EA1")
+ }
+
+ Method(_INI) {
+ }
+
+ Method(_CRS, 0x0, Serialized) {
+ Name(SBFG, ResourceTemplate (){
+ UARTSerialBus(115200,,,0xc0,,,FlowControlHardware,32,32,"\\_SB.PCI0.URT1" )
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO1", ) {27} // North-west(27):GPIO_214 NGFF_BT_DEV_WAKE_N
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO2", ) {24} // West(24):GPIO_154, BT_DISABLE2_1P8_N
+ GpioInt (Level, ActiveLow, Exclusive, PullDefault, 0x0000, "\\_SB.GPO1", 0x00, ResourceConsumer, ) {35}
+ })
+
+ Name(SBFI, ResourceTemplate () {
+ UARTSerialBus(115200,,,0xc0,,,FlowControlHardware,32,32,"\\_SB.PCI0.URT1" )
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO1", ) {27} // North-west(27):GPIO_214 NGFF_BT_DEV_WAKE_N
+ GpioIo(Exclusive, PullDown, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO2", ) {24} // West(24):GPIO_154, BT_DISABLE2_1P8_N
+ Interrupt(ResourceConsumer, Level, ActiveLow, Exclusive, ) {0x34}
+ })
+
+ If(LLess(OSYS,2012)) { return (SBFI) } // For Windows 7 only report Interrupt; it doesn't support ACPI5.0 and wouldn't understand GpioInt nor I2cBus
+ Return (SBFG)
+ }
+
+ Method (_STA, 0x0, NotSerialized) {
+ If (LEqual (SBTD, 2)) {
+ Return (0xF)
+ }
+ Return (0)
+ }
+
+ Name (_S0W, 2) // required to put the device to D2 during S0 idle
+ } // Device BTH0
+
+} // end Scope(\_SB.PCI0.URT1)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_INT3471.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_INT3471.asl new file mode 100644 index 0000000000..585e49d1fd --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_INT3471.asl @@ -0,0 +1,187 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0.I2C2)
+{
+ Device (PMC1) {
+ Name (_ADR, Zero)
+ Name (_HID, "INT3472")
+ Name (_CID, "INT3472")
+ Name (_DDN, "INCL-CRDD")
+ Name (_UID, "0")
+
+ Method (_CRS, 0x0, Serialized) {
+ Name (SBUF, ResourceTemplate() {
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,) {
+ 0x37 // GPIO_67
+ }
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,) {
+ 0x3C // GPIO_72
+ }
+ })
+
+ Return (SBUF)
+ }
+
+ Method (_STA, 0, NotSerialized) {
+ If (LEqual (WCAS, 2)) { // 2-IMX135
+ Return (0x0F)
+ }
+ Return (0x0)
+ }
+
+ Method (CLDB, 0, Serialized) {
+ Name (PAR, Buffer(0x20) {
+ 0x00, //Version
+ 0x01, //Control logic Type 0: UNKNOWN 1: DISCRETE 2: PMIC TPS68470 3: PMIC uP6641
+ 0x00, //Control logic ID: Control Logic 0
+ 0x70, //CRD board Type, 0: UNKNOWN 0x20: CRD-D 0x30: CRD-G 0x40: PPV 0x50: CRD-G2 0x70: CRD_G_BXT
+ 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ })
+ Return (PAR)
+ }
+
+ Method (_DSM, 4, NotSerialized) {
+ If (LEqual (Arg0, ToUUID("79234640-9E10-4FEA-A5C1-B5AA8B19756F"))) {
+ If (LEqual (Arg2, One)) {
+ Return (0x02) // number
+ }
+ If (LEqual (Arg2, 0x02)) {
+ Return (0x01004300) // RESET
+ }
+ If (LEqual (Arg2, 0x03)) {
+ Return (0x01004801) // POWER DOWN
+ }
+ }
+ Return (Zero)
+ }
+ }
+
+ //
+ // Rear Camera IMX135
+ //
+ Device (CAM1) {
+ Name (_ADR, Zero)
+ Name (_HID, "INT3471")
+ Name (_CID, "INT3471")
+ Name (_SUB, "INTL0000")
+ Name (_DDN, "SONY IMX135")
+ Name (_UID, One)
+ Name (_DEP, Package () {
+ \_SB.PCI0.I2C2.PMC1
+ })
+ Name (PLDB, Package(1) {
+ Buffer(0x14)
+ {
+ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x69, 0x0C, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+ Method (_PLD, 0, Serialized) {
+ CreateField(DerefOf(Index(PLDB,0)), 115, 4, RPOS) // Rotation field
+ Store(CROT, RPOS)
+
+ Return(PLDB)
+ }
+
+ Method (_STA, 0, NotSerialized) {
+ If(LEqual (WCAS, 2)) { // 2-IMX135
+ Return (0x0F)
+ }
+ Return (0x0)
+ }
+
+ Method (SSDB, 0, Serialized) {
+ Name (PAR, Buffer(0x6C) {
+ 0x00, //Version
+ 0x70, //SKU: CRD_G_BXT
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, //GUID for CSI2 host controller
+ 0x00, //DevFunction
+ 0x00, //Bus
+ 0x00, 0x00, 0x00, 0x00, //DphyLinkEnFuses
+ 0x00, 0x00, 0x00, 0x00, //ClockDiv
+ 0x06, //LinkUsed
+ 0x04, //LaneUsed
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_CLANE
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_CLANE
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE0
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE0
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE1
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE1
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE2
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE2
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE3
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE3
+ 0x00, 0x00, 0x00, 0x00, //MaxLaneSpeed
+ 0x00, //SensorCalibrationFileIdx
+ 0x00, 0x00, 0x00, //SensorCalibrationFileIdxInMBZ
+ 0x00, //RomType: NONE
+ 0x03, //VcmType: AD5816
+ 0x08, //Platform info BXT
+ 0x00, //Platform sub info
+ 0x03, //Flash ENABLED
+ 0x00, //Privacy LED not supported
+ 0x00, //0 degree
+ 0x01, //MIPI link/lane defined in ACPI
+ 0x00, 0xF8, 0x24, 0x01, // MCLK: 19200000Hz
+ 0x00, //Control logic ID
+ 0x00, 0x00, 0x00,
+ 0x02, // M_CLK Port
+ 0x00, 0x00, 0x00, //Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, //Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, //Reserved
+ })
+ Return (PAR)
+ }
+
+ Method (_CRS, 0, Serialized) {
+ Name (SBUF, ResourceTemplate() {
+ I2CSerialBus(0x0010, ControllerInitiated, 0x00061A80, AddressingMode7Bit,
+ "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer,,)
+ I2CSerialBus(0x000E, ControllerInitiated, 0x00061A80, AddressingMode7Bit,
+ "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer,,)
+ })
+ Return(SBUF)
+ }
+
+ Method (_DSM, 4, NotSerialized)
+ {
+ If (LEqual (Arg0, ToUUID ("822ACE8F-2814-4174-A56B-5F029FE079EE"))) {
+ Return("13P2BAD33")
+ }
+
+ If (LEqual (Arg0, ToUUID ("26257549-9271-4CA4-BB43-C4899D5A4881"))) {
+ If (LEqual (Arg2, One)) {
+ Return (0x02)
+ }
+ If (LEqual (Arg2, 0x02)) {
+ // I2C 0:bit31-24:BUS. 23-16:Speed.15-8:Addr. 0-7:Function
+ Return (0x02001000) // SENSOR
+ }
+ If (LEqual (Arg2, 0x03)) {
+ // I2C 0:bit31-24:BUS. 23-16:Speed.15-8:Addr. 0-7:Function
+ Return (0x02000E01) // VCM
+ }
+ }
+
+ Return(Zero)
+ }
+ }
+} // Scope(\_SB.PCI0.I2C2)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_INT3474.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_INT3474.asl new file mode 100644 index 0000000000..b3c6be7a24 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_INT3474.asl @@ -0,0 +1,196 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0.I2C0)
+{
+ Device(PMC0)
+ {
+ Name(_ADR, Zero)
+ Name(_HID, "INT3472")
+ Name(_CID, "INT3472")
+ Name(_DDN, "INCL-CRDD")
+ Name(_UID, "1")
+
+ Method(_CRS, 0x0, Serialized)
+ {
+ Name(SBUF, ResourceTemplate()
+ {
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,)
+ { // Pin list
+ 0x35 // GPIO_65
+ }
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,)
+ { // Pin list
+ 0x3B // GPIO_71
+ }
+ })
+ Return (SBUF)
+ }
+
+ Method(_STA, 0, NotSerialized) // _STA: Status
+ {
+ If (LEqual (UCAS, 1)) { // 1-OV2740
+ Return (0x0F)
+ } else {
+ Return (0x0)
+ }
+ }
+ Method(CLDB, 0, Serialized)
+ {
+ Name(PAR, Buffer(0x20)
+ {
+ 0x00, //Version
+ 0x01, //Control logic Type 0: UNKNOWN 1: DISCRETE 2: PMIC TPS68470 3: PMIC uP6641
+ 0x01, //Control logic ID: Control Logic 1
+ 0x70, //CRD board Type, 0: UNKNOWN 0x20: CRD-D 0x30: CRD-G 0x40: PPV 0x50: CRD-G2 0x70: CRD_G_BXT
+ 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ })
+ Return (PAR)
+ }
+
+ Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
+ {
+ If (LEqual (Arg0, ToUUID("79234640-9E10-4FEA-A5C1-B5AA8B19756F"))) {
+ If (LEqual (Arg2, One)) {
+ Return (0x02) // number
+ }
+ If (LEqual (Arg2, 0x02)) {
+ Return (0x01004100) // RESET
+ }
+ If (LEqual (Arg2, 0x03)) {
+ Return (0x01004701) // POWER DOWN
+ }
+ }
+ Return (Zero)
+ }
+ }
+
+ Device(CAM0)
+ {
+ Name(_ADR, Zero)
+ Name(_HID, "INT3474")
+ Name(_CID, "INT3474")
+ Name(_SUB, "INTL0000")
+ Name(_DDN, "OV2740")
+ Name(_UID, One)
+
+ Name (_DEP, Package () // _DEP: Dependencies
+ {
+ \_SB.PCI0.I2C0.PMC0
+ })
+
+ Name(PLDB, Package(1)
+ {
+ Buffer(0x14)
+ {
+ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x61, 0x0C, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Method(_PLD, 0, Serialized)
+ {
+ CreateField(DerefOf(Index(PLDB,0)), 115, 4, RPOS) // Rotation field
+ Store(CROT, RPOS)
+
+ Return(PLDB)
+ }
+
+ Method(_STA, 0, NotSerialized)
+ {
+ If (LEqual (UCAS, 1)) { // 1-OV2740
+ Return (0x0F)
+ } else {
+ Return (0x0)
+ }
+ }
+ Method(SSDB, 0, Serialized)
+ {
+ Name(PAR, Buffer(0x6C)
+ {
+ 0x00, //Version
+ 0x70, //SKU: CRD_G_BXT
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, //GUID for CSI2 host controller
+ 0x00, //DevFunction
+ 0x00, //Bus
+ 0x00, 0x00, 0x00, 0x00, //DphyLinkEnFuses
+ 0x00, 0x00, 0x00, 0x00, //ClockDiv
+ 0x02, //LinkUsed
+ 0x02, //LaneUsed
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_CLANE
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_CLANE
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE0
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE0
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE1
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE1
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE2
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE2
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE3
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE3
+ 0x00, 0x00, 0x00, 0x00, //MaxLaneSpeed
+ 0x00, //SensorCalibrationFileIdx
+ 0x00, 0x00, 0x00, //SensorCalibrationFileIdxInMBZ
+ 0x00, //RomType: NONE
+ 0x00, //VcmType: none
+ 0x08, //Platform info BXT
+ 0x00, //Platform sub info
+ 0x02, //Flash none
+ 0x00, //Privacy LED not supported
+ 0x00, //0 degree
+ 0x01, //MIPI link/lane defined in ACPI
+ 0x00, 0xF8, 0x24, 0x01, // MCLK: 19200000Hz
+ 0x01, //Control logic ID
+ 0x00, 0x00, 0x00,
+ 0x01, // M_CLK
+ 0x00, 0x00, 0x00, //Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, //Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, //Reserved
+ })
+ Return (PAR)
+ }
+
+ Method(_CRS, 0, Serialized)
+ {
+ Name(SBUF, ResourceTemplate()
+ {
+ I2CSerialBus(0x0036, ControllerInitiated, 0x00061A80, AddressingMode7Bit,
+ "\\_SB.PCI0.I2C0", 0x00, ResourceConsumer,,)
+ })
+ Return(SBUF)
+ }
+
+ Method(_DSM, 4, NotSerialized)
+ {
+ If (LEqual(Arg0, ToUUID("822ACE8F-2814-4174-A56B-5F029FE079EE"))) {
+ Return("4SF259T2")
+ }
+ If (LEqual(Arg0, ToUUID("26257549-9271-4CA4-BB43-C4899D5A4881"))) {
+ If (LEqual(Arg2, One)) {
+ Return(One)
+ }
+ If (LEqual(Arg2, 0x02)) {
+ // I2C 0:bit31-24:BUS. 23-16:Speed.15-8:Addr. 0-7:Function
+ Return(0x00003600) // SENSOR
+ }
+ }
+ Return(Zero)
+ }
+ }
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony214A.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony214A.asl new file mode 100644 index 0000000000..721e867b8b --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony214A.asl @@ -0,0 +1,188 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0.I2C2)
+{
+ Device (PMC2) {
+ Name (_ADR, Zero)
+ Name (_HID, "INT3472")
+ Name (_CID, "INT3472")
+ Name (_DDN, "INCL-CRDD")
+ Name (_UID, "0")
+
+ Method (_CRS, 0x0, Serialized) {
+ Name (SBUF, ResourceTemplate() {
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,) {
+ 0x37 // GPIO_67
+ }
+
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,) {
+ 0x3C // GPIO_72
+ }
+ })
+ Return (SBUF)
+ }
+
+ Method (_STA, 0, NotSerialized) {
+ If (LEqual (WCAS, 1)) { // 1-IMX214
+ Return (0x0F)
+ }
+ Return (0x0)
+ }
+
+ Method (CLDB, 0, Serialized) {
+ Name (PAR, Buffer(0x20) {
+ 0x00, //Version
+ 0x01, //Control logic Type 0: UNKNOWN 1: DISCRETE 2: PMIC TPS68470 3: PMIC uP6641
+ 0x00, //Control logic ID: Control Logic 0
+ 0x70, //CRD board Type, 0: UNKNOWN 0x20: CRD-D 0x30: CRD-G 0x40: PPV 0x50: CRD-G2 0x70: CRD_G_BXT
+ 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+ })
+ Return (PAR)
+ }
+
+ Method (_DSM, 4, NotSerialized) {
+ If (LEqual (Arg0, ToUUID("79234640-9E10-4FEA-A5C1-B5AA8B19756F"))) {
+ If (LEqual (Arg2, One)) {
+ Return (0x02) // number
+ }
+ If (LEqual (Arg2, 0x02)) {
+ Return (0x01004300) // RESET
+ }
+ If (LEqual (Arg2, 0x03)) {
+ Return (0x01004801) // POWER DOWN
+ }
+ }
+ Return (Zero)
+ }
+ }
+
+ //
+ // Rear Camera IMX214A
+ //
+ Device (CAM2) {
+ Name (_ADR, Zero)
+ Name (_HID, "SONY214A")
+ Name (_CID, "SONY214A")
+ Name (_SUB, "INTL0000")
+ Name (_DDN, "SONY IMX214")
+ Name (_UID, One)
+
+ Name (_DEP, Package () {
+ \_SB.PCI0.I2C2.PMC2
+ })
+
+ Name (PLDB, Package(1) {
+ Buffer(0x14)
+ {
+ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x69, 0x0C, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+ Method (_PLD, 0, Serialized) {
+ CreateField(DerefOf(Index(PLDB,0)), 115, 4, RPOS) // Rotation field
+ Store(CROT, RPOS)
+
+ Return(PLDB)
+ }
+
+ Method (_STA, 0, NotSerialized) {
+ If (LEqual (WCAS, 1)) { // 1-IMX214
+ Return (0x0F)
+ }
+ Return (0x0)
+ }
+
+ Method (SSDB, 0, Serialized) {
+ Name (PAR, Buffer(0x6C) {
+ 0x00, //Version
+ 0x70, //SKU: CRD_G_BXT
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, //GUID for CSI2 host controller
+ 0x00, //DevFunction
+ 0x00, //Bus
+ 0x00, 0x00, 0x00, 0x00, //DphyLinkEnFuses
+ 0x00, 0x00, 0x00, 0x00, //ClockDiv
+ 0x06, //LinkUsed
+ 0x04, //LaneUsed
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_CLANE
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_CLANE
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE0
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE0
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE1
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE1
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE2
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE2
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_TERMEN_DLANE3
+ 0x00, 0x00, 0x00, 0x00, //CSI_RX_DLY_CNT_SETTLE_DLANE3
+ 0x00, 0x00, 0x00, 0x00, //MaxLaneSpeed
+ 0x00, //SensorCalibrationFileIdx
+ 0x00, 0x00, 0x00, //SensorCalibrationFileIdxInMBZ
+ 0x00, //RomType: NONE
+ 0x02, //VcmType: DW9714A
+ 0x08, //Platform info BXT
+ 0x00, //Platform sub info
+ 0x03, //Flash ENABLED
+ 0x00, //Privacy LED not supported
+ 0x00, //0 degree
+ 0x01, //MIPI link/lane defined in ACPI
+ 0x00, 0xF8, 0x24, 0x01, // MCLK: 19200000Hz
+ 0x00, //Control logic ID
+ 0x00, 0x00, 0x00,
+ 0x02, // M_CLK Port
+ 0x00, 0x00, 0x00, //Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, //Reserved
+ 0x00, 0x00, 0x00, 0x00, 0x00, //Reserved
+ })
+ Return (PAR)
+ }
+
+ Method (_CRS, 0, Serialized) {
+ Name (SBUF, ResourceTemplate() {
+ I2CSerialBus(0x001A, ControllerInitiated, 0x00061A80, AddressingMode7Bit,
+ "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer,,)
+ I2CSerialBus(0x000C, ControllerInitiated, 0x00061A80, AddressingMode7Bit,
+ "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer,,)
+ })
+ Return(SBUF)
+ }
+
+ Method (_DSM, 4, NotSerialized)
+ {
+ If (LEqual (Arg0, ToUUID ("822ACE8F-2814-4174-A56B-5F029FE079EE"))) {
+ Return("P13N05BA")
+ }
+
+ If (LEqual (Arg0, ToUUID ("26257549-9271-4CA4-BB43-C4899D5A4881"))) {
+ If (LEqual (Arg2, One)) {
+ Return (0x02)
+ }
+ If (LEqual (Arg2, 0x02)) {
+ // I2C 0:bit31-24:BUS. 23-16:Speed.15-8:Addr. 0-7:Function
+ Return (0x02001A00) // SENSOR
+ }
+ If (LEqual (Arg2, 0x03)) {
+ // I2C 0:bit31-24:BUS. 23-16:Speed.15-8:Addr. 0-7:Function
+ Return (0x02000C01) // VCM
+ }
+ }
+ Return(Zero)
+ }
+ }
+} // Scope(\_SB.PCI0.I2C2)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Flash_TPS61311.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Flash_TPS61311.asl new file mode 100644 index 0000000000..b16fff32ab --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Flash_TPS61311.asl @@ -0,0 +1,93 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope (\_SB.PCI0.I2C2)
+{
+ Device (STRB)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ Name (_HID, "INT3481") // _HID: Hardware ID
+ Name (_CID, "INT3481") // _CID: Compatible ID
+ Name (_SUB, "INTL0000") // _SUB: Subsystem ID
+ Name (_DDN, "Flash TPS61311") // _DDN: DOS Device Name
+ Name (_UID, Zero) // _UID: Unique ID
+ Name (PLDB, Package (0x01)
+ {
+ Buffer (0x14)
+ {
+ /* 0000 */ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ........ */
+ /* 0008 */ 0x69, 0x0C, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, /* i....... */
+ /* 0010 */ 0xFF, 0xFF, 0xFF, 0xFF /* .... */
+ }
+ })
+
+ Method (_PLD, 0, Serialized) // _PLD: Physical Location of Device
+ {
+ Return (PLDB) /* \_SB_.PCI0.I2C2.STRB.PLDB */
+ }
+
+ Method (_STA, 0, NotSerialized) // _STA: Status
+ {
+ Return (0x0F)
+ }
+
+ Method (_CRS, 0, Serialized) // _CRS: Current Resource Settings
+ {
+ Name (SBUF, ResourceTemplate ()
+ {
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,
+ )
+ { // Pin list
+ 0x0036
+ }
+ I2cSerialBus (0x0033, ControllerInitiated, 0x00061A80,
+ AddressingMode7Bit, "\\_SB.PCI0.I2C2",
+ 0x00, ResourceConsumer, ,
+ )
+ })
+ Return (SBUF) /* \_SB_.PCI0.I2C2.STRB._CRS.SBUF */
+ }
+
+ Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
+ {
+ If (LEqual(Arg0,ToUUID ("377ba76a-f390-4aff-ab38-9b1bf33a3015"))) {
+ Return ("INT3481")
+ }
+ If (LEqual(Arg0,ToUUID ("3c62aaaa-d8e0-401a-84c3-fc05656fa28c"))) {
+ Return ("TPS61311")
+ }
+ If (LEqual(Arg0,ToUUID ("2959512a-028c-4646-b73d-4d1b5672fad8"))) {
+ Return ("BXT")
+ }
+ If (LEqual(Arg0,ToUUID ("26257549-9271-4ca4-bb43-c4899d5a4881"))) {
+ If (LEqual(Arg2,One)) {
+ Return (One)
+ }
+ If (LEqual(Arg2,0x02)) {
+ Return (0x02003300)
+ }
+ }
+ If (LEqual(Arg0,ToUUID ("79234640-9e10-4fea-a5c1-b5aa8b19756f"))) {
+ If (LEqual(Arg2,One)) {
+ Return (One)
+ }
+ If (LEqual(Arg2,0x02)) {
+ Return (0x01003604)
+ }
+ }
+ Return (Zero)
+ }
+ }
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Fingerprint/Fingerprint_FPC.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Fingerprint/Fingerprint_FPC.asl new file mode 100644 index 0000000000..03d73f2d9c --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Fingerprint/Fingerprint_FPC.asl @@ -0,0 +1,50 @@ +/** @file
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\SDS1, IntObj)
+
+//-----------------------------
+// Serial IO SPI1 Controller
+//-----------------------------
+Scope(\_SB.PCI0.SPI1)
+{
+ Device(FPNT) {
+ Method(_HID) {
+ //
+ // Return FPS HID based on BIOS Setup
+ //
+ if (LEqual(SDS1, 1)) {Return ("FPC1020")}
+ if (LEqual(SDS1, 2)) {Return ("FPC1021")}
+ Return ("FPNT_DIS")
+ }
+
+ Method(_STA) {
+ //
+ // Is SerialIo SPI1 FPS enabled in BIOS Setup?
+ //
+ If (LNotEqual(SDS1, 0)) {
+ Return (0x0F)
+ }
+ Return (0x00)
+ }
+ Method(_CRS, 0x0, Serialized) {
+ Name(BBUF,ResourceTemplate () {
+ SPISerialBus(0x00,PolarityLow,FourWireMode,8,ControllerInitiated,3000000,ClockPolarityLow,ClockPhaseFirst,"\\_SB.PCI0.SPI1",,,SPIR)
+ GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO1",,,GSLP) {67} //North-west(67):GPIO_112 FGR_RESET_N
+ GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullDefault, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer,GINT ) {14} //North(14):GPIO_14 : FGR_INT
+ })
+ Return (BBUF)
+ }
+ } // Device (FPNT)
+} // end Scope(\_SB.PCI0.SPI1)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Gps/Gps.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Gps/Gps.asl new file mode 100644 index 0000000000..f011d8e016 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Gps/Gps.asl @@ -0,0 +1,56 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\GSBC, IntObj)
+
+Scope(\_SB.PCI0.URT2)
+{
+ Device(GPS1)//GPS for Windows OS.
+ {
+ Name(_HID, "BCM4752") //Vendor: test GPS device for BYT
+ Name(_HRV, 0x0001)
+
+ Method(_STA, 0x0, NotSerialized)
+ {
+ If (LEqual (GSBC, 1)) {
+ Return (0xF)
+ }
+ Return (0)
+ }
+
+ Method(_CRS, 0x0, Serialized)
+ {
+ // UARTSerial Bus Connection Descriptor
+ Name(BBUF, ResourceTemplate () {
+ UARTSerialBus(
+ 115200, // InitialBaudRate: in bits ber second
+ , // BitsPerByte: default to 8 bits
+ , // StopBits: Defaults to one bit
+ 0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
+ , // IsBigEndian: default to LittleEndian
+ , // Parity: Defaults to no parity
+ FlowControlHardware, // FlowControl: Defaults to no flow control
+ 32, // ReceiveBufferSize
+ 32, // TransmitBufferSize
+ "\\_SB.PCI0.URT2", // ResourceSource: UART bus controller name
+ ,) // DescriptorName: creates name for offset of resource descriptor
+ //
+ //Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, , , ) {62} // GPS_HOSTREQ IRQ - 62
+ GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO1", ) {36} // GNSS_UART_WAKE_N
+ })
+ Return (BBUF)
+ }
+
+ } // Device GPS1
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Irmt.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Irmt.asl new file mode 100644 index 0000000000..c68e66467c --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Irmt.asl @@ -0,0 +1,99 @@ +/** @file
+ ACPI interface for Intel Ready Mode Technology(IRMT)
+
+ Copyright (c) 2014 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+DefinitionBlock (
+ "IrmtAcpi.aml",
+ "SSDT",
+ 2,
+ "Intel_",
+ "IrmtTabl",
+ 0x1000
+ )
+{
+ External(IRMC) // Irmt Configuration
+ External(\_SB.PCI0.GFX0.TCHE) // Technology enabled indicator
+ External(\_SB.PCI0.GFX0.STAT) // State Indicator
+
+ Scope (\_SB) {
+ Device (AOAA) {
+ Name (_HID, "INT3398")
+
+ Name (NSMD, 0x00) // Used to store mode settings:
+ /**
+ Bits Description
+ - (1:0) 00: Leave Never Sleep Mode;
+ 01: Enter Never Sleep Mode.
