1 files changed, 163 insertions, 0 deletions
diff --git a/Platform/Intel/KabylakeOpenBoardPkg/Include/SioRegs.h b/Platform/Intel/KabylakeOpenBoardPkg/Include/SioRegs.h
new file mode 100644
index 0000000000..be14e2ab89
--- /dev/null
+++ b/Platform/Intel/KabylakeOpenBoardPkg/Include/SioRegs.h
@@ -0,0 +1,163 @@
+/** @file
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed and made available under
+the terms and conditions of the BSD License that accompanies this distribution.
+The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php.
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SIO_REG_H_
+#define _SIO_REG_H_
+
+#define REG_LOGICAL_DEVICE        0x07
+#define ACTIVATE                  0x30
+
+#define BASE_ADDRESS_HIGH0        0x60
+#define BASE_ADDRESS_LOW0         0x61
+#define BASE_ADDRESS_HIGH1        0x62
+#define BASE_ADDRESS_LOW1         0x63
+#define BASE_ADDRESS_HIGH2        0x64
+#define BASE_ADDRESS_LOW2         0x65
+#define BASE_ADDRESS_HIGH3        0x66
+#define BASE_ADDRESS_LOW3         0x67
+#define PRIMARY_INTERRUPT_SELECT  0x70
+#define WAKEUP_ON_IRQ_EN          0x70
+#define INTERRUPT_TYPE            0x71
+#define DMA_CHANNEL_SELECT0       0x74
+#define DMA_CHANNEL_SELECT1       0x75
+
+
+
+//
+//Port address for PILOT - III
+//
+#define PILOTIII_CHIP_ID         0x03
+#define PILOTIII_SIO_INDEX_PORT  0x04E
+#define PILOTIII_SIO_DATA_PORT   (PILOTIII_SIO_INDEX_PORT+1)
+
+#define PILOTIII_UNLOCK      0x5A
+#define PILOTIII_LOCK        0xA5
+
+//
+// logical device in PILOT-III
+//
+#define PILOTIII_SIO_PSR     0x00
+#define PILOTIII_SIO_COM2    0x01
+#define PILOTIII_SIO_COM1    0x02
+#define PILOTIII_SIO_SWCP    0x03
+#define PILOTIII_SIO_GPIO    0x04
+#define PILOTIII_SIO_WDT     0x05
+#define PILOTIII_SIO_KCS3    0x08
+#define PILOTIII_SIO_KCS4    0x09
+#define PILOTIII_SIO_KCS5    0x0A
+#define PILOTIII_SIO_BT      0x0B
+#define PILOTIII_SIO_SMIC    0x0C
+#define PILOTIII_SIO_MAILBOX 0x0D
+#define PILOTIII_SIO_RTC     0x0E
+#define PILOTIII_SIO_SPI     0x0F
+#define PILOTIII_SIO_TAP     0x10
+//
+// Regisgers for Pilot-III
+//
+#define PILOTIII_CHIP_ID_REG               0x20
+#define PILOTIII_LOGICAL_DEVICE            REG_LOGICAL_DEVICE
+#define PILOTIII_ACTIVATE                  ACTIVATE
+#define PILOTIII_BASE_ADDRESS_HIGH0        BASE_ADDRESS_HIGH0
+#define PILOTIII_BASE_ADDRESS_LOW0         BASE_ADDRESS_LOW0
+#define PILOTIII_BASE_ADDRESS_HIGH1        BASE_ADDRESS_HIGH1
+#define PILOTIII_BASE_ADDRESS_LOW1         BASE_ADDRESS_LOW1
+#define PILOTIII_PRIMARY_INTERRUPT_SELECT  PRIMARY_INTERRUPT_SELECT
+
+//
+// Port address for PC8374
+//
+#define PC8374_SIO_INDEX_PORT  0x02E
+#define PC8374_SIO_DATA_PORT   (PC8374_SIO_INDEX_PORT+1)
+
+//