+ 10: Power Reduction Mode
+ 11: Enter Do Not Disturb mode.
+ - (7:2) Reserved: Set to 0.
+ **/
+
+ Method (_STA, 0)
+ {
+ //
+ //The Intel RMT ACPI device is a hidden device and
+ //listed under system devices on Device Manager.
+ //
+ Return (0x0B)
+ }
+
+ /**
+ GNSC - Get Never Sleep Configuration
+ Input: None
+ Return:
+ Bits Description
+ - 0 State(Never Sleep Enabling Status in BIOS): 0 = Disabled, 1 = Enabled
+ - 1 Notification(Hardware notification enabling status): 0 = Unsupported, 1 = Supported
+ - (7:2) Reserved: Set to 0.
+ **/
+ Method (GNSC, 0, NotSerialized, 0, IntObj) {
+ Return (IRMC)
+ }
+
+ /**
+ GNSM - Get Never Sleep Mode
+ Input: None
+ Return:
+ Bits Description
+ - (1:0) 00: Leave Never Sleep Mode;
+ 01: Enter Never Sleep Mode.
+ 10: Power Reduction Mode
+ 11: Enter Do Not Disturb mode.
+ - (7:2) Reserved: Set to 0.
+ **/
+ Method (GNSM, 0, NotSerialized, 0, IntObj) {
+ Return (NSMD)
+ }
+
+ /**
+ SNSM - Set Never Sleep Mode
+ Input:
+ Bits Description
+ - (1:0) 00: Leave Never Sleep Mode;
+ 01: Enter Never Sleep Mode.
+ 10: Power Reduction Mode
+ 11: Enter Do Not Disturb mode.
+ - (7:2) Reserved: Set to 0.
+ Return:
+ **/
+ Method (SNSM, 1, NotSerialized, 0, UnknownObj, IntObj) {
+ And(Arg0, 0x3, NSMD)
+ }
+
+ } // Device (AOAA)
+ } // Scope (\_SB)
+} // End SSDT
+
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Nfc/Nfc.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Nfc/Nfc.asl new file mode 100644 index 0000000000..cd0f383da8 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Nfc/Nfc.asl @@ -0,0 +1,70 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+/*
+NXP NPC100 non-secure NFC
+* I2C 1(0 based)
+* Slave address: 0x29
+* IRQ : GPIO_20, direct IRQ, level high
+* Reset : GPIO_150, output
+* Fw update : GPIO_27, output
+*/
+External(\NFCN, IntObj)
+
+Scope (\_SB.PCI0.I2C1)
+{
+ Device (NFC1)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ Name (_HID, EISAID("NXP1001")) // _HID: Hardware ID
+ Name (_DDN, "NXP NPC100") // _DDN: DOS Device Name
+ Name (_UID, One) // _UID: Unique ID
+
+ Method (_CRS, 0, Serialized) // _CRS: Current Resource Settings
+ {
+ Name (SBUF, ResourceTemplate ()
+ {
+ I2cSerialBus (0x29, ControllerInitiated, 0x00061A80,
+ AddressingMode7Bit, "\\_SB.PCI0.I2C1",
+ 0x00, ResourceConsumer, ,
+ )
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, ,, )
+ {
+ 0x00000077, // GPIO_20
+ }
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,
+ )
+ { // Pin list, GPIO_27
+ 0x001B
+ }
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO2", 0x00, ResourceConsumer, ,
+ )
+ { // Pin list, GPIO_150
+ 0x0014
+ }
+ })
+ Return (SBUF)
+ }
+
+ Method (_STA, 0, NotSerialized) // _STA: Status
+ {
+ If (LEqual (NFCN, 1)) {
+ Return (0xF)
+ }
+ Return (0)
+ }
+ } // Device (NFC1)
+} // Scope (\_SB.PCI0.I2C1)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PSS/MonzaX2K_IMPJ0003.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PSS/MonzaX2K_IMPJ0003.asl new file mode 100644 index 0000000000..c821139205 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PSS/MonzaX2K_IMPJ0003.asl @@ -0,0 +1,51 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\PSSI, IntObj)
+
+Scope(\_SB.PCI0.I2C7){
+//------------------------
+// PSS on I2C7
+//------------------------
+/*
+PSS: Monza_X-2K_Dura
+* GPIO: None
+* I2C bus: I2C 7 (0 based)
+* I2C slave address: 0x6E
+* I2C frequency: 400K
+* ACPI ID: IMPJ0003
+*/
+ Device (IMP3)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ Name (_HID, "IMPJ0003") // _HID: Hardware ID
+ Name (_CID, "IMPJ0003") // _CID: Compatible ID
+ Name (_UID, One) // _UID: Unique ID
+
+ Method(_STA, 0x0, NotSerialized) {
+ If (LEqual (PSSI, 1)) {
+ Return (0xF)
+ }
+ Return (0)
+ }
+
+ Method (_CRS, 0, Serialized) {
+ Name (SBUF, ResourceTemplate () {
+ I2cSerialBus (0x6E,ControllerInitiated,400000,AddressingMode7Bit,"\\_SB.PCI0.I2C7",0x00,ResourceConsumer,,)
+ })
+ Return (SBUF)
+ }
+
+ } // Device (IMP3)
+} //Scope(\_SB.PCI0.I2C7)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl new file mode 100644 index 0000000000..fd7feddf75 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl @@ -0,0 +1,71 @@ +/** @file
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+DefinitionBlock (
+ "PlatformSsdt.aml",
+ "SSDT",
+ 1,
+ "Intel_",
+ "PlatformTable",
+ 0x1000
+ )
+{
+ External(\_SB.PCI0.I2C0, DeviceObj)
+ External(\_SB.PCI0.I2C1, DeviceObj)
+ External(\_SB.PCI0.I2C2, DeviceObj)
+ External(\_SB.PCI0.I2C3, DeviceObj)
+ External(\_SB.PCI0.I2C4, DeviceObj)
+ External(\_SB.PCI0.I2C7, DeviceObj)
+ External(\_SB.PCI0.URT1, DeviceObj)
+ External(\_SB.PCI0.URT2, DeviceObj)
+ External(\_SB.PCI0.SDIO, DeviceObj)
+ External(\_SB.PCI0.SPI1, DeviceObj)
+ External(\_SB.GPO0.CWLE, IntObj)
+ External(\_SB.GPO0.AVBL, IntObj)
+ External(\_SB.PCI0.SDIO.PSTS, IntObj)
+ External(HIDG, MethodObj)
+ External(OSYS, IntObj)
+ External(SBTD, IntObj)
+ External(WCAS, IntObj)
+ External(UCAS, IntObj)
+ External(CROT, IntObj)
+ External(TP7G)
+ External(IPUD)
+
+ include ("Audio/AudioCodec_INT34C1.asl")
+ include ("Audio/AudioCodec_INT343A.asl")
+
+ If (LEqual(IPUD, 1)) {
+ include ("Camera/Camera_INT3471.asl")
+ include ("Camera/Camera_INT3474.asl")
+ include ("Camera/Camera_Sony214A.asl")
+ include ("Camera/Flash_TPS61311.asl")
+ }
+
+ include ("Touch/TouchPanel_I2C3.asl")
+ include ("Touch/TouchPads_I2C4.asl")
+
+ include ("PSS/MonzaX2K_IMPJ0003.asl")
+
+ include ("Bluetooth/Bluetooth_BCM2E40.asl")
+
+ include ("Wifi/WIFI_Broadcom1.asl")
+ include ("Wifi/WIFI_Broadcom2.asl")
+
+ include ("Gps/Gps.asl")
+
+ include ("Nfc/Nfc.asl")
+
+ include ("Fingerprint/Fingerprint_FPC.asl")
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.inf b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.inf new file mode 100644 index 0000000000..96a8ded34e --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.inf @@ -0,0 +1,31 @@ +## @file
+# Component description file for PlatformAcpiTable module.
+#
+# Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PlatformSsdt
+ FILE_GUID = 8041F38B-0A34-49D7-A905-03AEEF4826F7
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+ EDK_RELEASE_VERSION = 0x00020000
+ EFI_SPECIFICATION_VERSION = 0x00020000
+
+[sources]
+ Irmt.asl
+ PlatformSsdt.asl
+
+[Packages]
+ MdePkg/MdePkg.dec
+ BroxtonSiPkg/BroxtonSiPkg.dec
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Touch/TouchPads_I2C4.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Touch/TouchPads_I2C4.asl new file mode 100644 index 0000000000..9094e3ab7b --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Touch/TouchPads_I2C4.asl @@ -0,0 +1,115 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\TCPD, IntObj)
+
+Scope(\_SB.PCI0.I2C4) {
+//------------------------
+// Touch Pads on I2C4
+// Note: instead of adding more touch devices, parametrize this one with appropriate _HID value and GPIO numbers
+// GPIO_18:TCHPAD_INT_N North West Community, IRQ number 0x75.
+//------------------------
+
+ Device(TPD0)
+ {
+ Name(_ADR, One)
+ Name(_HID, "ALPS0001")
+ Name(_CID, "PNP0C50")
+ Name(_UID, One)
+ Name(_S0W, 4) // required to put the device to D3 Cold during S0 idle
+ Name (SBFB, ResourceTemplate () {
+ I2cSerialBus (
+ 0x2C,
+ ControllerInitiated,
+ 400000,
+ AddressingMode7Bit,
+ "\\_SB.PCI0.I2C4",
+ 0x00,
+ ResourceConsumer,
+ ,
+ )
+ })
+ Name (SBFG, ResourceTemplate () {
+ GpioInt (Level, ActiveLow, Exclusive, PullDefault, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer, ,)
+ { // Pin list
+ 0x0012
+ }
+ })
+ Name (SBFI, ResourceTemplate () {
+ Interrupt(ResourceConsumer, Level, ActiveLow, ExclusiveAndWake,,,)
+ {
+ 0x75,
+ }
+ })
+ Method (_INI, 0, NotSerialized)
+ {
+ }
+ Method (_STA, 0, NotSerialized)
+ {
+ If (LEqual (TCPD, 1)) {
+ Return (0x0F)
+ }
+ Return (0x00)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ If (LLess (OSYS, 2012)) {
+ Return (SBFI)
+ }
+ Return (ConcatenateResTemplate (SBFB, SBFI))
+ }
+ Method(_DSM, 0x4, NotSerialized)
+ {
+ // DSM UUID for HIDI2C. Do Not change.
+ If (LEqual(Arg0, ToUUID("3CDFF6F7-4267-4555-AD05-B30A3D8938DE"))) {
+ // Function 0 : Query Function
+ If (LEqual(Arg2, Zero)) {
+ // Revision 1
+ If (LEqual(Arg1, One)) {
+ Return (Buffer (One) {0x03})
+ }
+ Else
+ {
+ Return (Buffer (One) {0x00})
+ }
+ } ElseIf (LEqual(Arg2, One)) { // Function 1 : HID Function
+ // HID Descriptor Address (IHV Specific)
+ Return(0x0020)
+ } Else {
+ Return (Buffer (One) {0x00})
+ }
+ }
+ Else
+ {
+ If (LEqual(Arg0, ToUUID("EF87EB82-F951-46DA-84EC-14871AC6F84B"))) {
+ If (LEqual (Arg2, Zero)) {
+ If (LEqual (Arg1, One)) {
+ Return (Buffer (One) {0x03})
+ }
+ }
+
+ If (LEqual (Arg2, One)) {
+ Return (ConcatenateResTemplate (SBFB, SBFG))
+ }
+
+ Return (Buffer (One) {0x00})
+ }
+ Else
+ {
+ Return (Buffer (One) {0x00})
+ }
+ }
+ }
+ }
+} //Scope(\_SB.PCI0.I2C4)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Touch/TouchPanel_I2C3.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Touch/TouchPanel_I2C3.asl new file mode 100644 index 0000000000..07196c0606 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Touch/TouchPanel_I2C3.asl @@ -0,0 +1,142 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\TCPL, IntObj)
+
+Scope(\_SB.PCI0.I2C3) {
+//------------------------
+// Touch Panels on I2C3
+// Note: instead of adding more touch panels, parametrize this one with appropriate _HID value and GPIO numbers
+// GPIO_21:TCH_PNL_INTR_LS_N North Community, IRQ number 0x32.
+//------------------------
+ Device (TPL1) {
+ Name (HID2, Zero)
+ Name (_HID, "ELAN221D") // _HID: Hardware ID
+ Name (_CID, "PNP0C50") // _CID: Compatible ID
+ Name (_S0W, 0x04) // _S0W: S0 Device Wake State
+ Name (SBFB, ResourceTemplate () {
+ I2cSerialBus (
+ 0x0010,
+ ControllerInitiated,
+ 400000,
+ AddressingMode7Bit,
+ "\\_SB.PCI0.I2C3",
+ 0x00,
+ ResourceConsumer,
+ ,
+ )
+ })
+ Name (SBFG, ResourceTemplate () {
+ GpioInt (Level, ActiveLow, Exclusive, PullDefault, 0x0000,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,
+ )
+ { // Pin list
+ 0x0015
+ }
+ })
+ Name (SBFI, ResourceTemplate () {
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, )
+ {
+ 0x32,
+ }
+ })
+
+ Method (_INI, 0, NotSerialized) // _INI: Initialize
+ {
+ }
+
+ Method (_STA, 0, NotSerialized) // _STA: Status
+ {
+ If (LEqual (TCPL, 1)) {
+ Return (0x0F)
+ }
+ Return (0x00)
+ }
+
+ Method (_CRS, 0, NotSerialized) {
+ If (LLess (OSYS,2012)) {
+ // For Windows 7 only report Interrupt; it doesn't support ACPI5.0 and wouldn't understand GpioInt nor I2cBus
+ return (SBFI)
+ }
+ Return (ConcatenateResTemplate(SBFB, SBFI))
+ }
+
+ Method(_DSM, 0x4, Serialized){
+ Store ("Method _DSM begin", Debug)
+ If (LEqual(Arg0, ToUUID("3CDFF6F7-4267-4555-AD05-B30A3D8938DE"))) {
+ // DSM Function
+ switch(ToInteger(Arg2))
+ {
+ // Function 0: Query function, return based on revision
+ case(0)
+ {
+ // DSM Revision
+ switch(ToInteger(Arg1))
+ {
+ // Revision 1: Function 1 supported
+ case(1)
+ {
+ Store ("Method _DSM Function Query", Debug)
+ Return(Buffer(One) { 0x03 })
+ }
+
+ default
+ {
+ // Revision 2+: no functions supported
+ Return(Buffer(One) { 0x00 })
+ }
+ }
+ }
+
+ // Function 1 : HID Function
+ case(1)
+ {
+ Store ("Method _DSM Function HID", Debug)
+ // HID Descriptor Address
+ Return(0x0001)
+ }
+
+ default
+ {
+ // Functions 2+: not supported
+ Return(0x0000)
+ }
+ }
+ }
+ Elseif(LEqual(Arg0, ToUUID("EF87EB82-F951-46DA-84EC-14871AC6F84B")))
+ { // Windows 7 Resources DSM (Intel specific)
+
+ // Function 0 : Query Function
+ If (LEqual(Arg2, Zero)) {
+ // Revision 1
+ If (LEqual(Arg1, One)) {
+ Return(Buffer(One) { 0x03 })
+ }
+ }
+ // Function 1 : I2CSerialBus(...) and GpioInt(...) resources
+ If (LEqual(Arg2, One)) {
+ Return (ConcatenateResTemplate(SBFB, SBFG))
+ }
+
+ Return(Buffer(One) { 0x00 })
+ }
+ else
+ {
+ // No other GUIDs supported
+ Return(Buffer(One) { 0x00 })
+ }
+ }
+
+ } // Device (TPL0)
+} //Scope(\_SB.PCI0.I2C3)
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Wifi/WIFI_Broadcom1.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Wifi/WIFI_Broadcom1.asl new file mode 100644 index 0000000000..8a48108e36 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Wifi/WIFI_Broadcom1.asl @@ -0,0 +1,68 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+/*
+ GPIO_10 for Wi-Fi direct IRQ 0x6D.
+ GPIO_15 for Wi-Fi reset
+ PMIC_STDBY for Wi-Fi disable, NW index 30
+*/
+
+
+Scope(\_SB.PCI0.SDIO)
+{
+ Device (BRCM)
+ {
+ Name (_ADR, One) // _ADR: Address
+ Name (_DEP, Package() {\_SB.GPO0})
+ Name (_S4W, 2)
+ Name (_S0W, 2)
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0xF)
+ }
+
+ Method (_RMV, 0, NotSerialized)
+ {
+ Return (Zero)
+ }
+
+ Name (_PRW, Package (0x02)
+ {
+ Zero,
+ Zero
+ })
+
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RBUF, ResourceTemplate ()
+ {
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, , , ) {0x6D} // GPIO_10 to IOAPIC IRQ 0x6D
+ })
+ Return (RBUF)
+ }
+
+ Method (_PS3, 0, NotSerialized)
+ {
+ Store( 0x00, \_SB.GPO0.CWLE ) // Put WiFi chip in Reset
+ Sleep(150)
+ }
+
+ Method (_PS0, 0, NotSerialized)
+ {
+ Store( 0x01, \_SB.GPO0.CWLE ) // Take WiFi chip out in Reset
+ Sleep(150)
+ }
+ }
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Wifi/WIFI_Broadcom2.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Wifi/WIFI_Broadcom2.asl new file mode 100644 index 0000000000..52db361659 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Wifi/WIFI_Broadcom2.asl @@ -0,0 +1,49 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0.SDIO)
+{
+ Device (BRC2)
+ {
+ Name (_ADR, 0x02)
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0xF)
+ }
+
+ Method (_RMV, 0, NotSerialized)
+ {
+ Return (Zero)
+ }
+
+ Method (_CRS, 0, Serialized)
+ {
+ Name (NAM, Buffer ()
+ { // 20
+ "\\_SB.PCI0.SDIO.BRCM"
+ })
+ Name (SPB, Buffer ()
+ {
+ /* 0000 */ 0x8E, 0x1D, 0x00, 0x01, 0x00, 0xC0, 0x02, 0x00,
+ /* 0008 */ 0x00, 0x01, 0x00, 0x00
+ })
+ Name(END, Buffer() {0x79, 0x00})
+
+ Concatenate (SPB, NAM, Local0)
+ Concatenate (Local0, END, Local1)
+ Return (Local1)
+ }
+ }
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Pram/Pram.aslc b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Pram/Pram.aslc new file mode 100644 index 0000000000..2d1425a636 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Pram/Pram.aslc @@ -0,0 +1,61 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// Statements that include other files
+//
+#include <Pram.h>
+
+//
+// MCFG Table definition
+//
+EFI_ACPI_PRAM_BASE_ADDRESS_TABLE PRAM = {
+ EFI_ACPI_PRAM_BASE_ADDRESS_TABLE_SIGNATURE,
+ sizeof (EFI_ACPI_PRAM_BASE_ADDRESS_TABLE),
+ EFI_ACPI_PRAM_BASE_ADDRESS_TABLE_REVISION,
+ //
+ // Checksum will be updated at runtime
+ //
+ 0x00,
+ //
+ // It is expected that these values will be programmed at runtime
+ //
+ ' ',
+ ' ',
+ ' ',
+ ' ',
+ ' ',
+ ' ',
+
+ 0,
+ EFI_ACPI_OEM_PRAM_REVISION,
+ 0,
+ 0,
+ //
+ // Beginning of PRAM specific fields
+ //
+ 0, //address
+ 0, //size
+};
+
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from
+ // removing the data structure from the executable
+ //
+ return (VOID*)&PRAM;
+}
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Sc.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Sc.asl new file mode 100644 index 0000000000..fed50b37bc --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Sc.asl @@ -0,0 +1,292 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Include ("GpioLib.asl")
+Scope(\)
+{
+ //
+ // Define ABASE I/O as an ACPI operating region. The base address
+ // can be found in Device 31, Registers 40-43h.
+ //
+ OperationRegion(PMIO, SystemIo, \PMBS, 0x46)
+ Field(PMIO, ByteAcc, NoLock, Preserve) {
+ , 8,
+ PWBS, 1, // Power Button Status
+ Offset(0x20),
+ , 13,
+ PMEB, 1, // PME_B0_STS
+ Offset(0x42), // General Purpose Control
+ , 1,
+ GPEC, 1
+ }
+ Field(PMIO, ByteAcc, NoLock, WriteAsZeros) {
+ Offset(0x20), // GPE0 Status
+ , 4,
+ PSCI, 1, // PUNIT SCI Status
+ SCIS, 1 // GUNIT SCI Status
+ }
+
+ //
+ // Define a Memory Region that will allow access to the PMC
+ // Register Block. Note that in the Intel Reference Solution, the PMC
+ // will get fixed up dynamically during POST.
+ //
+ OperationRegion(PMCR, SystemMemory, Add(DD1A,0x1000), 0x80) // PMC Space
+ Field(PMCR,DWordAcc,Lock,Preserve) {
+ Offset(0x34), // Function Disable Register
+ , 22,
+ RP2D, 1, // (22) Root Port 2 Disable
+ RP1D, 1, // (23) Root Port 1 Disable
+ Offset(0x38), // Function Disable Register 1
+ , 3,
+ RP3D, 1, // (03) Root Port 3 Disable
+ RP4D, 1, // (04) Root Port 4 Disable
+ RP5D, 1, // (05) Root Port 5 Disable
+ RP6D, 1, // (06) Root Port 6 Disable
+ }
+
+ //
+ // Support S0, S3, S4, and S5. The proper bits to be set when
+ // entering a given sleep state are found in the Power Management
+ // 1 Control ( PM1_CNT ) register, located at ACPIBASE + 04h,
+ // bits 10d - 12d.
+ //
+
+} //end Scope(\)
+
+scope (\_SB.PCI0) {
+ Name(LTRN, 0)
+ Name(OBFN, 0)
+
+ Name(LMSL, 0)
+ Name(LNSL, 0)
+
+ //
+ // LPC Bridge - Device 31, Function 0, this is only for PCH register Memory Region declare,
+ // it's better to be declared as early as possible since it's widely used in whole ACPI name space.
+ // Please add any code which needs to reference any register of it after this
+ //
+ Device(LPCB) {
+ Name(_ADR, 0x001F0000)
+
+ OperationRegion(LPC, PCI_Config, 0x00, 0x100)
+ Field(LPC, AnyAcc, NoLock, Preserve)
+ {
+ Offset(0x02),
+ CDID, 16,
+ Offset(0x08),
+ CRID, 8,
+ Offset(0x80),
+ IOD0, 8,
+ IOD1, 8,
+ Offset(0xA0),
+ , 9,
+ PRBL, 1,
+ Offset(0xAC),
+ , 8,
+ , 8,
+ XUSB, 1,
+ Offset(0xB8),
+ , 22,
+ GR0B, 2,
+ , 8,
+ Offset(0xBC),
+ , 2,
+ GR19, 2,
+ , 28,
+ }
+ }
+
+ //
+ // PCIE Root Port #01
+ //
+ Device(RP01) {
+ Method (_ADR, 0) {
+ If (LNotEqual(RPA1,0)) {
+ Return (RPA1)
+ } Else {
+ Return (0x00140000)
+ }
+ }
+ //
+ // Pass LTRx to LTRN so PchPcie.asl can be reused for PCIes.
+ //
+ Method(_INI)
+ {
+ Store (LTR1, LTRN)
+ Store (PML1, LMSL)
+ Store (PNL1, LNSL)
+ Store (OBF1, OBFN)
+ }
+ Include("ScPcie.asl")
+ Method(_PRW, 0) { Return(GPRW(0x09, 4)) } // can wakeup from S4 state
+ Method(_PRT, 0) {
+ If (PICM) { Return(AR04) }// APIC mode
+ Return (PR04) // PIC Mode
+ } // end _PRT
+ } // end "PCIE Root Port #01"
+
+ //
+ // PCIE Root Port #02
+ //
+ Device(RP02) {
+ Method (_ADR, 0) {
+ If (LNotEqual(RPA2,0)) {
+ Return (RPA2)
+ } Else {
+ Return (0x00140001)
+ }
+ }
+ //
+ // Pass LTRx to LTRN so PchPcie.asl can be reused for PCIes.
+ //
+ Method(_INI)
+ {
+ Store (LTR2, LTRN)
+ Store (PML2, LMSL)
+ Store (PNL2, LNSL)
+ Store (OBF2, OBFN)
+ }
+ Include("ScPcie.asl")
+ Method(_PRW, 0) { Return(GPRW(0x08, 4)) } //GPE enable bit for RP2 is 8, can wake up from S4 state
+ Method(_PRT, 0) {
+ If (PICM) { Return(AR05) }// APIC mode
+ Return (PR05) // PIC Mode
+ } // end _PRT
+ } // end "PCIE Root Port #02"
+
+ //
+ // PCIE Root Port #03
+ //
+ Device(RP03) {
+ Method (_ADR, 0) {
+ If (LNotEqual(RPA3,0)) {
+ Return (RPA3)
+ } Else {
+ Return (0x00130000)
+ }
+ }
+ //
+ // Pass LTRx to LTRN so PchPcie.asl can be reused for PCIes.
+ //
+ Method(_INI)
+ {
+ Store (LTR3, LTRN)
+ Store (PML3, LMSL)
+ Store (PNL3, LNSL)
+ Store (OBF3, OBFN)
+ }
+ Include("ScPcie.asl")
+ Method(_PRW, 0) { Return(GPRW(0x09, 4)) } // can wakeup from S4 state
+ Method(_PRT, 0) {
+ If (PICM) { Return(AR04) }// APIC mode
+ Return (PR04) // PIC Mode
+ } // end _PRT
+ } // end "PCIE Root Port #03"
+
+ //
+ // PCIE Root Port #04
+ //
+ Device(RP04) {
+ Method (_ADR, 0) {
+ If (LNotEqual(RPA4,0)) {
+ Return (RPA4)
+ } Else {
+ Return (0x00130001)
+ }
+ }
+ //
+ // Pass LTRx to LTRN so PchPcie.asl can be reused for PCIes.
+ //
+ Method(_INI)
+ {
+ Store (LTR4, LTRN)
+ Store (PML4, LMSL)
+ Store (PNL4, LNSL)
+ Store (OBF4, OBFN)
+ }
+ Include("ScPcie.asl")
+ Method(_PRW, 0) { Return(GPRW(0x09, 4)) } // can wakeup from S4 state
+ Method(_PRT, 0) {
+ If(PICM) { Return(AR05) }// APIC mode
+ Return (PR05) // PIC Mode
+ } // end _PRT
+ } // end "PCIE Root Port #04"
+
+ //
+ // PCIE Root Port #05
+ //
+ Device(RP05) {
+ Method (_ADR, 0) {
+ If (LNotEqual(RPA5,0)) {
+ Return (RPA5)
+ } Else {
+ Return (0x00130002)
+ }
+ }
+ //
+ // Pass LTRx to LTRN so PchPcie.asl can be reused for PCIes.
+ //
+ Method(_INI)
+ {
+ Store (LTR5, LTRN)
+ Store (PML5, LMSL)
+ Store (PNL5, LNSL)
+ Store (OBF5, OBFN)
+ }
+ Include("ScPcie.asl")
+ Method(_PRW, 0) { Return(GPRW(0x09, 4)) } // can wakeup from S4 state
+ Method(_PRT, 0) {
+ If (PICM) { Return(AR06) }// APIC mode
+ Return (PR06) // PIC Mode
+ } // end _PRT
+ } // end "PCIE Root Port #05"
+
+ //
+ // PCIE Root Port #06
+ //
+ Device(RP06) {
+ Method (_ADR, 0) {
+ If (LNotEqual(RPA6,0)) {
+ Return (RPA6)
+ } Else {
+ Return (0x00130003)
+ }
+ }
+ //
+ // Pass LTRx to LTRN so PchPcie.asl can be reused for PCIes.
+ //
+ Method(_INI)
+ {
+ Store (LTR6, LTRN)
+ Store (PML6, LMSL)
+ Store (PNL6, LNSL)
+ Store (OBF6, OBFN)
+ }
+ Include("ScPcie.asl")
+ Method(_PRW, 0) { Return(GPRW(0x09, 4)) } // can wakeup from S4 state
+ Method(_PRT, 0) {
+ If (PICM) { Return(AR07) }// APIC mode
+ Return (PR07) // PIC Mode
+ } // end _PRT
+ } // end "PCIE Root Port #06"
+
+ include ("ScSata.asl")
+ // xHCI Controller - Device 20, Function 0
+ include ("ScXhci.asl")
+ include ("ScXdci.asl")
+ include ("ScScc.asl")
+ include ("ScLpss.asl")
+ include ("ScAudio.asl")
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScAudio.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScAudio.asl new file mode 100644 index 0000000000..80da490ce5 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScAudio.asl @@ -0,0 +1,248 @@ +/** @file
+ Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ //
+ // High Definition Audio - Device 14, Function 0
+ //
+ Device(HDAS) {
+ Name(_ADR, 0x000E0000)
+
+ OperationRegion(HDAR, PCI_Config, 0x00,0x100)
+ Field(HDAR,ByteAcc,NoLock,Preserve) {
+ VDID, 32, // 0x00, VID DID
+ Offset(0x48), // 0x48, CGCTL - Clock Gating Control
+ , 6,
+ MBCG, 1, // MISCBDCGE [BIT6]
+ Offset(0x54), // 0x54, Power Management Control and Status Register
+ , 8,
+ PMEE, 1, // PME_EN
+ , 6,
+ PMES, 1 // PME Status
+ }
+
+ // NHLT Table memory descriptor, returned from _DSM
+ Name(NBUF, ResourceTemplate () {
+ // NHLT table address (_MIN = NHLT 64bit pointer, _MAX = _MIN + _LEN - 1) and length (_LEN)
+ // Move to 64 bit mode from 32 bit
+ QWordMemory (ResourceConsumer, , MinNotFixed, MaxNotFixed, NonCacheable, ReadOnly,
+ 0x1, // AddressGranularity
+ 0x0000000000000000, // AddressMinimum _MIN
+ 0x0000000000000000, // AddressMaximum _MAX
+ 0x0,
+ 0x0, // RangeLength _LEN
+ , , NHLT, AddressRangeACPI,)
+ })
+
+ Name(_S0W, 3) // Device can wake itself from D3 in S0
+
+ Method(_DSW, 3) { Store(Arg0, PMEE) } // Device wake enable
+
+ Name (_PRW, Package() {0x0E, 3}) // can wakeup from S3 state
+
+ Method(_PS0,0,Serialized) /// D0 Method for HD-A Controller
+ {
+
+ }
+ Method(_PS3,0,Serialized) /// D3 Method for HD-A Controller(Dummy routine to support D3 state)
+ {
+
+ }
+
+ Method(_INI, 0, NotSerialized) // _INI: Initialize
+ {
+ // Update resource according to NVS
+
+
+ // Set NHLT base address and length
+ CreateQWordField(NBUF, ^NHLT._MIN, NBAS)
+ CreateQWordField(NBUF, ^NHLT._MAX, NMAS)
+ CreateQWordField(NBUF, ^NHLT._LEN, NLEN)
+ Store(NHLA, NBAS)
+ Add(NHLA, Subtract(NHLL, 1), NMAS)
+ Store(NHLL, NLEN)
+ }
+
+ Method(_DSM, 0x4, Serialized, 0, UnknownObj, {BuffObj, IntObj, IntObj, PkgObj}) {
+ // Arg0 - UUID: A69F886E-6CEB-4594-A41F-7B5DCE24C553 (Buffer)
+ // Arg1 - Revision ID: 0x01 (Integer)
+ // Arg2 - Function Index: 0x0 - 0x3 (Integer) - See below for details.
+ // Arg3 - Depends on Function Index - See below for details.
+ // Return - Depends on Function Index - See below for details.
+
+
+ // Verify UUID
+ If (LEqual(Arg0, ToUUID ("A69F886E-6CEB-4594-A41F-7B5DCE24C553"))){
+
+ Switch(ToInteger(Arg2)) {
+
+ // Function 0: Function Support Query
+ // Arg2 - Function Index: 0x00 (Integer)
+ // Arg3: Unused
+ // Return: Bitmask of functions supported. (Buffer)
+ Case(0) {
+ // Supports function 0 - 3
+ Return(Buffer(One) { 0x0F })
+ }
+
+ // Function 1: Query Non HD Audio Descriptor Table
+ // Used by the Intel Offload Engine Driver to discover the
+ // non HD Audio devices supported by the Audio DSP.
+ // Arg2 - Function Index: 0x01 (Integer)
+ // Arg3 - Unused
+ // Return - ACPI Table describing the non HD Audio links and devices supported by the ADSP (ResourceBuffer)
+ Case(1) {
+
+ // NBUF - Memory Resource Descriptor buffer with address and length of NHLT
+ Return(NBUF)
+ }
+
+ // Function 2: Query Feature Mask
+ // Used by the Intel Offload Engine Driver to retrieve a bitmask
+ // of features allowable on this platform.
+ // Arg2 - Function Index: 0x02 (Integer)
+ // Arg3: Unused
+ // Return: Bitmask of supported features.
+ Case (2) {
+
+ //
+ // Bit 0 == '1', WoV is supported, Bit 0 == '0', WoV not supported
+ // Bit 1 == '1', BT Sideband is supported, Bit 1 == '0', BT not supported
+ // Bit 2 == '1', codec based VAD support allowable
+ // Bit 3 == '1', SramReclaim Feature enabled
+ // Bit 4 Reserved
+ // Bit 5 == '1', BT Intel HFP SCO is supported
+ // Bit 6 == '1', BT Intel A2DP is supported
+ // Bit 7 == '1', DSP based speech pre-processing disabled
+ // Bit 8 == '1', Windows Voice Activation, Bit 8 == '0', Intel Wake on Voice
+ // Bit 9 == '1' Context Aware Feature enabled
+ // Bit 10 - 31 Reserved, shall be set to '0'
+ // ADFM - NVS AudioDSP Feature Bit Mask updated from PchPolicy
+ //
+ Return(ADFM)
+ }
+ // Function 3: Query Pre/Post Processing Module Support
+ // Used by the Intel Offload Engine Driver to determine if a
+ // specified PP Module is allowed to be supported on this platform
+ // Arg2 - Function Index: 0x03 (Integer)
+ // Arg3 - UUID: Specifies the UUID of the PP module to check (Buffer)
+ // Return - TRUE if PP Module supported, else FALSE.
+ Case (3) {
+
+ // ADPM - NVS AudioDSP Post-Processing Module Bit Mask updated from PchPolicy: HdaConfig->DspPpModuleMask
+
+ //
+ // Example (to be updated with real GUIDs of supported 3rd party IP):
+ //
+ // 3rd Party DSP Processing Module 1 placeholder (enabled by policy HdaConfig->DspPpModuleMask |= BIT0)
+ // Check PP module with GUID AABBCCDD-EEFF-1122-3344-556677889900
+ // If (LEqual(Arg3, ToUUID ("AABBCCDD-EEFF-1122-3344-556677889900"))){
+ // Return(And(ADPM, 0x1)) // DspPpModuleMask[BIT0] / ADPM[BIT0] set - supported 3rd Party Processing Module 1(return true)
+ // }
+ //
+ // 3rd Party DSP Processing Module 5 placeholder (enabled by policy HdaConfig->DspPpModuleMask |= BIT5)
+ // Check PP module with GUID 11111111-2222-3333-4444-AABBCCDDEEFF
+ // If (LEqual(Arg3, ToUUID ("11111111-2222-3333-4444-AABBCCDDEEFF"))){
+ // Return(And(ADPM, 0x20)) // DspPpModuleMask[BIT5] / ADPM[BIT5] set - supported 3rd Party Processing Module 5(return true)
+ // }
+ //
+ // Implement for all supported PP modules
+ //
+
+ // PP Module Waves (module XAMAXXAU)
+ // Check PP module with GUID B489C2DE-0F96-42E1-8A2D-C25B5091EE49
+ If (LEqual(Arg3, ToUUID ("B489C2DE-0F96-42E1-8A2D-C25B5091EE49"))) {
+ Return(And(ADPM, BIT0)) // ADPM[BIT0] set - supported (return true)
+ }
+
+ // PP Module DTS (module PRMSND)
+ // Check PP module with GUID E1284052-8664-4FE4-A353-3878F72704C3
+ If (LEqual(Arg3, ToUUID ("E1284052-8664-4FE4-A353-3878F72704C3"))) {
+ Return(And(ADPM, BIT1)) // ADPM[BIT1] set - supported (return true)
+ }
+
+ // PP Module IntelSst Speech
+ // Check PP module with GUID 7C708106-3AFF-40FE-88BE-8C999B3F7445
+ If (LEqual(Arg3, ToUUID ("7C708106-3AFF-40FE-88BE-8C999B3F7445"))) {
+ Return(And(ADPM, BIT2)) // ADPM[BIT2] set - supported (return true)
+ }
+
+ // PP Module Dolby
+ // Check PP module with GUID E0E018A8-3550-4B54-A8D0-A8E05D0FCBA2
+ If (LEqual(Arg3, ToUUID ("E0E018A8-3550-4B54-A8D0-A8E05D0FCBA2"))) {
+ Return(And(ADPM, BIT3)) // ADPM[BIT3] set - supported (return true)
+ }
+
+ // PP Module Samsung SoundAlive
+ // Check PP module with GUID 202BADB5-8870-4290-B536-F2380C63F55D
+ If (LEqual(Arg3, ToUUID ("202BADB5-8870-4290-B536-F2380C63F55D"))) {
+ Return(And(ADPM, BIT4)) // ADPM[BIT4] set - supported (return true)
+ }
+
+ // PP Module Samsung SoundBooster
+ // Check PP module with GUID EB3FEA76-394B-495D-A14D-8425092D5CB7
+ If (LEqual(Arg3, ToUUID ("EB3FEA76-394B-495D-A14D-8425092D5CB7"))) {
+ Return(And(ADPM, BIT5)) // ADPM[BIT5] set - supported (return true)
+ }
+
+ // PP Module Samsung EQ/DRC
+ // Check PP module with GUID F1C69181-329A-45F0-8EEF-D8BDDF81E036
+ If (LEqual(Arg3, ToUUID ("F1C69181-329A-45F0-8EEF-D8BDDF81E036"))) {
+ Return(And(ADPM, BIT6)) // ADPM[BIT6] set - supported (return true)
+ }
+
+ // PP Module ForteMedia SAMSoft
+ // Check PP module with GUID B3573EFF-6441-4A75-91F7-4281EEC4597D
+ If (LEqual(Arg3, ToUUID ("B3573EFF-6441-4A75-91F7-4281EEC4597D"))) {
+ Return(And(ADPM, BIT7)) // ADPM[BIT7] set - supported (return true)
+ }
+
+ // PP Module WoV Intel
+ // Check PP module with GUID EC774FA9-28D3-424A-90E4-69F984F1EEB7
+ If (LEqual(Arg3, ToUUID ("EC774FA9-28D3-424A-90E4-69F984F1EEB7"))) {
+ Return(And(ADPM, BIT8)) // ADPM[BIT8] set - supported (return true)
+ }
+
+ // PP Module WoV Sensory
+ // Check PP module with GUID F101FEF0-FF5A-4AD4-8710-43592A6F7948
+ If (LEqual(Arg3, ToUUID ("F101FEF0-FF5A-4AD4-8710-43592A6F7948"))) {
+ Return(And(ADPM, BIT9)) // ADPM[BIT9] set - supported (return true)
+ }
+
+ // PP Module Conexant
+ // Check PP module with GUID F3578986-4400-4ADF-AE7E-CD433CD3F26E
+ If (LEqual(Arg3, ToUUID ("F3578986-4400-4ADF-AE7E-CD433CD3F26E"))) {
+ Return(And(ADPM, BIT10)) // ADPM[BIT10] set - supported (return true)
+ }
+
+ // PP Module Aware
+ // Check PP module with GUID 13B5E4D7-A91A-4059-8290-605B01CCB650
+ If (LEqual(Arg3, ToUUID ("13B5E4D7-A91A-4059-8290-605B01CCB650"))) {
+ Return(And(ADPM, BIT11)) // ADPM[BIT11] set - supported (return true)
+ }
+
+ Return(0) // Is not supported
+ } // Case 3 end
+
+ Default {
+ // Function not supported (Arg2)
+
+ Return(Buffer(One) { 0x00 })
+ }
+ } // Switch(Arg2) End
+ } // If(Arg0, UUID) End
+ // UUID not supported (Arg0)
+
+ Return(Buffer(One) { 0x00 }) //Will never hit this but compiler is not happy without it
+ } // _DSM End
+} // end "High Definition Audio Controller"
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScLpss.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScLpss.asl new file mode 100644 index 0000000000..9ad39c8296 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScLpss.asl @@ -0,0 +1,579 @@ +/** @file
+ ACPI DSDT table
+
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+scope (\_SB.PCI0) {
+ //
+ // LPIO1 PWM
+ //
+ Device(PWM) {
+ Name (_ADR, 0x001A0000)
+ Name (_DDN, "Intel(R) PWM Controller")
+ Name (_UID, 1)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ }
+
+ //
+ // LPIO1 HS-UART #1
+ //
+ Device(URT1) {
+ Name (_ADR, 0x00180000)
+ Name (_DDN, "Intel(R) HS-UART Controller #1")
+ Name (_UID, 1)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+
+ Device (VUT0) {
+ Name (_HID, "INT3511")
+ Method (_STA, 0x0, NotSerialized)
+ {
+ If(LEqual(OSYS,2015)) {
+ Return(0xf)
+ }
+ else {
+ Return(0)
+ }
+ }
+ Method(_CRS, 0x0, NotSerialized){
+ Name(SBUF, ResourceTemplate (){
+ UARTSerialBus(115200,,,0xfc,,,,32,32,"\\_SB.PCI0.URT1" )
+ })
+ Return (SBUF)
+ }
+ } //Device (VUT0)
+
+ } // Device (URT1)
+
+ //
+ // LPIO1 HS-UART #2
+ //
+ Device(URT2) {
+ Name (_ADR, 0x00180001)
+ Name (_DDN, "Intel(R) HS-UART Controller #2")
+ Name (_UID, 2)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+
+ OperationRegion (KEYS, SystemMemory, U21A, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32
+ }
+
+ Device (VUT1) {
+ Name (_HID, "INT3512")
+ Method (_STA, 0x0, NotSerialized)
+ {
+ If(LEqual(OSYS,2015)) {
+ Return(0xf)
+ }
+ else {
+ Return(0)
+ }
+ }
+ Method(_CRS, 0x0, NotSerialized){
+ Name(SBUF, ResourceTemplate (){
+ UARTSerialBus(115200,,,0xfc,,,,32,32,"\\_SB.PCI0.URT2" )
+ })
+ Return (SBUF)
+ }
+ } // Device(VUT1)
+ } // Device (URT2)
+
+ //
+ // LPIO1 HS-UART #3
+ //
+ Device(URT3) {
+ Name (_ADR, 0x00180002)
+ Name (_DDN, "Intel(R) HS-UART Controller #3")
+ Name (_UID, 3)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device (URT3)
+
+ //
+ // LPIO1 HS-UART #4
+ //
+ Device(URT4) {
+ Name (_ADR, 0x00180003)
+ Name (_DDN, "Intel(R) HS-UART Controller #4")
+ Name (_UID, 4)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device (URT4)
+
+ //
+ // LPIO1 SPI
+ //
+ Device(SPI1) {
+ Name (_ADR, 0x00190000)
+ Name (_DDN, "Intel(R) SPI Controller #1")
+ Name (_UID, 1)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device (SPI1)
+
+ //
+ // LPIO1 SPI #2
+ //
+ Device(SPI2) {
+ Name (_ADR, 0x00190001)
+ Name (_DDN, "Intel(R) SPI Controller #2")
+ Name (_UID, 2)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device (SPI2)
+
+ //
+ // LPIO1 SPI #3
+ //
+ Device(SPI3) {
+ Name (_ADR, 0x00190002)
+ Name (_DDN, "Intel(R) SPI Controller #3")
+ Name (_UID, 3)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x8, 0x8, Width32Bit, )
+ //FixedDMA(0x9, 0x9, Width32Bit, )
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device (SPI3)
+
+
+ //
+ // LPIO2 I2C #0
+ // Connect to AUDIO CODEC, MCSI CAM
+ //
+ Device(I2C0) {
+ Name (_ADR, 0x00160000)
+ Name (_DDN, "Intel(R) I2C Controller #0")
+ Name (_UID, 1)
+ Name (LINK,"\\_SB.PCI0.I2C0") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x10, 0x0, Width32Bit, )
+ //FixedDMA(0x11, 0x1, Width32Bit, )
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC0S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device(I2C0)
+
+ //
+ // LPIO2 I2C #1
+ // Connect to NFC
+ //
+ Device(I2C1) {
+ Name (_ADR, 0x00160001)
+ Name (_DDN, "Intel(R) I2C Controller #1")
+ Name (_UID, 2)
+ Name (LINK,"\\_SB.PCI0.I2C1") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC1S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device (I2C1)
+
+ //
+ // LPIO2 I2C #2
+ // Connect to MCSI CAMERA
+ //
+ Device(I2C2) {
+ Name (_ADR, 0x00160002)
+ Name (_DDN, "Intel(R) I2C Controller #2")
+ Name (_UID, 3)
+ Name (LINK,"\\_SB.PCI0.I2C2") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x14, 0x4, Width32Bit, )
+ //FixedDMA(0x15, 0x5, Width32Bit, )
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC2S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device(I2C2)
+
+ //
+ // LPIO2 I2C #3
+ // Connect to TOUCH PANEL
+ //
+ Device(I2C3) {
+ Name (_ADR, 0x00160003)
+ Name (_DDN, "Intel(R) I2C Controller #3")
+ Name (_UID, 4)
+ Name (LINK,"\\_SB.PCI0.I2C3") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x16, 0x6, Width32Bit, )
+ //FixedDMA(0x17, 0x7, Width32Bit, )
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC3S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device(I2C3)
+
+ //
+ // LPIO2 I2C #4
+ // Connect to TOUCH PAD
+ //
+ Device(I2C4) {
+ Name (_ADR, 0x00170000)
+ Name (_DDN, "Intel(R) I2C Controller #4")
+ Name (_UID, 1)
+ Name (LINK,"\\_SB.PCI0.I2C4") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x18, 0x0, Width32Bit, )
+ //FixedDMA(0x19, 0x1, Width32Bit, )
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC4S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device(I2C4)
+
+
+ //
+ // LPIO2 I2C #5
+ // Connect to SENSOR AIC
+ //
+ Device(I2C5) {
+ Name (_ADR, 0x00170001)
+ Name (_DDN, "Intel(R) I2C Controller #5")
+ Name (_UID, 2)
+ Name (LINK,"\\_SB.PCI0.I2C5") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x1A, 0x02, Width32Bit, )
+ //FixedDMA(0x1B, 0x03, Width32Bit, )
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC5S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device(I2C5)
+
+
+ //
+ // LPIO2 I2C #6
+ // Connect to SENSOR AIC
+ //
+ Device(I2C6) {
+ Name (_ADR, 0x00170002)
+ Name (_DDN, "Intel(R) I2C Controller #6")
+ Name (_UID, 3)
+ Name (LINK,"\\_SB.PCI0.I2C6") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x1C, 0x4, Width32Bit, )
+ //FixedDMA(0x1D, 0x5, Width32Bit, )
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC6S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device(I2C6)
+
+ //
+ // LPIO2 I2C #7
+ // Connect to PSS RFID / INA DEVICESx16
+ //
+ Device(I2C7) {
+ Name (_ADR, 0x00170003)
+ Name (_DDN, "Intel(R) I2C Controller #7")
+ Name (_UID, 4)
+ Name (LINK,"\\_SB.PCI0.I2C7") // Support for Windows 7
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ //FixedDMA(0x1C, 0x4, Width32Bit, )
+ //FixedDMA(0x1D, 0x5, Width32Bit, )
+ })
+
+ Method (FREQ, 0x0, Serialized)
+ {
+ Return(IC7S)
+ }
+ Method (FMCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 100, 214, 28 })
+ Return (PKG)
+ }
+ Method (FPCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 38, 80, 12 })
+ Return (PKG)
+ }
+ Method (HSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 5, 24, 12 })
+ Return (PKG)
+ }
+ Method (SSCN, 0x0, Serialized)
+ {
+ Name (PKG, Package(3) { 580,730, 28})
+ Return (PKG)
+ }
+
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ } // Device(I2C7)
+}// PCI0
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScPcie.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScPcie.asl new file mode 100644 index 0000000000..7d281ecc20 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScPcie.asl @@ -0,0 +1,88 @@ +/** @file
+ Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ OperationRegion(PXCS,PCI_Config,0x00,0x380)
+ Field(PXCS,AnyAcc, NoLock, Preserve)
+ {
+ Offset(0),
+ VDID, 32,
+ Offset(0x5A), // SLSTS[7:0] - Slot Status Register
+ ABPX, 1, // 0, Attention Button Pressed
+ , 2,
+ PDCX, 1, // 3, Presence Detect Changed
+ , 2,
+ PDSX, 1, // 6, Presence Detect State
+ , 1,
+ Offset(0x60), // RSTS - Root Status Register
+ , 16,
+ PSPX, 1, // 16, PME Status
+ Offset(0xA4),
+ D3HT, 2, // Power State
+ Offset(0xD8), // MPC - Miscellaneous Port Configuration Register
+ , 30,
+ HPEX, 1, // 30, Hot Plug SCI Enable
+ PMEX, 1, // 31, Power Management SCI Enable
+ }
+
+ Field(PXCS,AnyAcc, NoLock, WriteAsZeros)
+ {
+ Offset(0xDC), // SMSCS - SMI/SCI Status Register
+ , 30,
+ HPSX, 1, // 30, Hot Plug SCI Status
+ PMSX, 1 // 31, Power Management SCI Status
+ }
+
+ Device(PXSX)
+ {
+ Name(_ADR, 0x00000000)
+
+ // NOTE: Any PCIE Hot-Plug dependency for this port is
+ // specific to the CRB. Please modify the code based on
+ // your platform requirements.
+
+ Name(_PRW, Package(){8,4}) //Wake bit for WiFi is 8
+ }
+
+ //
+ // PCI_EXP_STS Handler for PCIE Root Port
+ //
+ Method(HPME,0,Serialized)
+ {
+ If (PMSX) {
+ //
+ // Clear the PME SCI status bit with timeout
+ //
+ Store(200,Local0)
+ While(Local0) {
+ //
+ // Clear PME SCI Status
+ //
+ Store(1, PMSX)
+ //
+ // If PME SCI Status is still set, keep clearing it.
+ // Otherwise, break the while loop.
+ //
+ If (PMSX) {
+ Decrement(Local0)
+ } else {
+ Store(0,Local0)
+ }
+ }
+
+ //
+ // Notify PCIE Endpoint Devices
+ //
+ Notify(PXSX, 0x02)
+ }
+ }
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScSata.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScSata.asl new file mode 100644 index 0000000000..a19be44eb1 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScSata.asl @@ -0,0 +1,66 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_SB.PCI0)
+{
+ //
+ // Serial ATA Host Controller - Device 18, Function 0
+ //
+ Device(SATA) {
+ Name(_ADR,0x00120000)
+
+ Device(PRT0)
+ {
+ Name(_ADR,0x0000FFFF) // Port 0
+ }
+ Device(PRT1)
+ {
+ Name(_ADR,0x0001FFFF) // Port 1
+ }
+ //
+ // SATA Methods pulled in via SSDT.