+// Logical device in PC8374
+//
+#define PC8374_SIO_FLOPPY  0x00
+#define PC8374_SIO_PARA    0x01
+#define PC8374_SIO_COM2    0x02
+#define PC8374_SIO_COM1    0x03
+#define PC8374_SIO_MOUSE   0x05
+#define PC8374_SIO_KYBD    0x06
+#define PC8374_SIO_GPIO    0x07
+
+//
+// Registers specific for PC8374
+//
+#define PC8374_CLOCK_SELECT  0x2D
+#define PC8374_CLOCK_CONFIG  0x29
+
+//
+// Registers for PC8374
+//
+#define PC8374_LOGICAL_DEVICE            REG_LOGICAL_DEVICE
+#define PC8374_ACTIVATE                  ACTIVATE
+#define PC8374_BASE_ADDRESS_HIGH0        BASE_ADDRESS_HIGH0
+#define PC8374_BASE_ADDRESS_LOW0         BASE_ADDRESS_LOW0
+#define PC8374_PRIMARY_INTERRUPT_SELECT  PRIMARY_INTERRUPT_SELECT
+#define PC8374_DMA_CHANNEL_SELECT        DMA_CHANNEL_SELECT0
+
+#define PC87427_SERVERIO_CNF2           0x22
+
+
+//
+// Pilot III Mailbox Data Register definitions
+//
+#define MBDAT00_OFFSET                  0x00
+#define MBDAT01_OFFSET                  0x01
+#define MBDAT02_OFFSET                  0x02
+#define MBDAT03_OFFSET                  0x03
+#define MBDAT04_OFFSET                  0x04
+#define MBDAT05_OFFSET                  0x05
+#define MBDAT06_OFFSET                  0x06
+#define MBDAT07_OFFSET                  0x07
+#define MBDAT08_OFFSET                  0x08
+#define MBDAT09_OFFSET                  0x09
+#define MBDAT10_OFFSET                  0x0A
+#define MBDAT11_OFFSET                  0x0B
+#define MBDAT12_OFFSET                  0x0C
+#define MBDAT13_OFFSET                  0x0D
+#define MBDAT14_OFFSET                  0x0E
+#define MBDAT15_OFFSET                  0x0F
+#define MBST0_OFFSET                    0x10
+#define MBST1_OFFSET                    0x11
+#define MBBINT_OFFSET                   0x12
+
+//
+// Mailbox Bit definitions...
+//
+#define   MBBINT_MBBIST_BIT               0x80
+// If both are there, use the default one
+//
+#define  W83527_EXIST     BIT2
+#define  PC8374_EXIST     BIT1
+#define  PILOTIII_EXIST   BIT0
+#define  DEFAULT_SIO      PILOTIII_EXIST
+#define  DEFAULT_KDB      PC8374_EXIST
+
+#define IPMI_DEFAULT_SMM_IO_BASE           0xca2
+//
+// For Pilot III
+//
+
+#define PILOTIII_SWC_BASE_ADDRESS          0xA00
+#define PILOTIII_PM1b_EVT_BLK_BASE_ADDRESS 0x0A80
+#define PILOTIII_PM1b_CNT_BLK_BASE_ADDRESS 0x0A84
+#define PILOTIII_GPE1_BLK_BASE_ADDRESS     0x0A86
+#define PILOTIII_KCS3_DATA_BASE_ADDRESS    0x0CA4
+#define PILOTIII_KCS3_CMD_BASE_ADDRESS     0x0CA5
+#define PILOTIII_KCS4_DATA_BASE_ADDRESS    0x0CA2
+#define PILOTIII_KCS4_CMD_BASE_ADDRESS     0x0CA3
+#define PILOTIII_MAILBOX_BASE_ADDRESS      0x0600
+#define PILOTIII_MAILBOX_MASK              0xFFE0
+#define BMC_KCS_BASE_ADDRESS               0x0CA0
+#endif