+ //
+ OperationRegion(SATR, PCI_Config, 0x74,0x4)
+ Field(SATR,WordAcc,NoLock,Preserve) {
+ Offset(0x00), // 0x74, PMCR
+ , 8,
+ PMEE, 1, //PME_EN
+ , 6,
+ PMES, 1 //PME_STS
+ }
+
+ Method (_STA, 0x0, NotSerialized)
+ {
+ //Enable SATA controller PME_EN bit
+ Store (1, \_SB.PCI0.SATA.PMEE)
+ Return(0xf)
+ }
+
+ Method(_DSW, 3)
+ {
+ If (Arg1) { // Entering Sx, need to disable WAKE# from generating runtime PME
+ Store(0, \_SB.PCI0.SATA.PMEE)
+ } Else { // Staying in S0
+ If (LAnd(Arg0, Arg2)) {
+ // Exiting D0 and arming for wake
+ // Set PME
+ Store(1, \_SB.PCI0.SATA.PMEE)
+ } Else { // Disable runtime PME, either because staying in D0 or disabling wake
+ Store(0, \_SB.PCI0.SATA.PMEE)
+ }
+ }
+ } // End _DSW
+ }
+}
+
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScScc.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScScc.asl new file mode 100644 index 0000000000..9432a25626 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScScc.asl @@ -0,0 +1,719 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(EEPI, IntObj)
+
+scope (\_SB.PCI0) {
+
+ //
+ // Access P2SB CFG Space
+ //
+ // P2SB PCI MMCFG Space: 0xE0000000
+ // P2SB Device: 0xD, Function: 0x0
+ // P2SB MM CFG Interface Access Registers: 0xD0 - 0xDC
+ //
+ OperationRegion(P2CG, SystemMemory, OR( OR (0xE0000000, ShiftLeft(0xD, 15)), 0xD0), 0x20) // P2SB PCI CFG SB Interface Registers
+ Field(P2CG, DWordAcc, NoLock, Preserve)
+ {
+ Offset (0x00), // SBI Addr (0xD0)
+ SBAD, 32,
+ Offset (0x04), // SBI Data (0xD4)
+ SBDA, 32,
+ Offset (0x08), // SBI Stat (0xD8)
+ IRDY, 1,
+ , 6,
+ POST, 1,
+ OPCD, 8,
+ Offset (0x0A), // SBI RID (0xDA)
+ SBID, 16,
+ Offset (0x0C), // SBI Ext Addr (0xDC)
+ SBEA, 32,
+ Offset (0x10), // P2SBC - P2SB Control (0xE0)
+ , 8,
+ P2HD, 8 // P2SB HIDE bit [8:8] (use the byte which is reserved)
+ }
+
+ //
+ // SBI Method:
+ // SBI message execution
+ //
+ // Arguments: (4)
+ // Arg0: Addr
+ // Arg1: WriteData
+ // Arg2: OpCode
+ // Arg3: RID
+ //
+ // Return Value:
+ // ReadData
+ //
+ Method (SBIM, 4, Serialized)
+ {
+ Store (0x0, Local0)
+ //
+ // Acquire the ACPI Global Lock to Ensure Exclusive Access to the P2SB Interface
+ //
+ Store(Acquire (\_GL, 0x1F40), Local1)
+ If (LEqual(Local1, 0)) {
+ // Unhide P2SB CFG Space
+ Store (0, P2HD)
+
+ // Wait Until InitRdy == 0 (Transaction Complete)
+ While (IRDY)
+ {
+ Sleep (1)
+ }
+
+ // SBIADDR
+ And (SBAD, 0x00F00000, SBAD)
+ Or (SBAD, Arg0, SBAD)
+
+ // SBIEXTADDR
+ Store (0, SBEA)
+
+ // SBIDATA
+ Store (Arg1, SBDA)
+
+ // SBIRID
+ And (SBID, 0x0800, SBID)
+ Or (SBID, Arg3, SBID)
+
+ // SBISTAT
+ Store (0, POST) // set non-posted access
+ Store (Arg2, OPCD)
+ Store (1, IRDY)
+
+ // Wait Until InitRdy == 0 (Transaction Complete)
+ While (IRDY)
+ {
+ Sleep (1)
+ }
+ Store (SBDA, local0)
+
+ // Hide P2SB CFG Space
+ Store (1, P2HD)
+ }
+ Release (\_GL)
+ Return (local0)
+ }
+
+ OperationRegion (SBMM, SystemMemory, OR( OR (P2BA, ShiftLeft(0xD6, 16)), 0x0600), 0x18)
+ Field (SBMM, DWordAcc, NoLock, Preserve)
+ {
+ Offset (0x00),
+ GENR, 32,
+ Offset (0x08),
+ , 5,
+ GRR3, 1,
+ }
+
+ //
+ // SCC power gate control method, this method must be serialized as multiple device will control the GENR register
+ //
+ // Arguments: (2)
+ // Arg0: 0-AND 1-OR
+ // Arg1: Value
+ Method (SCPG, 2, Serialized)
+ {
+ Name (TMP, 0x0)
+ if (LEqual(Arg0, 0x1)) {
+ Store (\_SB.PCI0.GENR, TMP)
+ Or (TMP, Arg1, \_SB.PCI0.GENR)
+
+ } ElseIf(LEqual(Arg0, 0x0)) {
+ Store (\_SB.PCI0.GENR, TMP)
+ And (TMP, Arg1, \_SB.PCI0.GENR)
+ }
+ }
+
+ //
+ // eMMC
+ //
+ Device(SDHA) {
+ Name (_ADR, 0x001C0000)
+ Name (_DDN, "Intel(R) eMMC Controller - 80865ACC")
+ Name (_UID, 1)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+
+ OperationRegion (PMCS, PCI_Config, 0x84, 0x4)
+ Field (PMCS, WordAcc, NoLock, Preserve) {
+ PMSR, 32, // 0x84, PMCSR - Power Management Control and Status
+ }
+
+ OperationRegion (SCPC, PCI_Config, 0xA0, 4)
+ Field (SCPC, WordAcc, NoLock, Preserve)
+ {
+ Offset (0x00), // 0xA0 D0i3 Max Power Latency Powergating Config
+ , 17,
+ I3EN, 1,
+ DPGE, 1
+ }
+
+ Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
+ {
+ Return (RBUF)
+ }
+
+ Method (_PS0, 0, NotSerialized) // _PS0: Power State 0
+ {
+ //
+ // Disable power gate
+ //
+ Store (0, \_SB.PCI0.SDHA.DPGE)
+ Store (0, \_SB.PCI0.SDHA.I3EN)
+ //
+ // Clear clock gate
+ //
+ \_SB.PCI0.SCPG(0,0xFFFFFFBE) // Clear bit 6 and 0
+ Sleep (2) // Sleep 2 ms
+
+ }
+
+ Method (_PS3, 0, NotSerialized) // _PS3: Power State 3
+ {
+ Store (SBIM (0xD600003C, 0, 0x0, 0x30E0), local0)
+ Store (SBIM (0xD6000834, 0, 0x0, 0x30E0), local1)
+ Store (SBIM (0xD6000840, 0, 0x0, 0x30E0), local2)
+
+ If (And (Local0, 0x00800000)) {
+ Add (Multiply (And (local2, 0x1F), 2), ShiftRight(And (Local1, 0x3F00), 8), local3)
+ Or (And (local1, 0xFFFFFF80), And (local3, 0x7F), local1)
+ SBIM (0xD6000834, local1, 0x1, 0x30E0)
+ }
+ //
+ // Enable power gate
+ //
+ Store (1, \_SB.PCI0.SDHA.DPGE)
+ Store (1, \_SB.PCI0.SDHA.I3EN)
+ //
+ // Restore clock gate
+ //
+ \_SB.PCI0.SCPG(1,0x00000041) // restore bit 6 and 0
+
+ //
+ // Dummy read PMCSR
+ //
+
+ Store (PMSR, Local0)
+ And (Local0, 1, Local0) // Dummy operation on Local0
+ }
+
+ Method(_DSM, 0x4, Serialized)
+ {
+ //check the UUID
+ if (LEqual(Arg0, ToUUID("f6c13ea5-65cd-461f-ab7a-29f7e8d5bd61"))) {
+ //check the revision
+ If (LEqual(Arg1, Zero)) {
+ //Switch statement based on the function index.
+ switch (ToInteger(Arg2)) {
+ //
+ // Function Index 0 the return value is a buffer containing
+ // one bit for each function index, starting with zero.
+ // Bit 0 - Indicates whether there is support for any functions other than function 0.
+ // Bit 1 - Indicates support to clear power control register
+ // Bit 2 - Indicates support to set power control register
+ // Bit 3 - Indicates support to set 1.8V signalling
+ // Bit 4 - Indicates support to set 3.3V signalling
+ // Bit 5 - Indicates support for HS200 mode
+ // Bit 6 - Indicates support for HS400 mode
+ //
+ // On SPT, for eMMC we have to support functions for
+ // HS200 and HS400
+ //
+
+ case(0)
+ {
+ Return(Buffer() {0x61})
+ }
+
+ //
+ // Function index 5 - corresponds to HS200 mode
+ // Return value from this function is used to program
+ // the UHS Mode Select bits in Host Control 2.
+ // 011b - corresponds to SDR104 and according to the
+ // SD Host Controller Spec and this value is overloaded
+ // to program the controller to select HS200 mode for eMMC.
+ //
+
+ case(5)
+ {
+ Return(Buffer() {0x3})
+ }
+
+ //
+ // Function index 6 - corresponds to HS400 mode
+ // Return value from this function is used to program
+ // the UHS Mode Select bits in Host Control 2.
+ // 101b is a reserved value according to the SD Host
+ // Controller Spec and we use this value for HS400 mode
+ // selection.
+ //
+
+ case(6)
+ {
+ Return(Buffer() {0x5})
+ }
+ } // End - Switch(Arg2)
+
+ Return(Buffer() {0x0})
+ } Else {
+ Return(Buffer() {0x0})
+ } //End - If else statement for revision check
+ } Else {
+ Return(Buffer() {0x0})
+ } //End - If else statement for UUID check
+ }
+
+ Device (EMMD)
+ {
+ Name (_ADR, 0x00000008) // Slot 0, Function 8
+ Method (_RMV, 0, NotSerialized)
+ {
+ Return (0x0)
+ }
+ }
+ } // Device(SDHA)
+
+ //
+ // UFS
+ //
+ Device(UFSH) {
+ Name (_ADR, 0x001D0000)
+ Name (_DDN, "Intel(R) UFS Controller - 80865ACE")
+ Name (_UID, 1)
+
+ OperationRegion (PMCS, PCI_Config, 0x84, 0x4)
+ Field (PMCS, WordAcc, NoLock, Preserve) {
+ PMSR, 32, // 0x84, PMCSR - Power Management Control and Status
+ }
+
+ Method (_PS0, 0, NotSerialized) { // _PS0: Power State 0
+ }
+
+ Method (_PS3, 0, NotSerialized) { // _PS3: Power State 3
+ //
+ // Dummy read PMCSR
+ //
+
+ Store (PMSR, Local0)
+ And (Local0, 1, Local0) // Dummy operation on Local0
+ }
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+ Method (_CRS, 0x0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+
+ Device (UFSD)
+ {
+ Name (_ADR, 0x00000008) // Slot 0, Function 8
+ Method (_RMV, 0, NotSerialized)
+ {
+ Return (0x0)
+ }
+ }
+ } // Device(UFSH)
+
+ //
+ // SDIO
+ //
+ Device(SDIO) {
+ Name (_ADR, 0x001E0000)
+ Name (_DDN, "Intel(R) SDIO Controller - 80865AD0")
+ Name (_UID, 1)
+ Name (_S0W, 0x03) // _S0W: S0 Device Wake State
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ })
+
+ Name (PSTS, 0x0)
+
+ OperationRegion (SCPC, PCI_Config, 0xA0, 4)
+ Field (SCPC, WordAcc, NoLock, Preserve)
+ {
+ Offset (0x00), // 0xA0 D0i3 Max Power Latency Powergating Config
+ , 17,
+ I3EN, 1,
+ DPGE, 1
+ }
+
+ OperationRegion (PMCS, PCI_Config, 0x84, 0x4)
+ Field (PMCS, WordAcc, NoLock, Preserve) {
+ PMSR, 32, // 0x84, PMCSR - Power Management Control and Status
+ }
+
+ Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
+ {
+ Return (RBUF)
+ }
+
+ Method (_PS0, 0, NotSerialized) // _PS0: Power State 0
+ {
+ If (LEqual(\_SB.PCI0.SDIO.PSTS,0x0)) {
+ //
+ // Disable power gate
+ //
+ Store (0, \_SB.PCI0.SDIO.DPGE)
+ Store (0, \_SB.PCI0.SDIO.I3EN)
+ //
+ // Enable clock gate
+ //
+ \_SB.PCI0.SCPG(0,0xFFFFFEFE) // Clear bit 8 and 0
+ Sleep (2) // Sleep 2 ms
+
+ Store( 0x1, \_SB.PCI0.SDIO.PSTS) // Indicates that the device is powered ON
+ }
+ }
+
+ Method (_PS3, 0, NotSerialized) // _PS3: Power State 3
+ {
+ If (LEqual(\_SB.PCI0.SDIO.PSTS,0x1)) {
+ //
+ // Enable power gate
+ //
+ Store (1, \_SB.PCI0.SDIO.DPGE)
+ Store (1, \_SB.PCI0.SDIO.I3EN)
+
+ //
+ // Restore clock gate
+ //
+ \_SB.PCI0.SCPG(1,0x00000101) // restore bit 8 and 0
+
+ //
+ // Dummy read PMCSR
+ //
+
+ Store (PMSR, Local0)
+ And (Local0, 1, Local0) // Dummy operation on Local0
+ Store( 0x0, \_SB.PCI0.SDIO.PSTS) // Indicates that the device is powered OFF
+ }
+ }
+
+ Method (_DSW, 3, NotSerialized) // _DSW: Device Sleep Wake
+ {
+ }
+ } // Device(SDIO)
+
+ //
+ // SD Card
+ //
+ Device (SDC) {
+ Name (_ADR, 0x001B0000) // _ADR: Address
+ Name (_DDN, "Intel(R) SD Card Controller - 80865ACA") // _DDN: DOS Device Name
+ Name (_S0W, 0x03) // _S0W: S0 Device Wake State
+ Name (GDW0, 0x00000000)
+ Name (GDW1, 0x00000000)
+
+ Method (_CRS, 0x0, Serialized)
+ {
+ Name (RBUF, ResourceTemplate ()
+ {
+ //
+ // Don't align with BoardGpio setting. If do, system can't enter S3 with SD card in slot.
+ //
+ GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0, "\\_SB.GPO3", 0, ResourceConsumer, , ) {26} // GPIO_177(SW pin 26):SDCARD_CD_B (SDMMC3_CD_N)
+ GpioIo(Shared, PullDefault, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO3", 0, ResourceConsumer, , ) {26} // GPIO_177(SW pin 26):SDCARD_CD_B (SDMMC3_CD_N)
+ })
+
+ Return (RBUF)
+ }
+
+ //
+ // The EPI tool uses the SD Card slot. If the EPI tool is inserted in the SD Card slot, we need to make sure that the slot
+ // remains powered after OS boot. In order to prevent SD Card enumeration and power down of the slot, we disable the device when EPI
+ // is enabled in setup.
+ //
+ Method (_STA, 0x0, NotSerialized)
+ {
+ If (Lequal(EEPI, 1)) {
+ Return(0x0)
+ } Else {
+ Return(0xF)
+ }
+ }
+
+ OperationRegion (SCPC, PCI_Config, 0xA0, 4)
+ Field (SCPC, WordAcc, NoLock, Preserve)
+ {
+ Offset (0x00), // 0xA0 D0i3 Max Power Latency Powergating Config
+ , 17,
+ I3EN, 1,
+ DPGE, 1
+ }
+
+ OperationRegion(PCCS, PCI_Config, 0x84, 0x04)
+ Field(PCCS, WordAcc, NoLock, Preserve) {
+ PMSR, 32 // 84h: Power Gating Control
+ }
+
+
+
+ OperationRegion (SCGI, SystemMemory, Or(GP3A, 0x100), 0x10)
+ Field (SCGI, DWordAcc, NoLock, Preserve)
+ {
+ Offset (0x00),
+ GPIS, 32, // GPI Interrupt Status
+ }
+
+ OperationRegion (SCGP, SystemMemory, Or(GP3A, 0x5D0), 0x2C)
+ Field (SCGP, DWordAcc, NoLock, Preserve)
+ {
+ Offset (0x00), // SDCARD_CD (177-26) Pad Cfg DW0
+ , 1,
+ RXST, 1, // GPIO RX State
+ , 23,
+ RXEV, 2, // RX Level/Edge Configuration
+ Offset (0x20), // SDCARD_PWR_DOWN_B (183-30) Pad Cfg DW0
+ GPOV, 1 // GPO Value
+ }
+
+ //
+ // Update GPIO Interrupt status and value used by SD card.
+ //
+ Method (WAK, 0x0, Serialized) {
+ //
+ // Write clear GPIO_177 Interrupt status (bit26)
+ //
+ If (LEqual (\_SB.PCI0.SDC.GPIS, 0x04000000)) {
+ Store (0x04000000, \_SB.PCI0.SDC.GPIS)
+ }
+ \_SB.SPC0 (SW_GPIO_177, GDW0)
+ \_SB.SPC1 (SW_GPIO_177, GDW1)
+ }
+
+ Method(_INI, 0)
+ {
+ Not(\_SB.PCI0.SDC.RXST, \_SB.PCI0.GRR3) // Set Card Presence in host controller to inverse of RX State in GPIO pad
+ }
+
+ Method (_PS0, 0, NotSerialized) // _PS0: Power State 0
+ {
+ //
+ // Set Card Presence in Host Controller to Inverse of RX State in GPIO Pad
+ //
+ Not(\_SB.PCI0.SDC.RXST, \_SB.PCI0.GRR3)
+
+ //
+ // Disable power gate
+ //
+ Store (0, \_SB.PCI0.SDC.DPGE)
+ Store (0, \_SB.PCI0.SDC.I3EN)
+
+ //
+ // Clear clock gate
+ //
+ \_SB.PCI0.SCPG(0, 0xFFFFFBFE) // Clear bit 10 and 0
+
+ Sleep (2) // Sleep 2 ms
+
+ //
+ // Restore clock gate
+ //
+ \_SB.PCI0.SCPG(1, 0x00000401) // restore bit 10 and 0
+
+ //
+ // Turn Card Power On
+ //
+ // GPIO 183: Set GPIOTXState = 0
+ //
+
+ If (LEqual(BDID,GRBM)) {
+ Store (1, \_SB.PCI0.SDC.GPOV)
+ } Else {
+ Store (0, \_SB.PCI0.SDC.GPOV)
+ }
+
+ //
+ // Save GPIO_177 DW0 and DW1
+ //
+ If (LAnd (LEqual (GDW0, 0), LEqual (\_SB.PCI0.SDC.RXEV, 0))) {
+ Store (\_SB.GPC0 (SW_GPIO_177), GDW0)
+ Store (\_SB.GPC1 (SW_GPIO_177), GDW1)
+ }
+ }
+
+ Method (_PS3, 0, NotSerialized) // _PS3: Power State 3
+ {
+ Store (PMSR, Local0)
+
+ //
+ // Turn Card Power Off
+ //
+ // GPIO 183: Set GPIOTXState = 1
+ //
+
+ If (LEqual(BDID,GRBM)) {
+ Store (0, \_SB.PCI0.SDC.GPOV)
+ } Else {
+ Store (1, \_SB.PCI0.SDC.GPOV)
+ }
+
+ //
+ // Clear Normal Interrupt Status Enable Bit 6 & 7
+ // Clear Normal Interrupt Signal Enable Bit 6 & 7
+ //
+ // Note: SB Port = 0xD6 (SCC), Reg Offset = 0x34 and Reg Offset = 0x38, OpCode = MRd (0)
+
+ // Only Perform the WA If the Card is Already Inserted
+ If (LEqual(\_SB.PCI0.GRR3, 1)) {
+ If (LEqual(Local0, 0)) {
+ SBIM (0xD6000034, 0, 0x1, 0x30D8)
+ SBIM (0xD6000038, 0, 0x1, 0x30D8)
+ }
+ }
+
+ //
+ // Clear Present Bit (S0ix Fix)
+ //
+ Store (0, \_SB.PCI0.GRR3)
+
+ //
+ // Restore clock gate
+ //
+ \_SB.PCI0.SCPG(1, 0x00000401) // restore bit 10 and 0
+
+ //
+ // Enable power gate
+ //
+ Store (1, \_SB.PCI0.SDC.DPGE)
+ Store (1, \_SB.PCI0.SDC.I3EN)
+
+ //
+ // Dummy read PMCSR (SCC D3 WA)
+ //
+
+ Store (PMSR, Local0)
+
+ }
+
+ Method(_DSM, 0x4, Serialized)
+ {
+ //
+ // Switch based on which unique function identifier was passed in Arg3.
+ //
+ If (LEqual(Arg0, ToUUID("f6c13ea5-65cd-461f-ab7a-29f7e8d5bd61"))) {
+ Switch (ToInteger(Arg2))
+ {
+ //
+ // Function 0: Return supported functions.
+ // Currently, we only support: Query, 1.8v & 3.3v switch support functions.
+ //
+ Case (0)
+ {
+ Switch (ToInteger(Arg1))
+ {
+ //
+ // REVISION 0: DSM has 6 Supported SUB functions
+ //
+ Case (0) {Return (Buffer() {0x19})}
+ }
+ // Default Case: Report no functions supported
+ Return (Buffer() {0x00})
+ }
+ //
+ // Function 1: Clear Power Control Register
+ //
+ Case (1)
+ {
+ //Store (Zero, DL13)
+ Return (Zero)
+ }
+ //
+ // Function 2: Set power control register
+ //
+ Case (2)
+ {
+ //
+ // Set Power Control Code
+ //
+
+ Return (Buffer(){0x00})
+ }
+ // Function 3: Set 1.8v Signalling
+ Case (3)
+ {
+ //
+ // 1.8v Signalling Code
+ //
+ // BXT-P: Nothing to be done here.
+ //
+
+ Return (Buffer(){0x00})
+ }
+ // Function 4: Set 3.3v Signalling
+ Case (4)
+ {
+ //
+ // 3.3v Signalling Code
+ //
+ // Power Off SD Card:
+ // GPIO 183:
+ // Set gpiotxstate =1
+ //
+
+ // GPIO 183: Set GPIOTXState = 1
+
+ If (LEqual(BDID,GRBM)) {
+ Store (0, \_SB.PCI0.SDC.GPOV)
+ } Else {
+ Store (1, \_SB.PCI0.SDC.GPOV)
+ }
+ // Sleep for 50ms Between Powering Off / Powering On
+ Sleep (50)
+
+ // Power On SD Card:
+ // GPIO 183:
+ // Set gpiotxstate = 0
+
+ // GPIO 183: Set GPIOTXState = 0
+
+ If (LEqual(BDID,GRBM)) {
+ Store (1, \_SB.PCI0.SDC.GPOV)
+ } Else {
+ Store (0, \_SB.PCI0.SDC.GPOV)
+ }
+
+ Return (Buffer(){0x00})
+ }
+ // Function 5: Enable HS200 capability
+ Case (5)
+ {
+ Return (Buffer(){0x00})
+ }
+ // Function 6: Enable HS400 capability
+ Case (6)
+ {
+ Return (Buffer(){0x00})
+ }
+ // Function 7 (Reserved): Enable Platform Speed Register
+ }
+ //
+ // If not one of the function identifiers we recognize, then return a buffer
+ // with bit 0 set to 1 indicating no functions supported.
+ //
+ Return (Buffer(){0x01})
+ }
+ Else
+ {
+ Return (Buffer(One){0x0})
+ }
+ }
+ } // Device(SDC)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScSmb.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScSmb.asl new file mode 100644 index 0000000000..1cf8b83c31 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScSmb.asl @@ -0,0 +1,558 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+// Define various SMBus PCI Configuration Space Registers.
+
+OperationRegion(SMBP,PCI_Config,0x40,0xC0)
+Field(SMBP,DWordAcc,NoLock,Preserve)
+{
+ , 2,
+ I2CE, 1
+}
+
+OperationRegion(SMPB,PCI_Config,0x20,4)
+Field(SMPB,DWordAcc,NoLock,Preserve)
+{
+ , 5,
+ SBAR, 11
+}
+
+// Define various SMBus IO Mapped Registers.
+
+OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
+Field(SMBI,ByteAcc,NoLock,Preserve)
+{
+ HSTS, 8, // 0 - Host Status Register
+ Offset(0x02),
+ HCON, 8, // 2 - Host Control
+ HCOM, 8, // 3 - Host Command
+ TXSA, 8, // 4 - Transmit Slave Address
+ DAT0, 8, // 5 - Host Data 0
+ DAT1, 8, // 6 - Host Data 1
+ HBDR, 8, // 7 - Host Block Data
+ PECR, 8, // 8 - Packer Error Check
+ RXSA, 8, // 9 - Receive Slave Address
+ SDAT, 16, // A - Slave Data
+}
+
+// SMBus Send Byte - This function will write a single byte of
+// data to a specific Slave Device per SMBus Send Byte Protocol.
+// Arg0 = Address
+// Arg1 = Data
+// Return: Success = 1
+// Failure = 0
+
+Method(SSXB,2,Serialized)
+{
+ // Step 1: Confirm the ICHx SMBus is ready to perform
+ // communication.
+
+ If (STRT()) {
+ Return(0)
+ }
+
+ // Step 2: Initiate a Send Byte.
+
+ Store(0,I2CE) // Ensure SMbus Mode.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Arg0,TXSA) // Write Address in TXSA.
+ Store(Arg1,HCOM) // Data in HCOM.
+
+ // Set the SMBus Host control register to 0x48.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 001 = Byte Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x48,HCON)
+
+ // Step 3: Exit the Method correctly.
+
+ If (COMP) {
+ Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
+ Return(1) // Return Success.
+ }
+ Return(0)
+}
+
+// SMBus Receive Byte - This function will write a single byte
+// of data to a specific Slave Device per SMBus Receive Byte
+// Protocol.
+// Arg0 = Address
+// Return: Success = Byte-Size Value
+// Failure = Word-Size Value = FFFFh.
+
+Method(SRXB,1,Serialized)
+{
+ // Step 1: Confirm the ICHx SMBus is ready to perform
+ // communication.
+
+ If (STRT()) {
+ Return(0xFFFF)
+ }
+
+ // Step 2: Initiate a Receive Byte.
+
+ Store(0,I2CE) // Ensure SMbus Mode.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
+
+ // Set the SMBus Host control register to 0x48.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 001 = Byte Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x44,HCON)
+
+ // Step 3: Exit the Method correctly.
+
+ If (COMP) {
+ Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
+ Return(DAT0) // Return Success.
+ }
+ Return(0xFFFF) // Return Failure.
+}
+
+// SMBus Write Byte - This function will write a single byte
+// of data to a specific Slave Device per SMBus Write Byte
+// Protocol.
+// Arg0 = Address
+// Arg1 = Command
+// Arg2 = Data
+// Return: Success = 1
+// Failure = 0
+
+Method(SWRB,3,Serialized)
+{
+ // Step 1: Confirm the ICHx SMBus is ready to perform communication.
+
+ If (STRT()) {
+ Return(0)
+ }
+
+ // Step 2: Initiate a Write Byte.
+
+ Store(0,I2CE) // Ensure SMbus Mode.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Arg0,TXSA) // Write Address in TXSA.
+ Store(Arg1,HCOM) // Command in HCOM.
+ Store(Arg2,DAT0) // Data in DAT0.
+
+ // Set the SMBus Host control register to 0x48.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 010 = Byte Data Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x48,HCON)
+
+ // Step 3: Exit the Method correctly.
+
+ If (COMP) {
+ Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
+ Return(1) // Return Success.
+ }
+
+ Return(0) // Return Failure.
+}
+
+// SMBus Read Byte - This function will read a single byte of data
+// from a specific slave device per SMBus Read Byte Protocol.
+// Arg0 = Address
+// Arg1 = Command
+// Return: Success = Byte-Size Value
+// Failure = Word-Size Value
+
+Method(SRDB,2,Serialized)
+{
+ // Step 1: Confirm the ICHx SMBus is ready to perform communication.
+
+ If (STRT()) {
+ Return(0xFFFF)
+ }
+
+ // Step 2: Initiate a Read Byte.
+
+ Store(0,I2CE) // Ensure SMbus Mode.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
+ Store(Arg1,HCOM) // Command in HCOM.
+
+ // Set the SMBus Host control register to 0x48.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 010 = Byte Data Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x48,HCON)
+
+ // Step 3: Exit the Method correctly.
+
+ If (COMP) {
+ Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
+ Return(DAT0) // Return Success.
+ }
+
+ Return(0xFFFF) // Return Failure.
+}
+
+// SMBus Write Word - This function will write a single word
+// of data to a specific Slave Device per SMBus Write Word
+// Protocol.
+// Arg0 = Address
+// Arg1 = Command
+// Arg2 = Data (16 bits in size)
+// Return: Success = 1
+// Failure = 0
+
+Method(SWRW,3,Serialized)
+{
+ // Step 1: Confirm the ICHx SMBus is ready to perform communication.
+
+ If (STRT()) {
+ Return(0)
+ }
+
+ // Step 2: Initiate a Write Word.
+
+ Store(0,I2CE) // Ensure SMbus Mode.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Arg0,TXSA) // Write Address in TXSA.
+ Store(Arg1,HCOM) // Command in HCOM.
+ And(Arg2,0xFF,DAT1) // Low byte Data in DAT1.
+ And(ShiftRight(Arg2,8),0xFF,DAT0) // High byte Data in DAT0.
+
+ // Set the SMBus Host control register to 0x4C.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 011 = Word Data Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x4C,HCON)
+
+ // Step 3: Exit the Method correctly.
+
+ If (COMP()) {
+ Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others.
+ Return(1) // Return Success.
+ }
+
+ Return(0) // Return Failure.
+}
+
+// SMBus Read Word - This function will read a single byte of data
+// from a specific slave device per SMBus Read Word Protocol.
+// Arg0 = Address
+// Arg1 = Command
+// Return: Success = Word-Size Value
+// Failure = Dword-Size Value
+
+Method(SRDW,2,Serialized)
+{
+ // Step 1: Confirm the ICHx SMBus is ready to perform communication.
+
+ If (STRT()) {
+ Return(0xFFFF)
+ }
+
+ // Step 2: Initiate a Read Word.
+
+ Store(0,I2CE) // Ensure SMbus Mode.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
+ Store(Arg1,HCOM) // Command in HCOM.
+
+ // Set the SMBus Host control register to 0x4C.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 011 = Word Data Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x4C,HCON)
+
+ // Step 3: Exit the Method correctly.
+
+ If (COMP()) {
+ Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others.
+ Return(Or(ShiftLeft(DAT0,8),DAT1)) // Return Success.
+ }
+
+ Return(0xFFFFFFFF) // Return Failure.
+}
+
+// SMBus Block Write - This function will write an entire block of data
+// to a specific slave device per SMBus Block Write Protocol.
+// Arg0 = Address
+// Arg1 = Command
+// Arg2 = Buffer of Data to Write
+// Arg3 = 1 = I2C Block Write, 0 = SMBus Block Write
+// Return: Success = 1
+// Failure = 0
+
+Method(SBLW,4,Serialized)
+{
+ // Step 1: Confirm the ICHx SMBus is ready to perform communication.
+
+ If (STRT()) {
+ Return(0)
+ }
+
+ // Step 2: Initiate a Block Write.
+
+ Store(Arg3,I2CE) // Select the proper protocol.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Arg0,TXSA) // Write Address in TXSA.
+ Store(Arg1,HCOM) // Command in HCOM.
+ Store(Sizeof(Arg2),DAT0) // Count in DAT0.
+ Store(0,Local1) // Init Pointer to Buffer.
+ Store(DerefOf(Index(Arg2,0)),HBDR) // First Byte in HBD Register.
+
+ // Set the SMBus Host control register to 0x48.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 101 = Block Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x54,HCON)
+
+ // Step 3: Send the entire Block of Data.
+
+ While(LGreater(Sizeof(Arg2),Local1))
+ {
+ // Wait up to 200ms for Host Status to get set.
+
+ Store(4000,Local0) // 4000 * 50us = 200ms.
+
+ While(LAnd(LNot(And(HSTS,0x80)),Local0))
+ {
+ Decrement(Local0) // Decrement Count.
+ Stall(50) // Delay = 50us.
+ }
+
+ If (LNot(Local0)) { // Timeout?
+ KILL() // Yes. Kill Communication.
+ Return(0) // Return failure.
+ }
+
+ Store(0x80,HSTS) // Clear Host Status.
+ Increment(Local1) // Point to Next Byte.
+
+ // Place next byte in HBDR if last byte has not been sent.
+
+ If (LGreater(Sizeof(Arg2),Local1)) {
+ Store(DerefOf(Index(Arg2,Local1)),HBDR)
+ }
+ }
+
+ // Step 4: Exit the Method correctly.
+
+ If (COMP()) {
+ Or(HSTS,0xFF,HSTS) // Clear all status bits.
+ Return(1) // Return Success.
+ }
+
+ Return(0) // Return Failure.
+}
+
+// SMBus Block Read - This function will read a block of data from
+// a specific slave device per SMBus Block Read Protocol.
+// Arg0 = Address
+// Arg1 = Command
+// Arg2 = 1 = I2C Block Write, 0 = SMBus Block Write
+// Return: Success = Data Buffer (First Byte = length)
+// Failure = 0
+
+Method(SBLR,3,Serialized)
+{
+ Name(TBUF, Buffer(256) {})
+
+ // Step 1: Confirm the ICHx SMBus is ready to perform communication.
+
+ If (STRT()) {
+ Return(0)
+ }
+
+ // Step 2: Initiate a Block Read.
+
+ Store(Arg2,I2CE) // Select the proper protocol.
+ Store(0xBF,HSTS) // Clear all but INUSE_STS.
+ Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
+ Store(Arg1,HCOM) // Command in HCOM.
+
+ // Set the SMBus Host control register to 0x48.
+ // Bit 7: = 0 = reserved
+ // Bit 6: = 1 = start
+ // Bit 5: = 0 = disregard, I2C related bit
+ // Bits 4:2: = 101 = Block Protocol
+ // Bit 1: = 0 = Normal Function
+ // Bit 0: = 0 = Disable interrupt generation
+
+ Store(0x54,HCON)
+
+ // Step 3: Wait up to 200ms to get the Data Count.
+
+ Store(4000,Local0) // 4000 * 50us = 200ms.
+
+ While(LAnd(LNot(And(HSTS,0x80)),Local0))
+ {
+ Decrement(Local0) // Decrement Count.
+ Stall(50) // Delay = 50us.
+ }
+
+ If (LNot(Local0)) { // Timeout?
+ KILL() // Yes. Kill Communication.
+ Return(0) // Return failure.
+ }
+
+ Store(DAT0,Index(TBUF,0)) // Get the Data Count.
+ Store(0x80,HSTS) // Clear Host Status.
+ Store(1,Local1) // Local1 = Buffer Pointer.
+
+ // Step 4: Get the Block Data and store it.
+
+ While(LLess(Local1,DerefOf(Index(TBUF,0))))
+ {
+ // Wait up to 200ms for Host Status to get set.
+
+ Store(4000,Local0) // 4000 * 50us = 200ms.
+
+ While(LAnd(LNot(And(HSTS,0x80)),Local0))
+ {
+ Decrement(Local0) // Decrement Count.
+ Stall(50) // Delay = 50us.
+ }
+
+ If (LNot(Local0)) { // Timeout?
+ KILL() // Yes. Kill Communication.
+ Return(0) // Return failure.
+ }
+
+ Store(HBDR,Index(TBUF,Local1)) // Place into Buffer.
+ Store(0x80,HSTS) // Clear Host Status.
+ Increment(Local1)
+ }
+
+ // Step 5: Exit the Method correctly.
+
+ If (COMP()) {
+ Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others.
+ Return(TBUF) // Return Success.
+ }
+
+ Return(0) // Return Failure.
+}
+
+
+// SMBus Start Check
+// Return: Success = 0
+// Failure = 1
+
+Method(STRT,0,Serialized)
+{
+ // Wait up to 200ms to confirm the SMBus Semaphore has been
+ // released (In Use Status = 0). Note that the Sleep time may take
+ // longer as the This function will yield the Processor such that it
+ // may perform different tasks during the delay.
+
+ Store(200,Local0) // 200 * 1ms = 200ms.
+
+ While(Local0)
+ {
+ If (And(HSTS,0x40)) { // In Use Set?
+ Decrement(Local0) // Yes. Decrement Count.
+ Sleep(1) // Delay = 1ms.
+ If (LEqual(Local0,0)) { // Count = 0?
+ Return(1) // Return failure.
+ }
+ } Else {
+ Store(0,Local0) // In Use Clear. Continue.
+ }
+ }
+
+ // In Use Status = 0 during last read, which will make subsequent
+ // reads return In Use Status = 1 until software clears it. All
+ // software using ICHx SMBus should check this bit before initiating
+ // any SMBus communication.
+
+ // Wait up to 200ms to confirm the Host Interface is
+ // not processing a command.
+
+ Store(4000,Local0) // 4000 * 50us = 200ms.
+
+ While(Local0)
+ {
+ If (And(HSTS,0x01)) { // Host Busy Set?
+ Decrement(Local0) // Decrement Count.
+ Stall(50) // Delay = 50us.
+ If (LEqual(Local0,0)) { // Count = 0?
+ KILL() // Yes. Kill Communication.
+ }
+ } Else {
+ Return(0)
+ }
+ }
+
+ Return(1) // Timeout. Return failure.
+}
+
+// SMBus Completion Check
+// Return: Success = 1
+// Failure = 0
+
+Method(COMP,0,Serialized)
+{
+ // Wait for up to 200ms for the Completion Command
+ // Status to get set.
+
+ Store(4000,Local0) // 4000 * 50us = 200ms.
+
+ While(Local0)
+ {
+ If (And(HSTS,0x02)) { // Completion Status Set?
+ Return(1) // Yes. We are done.
+ } Else {
+ Decrement(Local0) // Decrement Count.
+ Stall(50) // Delay 50us.
+ If (LEqual(Local0,0)) { // Count = 0?
+ KILL() // Yes. Kill Communication.
+ }
+ }
+ }
+
+ Return(0) // Timeout. Return Failure.
+}
+
+// SMBus Kill Command
+
+Method(KILL,0,Serialized)
+{
+ Or(HCON,0x02,HCON) // Yes. Send Kill command.
+ Or(HSTS,0xFF,HSTS) // Clear all status.
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScXdci.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScXdci.asl new file mode 100644 index 0000000000..8a6eb782e9 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScXdci.asl @@ -0,0 +1,300 @@ +/** @file
+ Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(XDCE, IntObj)
+External(XDAT, MethodObj)
+
+Scope(\_SB.PCI0)
+{
+ Device(XDCI)
+ {
+ Name (_ADR, 0x00150001) // _ADR: Address Device 21, Function 1
+ OperationRegion (OTGD, PCI_Config, 0x0, 0x100)
+ Field (OTGD, DWordAcc, NoLock, Preserve)
+ {
+ Offset(0x0),
+ DVID, 16,
+ Offset(0x10),
+ XDCB, 64
+ }
+ //
+ // Byte access for PMCS field to avoid race condition on device D-state.
+ //
+ Field (OTGD, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0x74), // PM_CS - Power Management Control/Status
+ D0I3, 2, // PM_CS[1:0] PowerState
+ , 6,
+ PMEE, 1, // bit 8, PME Enable
+ , 6,
+ PMES, 1 // bit 15, PME Status
+ }
+
+ Name (_DDN, "Broxton XDCI controller") // _DDN: DOS Device Name
+ Name (_STR, Unicode ("Broxton XDCI controller")) // _STR: Description String
+
+ Method(_S0W, 0)
+ {
+ Return (3)
+ }
+
+ Method (_DSW, 3) // _DSW: Device Sleep Wake
+ {
+ Return (Zero)
+ }
+
+ Name (_PRW, Package() {0x0C, 4}) // Declare xDCI GPE status and enable bits are bit 12.
+
+ Method(XDBA, 0)
+ {
+ Return(And(^XDCB, 0xFFFFFFFFFFFFFF00))
+ }
+
+ //
+ // Arg0: UUID = {732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511}
+ // Arg1: Revision ID = 1
+ // Arg2: Function Index
+ // Arg3: Argument
+ //
+ Method(_DSM,4,Serialized)
+ {
+ If (PCIC(Arg0)) { Return(PCID(Arg0,Arg1,Arg2,Arg3)) }
+
+
+ If (LEqual(Arg0, ToUUID("732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"))) {
+ If (Lequal(Arg1, 1)) {
+ //
+ // Set PMU Power State
+ // Arg0: 0x00 PMU should enter the D0 power state.
+ // 0x03 PMU should enter the D3 power state.
+ // Arg1: 0x03 Enable PMU PME
+ // 0x00 Clear PMU PME
+ //
+ Method (SPPS,2,Serialized) {
+ OperationRegion(XDBW, SystemMemory, XDBA(), 0x110000)
+ Field(XDBW, WordAcc, NoLock, Preserve)
+ {
+ Offset(0x10f810),
+ , 8,
+ U2CP, 2, // USB2 core power state
+ U3CP, 2, // USB3 core power state
+ Offset(0x10f818),
+ PUPS, 2, // PMU power state
+ , 1,
+ PURC, 1, // Reset PMU core
+ , 12,
+ Offset(0x10f81c),
+ , 3,
+ UXPE, 2, // U2 PME EN / U3 PME EN
+ , 11,
+ }
+
+ // Local 1 is power state D0 or D3
+ Store(Arg0, Local1)
+ // Local 2 is Enable/Clear PMU PME
+ Store(Arg1, Local2)
+
+ If (LEqual(Local1, 0)) {
+
+ // Clear PMU PME
+ // 0x10F81C BIT3: USB3 PME
+ // 0x10F81C BIT4: USB2 PME
+ Store(0, UXPE)
+ // Wait for at least 100us, currently configured to 1000us
+ Store(0, Local0)
+ While (LLess(Local0, 10)) {
+ Stall(100)
+ Increment(Local0)
+ }
+ // Set PMU to D0 by writing 0 to 0x10f818 Bit 1:0
+ Store(0, PUPS)
+ // Wait 200ms for PMU to enter D0
+ // Confirm PMU being in D0 by checking 0x10f810 Bit 11:8 to be clear
+ // 0x10f810 Bit 11:10 - Current power state of USB3 core
+ // 0x10f810 Bit 9:8 - Current power state of USB2 core
+ // both should be clear
+ Store(0,Local0)
+ While (LLess(Local0,2000)) {
+ Stall(100)
+ If (LAnd(LEqual(U2CP,0),LEqual(U3CP,0))) {
+ break
+ }
+ Increment(Local0)
+ }
+ If (LNotEqual(U2CP, 0)) {
+ // Show warning message
+
+ }
+ If (LNotEqual(U3CP, 0)) {
+ // Show warning message
+
+ }
+ Return(0)
+ }
+
+ If (LEqual(Local1, 3)) {
+
+ // PMU should be in D0 at this point
+ // 0x10f810 Bit 11:10 - current power state of USB3 core
+ // 0x10f810 Bit 9:8 - current power state of USB2 core
+ // both should be clear
+ If (LNotEqual(U2CP, 0)) {
+ // Show warning message
+
+ }
+ If (LNotEqual(U3CP, 0)) {
+ // Show warning message
+
+ }
+ // Set PMU to D3 by writing 3 to 0x10f818 bit 1:0
+ Store(3, PUPS)
+ // Wait 200ms for PMU to enter D3
+ // Confirm PMU being in D3 by checking 0x10f810 Bit 11:8 to be set
+ // 0x10f810 Bit 11:10 - Current power state of USB3 core
+ // 0x10f810 Bit 9:8 - Current power state of USB2 core
+ // both should be set
+ Store(0,Local0)
+ While (LLess(Local0,2000)) {
+ Stall(100)
+ If (LAnd(LEqual(U2CP,3),LEqual(U3CP,3))) {
+ break
+ }
+ Increment(Local0)
+ }
+ If (LNotEqual(U2CP, 3)) {
+ // Show warning message
+
+ }
+ If (LNotEqual(U3CP, 3)) {
+ // Show warning message
+
+ }
+ // Set/Clear PMU PME
+ // 0x10F81C BIT3: USB3 PME
+ // 0x10F81C BIT4: USB2 PME
+ Store(Local2, UXPE)
+ Return(0)
+ }
+ Return(0)
+ }
+
+ Switch(ToInteger(Arg2)){
+ Case(0){
+ // Function 0: return Bit map to indicate Function 0,1,3,4,5,6,7 supported
+
+ Return(Buffer(){0xfb})
+ }
+ Case(1){
+ // Function 1: Attach/Detach and Port Detection Properties Method
+ // This method is called by the USB function stack to set the power state of the PMU.
+ // Bit 0 as 1: to indicate Platform support for Attach/detach notify
+ // Bit 1 as 0:HW based charging indication
+
+ Return(0x1)
+ }
+ Case(3){
+ // Function 3: Check xDCI status
+ // Return (0x0), xDCI disabled
+ // Return (0x1), xDCI enabled
+
+ Return(XDCE)
+ }
+ Case(4){
+ // Function 4: Set PMU Power State Method, clear PMU PME
+ // Arg3: A package consisting of 1 ULONG value
+ // 0x00 PMU should enter the D0 power state.
+ // 0x03 PMU should enter the D3 power state.
+
+
+ // Local 1 is power state D0 or D3
+ Store(DerefOf(Index(Arg3,0)), Local1)
+
+
+ // Set PMU to Dx state and clear PMU PME
+ SPPS(Local1, 0)
+ }
+ Case(5){
+ // Function 5: Attach Notification Enabled Method
+ // This method is called by the USB function stack to indicate that it has enabled ACPI attach detach notifications.
+ // In response the platform may issue an notification indicating the current attach/detach state of the controller.
+
+ // If device is attached, notify XDCI with 0x80
+ // If device is detached, notify XDCI with 0x81
+
+
+
+ Return(0)
+ }
+ Case(6){
+ // Function 6: XDCI Soft Reset Workaround
+ // Return value indicate to OS softreset should be done by OS or not
+ // Return value == 1: OS does softreset
+ // Return value == 0: platform does softreset
+
+
+
+ OperationRegion(XDBD, SystemMemory, XDBA(), 0x110000)
+ Field(XDBD, DwordAcc, NoLock, Preserve)
+ {
+ Offset(0xC704),
+ , 30,
+ CSFR, 1,
+ , 1,
+ }
+ OperationRegion(XDW2, SystemMemory, XDBA(), 0x110000)
+ Field(XDW2, WordAcc, NoLock, Preserve)
+ {
+ Offset(0x10f820),
+ , 13,
+ OTHC, 1, // OTG switched to host complete
+ }
+
+ If (LEqual(OTHC, 0)) {
+ Store(1, CSFR)
+ // timeout is 100ms
+ Store(0, Local0)
+ While (LLess(Local0, 100)) {
+ If (LEqual(CSFR, 0)) {
+ Break
+ }
+ Sleep(1)
+ }
+ }
+ Return(0)
+ }
+ Case(7){
+ // Function 7: Get PMU Power State Method
+ // Return:
+ // 0: PMU is in D0 state
+ // 3: PMU is in D3 state
+
+
+
+ OperationRegion(XD22, SystemMemory, XDBA(), 0x110000)
+ Field(XD22, WordAcc, NoLock, Preserve)
+ {
+ Offset(0x10f818),
+ P2PS, 2, // PMU power state
+ , 14,
+ }
+ Store(P2PS, Local0)
+ Return(Local0)
+ }
+ } // Switch Arg2
+ } // if Rev == 1
+ } // if UUID match
+ Return(0)
+ } // _DSM
+ } // XDCI
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScXhci.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScXhci.asl new file mode 100644 index 0000000000..34a93fc9ad --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/ScXhci.asl @@ -0,0 +1,611 @@ +/** @file
+ Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//scope is \_SB.PCI0.XHC
+Device(XHC) {
+ Name(_ADR, 0x00150000) //Device 21, Function 0
+
+ Name (_DDN, "Broxton XHCI controller (Host only)" )
+ Name (_STR, Unicode ("Broxton XHCI controller (Host only)"))
+
+ Method(_S0W, 0x0, NotSerialized) // _S0W: S0 Device Wake State
+ {
+ Return(0x3)
+ }
+ Name (_PRW, Package() {0x0D, 4}) // Declare XHCI GPE status and enable bits are bit 13.
+
+ OperationRegion (USBR, PCI_Config, 0x74, 0x04)
+ Field (USBR, WordAcc, NoLock, Preserve)
+ {
+ Offset (0x01),
+ PMEE, 1,
+ , 6,
+ PMES, 1
+ }
+
+ Method (_DSW, 3, NotSerialized) // _DSW: Device Sleep Wake
+ {
+ Store (Arg0, PMEE)
+ }
+
+ Method (_RMV, 0, NotSerialized) // _RMV: Removal Status
+ {
+ Return (Zero)
+ }
+ //_PS3 is removed as requested (SV D3 verified)
+
+ Method(_STA, 0)
+ {
+ Return (0xF)
+ }
+
+ Device(RHUB)
+ {
+ Name(_ADR, Zero)
+
+ Method(TPLD, 2, Serialized) { // For the port related with USB Tyep C. copied and modifined from GPLD
+ // Arg0: Visiable
+ // Arg1: Group position
+ Name(PCKG, Package() { Buffer(0x14) {} } )
+ CreateField(DerefOf(Index(PCKG,0)), 0, 7, REV)
+ Store(1,REV)
+ CreateField(DerefOf(Index(PCKG,0)), 64, 1, VISI)
+ Store(Arg0, VISI)
+ CreateField(DerefOf(Index(PCKG,0)), 87, 8, GPOS)
+ Store(Arg1, GPOS)
+ CreateField(DerefOf(Index(PCKG,0)), 128, 32,VHOS)
+ Store(0xFFFFFFFF, VHOS)
+
+ // Following add for USB type C
+ CreateField(DerefOf(Index(PCKG,0)), 74, 4, SHAP) // Shape set to Oval
+ Store(1, SHAP)
+ CreateField(DerefOf(Index(PCKG,0)), 32, 16, WID) // Width of the connector, 8.34mm
+ Store(8, WID)
+ CreateField(DerefOf(Index(PCKG,0)), 48, 16, HGT) // Height of the connector, 2.56mm
+ Store(3, HGT)
+ return (PCKG)
+ }
+ Method(TUPC, 1, Serialized) { // For the port related with USB Tyep C. copied and modifined from GUPC
+ // Arg0: Type
+ // Type:
+ // 0x08: Type-C connector - USB2-only
+ // 0x09: Type-C connector - USB2 and SS with Switch
+ // 0x0A: Type-C connector - USB2 and SS without Switch
+ Name(PCKG, Package(4) { 1, 0x00, 0, 0 } )
+ Store(Arg0,Index(PCKG,1))
+ return (PCKG)
+ }
+
+ //
+ // High Speed Ports
+ // It would be USB2.0 port if SS termination is disabled
+
+ // The UPC declarations for LS/FS/HS and SS ports that are paired to form a USB3.0 compatible connector.
+ // A "pair" is defined by two ports that declare _PLDs with identical Panel, Vertical Position, Horizontal Postion, Shape, Group Orientation
+ // and Group Token
+
+ Device(HS01) // Pair with SS01: OTG(Dual Role) Port
+ {
+ Name(_ADR, 0x01)
+ Method(_UPC,0,Serialized) {
+ Return (TUPC(9))
+ }
+
+ Method(_PLD,0,Serialized) {
+ Return (TPLD(1,1))
+ }
+ }//end of HS01
+
+ Device(HS02)
+ {
+ Name(_ADR, 0x02)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() { 0xFF,0x00,0x00,0x00 })
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x41, 0x08, 0x02, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of HS02
+
+ Device(HS03)
+ {
+ Name(_ADR, 0x03)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() { 0xFF,0xFF,0x00,0x00 })
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x03, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of HS03
+
+ Device(HS04)
+ {
+ Name(_ADR, 0x04)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() { 0xFF,0x00,0x00,0x00 })
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x41, 0x08, 0x04, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of HS04
+
+ Device(HS05)
+ {
+ Name(_ADR, 0x05)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() { 0xFF,0x00,0x00,0x00 })
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x41, 0x08, 0x05, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of HS05
+
+ Device(HS06)
+ {
+ Name(_ADR, 0x06)
+ Method(_UPC,0,Serialized) {
+ // No connect
+ Name(UPCP, Package() { 0x00,0xFF,0x00,0x00 })
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x06, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of HS06
+
+ Device(HS07)
+ {
+ Name(_ADR, 0x07)
+ Method(_UPC,0,Serialized) {
+ // No connect
+ Name(UPCP, Package() { 0xFF,0xFF,0x00,0x00 })
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x07, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of HS07
+
+ Device(HS08)
+ {
+ Name(_ADR, 0x08)
+ Method(_UPC,0,Serialized) {
+ // No connect
+ Name(UPCP, Package() { 0xFF,0xFF,0x00,0x00 })
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x08, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+
+ // Add Camera built in Device
+ Device (FCAM)
+ {
+ Name(_ADR, 0x08)
+
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() { 0xFF,0xFF,0x00,0x00 }) // Connectable, Proprietary connector
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() {
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'000 in-visiable/ no docking/no lid bit[69:67]=b'100 front panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x60, 0x08, 0x08, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }
+ }//end of HS08
+
+ //
+ // Super Speed Ports - must match _UPC declarations of the corresponding Full Speed Ports.
+ //
+ Device(SSP1) //Pair with HS01: OTG(Dual Role) Port
+ {
+ Name(_ADR, 0x09)
+ Method(_UPC,0,Serialized) {
+ Return (TUPC(9))
+ }
+
+ Method(_PLD,0,Serialized) {
+ Return (TPLD(1,1))
+ }
+ }//end of SSP1
+
+ Device(SSP2)
+ {
+ Name(_ADR, 0x0A)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() {
+ 0xFF, //port is connectable if non-zero
+ 0x03, //USB3 Type A connector
+ 0x00,
+ 0x00 })
+
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() { //pls check ACPI 5.0 section 6.1.8
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x41, 0x08, 0x02, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of SSP2
+
+ Device(SSP3)
+ {
+ Name(_ADR, 0x0B)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() {
+ 0xFF, //port is connectable if non-zero
+ 0xFF,
+ 0x00,
+ 0x00 })
+
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() { //pls check ACPI 5.0 section 6.1.8
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x03, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of SSP3
+
+ Device(SSP4)
+ {
+ Name(_ADR, 0x0C)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() {
+ 0x00, //port is not-connectable
+ 0xFF, //proprietary connector going to PCIe port
+ 0x00,
+ 0x00 })
+
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() { //pls check ACPI 5.0 section 6.1.8
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x04, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of SSP4
+
+ Device(SSP5)
+ {
+ Name(_ADR, 0x0D)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() {
+ 0xFF, //port is connectable if non-zero
+ 0x03, //USB3 Type A connector
+ 0x00,
+ 0x00 })
+
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() { //pls check ACPI 5.0 section 6.1.8
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x41, 0x08, 0x05, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of SSP5
+
+ Device(SSP6)
+ {
+ Name(_ADR, 0x0E)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() {
+ 0x00, //port is connectable if non-zero
+ 0xFF,
+ 0x00,
+ 0x00 })
+
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() { //pls check ACPI 5.0 section 6.1.8
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x06, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of SSP6
+
+ //
+ // SSIC PORT
+ //
+ Device(SSP7)
+ {
+ Name(_ADR, 0x0F)
+ Method(_UPC,0,Serialized) {
+ Name(UPCP, Package() {
+ 0x00, //port is connectable if non-zero
+ 0xFF, //proprietary connector
+ 0x00,
+ 0x00 })
+
+ Return(UPCP)
+ }
+
+ Method(_PLD,0,Serialized) {
+ Name(PLDP, Package() { //pls check ACPI 5.0 section 6.1.8
+ Buffer(0x14)
+ {
+ //31:0 - Bit[6:0]=2 revision is 0x2, Bit[7]=1 Ignore Color Bit[31:8]=0 RGB color is ignored
+ 0x82, 0x00, 0x00, 0x00,
+ //63:32 - Bit[47:32]=0 width: 0x0000 Bit[63:48]=0 Height:0x0000
+ 0x00, 0x00, 0x00, 0x00,
+ //95:64 - bit[66:64]=b'011 visiable/docking/no lid bit[69:67]=b'001 bottom panel bit[71:70]=b'01 Center bit[73:72]=b'01 Center
+ // bit[77:74]=6 Horizontal Trapezoid bit[78]=0 bit[86:79]=0 bit[94:87]='0 no group info' bit[95]=0 not a bay
+ //[71:64][79:72][87:80][95:88]
+ 0x40, 0x08, 0x07, 0x00,
+ //127:96 -bit[96]=1 Ejectable bit[97]=1 OSPM Ejection required Bit[105:98]=0 no Cabinet Number
+ // bit[113:106]=0 no Card cage Number bit[114]=0 no reference shape Bit[118:115]=0 no rotation Bit[123:119]=0 no order
+ 0x00, 0x00, 0x00, 0x00,
+ //159:128 Vert. and Horiz. Offsets not supplied
+ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+
+ Return (PLDP)
+ }
+ }//end of SSP7
+ } //end of root hub
+} // end of XHC1
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtPcie.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtPcie.asl new file mode 100644 index 0000000000..82465f0a59 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtPcie.asl @@ -0,0 +1,312 @@ +/** @file
+ ACPI RTD3 SSDT table for BXT PCIe
+
+ Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ Name(WKEN, 0)
+
+ Method(_S0W, 0)
+ {
+ /// This method returns the lowest D-state supported by PCIe root port during S0 state
+
+ ///- PMEs can be generated from D3Cold for ULT
+ Return(4)
+
+ /** @defgroup pcie_s0W PCIE _S0W **/
+ } // End _S0W
+
+
+ Method(_DSW, 3)
+ {
+ /// This method is used to enable/disable wake from PCIe (WKEN)
+ If (Arg1) { /// If entering Sx, need to disable WAKE# from generating runtime PME
+ Store(0, WKEN)
+ } Else { /// If Staying in S0
+ If (LAnd(Arg0, Arg2)) {
+ ///- Check if Exiting D0 and arming for wake
+ ///- Set PME
+ Store(1, WKEN)
+ } Else { ///- Disable runtime PME, either because staying in D0 or disabling wake
+ Store(0, WKEN)
+ }
+ }
+
+ /** @defgroup pcie_dsw PCIE _DSW **/
+ } // End _DSW
+
+
+ PowerResource(PXP, 0, 0)
+ {
+ /// Define the PowerResource for PCIe slot
+ /// Method: _STA(), _ON(), _OFF()
+ /** @defgroup pcie_pxp PCIE Power Resource **/
+
+ Method(_STA, 0)
+ {
+ /// Returns the status of PCIe slot core power
+
+ // detect power pin status
+ if (LNotEqual(DeRefOf(Index(PWRG, 0)),0)) {
+ if (LEqual(DeRefOf(Index(PWRG, 0)),1)) { // GPIO mode
+ if (LEqual(\_SB.GGOV(DeRefOf(Index(PWRG, 2))),DeRefOf(Index(PWRG, 3)))) {
+ Return (1)
+ } Else {
+ Return (0)
+ }
+ } // GPIO mode
+ }
+ // detect reset pin status
+ if (LNotEqual(DeRefOf(Index(RSTG, 0)),0)) {
+ if (LEqual(DeRefOf(Index(RSTG, 0)),1)) { // GPIO mode
+ if (LEqual(\_SB.GGOV(DeRefOf(Index(RSTG, 2))),DeRefOf(Index(RSTG, 3)))) {
+ Return (1)
+ } Else {
+ Return (0)
+ }
+ } // GPIO mode
+ }
+ Return (0)
+ } /** @defgroup pcie_sta PCIE _STA method **/
+
+ Method(_ON,0,Serialized) /// Turn on core power to PCIe Slot
+ {
+ Name(PCIA, 0)
+ //
+ // Windows will call _ON for all devices,regardless
+ // of the device enable state.
+ // We need to exit when the device is not present
+ // to prevent driving power to the device.
+ //
+ if (LEqual(SLOT, 1)) {
+ ShiftRight(RPA1, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ PON(PCIA)
+ } elseif(LEqual(SLOT, 2)) {
+ ShiftRight(RPA2, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ PON(PCIA)
+ } elseif(LEqual(SLOT, 3)) {
+ ShiftRight(RPA3, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ PON(PCIA)
+ } elseif(LEqual(SLOT, 4)) {
+ ShiftRight(RPA4, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ PON(PCIA)
+ } elseif(LEqual(SLOT, 5)) {
+ ShiftRight(RPA5, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ PON(PCIA)
+ } elseif(LEqual(SLOT, 6)) {
+ ShiftRight(RPA6, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ PON(PCIA)
+ }
+ }
+
+ Method(PON, 1, Serialized) {
+ OperationRegion(PX02,SystemMemory, Arg0,0x380)
+ Field(PX02,AnyAcc, NoLock, Preserve)
+ {
+ Offset(0),
+ VD02, 32,
+ Offset(0x50), // LCTL - Link Control Register
+ L0SE, 1, // 0, L0s Entry Enabled
+ , 3,
+ LDIS, 1,
+ Offset(0x52), // LSTS - Link Status Register
+ , 13,
+ LASX, 1, // 0, Link Active Status
+ Offset(0xE2), // RPPGEN - Root Port Power Gating Enable
+ , 2,
+ L23E, 1, // 2, L23_Rdy Entry Request (L23ER)
+ L23R, 1, // 3, L23_Rdy to Detect Transition (L23R2DT)
+ Offset(0xF4), // BLKPLLEN
+ , 10,
+ BPLL, 1,
+ Offset(0x324),
+ , 3,
+ LEDM, 1, // PCIEDBG.DMIL1EDM
+ Offset(0x338),
+ , 26,
+ BDQA, 1 // BLKDQDA
+ }
+ /// Turn ON Power for PCIe Slot
+ if (LNotEqual(DeRefOf(Index(WAKG, 0)),0)) { // if power gating enabled
+ if (LEqual(DeRefOf(Index(WAKG, 0)),1)) { // GPIO mode
+ \_SB.SGOV(DeRefOf(Index(WAKG, 2)),DeRefOf(Index(WAKG, 3)))
+ // \_SB.SHPO(DeRefOf(Index(WAKG, 2)), 0) // set gpio ownership to ACPI(0=ACPI mode, 1=GPIO mode)
+ Store(\_SB.GPC0(DeRefOf(Index(WAKG, 2))), Local1)
+ Or(Local1, 0x400000, Local1)
+ And(Local1, 0xFFFFFBFF, Local1)
+ \_SB.SPC0(DeRefOf(Index(WAKG, 2)), Local1)
+ }
+ }
+
+ If (LEqual(DeRefOf(Index(SCLK,0)), 1)) {
+ Store(\_SB.GPC0(DeRefOf(Index(SCLK,1))), Local1)
+ And(Local1, 0xFFBFFFFF, Local1)
+ \_SB.SPC0(DeRefOf(Index(SCLK,1)), Local1)
+ }
+
+ \_SB.SGOV(DeRefOf(Index(RSTG, 2)),DeRefOf(Index(RSTG, 3)))
+
+ Store(0, BDQA) // Set BLKDQDA to 0
+ Store(0, BPLL) // Set BLKPLLEN to 0
+
+ /// Set L23_Rdy to Detect Transition (L23R2DT)
+ Store(1, L23R)
+ Sleep(16)
+ Store(0, Local0)
+ /// Wait up to 12 ms for transition to Detect
+ While(L23R) {
+ If(Lgreater(Local0, 4)) // Debug - Wait for 5 ms
+ {
+ Break
+ }
+ Sleep(16)
+ Increment(Local0)
+ }
+ }
+
+ Method(_OFF,0,Serialized) /// Turn off core power to PCIe Slot
+ {
+ Name(PCIA, 0)
+
+ Switch(ToInteger(SLOT)) {
+ Case(1) {
+ ShiftRight(RPA1, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ }
+ Case(2) {
+ ShiftRight(RPA2, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ }
+ Case(3) {
+ ShiftRight(RPA3, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ }
+ Case(4) {
+ ShiftRight(RPA4, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ }
+ Case(5) {
+ ShiftRight(RPA5, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ }
+ Case(6) {
+ ShiftRight(RPA6, 1, PCIA)
+ Or(0xE0000000, PCIA, PCIA)
+ }
+ Default {
+ }
+ }
+
+ // Dynamic Opregion needed to access registers when the controller is in D3 cold
+ OperationRegion(PX02,SystemMemory,PCIA,0x380)
+ Field(PX02,AnyAcc, NoLock, Preserve)
+ {
+ Offset(0x50), // LCTL - Link Control Register
+ L0SE, 1, // 0, L0s Entry Enabled
+ , 3,
+ LDIS, 1,
+ Offset(0xE2), // RPPGEN - Root Port Power Gating Enable
+ , 2,
+ L23E, 1, // 2, L23_Rdy Entry Request (L23ER)
+ L23R, 1, // 3, L23_Rdy to Detect Transition (L23R2DT)
+ Offset(0xF4), // BLKPLLEN
+ , 10,
+ BPLL, 1,
+ Offset(0x324),
+ , 3,
+ LEDM, 1, // PCIEDBG.DMIL1EDM
+ Offset(0x338),
+ , 26,
+ BDQA, 1 // BLKDQDA
+ }
+ /// Set L23_Rdy Entry Request (L23ER)
+ Store(1, L23E)
+ Sleep(16)
+ Store(0, Local0)
+ While(L23E) {
+ If (Lgreater(Local0, 4)) {
+ /// Debug - Wait for 5 ms
+ Break
+ }
+ Sleep(16)
+ Increment(Local0)
+ }
+
+ Store(1, BDQA) // Set BLKDQDA to 1
+ Store(1, BPLL) // Set BLKPLLEN to 1
+
+ if (LNotEqual(DeRefOf(Index(WAKG, 0)),0)) {
+ // if power gating enabled
+ if (LEqual(DeRefOf(Index(WAKG, 0)),1)) {
+ // GPIO mode
+ Store(\_SB.GPC0(DeRefOf(Index(WAKG, 2))), Local1)
+ Or(Local1, 0x400, Local1)
+ And(Local1, 0xFFBFFFFF, Local1)
+ \_SB.SPC0(DeRefOf(Index(WAKG, 2)), Local1)
+ }
+ }
+
+ /// Assert Reset Pin
+ if (LNotEqual(DeRefOf(Index(RSTG, 0)),0)) {
+ // if reset pin enabled
+ if (LEqual(DeRefOf(Index(RSTG, 0)),1)) {
+ // GPIO mode
+ \_SB.SGOV(DeRefOf(Index(RSTG, 2)),Xor(DeRefOf(Index(RSTG, 3)),1))
+ }
+ }
+
+
+ /// assert CLK_REQ MSK
+ if (LEqual(DeRefOf(Index(SCLK, 0)),1)) {
+ // if power gating enabled
+ Store(\_SB.GPC0(DeRefOf(Index(SCLK, 1))), Local1)
+ Or(Local1, 0x400000, Local1)
+ \_SB.SPC0(DeRefOf(Index(SCLK, 1)), Local1)
+ }
+
+ /** @defgroup pcie_off PCIE _OFF method **/
+ } // End of Method_OFF
+ } // End PXP
+
+ Name(_PR0, Package(){PXP})
+ Name(_PR3, Package(){PXP})
+
+ //
+ // _SxW, in Sx, the lowest power state supported to wake up the system
+ // _SxD, in Sx, the highest power state supported by the device
+ // If OSPM supports _PR3 (_OSC, Arg3[2]), 3 represents D3hot; 4 represents D3cold, otherwise 3 represents D3.
+ //
+
+ Method (_S3D, 0, Serialized)
+ {
+ Return (0x2)
+ }
+ Method (_S3W, 0, Serialized)
+ {
+ Return (0x3)
+ }
+ Method (_S4D, 0, Serialized)
+ {
+ Return (0x2)
+ }
+ Method (_S4W, 0, Serialized)
+ {
+ Return (0x3)
+ }
+
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtSata.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtSata.asl new file mode 100644 index 0000000000..f6b6f15659 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtSata.asl @@ -0,0 +1,216 @@ +/** @file
+ ACPI RTD3 SSDT table for BXT SATA
+
+ Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ Method(_DSW, 3, Serialized)
+ {
+ }
+
+ /// _S0W method returns the lowest D-state can be supported in state S0.
+ Method(_S0W, 0)
+ {
+ Return(4) // return 4 (D3cold)
+ } // End _S0W
+
+ Method(_PR0) {
+ If (LAnd(LAnd(LAnd(And(RCG0, 0x01), 0x01), LGreaterEqual(\OSYS, 2012)), LEqual(PORT, 0))) {
+ // Return ODPR for ZPODD
+ Return(Package(){ODPR})
+ } ElseIf (LAnd(LGreaterEqual(\OSYS, 2015), LEqual(\EMOD, 1))) {
+ If (CondRefOf(\_SB.MODS)) {
+ Return(Package(){\_SB.MODS})
+ }
+ } Else {
+ If (CondRefOf(SPPR)) {
+ Return(Package(){SPPR})
+ }
+ }
+ Return(Package() {})
+ }
+ Method(_PR3) {
+ If (LAnd(LAnd(LAnd(And(RCG0, 0x01), 0x01), LGreaterEqual(\OSYS, 2012)), LEqual(PORT, 0))) {
+ // Return ODPR for ZPODD
+ Return(Package(){ODPR})
+ } ElseIf (LAnd(LGreaterEqual(\OSYS, 2015), LEqual(\EMOD, 1))) {
+ If (CondRefOf(\_SB.MODS)) {
+ Return(Package(){\_SB.MODS})
+ }
+ } Else {
+ If (CondRefOf(SPPR)) {
+ Return(Package(){SPPR})
+ }
+ }
+ Return(Package() {})
+ }
+
+ PowerResource(SPPR, 0, 0)
+ {
+ Method(_STA)
+ {
+ If (LEqual(\EMOD, 1)) {
+ Return(0x01)
+ } Else {
+ Return(SPSA())
+ }
+ }
+
+ Method(_ON) {
+ If (LEqual(\EMOD, 1)) {
+ // Do nothing
+ } Else {
+ SPON() // _ON Method
+ Sleep(16) // Delay for power ramp.
+ }
+ }
+
+ Method(_OFF) {
+ If (LEqual(\EMOD, 1)) {
+ // Do nothing
+ } Else {
+ SPOF()
+ }
+ }
+ } // end SPPR
+
+ Name(OFTM, Zero) /// OFTM: Time returned by Timer() when the Power resource was turned OFF
+ Method(SPSA) {
+
+ // check power control enable
+ If (LNotEqual(DeRefOf(Index(PWRG, 0)), 0)) {
+ // read power pin status
+ If (LEqual(DeRefOf(Index(PWRG, 0)),1)) { // GPIO mode
+ if (LEqual(\_SB.GGOV(DeRefOf(Index(PWRG, 2))), DeRefOf(Index(PWRG, 3)))) {
+ Return(0x01)
+ } Else {
+ Return(0x00)
+ }
+ }
+ }
+ Return(0x00) // disabled
+ } /// @defgroup sata_prt1_sta SATA Port 1 PowerResource _STA Method
+
+ Method(SPON, 0) {
+ If (LNotEqual(^OFTM, Zero)) { /// if OFTM != 0 => Disk was turned OFF by asl
+ Divide(Subtract(Timer(), ^OFTM), 10000, , Local0) ///- Store Elapsed time in ms
+ Store(Zero, ^OFTM) ///- Reset OFTM to zero to indicate minimum 50ms requirement does not apply when _ON called next time
+ If (LLess(Local0, 50)) ///- Do not sleep if already past the delay requirement
+ {
+ Sleep(Subtract(50, Local0)) ///- Sleep 50ms - time elapsed
+ }
+ }
+ // drive power pin "ON"
+ if (LNotEqual(DeRefOf(Index(PWRG, 0)),0)) { // if power gating enabled
+ if (LEqual(DeRefOf(Index(PWRG, 0)),1)) { // GPIO mode
+ \_SB.SGOV(DeRefOf(Index(PWRG, 2)),DeRefOf(Index(PWRG, 3)))
+ }
+ }
+ }
+
+ Method(SPOF, 0) {
+
+ Add(\_SB.PCI0.SATA.MBR6, PBAR, Local0)
+ /// if S0Ix enabled
+ If (LEqual(S0ID, 1)) {
+ OperationRegion(PSTS, SystemMemory, Local0, 0x18)
+ Field(PSTS, DWordAcc, NoLock, Preserve)
+ {
+ Offset(0x0),
+ CMST, 1, //PxCMD.ST
+ CSUD, 1, //PxCMD.SUD
+ , 2,
+ CFRE, 1, //PxCMD.FRE
+ Offset(0x10),
+ SDET, 4, //PxSSTS.DET
+ Offset(0x14),
+ CDET, 4 //PxSCTL.DET
+ }
+
+ // Execute offline flow only if Device detected and Phy not offline
+ If (LOr(LEqual(SDET, 1), LEqual(SDET, 3))) {
+
+ ///- Clear ST (PxCMD.ST)
+ Store(0, CMST) // PBAR[0]
+ ///- Clear FRE
+ Store(0, CFRE) // PBAR[4]
+ ///- Clear SUD (PxCMD.SUD)
+ Store(0, CSUD) // PBAR[1]
+ ///- Set DET to 4 (PxSCTL.DET)
+ Store(4, CDET) // PBAR+0x14[3:0]
+ Sleep(16)
+ ///- Wait until PxSSTS.DET == 4
+ While(LNotEqual(SDET, 4)){
+ Sleep(16)
+ }
+ }
+ } // if S0Ix enabled
+ // drive power pin "OFF"
+ If (LNotEqual(DeRefOf(Index(PWRG, 0)),0)) { // if power gating enabled
+ if (LEqual(DeRefOf(Index(PWRG, 0)),1)) { // GPIO mode
+ \_SB.SGOV(DeRefOf(Index(PWRG, 2)),Xor(DeRefOf(Index(PWRG, 3)),1))
+ }
+ }
+
+ Store(Timer(), ^OFTM) /// Store time when Disk turned OFF(non-zero OFTM indicate minimum 50ms requirement does apply when _ON called next time)
+ } // end _OFF
+
+ //
+ // Power Resource for RTD3 ZPODD
+ //
+ PowerResource(ODPR, 0, 0)
+ {
+ Method(_STA)
+ {
+ Return(ODSA())
+ }
+
+ Method(_ON)
+ {
+ ODON() // _ON Method
+ Sleep(800) // Delay for power ramp.
+ }
+
+ Method(_OFF)
+ {
+ ODOF() // _OFF Method
+ }
+
+ } // end PZPR
+
+ Method(ODSA)
+ {
+ // check power control enable
+ // read power pin status
+ If (LEqual(\_SB.GGOV(N_GPIO_22), 0x01)) {
+ Return(0x01)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ Method(ODON, 0)
+ {
+ // drive power pin "ON"
+ If (LAnd(LAnd(LAnd(And(RCG0, 0x01), 0x01), LGreaterEqual(\OSYS, 2012)), LEqual(PORT, 0))) {
+ Store (1, \_SB.GPO0.ODPW)
+ }
+ }
+
+ Method(ODOF, 0)
+ {
+ // drive power pin "OFF"
+ If (LAnd(LAnd(LAnd(And(RCG0, 0x01), 0x01), LGreaterEqual(\OSYS, 2012)), LEqual(PORT, 0))) {
+ Store (0, \_SB.GPO0.ODPW)
+ }
+ }
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtUsb.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtUsb.asl new file mode 100644 index 0000000000..f4e168f6b3 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtUsb.asl @@ -0,0 +1,63 @@ +/** @file
+ Power resource and wake capability for USB ports
+
+ Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ //
+ // Define _PR0, _PR3 PowerResource Package
+ //
+ Name (_PR0, Package(){UPPR})
+ Name (_PR3, Package(){UPPR})
+
+ PowerResource(UPPR, 0, 0)
+ {
+ Method(_STA)
+ {
+ Return(0x01)
+ }
+
+ Method(_ON)
+ {
+ }
+
+ Method(_OFF)
+ {
+ }
+ }
+
+ //
+ // _SxW, in Sx, the lowest power state supported to wake up the system
+ // _SxD, in Sx, the highest power state supported by the device
+ // If OSPM supports _PR3 (_OSC, Arg3[2]), 3 represents D3hot; 4 represents D3cold, otherwise 3 represents D3.
+ //
+ Method(_S0W, 0, Serialized)
+ {
+ Return(0x3) // return 3 (D3hot)
+ }
+ Method (_S3D, 0, Serialized)
+ {
+ Return (0x2)
+ }
+ Method (_S3W, 0, Serialized)
+ {
+ Return (0x3)
+ }
+ Method (_S4D, 0, Serialized)
+ {
+ Return (0x2)
+ }
+ Method (_S4W, 0, Serialized)
+ {
+ Return (0x3)
+ }
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtUsbWwan.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtUsbWwan.asl new file mode 100644 index 0000000000..787d7cd704 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3BxtUsbWwan.asl @@ -0,0 +1,90 @@ +/** @file
+ Power resource and wake capability for USB ports hosting WWAN module
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ // USB Port 3 power resource
+
+ PowerResource(PX03, 0, 0) {
+ Name(WOFF, 0) // Last OFF Time stamp (WOFF): The time stamp of the last power resource _OFF method evaluation
+
+ Method(_STA)
+ {
+ If (LEqual(\_SB.GGOV(NW_GPIO_78), 1)) {
+ Return(0x01)
+ } Else {
+ Return(0x00)
+ }
+ }
+
+ Method(_ON, 0) /// _ON Method
+ {
+ If (LNotEqual(^WOFF, Zero)) {
+ Divide(Subtract(Timer(), ^WOFF), 10000, , Local0) // Store Elapsed time in ms, ignore remainder
+ If (LLess(Local0,100)) { // If Elapsed time is less than 100ms
+ Sleep(Subtract(100,Local0)) // Sleep for the remaining time
+ }
+ }
+ \_SB.SGOV(NW_GPIO_78,1) // set power pin to high
+ \_SB.SGOV(NW_GPIO_117,1) // set reset pin to high
+ }
+
+ Method(_OFF, 0) /// _OFF Method
+ {
+ \_SB.SGOV(NW_GPIO_117,0) // set reset pin to low
+ \_SB.SGOV(NW_GPIO_78,0) // set power pin to low
+
+ Store(Timer(), ^WOFF) // Start OFF timer here.
+ }
+ } // End PX03
+
+ Name(_PR0,Package(){PX03}) // Power Resource required to support D0
+ Name(_PR2,Package(){PX03}) // Power Resource required to support D2
+ Name(_PR3,Package(){PX03}) // Power Resource required to support D3
+
+ //
+ // WWAN Modem device with the same power resource as its composite parent device
+ //
+ Device (MODM) {
+ Name(_ADR, 0x3)
+ Name(_PR0,Package(){PX03}) // Power Resource required to support D0
+ Name(_PR2,Package(){PX03}) // Power Resource required to support D2
+ Name(_PR3,Package(){PX03}) // Power Resource required to support D3
+ }
+
+ //
+ // _SxW, in Sx, the lowest power state supported to wake up the system
+ // _SxD, in Sx, the highest power state supported by the device
+ // If OSPM supports _PR3 (_OSC, Arg3[2]), 3 represents D3hot; 4 represents D3cold, otherwise 3 represents D3.
+ //
+ Method(_S0W, 0, Serialized)
+ {
+ Return(0x3) // return 3 (D3hot)
+ }
+ Method (_S3D, 0, Serialized)
+ {
+ Return (0x2)
+ }
+ Method (_S3W, 0, Serialized)
+ {
+ Return (0x3)
+ }
+ Method (_S4D, 0, Serialized)
+ {
+ Return (0x2)
+ }
+ Method (_S4W, 0, Serialized)
+ {
+ Return (0x3)
+ }
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3Common.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3Common.asl new file mode 100644 index 0000000000..0e95dd8774 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/Rtd3Common.asl @@ -0,0 +1,91 @@ +/** @file
+ ACPI RTD3 SSDT table
+
+ Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\_SB.OSCO)
+External(\_SB.PCI0, DeviceObj)
+
+External(\_SB.PCI0.RP01, DeviceObj)
+External(\_SB.PCI0.RP02, DeviceObj)
+External(\_SB.PCI0.RP03, DeviceObj)
+External(\_SB.PCI0.RP04, DeviceObj)
+External(\_SB.PCI0.RP05, DeviceObj)
+External(\_SB.PCI0.RP06, DeviceObj)
+External(\_SB.PCI0.RP01.VDID)
+External(\_SB.PCI0.RP02.VDID)
+External(\_SB.PCI0.RP03.VDID)
+External(\_SB.PCI0.RP04.VDID)
+External(\_SB.PCI0.RP05.VDID)
+External(\_SB.PCI0.RP06.VDID)
+External(\_SB.PCI0.SATA, DeviceObj)
+External(\_SB.PCI0.SATA.PRT0, DeviceObj)
+External(\_SB.PCI0.SATA.PRT1, DeviceObj)
+
+External(\_SB.PCI0.XHC, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB, DeviceObj)
+
+External(\_SB.PCI0.XHC.RHUB.HS01, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.HS02, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.HS03, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.HS04, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.HS05, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.HS06, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.HS07, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.HS08, DeviceObj)
+
+External(\_SB.PCI0.XHC.RHUB.SSP1, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.SSP2, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.SSP3, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.SSP4, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.SSP5, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.SSP6, DeviceObj)
+External(\_SB.PCI0.XHC.RHUB.SSP7, DeviceObj)
+
+External(\_SB.PCI0.XDCI, DeviceObj)
+
+External(\_SB.PCI0.SDHA, DeviceObj)
+External(\_SB.PCI0.SDIO, DeviceObj)
+
+External(\_SB.PCI0.PWM, DeviceObj)
+External(\_SB.PCI0.I2C0, DeviceObj)
+External(\_SB.PCI0.I2C1, DeviceObj)
+External(\_SB.PCI0.I2C2, DeviceObj)
+External(\_SB.PCI0.I2C3, DeviceObj)
+External(\_SB.PCI0.I2C4, DeviceObj)
+External(\_SB.PCI0.I2C5, DeviceObj)
+External(\_SB.PCI0.I2C6, DeviceObj)
+External(\_SB.PCI0.I2C7, DeviceObj)
+External(\_SB.PCI0.SPI1, DeviceObj)
+External(\_SB.PCI0.SPI2, DeviceObj)
+External(\_SB.PCI0.SPI3, DeviceObj)
+External(\_SB.PCI0.URT1, DeviceObj)
+External(\_SB.PCI0.URT2, DeviceObj)
+External(\_SB.PCI0.URT3, DeviceObj)
+External(\_SB.PCI0.URT4, DeviceObj)
+
+External(\GPRW, MethodObj)
+External(P8XH, MethodObj)
+External(XDST, IntObj)
+
+//
+// Externs common to ULT0RTD3.asl and FFRDRTD3.asl and exclude for BRRTD3.asl
+//
+
+// GPIO methods
+External(\_SB.GPC0, MethodObj)
+External(\_SB.SPC0, MethodObj)
+
+// IO expander methods
+// RTD3 devices and variables
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/RvpRtd3.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/RvpRtd3.asl new file mode 100644 index 0000000000..6ce5b22afa --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/SsdtRtd3/RvpRtd3.asl @@ -0,0 +1,841 @@ +/** @file
+ ACPI RTD3 SSDT table for APLK
+
+ Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+DefinitionBlock (
+ "Rtd3.aml",
+ "SSDT",
+ 2,
+ "AcpiRef",
+ "RVPRtd3",
+ 0x1000
+ )
+{
+External(RTD3, IntObj)
+External(EMOD, IntObj)
+External(RCG0, IntObj)
+External(RPA1, IntObj)
+External(RPA2, IntObj)
+External(RPA3, IntObj)
+External(RPA4, IntObj)
+External(RPA5, IntObj)
+External(RPA6, IntObj)
+External(\_SB.GPO0.AVBL, IntObj)
+External(\_SB.GPO0.ODPW, IntObj)
+External(\_SB.GGOV, MethodObj)
+External(\_SB.SGOV, MethodObj)
+External(OSYS)
+External(HGEN)
+External(S0ID)
+
+Include ("BxtPGpioDefine.asl")
+Include ("Rtd3Common.asl")
+
+//
+// PCIe root ports - START
+//
+ ///
+ /// PCIe RTD3 - SLOT#1
+ ///
+ Scope(\_SB.PCI0.RP01)
+ {
+ // reset pin = N_GPIO_13
+ // power pin = N_GPIO_17
+ // wake pin = SW_GPIO_207
+ // CLK_REQ = Mask Enable of Mapped CLKREQ# for CLKOUT_SRC2 (MSKCRQSRC2):
+ Name(SLOT, 1) // port #1
+
+ Name(RSTG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ N_GPIO_13, // GPIO pad #/IOEX pin #
+ 1 // reset pin de-assert polarity
+ })
+ Name(PWRG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ N_GPIO_17, // GPIO pad #/IOEX pin #
+ 1 // power on polarity
+ })
+ Name(WAKG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ SW_GPIO_207, // MSKCRQSRC2
+ 0 // wake en polarity
+ })
+ Name(SCLK, Package() {
+ 0, // 0-disable, 1-enable
+ W_GPIO_211, // MSKCRQSRC2
+ 0 // assert polarity, ICC should be LOW-activated
+ })
+
+ Include("Rtd3BxtPcie.asl")
+ }
+
+ ///
+ /// PCIe RTD3 - SLOT#2
+ ///
+ Scope(\_SB.PCI0.RP02)
+ {
+ Name (PCA2, 0)
+ // reset pin = N_GPIO_15
+ // power pin = N_GPIO_17
+ // wake pin = SW_GPIO_208
+ // CLK_REQ = Mask Enable of Mapped CLKREQ# for CLKOUT_SRC1 (MSKCRQSRC1):
+ Name(SLOT, 2) // port #2
+
+ Name(RSTG, Package() {
+ 1, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ N_GPIO_15, // GPIO pad #/IOEX pin #
+ 1 // reset pin de-assert polarity
+ })
+ Name(PWRG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ N_GPIO_17, // GPIO pad #/IOEX pin #
+ 1 // power on polarity
+ })
+ Name(WAKG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ SW_GPIO_208, // GPIO pad #/IOEX pin #
+ 1 // wake en polarity
+ })
+ Name(SCLK, Package() {
+ 1, // 0-disable, 1-enable
+ W_GPIO_212, // MSKCRQSRC1
+ 0 // assert polarity, ICC should be LOW-activated
+ })
+
+ Include("Rtd3BxtPcie.asl")
+ }
+
+ ///
+ /// PCIe RTD3 - SLOT#3
+ ///
+ If (LEqual (HGEN, 0)) {
+ Scope(\_SB.PCI0.RP03)
+ {
+ Name (PCA3, 0)
+ // reset pin = W_GPIO_152
+ // power pin = N_GPIO_19
+ // wake pin = SW_GPIO_205
+ // CLK_REQ = W_GPIO_209
+ Name(SLOT, 3) // port #3
+
+ Name(RSTG, Package() {
+ 1, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ W_GPIO_152, // GPIO pad #/IOEX pin #
+ 1 // reset pin de-assert polarity
+ })
+ Name(PWRG, Package() {
+ 1, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ N_GPIO_19, // GPIO pad #/IOEX pin #
+ 1 // power on polarity
+ })
+ Name(WAKG, Package() {
+ 1, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ SW_GPIO_205, // GPIO pad #/IOEX pin #
+ 1 // wake en polarity
+ })
+ Name(SCLK, Package() {
+ 1, // 0-disable, 1-enable
+ W_GPIO_209, // MSKCRQSRCx
+ 0 // assert polarity, ICC should be LOW-activated
+ })
+ Include("Rtd3BxtPcie.asl")
+ }
+ }
+
+ ///
+ /// PCIe RTD3 - SLOT#4
+ ///
+ Scope(\_SB.PCI0.RP04)
+ {
+ Name (PCA4, 0)
+ // reset pin = none
+ // power pin = none
+ // wake pin = none
+ // CLK_REQ = Mask Enable of Mapped CLKREQ# for CLKOUT_SRC5 (MSKCRQSRC5)
+ Name(SLOT, 4) ///- Slot #4
+
+ Name(RSTG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // reset pin de-assert polarity
+ })
+ Name(PWRG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // power on polarity
+ })
+ Name(WAKG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // wake en polarity
+ })
+ Name(SCLK, Package() {
+ 0, // 0-disable, 1-enable
+ 0, // MSKCRQSRC5
+ 0 // assert polarity, ICC should be LOW-activated
+ })
+
+ Include("Rtd3BxtPcie.asl")
+ }
+
+ ///
+ /// PCIe RTD3 - SLOT#5
+ ///
+ Scope(\_SB.PCI0.RP05)
+ {
+ Name (PCA5, 0)
+ // reset pin = none
+ // power pin = none
+ // wake pin = none
+ // CLK_REQ = Mask Enable of Mapped CLKREQ# for CLKOUT_SRC4 (MSKCRQSRC4)
+ Name(SLOT, 5) ///- port #5
+
+ Name(RSTG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // reset pin de-assert polarity
+ })
+ Name(PWRG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // power on polarity
+ })
+ Name(WAKG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // wake en polarity
+ })
+ Name(SCLK, Package() {
+ 0, // 0-disable, 1-enable
+ 0, // MSKCRQSRC4
+ 0 // assert polarity, ICC should be LOW-activated
+ })
+
+ Include("Rtd3BxtPcie.asl")
+ }
+
+ ///
+ /// PCIe RTD3 - SLOT#6
+ ///
+ Scope(\_SB.PCI0.RP06)
+ {
+ Name (PCA6, 0)
+ // reset pin = none
+ // power pin = none
+ // wake pin = none
+ // CLK_REQ = Mask Enable of Mapped CLKREQ# for CLKOUT_SRC4 (MSKCRQSRC4)
+ Name(SLOT, 6) ///- port #6
+
+ Name(RSTG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // reset pin de-assert polarity
+ })
+ Name(PWRG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // power on polarity
+ })
+ Name(WAKG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // wake en polarity
+ })
+ Name(SCLK, Package() {
+ 0, // 0-disable, 1-enable
+ 0, // MSKCRQSRC4
+ 0 // assert polarity, ICC should be LOW-activated
+ })
+
+ Include("Rtd3BxtPcie.asl")
+ }
+//
+// PCIe root ports - END
+//
+
+//
+// SATA - START
+//
+
+ Scope(\_SB.PCI0.SATA) {
+
+ OperationRegion (PMCS, PCI_Config, 0x74, 0x4)
+ Field (PMCS, WordAcc, NoLock, Preserve) {
+ PMSR, 32, // 0x74, PMCSR - Power Management Control and Status
+ }
+
+ /// _PS0 Method for SATA HBA
+ Method(_PS0,0,Serialized)
+ {
+
+ }
+
+ /// _PS3 Method for SATA HBA
+ Method(_PS3,0,Serialized)
+ {
+ }
+
+ /// Define SATA PCI Config OperationRegion
+ OperationRegion(SMIO,PCI_Config,0x24,4)
+ Field(SMIO,AnyAcc, NoLock, Preserve) {
+ Offset(0x00), ///- SATA MABR6
+ MBR6, 32, ///- SATA ABAR
+ }
+
+ Scope(PRT0) {
+ // Define _PR0, _PR3 PowerResource Package
+ // P0 command port = ABAR + 0x118
+ // power pin = N_GPIO_22
+ Name(PORT, 0)
+ Name(PBAR, 0x118) // port0 command port address
+ Name(PWRG, Package() {
+ 1, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // GPIO group #/IOEX #
+ N_GPIO_22, // GPIO pad #/IOEX pin #
+ 1 // power on polarity
+ })
+ Include("Rtd3BxtSata.asl")
+ } // end device(PRT0)
+
+ Scope(PRT1) {
+ // Define _PR0, _PR3 PowerResource Package
+ // P1 command port = ABAR + 0x198
+ // power pin = none
+ Name(PORT, 1)
+ Name(PBAR, 0x198) // port1 command port address
+ Name(PWRG, Package() {
+ 0, // 0-disable, 1-enable GPIO, 2-enable IOEX(IO Expander)
+ 0, // GPIO group #/IOEX #
+ 0, // GPIO pad #/IOEX pin #
+ 0 // power on polarity
+ })
+ Include("Rtd3BxtSata.asl")
+ } // end device(PRT1)
+
+ ///
+ /// _DSM Device Specific Method supporting AHCI DEVSLP
+ ///
+ /// Arg0: UUID Unique function identifier \n
+ /// Arg1: Integer Revision Level \n
+ /// Arg2: Integer Function Index \n
+ /// Arg3: Package Parameters \n
+ ///
+ /// Variables:
+ Name(DRV, 0) /// Storage for _DSM Arg3 parameter 0
+ Name(PWR, 0) /// Storage for _DSM Arg3 parameter 1
+
+ Method (_DSM, 4, Serialized, 0, UnknownObj, {BuffObj, IntObj, IntObj, PkgObj}) {
+
+ /// Check UUID of _DSM defined by Microsoft
+ If (LEqual(Arg0, ToUUID ("E4DB149B-FCFE-425b-A6D8-92357D78FC7F"))) {
+ ///
+ /// Switch by function index
+ ///
+ Switch (ToInteger(Arg2)) {
+ Case (0) { /// case 0:
+ ///- Standard query - A bitmask of functions supported
+ ///- Supports function 0-3
+ Return(0x0f)
+ }
+ Case (1) { /// case 1:
+ ///- Query Device IDs (Addresses) of children where drive power and/or DevSleep are supported.
+ ///- SATA HBA provides autonomous link (DevSleep) support, return a package of 0 elements
+ Return( Package(){}) ///- SATA HBA provides native DevSleep
+ }
+ Case (2) { /// Case 2: Control power to device.
+ Store(ToInteger(DerefOf(Index(Arg3, Zero))), DRV)
+ Store(ToInteger(DerefOf(Index(Arg3, One))), PWR)
+
+ Switch(ToInteger(DRV)){
+ Case (0x0000FFFF){
+ If (LAnd(LAnd(And(RCG0, 0x01), 0x01), LGreaterEqual(\OSYS, 2012))) {
+ ///- Turn on drive and link power to all drives. Note that even though
+ If(PWR){ // Applying Power
+ \_SB.PCI0.SATA.PRT0.ODPR._ON() ///- apply power to port 0
+ }
+ } Else {
+ If(PWR){ // Applying Power
+ \_SB.PCI0.SATA.PRT0.SPPR._ON() ///- apply power to port 0
+ }
+ }
+ }
+ } //Switch(DRV)
+ Return (0)
+ } //Case (2)
+ Case (3){ /// Case 3: Current status of Device/Link of Port
+ Store(ToInteger(DerefOf(Index(Arg3, Zero))), DRV)
+ Switch(ToInteger(DRV)){ /// Check for SATA port
+ Case (0x0000FFFF) { ///- SATA Port 0
+ ///- Bit0 => Device power state
+ If (LAnd(LAnd(And(RCG0, 0x01), 0x01), LGreaterEqual(\OSYS, 2012))) {
+ If(LEqual(\_SB.PCI0.SATA.PRT0.ODPR._STA(), 0)){
+ Store(0, Local0)
+ }Else{
+ Store(1, Local0)
+ }
+ } Else {
+ ///- Bit0 => Device power state
+ If (LEqual(\_SB.PCI0.SATA.PRT0.SPPR._STA(), 0)){
+ Store(0, Local0)
+ } Else {
+ Store(1, Local0)
+ }
+ }
+ Return (Local0)
+ }
+ Case (0x0001FFFF){ ///- SATA Port 1
+ ///- Bit0 => Device power state
+ If (LEqual(\_SB.PCI0.SATA.PRT1.SPPR._STA(), 0)) {
+ Store(0, Local0)
+ } Else {
+ Store(1, Local0)
+ }
+ Return (Local0)
+ }
+ Default { ///- Invalid SATA Port - error
+ Return (Ones)
+ }
+ }
+ }
+ Default {
+ Return (0)
+ }
+ }
+ } Else { // UUID does not match
+ Return (0)
+ }
+ } /// @defgroup sata_dsm SATA _DSM Method
+
+ } //Scope(\_SB.PCI0.SATA)
+//
+// SATA - END
+//
+
+ Scope(\_SB.PCI0.XHC.RHUB) { //USB XHCI RHUB
+ //
+ // No specific power control (GPIO) to USB connectors (p2/p4/p5),
+ // declare power resource with null functions and specify its wake ability
+ // Please refer to ACPI 5.0 spec CH7.2
+ //
+ Scope (HS02) {
+ Name(PORT, 2)
+ Include ("Rtd3BxtUsb.asl")
+ }
+ Scope (SSP2) {
+ Name(PORT, 10)
+ Include ("Rtd3BxtUsb.asl")
+ }
+
+ Scope (HS04) {
+ Name(PORT, 4)
+ Include ("Rtd3BxtUsb.asl")
+ }
+ Scope (SSP4) {
+ Name(PORT, 12)
+ Include ("Rtd3BxtUsb.asl")
+ }
+
+ Scope (HS05) {
+ Name(PORT, 5)
+ Include ("Rtd3BxtUsb.asl")
+ }
+ Scope (SSP5) {
+ Name(PORT, 13)
+ Include ("Rtd3BxtUsb.asl")
+ }
+
+ ///
+ /// WWAN RTD3 support, associate _PR0, PR2, PR3 for USB High speed Port 3
+ Scope (HS03) {
+ Name(PORT, 3)
+ Include ("Rtd3BxtUsbWwan.asl")
+ }
+
+ } // RHUB
+
+ Scope(\_SB){
+ PowerResource(SDPR, 0, 0) {
+ Name(_STA, One)
+ Method(_ON, 0, Serialized) {
+
+ }
+
+ Method(_OFF, 0, Serialized) {
+
+ }
+
+ } //End of PowerResource(SDPR, 0, 0)
+ } //End of Scope(\_SB)
+
+ Scope(\_SB.PCI0.SDHA)
+ {
+
+ Name(_PR0, Package(){SDPR}) // TBD
+ Name(_PR3, Package(){SDPR}) // TBD
+ } //Scope(\_SB.PCI0.SDHA)
+
+ Scope(\_SB.PCI0.SDIO)
+ {
+
+ Name(_PR0, Package(){SDPR}) // TBD
+ Name(_PR3, Package(){SDPR}) // TBD
+ } //Scope(\_SB.PCI0.SDIO)
+
+ Scope(\_SB)
+ {
+ //
+ // Dummy power resource for USB D3 cold support
+ //
+ PowerResource(USBC, 0, 0)
+ {
+ Method(_STA) { Return (0x1) }
+ Method(_ON) {}
+ Method(_OFF) {}
+ }
+ }
+
+ Scope(\_SB.PCI0.XDCI)
+ {
+ Method (_RMV, 0, NotSerialized) // _RMV: Removal Status
+ {
+ Return (Zero)
+ }
+
+ Method (_PR3, 0, NotSerialized) // _PR3: Power Resources for D3hot
+ {
+ Return (Package (0x01)
+ {
+ USBC // return dummy package
+ })
+ }
+
+ OperationRegion (PMCS, PCI_Config, 0x74, 0x4)
+ Field (PMCS, WordAcc, NoLock, Preserve) {
+ PMSR, 32, // 0x74, PMCSR - Power Management Control and Status
+ }
+
+ Method (_PS0, 0, NotSerialized) { // _PS0: Power State 0
+ }
+
+ Method (_PS3, 0, NotSerialized) { // _PS3: Power State 3
+ //
+ // dummy read PMCSR
+ //
+
+ Store (PMSR, Local0)
+ And (Local0, 1, Local0) // Dummy operation on Local0
+ }
+ } // Scope(\_SB.PCI0.XDCI)
+
+//
+// XDCI - end
+//
+
+//Power Resource for Audio Codec
+ Scope(\_SB.PCI0)
+ {
+ PowerResource(PAUD, 0, 0) {
+
+ /// Namespace variable used:
+ Name(PSTA, One) /// PSTA: Physical Power Status of Codec 0 - OFF; 1-ON
+ Name(ONTM, Zero) /// ONTM: 0 - Not in Speculative ON ; Non-Zero - elapsed time in Nanosecs after Physical ON
+
+ Name(_STA, One) /// _STA: PowerResource Logical Status 0 - OFF; 1-ON
+
+ ///@defgroup pr_paud Power Resource for onboard Audio CODEC
+
+ Method(_ON, 0){ /// _ON method \n
+
+ Store(One, _STA) ///- Set Logocal power state
+ PUAM() ///- Call PUAM() to tansition Physical state to match current logical state
+ ///@addtogroup pr_paud
+ } // End _ON
+
+ Method(_OFF, 0){ /// _OFF method \n
+
+ Store(Zero, _STA) ///- Set the current power state
+ PUAM() ///- Call PUAM() to tansition Physical state to match current logical state
+ ///@addtogroup pr_paud
+ } // End _OFF
+
+ /// PUAM - Power Resource User Absent Mode for onboard Audio CODEC
+ /// Arguments:
+ ///
+ /// Uses:
+ /// _STA - Variable updated by Power Resource _ON/_OFF methods \n
+ /// \\UAMS - Variable updated by GUAM method to show User absent present \n
+ /// ONTM - Local variable to store ON time during Speculative ON \n
+ /// ______________________________
+ // | Inputs | Outputs |
+ // ______________________________
+ // | _STA | \UAMS | GPIO | ONTM |
+ // ______________________________
+ // | 1 | 0 | ON | !0 |
+ // | 1 | !0 | ON | !0 |
+ // | 0 | 0 | ON | !0 |
+ // | 0 | !0 | OFF | 0 |
+ // ______________________________
+ /**
+ <table>
+ <tr> <th colspan="2"> Inputs <th colspan="2"> Output
+ <tr> <th>_STA <th> \\UAMS <th> GPIO <th>ONTM
+ <tr> <td>1 <td>0 <td>ON <td>!0
+ <tr> <td>1 <td>!0<td>ON <td>!0
+ <tr> <td>0 <td>0 <td>ON <td>!0
+ <tr> <td>0 <td>!0<td>OFF<td> 0
+ </table>
+ **/
+ ///@addtogroup pr_paud_puam
+ Method(PUAM, 0, Serialized)
+ {
+ If (LEqual(^_STA, Zero)) {
+ } Else { /// New state = ON (_STA=1) or (_STA=0 and \UAMS=0)
+ }
+ } //PUAM
+ } //PAUD
+ } //Scope(\_SB.PCI0)
+//Power Resource for Audio Codec End
+
+// I2C1 - TouchPanel Power control
+
+//Serial IO End
+
+ // Modern Standby N:1 Power Resource definition. Place Holder.
+ If (LEqual(\EMOD, 1)) {
+ Scope(\_SB){
+ Name(GBPS, 0) // Power state flag for Modern Standby. Initial value = 1 (On).
+ PowerResource(MODS, 0, 0){ /// Modern Standby Power Resource
+
+ Method(_STA) { /// _STA method
+ If (LGreaterEqual(OSYS, 2015)) {
+ Return(GBPS)
+ }
+ Return(0)
+ }
+
+ Method(_ON, 0) { /// _ON Method
+ If (LGreaterEqual(OSYS, 2015)) {
+ \_SB.PCI0.SATA.PRT0.SPON()
+ Store(1, GBPS) // Indicate devices are ON
+ }
+ }
+
+ Method(_OFF, 0) { /// _OFF Method
+ If (LGreaterEqual(OSYS, 2015)) {
+ \_SB.PCI0.SATA.PRT0.SPOF()
+ Store(0, GBPS)
+ }
+ }
+ } // End MODS
+ } // \_SB
+ } // End If ((LEqual(EMOD, 1))
+
+ Scope(\_SB.PCI0) {
+ Method(LPD3, 0, Serialized) {
+ //
+ // Memory Region to access to the PCI Configuration Space
+ // and dummy read PMCSR
+ //
+ OperationRegion (PMCS, PCI_Config, 0x84, 0x4)
+ Field (PMCS, WordAcc, NoLock, Preserve) {
+ PMSR, 32, // 0x84, PMCSR - Power Management Control and Status
+ }
+ //
+ // Dummy PMCSR read
+ //
+ Store (PMSR, Local0)
+ And (Local0, 1, Local0) // Dummy operation on Local0
+ }
+
+ PowerResource (LSPR, 0, 0) {
+ //
+ // LPSS Power Resource
+ //
+ Name (_STA, One)
+ Method (_ON, 0, Serialized) {
+
+ }
+
+ Method (_OFF, 0, Serialized) {
+
+ }
+ } //End of PowerResource(SDPR, 0, 0)
+ }
+
+ Scope(\_SB.PCI0.PWM)
+ {
+ //
+ // Dummy Power Resource declaration
+ //
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.PWM)
+
+ Scope(\_SB.PCI0.I2C0)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C0)
+
+ Scope(\_SB.PCI0.I2C1)
+ {
+ //
+ // Dummy Power Resource declaration
+ //
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C1)
+
+ Scope(\_SB.PCI0.I2C2)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C2)
+
+ Scope(\_SB.PCI0.I2C3)
+ {
+ //
+ // Dummy Power Resource declaration
+ //
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C3)
+
+ Scope(\_SB.PCI0.I2C4)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C4)
+
+ Scope(\_SB.PCI0.I2C5)
+ {
+ //
+ // Dummy Power Resource declaration
+ //
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C5)
+
+ Scope(\_SB.PCI0.I2C6)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C6)
+
+ Scope(\_SB.PCI0.I2C7)
+ {
+ //
+ // Dummy Power Resource declaration
+ //
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.I2C7)
+
+ Scope(\_SB.PCI0.SPI1)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.SPI1)
+
+ Scope(\_SB.PCI0.SPI2)
+ {
+ //
+ // Dummy Power Resource declaration
+ //
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.SPI2)
+
+ Scope(\_SB.PCI0.SPI3)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.SPI3)
+
+ Scope(\_SB.PCI0.URT1)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.URT1)
+
+ Scope(\_SB.PCI0.URT2)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) { LPD3 () }
+ } //Scope(\_SB.PCI0.URT2)
+
+ Scope(\_SB.PCI0.URT3)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.URT3)
+
+ Scope(\_SB.PCI0.URT4)
+ {
+ Name(_PR0, Package(){LSPR}) // TBD
+ Name(_PR3, Package(){LSPR}) // TBD
+ Method (_PS0) { }
+ Method (_PS3) {LPD3 ()}
+ } //Scope(\_SB.PCI0.URT4)
+
+} // End SSDT
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/THERMAL.ASL b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/THERMAL.ASL new file mode 100644 index 0000000000..fcba18c153 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/THERMAL.ASL @@ -0,0 +1,201 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Scope(\_TZ)
+{
+ //
+ // Memory window to MCHBAR+7000h.
+ //
+ OperationRegion (MBAR, SystemMemory, Add(ShiftLeft(\_SB.PCI0.VLVC.MHBR,15),0x7000), 0x100)
+ Field (MBAR, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x1C), // P_CR_PKG_THERM_STATUS_0_0_0_MCHBAR (MCHBAR+0x701C)
+ , 1, // THRESHOLD1_STATUS[0]
+ , 1, // THRESHOLD1_LOG[1]
+ , 1, // THRESHOLD2_STATUS[2]
+ , 1, // THRESHOLD2_LOG[3]
+ , 1, // CRITICAL_THERMAL_EVENT_STATUS[4]
+ , 1, // CRITICAL_THERMAL_EVENT_LOG[5]
+ , 10, // RESERVED[15:6]
+ PKGT, 8, // TEMPERATURE[23:16]
+ }
+
+ // Notes:
+ // 1) WIN2K strictly uses interrupt driven thermal events.
+ // 2) Temperature values are stored in tenths of Kelvin to eliminate the decimal place.
+ // 3) Kelvin = Celsius + 273.2.
+ // 4) All temperature must be >= 289K.
+
+ // Flag to indicate Legacy thermal control.
+ // 1 = Legacy thermal control
+ // 0 = other thermal control, like DPTF
+ Name(LEGA, 1) // for Active Policy
+ Name(LEGP, 1) // for Passive Policy
+ Name(LEGC, 1) // for Critical Policy
+
+ // Fan 0 = Package Processor Fan.
+
+ PowerResource(FN00,0,0)
+ {
+ // Return Virtual Fan 0 status.
+ //
+ Method(_STA,0,Serialized)
+ {
+ Return(0x0F)
+ }
+
+ Name(FANS,0) // Fan State: 1=ON, 0=OFF
+
+ Method(FCTL,1,Serialized)
+ {
+
+ }
+
+ Method(_ON,0,Serialized)
+ {
+ // If EC access is enabled.
+ If (\_TZ.LEGA) {
+ Store(1,FANS) // save fan state as on
+ FCTL(100)
+ }
+ }
+
+ Method(_OFF,0,Serialized)
+ {
+ // If EC access is enabled.
+ If (\_TZ.LEGA) {
+ Store(0,FANS) // save fan state as off
+ FCTL(0)
+ }
+ }
+ }
+
+ // Associate Virtual Fan 0 Power Resource with the FAN0 Device.
+ //
+ Device(FAN0)
+ {
+ Name(_HID, EISAID("PNP0C0B"))
+ Name(_UID,0)
+ Name(_PR0, Package(1){FN00})
+ }
+
+ // Thermal Zone 1 = DTS Thermal Zone.
+ //
+ ThermalZone(TZ01)
+ {
+ // Return the temperature at which the OS initiates Active Cooling.
+ //
+ Method(_AC0,0,Serialized)
+ {
+ If (LEqual(\_TZ.LEGA,0)) { Return(Add(2732,Multiply(210,10)))} // 210 degree C
+ Return(Add(2732,Multiply(ACTT,10)))
+ }
+
+ // Returns the Device to turn on when _ACx is exceeded.
+ //
+ Name(_AL0, Package(1){FAN0})
+
+ // Return the temperature at which the OS must perform a Critcal Shutdown.
+ //
+ Method(_CRT,0,Serialized)
+ {
+ If (LEqual(\_TZ.LEGC,0)) { Return(Add(2732,Multiply(210,10)))} // 210 degree C
+ Return(Add(2732,Multiply(\CRTT,10)))
+ }
+
+ // Notifies ASL Code the current cooling mode.
+ // 0 - Active cooling
+ // 1 - Passive cooling
+ //
+ Method(_SCP,1,Serialized)
+ {
+ Store(Arg0,\CTYP)
+ }
+
+ // _TMP (Temperature)
+ //
+ // Return the highest of the CPU temperatures to the OS.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // An Integer containing the current temperature of the thermal zone (in tenths of degrees Kelvin)
+ //
+ Method(_TMP,0,Serialized)
+ {
+ //
+ // DTS Enabled Case
+ //
+ If (DTSE) {
+ //
+ // If DTS support is enabled, simply return the
+ // higher of the two DTS Temperatures.
+ If (LGreaterEqual(DTS1, DTS2)) {
+ Return(Add(2732, Multiply(DTS1, 10)))
+ }
+ Return(Add(2732, Multiply(DTS2, 10)))
+ }
+ //
+ // Max Platform temperature returned by EC
+ //
+ Else{
+ Return (Add(2732,Multiply(PKGT,10))) // this depends on EC sending a SCI every second to simulate polling.
+ }
+ } // End of _TMP
+
+ // Return the Processor(s) used for Passive Cooling.
+ //
+ Method(_PSL,0,Serialized)
+ {
+ If (LEqual(MPEN, 4)) {
+ // CMP - Throttling controls all four logical CPUs.
+ Return(Package(){\_PR.CPU0,\_PR.CPU1,\_PR.CPU2,\_PR.CPU3})
+ }
+ If (MPEN) {
+ // CMP - Throttling controls both CPUs.
+ Return(Package(){\_PR.CPU0,\_PR.CPU1})
+ }
+ Return(Package(){\_PR.CPU0})
+ }
+
+ // Returns the temperature at which the OS initiates CPU throttling.
+ //
+ Method(_PSV,0,Serialized)
+ {
+ If (LEqual(\_TZ.LEGP,0)){ Return(Add(2732,Multiply(110,10)))} // 110 degree C
+ Return(Add(2732,Multiply(\PSVT,10)))
+ }
+
+ // Returns TC1 value used in the passive cooling formula.
+ //
+ Method(_TC1,0,Serialized)
+ {
+ Return(\TC1V)
+ }
+
+ // Returns TC2 value used in the passive cooling formula.
+ //
+ Method(_TC2,0,Serialized)
+ {
+ Return(\TC2V)
+ }
+
+ // Returns the sampling period used in the passive cooling formula.
+ //
+ Method(_TSP,0,Serialized)
+ {
+ Return(\TSPV)
+ }
+
+ }// end ThermalZone(TZ01)
+} // end Scope(\_TZ)
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/UsbSbd.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/UsbSbd.asl new file mode 100644 index 0000000000..eb18763a90 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/UsbSbd.asl @@ -0,0 +1,68 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+//
+// _DSM : Device Specific Method supporting USB Sideband Deferring function
+//
+// Arg0: UUID Unique function identifier
+// Arg1: Integer Revision Level
+// Arg2: Integer Function Index
+// Arg3: Package Parameters
+//
+Method (_DSM, 4, Serialized, 0, UnknownObj, {BuffObj, IntObj, IntObj, PkgObj})
+{
+ If (LEqual(Arg0, ToUUID ("A5FC708F-8775-4BA6-BD0C-BA90A1EC72F8"))) {
+ //
+ // Switch by function index
+ //
+ Switch (ToInteger(Arg2))
+ {
+ //
+ // Standard query - A bitmask of functions supported
+ // Supports function 0-2
+ //
+ Case (0)
+ {
+ if (LEqual(Arg1, 1)) { // test Arg1 for the revision
+ Return (Buffer () {0x07})
+ } else {
+ Return (Buffer () {0})
+ }
+ }
+ //
+ // USB Sideband Deferring Support
+ // 0: USB Sideband Deferring not supported on this device
+ // 1: USB Sideband Deferring supported
+ //
+ Case (1)
+ {
+ if (LEqual(SDGV,0xFF)) { // check for valid GPE vector
+ Return (0)
+ } else {
+ Return (1)
+ }
+ }
+ //
+ // GPE Vector
+ // Return the bit offset within the GPE block of the GPIO (HOST_ALERT) driven by this device
+ //
+ Case (2)
+ {
+ Return (SDGV)
+ }
+ }
+ }
+
+ Return (0)
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/UsbTypeC/UsbTypeC.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/UsbTypeC/UsbTypeC.asl new file mode 100644 index 0000000000..c7bce84bd5 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/UsbTypeC/UsbTypeC.asl @@ -0,0 +1,148 @@ +/** @file
+ ACPI DSDT table for USB Type C.
+
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+DefinitionBlock (
+ "UsbC.aml",
+ "SSDT",
+ 2,
+ "Intel_",
+ "UsbCTabl",
+ 0x1000
+ )
+{
+
+ External(UBCB)
+ External(P8XH, MethodObj)
+ External(BID, IntObj) // BoardId
+ External(\_SB.PCI0.XHC.RHUB, DeviceObj)
+ External(\_SB.PCI0.XHC.RHUB.TPLD, MethodObj)
+ External(\_SB.PCI0.XHC.RHUB.TUPC, MethodObj)
+ External(ETYC, IntObj)
+
+ Scope (\_SB)
+ {
+ Device(UBTC) // USB type C device
+ {
+ Name (_HID, EISAID("USBC000"))
+ Name (_CID, EISAID("PNP0CA0"))
+ Name (_UID, 0)
+ Name (_DDN, "USB Type C")
+ Name (_ADR, 0x0)
+
+
+ Name (CRS, ResourceTemplate () {
+ Memory32Fixed (ReadWrite, 0x00000000, 0x1000, USBR)
+ })
+
+ Device (CR01) // USB Type C Connector
+ {
+ Name (_ADR, 0x0)
+ Method (_PLD) { Return ( \_SB.PCI0.XHC.RHUB.TPLD(1,1) ) }
+ }
+
+ Method(_CRS,0, Serialized)
+ {
+ CreateDWordField (CRS, \_SB.UBTC.USBR._BAS, CBAS)
+ Store (UBCB, CBAS)
+ Return(CRS)
+ }
+
+ Method(_STA,0)
+ {
+ If (LEqual (ETYC, 1)) {
+ Return(0xF)
+ }
+ Return(0x0)
+ }
+
+ OperationRegion (USBC, SystemMemory, UBCB, 0x38) // 56 bytes Opm Buffer
+ Field(USBC,ByteAcc,Lock,Preserve)
+ {
+ VER1, 8,
+ VER2, 8,
+ RSV1, 8,
+ RSV2, 8,
+ Offset(4),
+ CCI0, 8, // PPM->OPM CCI indicator
+ CCI1, 8,
+ CCI2, 8,
+ CCI3, 8,
+
+ CTL0, 8, // OPM->PPM Control message
+ CTL1, 8,
+ CTL2, 8,
+ CTL3, 8,
+ CTL4, 8,
+ CTL5, 8,
+ CTL6, 8,
+ CTL7, 8,
+
+ // USB Type C Mailbox Interface
+ MGI0, 8, // PPM->OPM Message In
+ MGI1, 8,
+ MGI2, 8,
+ MGI3, 8,
+ MGI4, 8,
+ MGI5, 8,
+ MGI6, 8,
+ MGI7, 8,
+ MGI8, 8,
+ MGI9, 8,
+ MGIA, 8,
+ MGIB, 8,
+ MGIC, 8,
+ MGID, 8,
+ MGIE, 8,
+ MGIF, 8,
+
+ MGO0, 8, // OPM->PPM Message Out
+ MGO1, 8,
+ MGO2, 8,
+ MGO3, 8,
+ MGO4, 8,
+ MGO5, 8,
+ MGO6, 8,
+ MGO7, 8,
+ MGO8, 8,
+ MGO9, 8,
+ MGOA, 8,
+ MGOB, 8,
+ MGOC, 8,
+ MGOD, 8,
+ MGOE, 8,
+ MGOF, 8,
+
+ } // end of Field
+
+ Method (_DSM, 4, Serialized, 0, UnknownObj, {BuffObj, IntObj, IntObj, PkgObj} )
+ {
+ // Compare passed in UUID with supported UUID.
+ If (LEqual(Arg0, ToUUID ("6f8398c2-7ca4-11e4-ad36-631042b5008f"))) {
+ // UUID for USB type C
+ Switch (ToInteger(Arg2)) // Arg2: 0 for query, 1 for write and 2 for read
+ {
+ Case (0)
+ {
+ Return (Buffer() {0x07}) // 2 functions defined other than Query.
+ }
+
+ } // End switch
+ } // End UUID check
+ Return (0)
+ } // End _DSM Method
+ } // end of Device
+ } // end \_SB scope
+} // end SSDT
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Video.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Video.asl new file mode 100644 index 0000000000..d9151b89d3 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Video.asl @@ -0,0 +1,32 @@ +/** @file
+ Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+External(\_SB.PCI0.GFX0.DD1F)
+
+// Brightness Notification:
+// Generate a brightness related notification
+// to the LFP if its populated.
+//
+// Arguments:
+// Arg0: Notification value.
+//
+// Return Value:
+// None
+
+Method(BRTN,1,Serialized)
+{
+ If (LEqual(And(DIDX,0x0F00),0x400)) {
+ Notify(\_SB.PCI0.GFX0.DD1F,Arg0)
+ }
+}
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wifi.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wifi.asl new file mode 100644 index 0000000000..3a2e444f4d --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wifi.asl @@ -0,0 +1,57 @@ +/** @file
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+ OperationRegion(RPXX, PCI_Config, 0x00, 0x10)
+ Field(RPXX, AnyAcc, NoLock, Preserve)
+ {
+ Offset(0), // Vendor-Device ID
+ VDID, 32,
+ }
+
+ // WIST (WiFi Device Presence Status)
+ //
+ // Check if a WiFi Device is present on the RootPort.
+ //
+ // Arguments: (0)
+ // None
+ // Return Value:
+ // 0 - if a device is not present.
+ // 1 - if a device is present.
+ //
+ Method(WIST,0,Serialized)
+ {
+ // check Vendor-Device ID for supported devices
+ If (CondRefOf(VDID)) {
+ Switch (ToInteger(VDID)) {
+ // Wifi devices
+ Case(0x095A8086){Return(1)} // StonePeak
+ Case(0x095B8086){Return(1)} // StonePeak
+ Case(0x31658086){Return(1)} // StonePeak 1x1
+ Case(0x31668086){Return(1)} // StonePeak 1x1
+ Case(0x08B18086){Return(1)} // WilkinsPeak
+ Case(0x08B28086){Return(1)} // WilkinsPeak
+ Case(0x08B38086){Return(1)} // WilkinsPeak
+ Case(0x08B48086){Return(1)} // WilkinsPeak
+ Case(0x24F38086){Return(1)} // SnowfieldPeak
+ Case(0x24F48086){Return(1)} // SnowfieldPeak
+ Case(0x24F58086){Return(1)} // SnF/LnP/DgP SKUs
+ Case(0x24F68086){Return(1)} // SnF/LnP/DgP SKUs
+ Case(0x24FD8086){Return(1)} // Windstorm Peak
+ Case(0x24FB8086){Return(1)} // Sandy Peak
+ Default{Return(0)} // no supported device
+ }
+ } Else {
+ Return(0)
+ }
+ }
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wsmt/WSMT.h b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wsmt/WSMT.h new file mode 100644 index 0000000000..5c45a1a7b9 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wsmt/WSMT.h @@ -0,0 +1,57 @@ +/** @file
+ This file describes WSMT table.
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+typedef struct {
+ UINT32 Signature; //0
+ UINT32 Length; //4
+ UINT8 Revision; //8
+ UINT8 Checksum; //9
+ UINT8 OEMID[6]; //10
+ UINT8 OEMTableID[8]; //16
+ UINT32 OEMRevision; //24
+ UINT32 CreatorID; //28
+ UINT32 CreatorRevision; //32
+ UINT32 ProtectionFlags; //36
+} ACPI_WINDOWS_SMM_SECURITY_MITIGATIONS_STRUCTURE;
+
+#define ACPI_WINDOWS_SMM_SECURITY_MITIGATIONS_STRUCTURE_SIGNATURE SIGNATURE_32('W', 'S', 'M', 'T')
+
+//
+//note: ProtectionFlags , BIT0=FIXED_COMM_BUFFERS , BIT1=COMM_BUFFER_NESTED_PTR_PROTECTION , BIT2=SYSTEM_RESOURCE_PROTECTION
+//
+
+/*
+FIXED_COMM_BUFFERS - Firmware setting this bit should refer to the SMM Communication ACPI Table defined in the UEFI 2.6 specification.
+ Firmware should also consider all other possible data exchanges between SMM and non-SMM,
+ including but not limited to EFI_SMM_COMMUNICATION_PROTOCOL, ACPINVS in ASL code,
+ general purpose registers as buffer pointers, etc.
+
+COMM_BUFFER_NESTED_PTR_PROTECTION - Firmware setting this bit must also set the FIXED_COMM_BUFFERS bit.
+
+SYSTEM_RESOURCE_PROTECTION - After ExitBootServices(), firmware setting this bit shall not allow any software to make changes
+ to the locations of IOMMU's, interrupt controllers, PCI Configuration Space,
+ the Firmware ACPI Control Structure (FACS), or any registers reported through ACPI fixed tables
+ (e.g. PMx Control registers, reset register, etc.).
+ This also includes disallowing changes to RAM layout and ensuring that decodes to RAM
+ and any system resources as described above take priority over software configurable registers.
+ For example, if software configures a PCI Express BAR to overlay RAM,
+ accesses by the CPU to the affected system physical addresses must decode to RAM.
+*/
+
+#define ACPI_WINDOWS_SMM_SECURITY_MITIGATIONS_PROTECTION_FLAGS 0x00000000
+#define FIXED_COMM_BUFFERS BIT0
+#define COMM_BUFFER_NESTED_PTR_PROTECTION BIT1
+#define SYSTEM_RESOURCE_PROTECTION BIT2
+
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wsmt/Wsmt.act b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wsmt/Wsmt.act new file mode 100644 index 0000000000..334c58df38 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/Wsmt/Wsmt.act @@ -0,0 +1,82 @@ +/** @file
+ ACPI WSMT table
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "WSMT.h"
+
+
+ACPI_WINDOWS_SMM_SECURITY_MITIGATIONS_STRUCTURE Wsmt = {
+ ACPI_WINDOWS_SMM_SECURITY_MITIGATIONS_STRUCTURE_SIGNATURE,
+ sizeof (ACPI_WINDOWS_SMM_SECURITY_MITIGATIONS_STRUCTURE),
+
+ //Revision
+ 0x00,
+
+ //Checksum
+ 0x00,
+
+ //OEMID
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+
+ //OEMTableID
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+
+ //OEMRevision
+ 0x00000000,
+
+ //CreatorID
+ 0x00000000,
+
+ //CreatorRevision
+ 0x00000000,
+
+ //ProtectionFlags
+ ACPI_WINDOWS_SMM_SECURITY_MITIGATIONS_PROTECTION_FLAGS,
+
+};
+
+
+#ifdef __GNUC__
+VOID*
+ReferenceAcpiTable (
+ VOID
+ )
+{
+ //
+ // Reference the table being generated to prevent the optimizer from removing the
+ // data structure from the exeutable
+ //
+ return (VOID*)&Wsmt;
+}
+#else
+VOID
+main (
+ VOID
+ )
+
+{
+}
+#endif
\ No newline at end of file diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/token.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/token.asl new file mode 100644 index 0000000000..3716dc28d3 --- /dev/null +++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/token.asl @@ -0,0 +1,55 @@ +/** @file
+ Copyright (c) 2012 - 2016, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+Name(SP3O, 0x2e) // Super I/O (Winbond 3xx) Index/Data configuration port for ASL.
+Name(IO4B, 0xa20) // Super I/O (Winbond 3xx) GPIO base address
+Name(IO4L, 0x20) // Super I/O (Winbond 3xx) GPIO base address length
+Name(SP1O, 0x4e) // Super IO Index/Data configuration port for ASL.
+Name(PMBS, 0x400) // ASL alias for ACPI I/O base address.
+Name(SMIP, 0xb2) // I/O port to trigger SMI
+Name(APCB, 0xfec00000) // Default I/O APIC(s) memory start address, 0x0FEC00000 - default, 0 - I/O APIC's disabled
+Name(APCL, 0x1000) // I/O APIC(s) memory decoded range, 0x1000 - default, 0 - I/O APIC's not decoded
+Name(PMCB, 0xfed03000) // PMC Base Address
+Name(IBAS, 0xfed08000) // ILB Base Address
+Name(SRCB, 0xfed1c000) // RCBA (Root Complex Base Address)
+Name(HPTB, 0xfed00000) // Same as HPET_BASE_ADDRESS for ASL use
+Name(PEBS, 0xe0000000) //
+Name(PELN, 0x10000000) //
+Name(FMBL, 0x1) // Platform Flavor - Mobile flavor for ASL code.
+Name(FDTP, 0x2) // Platform Flavor - Desktop flavor for ASL code.
+Name(GCDD, 0x1) // GET_CURRENT_DISPLAY_DEVICE_SMI
+Name(DSTA, 0xa) // DISPLAY_SWITCH_TOGGLE_ACPI_SMI
+Name(DSLO, 0x2) // DISPLAY_SWITCH_LID_OPEN_ACPI_SMI
+Name(DSLC, 0x3) // DISPLAY_SWITCH_LID_CLOSE_ACPI_SMI
+Name(PITS, 0x10) // POPUP_ICON_TOGGLE_SMI
+Name(SBCS, 0x12) // SET_BACKLIGHT_CONTROL_SMI
+Name(SALS, 0x13) // SET_ALI_LEVEL_SMI
+Name(LSSS, 0x2a) // LID_STATE_SWITCH_SMI
+Name(PSSS, 0x2b) // POWER_STATE_SWITCH_SMI
+Name(SOOT, 0x35) // SAVE_OSB_OS_TYPE_SMI
+Name(ESCS, 0x48) // ENABLE_SMI_C_STATE_COORDINATION_SMI
+Name(SDGV, 0x1c) // UHCI Controller HOST_ALERT's bit offset within the GPE block. GPIO[0:15] corresponding to GPE[16:31]
+Name(ACPH, 0xde) // North Bridge Scratchpad Data Register for patch ACPI.
+Name(ASSB, 0x0) // ACPI Sleep State Buffer for BIOS Usage.
+Name(AOTB, 0x0) // ACPI OS Type Buffer for BIOS Usage.
+Name(AAXB, 0x0) // ACPI Auxiliary Buffer for BIOS Usage.
+Name(PEHP, 0x1) // _OSC: Pci Express Native Hot Plug Control
+Name(SHPC, 0x0) // _OSC: Standard Hot Plug Controller (SHPC) Native Hot Plug control
+Name(PEPM, 0x1) // _OSC: Pci Express Native Power Management Events control
+Name(PEER, 0x1) // _OSC: Pci Express Advanced Error Reporting control
+Name(PECS, 0x1) // _OSC: Pci Express Capability Structure control
+Name(ITKE, 0x0) // This will be overridden by the ITK module.
+Name(FTBL, 0x4) // Platform Flavor - Tablet flavor for ASL code.
+Name(GRBM, 0xF) // Board id for Gordon Ridge BMP MRB
+Name(MNHL, 0x5) // Board id for Mineral Hill
+
|